7/29/2019 A-17_Strt Socket Well Asmbl

1/1

2004 Smart Sensors 1920 Aldine Western Houston, TX 77038 Phone: 281-272-5333 Fax: 281-272-5332

Straight Socket Well Assemblies

Head Type Extension A Length Well Type U Length Well Material T Length Sensor Type Options

(inches) (inches) Calibration OD Junction Sheath

EXTENSIONN Nipple Galvanized

NUN Nipple/Union/Nipple GalvanizedNS Nipple Stainless SteelNUNS Nipple/Union/Nipple Stainless SteelPNUN Pressure Seal in Union GalvanizedPNUNS Pressure Seal in Union Stainless SteelSee pagSee pagSee pagSee pagSee page A-7 for ae A-7 for ae A-7 for ae A-7 for ae A-7 for additional information.dditional information.dditional information.dditional information.dditional information.

SENSOR TYPESensor CalibrationJ Iron ConstantanK Chromel AlumelT Copper ConstantanE Chromel ConstantaN Nicrosil NisilPO Low Temp RTD to 500PH High Temp RTD to 90PM Heavy Duty RTD to

1100 FStandard RTD is a three-wireStandard RTD is a three-wireStandard RTD is a three-wireStandard RTD is a three-wireStandard RTD is a three-wire100 ohm Platinum / .00385100 ohm Platinum / .00385100 ohm Platinum / .00385100 ohm Platinum / .00385100 ohm Platinum / .00385Alpha . For spec ial lim it s onAlp ha. For spec ia l limi ts onAlpha . For spec ial lim it s onAlp ha. For spec ia l limi ts onAlp ha. For sp ec ia l limit s onthermocouples, repeatthermocouples, repeatthermocouples, repeatthermocouples, repeatthermocouples, repeatcalibration code, i.e. JJ. Forcalibration code, i.e. JJ. Forcalibration code, i.e. JJ. Forcalibration code, i.e. JJ. Forcalibration code, i.e. JJ. ForSmart Stuff sensors use S preSmart Stuff sensors use S preSmart Stuff sensors use S preSmart Stuff sensors use S preSmart Stuff sensors use S prein front of calibration code.in front of calibration code.in front of calibration code.in front of calibration code.in front of calibration code.

Sensor OD316 3/16"14 1/4"516 5/16"38 3/8"

Sensor JunctionG GroundedU UngroundedE ExposedDG Dual GroundedDU Dual UngroundedDE Dual Exposed

S Single RTDD Dual RTD

Sensor Sheath MateriaP 304SSR 316SSQ 310SSA Alloy 600Standard Sheath Material is 316SS.

THERMOWELL

A

U

A Alloy 600AA Alloy 20B Hastelloy BC Hastelloy CD 321SSF 347SSH 446SSI Alloy 800LP Low Carbon 304SSLR Low Carbon 316SS

M Monel 400N NickelP 304SSQ 310SSR 316SSS Carbon SteelT TeflonV Alloy 825W Alloy 601Y Brass

Sensor OD

Type Pipe Size Actual Dimensions inNominal Diameter (P) Inches (OD 1)

SWS0 3/4" 1.050 3/4"

SWS1 1" 1.315 7/8"

To order: To specify a complete assembly, indicate the code letter or value for each requirement. To order a well only, fill inonly the boxes in brackets. Add a nipple or nipple-union-nipple to a well by including the extension code and A length inaddition to the well codes.

1/4"

.260bore

OD1

Add X to the end of the order codeAdd X to the end of the order codeAdd X to the end of the order codeAdd X to the end of the order codeAdd X to the end of the order code of metall ic heads,of metall ic heads,of metall ic heads,of metall ic heads,of metallic heads, (i.e. EHAX,(i.e. EHAX,(i.e. EHAX,(i.e. EHAX,(i.e. EHAX,))))) to add ato add ato add ato add ato add acorrosion resistant epoxy coating to meet NEMA 4X rating.corrosion resistant epoxy coating to meet NEMA 4X rating.corrosion resistant epoxy coating to meet NEMA 4X rating.corrosion resistant epoxy coating to meet NEMA 4X rating.corrosion resistant epoxy coating to meet NEMA 4X rating. For detailedFor detailedFor detailedFor detailedFor detaileddescriptiondescriptiondescriptiondescriptiondescription and orderingand orderingand orderingand orderingand ordering of heads see pagesof heads see pagesof heads see pagesof heads see pagesof heads see pages A-5 and A-6.A-5 and A-6.A-5 and A-6.A-5 and A-6.A-5 and A-6.

HEAD TYPE0 No HeadCA Cast AluminumCI Cast IronCSS Cast Stainless SteelLCA Large Cast AluminumPP Polypropylene (Black)PPS Polypropylene Sanitary

FTA Flip Top AluminumFTP Flip Top Poly (white)EPA Explosion Proof AluminumEPS Explosion Proof Stainless SteelEHA Explosion Proof AluminumEHI Explosion Proof Iron

PT

(1.75std.)

Transmitter/Indicator OptioLCR Fixed Range Type, RTD, FMLCS Programmable, Non FMPT Programmable FMHC Hart CompatibleProvide Range and Temp F/CSee pages A-33 A36 for additional transminformation.

TI Temperature Indicator (use wtransmitter)

Sensor OptionsS Smart Stuff GA Grade A RTDTW Two Wire RTDFW Four Wire RTDHV High Vibration RTD (PM only)CR Cryogenic RTD (PM only)CT Compensated Terminals

(EHA/EHI head only)

OPTIONS

AO Alumina Oxide CoatingHT Hydrostatic Testing to 10,000 psiNC NACE Certification for WellOC Oxygen CleanedST Stellite CoatingTF Teflon Coating

VC Velocity CalculationsBC Brass Plug and ChainSC SS Plug and ChainWB .385 BoreIf other than .385 Bore is required,specify bore size.

Thermowell Options

Well Materials For other materials, see page B-6.

A

Options