CENTROIDTM CNC Touch ProbeDP-4

Accurate & Reliable alternative to expensive CNC Touch Probes

• UnidirectionalRepeatability.00004”(1micron)• PartProbing,FixtureOffsets,&Digitizing• StateoftheartKinematicdesign•Mountstoany1/2”toolholder•Customizablemountforspecialapplications• Smalldiameterbody1.25”(31.8mm)•Cablecommunicationforreliability• InterchangeableStyli•WorkswithmostanyCNCcontrolorDROwithaprobeinputandprobesoftware

Forusewith:MachiningCenters,Lathes,TurningCenters,Routers,CMMs,Horizontals,Gantries,BedMills,KneeMills&more.

CENTROID159 Gates Road • Howard, PA 16841Sales: (814) 353-9256 • Fax: (814) 353-9265www.centroidcnc.com

© Copyright 2012-15 CENTROID 4-23-15 rev 9

• Copyandreproducecomplex3Dpartsfromoriginals• AutomaticJob&WorkCoordinateSystemsetup• Measurepartsbeforetheyareremovedfromthemachine• Eliminatetheneedforexpensiveindicatorsandfixtures• Moreaccurateandrepeatablethanmanualpartsetup• Increasethroughputonthemachine• Reducereworkandscrap,shortenleadtimes

Probing directions X +/- , Y +/- , Z -

Unidirectional repeatability 0.00004” (1 um)

Probe deflection force (X,Y) 3 ounce w/ 1.693” L (43mm) stylus

Probe deflection force (Z) 9 ounce minimum

Probe body diameter and length D=1.25” (31.8mm), L=2.2” (56.4mm)

Mounting shank diameter D=0.5” (12.7mm), L=1.47” (37.2mm)

Stylus thread mount M3

Over travel limit angle (X,Y) +/- 10 degrees from vertical

Over travel limit (Z-) 0.15 inch (3.8mm) maximum

U.S Patent # 6553682

DP-4Specifications

TheCENTROIDDP-4CNCTouchprobeisdesignedforProbing(partsetup,zerolocationsetup,andCMMtypelocationandmea-surementofpartgeometry),component/fixture/workpiecesetup,inspectionand3Dor2Ddigitizing/surfacing.TheDP-4CNCTouchprobeismadeintheUSAwithpatentedtechnology.ManufacturedofstainlesssteeltheDP-4’smechanismrequiresonlyafeather’stouchtotrigger.TheDP-4’slowtriggerforceallowstheuseofsmallstyliformaximumdetailandaccuracy.CommonlyusedonMill-ingmachines,Machiningcenters,RoutersandTurningcenters.TheDP-4isastateoftheartmechanicaldesignandiscompatiblewithmostCNCcontrolsandDRO’sthathaveaPLCinputforprobesandprobesoftware.TheCENTROIDDP-4isreliableandisanaffordablealternativetoRenishaworMarposstouchprobes.PreviouslysoldexclusivelyforusewithaCENTROIDCNCcontrol,nowtheDP-4isavailableforusewithotherCNCcontrolsandDRO’ssuchasFagor,Haas,Fanuc,Fadal,Mazak,Mach3andmanymore.

• Increasemachinetoolautomationandreducehumanerror• AutomaticVise/Fixturesetup,noalignmentneeded• WorksinconjunctionwithCoordinateSystemRotation.• Findsdiameters,locations,angles&features• Automaticpartfeaturelocationandsetup,greatforrepairs• Muchfasterthansettinguppartsmanually• Nobatteries,nolightingrestrictions,noRFcrosstalk,justreliableeasyplug-and-playoperation

Kitcontains:DP-4probe,manual,externalprobecable,internalcontrolcable*,2.5mmstylus,5mmstylus,tools,1”standardboregauge.

Renishaw is a registered trademark of Renishaw plc UK, Marposs is a registered trademark of Marposs S.p.A ItalyAll other trademarks and registered trademarks are the property of their respective owners.