Abralon

Quality from start to finish

Quality from start to finish

RESEARCH & DEVELOPMENT RESEARCH & DEVELOPMENT CENTRECENTRE

RESEARCH & DEVELOPMENT RESEARCH & DEVELOPMENT CENTRECENTRE

For surface structuring of: paints, primers, top coats, clear coats, composites and plastics

Abralon® – When and How

Grain: Silicon carbideBonding: Special resinBacking: Knitted fabric

on foamCoating: Special Abralon®

method Colour: GreyGrit range: 180, 360, 500,600

1000, 2000, 4000

Abralon® – Technical Specification

Conventional abresive.Two dimensional closed structure.

AbralonTwo and three dimensional open structure

Non woven.Three dimensional openstructure

Abralon® – Leveling, Dirt Sensitivity

FLEXIBLE

• Edges, corners and contours are no longer a problem when sanding with Abralon

• The flexibility can be extended by using an interface pad.

Abralon®

SELFCLEANINGCompression of foam backing makes water and air circulateround the grit. Swarf is transported from surface into the foam.

Abralon®

Grit cuts deeper with conventionalstiff backing.

Grit bends back with Abralon andmakes an even scratch.

Abralon® – Cutting Property

Topcoat

Primer

Deep V-scratches extends curing time

U-scratches clear out solvents faster.

Abralon® – Scratch Shapes

Royal P320 Royal P320 + Abralon® 500

Abralon® – Scratch Shapes

Topcoat paint

Filler / Primer

Metal sheet

Mechanical bond between layers of paint

Abralon® – Scratch Form

Abralon 500Abralon 1000

Abralon 2000Abralon 4000

Abralon®

• Good structuring properties on: - primers, after leveling

- mattening of paint and clear before spraying - composites - dust enclosures - orange peels

•saves paint & gives deep luster •saves repainting & time

Abralon® – When and Why

• Fast polishing properties on:- oxidized paints

- removal of dirt- car wash marks- water spots- acid spots- gel coats- “korian”- cast marble- marble

* Large areas fast

Abralon® – When and Why