Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
(1) Metal-to-metal contact of cam followers to steel turntable cause noise and high wear.
(2) Chain and sprocket systems require proper lubrication and adjustment. Chain will sag and cause uneven wear of sprocket.
(1) 48" diameter urethane race provides broad balanced support.(2) Sealed-for-life bearings.
• No maintenance, no lubrication.• Dependable belt drive.• No metal-to-metal wear.• Washdown capability.
Actual features from their website
Lantech sales will tell customers that the Q300 is the only Stretch Wrapper that is Truly 100% No Maintenance Required system.
Old Technology
•• 4 year old Lantech Q300 Base4 year old Lantech Q300 Base
Note the Metal to Metal wear.Note the Metal to Metal wear.
••Note the Belt DriveNote the Belt Drive
••But the most important nonBut the most important non --feature is no bottom support feature is no bottom support plate, uneven floors will cause their turntable to wear unevenlyplate, uneven floors will cause their turntable to wear unevenlyas you can see hereas you can see here …….and this is the reason they can.and this is the reason they can ’’ t lift their t lift their machine from the FRONT.machine from the FRONT.
They mention that they have They mention that they have 36 support bearings, but it36 support bearings, but it ’’s s Only 12 with 3 per support.Only 12 with 3 per support.
This is their belt drive system that they say is used on Harley Davidson Motorcycles, if it can handle that is can drive a turntable. The belt is not heavy duty, does crack and break, and we have seen hundreds slip because of load weight and wet – slick environments
This is what happens when you drop a load This is what happens when you drop a load a little hard and at an anglea little hard and at an angle
•
SML-150 Base 4000 LB 24 Supports
•Right angle supports
•Bottom support plate
Yes true, We drive our turntable with a chain and sprocket. This type of drive system will last forever with little to no maintenance.
•Chain Tensioner
SML-200 Base 5000 LB 32 supports
•Chain Tensioner
•Chain Tensioner
Lantech’s Steel casters can rust – not 100%
maintenance free if you have to change out the
rusted casters
No rust problems with Wulftec’s sealed bearing non-metallic lube-free supports
Our High Profile Drive.
• Exposed components susceptible to damage and can cause operator injury.• Maintenance access is difficult.
• Boxed top and bottom for support and strength.• Structural steel tubing.• Steel cross member reinforcements.• ABS panels allow easy service access and will not rust or dent.
Overcoming the Lantech Propaganda….
ABS Panel cracked…we have literally seen hundreds of these panels crack, missing, hanging, and never looking like when they bought it.
Frame without ABS Plastic PanelsNo matter what they call it……ABS is still PLASTIC !!!
• Typically 20"-25" ring gear bearing.• Smaller diameter bearing does not distribute weight of load effectively.• 33" bearing on some high speed models.
• 38" precision ring bearing for high speed / heavy duty applications (6000 lb loads).• 38" slew bearing.
Now with their Auto Turntables
• Emergency stop can shear pinion gear teeth.• Ring and pinion drive is expensive to reset.• Can cause machine damage in emergency stop condition.
• Kevlar reinforced belt will not stretch, dry out or tear. Used in bullet proof vests.• Idler pulleys provide consistent positive drive, allow no slippage, do not tear and no maintenance needed.
25” diameter, 2” Thick Ring Gear Driven by a Pinion Gear 10 Yr Warranty.
• Top latching gate is difficult to close and may malfunction.• Welded bottom hinges can warp and break.• Film payout opposite operator side.
E-Z Thread™ roll carriage loads film correctly every time.• Side mounted roll carriage is easy to load and reduces risk of back and hand injury.
Film Carriages
Their EZ Thread is actually the hardest to thread carriage in the industry. You must feed it through a roller in the farthest point on the carriage, because of it’s side mount latch.
Our No Thread Carriage is actually just that. And with our new spring loaded gate you can be assured that your prestretch level is consistent forever.
No Cost EVER
$450 to buy, every three years they wear out, more if you cut them.
Membrane style control panel is like all other membrane panels….usually broke with hard use. As you can see with the warning “”Do Not Press Buttons with Sharp Objects”.
Standard Allen Bradley Push Buttons
$1,100 to replace the panel
$23 to replace a button
(1) Roll Carriage(2) Chain Drive
• Chain driven roll carriage exerts downward force equal to weight of roll carriage plus downward force of chain drive.
(1) Counterweight(2) Roll Carriage
• Counter-weighted roll carriage reduces cumulative downward force to less than half the weight of roll carriage.
Overcoming the Lantech Propaganda….
This is an actual belt sheared in two
We have also seen belts wrap the opposite way on the rollers, causing direction to reverse.
In 15 years of service, our dual chain lift system has never failed. Not once.
It keeps speeds constant and can lift 30 times the weight of the film carriage