01

ABOUT US

PRODUCTS

ETHYLENE

HDPE

LDPE

LLDPE

OTHER PRODUCTS

0302

Polymerc GmbH, as the commercial arm of a prominent holding company owning different olefin and polyolefin plants, is one of the leading producers of polyethylene products known for its wide range of high quality products and professional expertise.

As one of the largest production centers for polyethylene products in the Middle East today, we mainly produce a wide range of High Density, Low Density and Linear Low Density polyethylene (HDPE, LDPE, and LLDPE) for use in different applications. We produce more than 2 million tonnes of ethylene to be processed as feedstock in our seven brand-new plants.

Located in Germany’s capital, Berlin, Polymerc surrounded by the historical train manufacturing facilities called Borsigwerke, founded in 1837. Even today, one can see and feel an enterprising spirit in this fruitful setting. From this strategic point, we enjoy the best transport connections, given the proximity to Berlin’s Airport Tegel.

Our warehouses are located in Antwerp and Hamburg, where we have an excellent connection not only to different European countries but also the whole world. Thanks to our efficient logistic partners, we guarantee a quick delivery of the goods to our customers.

Our knowledge and competence originates from our long experience which you can trust. Quality, reliability, innovation and flexibility are our core values to have a successful and close cooperation with our partners and customers.

Wherever we operate, we aim for highest level of performance and benefit for all parties, leading to sustainable relationship and reliability. Also, our close cooperation with our customers lead to constant realization of their expectations. Orienting our activities to serve our customers’ needs, we work hand in hand with them and persistently deliver outstanding results.

On the following pages, you will find information about our range of products. If you have any further questions about the products or you need samples, please do not hesitate to contact us. We will always be at your service.

About Us

175KT/Y

The Group owns the whole up and midstream polyethylene

production chain. Our olefin plant came into production in 2012

with a total capacity of 2 million tonnes per year. The plant feeds

not only our own HDPE, LDPE, and LLDPE plants, but also our

domestic customers. In addition to ethylene, we have around

178K tonnes of C3+ every year and heavier products which are

processed into propylene and other petrochemical feedstock.

Below you can see a Production Process Diagram and an

overview of the plants.

EthaneC3+

Ethylene

Butene-1

300KT/Y

2000KT/Y

178KT/Y

300KT/Y

550KT/Y

300KT/Y

30KT/Y

300KT/Y

30KT/Y

Olefin Unit

HDPE Unit HDPE

LDPE Unit LDPE

MEG

LLDPE Unit

MEG

LLDPE

0504

Ethylene

PRODUCTS

High-density polyethylene (HDPE) is a thermoplastic material composed of

carbon and hydrogen joined together forming high molecular weight products

and is defined by a density range of 0.941-0.965 g/cm3. Industrially, HDPE

is synthesized from ethylene by a catalytic procedure. HDPE products are

characterized by high tensile strength, good chemical resistance, coupled

with higher service temperature limits. HDPE is also more durable and opaque

and can tolerate higher temperatures mainly compared to LDPE.

HDPE is basically used to produce high-performance pipe, chemical

drums, general household, kitchenware and industrial bottles, oil bottles,

injection-molded food containers, cable insulation, carrier bags, tanks for

storing chemicals, food wrapping material, etc.

Employing two individual plants, the groups produces a wide range of HDPE

products with diverse applications leading to improve the quality of life. With

total capacity of 300 KT/Y, our first HDPE plant came into production in 2012.

Polymerc’s second HDPE plant will start to produce various grades of HDPE

with total production capacity of 175 KT/Y in early 2018.

In line with the production of these two plants, our two swing HDPE/LLDPE

plants also possess the capacity to produce some other HDPE grades. In the

next pages, detailed information of our LLDPE plants will be provided.

Detailed properties of our HDPE products will be provided as follows. If there is

any product you cannot find in our catalogue, please do not hesitate to contact

us. We are fully at your disposal.

0706

HDPE

BG-HD 7260 (I3)

BG-HD 7255 (I4)

BG-HD 7255 (I4S)

BG-HD 4750 (BL2)

BG-HD 4760 (BL3)

BG-HD 4765 (BL3VD)

BG-HD 8355 (BL4M)

BG-HD 8255 (BL4)

BG-HD 7745 (BL8)

BG-HD 7740F (EX1)

BG-HD 7740F2 (EX1A)

BG-HD 7750M (EX2)

BG-HD 7750M2 (EX2S)

BG-HD 9455F (EX4)

BG-HD 9455F1 (EX4HS)

BG-HD 9450F (EX5)

BG-HD 9450F1 (EX5HS)

BG-HD 9445HT (EX6HT)

BG-HD 4750K (BL2A & EX7C)

BG-HD CRP100 black (EX3S)

BG-HD 5010T2 black (EX3B2)

BG-HD 5010T3 black (EX3B3)

BG-HD GX4035 (EX)

Product Code Group Density (gr/cm3) MFI(190°c/5 kg)

Main Application

0.956±0.002

0.954±0.002

0.954±0.002

0.944±0.002

0.954±0.002

0.959±0.002

0.951±0.002

0.952±0.002

0.944±0.002

0.944±0.002

0.944±0.002

0.956±0.002

0.956±0.002

0.956±0.002

0.957±0.002

0.949±0.002

0.950±0.002

0.944±0.002

0.946±0.002

0.954±0.002

0.954±0.002

0.954±0.002

0.959±0.002

23±3

11±2

11±2

1.1±0.3

1.2±0.3

1.5±0.3

0.35±0.05

0.4±0.05

0.31±0.04

1.8±0.3

1.8±0.3

2.5±0.3

3.3±0.3

0.28±0.05

0.22±0.05

0.28±0.05

0.22±0.05

0.18±0.03

3.5±0.05

0.22±0.02

0.45±0.06

0.43±0.03

1.1±0.03

Injection Molding

Injection Molding

Injection Molding

Blow Molding

Blow Molding

Blow Molding

Blow Molding

Blow Molding

Blow Molding

Raffia, Extrusion

Raffia, Extrusion

Monofilament, Extrusion

Monofilament, Extrusion

Extrusion, Film

Extrusion, Film

Extrusion, Film

Extrusion, Film

Extrusion, Film

Extrusion

Extrusion, Pipe

Extrusion, Pipe

Extrusion, Pipe

Extrusion, Pipe

Transport, stack and bottle crates, bottle lids

Thick-wall transport containers, refuse bins, fish crates

Thick-wall transport containers, refuse bins, fish crates

Disinfectant bottles (max. 2 L), cosmetics tubes, containers (max. 10 L), petrol cans (max. 5 L)

Containers (from a few ml to max 10 L), thermoforming sheets

Bottles and canisters (max. 10 L)

Bottles and canisters (max. 10 L)

Large bottles and canisters (max. 200 L)

Heating oil and storage tanks, transport containers

Stretch films and tapes

Tape for production of agricultural packaging

Monofilaments with high tensile strength

Monofilaments for fishing knots, geotextiles and civil engineering

Blown films with paper like quality, counter and carrier bags, wrapping films

Blown films with paper like quality, counter and carrier bags, wrapping films

Blown films with paper like quality, counter and carrier bags, wrapping films

Blown films with paper like quality, counter and carrier bags, wrapping films

Blown films with paper like quality, counter and carrier bags, wrapping films

Cable and wire insulation

PE 100 pressure pipes for gas and water transportation, PE 80 thinner-wall pressure pipes

Pressure, drinking water, gas, waste, and sewer pipes, pipe fittings and sheets

High quality PE 80 pressure pipes for gas and water transportation

Steel pipe coating

HDPE

08 09

BG-HD 50B01(N)

BG-HD 50B01(M)

BG-HD 42BF5

BG-HD 48BF7

BG-HD 62N07

BG-HD 62N18

BG-HD 54B04

BG-HD 52B11

BG-HD 52B18

BG-HD 40B04

BG-HD 50B03

BG-HD 52HF2

BG-HD 60NF7

BG-HD 48HF8

BG-HD 48HF3

BG-HD 51HF5

BG-HD 48HF6

BG-HD 44HF6

BG-HD 48HF3

BG-HD 48HF3

BG-HD 52HF3

BG-HD 52BF3

BG-HD 50HF4

Product Code Group Density (gr/cm3) MFI(190°C/2.16kg)

Main Application

0.950±0.002

0.950±0.002

0.942±0.002

0.948±0.002

0.962±0.002

0.962±0.002

0.954±0.002

0.952±0.002

0.952±0.002

0.940±0.002

0.950±0.002

0.952±0.002

0.960±0.002

0.948±0.002

0.960±0.002

0.951±0.002

0.948±0.002

0.944±0.002

0.948±0.002

0.948±0.002

0.952±0.002

0.952±0.002

0.950±0.002

1±0.2

1±0.2

0.5±0.1

0.7±0.2

7±1

18 ±3

4±0.5

11±2

18±3

4±0.5

3.3±0.2

0.2±0.02

0.7±0.1

0.8±0.2

0.3±0.1

0.5±0.1

0.6±0.1

0.6±0.15

0.3±0.15

0.3±0.15

0.35±0.1

0.35±0.1

0.45±0.15

Raffia, Textile & Monofilament

Raffia, Textile & Monofilament

Raffia, Textile & Monofilament

Raffia, Textile & Monofilament

Injection Molding

Injection Molding

Injection Molding

Injection Molding

Injection Molding

Rotomolding

Injection Molding

Blow Molding

Blow Molding

Wire & Cable

Wire & Cable

Pipe

Pipe

Pipe

Pipe

Film

Film

Film

Blow Molding

Narrow MWD high tenacity monofilament with dual stretch

Medium MWD monofilament tapes with easy processing

Tapes, blown film process

Tapes, cast or water wuench process

Crates and boxes

Fast cycle

Caps, closures, pallets, boxes, crates

Housewares containers,

Housewares with high fluidity

General purpose grade

Blown films, thin bags with high stretch

Containers (max. 2 L), general purpose grade

Small containers (max. 0.5 L) with high stiffness

Wire and cable

Jacketing

Sewage and non-pressure pipes

Telecommunication cable pipes, sewage pipes

PE 80 pressure pipes

PE 100 pressure pipes

Blown films, thin bags with high stretch

General purpose blown films with high stiffness

General purpose films

Medium blow moulding, jerry-cans

HDPE

1110

MFI (190°C/5 kg)

Low-Density Polyethylene possessing a density

range of 0.918-0.940 g/cm3 has the most excessive

branching. LDPE is synthesized from ethylene in high

pressure procedure. Compared to HDPE, LDPE is

more flexible and transparent and cannot tolerate high

temperature. LDPE products are easily processed by

most methods and have good strength and clarity.

The major application of Low Density Polyethylene is

general purpose film, extrusion coating, milk packaging,

squeeze bottles, toys, carrier bags, high frequency

insulation, chemical tank linings, heavy duty sacks,

injection molding, wire and cables, gas and water pipes

and others. Flexible packaging constitutes major part of

LDPE consumption.

We are proud of our brand-new LDPE plant, which

came into production with one of the modernist

technology in 2017. The plant produces a wide

range of low density polyethylene products with total

capacity of 300 KT per year including pipe coating,

PE foam, injection and blow molding, insulation, etc.

Our LDPE products are trusted by our customers

worldwide to produce competitive products from

liquid packaging, shrink films and bags to electrical

cables and wire insulations. In the following, you can

find more about our LDPE products.

LDPE

1312

Product Code Group Density (gr/cm3) MFI(190°C/2.16kg)

Main Application

BG-LD 1840F3

BG-LD 2420F3

BG-LD 2420F8

BG-LD 2426F8

BG-LD 3020F9

BG-LD 3026F9

BG-LD 2420E02

BG-LD 2426E02

BG-LD 3020E02

BG-LD 3026E02

BG-LD 2426E04

BG-LD 3020E04

BG-LD 3026E04

BG-LD 2420E36

BG-LD 2220F3

BG-LD 2220F8

BG-LD 2220E02

0.920±0.002

0.923±0.002

0.923±0.002

0.924±0.002

0.927±0.002

0.927±0.002

0.923±0.002

0.924±0.002

0.927±0.002

0.927±0.002

0.924±0.002

0.927±0.002

0.927±0.002

0.924±0.002

0.920±0.002

0.920±0.002

0.920±0.002

0.3±0.05

0.3±0.05

0.8±0.1

0.8±0.1

0.9±0.1

0.9±0.1

1.9±0.2

1.9±0.2

2±0.2

2±0.2

4±0.2

4±0.2

4±0.2

36±2

0.3±0.05

0.8±0.1

2±0.2

Film

Film, Co-extrusion

Film

Film

Film

Film

Film

Film

Film, Blow Molding

Film

Film

Film

Film

Injection Molding

Film

Wire & Cable, Extrusion

Film, Extrusion

Heavy duty packaging, shrink hoods, agricultural films

Heavy duty packaging, shrink hoods, Inliners

Shopper bags, sanitary films, surface protection films

Freezer and laminating films, shopping bag

Collation shrink, fine shrink and high calrity films

Lamination films, hygiene and food packaging FFS films

General purpose blown & cast films, fine shrink and high clarity films

General purpose blown & cast films, freezer flims,

hygiene and food packaging FFS films

Blown & cast lamination films, sanitary, high clarity and

surface protection films

Hygiene and food packaging FFS films, blown & cats, overwrap

and high clarity films

High clarity and clothes protection film

Lamninating, high clarity, cast and cling films

High clarity thin gauge films, cast films

General purposes, lids, closures, thin-wall containers

Heavy duty blown films, shrinkage and silage films

Medium voltage cable insulation

Hygienic films, foam, cast films

1514

LDPE

Linear Low-Density Polyethylene is well-defined by a density

range of 0.916-0.940 g/cm3 and has a significant number of

short branches. This gives LLDPE higher tensile strength and

higher impact and puncture resistance than the LDPE.

Linear Low Density Polyethylene is mainly used for plastic

bags and sheets (where it exhibits higher impact and puncture

resistance than LDPE), plastic wrap, stretch wrap, pouches,

toys, covers, lids, pipes, buckets and containers, cables

covering, and mainly flexible tubing.

Producing Linear Low Density Polyethylene, the two plants

came into operation in 2015 and 2016. Production capacity

of these LLDPE plants is totally 600 KT per year and the

products range from film and monofilament grade to injection

and rotomolding.

Employing two individual plants leads to flexibility in supplying

a wide range of LLDPE products at the same time. Detailed

properties of our LLDPE products will be provided as follows.

LLDPE

1716

Product Code Group Density (gr/cm3) MFI(190°C/2.16kg)

Main Application

BG-LL 18B01

BG-LL 18B02

BG-LL 18B03

BG-LL 18H01

BG-LL 18H02

BG-LL 18H03

BG-LL 22B01

BG-LL 22B02

BG-LL 22B03

BG-LL 22B05

BG-LL 25B25

BG-LL 25B60

BG-LL 23B07

BG-LL 23B16

BG-LL 22BF7

BG-LL 18B03

BG-LL 34B05

BG-LL 37B05

BG-LL 30B05

BG-LL 32H05

BG-LL 31BF4

BG-LL 33B03

0.918±0.002

0.918±0.003

0.918±0.002

0.918±0.002

0.918±0.002

0.918±0.002

0.922±0.002

0.922±0.002

0.922±0.002

0.922±0.001

0.925±0.002

0.925±0.002

0.923±0.001

0.923±0.001

0.922±0.002

0.918±0.002

0.934±0.002

0.937±0.001

0.930±0.002

0.932±0.001

0.931±0.002

0.933±0.001

1±0.2

2±0.2

3±0.2

1±0.15

2±0.2

3±0.2

1±0.2

2±0.2

3±0.2

5±0.5

25±3

60±3

7±1

16±2

0.7±0.1

3±0.2

5±1

5±1

5±1

5±1

0.4±0.1

3±0.2

Film

Film

Film

Film

Film

Film

Film

Film

Film

Injection Molding

Injection Molding

Injection Molding

Extrusion Coating

Extrusion Coating

Lamination, Blow Molding & Tubing

Wire & Cable

Rotomolding

Rotomolding

Rotomolding

Rotomolding

Miscellaneous

Miscellaneous

LLDPE

1918

General purpose blown film liners

Cast and blown films

Cast stretch films, wire and cable compounds

High stretch blown films

High stretch cast and blown films

High stretch films

High stiffness blown films, blending, lamination

High stiffness blown films, blending, lamination

High stiffness blown films, blending, lamination

Pails, containers

Lids, flexible closures

Fast cycle, thin-wall containers

General purpose grade, blending

Blending

Flexible irrigation pipes, small containers, blending

Blending component for wire and cable, cross-linked conduits

Standard general purpose grade

High stiffness applications

High stretch applications

Containers with high ESCR for chemicals storage

Geomembranes, coex films

Cast and diaper backing films

2120

As a global corporation active in natural gas-based products, we also produce

Butene-1, Methanol, and Ethylene Glycols, described as below. Among the other

prominent producers of ethylene products in the Middle East, we are the only one

that has secured feedstock for its plants.

Butene-1

Butene-1 is a colorless, combustible gas which is easily condensable under

pressure. It is a linear alpha-olefin with the formula C4H8 and used as a

co-monomer for production of polyethylene.

In almost all our plants, we produce and use Butene-1 with a capacity of 60 KT/Y.

Methanol

Methanol is a good solvent, but very toxic, extremely flammable, hygroscopic with

a wide range of applications in industry, such as formaldehyde production, MTBE,

acetic acid, fuels, solvents, etc. This simple single carbon alcohol is a volatile solvent

and a light fuel.

Our plant has a nominal capacity of 1650 KT/Y with Lurgi technology. It is still

under construction and will come in operation in 2019.

Ethylene Glycols

Monoethylene glycol (Ethylene glycol) is a colorless, virtually odorless and

slightly viscous liquid. It is soluble in with water, alcohols, aldehydes and many

organic compounds. Ethylene glycol is used as raw material in production of

PET, antifreeze in cooling and heating systems, softener in textiles, and also

manufacturing plasticizers and polyurethanes.

On a place of 7 hectares, the plant will come into production in 2019 and has a

total capacity of 550 KT annually. Beside MEG, we will have DEG and TEG in our

product group.

Other Products

Am Borsigturm 27,

13507 Berlin, Germany

Tel +49 30 4365 4760

www.polymerc.com