Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
ACE HYDRAULIC & PNEUMATICS/ACADEMY TOOL & SUPPLY
www.acehydraulic.com
January 31, 2020
SALES • SERVICE • PARTS
some quantities
limited
Distributors of INDUSTRIAL TOOLS & SUPPLIES
List 1401.43 SALE $890
Model 6917Air-Operated Portable Grease Pump PackageHigh volume and pressure wipes 120 lb. drum sides clean and keeps the drum primed.inc. high pressure 50:1 pneumatic pump, high pressure grease control valve, universal swivel and coupler and 7’ hose; drum cover, flexible follower plate and band dolly with wheels.
List 1526.68 SALE $979
Model 989
Grease Pump Gear Lube
List 1005.00 SALE $850
Model 282396
3:1Oil Stub PumpStub Pipe ConnectionAir OperatedSeries 25 • 3:1 • Motor Oil, ATF, Gear Lube and Other Fluid Lubricants
25-50 Pound PailSteel cover has three thumb screws to clamp security to any original 25-50 pound refinery container. Bucket not included.
2 Ton Capacity. Heavy duty chassis. Economical for a variety of automotive shop uses. Low 2-3/4” low lift height. Safety by-pass system. Heavy duty chassis. 50.25” long two-piece handle. Foam handle sleeve is included. Dual pump piston de-sign raises the jack to maximum height in 8-1/2 pump strokes, U-joint release mechanism for more control.
Model 71233A
2 Ton Floor Jack Double Pump
SALE $298
Load Capacity 1 poundsHeight 37.0 inchesLength 34.0 inchesMax Lifting Height 1.0 inchesRust inhibitive coating on rams. Foot operated pump and lowering pedals.1/2 Ton Telescopic Transmission Jack is designed for the removal, installation and transportation (in the lowered position) of transmissions and transfer cases on passenger cars, vans and light trucks that are raised by an in-ground or above-ground lift. List $1557.00
Model 72500E
1/2 Ton Telescopic Transmission Jack
SALE $1063
Model 71335
3 Ton SUV Floor Jack
List $568.00 SALE $388
Model 936523 Ton Floor Jack
List $867.13
SALE $479Assembled in the USA
• Cast iron lift arm for heavy duty loads • U-joint release mechanism for precise load control • Min. Height: 4 1/2” • Max. Height: 20 1/4” • Jack Size: 28 1/2” L x 14 7/8” W
Model 7793B
List $1325.00 SALE $695
1/2 Ton Telescopic Transmission JackFoot activated pump pedal for hands free raising of the rams. Extended to reach a maximum height of 74 inches. Lowered telescopic rams enable the transmission to be transferred from the jack to the work table. Nylon strap tie down secures the load to the saddle. Overload valve prevents jack from being used beyond its rated capacity
Designed to be used as an aid in the removal and installation of automotive and light truck transmissions, transfer cases and transaxles. They are intended for use under an overhead lift or in a garage pit.Specifications:Capacity: 1000 lbs.Base Size: 34-1/8 x 35-1/2 in.Min. Height: 37-7/8 in.Max. Height: 77-5/8 in.Saddle Spread: 11-1/2 ~ 21 in.List $2046.31
Model BH70511/2 Ton Telescopic
Transmission Jack
SALE $1495
6720 VIP Parkway • Syracuse, New York 13211 Phone 315-454-8989 24 Hour Fax 315-455-9522
Steel hydraulic block construction includes a double pump piston design that quickly raises the jack to the maximum height. 4” low and 21-3/8” maximum lift heights (without saddle adapter)7” low and 24-3/8” maximum lift heights (with saddle adapter)Safety by-pass system protects pressure cylinder
Safety overload system Heavy-duty chassis
SALE $239
Model 3601
Tank Capacity 72.0 Qts./68.1 LtDrain Bowl Capacity11 Qts./10.4 Lt
For draining, transferring and evacuating motor oils, transmission and power steering fluids quickly. Offers excellent mobility, easy bowl positioning and simple-to-use pressurized evacuation. List $393.00
Pressurized Used Oil Receiver
SALE $725
Model 3624
High-strength polyethylene reinforced tank and bowl means no corrosion, no denting, no swelling• Evacuates easily with standard shop air• Large capacity: 26 gallon / 100 liter• Large tool tray and convenient oil filterdrain are built into the top of the tank• Includes fluid level sight gauge, fixedair regulator and safety relief valveList $939.00
Evacuation Tank
SALE $139
Power Unit Pump for Auto Lifts3HP, 1 Ph, 3360 RPM
SALE $495
Model BH-7003-01
Vertical Mount Power Unit for Auto Lifts1HP, 1 PhIdeal for Parking Lifts, Hobbyist Lifts and Storage Lifts
SALE $495
Model BH-7003-02Horizontal or Vertical Mount Power Unit for Auto Lifts3/4 HP, 1 PhIdeal for Low andMid-Rise Lifts SALE
$495
Model BH-7003-03
Oil Lift Drain 8 GallonsQuick release height adjustmentIncreased stability8 gallon translucent jug with the new shape in lift drainsReinforced base will not warp with hot oil.List $193.00
Model 11102
ACE HYDRAULIC& PNEUMATICS
TERMS and CONDITIONS: Prices subject to change without notice in accordance with manufacturing costs. We have the right to limit quantities. SUPPLIES MAY BE LIMITED. We are not responsible for typographical errors.
All returns MUST be unused and in original box. NO RETURNS ON SPECIAL ORDERS. NO C.O.D. All items FOB Syracuse, NY. Items marked free freight applies to continental USA only.
SOME QUANTITIES LIMITED • PRICES MAY FLUCTUATE DUE TO TARIFFSwww.acehydraulic.com
WE STOCK A LARGE VARIETY OF ENERPAC & POWERTEAM ACCESSORIES
Diaphragm Pump Alemite Diaphragm Pumps are designed for both high volume transfer and dispensing a variety of low viscosity fluids including new oil, used oil, windshield washer fluid, antifreeze, and other materials.
SALE $595
Air Inlet: 1/4”Body: AluminumDiaphragm: BunaPressure: 100 PSIInlet/Outlet: 1/2”
Model 8322 Air Operated
List $726.00
1” Diaphragm Pump
SALE $620
Model 8323 Air OperatedDiaphragm Pump
Pump Body: Aluminum Wetted or Soft Parts: PTFESize Inlet NPT in.: 1 Size Outlet NPT in.: 1Free Delivery Gallon: 45 Free Delivery Liter: 170.3Air Inlet NPT(F) in.: 1/2Maximum Pressure: 50 psi/3.45 barElement Particle Size : 1/4 in./6.35 mmApplication: Unleaded gas, diesel, kerosene used oil
SALE $1100
Model 85635
List $1500.00
Air Inlet 1/2”Description 1” Diaphragm PumpBody Material AluminumDiaphragm Material BunaPressure 125 PSIMaterial Inlet/Outlet 1”Delivery (GPM) 45Recommended Fluids New/Used Oil
List $922.91
Model 1210SPneumatic Breaker
Chuck / Shank Size1” x 4-1/4”This tool is lightweight, fast and very hard hitting. It is most often used on jobs where weight restric-tions are in place such as ramps, bridge decks and some highway jobs. Equipped with a muffler.
SALE $895
Model 716
SALE $159 SALE
$210
Model CP7120Needle Scalers
List $318.00
BPM 4600 Adjustable sleeve, 19 x 1/8” (3 mm) steel needles and 1.37” (35 mm) width chisel with high resistance to wear
Power to loosen the toughest fastener. Weighs less than 12 lbs. 6 vane motor for speed - power with any 1/2-Inch hose air supply. Twin Hammer high performance clutch. Ergonomic handle exhaust keeps exhaust air away from the operator
Chicago Pneumatic
3/4-In. Super Duty Air Impact Wrench1200 Ft. Lbs. of Torque
SALE $495
Model CP7763 IngersollRand
IngersollRand
3/4” Super DutyAir Impact WrenchJumbo hammer mechanism.Up to 1,000ft.-lbs. of torque.Trouble-free, longer performance aided by Pressure-Feed Lube System.Compact and only 7 5/8” long.Handle exhaust.
Model 261 Model 285B-6
SALE $495 SALE
$595
1” Drive Heavy Duty Impact Wrench with 6” AnvilAdjustable 3 position power regulator provides ultimate power control. Robust 6 vane air motor delivers 1,450 ft./lbs. maximum torque. Free speed: 5,000 RPM
SALE $495
Astro Pneumatic
Model 7865
Set contains C-frame press, 3 receiver tubes sizes: 2-3/4”x3”, 2-1/4”x 2-1/2” & 1-3/4”x2”, installation and removing adaptersSet also includes 4-wheel drive ball joint service kit SALE
$119
Ball Joint Service Tool Kitw/4-wheel Drive Adapters
1 Gal.
SALE $89
Pneumatic ToolAntifreeze LubricantPneumatic tool anti-freeze and lubricantPrevents freezingFire resistantAbsorbs moisture
• Develops 10,000 PSI• Has 3/8” NPTF Fluid Coupler• Size: 16-3/4” x 6” x 6-5/8
High-pressure hydraulic hand pump for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately)Advances and releases a single-acting cylinderMaximum operating pressure of 10,000 pounds per square inch (psi)Single-speed pump for applications with a constantly applied load Internal pressure relief valve helps prevent pump overload
Single Speed Steel Hand Pump
SALE $459
Air/Hydraulic Foot Pump
Model 22903
SALE $395
Model P39
Industrial 0.401 shank Air HammerSuper durable for industrial markets3,500 blows per minuteQuick change retainer for simple accessory changes
SALE $495
Sand RammerUSA Made
Bore 11/16”Stroke 2”Taper SBlows per Minute 1600Length 11-3/4”Weight 3.75lbs.Air Inlet Thread 3/8”Butt Diameter 1-3/4” Rubber
Model B651144 Ton Porto Power List 291.00
Model B65115 10 Ton Porto-PowerList 467.00
SALE $269
SALE $395
Torque Wrench
3/4 Inch Drive 100-600 ft lbs
SALE $495
Model 97355
Ratchets in only one direction. Rubberized head. Selected reading is automatically locked in. Indicates desired torque by feel and sound. Accuracy +-4 percent right hand and +-6 percent left hand direction from 20-100 percent of capacity. Rugged non-slip metal handles. List $820.00
Ram Pump Ram Ram Ram Model Capacity Capacity Close Hgt Ext Hgt Eff Area GWB65114 4 ton 8,000 psi 11” 15-3/4” 1.0 in2 46 lbsB65115 10 ton 10,000 psi 13 5/8” 19-3/4” 2.4 in2 88 lbs
Effortless air operation. Air Turbo Motor . Built-in by-pass device protects hydraulic system. Versatile “Quick Connector” design for easy removal of air hose from air motor allowing compact storage or remote operationAll air bottle jacks have chrome plated ramsList $653.00
Model SFA1820920 Ton Low Profile Air Actuated Bottle Jack
SALE $435
27 x 48 5500Lb. CapacityPallet Truck