Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Advanced Biofuels and Biorefinery Platforms
Is Technology Integration the "Right" Value Proposition for Rural Sustainability?
Mojgan Kavoosi, BECii Corp.
Collaboration is a powerful new sustainable business model. Biowaste to Energy for Canada
Integration Initiative (BECii) Corp. is an industry led, industry-focused initiative building a
commercial scale Integrated Bio-Refinery™ demonstrating waste-to-profit strategies. Located in
rural Hairy Hill, Alberta, this integrated technology cluster consists of a 2.5 MW biogas power
plant and a 40 M L/year ethanol production facility co-located with a 36,000 head of cattle
commercial feedlot operation. This Integrated Bio-Refinery™ is both an effective waste
management strategy, processing over 260 tons/day of manure and municipal source
separated organics (SSO) waste, and an example of an innovative model for rural sustainability.
This collaborative framework produces cleaner air, lower cost energy, increased local
employment opportunities, and provides the feedlot with benefits that allow it to be one of the
lowest carbon footprint commercial feedlots in Canada. In this presentation, we will discuss the
synergies involved in the Integrated Bio-Refinery™, some of the technical challenges
encountered during integration, and the economics surrounding this collaborative model. In
addition, we will briefly touch upon other innovative synergistic partnerships under
consideration for addition to this Integrated Bio-Refinery™.
Potential of thin stillage as a low-cost medium for direct bioconversion of cellulose into
ethanol and hydrogen
Rumana Islam, University of Manitoba
An ideal fermentation medium for commercial-scale production should be inexpensive, able to
supply essential growth nutrients, and be readily available. Thin stillage (TS) generated in dry-
grind ethanol facilities is rich in many essential macro- and micro-nutrients. Drying of TS to
produce dried distillers grains with solubles (DDGS) consumes over half of the thermal energy
required by an ethanol plant. Therefore utilization of TS was investigated as an alternative
nutrient medium for Clostridium thermocellum DSM 1237 during direct fermentation of
cellulosic substrates into ethanol and hydrogen. Various concentrations (5 - 400 g/L) of TS were
used to support growth C. thermocellum on cellulose (10 g/L), replacing all ingredients of the
regular growth medium except buffering agents. Cultures with 50 g/L TS showed the best
performance representing 100% and 81% of H2 and ethanol respectively produced by cultures
on the regular growth medium. Cell growth monitored using a quantitative polymerase chain
reaction (qPCR) technique showed a slower growth of C. thermocellum with increasing
concentration of TS in the culture media. Magnesium supplementation of 50 g/L TS medium
resulted up to 59% more ethanol compared with the unsupplemented TS medium.
Microbial demetallization of metallic compounds in crude oil
Hossein Salehizadeh, University of Isfahan
Out of 19 microorganisms isolated from polluted soils of the Isfahan Refinery Company in the
center of Iran, a strain identified as Aspergillus sp. (designated MS-100) was selected based on
the capability of utilizing vanadium oxide octaethyl porphyrin (VOOEP) as sole carbon source.
The degradation percentage of VOOEP before optimizing was 37% at 20 °C after 7 days. The
optimum values for pH, temperature and VOOEP concentration obtained were 5.5, 30 °C and
20 mg/l, respectively. The UV-visible spectrophotometric experiments and HPLC analyses
confirmed the degradability of VOOEP in crude oil up to 50-55% under optimum conditions
during 7 days. The release of vanadium (0.96/2 mgl-1) into the aqueous phase was proved using
atomic absorption spectroscopy. Briefly, Aspergillus sp. was exhibited a high potential to utilize
VOOEP as a model for protoporphyrins metallic compounds in crude oil and released
considerable amount of vanadium in aqueous phase.
Production of ethanol from corn stalks using an engineered strain of Saccharomyces
cerevisiae
Qiuwei Zhao*, Institute of Microbiology, Chinese Academy of Sciences
Cellulosic ethanol has been widely regarded as an attractive alternative fuel, due to the
sufficient supply of feedstocks, the rapid advance on pretreatment, and the decreased cost of
biomass hydrolysis. Efficient co-utilization of xylose and glucose is critical for cellulosic ethanol
production. Recently, many efforts had been made to introduce the xylose metabolic pathways
into S. cerevisiae. However, most of the engineered S. cerevisiae strains cannot metabolize
xylose well under anaerobic condition. In this study, we engineered S. cerevisiae by introducing
xyl1 and xyl2 genes from Pichia stipitis and overexpressing its own xk gene. The engineered
strain was subjected to continuous evolution with dissolved oxygen concentration gradually
decreased. The resulted adaptive strain, S. cerevisiae W32N55, could efficiently metabolize
xylose under static condition, and tolerate the inhibitors in cellulosic hydrolysate. Furthermore,
a fermentation-membrane pervaporation coupling process was developed and applied in the
fermentation of the hydrolysate of steam exploded corn stalks. Using such a process, the final
ethanol concentration reached 70 g/L, with a yield of 220 kg ethanol per ton steam exploded
stalks.
*Additional authors: Bo Zhang, Hongbing Sun, Haifeng Zhang, Taicheng Zhu, Jing Li, Yinhua
Wan, Yin Li, Yanping Zhang
A novel continuous oil seed extraction method for jet fuel production
Kasiviswanathan Muthukumarappan, South Dakota State University
The majority of oil seeds are extracted using hexane; however, this method has major
drawbacks. Hexane emissions negatively impact the environment, and hexane’s low flash point,
explosive vapor, and toxic residuals create costly safety issues. Thus, finding an alternative oil
extraction method to achieve the lowest environmental impacts and to further develop green
chemistry is of utmost importance. A novel continuous oil seed extraction process will be
carried out by simultaneous application of a single-screw extruder and two biodegradable
solvents, d-Limonene from citrus peels and a-Pinene from pine gum, for three types of oil
seeds. A 23 full factorial design for the 2 levels of barrel temperature (T) (80 and 120 °C), 2
levels of screw speed (SS) (80 and 150 rpm), and 2 levels of solvent to oil-seed ratio (R) (10 and
15% w/w) were conducted for the two proposed solvents separately to investigate the effect of
extrusion condition and R on the oil content of the extruded seeds. Oil content was determined
using an appropriate apparatus depending on the solvent boiling points and quality of the
extracted oil in terms of free fatty acid profile, heating value, and Elemental analysis were
determined using GC, Bomb calorimeter, and Elemental analyzer, respectively. It was clearly
observed that at higher SS of 100 rpm and T of 120 °C, application of 10% Ethanol led to 28%
and 8% increase in oil contents of the one-time extruded seed and doubled extruded seeds,
respectively compared to those of the seeds extruded at the same condition without Ethanol
treatment.
Biodiesel from high free fatty acid rice bran oil using heterogeneous catalyst
Rajiv Arora, Shaheed Bhagat Singh State Technical Campus
Most of the biodiesel production is by process of alkaline catalyzed transesterification on edible
oils. The cost of these edible oils is quite high. Cost of waste and high free fatty(FFA) acid oils is
almost one half to one third that of refined oils, but the production cost increases due to
additional steps for converting free fatty acids to esters. The FFA of the oils should be less than
2% for further transesterification to biodiesel. In the present work, the esterification process for
the reduction in FFA of rice bran oil with 70% FFA using strong homogeneous aluminum doped
sulfated zirconia has been investigated. The various process variables like temperature, catalyst
concentration, amount of methanol and reaction time were optimized with the objective of
producing low FFA oil. In the transesterification step, MgO impregnated with KOH was prepared
by wet impregnation method and this alkali-doped metal oxide catalyst was evaluated for
activity in the transesterification of rice bran oil to biodiesel. Also these catalysts appeared to
be promising candidates to replace conventional homogeneous catalysts for biodiesel
production as the reaction times are low enough to be practical in continuous processes and
the preparations are neither prohibitively difficult nor costly. Also the heterogeneous catalysts
can be separated from the final product by filtration which prevents the consumption of large
volumes of water.
International Regulation of Industrial Biotechnology
David Glass, D. Glass Associates, Inc.
Uses of genetically modified organisms in production of fuels and chemicals are rapidly moving
towards commercialization in the United States and elsewhere in the world. Such projects may
face differing regulatory requirements in different regions of the world, with considerable
differences likely to be found between different countries. Although regulatory regimes,
including oversight over biotechnology, are well established in many developed nations, this is
likely to be less true in nations in the developing world, where many biofuel projects may be
located. Many countries have based biotechnology regulations on the principles of the
Cartagena Protocol on Biosafety, but within the developing world, approaches to implementing
the Protocol differ widely, and many signatories of the Protocol have yet to establish national
regulations. This presentation will give an overview of the regulations that industrial
biotechnology projects using modified microorganisms, plants or algae might face in different
countries or regions of the world, but may also discuss applicability of other regulatory
programs such as the U.S. Renewable Fuel Standard and the EU Renewable Energy Directive
(RED). To the extent possible, the presentation will include one or more case studies of
successful interactions with government agencies in the U.S. or elsewhere in the world,
including examples of Microbial Commercial Activity Notices (MCANs) reviewed by the U.S.
Environmental Protection Agency for fuel or chemical projects. Recommendations for winning
strategies for dealing with regulatory agencies will also be presented. David J. Glass, Ph.D., with
over twenty five years experience with the industrial uses of biotechnology and
microorganisms, is an independent consultant specializing in renewable fuels and industrial
biotechnology regulatory affairs. Dr. Glass has longstanding experience with the biotechnology
regulations of the U.S. EPA and U.S. Department of Agriculture, extensive familiarity with
international biotechnology regulation as well as renewable fuel standards and other fuel-
related regulation in the U.S. and elsewhere in the world.
Feasibility and Environmental Impacts of the Production of Biodiesel from Grease Trap Waste
Megan E. Hums, Drexel University
Biodiesel is a renewable fuel that can be produced from a variety of vegetable oils, animal fats,
and waste greases. In 2013, the United States produced 1.2 billion gallons of biodiesel primarily
from refined soybean oil; although biodiesel producers struggle to compete economically with
petroleum diesel because the cost of soybean oil dominates the production costs. The use of
grease trap waste as a feedstock has lower feedstock cost and potentially lower environmental
impacts than agricultural oils, but requires additional or alternative steps for pre-treatment,
conversion to biodiesel, and biodiesel purification. Research at Drexel has demonstrated the
technical feasibility of production of biodiesel from grease trap waste; however, commercial
feasibility of producing biodiesel from grease trap waste is limited by the variability of its lipid
content, which ranges between 2-20%, by volume. This poster presents a process for
conversion of grease trap waste to biodiesel including the separation of lipids from grease trap
waste via heating and settling, esterification of lipids with methanol and sulfuric acid catalyst in
a bubble column reactor to produce crude biodiesel, and the purification of crude biodiesel
through washing and wiped film distillation. This research includes both techno-economic
analysis and life cycle assessment to compare the energy requirements and select
environmental impacts of biodiesel produced from grease trap waste to the impacts of low-
sulfur petroleum diesel and biodiesel from common feedstocks used in U.S. markets. Material
and energy balances in conjunction with experimental data and ASPEN simulations are used to
estimate raw material requirements, utilities, and waste generation of the biodiesel production
process. Results show that biodiesel produced from grease trap waste with lipid content above
10% by volume is competitive with other biodiesel processes both energetically and
environmentally. At lower lipid content, the separation of lipids from grease trap waste can be
difficult and costly which could eliminate the environmental benefits of producing biodiesel
from waste feedstocks.
The ElectrobiomeTM: a Microbial Platform for the Electrosynthesis of Chemicals and Fuels
from CO2.
Harold May*, Biomedicine & Environmental Science Center, Medical Univeristy of South
Carolina (MUSC)
The ElectrobiomeTM is for the chemical, fuel, polymer, and carbon capture/sequestration
industries. It is a microbial community platform that lives and operates within an
electrochemical bioreactor where it uses electricity to capture and convert CO2 into chemicals
and fuels. Unlike present synthesis methods, it avoids the use of fossil carbon, food crops,
arable land; and it consists of inexpensive, self-replicating microbes (not precious, rare-earth
catalysts). The system has been continually operating for more than two years, which
demonstrates sustainability that far surpasses other electrosynthetic microbiomes. As an
added benefit, the electrical input into the ElectrobiomeTM can be intermittent, allowing it to
run only when low-cost electricity is available. Production rates have reached >1 kg of H2 or
acetic acid per m3 reactor vol per day at a Coulombic efficiency (electrons cpatured in product)
of >90%. Total electrons passed through the ElectrobiomeTM indicate that acetate production
could reach a kg/m3/h, which would capture 1.5 kg of CO2 per kg of acetic acid generated.
Other products include formic, propionic, butyric, and isobutyric acids, and the entire collection
of products may be used as feedstocks for the biological production of liquid hydrocarbons and
bioplastics. Markets for all of the ElectrobiomeTM products are sizeable and growing (annual
global: H2 to $118B by 2016, fatty acids to $13B by 2017, and bioplastics in US to $7.7B by
2016). Further growth for most of these markets will depend on the availability of oil, gas and
coal, which are scarce in many countries and are an environmental concern, particularly as a
source of fossil carbon. The cost of the electricity (@$0.05/kWh) delivered to the
ElectrobiomeTM to produce 1 kg of product has been <$3 for H2 and $0.35 for acetic acid,
which places the system within range of becoming cost competitive. The H2 may be used
directly as a stationary or transportation fuel (1kg of H2 ≈ 1 gal gasoline equivalent) or for
further chemical or biochemical processing. Formic and acetic acids are used as food additives
and preservatives or to produce adhesives, plastics, paints, and dyes. All of these products may
be used as feedstocks for the production of bioplastics, and in another proprietary process the
inventors are modifying the electrobiome to produce liquid hydrocarbons. The intellectual
property associated with the ElectrobiomeTM is aggressively being protected through patent
filings, including application PCT/US2013/060131. For more information please visit
www.electrobiome.org.
*Team. Principal Investigator and Inventor: Dr. Harold D. May Inventor: Mr. Edward LaBelle
Inventor: Dr. Chris Marshall Collaborator: Dr. Pat Evans
Electrofermentation to Produce Fuels from Carbon Dioxide
Dan Derr, Logos Technologies
The ability to convert renewable electricity and captured carbon dioxide into liquid
transportation fuels is a novel approach to biofuels production. This approach has a number of
high risk technical challenges that need to be overcome for the economical production of fuel;
however the possible efficiency gains are large enough to necessitate exploration. If the
electricity is renewably generated from non-bio (e.g., solar, wind, or tides) sources the energy
inefficient photosynthetic step is taken out of the equation. Higher efficiency means land,
water, and nutrients necessary are also lower. Logos Technologies has designed and
demonstrated a technology which takes advantage of widely available electricity and carbon
dioxide for the production of biofuels. The technology is based on an electrofermenter – a
fermenter that generates hydrogen and oxygen in situ. Hydrogen and carbon dioxide gases are
consumed by a microbe in the production of biofuels. The microbes, Ralstonia organisms
provided by Steve Singer at the Joint BioEnergy Institute, grow and produce methyl ketones in
the presence of an applied electric field. This engineered Ralstonia eutropha has had a
modification to the fatty acid synthesis pathway that enables production of methyl ketones
from hydrogen, oxygen and carbon dioxide. These methyl ketones can be used as drop-in
replacements for petroleum derived fuels. We will discuss the design and operation of the
electrofermenter. Specifically, we will demonstrate growth of the Ralstonia organism in the
electrofermenter, including the optimum seed train approach and strategies for reducing the
effect of growth due to the oxygen produced at the counter electrode. We will also discuss our
progress in demonstrating methyl ketone production. Techno-economics will be presented
showing the commercial potential of the electrofermenter in alternative biofuel production.
Novel Bioreactor Designs for Rapid Methane Fermentation
Dr. Luan Nguyen, Calysta Energy, Inc.
Methane-based fermentation is fundamentally different from ‘traditional’ glucose-based
fermentation for several reasons, including: the low solubility of methane in aqueous solution,
the need to co-feed multiple (explosive) gasses at high mass transfer rates while simultaneously
allowing efficient extraction of CO2, and significant heat loads generated from the metabolism
of the high-energy methane substrate. These issues are more similar to those faced in
‘traditional’ chemical reactor design where many approaches to mitigate the above issues have
been developed.
Conventional stirred tank bioreactors are energy-intensive, typically operated at atmospheric
pressure with poor mass-transfer, and do nothing to mitigate the explosive mixture issue. Air-
lift reactors show poor mixing rates, poor heat transfer, and are unlikely to support the high
growth rates needed for a commercial process. Currently, the U-loop fermenter is the only
example of a purpose-built, commercial scale, operating methanotroph fermenter. However,
capital costs are very high, suggesting that the plant has been overdesigned.
The objective of this project is to develop key bioreactor technology to enable efficient
methane-to-biofuel fermentation processes. Although sugar-based fermentation is well-
established with a variety of off-the-shelf reactor technologies available, relatively little effort
has been expended to address gas-fed fermentations. This is significant because gas-fed
fermentations present a number of unique challenges which must be addressed, such as low
rates of heat and mass transfer and accumulation of explosive gas mixtures. By utilizing the
project team’s unique expertise in reactor design in the chemical industry and in methanotroph
fermentation, we plan to develop specialized reactors that can serve as the basis for the
production of a variety of fuels and fuel precursors via bioconversion of methane. Redesign of
the bioreactor will be performed using computational fluid dynamics (CFD) software FLUENT. A
bench-scale version of the new design will be built and tested using Calysta’s target strain to
demonstrate operating parameters and performance metrics.
The bioreactor technologies developed in this project will position methane as a new biological
feedstock for the domestic, cost-competitive production of biofuels (referred to as a biological
gas-to-liquids (BioGTL™) process). Importantly, the project team will make the developed
reactor technology available to the research community at large via partnering and toll
manufacturing. The availability of gas-fed reactors on a ‘pay-as-you-need’ basis is expected to
significantly reduce the hurdles for research groups to move from lab-scale to process
validation, resulting in a faster path to market for new methane-based bioprocesses.
Bio-GTL: Novel Biocatalyst For Conversion Of Natural Gas Into Diesel Fuel
Richard Bolin, NREL
We are developing technologies in which methanotrophic bacteria are used to convert
methane found in natural gas into lipids, which are in turn converted into diesel fuel. The
project seeks to significantly increase the amount of lipids produced by methanotrophs, and to
develop novel catalytic technologies to directly convert these lipids to liquid fuel. These
engineered microbes could enable scalable methane-to-liquid conversion at lower cost than
conventional methods. Scalable, microbe-based conversion would leverage abundant, domestic
natural gas resources and reduce U.S. dependence on foreign oil.
Algae, Specialty Crops, and Biomass Supply
Global Evaluation of Biofuel Potential from Microalgae
Jeffrey Moody, Utah State University
The evaluation of microalgae based biofuel production systems through lifecycle,
technoeconomic, and resource assessments have based growth models on the extrapolation of
laboratory-scale data due to the immaturity of the technology. This type of scaling leads to
large uncertainty in the results due to the inaccurate modeling of the current near-term
productivity potential which typically serves as the functional unit. This study integrates a large-
scale validated outdoor microalgae growth model that utilizes 21 species and reactor specific
inputs to accurately account for biological effects such as nutrient uptake, respiration, and
temperature with hourly historical meteorological data from around the world to determine
the current global productivity potential. A global map of the microalgae lipid and biomass
productivity has been generated based on the results of annual simulations at 4,388 global
locations spread over the 7 continents. Maximum annual average yields between 24-27 m3•ha-
1•yr-1 are found in Australia, Brazil, Colombia, Egypt, Ethiopia, India, Kenya, and Saudi Arabia
with the monthly variability (minimum and maximum) yields of these locations ranging
between 14 and 33 m3•ha-1•yr-1. A scalability assessment which leverages geographic
information systems data to evaluate geographically realized microalgae productivity, energy
consumption, and land availability has been performed highlighting the promising potential of
microalgae based biofuels compared to traditional terrestrial feedstocks. Results show many
regions can meet their energy requirements through microalgae production without land
resource restriction. Discussion focuses on sensitivity of monthly variability in lipid production
compared to annual average yields, biomass productivity potential, effects of temperature on
lipid production, and a comparison of results to previous published modeling assumptions.
Microalgae to Biofuels: Lifecycle Assessment of Alternative Conversion Technologies
Eddy Bennion, Utah State University
The high solar energy conversion efficiency of microalgae has led to the evaluation of it as a
feedstock for the commercial production of renewable transportation fuels and bio-products.
Technological challenges currently exist in the conversion and stabilization of microalgae based
bio-oils. This research uses a systems engineering approach, validated through experimental
data, to evaluate multiple conversion processes of microalgae biomass to biofuel. Pyrolysis and
hydrothermal liquefaction are the two conversion processes that this research focuses on
followed by supercritical stabilization. A system boundary of “cradle to pump” was defined and
includes biomass cultivation, dewatering, conversion, stabilization, conversion, and
transportation and delivery. Contrary to traditional solvent extraction systems, pyrolysis and
hydrothermal liquefaction both have the capability of improving yields through the conversion
of non-lipid constituents to bio-oil. The resulting bio-crude is further processed to a drop in bio-
oil through supercritical fluid processing techniques which stabilize the bio-oil followed by
processing to fuel through transesterification. Results are presented on the metrics of net
energy ratio and greenhouse gases. The net energy ratios from “cradle to pump” are 1.58 and
1.36 using pyrolysis and hydrothermal liquefaction as the conversion methods, respectively.
The net energy ratio is defined as the energy going into the system divided by the energy
coming out. A sensitivity to process parameters for identification of future research and
development focus areas is presented with results directly compared to tradition fuels and
currently published literature data.
Renewable Chemical Platforms and Biobased Material
Method of preparative scale production of immobilized lipases destined for bioconversion,
biotransformations and biorefining processes
Lukasz Stanczyk, Institute of Technical Biochemistry, Lodz University of Technology
Lipases are one of the most important and promising groups of catalysts used in industrial
biotechnological processes. They are particularly attractive since they catalyze various reactions
in aqueous and non-aqueous conditions, and exhibit the high catalytic activity and exquisite
substrate selectivity, stereoselectivity and enantioselectivity. Furthermore, immobilised lipases
can be reused, e.g., in continuous manufacturing processes often lasting several months,
thereby saving energy and reducing wastes. The potential of lipases has been only partially
exploited, mainly because of high costs of their purified preparations. Robust and inexpensive
lipolytic preparations, well suited to technological conditions have been still prospected for.
Certain whole-cell biocatalysts, like mycelium-bound lipases, which are presented in this work,
meet these requirements. The main objective of presented project is the development of a
method of large laboratory scale production of microbial lipase preparations, e.g. from lipolytic
Mucor circinelloides and Mucor racemosus strains, originating from pure culture collection at
ITB LUT. At IBT LUT it was developed the method of production of two forms of immobilized
lipases, potentially useful in various branches of industry: cosmetic, pharmaceutical, production
of biofuels, food processing etc. Their properties were also characterized. These immobilized
whole-cell preparations are as follows: 1. Mycelium of Mucor filamentous fungi, immobilized in
a porous carrier in the form of uniform thin foams with open porosity and the large internal
surface – for industrial applications this lipase may be adapted to the needs of a user. 2.
Dehydrated and ground Mucor mycelium (particles of around 3 µm in diameter), additionally
stabilized - for industrial applications in the form of water and/or organic solvents-insoluble
powder. Key elements of the technology include: - activation of fungal strains for efficient
production of the lipase (for transesterification of lipids with aliphatic alcohols and hydrolysis of
lipids) – biosynthesis of the mycelium-bound enzyme is induced using selected esters, -
selection of porous carriers (pore size, shape and dimensions of the porous carrier) useful for
the immobilization of Mucor strains and checking the usefulness of the immobilized lipase
preparations in selected manufacturing processes; - optimization of culture medium
composition, and agitation and aeration modes, - development of methods of preparation and
standardization of lipase preparations (conditions of mycelium de-fatting and de-hydration)
Thermostability properties of a xylanase XynA from Caldicellulosiruptor sp. F32: important
influence of carbohydrate binding module and non-regular region amino acids
Fuli Li*, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of
Sciences
Xylanase is one of the key enzymes in the degradation of lignocellulosic biomass. We described
here the characteristics of xylanase XynA from extremely thermophilic anaerobic bacterium
Caldicellulosiruptor sp. F32 and its thermostability properties. XynA wild type protein WT has a
specific activity at 2601 U/mg when using beechwood xylan as enzymatic substrate, with the
optimal temperature at 75 °C and pH 6.0. Truncation mutant protein TM1 without
carbohydrate binding module (CBM) exhibited a great improvement in the specific activity
(215.8 U/nmol vs. 94.7 U/nmol) and thermal stability (t1/2 of 48 h vs. 5.5 h at 75 °C) compared
with WT. Site-directed mutagenesis at N-terminal amino acids located in non-regular region
were carried out. The residual activity of mutated protein TM1AA2,3TS is 76 % after heat
treatment at 75 °C for 48 h, while protein TM1 only have 50 %. The thermal stability of XynA
and its mutanted proteins were consistent with its melting temperature (Tm) investigated using
differential scanning calorimetry (DSC). Hydrolysis products from beechwood xylan catalysed by
WT were mainly composed by cellobiose to cellopentose. These results demonstrated that
XynA is a thermostable xylanase with high catalytic stability, meanwhile, CBM and non-regular
region amino acids are critical for the thermostability of the protein which make XynA an
interesting enzyme for biotechnological application.
*Additional authors: Dongdong Meng, Yu Ying, Xiaohua Chen
Specialty Chemicals, Pharma Intermediates, Food Ingredients
Antiparasite Activity of Chitosan Prepared from Shrimp Shell Waste
Rym Salah-Tazdait, Mouloud Mammeri University of Tizi-Ouzou, Algeria
Chitin is found especially in the structure of the shell of crustacean, cuticles of insects and cell
walls of fungi. The waste of this natural polymer is a major source of surface pollution in coastal
areas. Chitosan is obtained by the thermochemical deacetylation of chitin. It has been proved
to be biologically renewable, biodegradable, biocompatible, non-antigenic, non-toxic and
biofunctional. In the present study, chitin was chemically extracted from shrimp shells. The
obtained chitin was deacetyled by NaOH to prepare chitosan. Then, chitin and chitosan were
characterized. Further, antiparasite activity of chitosan was evaluated using Leishmania
infantum LIPA 137 and Leishmania infantum LIPA 155/10, two reference strains isolated from
patients in Pasteur institute from Algeria. The results showed effective antileishmanial activity
of against Leishmania infantum LIPA 137, but no antileishmanial activity of chitosan against
Leishmania infantum LIPA 155/10. It was also demonstrate that Leishmania infantum LIPA
155/10 is resistant to leishmaniasis drug glucantime® and Leishmania infantum LIPA 137 is
sensitive to glucantime®. Further studies are necessary to determine the in vivo activities and
applications of chitin and derivatives, in particular, in the design of new lines of drugs for use in
the treatment of leishmaniasis and hopefully eradication. Keywords: antiparasite, chitin,
chitosan, Leishmania infantum, leishmaniasis, waste.
Immobilization of tomato (Lycopersicon esculentum) pectinmethylesterase in calcium alginate
beads and its application in fruit juice clarification
Pushpa Bogra, Seth Jai Parkash Mukand Lal Institute of Engineeri
Clarity of fruit juices is desirable to maintain an aesthetically pleasing quality and international
standards. The most commonly used enzymes in juice industries are pectinases. A partially-
purified pectinmethylesterase from tomato was entrapped in calcium alginate beads and used
for juice clarification. The activity yield was maximum at 1 % (w/v) CaCl2 and 2.5 % (w/v)
alginate. The immobilized enzyme retained ~ 55 % of its initial activity (5.68 x10-2 units) after
more than ten successive batch reactions. The K??m, pH and temperature optima were
increased after immobilization. The most effective clarification of fruit juice (% T620 ~ 60 %) by
immobilized enzyme was at 4 °C with a holding time of 20 min. A viscosity drop of 56 % and an
increase of 264 % in filterability were observed. The juice remains clear after two months of
storage at 4 °C.
Construction of reductive pathway in Saccharomyces cerevisiae for effective succinic acid
fermentation at low pH value
Jianmin Xing, Institute of Process Engineering, Chinese Academy of Sciences
Succinic acid is an important precursor for the synthesis of high-value-added products.
Saccharomyces cerevisiae is a suitable platform for succinic acid production because of its high
tolerance towards acidity. In this study, a modified pathway for succinate production was
established and investigated in S. cerevisiae. The engineered strain could produce up to 6.17 ±
0.34 g/L of succinate through the constructed pathway. The succinate titer was further
improved to 8.09 ± 0.28 g/L by the deletion of GPD1 and even higher to 9.98 ± 0.23 g/L with a
yield of 0.32 mol/mol glucose through regulation of biotin and urea levels. Under optimal
supplemental CO2 conditions in a bioreactor, the engineered strain produced 12.97 ± 0.42 g/L
succinate with a yield of 0.21 mol/mol glucose at pH 3.8. These results demonstrated that the
proposed engineering strategy was efficient for succinic acid production at low pH value.
Scale up of chito-oligomer production via bacterial fermentation
Hendrik Waegeman, Bio Base Europe Pilot Plant
Chito-oligomers constitute an interesting class of specialty carbohydrates, among other
applications used in plant protection and wound healing products. Today’s commercially
available chitosans are produced chemically from chitin isolated from shrimp shell wastes. They
can be well defined concerning their degree of polymerisation and degree of acetylation, but
they are invariably characterised by a random pattern of acetylation (PA), despite this
influences the activity greatly.
Synthetic Biology and Genomics Research
Accelerating Microbial Metabolism by Controlling Redox Potential during Fermentation
Process
Yanping Zhang*, Institute of Microbiology, Chinese Academy of Sciences
Many important biochemical reactions are catalyzed by reductases or dehydrogenases, whose
activities are dependent on the availability of NADH and the ratio of NADH to NAD+. In a
previous study, we found that the intracellular NADH/NAD+ ratio was sensitive to the level of
extracellular redox potential (also named oxidoreductive potential, ORP). To investigate the
mechanism of ORP control, we applied comparative proteomic analysis and genomic-level
metabolic flux analysis. Using Klebsiella oxytoca as a model, we found that the proteomic
profiling was changed in response to the extracellular ORP level. Furthermore, we found that
the metabolic flux via pyruvate dehydrogenase increased significantly under low-ORP condition.
It might result in increased availability of NADH. The combined analyses revealed the
relationship between ORP control and metabolism alteration. Controlling redox potential
during the anaerobic and micro-aerobic fermentation processes was shown an efficient
strategy to accelerate microbial metabolism. It has successfully impoved the fermentative
production of 1,3-propanediol by Klebsiella oxytoca, butanol by Clostridium acetobutylicum,
and increased the biomass yields of Lactobacillus and Bifidobacterium.
*Additional authors: Yan Zhu, Dan Li, Shaohua Wang, Tianrui Zhang, Chenyu Du, Zhu'an Cao, Yin
Li
Growing Global Markets
Patenting Innovation in Industrial Biotechology
Michael Harlin, Neal, Gerber & Eisenberg
Industrial biotechnology is fueling one of the greatest booms in global innovation in all of
history. Innovation lies at the heart of every new company and new initiative in the field. Those
innovations, and the investment and creativity that goes into them, can be protected by
patents in the US and throughout the world -- at least in most cases. However, there are some
discoveries that are not eligible for patenting, and premature disclosures of inventions can
damage or destroy the opportunity to patent those inventions. Different countries have
different standards when it comes to evaluating the inventiveness of an innovation and
whether it merits a patent. Business people, scientists, attorneys, and all involved in the
innovative process need to have some understanding of the patent laws of the US, along with
similarities to and differences from the patent systems in Europe, China and other major
markets. This paper and presentation will educate attendees about patenting innovations in
industrial biotech throughout the world.
Academic Research Presentations
A novel perfusion system for enhanced therapeutic protein production from mammalian cells
Pradip Roychoudhury, Indian Institute of Technology, Delhi
The demand for therapeutic proteins has been increasing at a pace faster than that at which
the new production technologies are being developed. Among the various production
technologies presently being used, perfusion culture technology is prefered over others
because it enables selective cell retention for achieving high cell density and consistent product
quality. In addition, it improves productivity and the economic outlook of the process.
However, there is scope for improving perfusion technology to achieve higher protein
production as the existing cell retention modules are prone to clogging during long term
operations. Considering this, we developed a novel spinfilter module using a silk membrane
possessing superior cell retention properties. With this module, we achieved higher viable cell
retention and lesser fouling compared to stainless steel modules that are normally used for
such processes. It was possible to operate the perfusion culture of hybridoma cells (HB8696) for
monoclonal antibody production uninterrupted for more than 200 h with the silk spinfilter. A
performance comparison of silk spinfilter with the stainless steel spinfilter showed a 57.4%
increase in monoclonal antibody production. The spinfilter module is suitable for perfusion
culture of both adherent and non-adherent mammalian cells.
Biopolymers Production by Xanthomonas campestris PV campestris From Glicerine, by-
products of biodiesel production
Francisca Pessoa de França, Universidade Federal do Rio de Janeiro
The growing interest for biofuels makes to biodiesel a renewable alternative, biodiesel came to
supply part of the expectations of the energy segment, however, its production has increased in
recent years, generating as a consequence, large amounts of glycerol, the main by-product of
the biodiesel production process; Glycerol, can replace carbohydrates usually employed as a
source of carbon, in the cultivation and growth of some microorganisms for the production of
bio-products. The xanthan gum is an extracellular biopolimero consisting of glucose, mannose,
and glucuronic acid, high molecular weight anionic, capable of forming high-viscosity aqueous
solutions, produced by Xanthomonas campestris pv campestris, The biosurfactant are
compounds of microbial origin, produced extracellularly or as part of the cell membrane by
different microorganisms. This work aimed to evaluate the effect of substituting,
supplementing and potentiality of glycerol as carbon source on production of xanthan gum and
biosurfactante. The medium of production were composed of different concentrations of
glucose and glycerol (g / L) in 100 ml of mineral medium, as a carbon source, with stirring speed
of 180 rpm at 28° C for 96 hours, using the bacteria Xanthomonas campestris pv campestris.
The study was done using experimental planning 22 with 4 experimental conditions and 3
central points, in order to evaluate various components such as the gum production (g/L), and
the biosurfactant, that was evaluated through the index of emulsification and 24%. The study
demonstrated that the maximum production of gum (6.48 g/L) was at a concentration of 1.5%
1.5% glucose and glycerol. When the mineral medium had a low content of glucose, the gum
production was reduced, however, the formation of biosurfactant was relatively high with 55%
for emulsification index with an aviation kerosene. The observed results indicated a possible
application of the bacteria using waste by-products from biodiesel industry.
Acknowledgements: The aurhors are grateful to the Conselho Nacional de Desenvolvimento
Científico e Tecnológico ( CNPq) and to Centro de Pesquisas da Petobras (CENPES) for financial
supports.
Malathion Biodegredation: Evaluation of its use as phosphorous and sulphur sources
Djaber Tazdait, Mouloud Mammeri University of Tizi-Ouzou
Malathion S-[1, 2- di (ethoxycarbonyl) ethyl] dimethyl phosphorothiolothionate; CAS No 121-
75-5; C10 H19 O6 PS2] is one of the most widely used organophosphate insecticides throughout
the world. It is commonly used to control mosquitos and a variety of insects that attack fruits,
vegetables, landscaping plants and shrubs. Removal of this pesticide can be attained by
physical-chemical and biological processes. Several studies have examined the degradation of
malathion by microbes and most of these studies were carried out using pure cultures. Little
information is available concerning degradation of malathion by activated sludge culture. In
most studies of xenobiotic degradation in general, and malathion degradation in particular, the
compounds under consideration have been supplied to microorganisms exclusively as sources
of carbon. But their utilization as source of phosphorus and sulphur has been less well studied
until now. Therefore, in this study, the biodegradation of malathion using acclimated activated
sludge culture was achieved. The ability of mixed microbial community to use malathion as a
source of phosphorus and sulphur nutrition was also evaluated. The result showed the
potential for using local activated sludge for malathion biodegradation. On the other hand, the
acclimated activated sludge could use malathion as its sole phosphorus source but could not
use it as its sulphur source.
Microwave-assisted synthesis of n-butanol directly from bioethanol using bulk MgO
Dr. Idan Chiyanzu, North West University
Bio-butanol is an attractive alternative drop-in fuel as replacement for fossil-based petroleum
in internal combustion engines. The application of bulk magnesium oxide (MgO) catalyst for n-
butanol production was investigated in this study. The phase purity of the catalyst was
confirmed by X-ray diffraction (XRD). Transmission Electron Microscope (TEM) was used to
observe the morphology and size of the catalyst. Nitrogen adsorption and CO2 desorption using
Brunauer-Emmet-Teller (BET) analysis were done to confirm the surface area of nanoparticles
of the MgO. Thermogravimetric analysis (TGA) provided insight into the decomposition process
of the catalyst at different temperatures. The effect of the catalyst on n-butanol yield was
studied by varying the mass loading (0.1-0.5 g), and the microwave temperature (50-250oC).
The average particle diameter for MgO ranged between 50-200 nm. The MgO surface area
obtained from BET studies was found to 44 m2/g. Ultimately, the microwave method was
compared to n-butanol production using a hot plate thermostat at different temperatures (50-
250oC). The study will highlight the effect of different amounts of MgO as a catalyst on
microwave-assisted butanol productivity from bioethanol. Keywords: Bulk MgO, Microwave, n-
butanol
Aerobic methane-oxidizing communities in saline alkaline and arable soils
Nancy Serrano Silva, Centro de Investigación y de Estudios Avanzados del Instituto Politécnico
Nacional, México
The former lake of Texcoco is located in the Valley of Mexico City (Mexico). This is a unique and
extreme soil, highly saline-sodic, with electrolytic conductivity (EC) up to 150 dS m–1 and pH up
to 10.5. The composition of aerobic methane-oxidizing bacteria (MOB) communities was
studied in three soils from the former lake Texcoco (Mexico) and compared to that in two
arable soils. The MOB were identified on the basis of comparative sequence analysis of the
pmoA gene, that encodes for a subunit of the particulate methane monooxygenase, a key
enzyme in the aerobic methane oxidation process. The sequences from the arable soils
belonged to type I and II methanotrophs. The clones were closely related to JR-2, JR-3, USC-?
and USC-a clusters, that have previously been detected in upland soils. In the saline alkaline
soils, a novel group of sequences related to the Nitrosococcus-like clade was detected (> 92% of
clones sequenced). These data indicated that the methanotrophic communities in the soil from
the former lake Texcoco differed from those in arable soils and further experiments are needed
to confirm that the methanotrophic community found in Texcoco soils oxidizes methane under
adverse conditions.
Biomass as a source of feedstocks for the preparation of environmentally friendly polymer
materials
Gabriela Dziworska, Lodz University of Technology, Lodz, Poland
This poster presentation contains the main ideas of the POIG project BIOMASA partially
financed by the European Union within the European Regional Development Fund. The aim of
the project is utilization of various kinds of plant biomass and textile waste materials by their
transformation with biotechnological methods, involving either enzymatic or microbial
processes, into fibrous polymer materials. Cellulose nanofibres For the preparation of cellulose
nanofibres, a cellulose-rich plant biomass is being utilized, including grass and straw of various
cereals as well as waste fibres from textile industry (cotton, linen). The biomass is first
pretreated with physical and/or chemical methods including boiling, steam-explosion or
treatment with certain chemicals. Multienzyme complex obtained from Aspergillus niger mould
is utilized as the main enzymatic tool. The fibrous materials and composites prepared within
this project on the basis of abovementioned intermediates will be further utilized for obtaining
new functional textiles and nonwovens with potential sanitary or technical applications, such as
sweat-absorbing textile inserts, sanitary textiles, filtration materials, geotextiles and
agrotextiles. Within this project, the processes of ageing and controlled biodegradation of
prepared materials will be studied, as well as the conditions of their recycling and possible use
of degradation products in agriculture. Tactic polylactide The synthesis of tactic polylactide is
being performed by chemical polymerization of L,L-lactide, prepared from L-lactic acid. The
latter is obtained by stereoselective fermentation of plant biomass, after its saccharization by
appropriate enzymes (Aspergillus niger preparations). The microorganisms (bacteria), used for
the fermentation, were selected by classical microbiology methods from the environment. In
this case patatoes, cereal grains or beet pulp are employed as starting biomass. The tactic
polylactide will be further utilized for fiber formation and thermoforming. Co-polyesters The
third path involves utilization of various oil-plant biomass, which on sequential treatment with
lipase preparations obtained from Mucor circinelloides and Mucor racemosus moulds
(transesterification with 2-methylbutanol) and dimerization of obtained esters (cycloaddition)
are transformed into dimeric esters containing fatty acid residues. These will be co-polymerized
with appropriate reagents in order to produce new biodegradable aliphatic-aromatic co-
polyesters. The polyesters will be utilized as fillers for the preparation of various fibrous
polymers and composites. Concluding remarks The project is being realized by Polish
Consortium with the Lodz University of Technology being the leader. The methods of
preparation of polymer fibrous materials and composites elaborated within this project will
positively influence development of knowledge-based economy and will increase the
innovativeness of connected areas of research and production. The main recipients of
elaborated methods will be producers of fibers and nonwovens from thermoplastic materials,
sanitary textiles, filtration materials, geotextiles, agrotextiles and packing materials.
Acknowledgment The Project (POIG 01.01.02-10-123/09) is partially financed by the European
Union within the European Regional Development Fund.
Effect of Metabolic Regulators in the Production of Alpha-Amylase by Aspergillus sp. Using
Lignocellulosic Substrate for Potential Industrial Applications
Dr. Shalini Singh, Lovely Professional Universit, Punjab, India
The concerned paper talks about the influence of antibiotics on production of alpha-amylase by
Aspergillus fumigatus NTCC1222, Enzymes-the biocatalysts, have changed the definition of
industrial growth and development by envisaging the features of ‘environment friendliness’ and
‘cost-effectiveness’ to conventional chemical based products and processes. Government
regulations and public awareness have shifted the focus of researchers worldwide to develop
products and processes that offer environment friendly alternatives to already existing
chemical processes. Thus, large scale production of enzymes an area of major interest for
researchers. Since biotechnological applications require large amounts of low cost enzymes,
one of the appropriate approaches is the search for powerful enzyme producers and the
utilization of the potential of lignocellulosic wastes/by-products, which may contain significant
concentrations of soluble carbohydrates and inducers of enzyme synthesis, ensuring efficient
production of various enzymes. Alpha-amylase is one of the most important industrial enzymes
with numerous industrial applications and its production is influenced by a number of factors
including, metabolic regulators. In the current study, the influence of antibiotics on alpha-
amylase production by indigenously isolated fungal strain Aspergillus fumigatus NTCC1222,
under solid state fermentation conditions using cheap, readily available lignocellulosic substrate
(wheat bran), was studied. The fermentation medium was supplemented with variable
concentrations of antibiotics (streptomycin, tetracycline and chloramphenicol) and the amylase
activity of same was compared with unsupplemented fermentation medium. Simultaneously,
the effect of antibiotics on fungal growth was also monitored. Amylase activity was found to
improve for streptomycin-supplemented fermentation medium at a concentration of 80µg/mL
while it decreased at other concentrations used. On the contrary, tetracycline and
chloramphenicol decreased the amylase activity as compared to unsupplemented fermentation
at all concentrations used. Interestingly, the growth of the test fungus improved in the
presence of streptomycin at all concentrations, improved at 80 (+28.43%) and 100 (+17.73%)
µg/mL of tetracycline but decreased in the presence of chloramphenicol at all concentrations
used, as compared to unsupplemented fermentation medium. The study signifies the influence
of antibiotics on fungal amylase production and fungal growth in the presence of cheap
substrate as the carbon source.
A novel perfusion system for enhanced therapeutic protein production from mammalian cells
Prof.P.K.Roychoudhury, Indian Institute of Technology
The demand for therapeutic proteins has been increasing at a pace faster than that at which
the new production technologies are being developed. Among the various production
technologies presently being used, perfusion culture technology is prefered over others
because it enables selective cell retention for achieving high cell density and consistent product
quality. In addition, it improves productivity and the economic outlook of the process.
However, there is scope for improving perfusion technology to achieve higher protein
production as the existing cell retention modules are prone to clogging during long term
operations. Considering this, we developed a novel spinfilter module using a silk membrane
possessing superior cell retention properties. With this module, we achieved higher viable cell
retention and lesser fouling compared to stainless steel modules that are normally used for
such processes. It was possible to operate the perfusion culture of hybridoma cells (HB8696) for
monoclonal antibody production uninterrupted for more than 200 h with the silk spinfilter. A
performance comparison of silk spinfilter with the stainless steel spinfilter showed a 57.4%
increase in monoclonal antibody production. The spinfilter module is suitable for perfusion
culture of both adherent and non-adherent mammalian cells.
Production of lactic acid production in a novel fermentation and separation integration
system
Xuerong Xing, Tianjin Institute of Industrial Biotechnology, Chinese Academy of Sciences
Lactic acid is an important platform chemical. A novel lactic acid fermentation and separation
integration system which combines microbe fermentation, cross flow microfiltration and
product adsorption processes was set up in this study. The novel approach can overcome
product inhibitory and enhance cell growth period from 41 h to 120 h. The final improved lactic
acid production increased 1.26-fold, up to the final titers of 183.4 g/l with an overall yield of
0.97 g/g glucose and 1.53 g/l/h productivity. The experimental results indicated that the system
could be economically viable for continuous production of lactic acid at high level.
A presentation on biobased economy applications in the eu and in taiwan on waste
microalgae culture with biofuels production study.
Renee Yuan, Tamkang University
Facing limited resources on Earth against sustainable development of our economy, the
perception in the EU of high technologies role for our future generations has been polarized
due the very fast developments of creative and innovative systems to find viable transition
within two decades. Biotechnologies progress shows promising potential to reduce C, Waste
excess, Global warming risks, and grow this new Sector of economy. Biotechnological
conversion from Biomass into agro-foods, nutraceuticals, industrial chemicals, bio energies
forms a primary resource in terms of entropy could reverse situations for present threats:
environmental, climatic, social and economic. It will change the way we live and work if
potential for sustainable production and conversion of biological material is fully exploited and
evaluated to address to long term visions – arable and livestock farming, forestry, food,
aquaculture, chemical industry, materials manufacturing and energy supply. Further will assess
a Microalgae production techniques from waste water of biofuels .“The study of Bioenergies
production from Microalgae culture on wastewater”. TW sewage treatment ( nitrogen,
phosphor, organic carbon, GHG, conversion into feedstock biodiesel, coproducts,high lipid
content & growth microalgae) associated to power plant emissions & production controls. The
race for 3rd generation biofuels industrialization engage closer assessment of changes &
choices to happen during process and their side effects.
Acetylation of Corn Cob Hemicellullose in the Presence of Potassium Acetate Salt to Reduce
Their Water Sensitivity
Merve Akkus, Middle East Technical University
Sustainable sources of materials are much needed at present as the fossil fuels are being
depleted and lignocellulosic biomass has become the main focus of the developing bio-refining
industry. Many lignocellulosic biomass studies have been focused on ethanol production from
cellulose; however co-utilization of lignin, hemicellulose and cellulose is necessary from the
point of a realistic application. In particular, the use of lignocellulosic biomass for the
production of food packaging has recently received interest due to the ecological problems of
the petroleum based packaging materials. One of the main obstacles in the application of
hemicelluloses for packing is their inherent hydrophilic nature. This hydrophilicity makes
biopolymer films sensitive to water which affects their functionality negatively limiting their
usage. Acetylation, which is a widely used technique for the modification of cellulose and
starch, can be used analogously for the hydrophobic modification of hemicellulose. A classic
procedure involves the acetylation with acidic or basic catalysts like sulfuric acid and pyridine.
In this study, the effect of potassium acetate salt on the acetylation of hemicellulose was
investigated without the use of any catalyst. Hemicellulose was alkaline extracted from an
agricultural waste, corn cob. Potassium acetate salt was formed by the neutralization of
potassium hydroxide with acetic acid during alkaline extraction. It is a common step to remove
these salts from the structure by a desalting step like washing or dialysis but for this study,
desalting step was excluded and salted hemicellulose polymers were obtained. Hemicellulose
polymers were reacted with acetic anhydride at different temperatures for various reaction
periods. It was found that, water solubility of salted hemicellulose was reduced by 50% after
acetylation at 120oC for 30 minutes whereas the reduction was only about 2% for the reference
sample (acetylated desalted hemicellulose). When conditioned in 90% relative humidity for 24
hours, salted hemicellulose polymers absorbed nearly %60 less moisture than their reference
counterparts. ATR-FTIR analysis also verified the acetylation reaction and hydrophobic
modification of corn cob hemicellulose was achieved by a very simple acetylation reaction
without the use of any solvent or catalyst. By this way, it was also shown that better products
can be obtained without time consuming and costly desalting steps.
Lignin Valorization by Catalytic Depolymerization in Supercritical Ethanol
Tamas I. Koranyi, Department of Mechanical Engineering, Eindhoven University of Technology,
Eindhoven, The Netherlands
We developed novel chemistry for the second most abundant but least valorized biomass
component lignin and showed how it can be valorized into a number of useful chemicals and
fuel additives. Our strategy is to depolymerize lignin in ethanol, which can also be derived from
biomass, using a Cu-modified hydrotalcite as the catalyst. Significantly, we show that one-step
valorization of soda lignin in supercritical ethanol using CuMgAlOx catalyst results in high
monomer yield (23 wt%) of lignin products without coke formation. Aromatics are the main
components, almost half of this monomer fraction being free of oxygen. These BTX (Benzene-
Toluene-Xylene)-type streams have value as chemicals or may alternatively serve as fuel
additives to gasoline. The oxygenated fractions are highly alkylated and may be used as base
chemicals or as additives to increase the octane number of gasoline. Besides these promising
results in terms of lignin valorization, we show how the use of ethanol as a solvent results in
high monomer yield, deoxygenation and, importantly, protection of the monomers and
intermediates from repolymerization.
Colchicine Pathway N-Acetyltransferase: Identification, Cloning and Expression
Ganapathy Sivakumar, Arkansas Biosciences Institute, Arkansas State University
Gloriosa superba is a perennial climbing tropical plant for the production of colchicine, which
has potential antimitotic activity. Advanced colchicine-based enzyme and nanotechnology
could lead to the design of cancer therapeutics. In order to improve natural isomer raw
colchicine for drug production, understanding of the biosynthetic pathway genes is necessary.
We have identified the colchicine pathway final step’s likely candidate gene, N-
acetyltransferase (NAT) which catalyzes the acetyl transfer from acetyl-CoA deacetylcolchicine
to colchicine. We report the cDNA establishment from G. superba and identification of NAT
from the G. superba RNA transcriptome database. In addition, putative NAT open reading
frame cloning into three different Gateway destination vectors, pDEST-17, pBAD-DEST49 and
pDEST-HisMBP and the expression of the recombinant NAT in E. coli. This study not only
characterizes the colchicine pathway genes but also could provide new insights into elucidating
the colchicine metabolism in G. superba.
Technical Presentations
Enhanced Biofuels Production from Lignocellulosic Biomass by Microwave-assisted
Pretreatment
Wei Huang, BeijingResearch Institute for Nutritional Resource
Lignocellulosic biomass are not easily utilized by microorganisms due to their physical shielding
of cellulose imparted by the non-digestible lignin. Therefore, there is a great interest to develop
an efficient pretreatment technique to disrupt recalcitrant structures of lignocellulosic biomass
and improve renewable energy production. Microwave energy can efficiently penetrate plant
materials and produce a volumetrically distributed heat source, and the highly localized
temperature and pressure can cause serious destructive effect of cellulose structure, and
therefore enhance resolvability of lignocellulosic materials. Microwave irradiation has been
successfully integrated with alkali/acid pretreatment process to enhance enzymatic hydrolysis
of lignocellulosic biomass for ethanol fermentation and biogas production. The aim of this
poster is to identify the problems related to the microwave assisted pretreatment process with
emphasis placed on developing novel strategies for biogas production from lignocellulosic
biomass.
Conversion of various oils using lipolytic fungal biomass in non-water systems
Miroslawa Szczesna-Antczak, Institute of Biotechnology and Food Sciences, Lodz University of
Technology, Lodz, Poland
Bioeconomy has been one of most dynamically developing sectors of EU economy. Its basic
goal is the replacement of fossil fuels with biomass as a renewable source of valuable products
and/or feedstocks for industry. Foundation of the industry on natural resources and
bioprocesses is the prerequisite of sustainable development. Presented results were achieved
within the frames of a research project with an acronym: Biomass, entitled ”Application of
biomass in production of environmentally friendly polymer materials”, which has been realized
by a consortium of several research institutions in Poland: Lodz University of Technology,
Institute of Biopolymers and Chemical Fibers in Lodz, Centre of Molecular and Macromolecular
Studies of Polish Academy of Science, University of Agriculture in Krakow and Central Mining
Institute in Katowice. One of objectives of tasks 2.2 & 3.2 of this project is the development of a
chemo-enzymatic method of oleaginous biomass conversion into biodegradable components of
aliphatic-aromatic polymers for fabrication of agro-textiles. The team from the Institute of
Technical Biochemistry (ITB) LUT devised a biocatalyst, which is inexpensive and highly active in
non-aqueous systems (task 2.2), and optimized conditions of its effective usage in processes of
oil bioconversion (mainly rapeseed, sunflower, soybean and waste oils) into esters of aliphatic
primary alcohols (also branched) or structured SUS-type triacylglycerols (saturated-
unsaturated-saturated acid bound to glycerol) (task 3.2). The latter may be further converted
into dimers and macrodiols, which will be used in polymerization processes. Immobilized in
porous carriers, whole-cell (mycelial) preparations of intracellular lipases produced by
oleaginous and lipolytic fungal strains from the culture collection at ITB, which are robust and
highly active in non-aqueous systems, have been used to develop semi-continuous
transesterification processes, e.g. plant oil alcoholysis by 2-methylbutan-1-ol (or other medium-
chain alcohols) and acidolysis by saturated fatty acids (especially palmitic and stearic).
Operational stability of these biocatalysts in column PBR reactors (working volume of 0.2-0.5L)
either with petroleum ether used as a solvent (or without it), under suitable process (acidolysis
and alcoholysis) parameters reaches about half a year (or more) without any decrease in
bioconversion yield. Identification of crucial parameters deciding of transesterification
processes efficiency and high stability of the biocatalyst guarantees the successful up-scaling of
these processes. Keywords: bioconversion, alcoholysis, acidolysis, whole-cell lipase preparation,
high operational stability Acknowledgement The project BIOMASA (POIG 01.01.02-10-123/09)
is co-financed by the European Union within the European Regional Development Fund (in the
frames of Operation Program Innovative Economy 2007-2014).
Investigation of yeast performances in the fermentation of first generation feedstocks
Rishi Jain, Praj Matrix – The Innovation Center
Usage of first generation feedstocks such as cereals and molasses is a source of potable ethanol
and currently is also being sourced as fuel ethanol. Starch from grains such as cassava, corn,
sorghum, sweet potato and wheat is the source of sugars that is fermented to ethanol.
Molasses is the non-crystallizable residue left over after sucrose purification from sugarcane or
sugar beet juice. Unlike starch from grain feedstocks, the quality of molasses varies a lot
depending on the harvesting stage of the crop, amount of sugar extracted and the techniques
used to extract the sugar. The focus of this presentation will be on the challenges associated
with yeast performances in the fermentation of first generation feedstocks. Specific hurdles will
be laid out not only with respect to the composition of these feedstocks but also with respect
to the fermentation process parameters. A detailed review of research activities catering to
these specific problems will be discussed. Possible solutions from a strain development
perspective will be discussed that will combine classical methods as well as metabolic
engineering techniques.
A Dynamic Imaging Cell Monitoring System for Real-Time Analysis of Algae-to
Biofuel/Bioproduct Production
Victoria Kurtz, Fluid Imaging Technologies, Inc
This presentation will detail a novel new system (patent applied) for real-time analysis and
monitoring of algae production. The system uses in-flow digital imaging to capture images of all
representative cells or other microorganisms in photo bioreactors or raceway ponds.
Sophisticated image processing algorithms are used in real time to segment each
microorganism from the background, and record over 30 size, shape and gray-scale
measurements for each microorganism. Cell size and concentrations are produced in real-time,
and are used for trend analysis. This system can be hooked into any part of the production flow
loop for analysis at any point in the process. The system is Class I, Div. I compliant, and
automatically cooled to maintain proper working temperature on-site. Using a unique auto-
dilution system, the concentration is adjusted for optimum presentation of the microorganisms
to the imaging system. Since every particle image and its measurements are saved by the
system, it creates an ironclad audit trail for how data was recorded. Test data collected in the
field will be shown illustrating typical results from the system. A short video will show how the
system works in real-time, including how the particle images are acquired and measurements
made. Finally the results of the analysis will be shown, detailing how the system can be used to
monitor microorganism size and concentration, and in particular, identification of predators.