Accessories - Neville Lumb · Heatguard® BF2-2 Sports Specifically designed to give high flow rates on low pressure systems • Ideal as a small group mixing valve and for fitting

Telephone Orders: +44 (0)1386 712400 Fax: +44 (0)1386 712401 Email Orders: [email protected] Web: www.rwc.co.uk

List Price exc. VAT

26

SHARKBITE®

Thermal Balancing ValvesNon-thermal Balancing ValvesCompact Thermostatic Mixing ValvesTelescopic Thermostatic Mixing ValveThermostatic Mixing ValvesGroup Mixing ValvesTempering ValvesSolar ValvesThermostatic Mixing Valve Accessories

Disconnect Tongs

PEX Pipe Bend Formers

Pipe Scribing ToolFor use with chrome plated copper pipe.

Silicone Lubricant Grease (Non-Toxic)

Product MOQ/ Pk Size

Size Code Price per fitting(£)

PEX pipe bend former 1 15mm SBPXFB15 3.65PEX pipe bend former 1 22mm SBPXFB22 6.50



Pipe Scribing Tool 1 15mm SB3415 5.00



Silicone lubricant grease 1 100g SBSG 16.10



Disconnect tongs 1 10mm SB3010 5.20Disconnect tongs 1 15mm SB3015 5.20Disconnect tongs 1 22mm SB3022 5.20Disconnect tongs 1 28mm SB3028 5.70

Accessories

28 29

TEMPERATURE CONTROL

TEMPERATURE CONTROL



List Price exc. VAT List Price exc. VAT

Balancing ValvesHarron Valves & Thermal Balancing Valves

Thermal Balancing ValvesEasy temperature adjustment between 40-65°C and tamper-proof cap • Built-in disinfection function to protect against Legionella • Dry-fit thermometer – no need to drain • Pre-insulated saving time and cost

Harron Valves (Combined Thermal Balancing Valve (TBV) /Pressure Reducing Valve (PRV))Single unit cartridge design ensures a quick and easy installation • Reduced leakage potential and easy maintenance, saving cost • Supplied pre-insulated further reducing time and cost • Easy temperature adjustment between 40-65°C and tamper-proof cap • Built-in disinfection function to protect against legionella • Dry-fit thermometer – no need to drain • High flow rate design • ‘Lift and Turn’mechanism for ease of pressure adjustment • One-piece Easiset cartridge • Fully serviceable strainer • Reduces design complexity and avoids installation errors

Also available with SharkBite® push-fit connectors for even quicker installationSee page 23.

Also available with SharkBite® push-fit connectors for even quicker installationSee page 23.

Multi Application TeeTee enables easy temperature reading, sampling or draining on domestic potable water systems • A thermometer or temperature sensor can easily be inserted into the temperature pocket for instant reading • The Multi Application Tee design allows the pocket to be left empty with the possibility of leakage • The BSP connections allow a drain tap or sampling valve to be permanently attached to permit easier regular draw off samples or easy drainage • Stagnant free internals • High quality bronze body • Nominal Pressure PN16

Manual Double Regulating Valve Valve combines a double regulating control valve with a temperature pocket and thermometer in one for ease of installation and use • Includes isolation and drain point for maintenance work • Self-lubricating EPDM lip seals can be replaced under pressure • Stagnation free internals • High quality bronze body • Nominal Pressure PN16

Product Size Code Price per unit(£)

Duo combi PRV/TBV ½" TREG200001 165.00

Duo combi PRV/TBV ¾" TREG200002 180.00

Spare temperature gauge N/A GAGE100060 10.40Service kit for TBV N/A SKIT100060 26.00Spare insulation case ½" INSU200001 12.00Spare insulation case ¾" INSU200002 12.50Spare One Piece Cartridge ¾" REDC320002 40.05Spare gauge ¼" GAGE250017 10.70


Manual Double Regulating Valve ½" MREG100000 131.10Manual Double Regulating Valve ¾" MREG100005 140.10Manual Double Regulating Valve ½" MREG100010 131.10Manual Double Regulating Valve ¾" MREG100015 140.10


Thermal balancing valve ½" FBSP TREG100060 114.40 Thermal balancing valve ¾" FBSP TREG100065 122.70 Spare temperature gauge N/A GAGE100060 10.40Service kit N/A SKIT100060 26.00Spare insulation case ½" INSU100060 8.30Spare insulation case ¾" INSU100065 8.55


Multi Application Tee DN15 Male MREG200000 106.60Multi Application Tee DN20 Male MREG200005 120.35Multi Application Tee DN15 Coupling MREG200010 111.35Multi Application Tee DN20 Coupling MREG200015 126.40

30 31

TEMPERATURE CONTROL

TEMPERATURE CONTROL




Thermostatic Mixing ValvesThermostatic Mixing Valves

Heatguard® DualRapid failsafe on either hot or cold supply failure • Provides stable mixed watertemperature • Tamperproof cap • Part G and D08 compliant • Flat faced unionconnections for ease of maintenance • Available in 15mm, 22mm and Universal connections, with or without isolating valves • Scale resistant internal components ensure a long, trouble-free working life • Brass adaptor available which allows for easy installation of a cold water feed direct from the 4 in 1 isolating elbow

Ausimix® Compact TelescopicDesigned with retro-fit applications in mind, the telescopic union connectors provide greater installation flexibility • Telescopic connectors are adjustable by 10mm on either inlet • Rapid failsafe on either hot or cold supply failure • Provides stable mixed water temperature• Unique temperature adjustment tool incorporated into the cap • Part G and D08 compliant • Flat faced union connections for ease of maintenance • Inlets house check valve and strainer • Bodies are nickel plated DZR brass

Ausimix® Compact Rapid failsafe on either hot or cold supply failure • Provides stable mixed watertemperature • Unique temperature adjustment tool incorporated into the cap •Part G and D08 compliant • Flat faced union connections for ease of maintenance • Bodies are nickel plated DZR brass • Brass adaptor available which allows for easy installation of a cold water feed direct from the 4 in 1 isolating elbow

Product L/min. Size Code Price(£)Ausimix® Compact - 2 in1 35 at 2.5bar 15mm HEAT110750 57.60Ausimix® Compact - 2 in1 35 at 2.5bar 22mm HEAT110755 68.45Ausimix® Compact - 4 in1 35 at 2.5bar 15mm HEAT110780 78.00Ausimix® Compact - 4 in1 35 at 2.5bar 22mm HEAT110785 88.80Ausimix® full internal service kit N/A N/A SKIT110700 50.85Ausimix® seal service kit N/A N/A SKIT110605 16.10Ausimix® 2 in1 service kit N/A 15mm SKIT110610 20.00Ausimix® 2 in1 service kit N/A 22mm SKIT110710 21.90Ausimix® 4 in1 service kit N/A 15mm SKIT110715 21.00Ausimix® 4 in1 service kit N/A 22mm SKIT110720 22.90Ausimix® replacement cap N/A N/A ZCAP110700 4.70Ausimix® ¾" fibre washer N/A ¾" ZWAS110705 2.80Ausimix® 1" fibre washer N/A 1" ZWAS110700 3.75Potable water brass adaptor N/A ¼" MBSP x 15mm ZADP110780 4.85

Product L/min. Size Code Price(£)Ausimix® Compact Telescopic - 2 in1 35 at 2.5bar 15mm HEAT110751 65.00

Product L/min. Size Code Price(£)Heatguard® Dual - 2 in1 35 at 2.5bar 15mm HEAT110614 64.05Heatguard® Dual - 2 in1 35 at 2.5bar 22mm HEAT110624 74.85Heatguard® Dual - 2 in1 Universal 35 at 2.5bar 15/22mm HEAT110615 90.45Heatguard® Dual - 4 in1 35 at 2.5bar 15mm HEAT110616 99.50Heatguard® Dual - 4 in1 35 at 2.5bar 22mm HEAT110625 117.45Heatguard® Dual - 4 in1 Universal 35 at 2.5bar 15/22mm HEAT110617 123.70Potable water brass adaptor N/A ¼" MBSP x 15mm ZADP110780 4.85

Say g'day to...

Ausimix TMVs provide high performance accurate temperature control and rapid failsafe on either hot or cold water supply failure for both domestic and commercial applications.

Ausimix valves are available with either 2-in-1 or 4-in-1 fittings and have a unique temperature adjustment tool incorporated into the cap as well as flat faced union connections for ease of maintenance.

Thermostatic Mixing Valves

Also available with SharkBite® push-fit connectors for even quicker installationSee page 21-22.

32 33

TEMPERATURE CONTROL

TEMPERATURE CONTROL




Thermostatic Mixing Valves &Small Group Mixing ValvesThermostatic Mixing Valves

ProMix® 22-2Specifically designed for rapid bath fill and small group mixing applications • Single piece cartridge allows easy maintenance and replacement • Ensures rapid and positive shut-off of mixed flow on cold or hot supply failure • High flow design suitable for rapid bath fill at low pressure • Designed to handle dynamic pressure imbalances of up to 10:1 • Optional wall mounting bracket • TMV3 approved for bath fill applications • Suitable for use with up to 6 showers

Heatguard® BF2-2 SportsSpecifically designed to give high flow rates on low pressure systems • Ideal as a small group mixing valve and for fitting to baths in low pressure systems to comply with Part G regulations • TMV2 approved by Buildcert for peace of mind • Technically advanced construction means longer life and reduced maintenance intervals • Suitable for use with up to 8 showers • Brass adaptor available which allows for easy installation of a cold water feed direct from the 4 in 1 isolating elbow

COLD

HOT

MIX Heatguard® LS2L pattern valve is simple to install and service • Rapid failsafe on either hot or cold supply failure • Provides stable mixed water temperature • Tamperproof setting adjustment • Integral strainers protect against dirty systems • Check valves protect against cross-flow • Hot and cold inlet connections are at a right angle to each other, ideal for under basin applications

Heatguard® Dual Spares

Heatguard® TMV3-8 Spares

Heatguard® TMV3-8Fully approved by Buildcert and the TMV3 scheme for basin, bidet, shower and high pressure bathfill applications • Union connections give total installation flexibility •Rapid failsafe on either hot or cold supply failure • Unique purpose built adjustertool prevents unauthorised tampering • Brass adaptor available which allows for easy installation of a cold water feed direct from the 4 in 1 isolating elbow

Product Size Code Price(£)

Heatguard® Dual full internal service kit N/A SKIT110600 50.85Heatguard® Dual seal service kit N/A SKIT110605 16.10Heatguard® Dual 2 in1 service kit N/A SKIT110610 20.00Heatguard® Dual 4 in1 service kit N/A SKIT110615 54.10Heatguard® Dual replacement cap N/A ZCAP110600 3.80


Heatguard® TMV3-8 2 in1 adaptor service kit N/A SKIT219053 18.40Heatguard® TMV3-8 4 in1 adaptor service kit N/A SKIT300020 22.95Heatguard® TMV3-8 full internal service kit N/A SKIT170015 64.90Heatguard® TMV3-8 replacement cap N/A ZCAP160001 2.95Heatguard® TMV3-8 temperature adjusting key N/A ZKEY160001 1.85

Product L/min. Size Code Price(£)

Heatguard® TMV3-8 2 in1 37 at 2.5bar 15mm HEAT160015 110.90

Heatguard® TMV3-8 2 in1 37 at 2.5bar 22mm HEAT160020 114.15

Heatguard® TMV3-8 2 in1 - Universal 37 at 2.5bar 15/22mm HEAT160005 115.20

Heatguard® TMV3-8 4 in1 37 at 2.5bar 15mm HEAT160030 131.35Heatguard® TMV3-8 4 in1 37 at 2.5bar 22mm HEAT160035 134.60Heatguard® TMV3-8 4 in1 - Universal 37 at 2.5bar 15/22mm HEAT160025 139.95Potable water brass adaptor N/A ¼" MBSP x 15mm ZADP110780 4.85


ProMix® 22-2 4 in1 68 at 2.5bar 22mm PROM022007 430.55Single piece cartridge N/A N/A SKIT320032 270.40Seals service kit N/A N/A SKIT330009 6.704 in1 adaptor service kit N/A N/A SKIT300011 28.15Spare bracket for ProMix 22-2 N/A N/A BRKT300010 31.70


Heatguard® LS2 2 in1 23 at 2.5bar 15mm HEAT260500 89.30Heatguard® LS2 full internal service kit N/A N/A SKIT260510 37.85Heatguard® LS2 check valve service kit N/A N/A SKIT260520 21.65


Heatguard® BF2-2 2 in1 85 at 2.5bar 22mm HEAT115100 239.20

Heatguard® BF2-2 4 in1 85 at 2.5bar 22mm HEAT115105 247.50

Heatguard® BF2-2 full internal service kit N/A N/A SKIT115001 76.802 in1 adaptor service kit N/A N/A SKIT219053 18.404 in1 adaptor service kit N/A N/A SKIT300020 22.95Potable water brass adaptor N/A ¼" MBSP x 15mm ZADP110780 4.85

34 35

TEMPERATURE CONTROL

TEMPERATURE CONTROL




Large Group Mixing Valves &Specialist Mixing ValvesLarge Group Mixing Valves

Heatguard® UFHHigh flow rates - suitable for systems up to 250sqm • Quick reaction to supply temperature changes, keeps system temperatures stable • User adjustable between 30-60°C to be suitable for all types of floor • Compression type connections for ease of installation • Lockable temperature adjustment mechanism to prevent tampering

Heatguard® Tempering Valve Pre-set and locked at 55°C • 22mm direct compression connections • Tamperproof cap • Provides stable mixed water temperature • Easy and quick to install • Complete with 22mm direct compression connections

MasterguardIntegrated fixing point allows easy wall or floor fixing • Designed for large installations, with extremely stable outlet temperatures • Adjustable set temperature mechanism with locking feature, allows installer flexibility • Minimal moving parts and simple construction reduce maintenance service intervals • 4 in1 installation fitting provides easy orientation of valve to match inlet pipes, and includes cross-flow prevention, isolation and filtration protection

Euromixer®

Adjustable or lockable temperature control gives complete flexibility to the installer • Specifically designed for high flow rates, suitable for feeding 1 to 10 showers or taps • 1"x1" or 1"x1¼" Female BSP connections to suit all types of pipework • 4 in1 service fittings provide isolation, filtration, cross-flow prevention and a gauge port for testing in a single compact unit

Heatguard® PlanarSpecifically designed for high flow rates, suitable for feeding multiple shower systems • Ultra stable mixed water temperature even under extreme or unusual supply conditions • Quick reaction wax thermostats provide fine temperature control even with varying outlet flow rates • Optional user-adjustable or lockable (and tamperproof) temperature control gives complete flexibility to the end user • High flow rates for valves in this class • Compression connections on the inlets and outlet for ease of installation • 4 in1 service fittings provide isolation, filtration, cross-flow prevention and a gauge port for testing in a single compact unit


Heatguard® tempering valve 22mm HEAT110505 87.60


Heatguard® UFH 22mm HEAT219058 101.20Heatguard® UFH 28mm HEAT115002 162.55


Masterguard 830 4 in1 120 at 2.5bar 1" FBSP MIX83004 678.15Masterguard 840 4 in1 170 at 2.5bar 1¼" FBSP MIX84004 699.65Masterguard 850 4 in1 260 at 2.5bar 1½" FBSP MIX85004 1184.05Masterguard 860 4 in1 360 at 2.5bar 2" FBSP MIX86004 1291.70


Euromixer® 630 group mixing valve 4 in1 120 at 2.5bar 1" FBSP HEAT630100 723.35Euromixer® 640 group mixing valve 4 in1 150 at 2.5bar 1¼" FBSP HEAT640100 753.50Full internal service kit for Euromixer® 630/640 N/A N/A SKIT630001 84.40


Heatguard® Planar 230 4 in1 50 at 2.5bar 15mm HEAT230100 442.75



Heatguard® Planar 530 4 in1 170 at 2.5bar 28mm x 35mm HEAT530100 1277.00

Full internal service kit for Planar 230 N/A N/A SKIT230100 76.80Full internal service kit for Planar 330 N/A N/A SKIT330100 88.70Full internal service kit for Planar 530/430 N/A N/A SKIT430001 98.45Planar 230/330 4 in1 adaptor service kit N/A N/A SKIT300020 22.95Planar 530/430 4 in1 adaptor service kit N/A N/A SKIT300016 37.35

36

TEMPERATURE CONTROL


List Price exc. VAT

Solar Valves & TMV Accessories

TMV3 Thermostatic TapsThermostatic Tap SparesTMV3 Shower ValvesTMV2 Thermostatic Bath Shower Mixers & TMV2 Bar ShowersShower KitsKitchen MixerSingle Lever Basin MixerQuarter Turn Pillar TapsTimeflow TapsBib TapsTimeflow Control ValvesShower PanelsShower Panel AccessoriesTimeflow Shower ControlsShowerheadsTouch Sensitive ControlsWall OutletsInfra-Red Controls

Solar Valves High flow design – designed especially for use on high flow, large capacity systems with reduced head loss • High endurance – will endure the extreme temperatures present in solar installations • Union connections, easy to install and remove for servicing of strainers • Strainers upstream of checks – protect valve and check valves from impurities in the water supply • Tamper-proof adjustment – special adjuster key or locking ring eliminates chances of accidental adjustment • Individually tested and calibrated to ensure higher quality and performance

Thermometers and Probes

Solar Transfer ValveHigh thermal endurance, will endure the extreme temperatures present in solar installations • Specifically designed to ensure the water will always be heated to a minimum temperature by diverting water to an alternative or secondary heat source • Tamper-proof adjustment by a special adjuster key eliminates the chances of accidental adjustment


Solar valve - universal 15/22mm HEAT110092 104.40Solar Valve – high flow 22mm HEAT115090 175.00


Solar transfer valve 22mm STRN100001 106.60


Temperature read out with probe N/A READ500005 72.10Temperature probe plug socket N/A PLUG500001 10.15

Documents

Accessories - Neville Lumb · Heatguard® BF2-2 Sports Specifically designed to give high flow rates on low pressure systems • Ideal as a small group mixing valve and for fitting