Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
SIKO PUMP, specialized chemical handing pump manufacturer (www.sikopump.com) metering pump, magnetic driving pump, diaphragm pump, bellows pump, rotary pump… …
A CATALOUGE FOR MPD MECHANICAL DIAPHRAGM METERING PUMP
FactoryWarranty
1 Full Year
Food & Beverage
Mining
Pharmaceutical
Pulp & Paper
Power & Energy
Water Treatment
Paints & Dyes
Petrochemical
Catalogue No. SIKO-MPD-003
SIKO PUMP
Introduction of Metering Pump
Working Principle of the Metering Pump
The metering pump is a positive displacement chemical dosing device with the ability to vary capacity manually or automatically as process conditions require. It features a high level of repetitive accuracy and is capable of pumping a wide range of chemicals including acids, bases, corrosives or viscous liquids and slurries.
The pumping action is developed by a reciprocating piston which is either in direct contact, with the process fluid, or is shielded from the fluid by a diaphragm. Diaphragms are actuated by hydraulic fluid between the piston and the diaphragm.
Metering pumps are generally used in applications where one or more of the following conditions exist:
Low flow rates in l/hr or GPH are required High system pressure exists High accuracy feed rate is demanded Corrosive, hazardous, or high temperature fluids are handled Viscous fluids or slurries need to be pumped
Metering pumps normally comprise of a motor, gearbox and pump head. The gear reduces the motor speed and converts the rotary motion into a reciprocating movement of a plunger in the pump head.
The plunger movement generates a stream of liquid utilizing a suction and discharge valve that are opened and closed alternately. Suction and discharge valves are self-acting.
Flow rate of a metering pump is basically defined by the plunger diameter, stroke length and stroking speed.
Usually the metering pumps are divided into three types, according to the metering pump Liquid End Structure:
Piston/plunder Metering Pump--In this type metering pump, the liquid end is just the piston, so the piston will contact the liquid directly. The pump structure is simple, but need packing seal for the piston, and also the piston type pump can reach a high pressure
Mechanical Actuated Diaphragm Metering Pump---In this type pump, the liquid end is changed into a diaphragm. So the liquid is complete separated. It is widely used for Corrosive, hazardous liquid. But this pump pressure can be no very high
Hydraulic Actuated Diaphragm Metering Pump---Similar as the mechanical diaphragm type, the liquid is completely separated, and by apply the hydraulic power, it can get much higher pressure than the mechanical type.
In this catalogue, we will discuss Mechanical Actuated Diaphragm
Metering Pump
Type of Metering Pump(Liquid end)
Common Drive Mechanism(Drive mechanism end)
As for the metering pump drive mechanism end, usually they have a similar structure. The worm wheel and worm transfer the motor’s rotating movement into piston/plunger’s reciprocating movement
SIKO PUMP
SIKO PUMP
SIKO PUMPSIKO PUMP
SIKO PUMP
www.sikopump.com [email protected]
SIKO PUMP --- Chemical Handing Pump Solutions Page 1
MPD mechanical diaphragm metering pump features
Capacity range: 9 L/H to 3200 L/H Pressure range: 0.3 Mpa to 1.0 Mpa Connection size: 8 mm to 40 mm Power range: 0.025 kw to 1.5 kw
Pump head material(liquid end): SS304,SS316,PVC and PTFE Pump diaphragm material: composite layers PTFE Media Temperature: -10 to 50 degree(Stainless type, max to 100) Viscosity range: 0 to 800mm2/s Steady state accuracy: +/- 2% Suggested adjustment range: 40% to 100%
Seal without leakage Liquid is completely isolated by the diaphragm, so pump have 100% proof of leakage. It is very good for the viscous, poisonous, corrosive liquid handing.
Easy maintenance There are only several parts of components of pump. It has the simple structure, so it needs easy maintenance. Usually only need to change Lub. oil and diaphragm.
Pump head material Besides SS304 and SS316 material, the pump head can be PVC, PTFE and other material. So, this will help the pump to delivery a wide range of chemical liquid type.
Double diaphragm Although the diaphragm pump has a good seal, for safety, pump can be in double diaphragm type with an alarm system, it will stop the pump when one diaphragm breaks.
Economical and reliable, with mechanical actuated diaphragm, the MPD series is an ideal solution for industrial applications where chemicals have to be pumped safely at low pressure.A very low maintenance is one of the main reasons to choose this model.
Catalouge for MPD Diaphragm Metering Pump
www.sikopump.com [email protected]
SIKO PUMP --- Chemical Handing Pump Solutions Page 2
SIKO PUMP
SIK
O P
UM
P
SIK
O P
UM
P
SIK
O P
UM
P
Mechanical diaphragm metering pump working principles
Mechanically actuated pump operate with a plunger directly attached to the diaphragm. This attachment generally takes place from a bolt and clamp being placed through the plunger and through the diaphragm. The direct attachment of the position to the diaphragm connects the pump’s drive and motor to the liquid end. The motion of the pump drive moves the plunger back and forth, thereby causing suction from the supply tank and pumping the fluid of choice through the attached conveyance infrastructure. Maximum life of the pump can be achieved by replacing the diaphragm at the recommended service interval.
Optional device or accessories
Different pump head material Pump head (liquid end) material can be SS314, SS306, PVC and PTFE.
Double diaphragm and alarm system Suitable for delivering viscous, poisonous, corrosive liquid, if one diaphragm broke, pump will stop and send out an alarm.
Double pump head type With double pump head, pump capacity is twice about the single type one.
Remote control system Outside 4-20mA signal can be inputted into pump to control the pump operation.
Double diaphragm systemDouble head type
PTEF SS PVC
www.sikopump.com [email protected]
SIKO PUMP --- Chemical Handing Pump Solutions Page 3
SIKO PUMP
MPDT1 Mechanical Diaphragm Metering Pump Capacity range: 9 L/H to 120 L/H, Pressure range: 0.4 Mpa to 1.0 Mpa
Capacity Head Stroke. Power Inlet/outlet size Net weight NO. Model
L/H Mpa Per min w mm kg
1 MPDT1-9/1.0 9 1.0 120 25 Φ8mm pipe 4.5 2 MPDT1-15/0.5 15 0.5 120 25 Φ8mm pipe 4.5 3 MPDT1-25/0.5 25 0.5 120 25 Φ8mm pipe 4.5 4 MPDT2-32/.04 32 0.4 120 25 Φ8mm pipe 4.5
Note: For MPDT1 pump, the soft tube, fitter vale and injection valve will be supplied together with the pump. Pump Identification
Material Working condition
Spare part Material Pump Head PVC,PTFE,SS304,SS316 Metering Valve SS304,SS316 Ball valve Silicon dioxide,SS304,SS316,Ceramic Seal PTFE Diaphragm Quality PTFE
Dimension (mm)
Envir. temperature: -30 to 60 degree Liquid temperature: 0 to 50 degree Liquid viscosity: 0.3 to 800mm/s Electrical source: 1or 3 phase, 50Hz/60Hz, 220V/380V/440V Motor type: IEC, IP45 or IP55(explosion-proof type) Adjustment range and accuracy: 40% to 100% at +/- 1% Adjust model: by hand. Self-priming ability: small.
MP D T1 - 32/ 0.4Pump rated pressure (Mpa)Pump max capacity (L/H)Pump base size
T---tiny size, S---Small size, M---Middle size, B---big size
(Pump base size has close relation with pump capacity)1 or 2 means different sizes in one pump base size level
Metering Pump TypeD---diaphragm metering pump(mechancial type)P---piston/plunger metering pumpH---hydraulic diaphragm metering pump
Short word for "metering pump"
Catalouge for MPD Diaphragm Metering Pump
www.sikopump.com [email protected]
SIKO PUMP --- Chemical Handing Pump Solutions Page 4
SIKO PUMP
SIKO PUMPSIKO PUMP
SIKO PUMP
SIKO PUMP
MPDT2 Mechanical Diaphragm Metering Pump Capacity range: 10 L/H to 120 L/H, Pressure range: 0.4 Mpa to 1.0 Mpa
Capacity Head Stroke. Power Inlet/outlet size Net weight NO. Model
L/H Mpa Per min w mm kg
1 MPDT2-10/1.0 10 1.0 75 60 6 2 MPDT2-20/1.0 20 1.0 100 60 6 3 MPDT2-40/0.8 40 0.8 120 60 6 4 MPDT2-60/0.6 60 0.6 100 60 10 5 MPDT2-80/0.5 80 0.5 100 60 10 6 MPDT2-100/0.4 100 0.4 120 60 10 7 MPDT2-120/0.4 120 0.4 150 60 10
Pump Identification
Material Working condition
Spare part Material Pump Head PVC,PTFE,SS304,SS316 Metering Valve SS304,SS316 Ball valve Silicon dioxide,SS304,SS316,Ceramic Seal PTFE Diaphragm Quality PTFE
Dimension (mm)
Envir. temperature: -30 to 60 degree Liquid temperature: 0 to 50 degree Liquid viscosity: 0.3 to 800mm/s Electrical source: 1or 3 phase, 50Hz/60Hz, 220V/380V/440V Motor type: IEC, IP45 or IP55(explosion-proof type) Adjustment range and accuracy: 40% to 100% at +/- 1% Adjust model: by hand. Self-priming ability: small.
MP D T2 - 10/ 1.0Pump rated pressure (Mpa)Pump max capacity (L/H)Pump base size
T---tiny size, S---Small size, M---Middle size, B---big size
(Pump base size has close relation with pump capacity)1 or 2 means different sizes in one pump base size level
Metering Pump TypeD---diaphragm metering pump(mechancial type)P---piston/plunger metering pumpH---hydraulic diaphragm metering pump
Short word for "metering pump"
Catalouge for MPD Diaphragm Metering Pump
www.sikopump.com [email protected]
SIKO PUMP --- Chemical Handing Pump Solutions Page 5
SIKO PUMP
SIKO PUMP
SIKO PUMP
MPDS1 Mechanical Diaphragm Metering Pump Capacity range: 80 L/H to 240 L/H, Pressure range: 0.6 Mpa to 1.0 Mpa
Capacity Head Stroke. Power Inlet/outlet size Net weight NO. Model
L/H Mpa Per min w mm kg
1 MPDS1-80/0.6 80 0.6 48 0.37 DN15 18 2 MPDS1-120/0.5 120 0.5 72 0.37 DN15 18 3 MPDS1-160/0.5 160 0.5 96 0.37 DN15 18 4 MPDS1-240/0.4 240 0.4 144 0.55 DN15 18
Pump Identification
Material Working condition
Spare part Material Pump Head PVC,PTFE,SS304,SS316 Metering Valve SS304,SS316 Ball valve Silicon dioxide,SS304,SS316,Ceramic Seal PTFE Diaphragm Quality PTFE
Dimension (mm)
Envir. temperature: -30 to 60 degree Liquid temperature: 0 to 50 degree Liquid viscosity: 0.3 to 800mm/s Electrical source: 1or 3 phase, 50Hz/60Hz, 220V/380V/440V Motor type: IEC, IP45 or IP55(explosion-proof type) Adjustment range and accuracy: 40% to 100% at +/- 1% Adjust model: by hand. Self-priming ability: small.
MP D S1 - 80/ 0.6Pump rated pressure (Mpa)Pump max capacity (L/H)Pump base size
T---tiny size, S---Small size, M---Middle size, B---big size
(Pump base size has close relation with pump capacity)1 or 2 means different sizes in one pump base size level
Metering Pump TypeD---diaphragm metering pump(mechancial type)P---piston/plunger metering pumpH---hydraulic diaphragm metering pump
Short word for "metering pump"
Catalouge for MPD Diaphragm Metering Pump
www.sikopump.com [email protected]
SIKO PUMP --- Chemical Handing Pump Solutions Page 6
SIKO PUMP
SIKO PUMP
SIKO PUMP
MPDS2 Mechanical Diaphragm Metering Pump Capacity range: 20 L/H to 120 L/H, Pressure range: 0.5 Mpa to 0.8 Mpa
Capacity Head Stroke. Power Inlet/outlet size Net weight NO. Model
L/H Mpa Per min w mm kg
1 MPDS2-20/0.8 20 0.8 48 0.18 Φ8mm 8 2 MPDS2-40/0.6 40 0.6 96 0.18 Φ8mm 8 3 MPDS2-60/0.6 60 0.6 48 0.18 DN15 8 4 MPDS2-80/0.5 80 0.5 96 0.18 DN15 8 5 MPDS2-120/0.5 120 0.5 96 0.18 DN15 8
Pump Identification
Material Working condition
Spare part Material Pump Head PVC,PTFE,SS304,SS316 Metering Valve SS304,SS316 Ball valve Silicon dioxide,SS304,SS316,Ceramic Seal PTFE Diaphragm Quality PTFE
Dimension (mm)
Envir. temperature: -30 to 60 degree Liquid temperature: 0 to 50 degree Liquid viscosity: 0.3 to 800mm/s Electrical source: 1or 3 phase, 50Hz/60Hz, 220V/380V/440V Motor type: IEC, IP45 or IP55(explosion-proof type) Adjustment range and accuracy: 40% to 100% at +/- 1% Adjust model: by hand or by remote control system Self-priming ability: small.
MP D S2 - 20/ 0.8Pump rated pressure (Mpa)Pump max capacity (L/H)Pump base size
T---tiny size, S---Small size, M---Middle size, B---big size
(Pump base size has close relation with pump capacity)1 or 2 means different sizes in one pump base size level
Metering Pump TypeD---diaphragm metering pump(mechancial type)P---piston/plunger metering pumpH---hydraulic diaphragm metering pump
Short word for "metering pump"
Catalouge for MPD Diaphragm Metering Pump
www.sikopump.com [email protected]
SIKO PUMP --- Chemical Handing Pump Solutions Page 7
SIKO PUMPS
IKO
PU
MP
SIKO PUMP
SIK
O P
UM
P
MPDM1 Mechanical Diaphragm Metering Pump Capacity range: 180 L/H to 560 L/H, Pressure range: 0.3 Mpa to 0.5 Mpa
Capacity Head Stroke. Power Inlet/outlet size Net weight NO. Model
L/H Mpa Per min w mm kg
1 MPDM1-180/0.5 180 0.5 48 0.55 DN25 25 2 MPDM1-280/0.5 280 0.5 72 0.55 DN25 25 3 MPDM1-360/0.4 360 0.4 96 0.55 DN25 25 4 MPDM1-450/0.4 450 0.3 144 0.55 DN25 25 5 MPDM1-560/0.3 560 0.3 144 0.55 DN25 25
Pump Identification
Material Working condition
Spare part Material Pump Head PVC,PTFE,SS304,SS316 Metering Valve SS304,SS316 Ball valve Silicon dioxide,SS304,SS316,Ceramic Seal PTFE Diaphragm Quality PTFE
Dimension (mm)
Envir. temperature: -30 to 60 degree Liquid temperature: 0 to 50 degree Liquid viscosity: 0.3 to 800mm/s Electrical source: 1or 3 phase, 50Hz/60Hz, 220V/380V/440V Motor type: IEC, IP45 or IP55(explosion-proof type) Adjustment range and accuracy: 40% to 100% at +/- 1% Adjust model: by hand or by remote control system Self-priming ability: small.
MP D M1 -180/ 0.5Pump rated pressure (Mpa)Pump max capacity (L/H)Pump base size
T---tiny size, S---Small size, M---Middle size, B---big size
(Pump base size has close relation with pump capacity)1 or 2 means different sizes in one pump base size level
Metering Pump TypeD---diaphragm metering pump(mechancial type)P---piston/plunger metering pumpH---hydraulic diaphragm metering pump
Short word for "metering pump"
Catalouge for MPD Diaphragm Metering Pump
www.sikopump.com [email protected]
SIKO PUMP --- Chemical Handing Pump Solutions Page 8
SIKO PUMP
SIKO PUMP
SIKO PUMP
MPDM2 Mechanical Diaphragm Metering Pump
Capacity Head Stroke. Power Inlet/outlet size Net weight NO. Model
L/H Mpa Per min w mm kg
1 MPDM2-25/1.0 25 1.0 48 0.37 Φ8mm 22 2 MPDM2-50/1.0 50 1.0 48 0.37 DN15 22 3 MPDM2-80/0.7 80 0.7 96 0.37 DN15 22 4 MPDM2-120/0.7 120 0.7 48 0.37 DN15 22 5 MPDM2-170/0.7 170 0.7 96 0.37 DN15 22 6 MPDM2-240/0.5 240 0.5 96 0.37 DN15 22 7 MPDM2-320/0.5 320 0.5 144 0.55 DN15 28 8 MPDM2-420/0.5 420 0.5 144 0.55 DN15 28
Pump Identification
Material
Working condition Spare part Material Pump Head PVC,PTFE,SS304,SS316 Metering Valve SS304,SS316 Ball valve Silicon dioxide,SS304,SS316,Ceramic Seal PTFE Diaphragm Quality PTFE
Dimension (mm)
Envir. temperature: -30 to 60 degree Liquid temperature: 0 to 50 degree Liquid viscosity: 0.3 to 800mm/s Electrical source: 1or 3 phase, 50Hz/60Hz, 220V/380V/440V Motor type: IEC, IP45 or IP55(explosion-proof type) Adjustment range and accuracy: 40% to 100% at +/- 1% Adjust model: by hand or by remote control system Self-priming ability: small.
MP D M2 - 25/ 1.0Pump rated pressure (Mpa)Pump max capacity (L/H)Pump base size
T---tiny size, S---Small size, M---Middle size, B---big size
(Pump base size has close relation with pump capacity)1 or 2 means different sizes in one pump base size level
Metering Pump TypeD---diaphragm metering pump(mechancial type)P---piston/plunger metering pumpH---hydraulic diaphragm metering pump
Short word for "metering pump"
Capacity range: 25 L/H to 420 L/H, Pressure range: 0.5 Mpa to 1.0 Mpa
Catalouge for MPD Diaphragm Metering Pump
www.sikopump.com [email protected]
SIKO PUMP --- Chemical Handing Pump Solutions Page 9
SIKO PUMPS
IKO
PU
MP
SIKO PUMP
MPDB Mechanical Diaphragm Metering Pump Capacity range: 380 L/H to 1600 L/H(single head),3200L/H(double head), Pressure range: 0.3 Mpa to 0.6 Mpa
Capacity Head Stroke. Power Inlet/outlet size Net weight NO. Model L/H Mpa Per min w mm kg
1 MPDB-380/0.6 380 0.6 96 0.75 DN25mm 40
2 MPDB-500/0.6 500 0.6 96 0.75 DN25mm 40
3 MPDB-800/0.5 800 0.5 144 0.75 DN25mm 40
4 MPDB-1000/0.4 1000 0.4 144 1.1 DN25mm 40
5 MPDB-1400/0.3 1400 0.3 144 1.5 DN40mm 50
6 MPDB-1600/0.3 1600 0.3 144 1.5 DN40mm 50
7 2MPDB-1200/0.5 1200 0.5 96 1.5 DN25mm 70
8 2MPDB-1500/0.5 1500 0.5 96 1.5 DN25mm 70
9 2MPDB-2000/0.4 2000 0.4 144 1.5 DN25mm 70
10 2MPDB-2500/0.3 2500 0.3 144 1.5 DN40mm 75
11 2MPDB-3200/0.3 3200 0.3 144 1.5 DN40mm 75
Pump Identification
Material Working condition
Spare part Material Pump Head PVC,PTFE,SS304,SS316 Metering Valve SS304,SS316 Ball valve Silicon dioxide,SS304,SS316,Ceramic Seal PTFE Diaphragm Quality PTFE
Dimension (mm)
Envir. temperature: -30 to 60 degree Liquid temperature: 0 to 50 degree Liquid viscosity: 0.3 to 800mm/s Electrical source: 1or 3 phase, 50Hz/60Hz, 220V/380V/440V Motor type: IEC, IP45 or IP55(explosion-proof type) Adjustment range and accuracy: 40% to 100% at +/- 1% Adjust model: by hand or by remote control system Self-priming ability: small.
MP D B -380/ 0.6Pump rated pressure (Mpa)Pump max capacity (L/H)Pump base size
T---tiny size, S---Small size, M---Middle size, B---big size
(Pump base size has close relation with pump capacity)1 or 2 means different sizes in one pump base size level
Metering Pump TypeD---diaphragm metering pump(mechancial type)P---piston/plunger metering pumpH---hydraulic diaphragm metering pump
Short word for "metering pump"
Note: 2 means double head type pump
Catalouge for MPD Diaphragm Metering Pump
www.sikopump.com [email protected]
SIKO PUMP --- Chemical Handing Pump Solutions Page 10
SIKO PUMP
SIK
O P
UM
P
SIKO PUMP SIKO PUMP
SIKO PUMP, specialized chemical handing pump manufacturer. Metering pump, magnetic driving pump, diaphragm pump, bellows pump, rotary pump and so on … … Address: No.518 Jinyuan Road(Jinyuan Industry Park), Shanghai, China Tel: 0086-21-39109967(direct), Fax: 0086-21-39109968 Website: www.sikopump.com e-mail: [email protected] As we are constantly endeavoring to improve the performance of our equipment, The company reserves the right to make alteration from time to time and equipment will maybe differ from that detailed in this brochure.