Embed Size (px)
DESCRIPTION
sx
Citation preview
aet tankersalam dme 27 1405
Analyzed with SolidWorks Simulation Simulation of abhi 1
aet tankersalam dme 27 1405 abhilash sasidharan
29/7/2013
Simulation of abhiDate: Monday, 29 July, 2013Designer: abhilash sasidharanStudy name: Study 1Analysis type: Static
Table of ContentsDescription...............................................2
Assumptions.............................................3
Model Information.....................................3
Study Properties.......................................5
Units.........................................................5
Material Properties...................................6
Loads and Fixtures...................................7
Connector Definitions...............................8
Contact Information..................................8
Mesh Information......................................9
Sensor Details.........................................11
Resultant Forces.....................................11
Beams....................................................11
Study Results..........................................12
Conclusion..............................................14
DescriptionNo Data
Analyzed with SolidWorks Simulation Simulation of abhi 2
aet tankersalam dme 27 1405 abhilash sasidharan
29/7/2013
Assumptions
Analyzed with SolidWorks Simulation Simulation of abhi 3
aet tankersalam dme 27 1405 abhilash sasidharan
29/7/2013
Model Information
Study PropertiesStudy name Study 1
Analysis type Static
Mesh type Solid Mesh
Thermal Effect: On
Thermal option Include temperature loads
Zero strain temperature 298 Kelvin
Include fluid pressure effects from SolidWorks Flow Simulation
Off
Solver type FFEPlus
Inplane Effect: Off
Soft Spring: Off
Inertial Relief: Off
Incompatible bonding options Automatic
Large displacement Off
Compute free body forces On
Friction Off
Use Adaptive Method: Off
Result folder SolidWorks document (C:\Users\studentpclab01)
Analyzed with SolidWorks Simulation Simulation of abhi 4
aet tankersalam dme 27 1405 abhilash sasidharan
29/7/2013
UnitsUnit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2
Material PropertiesModel Reference Properties Components
Name: Alloy SteelModel type: Linear Elastic
IsotropicDefault failure
criterion:Unknown
Yield strength: 6.20422e+008 N/m^2
Tensile strength: 7.23826e+008 N/m^2
Elastic modulus: 2.1e+011 N/m^2Poisson's ratio: 0.28
Mass density: 7700 kg/m^3Shear modulus: 7.9e+010 N/m^2
Thermal expansion
coefficient:
1.3e-005 /Kelvin
SolidBody 1(Split Line2)(tutor1)
Curve Data:N/A
Analyzed with SolidWorks Simulation Simulation of abhi 5
aet tankersalam dme 27 1405 abhilash sasidharan
29/7/2013
Loads and FixturesFixture name
Fixture Image Fixture Details
Fixed-1
Entities: 1 edge(s), 1 face(s)Type: Fixed Geometry
Resultant ForcesComponents X Y Z Resultant
Reaction force(N) 0.638733 -0.437561 12627.9 12627.9Reaction Moment(N-
m)0 0 0 0
Analyzed with SolidWorks Simulation Simulation of abhi 6
aet tankersalam dme 27 1405 abhilash sasidharan
29/7/2013
Load name Load Image Load Details
Pressure-1
Entities: 1 face(s)Type: Normal to selected
faceValue: 6.89476e+006Units: N/m^2
Connector DefinitionsNo Data
Contact InformationNo Data
Analyzed with SolidWorks Simulation Simulation of abhi 7
aet tankersalam dme 27 1405 abhilash sasidharan
29/7/2013
Mesh InformationMesh type Solid Mesh
Mesher Used: Curvature based mesh
Jacobian points 4 Points
Maximum element size 6.82622 mm
Minimum element size 6.82622 mm
Mesh Quality High
Mesh Information - DetailsTotal Nodes 18044
Total Elements 10475
Maximum Aspect Ratio 10.784
% of elements with Aspect Ratio < 3 99.5
% of elements with Aspect Ratio > 10 0.0191
% of distorted elements(Jacobian) 0
Time to complete mesh(hh;mm;ss): 00:00:01
Computer name: CL27LAB
Analyzed with SolidWorks Simulation Simulation of abhi 8
aet tankersalam dme 27 1405 abhilash sasidharan
29/7/2013
Analyzed with SolidWorks Simulation Simulation of abhi 9
aet tankersalam dme 27 1405 abhilash sasidharan
29/7/2013
Sensor DetailsNo Data
Resultant Forces
Reaction ForcesSelection set
Units Sum XSum Y Sum Z Resultant
Entire Model N 0.638733 -0.437561 12627.9 12627.9
Reaction MomentsSelection set
Units Sum XSum Y Sum Z Resultant
Entire Model N-m 0 0 0 0
BeamsNo Data
Study Results
Name Type Min MaxStress1 VON: von Mises Stress 905483 N/m^2
Node: 77851.83289e+009 N/m^2Node: 3243
Analyzed with SolidWorks Simulation Simulation of abhi 10
aet tankersalam dme 27 1405 abhilash sasidharan
29/7/2013
Name Type Min Max
Analyzed with SolidWorks Simulation Simulation of abhi 11
aet tankersalam dme 27 1405 abhilash sasidharan
29/7/2013
Conclusion
Analyzed with SolidWorks Simulation Simulation of abhi 12
