BARREL Mass Finishing Inc., Delano, Minn.

Mass Finishing Inc. is a leading manufacturer of high-energy centrifugal barrel finishing machines and vibratory tubs and bowls. Our engineers and technicians work with the total project in mind to assure total satisfaction for the customer. We offer a wide variety of models to choose from. We’ll work with you in developing your finishing pro- cess needs and choosing the right machine.

Circle 161 on reader information card

MASS FINISHING MEDIA

R&sler Metal Finishing USA LLC, Battle Creek, Mich.

Rosier has media and compounds for all mass fin- ishing applications, including ceramic and plastic media, in over 40 standard compositions and nearly 20 different shapes. This, along with almost unlim- ited sizes, makes Rbsler one of the most versatile media manufacturers in the world. A new state-of- the-art ceramic media production facility in Battle Creek means even quicker delivery time.

Circle 163 on reader information card

ABRASIVE BLAST SYSTEM Hunter Products Inc., Bridgewater, N. J.

Hunter Products Inc. is featuring the Micro-Jet 200, a miniature abrasive blast system. While low in cost, this new unit is a true pressure-feed system unlike other low-cost units, which are siphon-feed. Thus, its operational performance is fully the equal of far more expensive systems. In addition to its application for shockless cut- ting and machining of the hardest materials such as glass, ceramics, gemstones, carbides, etc. It is also used for etching and marking, deburr- ing, deflashing, cleaning, and surface finishing. The Micro-Jet 200 safely, conveniently, and effi- ciently removes conformal coatings from circuit boards without damage to boards or components. This technique provides for selective coating re- moval in tiny areas.

Circle 162 on reader information card

BARREL FINISHING MACHINE Richwood Industries Inc., Huntington Beach, Calif

Richwood Industries Inc. announces the latest addition to its Stainless Steel Centrifugal Barrel Finishing Machine line. It features six barrels, 48-in. wide with divided compartments with a maximum suggested speed of 150 rpm. At 110 rpm there is approximately 16 lb of force/in.” per barrel. As the rpm is increased, the centrifugal force increases exponentially. Also available is an automatic centrifugal barrel finishing ma- chine, which requires no manpower.

Circle 164 on reader information card

METAL FINISHING has a new address

650 Avenue of the Americas l New York, NY 10011 Phone: 212-633-3100 l Fax: 212-633-3140

www.metalfinishing.com

26 Metal Finishing