5-Stage Tool

1.750” (44.5mm) Setting Tool .................................................................................................1

1.750” (44.5mm) Assembly & Disassembly Instructions ........................................................... 2-5

4-Stage Tools

2.500” (63.5mm) Setting Tool .................................................................................................6

3.125” (79.4mm) Setting Tool .................................................................................................7

3.375” (85.7mm) Heavy Setting Tool ........................................................................................8

2.500”, 3.125”, 3.375” (63.5mm, 79.4mm, 85.7mm) Assembly & Disassembly Instructions ... 9-12

A-1 HydraulicWireline Setting Tool

INDEXINDEX

MagnumOilTools.com@North America: (361) 299.6333 @International: +1 (361) 299.6333 (GMT / -6)5655 Bear Lane, Suite 100, Corpus Christi, TX USA 78405

The A-1 Hydraulic Setting Tool is utilized to set bridge plugs, composite plugs, packers, and cement retainers by converting applied hydraulic pressure into a pull force. The setting tool is deployed into the well by using coiled tubing, tubing, or drill pipe.

While running into the well, the tool automatically fills with well bore fluid and remains balanced. When the setting depth is reached, a ball bearing is released down the work string. A circulation rate can then be established to aid in pumping the ball bearing down into its mating seat inside the setting tool. When the ball bearing is fully seated, a pressure buildup will be noted. Slowly continue applying the required pressure to fully stroke the setting tool and set the downhole device. After the tool is fully stroked, circulation will be re-established.

Patent Pending

A-1 Hydraulic1.750” (44.5mm) Setting Tool

FEATURESFEATURES

INNOVATION REVEALEDINNOVATION REVEALED

OPERATIONSOPERATIONS

O.D. SIZEinch(mm)

STANDARD CONNECTION

inch(mm)

LENGTHinch(mm)

BALL SIZEinch(mm)

BALL SEATinch(mm)

STROKEinch(mm)

TEMP RATING

1.750(44.5)

1.0 (25.4)

CS HYDRIL

84(2,133.6)

0.375(9.5)

0.250(6.4)

8.0(203.2)

400ºF(204ºC)

a Automatically balances with wellbore fluid

a Hydraulically activated by applied pressure

a No ballistics required

a Redress Kits available

a Will couple to most adapter kits

a No wet string pull outs

a Coil tubing, tubing, or drill pipe conveyed

a Five stages are standard

a Can withstand high tensile loads

a No rotation required

a Shear Value: 200 PSI per shear screw with 5-stage tool

a Baker #5 or equivalent: Piston Area: 0.892 in2 (575.5mm2) /cylinder effective surface area 4.46 in2 (2,877.5mm2) with 5 stages Example: Applied PSI (MPa) @ surface X total x-sectional area

= shear value Lbs (Kgs) @ tool 2,800psi (19.3MPa) X 4.46 in2

= 12,488lbs (5,664.6Kg)

MagnumOilTools.com@North America: (361) 299.6333 @International: +1 (361) 299.6333 (GMT / -6)5655 Bear Lane, Suite 100, Corpus Christi, TX USA 78405 Page 1

The A-1 Hydraulic Setting Tool is utilized to set bridge plugs, composite plugs, packers, and cement retainers by converting applied hydraulic pressure into a pull force. The setting tool is deployed into the well by using coiled tubing, tubing, or drill pipe.

a Automatically balances with wellbore fluid

a Hydraulically activated by applied pressure

a No ballistics required

a Redress Kits available

a Four stages are standard

a No wet string pull outs

a Coiled tubing, tubing, or drill pipe conveyed

a Will couple to most adapter kits

a Can withstand high tensile loads

a No rotation required

a Shear Value: 175 PSI per shear screw with 4-stage tool

Patent Pending

A-1 Hydraulic 2.500” (63.5mm) Setting Tool

FEATURESFEATURES

INNOVATION REVEALEDINNOVATION REVEALED

OPERATIONSOPERATIONS

O.D. SIZEinch(mm)

STANDARD CONNECTION

inch(mm)

LENGTHinch(mm)

BALL SIZEinch(mm)

BALL SEATinch(mm)

STROKEinch(mm)

TEMP RATING

2.500 (63.5)

2.0625" (52.4)

IJ 10RD

83.75(2,127.3)

0.625(15.9)

0.438(11.1)

8.250(209.6)

400ºF(204ºC)

While running into the well, the tool automatically fills with well bore fluid and remains balanced. When setting depth is reached, a ball bearing is released down the work string. A circulation rate can then be established to aid in pumping the ball bearing down into its mating seat inside the setting tool. When the ball bearing is fully seated, a pressure buildup will be noted. Slowly continue applying the required pressure to set (shear off) the downhole device and fully stroke the setting tool. Once the device is set, and the setting tool has fully stroked, circulation will be re-established.

a Baker #5 or equivalent: Piston Area: 2.046 in2 (1,320.0mm2) /cylinder effective surface area 8.184 in2 (5,280.0mm2) with 4 stages Example: Applied PSI (MPa) @ surface X total x-sectional area

= shear value Lbs (Kgs) @ tool 4,000psi (27.6MPa) X 8.184 in2 (5,280.0mm2)

= 32,732lbs (14,847.2Kg)

a Baker #10 or equivalent: Piston Area: 2.046 in2 (1,320.0mm2) /cylinder effective surface area 8.184 in2 (5,280.0mm2) with 4 stages Example: Applied PSI (MPa) @ surface X total x-sectional area

= shear value Lbs (Kgs) @ tool 1,500psi (10.4MPa) X 8.184 in2 (5,280.0mm2)

= 12,275lbs (5,567.9Kg)

MagnumOilTools.com@North America: (361) 299.6333 @International: +1 (361) 299.6333 (GMT / -6)5655 Bear Lane, Suite 100, Corpus Christi, TX USA 78405 Page 6

The A-1 Hydraulic Setting Tool is utilized to set bridge plugs, composite plugs, packers, and cement retainers by converting applied hydraulic pressure into a pull force. The setting tool is deployed into the well by using coiled tubing, tubing, or drill pipe.

a Automatically balances with wellbore fluid

a Hydraulically activated by applied pressure

a No ballistics required

a Redress Kits available

a Four stages are standard

a No wet string pull outs

a Coiled tubing, tubing, or drill pipe conveyed

a Will couple to most adapter kits

a Can withstand high tensile loads

a No rotation required

a Shear Value: 175 PSI per shear screw with 4-stage tool

Patent Pending

A-1 Hydraulic 3.125” (79.4mm) Setting Tool

FEATURESFEATURES

INNOVATION REVEALEDINNOVATION REVEALED

OPERATIONSOPERATIONS

O.D. SIZEinch(mm)

STANDARD CONNECTION

inch(mm)

LENGTHinch(mm)

BALL SIZEinch(mm)

BALL SEATinch(mm)

STROKEinch(mm)

TEMP RATING

3.125 (79.4)

2-3/8” (60.3)

EU 8RD

84.25(2,134.0)

0.625(15.9)

0.500(12.7)

11(279.4)

400ºF(204ºC)

While running into the well, the tool automatically fills with well bore fluid and remains balanced. When setting depth is reached, a ball bearing is released down the work string. A circulation rate can then be established to aid in pumping the ball bearing down into its mating seat inside the setting tool. When the ball bearing is fully seated, a pressure buildup will be noted. Slowly continue applying the required pressure to set (shear off) the downhole device and fully stroke the setting tool. Once the device is set, and the setting tool has fully stroked, circulation will be re-established.

a Baker #10 or equivalent: Piston Area: 3.298 in2 (2,127.7mm2) /cylinder effective surface area 13.192 in2 (8,510.8mm2) with 4 stages Example: Applied PSI (MPa) @ surface X total x-sectional area

= shear value Lbs (Kgs) @ tool 2,500psi (17.3MPa) X 13.192 in2 (8,511.0mm2)

= 32,980lbs (14,959.7Kg)

a Baker #20 or equivalent: Piston Area: 3.298 in2 (2,127.7mm2) /cylinder effective surface area 13.192 in2 (8,510.8mm2) with 4 stages Example: Applied PSI (MPa) @ surface X total x-sectional area

= shear value Lbs (Kgs) @ tool 3,800psi (26.2MPa) X 13.192 in2 (8,511.0mm2)

= 50,130lbs (22,739Kg)

MagnumOilTools.com@North America: (361) 299.6333 @International: +1 (361) 299.6333 (GMT / -6)5655 Bear Lane, Suite 100, Corpus Christi, TX USA 78405 Page 7

The A-1 Heavy Hydraulic Setting Tool is utilized to set bridge plugs, composite plugs, packers, and cement retainers by converting applied hydraulic pressure into a pull force. The setting tool is deployed into the well by using coiled tubing, tubing, or drill pipe.

a Automatically balances with wellbore fluid

a Hydraulically activated by applied pressure

a No ballistics required

a Redress Kits available

a Four cylinders are standard

a No wet string pull outs

a Coil tubing, tubing, or drill pipe conveyed

a Will couple to most adapter kits

a Can withstand high tensile loads

a No rotation required

a Shear Value: 175 PSI per shear screw with 4-stage tool

Patent Pending

A-1 Hydraulic3.375” (85.7mm) Heavy Setting Tool

FEATURESFEATURES

INNOVATION REVEALEDINNOVATION REVEALED

OPERATIONSOPERATIONS

O.D. SIZEinch(mm)

STANDARD CONNECTION

inch(mm)

LENGTHinch(mm)

BALL SIZEinch(mm)

BALL SEATinch(mm)

STROKEinch(mm)

TEMP RATING

3.375 (85.7)

2-3/8” (60.3)

EU 8RD

84.25(2,134.0)

0.625(15.9)

0.500(12.7)

11(279.4)

400ºF(204ºC)

While running into the well, the tool automatically fills with well bore fluid and remains balanced. When setting depth is reached, a ball bearing is released down the work string. A circulation rate can then be established to aid in pumping the ball bearing down into its mating seat inside the setting tool. When the ball bearing is fully seated, a pressure buildup will be noted. Slowly continue applying the required pressure to set (shear off) the downhole device and fully stroke the setting tool. Once the device is set, and the setting tool has fully stroked, circulation will be re-established.

a Baker #10 or equivalent: Piston Area: 3.298 in2 (2,127.7mm2) /cylinder effective surface area 13.192 in2 (8,510.8mm2) with 4 stages Example: Applied PSI (MPa) @ surface X total x-sectional area

= shear value Lbs (Kgs) @ tool 2,500psi (17.3MPa) X 13.192 in2 (8,511.0mm2)

= 32,980lbs (14,959.7Kg)

a Baker #20 or equivalent: Piston Area: 3.298 in2 (2,127.7mm2) /cylinder effective surface area 13.192 in2 (8,510.8mm2) with 4 stages Example: Applied PSI (MPa) @ surface X total x-sectional area

= shear value Lbs (Kgs) @ tool 3,800psi (26.2MPa) X 13.192 in2 (8,511.0mm2)

= 50,130lbs (22,739Kg)

MagnumOilTools.com@North America: (361) 299.6333 @International: +1 (361) 299.6333 (GMT / -6)5655 Bear Lane, Suite 100, Corpus Christi, TX USA 78405 Page 8