Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
PAGE DESCRIPTION
A1 SWING DOOR SPECIFICATION
A2 DOOR CONSTRUCTION DETAILS
A3 GENERAL ENTRANCE DOOR INFORMATION
A4 100 SERIES NARROW STILE DOOR
A5 350 SERIES WIDE STILE DOOR
A7 100T/B SERIES NARROW THERMALLY IMPROVED STILE DOOR
A8 350T/B SERIES WIDE THERMALLY IMPROVED STILE DOOR
A9 500T/B SERIES EXTRA WIDE THERMALLY IMPROVED STILE DOOR
A10 BUTT HINGE PREP INFORMATION
A11 OFFSET PIVOT & LOCK PREP INFORMATION
A12 STANDARD CLOSER & HANDLE PREP INFORMATION
A13 OPTIONAL DOOR RAIL INFORMATION
A14 OPTIONAL THERMALLY IMPROVED DOOR RAIL INFORMATION
A15 DOOR HARDWARE - LOCKING
A16 DOOR HARDWARE - EXIT DEVICES
A17 DOOR HARDWARE - CLOSERS
A18 DOOR HARDWARE - HINGING & THRESHOLDS
A19 DOOR HARDWARE - PUSH-PULLS
DOORS AND HARDWARESECTION A INDEX A
05
/1
9
A6 500 SERIES EXTRA WIDE STILE DOOR
SPECIFICATIONSWING DOOR A1
Part 1 - GENERALDescriptionWork included: Furnish materials, labour and equipment for the complete installation of aluminumentrance doors, door frames and hardware as detailed on the drawings and specified herein.Work not included: See Specifier list.Related work specified elsewhere: See Specifier list
Quality AssuranceDrawings and specifications for work in this section are based upon Desa series: 100, 350, 500, 100T/B,350T/B & 500T/B doors. Whenever alternative products are to be considered, submit supportingtechnical literature and samples for review and comparison by Consultant 10 days prior to closing date.
PerformanceDoors to fully comply with applicable standard specifications as typically referenced to the followingrequirement criteria: Air and water tightness, wind and other load resistance.
Maintenance and GuaranteeProvide maintenance and cleaning data in accordance with instructions under General Conditions.Provide a written guarantee from substantial completion for a period of one year on the completeinstallation of materials and workmanship provided under this section.
Part 2 - PRODUCTSMaterialsExtrusions shall be 6063 T6 alloy and temper, formed aluminum components shall be of suitable alloyand strength to suit their purpose and function.Fasteners shall be made of corrosion-resistant and compatible materials and of sufficient size andstrength to perform their intended function.Glazing gaskets shall be extruded black, santoprene of durometer appropriate to perform theirintended function.Weathering shall be elastomeric or wool pile and of size and density appropriate for their intendedfunction.
FabricationConstruct door from extrusions of size and shape as shown on shop drawings, rails and stiles shall beporthole type extrusions.Corner joinery shall be accurately assembled with mechanical clip fasteners and deep penetration plugand fillet welds.
FinishAll exposed surfaces shall be free of scratches and defects. Aluminum extrusions shall be finished asselected by Specifier.Standard Clear Anodizing: AA-M12C22A31 Duracron Acrylic Enamel: AAMA 2603Standard Bronze Anodizing: AA-M12C22A31 Duranar Fluoropolymer paint: AAMA 2605Standard Black Anodizing: AA-M12C22A44Various Bronze Anodizing colours and Paint qualities are available upon request by the Specifier.
HardwareHardware shall be the entrance manufacturer's standard unless stated otherwise by the Specifier. Ifalternative hardware is selected by consultant the required templates and physical hardware must besubmitted for assembly and fabrication.
InstallationDoors shall be installed, glazed and adjusted according to the manufacturer's instructions andapproved shop drawings. All items in this section shall be set level, square and plumb, and at theircorrect location and alignment with other work.
05
/1
9
100 SERIES DOOR IS ILLUSTRATED
ALL DESA DOORS ARE SIMILAR
DUAL MOMENT CORNER
CONSTRUCTION ACHIEVED BY
ATTACHING A 3/16" (5 mm)
EXTRUDED CHANNEL CLIP AT
ENDS OF DOOR STILES WITH
1/4"-20 BOLTS AND 3/16" NUT
PLATES.
BOTH TOP AND BOTTOM RAILS
ARE ACCURATELY POSITIONED
OVER THE CHANNEL CLIPS
PRIOR TO APPLYING BOTH THE
FILLET WELDS AT THE TOP
AND BOTTOM RAIL WEBS AND
THE DEEP PENETRATION PLUG
WELDS TOP AND BOTTOM
PROVIDING AN EXTRA HIGH
STRENGTH CORNER JOINT.
(FOUR WELDS PER CORNER)
DETAILSDOOR CONSTRUCTION A2
05
/1
9
EXTERIOR
OUTSWING INSWING
R.H.O. L.H.O. L.H.O. R.H.O. L.H.I. R.H.I. R.H.I. L.H.I.
INACTIVE ACTIVE ACTIVE INACTIVE
STANDARD DOOR SIZES
SINGLE DOOR - OPENING SIZES 36" x 84" (914 mm x 2134 mm)
DOUBLE DOOR - OPENING SIZES 72" x 84" (1829 mm x 2134 mm)
STANDARD GLASS SIZES
SINGLE GLAZING 5 mm GLASS
SEALED UNIT 3/4" (19) OVERALL
100 SERIES DOOR 31-5/8" x 77-1/8" (804 mm x 1959 mm)
350 SERIES DOOR 28-7/16" x 72" (723 mm x 1829 mm)
500 SERIES DOOR 25-7/16" x 68-13/16" (646 mm x 1748 mm)
THERMALLY IMPROVED DOOR GLASS SIZES
SEALED UNIT 7/8" (22) OVERALL
100T/B SERIES DOOR 31-5/8" x 76 3/16" (804 mm x 1927 mm)
350T/B SERIES DOOR 28-7/16" x 72-1/2" (723 mm x 1838 mm)
500T/B SERIES DOOR 25-7/16" x 68-13/16" (646 mm x 1748 mm)
AVAILABLE GLASS STOPS
SINGLE GLAZED DOOR SQUARE STOP
DOUBLE GLAZED DOOR SEALED UNIT STOP
DOOR INFORMATIONGENERAL ENTRANCE A3
05
/1
9
(45)
1 3/4"
(94)
3 11/16"
BOTTOM RAIL AND THRESHOLD
TOP RAIL
(50)
2"
MEETING STILES
(48)
1 7/8"
STILES (SINGLE ACTING)
UNIT GLASS STOPS
OPTIONAL SEALED
SINGLE GLAZING
(48)
1 7/8"
STANDARD SQUARE
GLASS STOPS FOR
- Our most popular and economical commercial door thatcombines strength and performance with the ability to acceptmost hardware applications.
- Standard door package includes D1 / D2 push-pull, maximumsecurity lock c/w cylinder and thumbturn, exposed closer, pivots,sweep and 4" (102 mm) threshold. Optional hardware is availableupon request.
- Available with various top, mid and bottom rails shown on pageA13.
- Single glazing stops are supplied as standard with sealed unitstops as optional.
- Standard finishes include clear, bronze and black anodized withoptional light bronze and painted finishes available.
- Compatible with all Desa storefront framing systems.
NARROW STILE DOOR100 SERIES A4
05
/1
9
WIDE STILE DOOR350 SERIES
- Our wide stile door provides the extra strength anddurability required for the high traffic usage found oninstitutional and retail applications.
- The addition of intermediate pivot or butt hinge isrecommended for high traffic conditions.
- Along with accommodating all our standard hardware, thisdoor with its wider stile will also accept a large selection ofinstitutional panic device products.
- Available with various top, mid and bottom rails shown onpage A13.
- Single glazing stops are supplied as standard with sealedunit stops as optional.
- Standard finishes include clear, bronze and black anodizedwith optional light bronze and painted finishes available.
- Compatible with all Desa storefront framing systems.
OPTIONAL SEALED
UNIT GLASS STOPS
BOTTOM RAIL AND THRESHOLD
7"
(178)
(94)
3 11/16"
GLASS STOPS FOR
SINGLE GLAZING
MEETING STILES
(89)
3 1/2"
STANDARD SQUARE
TOP RAIL
STILES (SINGLE ACTING)
(45)
1 3/4"
(89)
3 1/2"
A5
05
/1
9
EXTRA WIDE STILE DOOR500 SERIES
- Our extra wide stile door provides the extra strength anddurability required for the high traffic usage found on institutionaland retail installations.
- Along with accommodating all our standard hardware, this door,because of its stile width will also accept many of the institutionalpanic hardware products available.
- The addition of intermediate pivot or butt hinge is recommendedfor high traffic conditions.
- Available with various top, mid and bottom rails shown on pageA13.
- Single glazing stops are supplied as standard with sealed unitstops as optional.
- Standard finishes include clear, bronze and black anodized withoptional light bronze and painted finishes available.
- Compatible with all Desa storefront framing systems.
OPTIONAL SEALED
UNIT GLASS STOPS
BOTTOM RAIL AND THRESHOLD
MEETING STILES
STILES (SINGLE ACTING)
5"
5"
(127)
(127)
7"
(178)
A6
(178)
7"
SINGLE GLAZING
STANDARD SQUARE
GLASS STOPS FOR
05
/1
9
BOTTOM RAIL AND THRESHOLD
MEETING STILES(48)
1 7/8"
STILES (SINGLE ACTING)
(84)
(51)
2"
3 5/16"
(84)
3 5/16"
TOP RAIL
- The T/B series door has been specifically designed to provide an energyefficient exterior entrance for the Canadian climate.
- A continuous rigid PVC separator is mechanically secured to the interior sideof the door at all rails and stiles.
- A heavy wall aluminum cladding is interlocked to the PVC separator for aclean appearance and additional strength.
- For single acting entrance doors only (both offset pivot and butt hung).- Optional mid and bottom rails available and shown on page A14.- Compatible with most hardware applications and all Desa thermally
improved storefront systems.
THERMALLY IMPROVED DOOR100T/B SERIES NARROW STILE
ASTRAGAL OPTIONAL
A7
05
/1
9
- The T/B series door has been specifically designed to provide an energyefficient exterior entrance for the Canadian climate.
- A continuous rigid PVC separator is mechanically secured to the interior side ofthe door at all rails and stiles.
- A heavy wall aluminum cladding is interlocked to the PVC separator for a cleanappearance and additional strength.
- For single acting entrance doors only (both offset pivot and butt hung).- Optional mid and bottom rails available and shown on page A14.- Compatible with most hardware applications and all Desa thermally improved
storefront systems.
STILES (SINGLE ACTING)
MEETING STILES3 1/2"
2"
7"
3 5/16"
TOP RAIL
BOTTOM RAIL AND THRESHOLD
(89)
(51)
(178)
(84)
THERMALLY IMPROVED DOOR350T/B SERIES WIDE STILE A8
ASTRAGAL OPTIONAL
05
/1
9
THERMALLY IMPROVED DOOR500 T/B SERIES EXTRA WIDE STILE
BOTTOM RAIL AND THRESHOLD
MEETING STILES
STILES (SINGLE ACTING)
5"
5"
(127)
(127)
(178)
7"
- The T/B series door has been specifically designed toprovide an energy efficient exterior entrance for theCanadian climate.
- A continuous rigid PVC separator is mechanicallysecured to the interior side of the door at all rails andstiles.
- A heavy wall aluminum cladding is interlocked to thePVC separator for a clean appearance and additionalstrength.
- For single acting entrance doors only (both offset pivotand butt hung).
- Optional mid and bottom rails available and shown onpage A14.
- Compatible with most hardware applications and allDesa thermally improved storefront systems.
ASTRAGAL OPTIONAL
TOP RAIL
A9
(178)
7"
05
/1
9
7 1/2" 6 13/16"
4"
4 1/2"
3 7/8"
(3)
9/64"
4 1/2"
1 7/16"
C/L
C/L
C/L
EQUAL-
DESA STANDARD
34" (864)
DESA STANDARD
34" (864)
EQUAL-
DESA STANDARD
29 1/2" (749)
EQUAL-
DESA STANDARD
29 1/2" (749)
EQUAL-
(37)(40)
1 9/16"
(114)
(114)
4 1/2"
1/2" THRESHOLD
3/16
(3.5)
(3.5)
9/64"
(191)
(13)
(173)
(5)
(102)
(98)
(114)
1/8" CLEARANCE
CLEARANCE
FRAME DOOR
FRAME DOOR
PREP INFORMATIONBUTT HINGE
4 1/2"
(114)
A10
05
/1
9
CUT OUT (1/8" RECESS MOUNT)
BOTTOM FRAME PIVOT
TOP FRAME PIVOT
CUT OUT
(10)
(19)
(35)
(6)
(36)
(3)
(14)
(3)
(19)
(10)
(11)
(21)
(30)
(19)
(25)
C/L
(95)
(935)
CL
STANDARD M.S. LOCK CUTOUT
3/4"
1"
3 3/4"
9/16"
3/16"
1 13/32"
7/16"
1/8"
13/16"
1 3/16"
3/8"
3/4"
3/8"
1/4"
1 3/8"
3/4"
36 13/16"
PREP INFORMATIONOFFSET PIVOT AND LOCK
1 1/2"
3/4"
(19)
(6)
1/4"
(35)
1 3/8"
(45)
1 3/4"
(38)
3/8"
(10)
5/8"
BOTTOM FRAME PIVOT
CUT OUT (1/8" RECESS MOUNT)
1 3/4"
(45)
FOR 3100 NARROW TAB PIVOT FOR 2600 WIDE TAB PIVOT
A11
05
/1
9
(16)
VARIES
VARIES
(230)
(45)
(41)
(19)
(13)
DESA STANDARD MEASUREMENTS
FOR 5400 SERIES CLOSER.
9 1/16"
1 3/4"
1 5/8"
1/2"
3/4"
PREP INFORMATIONSTANDARD CLOSER AND HANDLE
11"
(279)
34 3/4"
(883)
44 3/4"
(1137)
12"
(305)
44 3/4"
(1137)
C/L C/L
C/L
STANDARD PUSH - PULL
PREP LOCATIONS
A12
OFFSET PULL LOCATION
VARIES WITH PANIC HARDWARE
FRAME
DOOR
05
/1
9
SQUARE
SINGLE
GLAZE
GLAZE
DOUBLE
OPTIONAL TOP & BOTTOM RAILS
STOP
ADAPTER
DOOR
OPTIONAL HORIZONTAL MID-RAILS
(310)
(210)
(183)
(124)
(111)
(54)
(98)
(19)
(50)
(94)
(178)
(305)
12 3/16"
8 1/4"
7 3/16"
4 7/8"
4 3/8"
2 1/8"
3 7/8"
3/4"
12"
7"
3 11/16"
2"
INFORMATIONOPTIONAL DOOR RAIL A13
3/16"
(5)
(254)
10"
05
/1
9
6 5/8"
3 1/2"
(89)
(168)
5"
8 1/8"
(127)
(206)
DOOR RAIL INFORMATIONOPTIONAL THERMALLY IMPROVED
HORIZONTAL
MID-RAIL
OPTIONS
OPTIONS
A14
(244)
9 5/8"
(283)
11 1/8"
3 9/16"
(90)
(103)
4 1/16"
(6)
1/4"
JOHNSON
TOP RAIL
FOR GLYNN
(254)
10"
(273)
10 3/4"
05
/1
9
BRONZE
ANODIZED
DC860
FLUSHBOLT
LS02
DC861
LS01
THUMBTURN
DUMMY CYLINDER
COMPLETE WITH MOHAIR
DOOR ASTRAGAL
STANDARD CYLINDER
RIM CYLINDER
WEATHERED STILE
STANDARD STRIKE
FOR LATCHLOCK
FLAT OR RADIUSED
WHEN REPLACING M.S. LOCK
REVERSIBLE STRIKE USED
FLAT OR RADIUSED
1850-20
LH-RH
4510
1850-50
PART
1850
PART
NO.
FACEPLATE
LATCHLOCK RADIUS
FACEPLATE
LATCHLOCK BEVELED
WITH WEATHERING
RADIUS FACEPLATE
BEVELED FACEPLATE
HEAVY DUTY LATCHLOCK
31/32 OR 1-1/8 BACKSET
31/32 OR 1-1/8 BACKSET
M.S. HOOK LOCK
4513-35 (LH 1 1/8") 4513-36 (RH 1 1/8")
MS 1853A-310 (1 1/8")
M.S. LOCK
DESCRIPTION
SHORT THROW
CLEAR
ANODIZED
FINISH
LOCKINGDOOR HARDWARE A15
FP13(LH)
FP14(RH)
FP15
FP33(LH)
FP34(RH)
FP35
555
MC701
2253
2254
W10
05
/1
9
MS 1853A-210 (31/32")
4513-25 (LH 31/32") 4513-26 (RH 31/32")
KEYED ALIKE / DIFFERENT
(PLAIN)
(SCHLEGEL)
BRONZE
ANODIZED
ESCUTCHEON PAD FOR
24VAC-12VDC INTERMITTENT DUTY
CURRENT TO DC OF SAME VOLTAGE
ADAMS RITE NARROW PROFILE
CONCEALED VERTICAL ROD PANIC
PADDLE HANDLE AND CAM PLUG
4590
P
U
S
H
LH-RH
4565
LH-RH
4560
+ A
C -
BR
82
DL
4603
7100
7400
8650
LEVER HANDLE AND CAM PLUG
THUMB LEVER AND CAM PLUG
FAIL SAFE / FAIL SECURE
SOLENOID
24VDC CONTINUOUS DUTY
CONVERTS LOW VOLTAGE AC
RECTIFIER (2 AMP)
ADAMS RITE ELECTRIC STRIKE
24V AC / 12V DC INTER. DUTY
ELECTRIC STRIKE 12V AC / 24V DC
FAIL SECURE
CONCEALED VERTICAL ROD PANIC
8800
8600
PART
NO.
8400
PART
FOR RIM PANIC
REMOVABLE MULLION
RIM PANIC
ADAMS RITE 8800 SERIES
ADAMS RITE 8600 SERIES
USE WITH 4900 LATCH LOCK
MORTISE PANIC FOR
ADAMS RITE 8400 SERIES
DESCRIPTION
CLEAR
ANODIZED
FINISH
3890
EXIT DEVICESDOOR HARDWARE A16
31-044-05
31-044-07
05
/1
9
BRONZE
ANODIZED
GRADE 1 SIZE ADJUSTABLE
4040-18J
4040-18
4040-18G
4040-3049
EDA
4040-3077
4040
4040 SERIES DROP PLATE
4040 SERIES DROP PLATE
FOR TRANSOM
4040 SERIES DROP PLATE
FOR PULL SIDE NARROW STILE
FOR NO TRANSOM
NON-HANDED
ARM SUPPLIED
WITH 4040CNS
WITH 4040HC
ARM SUPPLIED
DOOR CLOSER
C / W PARALLEL ARM BRACKET
DUTY APPLICATIONS
PARALLEL ARM FOR HEAVY
JAMB INSTALLATION
HANDED STANDARD OR TOP
ADJUSTABLE SHOE NON-
HOLD OPEN ARM WITH
5400-PB
5400-EXT
DP-TJN
DP-TJ
PART
NO.
5400
PART
FOR FRAME MOUNTING
PARALLEL ARM BRACKET
FOR 5400 CLOSER
ARM EXTENSION
FOR 5400 CLOSER
DROP PLATE FOR PARALLEL
ARM MOUNTING
DROP PLATE FOR PARALLEL
ARM MOUNTING
DROP PLATE FOR PARALLEL
ARM MOUNTING
DROP PLATE FOR PARALLEL
ARM MOUNTING
DROP PLATE FOR PARALLEL
ARM MOUNTINGARM MOUNTING
NARROW DROP PLATE
DROP PLATE FOR PARALLEL
CLOSER WITH
AJUSTABLE POWER RANGE
NON HANDED
DESCRIPTION
CLEAR
ANODIZED
FINISH
CLOSERSDOOR HARDWARE A17
4040CNS
4040HC
4040-18PA
FOR PARALLEL ARM
4040 SERIES DROP PLATE
05
/1
9
BRONZE
ANODIZED
CFM/DFM
SLI-HD1
CONTINUOUS GEARED
FULL - MORTISE
NARROW TAB OFFSET PIVOTS
J3100 - 1/8 RECESS
ALUMINUM HINGE
STAINLESS STEEL N.R.P. BUTT HINGE
2601
179-C32D
179-C2G
PART
PART
NO.
4-1/2" X 4" BALL BEARING
(J2500 - FLUSHMOUNT)
J2600 - 1/8 RECESS
WIDE TAB OFFSET PIVOTS
4-1/2" X 4" BALL BEARING
RADIUS CORNER
FRAME - 1/32 RECESSED
RADIUS CORNER
N.R.P. BUTT HINGE
BACKUP PLATE
DESCRIPTION
CLEAR
ANODIZED
FINISH
9511
9512 DOOR & FRAME - FLAT
HINGING AND THRESHOLDSDOOR HARDWARE
RH
LH
2602
LH
3102
3101
RH
A18
8" THRESHOLD
5" THERMALLY IMPROVED
4" THRESHOLD
5" THRESHOLD
6" THRESHOLD
7" THRESHOLD
DOOR SWEEP
THRESHOLD
PF5
DOOR BULLNOSE
POCKET FILLER
(BLACK PVC)
2108mm(83")
OR
2413mm(95")
2134mm
(84")
STRIP
05
/1
9
BRONZE
ANODIZED
CONCEALED OVERHEAD
30RD
5033-2
1180-2
PART
NO.
PART
CLOSER C/W SIDE LOAD ARM
AND BOTTOM CENTRE PIVOT
DESCRIPTION
CLEAR
ANODIZED
FINISH
PUSH - PULLSDOOR HARDWARE A19
PUSH BAR C/W PUSHPLATE
1" DIAMETER
12" OFFSET HANDLE
DESA STANDARD 3/4" X 3/4"
1" DIAMETER "D" PUSH BAR
PULL HANDLE
DESA STANDARD 11"
D2
D1
D1-PP
DESA STANDARD 11"
PUSH PLATE
D1-PB
DESA STANDARD 3/4" X 3/4"
PUSH BAR
WALKING BEAM PIVOT2480
8853
05
/1
9