Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Contact:
Tel: +27 (0) 11 028 9498 +27 (0) 11 028 9499Fax: +27 (0) 86 543 7413Email: [email protected]: No. 2 Cnr. Charlie & Bravo Roads Jetpark, Boksburg South Africa
Training Centre: No. 2 Cnr. Charlie & Bravo Roads Jetpark, Boksburg South Africa
Western CapeTel +27 (0) 21 975 6635Mobile +27 (0) 83 257 0471
Eastern CapeTel +27 (0) 43 721 0149 Mobile +27 (0) 72 649 9914
Kwazulu NatalMobile +27 (0) 83 443 4148
Advantages of Vinyl Flooring
Water resistance
sOUnDPrOOFstain resistan
ce
cOst eFFectiVe
easY tO cLean
sLiP resistant
DUraBLe & resistant
resiDentiaL & cOM
M
erciaL
ecO-FrienDLY
FLOatinG sYsteM
HYGienic
saWFLa aPPrOVeD
MiniMaL Maintenance
riGiD DUraBLe BacKinG sYsteM
Completed Projects
retaiLHeaLtHcare HOsPitaLitY Fitness
eDUcatiOn cOrPOraterestaUrants
Bohemian Pine
Winter Oak
Golden Oak
Oaked Grey
Ice Age
Peacon Oak
SuperiorGlue Down Vinyl Flooring2mm / 0.3mmPlank size: 1532mm x 236.6mm
EchoWood Superior Glue Down Vinyl flooring requires self-levelling screed and a glue application for a permanent installation. The vinyl plank flooring is durable and moisture resistant, it can go anywhere.
10 Year WarrantyResidential Use
Plank size: 1532mm x 236.6mmM2 per box: 4.35m2 per boxWarranty/application: 10 Year Residential UseWeight per box: 19kg’s per boxtotal planks per box: 12 pieces
important info: Only Wanabiwood Specified and recommended glue to be used.QualiChem QAR179A | ITE Glue V50Product must acclimatise for 24 to 48 hours prior to installation.Moisture level must be 3% and below.
UV CoatingClear Wear LayerPrint SheetBalance Layer
Base Layer
Technical Drawing 2mm/0.3mm
Specifications
Superior Glue Down
Technical Specifications Standard Characteristic / Result
Slip Resistance EN 13893 DIN 51130ASTM C-1028
Class DS R9 Dry: 0.8Wet: 0.69
Water resistance ASTM D3389-15 Type of wheels: H -18Vertical force used: 1000gRevolution: 1000rMass los: 128mgWear Index: 0.128
Static Load ASTM F-970 -07 (R2011) 0.02mm
Resistance to Light EN ISO 105-B02 ASTM F-1515-13
≦ 6E* = 0.73
Dimensional Stability EN434 ASTM F 2199- 09
≦0.1% -0.16mm/179mm
Resistance to impact ASTMF 1265 No Crack
Residual indentation EN433 ASTM F 1914-11
≦0.05mm<5%
Abrasion resistance EN 660 - 2 ASTM 3389
Group TPassWear index: 0.128
Resistance to heat ASTM F 1514 - 13 E=0.19
Reaction to fire EN 13501 - 1 ASTM E-648-06
Bft - S1 Class 1
Smoke density ASTM E662 Pass
Chemical resistance ASTM F925 - 13 PassNo more than a slight change in surface dulling, surface attack or staining
Castor chair suitability EN 425 NALFA/ ANSI LF -11
PassNo visible damage after 35000 revolution
Underfloor heating Suitable, max 27°C
VOC emissions FloorScore DIBT
CertifiedCertified
RESIDENTIAL USE
Earth Stone Nyati Pine
Smoked Pine
Lime Stone
Pistachio Walnut Pine
Natural Oak
River Sand
ClassicGlue Down Vinyl Flooring2.5mm / 0.5mmPlank size: 1219.3mm x 228.6mmMicro bevel edge
Our new Classic Vinyl range, which is not only durable and moisture resistant, but also the most affordable vinyl based on spec in the market.
20 Year WarrantyCommercial & Residential Use
Technical Specifications Standard Characteristic / Result
Wear Resistance EN660-2: 1999+ FV=1.4mm3
A1: 2003EN6492011
Slip Resistance EN 13893 DIN 51130:2010
Class DS R10
Resistance to Light ISO 105-802:1994 /Amd1: 1998+Amd 2: 2000
Grade 6
Dimensional Stability ASTM F1700-13a ASTM F2199-09 Re-approved 2014
long side: 0.09%short side: 0.05% Pass
Residual Indentation ASTM F1700-13a ASTM F 1914-07 Re-approved 2014
<8% Pass
Abrasion Resistance EN 13329:2006 /A1.2006
7000 Cycles Abrasion Class: >AC5
Fire Resistance EN 9239-1 EN ISO 11925-2 EN 13501-1
Bft - S1
Chemical Resistance ASTM F1700-13a ASTM F925 - 13
Pass
Castor Chair Test EN 425: 2002 No visible damage
TVOC Emission Factor ISO 16000 Parts -3, -6, -9, -11
A+
Emission of Formaldehyde
EN7171-1:2004 Not Detected
Plank size: 1219.3mm x 228.6mmM2 per box: 4.46m2Warranty/ application: 20 years residential and 20 years commercialWeight per box: 19kg’stotal planks per box: 16 piecesMicro bevel edge
important info: Only Wanabiwood Specified and recommended glue to be used.QualiChem QAR179A | ITE Glue V50Product must acclimatise for 24 to 48 hours prior to installation.Moisture level must be 3% and below.
2.5mm/0.5mmClassicTechnical Drawing
Specifications
UV CoatingClear Wear LayerPrint SheetBalance Layer
Base Layer
RESIDENTIAL USE
African Oak Oaked Grey
Tahiti Pine
Aged Oak
Sandstone Winter Oak
Beach Sand
Summer Pine
SmartCoreRigid WPC Click Vinyl Flooring5.5mm / 0.5mmPlank size: 1220mm x 228mm
SmartCore Rigid WPC Click supported by our unique wood plastic composite engineered backing with lime stone for extra stability is ideal for all our climates.
20 Year Warranty – Residential Use10 Year Warranty – Light Commercial Use
Technical Specifications Standard Characteristic / Result
Slip resistance EN 13893 DIN 51130 ASTM C- 1028
Class DS R9 Dry: 0.87 Wet: 0.69
Wear resistance ASTM D4060-14 Type of wheels: CS-17 Vertical force used: 1000g Revolution: 1000rMass loss: 128mg Wear index: 0.125
Static load ASTM F-970-07 (R2011) 0.01mm
Resistance to light EN ISO 105- B02 ASTM F-1515-13
≧6 E*=1.61
Dimensional stability EN434 ASTM F 2199-09
≧0.1% -0.37/178mm
Resistance to impact ASTMF 1265 -03 (R2013) No crack
Residual indentation EN433 ASTM F 1914-11
≧0.05mm<4%
Abrasion resistance EN 660-2 ASTM 3389 Group T
Pass Wear index: 0.128
Resistance to heat ASTM F 1514-13 E =0.34
Reaction to fire EN 13501-1 ASTM E-648-06
Bft -S1 Class 1
Smoke density ASTM E662 Pass
Chemical resistance ASTM F925-13 Pass, no more than a slight change in surface dulling, surface attack or staining
Castor chair suitability EN 425 NALFA/ANSI LF-11
Pass, no visible damage after 25000 revolution
VOC emissions FloorScore DIBT
Certified Certified
Plank size: 1220mm x 228mmM2 per box: 1.95 m2Warranty/ application: 20 years residential and 10 years commercialWeight per box: 14.5kg’stotal planks per box: 7 pieces
important info: Expansion gap of 8mm all round.Floor must not be pinned.Product must acclimatise for 24 to 48 hours prior to installation.Moisture level must be 3% and below.Only 2mm /3mm Rubber acoustic underlay to be used.
5.5mm/ 0.5mmSmartCoreTechnical Drawing
Specifications
RESIDENTIAL USE
Ash Grain Cloud Nine
Savana Grain
Dove Grey
Whisper Oak
ElegantLaminate Flooring AC4 U Groove / V GroovePlank size: 1215mm x 167mm
Elegant Laminated flooring 20 years residential and commercial warranty. The overlay is superior abrasion hesitant, heat resistant and fire retardant. The decor paper is ultraviolet radiation resistant; it is made from wood and plant fiber with moisture protection balance backing.
20 Year WarrantyCommercial & Residential Use
Technical Specifications Standard Characteristic / Result
Anti-sliding EN 13893:2003 Class DS
Thickness Swelling NALFA / ANSI LF-01-2011 12.50%
Clean-Ability/ Stain Resistance NALFA / ANSI LF-01-2011 No effect
Surface Bond NALFA / ANSI LF-01-2011 1.46 N/mm²
Abrasion Resistance NALFA / ANSI LF-01-2011 AC4
Large Ball Impact Resistance NALFA / ANSI LF-01-2011 1225mm No Crack
Castor Chair Resistance NALFA / ANSI LF-01-2011 No Effect
Formaldehyde Emission NALFA / ANSI LF-01-2011 0.18 mg/L
Plank size: U- Groove 1215mm x 167mm / V-Groove 1215mm x 195mmM2 per box: U- Groove 1.63m2 / V-Groove 1.90m2Warranty/application: 20 years residential and 20 years commercialWeight per box: 14.5kg’stotal planks per box: 8 pieces
important info: Expansion gap of 8mm all round. Floor must not be pinned.Product must acclimatise for 24 to 48 hoursprior to installation.Moisture level must be 3% and below.Only rubber acoustic underlay to be used.
Technical Drawing 8.3mm - AC4Laminates
• ac4 - commercial Grade• Board 8.3mm• eir surface• Waxonsurface&profiles
Value Added Services and included Benefits of Underlay
Specifications:Product description: Rubber acoustic underlayThickness: 2mmSize: 1m x 20mWeight per roll: 14kg’s
Specifications:Product description: Rubber acoustic underlayThickness: 3mmSize: 1m x 20mWeight per roll: 23.1kg’s
• acoustics absorption• Moisture barrier• Helps with dimension• cost saving – can be installed over existing tiles – no surface prep necessary.
Specifications DENSITY > 900KG/M
3
We Have Experience
WanabiWood is a dynamic, innovative and personalised wholesale company specialising in sustainable flooring. Established in 2009 with national as well as international distribution.
With stock available in various regions within South Africa, we are proud to say that we are a leading supplier offering superior quality products with warranties up to 20 years.
We Deliver Flooring
As a member of the South African Wood, Laminate and Flooring Association (SAWLFA), we deliver flooring that captures beauty, healthy living and elegance of natural looking wood without impacting on the sustainability of our living forests.
All our vinyl product ranges are made from 100% virgin material with tests conducted in SA to ensure that there are no harmful substances in our products.
Premium Suppliers
We take great pride as a premium supplier and importer of sustainable flooring solutions to both residential and commercial environments, nationally and internationally.
Offering over 10 product ranges on glue LVT’s as well as WPC systems.
Our Expertise
We have a driven and passionate team that are committed in assisting you with all your flooring needs. Our head office is situated in Gauteng, South Africa, with expert sales agents available nationally and internationally.
Our Innovation
We research, discuss trends, design, test and produce products within the flooring industry that offer beautiful results with as little impact on the environment as possible. Important factors we always consider in the development process include: Eco-friendly, sustainability, quality, technical performance, durability, affordability, easy installation, practicality, warmth, comfort, water resistance, slip resistance and hygiene.
Our Values
We are committed to the environment, sustainability, our customers, delivery and our passion for a perfect flooring solution in all environments no matter how large or small.
Wanabiwood uses an independent entity that sub-contract out Inspection & Testing services to International Flooring Labs for all our Classic Vinyl and Laminate shipments. Assuring Quality Consistency. Since 2001, IFL has focused on upholding flooring industry quality standards ,improving manufacturing practices and delivering peace of mind to clients worldwide.
Guarantees that its 0.5 mm abrasion resistance layer Vinyl Dry Back Plank shall:
1. For a period of 15 years from a date of purchase, remain free from manufacturing defects and will not wear through or permanently stain in normal household usage conditions.
2. For a period of 10 years from the date of purchase, remain free from manufacturing defects and will not wear through or permanently stain in normal commercial usage conditions.
Guarantees that its 0.3 mm abrasion resistance layer Vinyl Dry Back Plank shall:
3. For a period of 10 years from a date of purchase, remain free from manufacturing defects and will not wear through or permanently stain in normal household usage conditions.
4. For a period of 6 years from the date of purchase, remain free from manufacturing defects and will not wear through or permanently stain in normal commercial usage conditions.
Contact:
Tel: +27 (0) 11 028 9498 +27 (0) 11 028 9499Fax: +27 (0) 86 543 7413Email: [email protected]: No. 2 Cnr. Charlie & Bravo Roads Jetpark, Boksburg South Africa
Training Centre: No. 2 Cnr. Charlie & Bravo Roads Jetpark, Boksburg South Africa
Western CapeTel +27 (0) 21 975 6635Mobile +27 (0) 83 257 0471
Eastern CapeTel +27 (0) 43 721 0149 Mobile +27 (0) 72 649 9914
Kwazulu NatalMobile +27 (0) 83 443 4148