2
KAMAT GmbH & Co. KG Salinger Feld 10, 58454 Witten, Germany, Fon +49 (0)23 02 / 89 03-0, Fax +49 (0)23 02 / 80 19 17, [email protected], www.KAMAT.de The right to technical changes is reserved. In a tank farm in Poland it was necessary to remove the coating on a collection basin underneath storage tanks. At the same time, the subsurface (concrete and brickwork) had to be prepared for a subsequent coating which is resistant to oil and moisture. After treatment, the adhesive strength of the subsurface was not less than 1.5 N / mm². Application Report No. A 30-2e Page 1/2 Decoating a Collection Basin Under Status: 10/2005 Storage Tanks PIOMAR, Poland The job was done using an Orbital Nozzle, at a working pressure of 1000 - 1100 bar. Photo on the right: Both the old plaster layer and the old coating were removed from the brickwork foundation

A 30-2e Decoating a basin of a storage tank · Salinger Feld 10, 58454 Witten, Germany, Fon +49 (0)23 02 / 89 03-0, Fax +49 (0)23 02 / 80 19 17, [email protected], The right to technical

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: A 30-2e Decoating a basin of a storage tank · Salinger Feld 10, 58454 Witten, Germany, Fon +49 (0)23 02 / 89 03-0, Fax +49 (0)23 02 / 80 19 17, info@KAMAT.de, The right to technical

KAMAT GmbH & Co. KG Salinger Feld 10, 58454 Witten, Germany, Fon +49 (0)23 02 / 89 03-0, Fax +49 (0)23 02 / 80 19 17, [email protected], www.KAMAT.de

The right to technical changes is reserved.

In a tank farm in Poland it was necessary to remove the coating on a collection basin underneath storage tanks. At the same time, the subsurface (concrete and brickwork) had to be prepared for a subsequent coating which is resistant to oil and moisture. After treatment, the adhesive strength of the subsurface was not less than 1.5 N / mm².

Application Report No. A 30-2e Page 1/2

Decoating a Collection Basin Under Status: 10/2005

Storage Tanks PIOMAR, Poland

The job was done using an Orbital Nozzle, at a working pressure of 1000 - 1100 bar.

Photo on the right: Both the old plaster layer and the old coating were removed from the brickwork foundation

Page 2: A 30-2e Decoating a basin of a storage tank · Salinger Feld 10, 58454 Witten, Germany, Fon +49 (0)23 02 / 89 03-0, Fax +49 (0)23 02 / 80 19 17, info@KAMAT.de, The right to technical

KAMAT GmbH & Co. KG Salinger Feld 10, 58454 Witten, Germany, Fon +49 (0)23 02 / 89 03-0, Fax +49 (0)23 02 / 80 19 17, [email protected], www.KAMAT.de

The right to technical changes is reserved.

The photos on this page show how the work was carried out using a high pressure gun KSP 1200 and an Orbital Nozzle. Treated surface Untreated surface

Application Report No. A 30-2e Page 2/2

Decoating a Collection Basin Under Status: 10/2005

Storage Tanks PIOMAR, Poland

Application Report No. A 30-2e Page 1/2

Decoating a Collection Basin Under Status: 10/2005

Storage Tanks PIOMAR, Poland

Application Report No. A 30-2e Page 2/2

Decoating a Collection Basin Under Status: 10/2005

Storage Tanks PIOMAR, Poland

Photo above: After treatment, the roughened and cleaned concrete is clearly visible. This surface is ideal for applying a new coating.