13
A+ Review Quizzes Ch7 Question 1 Correct Mark 9.00 out of 9.00 Flag question Question text Match the Best Answer Holds its data as long as the RAM has power SRAM Loses its data rapidly DRAM Used on laptops SO-DIMM Used on subnotebook computers MicroDIMMs Currently the fastest memory and can support triple or dual channels or be installed as a single DIMM 240-pin DDR3 DIMM Has two notches on the module 168-pin SDRAM DIMM Must be installed two modules to a bank of memory 72-pin SIMM Must be installed four modules to a bank of memory 30-pin SIMM Have been used, returned to the factory, marked again, and then resold Re-marked chips Feedback The correct answer is: Holds its data as long as the RAM has power – SRAM, Loses its data rapidly – DRAM, Used on laptops – SO-DIMM, Used on subnotebook computers – MicroDIMMs, Currently the fastest memory and can support triple or dual channels or be installed as a single DIMM – 240-pin DDR3 DIMM, Has two notches on the module – 168-pin SDRAM DIMM, Must be installed two modules to a bank of memory – 72-pin SIMM, Must be installed four modules to a bank of memory – 30-pin SIMM, Have been used, returned to the factory, marked again, and then resold – Re-marked chips. Question 2 Correct Mark 1.00 out of 1.00

A+ Review Quizzes Ch7

Embed Size (px)

DESCRIPTION

CompTIA A+ Aplus Certification. Quizzes

Citation preview

A+ Review Quizzes Ch7

Question 1

Correct

Mark 9.00 out of 9.00

Flag question

Question text

Match the Best Answer

Holds its data as long as the RAM has power SRAM

Loses its data rapidly DRAM

Used on laptops SO-DIMM

Used on subnotebook computers MicroDIMMs

Currently the fastest memory and can support triple or dual channels or be installed as a single DIMM

240-pin DDR3 DIMM

Has two notches on the module 168-pin SDRAM DIMM

Must be installed two modules to a bank of memory 72-pin SIMM

Must be installed four modules to a bank of memory 30-pin SIMM

Have been used, returned to the factory, marked again, and then resold Re-marked chips Feedback

The correct answer is: Holds its data as long as the RAM has power – SRAM, Loses its data rapidly – DRAM, Used on laptops – SO-DIMM, Used on subnotebook computers – MicroDIMMs, Currently the fastest memory and can support triple or dual channels or be installed as a single DIMM – 240-pin DDR3 DIMM, Has two notches on the module – 168-pin SDRAM DIMM, Must be installed two modules to a bank of memory – 72-pin SIMM, Must be installed four modules to a bank of memory – 30-pin SIMM, Have been used, returned to the factory, marked again, and then resold – Re-marked chips.

Question 2

Correct

Mark 1.00 out of 1.00

Flag question

Question text

____ memory temporarily holds data and instructions as the CPU processes them.

Select one:

a. Random array

b. Read-only

c. Repeatable access

d. Random access

Feedback

The correct answer is: Random access.

Question 3

Correct

Mark 1.00 out of 1.00

Flag question

Question text

RAM is divided into two categories, ____.

Select one:

a. DIMM and SODIMM

b. DRAM and SRAM

c. RIMM and SRAM

d. SRAM and mSDRAM

Feedback

The correct answer is: DRAM and SRAM.

Question 4

Correct

Mark 1.00 out of 1.00

Flag question

Question text

____ is used for a memory cache and is contained within the processor housing.

Select one:

a. SRAM

b. DRAM

c. ROM

d. cSRAM

Feedback

The correct answer is: SRAM.

Question 5

Correct

Mark 1.00 out of 1.00

Flag question

Question text

____ loses its data rapidly, and the memory controller must refresh it several thousand times a second.

Select one:

a. Static RAM

b. Read-only memory

c. Dynamic RAM

d. Flash RAM

Feedback

The correct answer is: Dynamic RAM.

Question 6

Correct

Mark 1.00 out of 1.00

Flag question

Question text

RAM on motherboards today is stored on ____.

Select one:

a. chips

b. FPGAs

c. Socket Mem478

d. DIMMs

Feedback

The correct answer is: DIMMs.

Question 7

Correct

Mark 1.00 out of 1.00

Flag question

Question text

Laptops use a smaller version of a DIMM called a ____.

Select one:

a. mDIMM

b. SO-DIMM

c. dDIMM

d. l-DIMM

Feedback

The correct answer is: SO-DIMM.

Question 8

Correct

Mark 1.00 out of 1.00

Flag question

Question text

A ____ gets its name because it has independent pins on opposite sides of the module.

Select one:

a. DIMM

b. RIMM

c. SIMM

d. TRIMM

Feedback

The correct answer is: DIMM.

Question 9

Correct

Mark 1.00 out of 1.00

Flag question

Question text

DIMMs intended to be used in servers must be extremely reliable and use an error-checking technology called ____.

Select one:

a. CRC

b. ECC

c. AES

d. DPD

Feedback

The correct answer is: ECC.

Question 10

Correct

Mark 1.00 out of 1.00

Flag question

Question text

If the number of bits is not an odd number for odd parity or an even number for even parity, a ____ error occurs.

Select one:

a. checksum

b. flip

c. word

d. parity

Feedback

The correct answer is: parity.

Question 11

Correct

Mark 1.00 out of 1.00

Flag question

Question text

A Rambus memory module is called a ____.

Select one:

a. RIMM

b. DIMM

c. SIMM

d. RDIMM

Feedback

The correct answer is: RIMM.

Question 12

Correct

Mark 1.00 out of 1.00

Flag question

Question text

SIMMs are rated by speed, measured in ____.

Select one:

a. microseconds

b. milliseconds

c. picoseconds

d. nanoseconds

Feedback

The correct answer is: nanoseconds.

Question 13

Correct

Mark 1.00 out of 1.00

Flag question

Question text

When Windows does not have adequate memory to perform an operation, it gives a “____” error or it slows down to a painful crawl.

Select one:

a. Out of memory

b. Insufficient memory

c. Excess memory

d. Stack overflow

Feedback

The correct answer is: Insufficient memory.

Question 14

Correct

Mark 1.00 out of 1.00

Flag question

Question text

To upgrade memory means to add more ____ to a computer.

Select one:

a. ROM

b. Flash

c. RAM

d. disk

Feedback

The correct answer is: RAM.

Question 15

Correct

Mark 1.00 out of 1.00

Flag question

Question text

To use System Information, in the Vista Start Search box or the Windows XP Run box, type ____ and press Enter.

Select one:

a. msinfo32

b. msconfig

c. wininfo

d. msinfo

Feedback

The correct answer is: msinfo32.

Question 16

Correct

Mark 1.00 out of 1.00

Flag question

Question text

In the table found in the motherboard manual, a chip on a RIMM module is called a ____.

Select one:

a. tool

b. gadget

c. widget

d. component

Feedback

The correct answer is: component.

Question 17

Correct

Mark 1.00 out of 1.00

Flag question

Question text

Higher-quality memory modules have ____ installed to reduce heat and help the module last longer.

Select one:

a. fans

b. heat rails

c. epoxy

d. heat sinks

Feedback

The correct answer is: heat sinks.

Question 18

Correct

Mark 1.00 out of 1.00

Flag question

Question text

If the chip’s surface is dull or matted, or you can scratch off the markings with a fingernail or knife, suspect that the chip has been ____.

Select one:

a. re-burned

b. re-marked

c. defaced

d. installed new

Feedback

The correct answer is: re-marked.

Question 19

Correct

Mark 1.00 out of 1.00

Flag question

Question text

For ____ modules, small clips latch into place on each side of the slot to hold the module in the slot.

Select one:

a. DRAM

b. RIMM

c. DIMM

d. SIMM

Feedback

The correct answer is: DIMM.

Question 20

Correct

Mark 1.00 out of 1.00

Flag question

Question text

For RIMM modules, install the RIMMs beginning with bank ____.

Select one:

a. 0

b. 1

c. alpha

d. beta

Feedback

The correct answer is: 0.

Question 21

Correct

Mark 1.00 out of 1.00

Flag question

Question text

When installing the RIMM, ____ on the edge of the RIMM module will help you orient it correctly in the socket.

Select one:

a. vents

b. colors

c. notches

d. symbols

Feedback

The correct answer is: notches.

Question 22

Correct

Mark 1.00 out of 1.00

Flag question

Question text

In Windows, memory errors can cause frequent ____ errors.

Select one:

a. General Fault

b. General Protection Fault

c. Stack Underflow

d. Heap Underflow

Feedback

The correct answer is: General Protection Fault.

Question 23

Correct

Mark 1.00 out of 1.00

Flag question

Question text

A simple problem of replacing a bad memory module can become a complex research project if you don’t have a good grasp of current and past memory technologies.

Select one:

True

False

Feedback

The correct answer is 'True'.

Question 24

Correct

Mark 1.00 out of 1.00

Flag question

Question text

Systems using RIMMs are still being made

Select one:

True

False

Feedback

The correct answer is 'False'.

Question 25

Correct

Mark 1.00 out of 1.00

Flag question

Question text

Mixing unbuffered memory with buffered or registered memory will work but is not recommended.

Select one:

True

False

Feedback

The correct answer is 'False'.

Question 26

Incorrect

Mark 0.00 out of 1.00

Flag question

Question text

Most often, placing memory on the motherboard and updating the BIOS manually is all that is necessary for installation.

Select one:

True

False

Feedback

The correct answer is 'False'.

Question 27

Correct

Mark 1.00 out of 1.00

Flag question

Question text

For most SIMMs, the module slides into the slot at an angle.

Select one:

True

False

Feedback

The correct answer is 'True'.