Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
1
Door Lift Mechanisms
Accent Collection
DOOR LIFT MECHANISMS
Technical Guide
Release date:
Oct 2018Please Note: The information shown in this literature is accurate as at the date of release shown but may be subject to changes after such date. Please therefore ensure that you are viewing the most current product available and check with us if you have any doubt about the suitability of the product or accuracy of the information shown.
Accent Collection
IMPORTANT PLEASE NOTE:The information contained in this literature is for illustrative purposes only to assist in choosing your desired kitchen. While we endeavour to keep the information up to date and correct we do not make any representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability and suitability of the doors and products that appear in this literature.
We aim to showcase as many different items as possible and therefore some products have been installed and photographed purely to show as many of our product features as possible and they should not be taken as an example of how they are intended to be installed in real kitchen installations.
It is therefore the responsibility of the installer to check the corresponding manufacturer’s installation information and the manufacturer’s technical information to ensure this is up to date and to ensure that the products can be fitted in a way they are displayed and the products are suitable for your requirements.
We specifically exclude any liability in this regard unless the products are fitted in accordance with the specifications we supply and the manufacturer’s installation recommendations are used in a way recommended by the manufacturer and in accordance with the manufacturer’s technical information provided.
The information shown in this literature is accurate as at the date of print/release shown on such information but it may be subject to changes after such date. Please therefore ensure that you are viewing the most current product information available and check with us if you have any doubt about the suitability of the product or accuracy of the information shown.
We are proud that all our products that we sell are covered by a statutory warranty but this does not stop all our products naturally ageing overtime. As a result of this natural ageing process we are therefore unable to provide an identical colour finish to the existing products you have purchased from us with any products that we supply you from the same product line. In such event our liability will be limited to the purchase price paid for the product you are seeking to replace.
Due to the limitations on photographic reproduction, colours may differ slightly from the actual products shown. Please note that board matches listed with the doors are a suggestion only and better board matches may be available on the market. It is up to the individual to decide on its suitability.
3
Door Lift Mechanisms
Accent Collection
CLASSIC GAS LIFTFor Bridging Units 60N / 80N / 100N
NOTE: Please do not use lubricating or any other oils as it can interrupt the reaction of the gas lift mechanism.
CODE DOOR SIZE WEIGHT CAPACITY
15GAS01 355mm (h) up to 596mm (w) Up to 6kg (60N)15GAS02 283mm (h) up to 996mm (w) Up to 8kg (80N)15GAS03 355mm (h) up to 996mm (w) Up to 10kg (100N)
Drawings aboveare for 15GAS01 / 15GAS03 only and not 15GAS02.
Classic gas lift - product overview
4
Door Lift Mechanisms
Accent Collection
CODE DOOR SIZE CABINET SIZE WEIGHT CAPACITY
95HUWIL001 2 x 355mm (h), up to 596mm (w) 720mm (h), up to 600mm (w) 6.1 - 10.8kg95HUWIL002 2 x 355mm (h), up to 996mm (w) 720mm (h), up to 1000mm (w) 8.5 - 14.4kg
EASIBi-fold Door Lift System
Easi bi-fold - product overview
One set consists of:• 1x Pair Free Fold piston arms, nickel-plated steel with grey coloured plastic cover caps• 2 x Brackets, for mounting piston arms, from frame width 45 mm, screw fixing, grey plastic• 2/3 x Finger safe connecting hinges, for frame width 20 mm, with adjustment,
screw fixing, nickel-plated zinc alloy• Installation instruction
Features:• Complete fitting set• Time saving installation provided by plugs, pre-mounted euro screws and clip fixing for front panel• For use in furniture in kitchens, living rooms, bathrooms and offices• For two-piece wooden flaps, flap locks in any position (multi-position stop function)• Assisted opening and soft closing• Adjustable fitting• Finger safe• Min. 110º opening concealed hinges are required • Weight capacity, total weight of 2 x doors and handle: 6.1-10.8kg (95HUWIL001) / 8.5-14.4kg (95HUWIL002)
DRAWER SYSTEMS, STAYS AND HINGES DIRECTORY / OCTOBER 2015
DR
AW
ER
SY
ST
EM
S,
STA
YS
AN
D H
ING
ES
20
15
, ©
Häfe
le U
.K.
Ltd
20
15
. D
imensio
nal d
ata
no
t b
ind
ing
. W
e r
eserv
e t
he r
ight
to a
lter
sp
ecific
atio
ns w
itho
ut
no
tice.
244 / FOR OUR FULL PRODUCT RANGE VISIT HAFELE.CO.UK
Adjustment facility
Height
adjustment
±3 mm
Holding power
adjustment Centre pull
adjustment
+ -
AA A
Finger protection
To avoid injuries the hinge comes
apart when fingers get trapped
unintentionally in the gap of the flap
> Complete fitting set
> Time saving installation provided by
plugs, pre-mounted euro screws and
clip fxing for front panel
> For use in furniture in kitchens, living
rooms, bathrooms and offices
> For two-piece wooden flaps, flap
locks in any position (multi-position
stop function)
> Assisted opening and soft closing
> For flap heights 720 (700-780) mm or
550 (540-580) mm
> Adjustable fitting, suitable for flap
weights 2-20.3 kg
> Finger safe
> Min. 110º opening concealed hinges
are required - order Quick Fixing 125º
hinge and mounting plate separately
FREE FOLD BI-FOLD LIFT UP FITTINGComplete fitting sets, or components available separately.
Side
adjustment
± 3 mm
Opening angle
adjustment
NEW
Free Fold lift up flap fitting set
> Set consists of:
1x Pair Free Fold piston arms, nickel-plated steel with grey or white coloured plastic cover caps
2x Brackets, for mounting piston arms, from frame width 45 mm, screw fixing, grey plastic
2/3x Finger safe connecting hinges, for frame width 20 mm, with adjustment, screw fixing, nickel-plated zinc alloy
> Installation instructions
> Order qty: 1 set
Generally used on door width For flap weight No. of connecting hinges included Grey White
For 550 mm cabinet height
600/800 mm 7.8 - 15.2 kg 2 pcs 372.38.000 372.38.001
For 720 mm cabinet height
600 mm 6.1 - 10.8 kg 2 pcs 372.38.002 372.38.003
800/1000 mm 8.5 - 14.4 kg 3 pcs 372.38.004 372.38.005
NEW
Order Quick Fixing 125º hinge
and mounting plate separately
shown on page 375
FIXINGSREQUIRED
5
YEARS
25
PAGE AMENDED
10.01.18/2
DRAWER SYSTEMS, STAYS AND HINGES DIRECTORY / OCTOBER 2015
DR
AW
ER
SY
ST
EM
S,
STA
YS
AN
D H
ING
ES
20
15
, ©
Häfe
le U
.K.
Ltd
20
15
. D
imensio
nal d
ata
no
t b
ind
ing
. W
e r
eserv
e t
he r
ight
to a
lter
sp
ecific
atio
ns w
itho
ut
no
tice.
244 / FOR OUR FULL PRODUCT RANGE VISIT HAFELE.CO.UK
Adjustment facility
Height
adjustment
±3 mm
Holding power
adjustment Centre pull
adjustment
+ -
AA A
Finger protection
To avoid injuries the hinge comes
apart when fingers get trapped
unintentionally in the gap of the flap
> Complete fitting set
> Time saving installation provided by
plugs, pre-mounted euro screws and
clip fxing for front panel
> For use in furniture in kitchens, living
rooms, bathrooms and offices
> For two-piece wooden flaps, flap
locks in any position (multi-position
stop function)
> Assisted opening and soft closing
> For flap heights 720 (700-780) mm or
550 (540-580) mm
> Adjustable fitting, suitable for flap
weights 2-20.3 kg
> Finger safe
> Min. 110º opening concealed hinges
are required - order Quick Fixing 125º
hinge and mounting plate separately
FREE FOLD BI-FOLD LIFT UP FITTINGComplete fitting sets, or components available separately.
Side
adjustment
± 3 mm
Opening angle
adjustment
NEW
Free Fold lift up flap fitting set
> Set consists of:
1x Pair Free Fold piston arms, nickel-plated steel with grey or white coloured plastic cover caps
2x Brackets, for mounting piston arms, from frame width 45 mm, screw fixing, grey plastic
2/3x Finger safe connecting hinges, for frame width 20 mm, with adjustment, screw fixing, nickel-plated zinc alloy
> Installation instructions
> Order qty: 1 set
Generally used on door width For flap weight No. of connecting hinges included Grey White
For 550 mm cabinet height
600/800 mm 7.8 - 15.2 kg 2 pcs 372.38.000 372.38.001
For 720 mm cabinet height
600 mm 6.1 - 10.8 kg 2 pcs 372.38.002 372.38.003
800/1000 mm 8.5 - 14.4 kg 3 pcs 372.38.004 372.38.005
NEW
Order Quick Fixing 125º hinge
and mounting plate separately
shown on page 375
FIXINGSREQUIRED
5
YEARS
25
PAGE AMENDED
10.01.18/2
5
Door Lift Mechanisms
Accent Collection
HD
E 09
/201
5
1
2.00
01.0
10.4
44.0
000.
0073
2.23
.035
1/121/12
„mm“
372.37.060
Y
1916
32
32
64
57
64
64
32 R12
Ø5
Euro
+Y
Y
1916
32
32
64
57
64
64
32
L12
Ø5
Euro
HDE 05/2014
12.0001.012.005.0000.00
732.23.021
+Y
J
110° max < 90 °(~ 77° - 84°)
A
C
D
B
372.37.044
G
4 x 8
H2x
E 2x
372.64.796
372.64.797
(Euro)ø6,3
ø4,2
20
I8x
F
Free fold short 372.38.XXX
#W7Qwww.hafele.com:
ins-src-Free fold short.fm Seite 1 Donnerstag, 1. Oktober 2015 4:00 16
Easi - fitting instructions
6
Door Lift Mechanisms
Accent Collection3/12
530.32.23700.0000.444.010.1000.21
5102/90 E
DH
„mm“
[ ° ]ß RQ S T U V W
~108-95 439 136-46 161-233 439-500250-2191,2 736720
32
A1K X
KH720
25.5
17
32A1
X
12
Ø5
W
V
U
T
≥ 270
ß
25
Y
Y
57
57
5
64
121
64
185
32
217
44
261
64+ 32
Y+ 64
ins-src-Free fold short.fm Seite 3 Donnerstag, 1. Oktober 2015 4:00 16
Y = 128
X = 133
X = = 133 KH − Y − S − (2 x K) + A1
Y = ( = 128 Q x KH) − R − K internal
Bottom of door, 32 from edge
Easi - fitting instructions
7
Door Lift Mechanisms
Accent Collection
HD
E 09
/201
5
1
2.00
01.0
10.4
44.0
000.
0073
2.23
.035
4/12
„mm“1
2 PZ 2
B
A
2
1
L
R R323232
35
40
32
64
64
64
1612
Ø5
Euro
Spax J
5 mm
12
Ø5
Y
Y
57
57
5
64
121
64
185
32
217
44
261
64+ 32
Y+ 64
≥270
ins-src-Free fold short.fm Seite 4 Donnerstag, 1. Oktober 2015 4:00 16Easi - fitting instructions
8
Door Lift Mechanisms
Accent Collection
Easi - fitting instructions
5/12
HD
E 09
/201
5
1
2.00
01.0
10.4
44.0
000.
0073
2.23
.035
„mm“3
6464 3232
2(1-4)
2(1-4)
32 32
17 17
1414
1414
A1
A2 A2
A1K KX X
2(1-4)
14
14
14
14
64 6432 32
3232
20
A2A2
A1A1 K K
B = A2 - 5,5B = 7,0B = 13,5
min
max
XX
≥900
A1 KX
A1 K
X 6,5Ø9
Ø7,890°
B
≥900
F
X = KH − Y − S − (2 x K) + A1
ins-src-Free fold short.fm Seite 5 Donnerstag, 1. Oktober 2015 4:00 16
9
Door Lift Mechanisms
Accent Collection
Easi - fitting instructions
HD
E 09
/201
5
1
2.00
01.0
10.4
44.0
000.
0073
2.23
.035
6/12
4
5
F
F
G G
ins-src-Free fold short.fm Seite 6 Donnerstag, 1. Oktober 2015 4:00 16
10
Door Lift Mechanisms
Accent Collection
Easi - fitting instructions
7/12
HD
E 09
/201
5
1
2.00
01.0
10.4
44.0
000.
0073
2.23
.035
6
7
E E
H
I
1
2
ins-src-Free fold short.fm Seite 7 Donnerstag, 1. Oktober 2015 4:00 16
11
Door Lift Mechanisms
Accent Collection
Easi - fitting instructions
HD
E 09
/201
5
1
2.00
01.0
10.4
44.0
000.
0073
2.23
.035
8/12
8
F
1
2
ins-src-Free fold short.fm Seite 8 Donnerstag, 1. Oktober 2015 4:00 16
12
Door Lift Mechanisms
Accent Collection
Easi - fitting instructions
9/12
HD
E 09
/201
5
1
2.00
01.0
10.4
44.0
000.
0073
2.23
.035
„mm“
1
2
2
1,5
ins-src-Free fold short.fm Seite 9 Donnerstag, 1. Oktober 2015 4:00 16
13
Door Lift Mechanisms
Accent Collection
Easi - fitting instructions
HD
E 09
/201
5
1
2.00
01.0
10.4
44.0
000.
0073
2.23
.035
10/12
„mm“
9
=!
= Kg
NmNm
2
1
1
PZ 2
PZ 2
ins-src-Free fold short.fm Seite 10 Donnerstag, 1. Oktober 2015 4:00 16
14
Door Lift Mechanisms
Accent Collection
Easi - fitting instructions
11/12
HD
E 09
/201
5
1
2.00
01.0
10.4
44.0
000.
0073
2.23
.035
10
C
34
21
ins-src-Free fold short.fm Seite 11 Donnerstag, 1. Oktober 2015 4:00 16
15
Door Lift Mechanisms
Accent Collection
Easi - fitting instructions
12/12
HD
E 09
/201
5
1
2.00
01.0
10.4
44.0
000.
0073
2.23
.035
© 2014 by Häfele GmbH & Co KGAdolf-Häfele-Str. 1 · D-72202 Nagold · www.hafele.com
Subject to alterations
3
2
1
ins-src-Free fold short.fm Seite 12 Donnerstag, 1. Oktober 2015 4:00 16