Richard D. Hale

Richard D. Hale

1530 W.15th Street

2120 Learned HallLawrence, KS 66045-2221

(785) 864-2949

(785) 864-3597 FAX rhale@ku.edu

www.engr.ku.edu/~rhale

INTERESTS

Composite materials and structures, unmanned air vehicles, experimental stress analysis, solid mechanics, nondestructive evaluation techniques, multidisciplinary design optimization, knowledge based systems and engineering education.

EDUCATION

Iowa State University, Ames, IA

Ph.D., Engineering Mechanics, December 1995

Emphasis: Solid Mechanics/Composite Materials

Washington University, St. Louis, MO

M.S., Mechanical Engineering, May 1991

Emphasis: Solid Mechanics/Composite Materials

Iowa State University, Ames, IA

B.S., Aerospace Engineering, December 1988

Emphasis: Aircraft Structures

HONORS

· NASA Group Achievement Award, 2011

· John and Winifred Sharp Teaching Professorship, 2007-2010

· Henry E. Gould Award for Distinguished Service to Undergraduate Education, 2005.

· William T. Kemper Fellowship for Teaching Excellence, 2003

· Miller Professional Development Award for Distinguished Research in Engineering, 2003

· Henry E. Gould Award for Distinguished Service to Undergraduate Advising, 2003.

· Henry E. Gould Award for Distinguished Service to Undergraduate Education, 2002.

· Bellows Fellow, College of Engineering, University of Kansas, 2000-2001

· Aerospace Engineering Educator of the Year, 1999-2000; 2001-2002, 2003-2004, 2005-2006.

· Excellence in Teaching Award, Center for Teaching Excellence, 4 May, 2000; 9 May, 2002.

· Technical Contribution Award. American Institute of Aeronautics and Astronautics, St. Louis Section, 20 May, 1999.

· Iowa State University Research Excellence Award for Outstanding Graduate Research, December, 1995

· ISU Institute for Physical Research and Technology Fellowship

· Honor Societies: Tau Beta Pi, Sigma Gamma Tau, Pi Mu Epsilon, Phi Beta Delta

PROFESSIONAL AFFILIATIONS

· Associate Fellow: American Institute of Aeronautics and Astronautics

· Member: American Society for Engineering Education, Society of Automotive Engineers,

PROFESSIONAL EXPERIENCE

Associate Professor, August 2004 to present

Assistant Professor, August 1998 to July 2004

The University of Kansas, Department of Aerospace Engineering

· Responsible for Junior and Senior level courses in materials, processes, structural analysis and finite element analysis, and for graduate courses in composite materials and structures.

· PI on 26 awards totaling $3,550,513 and Co-I on 14 awards totaling $59,481,088

· PI. “NASA National Space Grant Consortium College and Fellowship Program FY2012.” NASA, 1/1/12 – 12/31/12. $49,683+$35,628 match.

· PI, “Development of a high-power, large antenna array and ultra-wideband radar for a Basler for sounding and imaging.” NSF, 10/1/12-9/30/14. $1,782,320 + $206,175 match

· PI, “NESSF Fellowship: Enhancing Airborne Remote Sensing Radar to Provide Higher Quality Ice Sheet Measurements”, NASA, 9/1/12-8/31/13. $30,000.

· PI. “EcoSAR: The First P-Band Digital Beamforming Polarimetric Interferometric SAR Instrument to measure Ecosystem Structure, Biomass, and Water.” NASA. 1/4/11 – 3/31/14. $745,634.

· Co-I, “Electromagnetic Environmental Concerns for Carbon-Fiber Composite Structures.” Aircraft Design Manufacturing Research Center, 1/1/10-12/31/10, $100,000.

· Co-I. “Measurement, Materials and Sustainable Environment Center (M2SEC).” NIST. 5/10/10-4/30/15. $13,450,000.

· PI. “NASA National Space Grant Consortium College and Fellowship Program FY2011.” NASA, 1/1/11 – 12/31/11. $49,682+$35,627 match.

· Co-I, “NSF Center for Remote Sensing of Ice Sheets”, $18,000,000. National Science Foundation, June, 2010 – June, 2015.

· Co-I. “Integrated Radar Instrumentation for Deployment During the NASA 2010 Operation IceBridge Field Campaign.” NASA. 11/1/09-10/31/10. $2,100,000.

· PI, “NASA National Space Grant Consortium College and Fellowship Program NASA 2009.” Kansas Space Grant Consortium (NASA), 4/1/09-3/31/10. $65,653 NASA + $38,768 match

· Co-I, “Radar Instrumentation for DC-8 for Measurements over Antarctic Ice.” NASA. 6/1/09-4/30/10, $1,904,369.

· Co-I, “Science and Technology Center: Ice Sheets and Sea Level Rise”, $19,797,469, National Science Foundation, June, 2005 – June, 2010.

· PI. “Development of a Collaborative Transportation Vehicle Prototyping Center, with Initial Application to a Low Altitude Medium Endurance UAV for Transportation Research.” KU Transportation Research Institute. 8/16/08-5/1/10. $200,000 TRI plus $108,762 industry match plus $123,862 local match.

· Co-I. IGERT: C-CHANGE Climate Change, Humans and Nature in the Global Environment.” NSF. 7/1/08-6/30/13. $3,200,000.

· PI, “NASA National Space Grant Consortium College and Fellowship Program NASA 2008-09.” Kansas Space Grant Consortium (NASA), 1/5/08-1/4/09. $42,000 NASA + $28,000 match

· PI, “Exploration Systems Mission Directorate Higher Education 2006 NASA Exploration Internships.” Kansas Space Grant Consortium (NASA), 5/01/07-7/31/07, $24,000 NASA

· PI, “NASA National Space Grant Consortium College and Fellowship Program 2006-07.” Kansas Space Grant Consortium (NASA), 1/5/07-5/31/08, $42,000 NASA + $28,000 match

· PI, “NASA National Space Grant Consortium.” Kansas Space Grant Consortium (NASA), original grant 1/5/06-12/31/06, $15,500 supplement awarded Fall ’07, $19,947 supplement and $19,947 match awarded Fall ‘07

· PI, “University of Kansas Space Grant Consortium Summer Research Program for Students in Higher Education.” Kansas Space Grant Consortium (NASA), 5/22/06-12/31/06, $22,247

· PI, “Undergraduate Research Experiences in the Center for Remote Sensing of Ice Sheets.” KU Office of the Provost. 8/15/06 to 12/31/06. ($6000)

· PI, “Adaptive Aircraft Analysis -- Rapid Vehicle Engineering: AAA-Raven, A Research Initiation Proposal for the Transportation Research Institute.” KU Transportation Research Institute, 8/18/06 to 8/17/07, ($49,986+$16,644 (KU) + $235,000 (Industry)),

· PI, “Acquisition of a Shack-Hartmann Wavefront Sensor to Enable a Kansas Resource for Fiber Reinforced Plastic Mirrors,” Kansas NASA EPSCoR, 8/16/06 – 3/31/07, $37,062.

· PI, “Thermal and Hygroscopic Stability of Carbon Composite Blanks for Fiber Reinforced Plastic Mirrors,” Kansas NASA EPSCoR, 8/01/06 – 5/31/07, $19589.

· PI, “Cryogenic Thermal Response of Monolithic Laminates for Mirrors,” Catholic University of America, 8/01/06 – 2/28/07, $5000

· PI, “Medium Aperture Lightweight Mirrors,” $5,000, Bennett Optical Research, Inc., September, 2005 – June, 2006.

· PI, Midwest Smart Work Zone Deployment Initiative: Design of Portable Rumble Strips Phase II,” $22,150, Kansas Department of Transportation, August, 2005-July, 2006.

· Co-I, “Multidisciplinary Entrepreneurship Thematic Learning Community: Creating Opportunities for Enrepreneurship Education From Top to Bottom,” $7,000, Lemelson Foundation, June, 2005 – May, 2006.

· Co-I, “Science and Technology Center: Ice Sheets and Sea Level Rise”, $19,797,469, National Science Foundation, June, 2005 – June, 2010.

· Co-I, “Mission Concepts for Uninhabited Aerial Vehicles in Cryospheric Science Applications, $74,570, NASA, June, 2004-December, 2004

· PI, “Midwest Smart Work Zone Deployment Initiative: Design of Portable Rumble Strips”, $18,640, Kansas Department of Transportation, January, 2004-December, 2004.

· Co-I, "Collaborative Research: Development of an Ultra-Lightweight Telescope for Ground-Based Research in Optical Astronomy – REU Supplement", $10,816, National Science Foundation, September, 2003 - August, 2006.

· Co-I, "Collaborative Research: Development of an Ultra-Lightweight Telescope for Ground-Based Research in Optical Astronomy", $585,785, National Science Foundation, September, 2003 - August, 2006.

· PI, " Structural and Aerodynamic Optimization of Ultralightweight Technology for Research in Astronomy", $79,988, NASA EPSCoR, June 2003 - December 2003.

· PI, "Hydroforming Continuous Fiber Thermoplastic Composites", $11,708, KU General Research Fund, June, 2003 - May, 2004.

· PI, " Integrating Knowledge Capture and Knowledge Reuse in the Engineering Undergraduate Curriculum", $100,000, National Science Foundation, Oct. 2002 - Dec. 2003.

· Co-I, "Integrating Modern Design and Manufacturing Equipment into the Engineering Curricula, CCLI", $87,299 (+$108,416 match), National Science Foundation, June 2002 - May 2004.

· PI, "Mechanical Performance and Quantitative Nondestructive Evaluation of Textile Composites," $137,533, NSF EPSCoR, Oct. 2000 - Dec. 2001 (ext. May 2002).

· PI, "Integrated Design and Analysis Tools for Reduced Weight, Affordable Fiber Steered Composites," $297,986, DoD EPSCoR (ONR), May 2000 - Apr. 2003.

· Co-I, "Surface Studies of Carbon Fibers and Composites," $70,364, Oct. 1999 - Sep. 2001.

· PI, "Web Based Collaborative Environment With Knowledge Driven Agents," $5,649, TechnoSoft, Inc., Aug. 1999.

· PI, "Integrated Design and Analysis Tools for Composites," $22,493, The Boeing Company, June 1999 - Aug. 1999.

Senior Project Engineer, Design/Development, February 1989 to July 1998

The Boeing Company (formerly McDonnell-Douglas Aerospace East), St. Louis, MO

Security Clearance: DoD Secret

· Defined the best-practice process for design, analysis and manufacturing of composite structure and developed a knowledge based software tool to facilitate this process

· Developed the ply layup for the inlet duct and all skin panels for the forward fuselage of the Joint Strike Fighter Concept Demonstrator Aircraft

· Explored fiber steering and the fiber placement process through analytical and experimental studies to assess the potential for providing reduced weight, affordable composite structure

· Developed and twice taught a 40 hour internal training course in composite design practices and fundamentals of finite element analysis

· Performed analyses for a composite carrythrough bulkhead, thick composite lugs and multi-directionally reinforced (non-planar) composite fittings

· Initiated structural trade studies and recommended technology integration for conceptual aircraft

Research Assistant, September 1992 to December 1995

Institute for Physical Research and Technology, Iowa State University, Ames, IA

· Performed basic research into the behavior of textile composites, including fabrication, ultrasonic nondestructive evaluation, and mechanical testing using Moiré interferometry

· Investigated the effects of fiber misalignment, undulation and architecture distortion on mechanical properties

· Designed and demonstrated laboratory tools and procedures for fabricating idealized textile composites exhibiting intentionally aligned fiber patterns or specific fiber architecture distortions

COURSES DEVELOPED AND TAUGHT AT KU

· AE421, Aerospace Computer Graphics, 4 cr. (Spring '00, Spring '01, Spring '02, Spring '03, Spring ’04, Spring ’05, Spring ’07, Spring ’08, Spring ’09, Spring ‘11, Spring ’12, Spring ‘13)

· AE508, Aerospace Structures II, 3 cr. (Spring '99, Spring '00, Spring '01, Spring '02, Spring '03, Spring ’04, Spring ’05, Spring ’06, Spring ’07, Spring ’08, Spring ’09, Spring ’11, Spring ’12, Spring ‘13)

· AE509, Aerospace Structures II, Honors, 3 cr. (Spring '00, Spring '01, Spring ’04, Spring ‘05)

· AE510, Aerospace Materials and Processes, 4 cr. (Fall '98, Fall '99, Fall '00, Fall '01, Fall '02, Fall '03, Fall ’04, Fall ’05, Fall ’06, Fall ’07, Fall ’08, Fall ’09, Fall ’10, Fall ’11, Fall’12, Fall ‘13)

· AE709, Composite Structures, 3 cr. (Fall '99, Fall '00, Fall '01, Fall '02, Fall ’04, Spring ’06, Fall ’08, Fall ’09, Fall ’10, Fall ’11, Spring ‘12)

· AE710, Advanced Composite Structures, 3 cr. (Spring '02, Spring '03, Spring ’05, Spring ’09, Spring ‘11)

· AE790, Structural Design and Analysis of Unmanned Aircraft, 3 cr., (Fall ’06)

MAJOR SCHOLARSHIP

Book Sections

Hale, R.D. “Composite Structures”, 2001 McGraw-Hill Yearbook of Science and Technology, McGraw-Hill, October, 2000. pp. 105-107

Patents

Hale, R.D. and Vasey-Glandon, V.M. “Fiber Placement and Fiber Steering Systems and Corresponding Software for Composite Structures” U.S. Patent 6,799,081 issued 26 September, 2004.

Vasey-Glandon V.M. and Hale, R.D. “Knowledge –Driven Composite Design Optimization Process and System Therefor” European patent EP 1 050 396 B1 issued 6 August, 2003.

Vasey-Glandon V.M. and Hale, R.D. “Knowledge –Driven Composite Design Optimization Process and System Therefor” U.S. Patent 6,341,261 B1 issued 22 January, 2002.

Vasey-Glandon V.M. and Hale, R.D. “Knowledge –Driven Composite Design Optimization Process and System Therefor” U.S. Patent 5,984,511 issued 16 November, 1999.

Engineering Development Projects at KU (Professional Practice)

Team Lead, MRI: Development of a high-power, large antenna array and ultrawideband radar for a Basler for sounding and imaging of fast-flowing glaciers and mapping internal layers

Team Lead, Meridian UAV; 26’ span, 1100 lb UAV designed for polar remote sensing

Team Lead, Mccords ice penetrating radar installation on NASA DC8; first bed topology from 30,000ft at Mach 0.8

Team Lead, Mcords, accumulation, snow and KU radar installation on NASA P-3; world’s largest ice penetrating radar installation

International Field Deployments (Professional Practice)

Team Lead, NEEM, Greenland, May 15-Aug 15, 2011

Team Lead, McMurdo, Antarctica, Dec. 4, 2009 – Jan 10, 2010

Team Lead, McMurdo and WAIS Divide, Antarctica, Dec 10, 2007-Jan 9, 2008

Journals

F. Rodriguez-Morales, S. Gogineni, C. Leuschen, J. Paden, J. Li, C. Lewis, B. Panzer, D. Gomez-Garcia, A. Patel, K. Byers, R. Crowe, K. Player,R. Hale, E. Arnold, L. Smith, C. Gifford, D. Braaten, and C. Panton. “Advanced Multi-Frequency Radar Instrumentation for Polar Research. IEEE Transactions on Geoscience and Remote Sensing, In press.

J. Li, J. Paden, C. Leuschen, F. Rodriguez-Morales, R. Hale, E. Arnold, R. Crowe, D. Gomez-Garcia, and P. Gogineni, "High-Altitude Radar Measurements of Ice Thickness over the Antarctic and Greenland Ice Sheets as a part of Operation Ice Bridge," IEEE Transactions on Geoscience and Remote Sensing, volume 51, number 2, 2013.

K. J. Byers, A. R. Harish, S. A. Seguin, C. Leuschen, F. Rodriguez-Morales, J. Paden, E. Arnold, and R. Hale, "A Modified Wideband Dipole Antenna for an Airborne VHF Ice Penetrating Radar," IEEE Transactions on Instrumentation and Measurement, vol. 61, pp. 1435-1444, May 2012.

Lan, C.E., S. Keshmiri and R.D. Hale. “Fuzzy Logic Modeling of a Rolling Unmanned Vehicle in Antarctic Wind Shear.” Journal of Guidance, Control, and Dynamics, volume 35, number 5, (2012).

C. T. Allen, R. D. Hale, C. J. Leuschen, J. D. Paden, B. G. Panzer, E. Arnold, W. A. Blake, F. Rodriguez-Morales, J. D. Ledford, and S. A. Seguin, "Antarctic Ice Depth-sounding Radar Instrumentation for the NASA DC-8," IEEE Transactions on Aerospace and Electronic Systems, vol. 27, pp. 4-20, 03/2012 2012.

Kim. K and R.D. Hale. “Extensional and Flexural Stiffness in Quasi-Isotropic Laminates Using Continuous Fiber Reinforced Plastics and Distributed (Homogeneous) Fiber Reinforced Plastics.” Journal of Advanced Materials, v2, 2011.

Kim, Kyung-Pyo; Hale, Richard D. “Composite mirror surface deformation due to lay-up sequences within quasi-isotropic laminates.” Optical Engineering, Volume 49, Issue 6, pp. 063002-063002-10 (2010)

Anemaat, W., B. Kaushik, R.D. Hale and N. Ramabadran. “A Knowledge-Based Design Framework for Aircraft Conceptual and Preliminary Design.” SAE Transactions, 2007, Vol 115, Part 1, pp 598-611.

Hale, R.D., Schueler, K.L. and Lim, K. "Object-Oriented Design and Analysis Tools for Fiber Steered Composites." Journal of Advanced Materials. SAMPE. (II), 2006.

Schueler, K.L.; Miller, J.R. and Hale, R.D. Approximate Geometric Methods in Application to the Modeling of Fiber Placed Composite Structures. Journal of Computing and Information Science in Engineering. Volume 4, The American Society of Mechanical Engineers. 2004. pp 251-256.

Hale, R.D. "An Experimental Investigation of Strain Distribution in 2D and 3D Textile Composites." Composites Science and Technology. Volume 63, Number 15, 2003. pp. 2171-2185.

Hale, R.D. and Villa, M. "Influence of Opposing Wave Nesting in Compression-Loaded Composites." Journal of Composite Materials. Volume 37, Number 13, 2003. pp. 1149-1166.

Hale, R.D. and Adams, D.O. "Influence of In-Plane Fiber Misalignment on Moiré Interferometry Results," Journal of Composite Materials, Volume 31, Number 24, 1997. pp. 2444-2459.

Hale, R.D. and Adams, D.O. “Fabrication Methods for Producing Idealized Fiber Architecture in Textile Composites,” Advanced Composite Letters, Volume 2, Number 5, Woodhead Publishing, Ltd., 1993. pp. 183-186.

Software Systems

Ramabadran, N., Anemaat, W. and Hale, R.D. “Adaptive Aircraft Analysis – Rapid Vehicle Engineering.” 2004-2008.

Hale, R.D. and Schueler, K.L. "Steered Composite Analysis and Design System," 2000-2004.

Vasey-Glandon, V.M., Hale, R.D. et.al. “Parametric Composite Knowledge System,” McDonnell-Douglas proprietary software code (now commercialized to Unigraphics Solutions Inc.), 1996-1999.

Conference Proceedings (refereed)

F, Rodriguez-Morales, S. Gogineni, C. Leuschen, J. Paden, B. Panzer, C. Lewis, D. Gomez, R. Crowe, A. Patel, R. Hale, E. Arnold, J. Li, S. Yan, and D. Braaten. “Airborne Radar Sensor Package for Coincidental Multi-Frequency Measurements over the Cryosphere.” European Geosciences Union General Assembly 2013, Vienna, Austria, 7-12 April, 2013.

W.A. Anemaat, W. Liu, B. Kaushik, M. Yang, M. Brown, R. Hale, “Design, Build and Fly: NASA Lockheed P3 Orion with External Antenna Fairings”, AIAA-2013-0019, 51st AIAA Aerospace Sciences Meeting, January 7-10, 2013, Grapevine, Texas.

P. Gogineni, D. Braaten, F. Rodriguez-Morales, J. Li, C. Leuschen, J. Paden, R. Hale, E. Arnold, B. Panzer, D. Gomez-Garcia, R. Crowe, A. Patel, and J. B. Yan, "Multi-Frequency Airborne Radar Measurements of Outlet Glaciers and Ice Streams," American Geophysical Union, 2012. 3-7 December, 2012. San Francisco, CA.

Gogineni. S., J Paden., R. Hale, C. Leuschen, D. Braaten, F. Rodriguez-Morales, S. Yan and J. Li. “Ultra Wideband Radars for Imaging of Ice-Bed Topography and Fine-Resolution Mapping of Internal Layers from the surface to Bed.” International Partnerships in Ice Core Sciences First open Science Conference, 1-5 October, 2012. Presquile de Giens, Cote d’Azur, France.

Emily J. Arnold, Jie-Bang Yan, Jilu Li, Richard Hale, Fernando Rodriguez-Morales, and Prasad Gogineni. “Identification and Compensation of Aircraft Integration Effects in Wing-Mounted Phased Array for Ice Sheet Sounding.” Antenna Applications Symposium, 18-20 September, 2012. Amherst, MA.

R. F. Rincon, T. Fatoyinbo, K. J. Ranson, G. Sun, M. Deshpande, M. Perrine, C. F. Du Toit, Q. Bonds, V. Marrero, R. D. Hale, A. Bhat, and P. James. “Development of the ECOSAR P-Band Synthetic Aperture Radar.” Proceedings of the IEEE International Geoscience and Remote Sensing Symposium, 22-27 July, 2012, Munich, Germany.

P. Gogineni, D. Braaten, F. Rodriguez-Morales, J. Li, C. Leuschen, J. Paden, R. Hale, E. Arnold, B. Panzer, D. Gomez-Garcia, R. Crowe, A. Patel, and J. B. Yan, "Multi-Frequency Airborne Radar Measurements of Outlet Glaciers and Ice Streams," XXXII Scientific Committee on Antarctic Research Science Week, 17-19 July, 2012, Portland, OR.

S. Gogineni, C. Leuschen, J. Paden, F. Rodriguez-Morales, J. Li, R. Hale, D. Braaten, E. Arnold, B. Panzer, D. Gomez, R. Crowe, A. Patel, and S. Yan “Radar Instrumentation for Polar Research.” Proceedings of the BGS/RAS/IGS/TGS New Advances in Geophysics Meeting, 9-10 February, 2012, London, England.

J. Li, S. Gogineni, J. Paden, C. Leuschen, F. Rodriguez-Morales, R. Crowe, D. Gomez-Garcia, R. Hale. “Coherent and Incoherent Clutter Reduction Techniques to Sound Ice from High Altitudes.” EUSAR 2012 – 9th European Conference on Synthetic Aperture Radar. 23-26 April, 2012. Nuremberg, (invited)

S. Gogineni, J. Li, J. Paden, L. Smith, R. Crowe, A. Hoch, C. Lewis, E. Arnold, F. Rodriguez-Morales, C. Leuschen, R. Hale, A. Harish and D. Braaten. “Sounding and Imaging of Fast Flowing Glaciers and Ice-Sheet Margins.” EUSAR 2012 – 9th European Conference on Synthetic Aperture Radar. 23-26 April, 2012. Nuremberg, Germany (invited).

Hale, R.D., E. Arnold, M. Ewing and W. Liu. “Method for Design and Analysis of Externally Mounted Antenna Fairings in Support of Cryospheric Surveying” AIAA-2011-171, 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Denver, CO 4-7 April, 2011.

Leuschen, C.; Gogineni, P. S.; Allen, C.; Paden, J. D.; Hale, R.; Rodriguez-Morales, F.; Harish, A.; Seguin, S.; Arnold, E.; Blake, W.; Byers, K.; Crowe, R.; Lewis, C.; Panzer, B.; Patel, A.; Shi, L. “The CReSIS Radar Suite for Measurements of the Ice Sheets and Sea Ice during Operation Ice Bridge.” American Geophysical Union, Fall Meeting 2010, abstract #C44A-02.

Hale. R.D., W.R. Donovan, and S. Keshmiri. “UAS Cryospheric Remote Sensing in the Center for Remote Sensing of Ice Sheets,” AUVSI’s Unmanned Systems North America 2009, August 10-13, 2009. Washington, DC.

Hale, R.D. and K.P. Kim. “Surface Deformation in a Circular Quasi- Isotropic Laminate Due to Additional Resin Layers.” AIAA-2009-2420, 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 4-7 May, 2009, Palm Springs, CA.

Shah Keshmiri§, Edmond Leong(, Rylan Jager(, and Richard Hale. “Modeling and Simulation of the Yak-54 Scaled Unmanned Aerial Vehicle Using Parameter and System Identification.” AIAA-2008-6900, AIAA Atmospheric Flight Mechanics Conference and Exhibit, 18 - 21 Aug 2008, Honolulu, Hawaii

W.R. Donovan, R.D. Hale , and W. Liu “Design and Structural Analysis of the Meridian Unmanned Aircraft” AIAA-2008-2261, 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 7 - 10 Apr 2008, Schaumburg, IL.

D.M. Mueller, W.R. Donovan, E. Runge, and W. Liu, “Structural Design, Analysis, and Testing of Vivaldi Ground Penetrating Radar Antennas for the Meridian UAS,” AIAA-2008-1832, 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 7 - 10 Apr 2008, Schaumburg, IL. (student paper competition, team mentored by R. Hale).

K.P. Kim and R.D. Hale. “Design of Directionally Uniform Extensional and Flexural Stiffness in Quasi-Isotropic Laminates.” AIAA-2008-1749, 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 7 - 10 Apr 2008, Schaumburg, IL.

K.P. Kim and R.D. Hale. “Analysis of Surface Deformation Due to Thermal Load on Circular Quasi-Isotropic Laminate Mirrors.” AIAA-2008-2185, 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 7 - 10 Apr 2008, Schaumburg, IL.

Jezek, K., Braaten, D., Gogineni, S., van der Veen, C., Allen, C., Alley, R., Allison, I., Anandakrishnan, S., Bindschadler, R., Bowen, C., Bromwich, D., Colgren, R., Dahl-Jensen, D., Downing, D., Ewing, M., Fastook, J., Hale, R., Hayden, L., Hughes, T., Joughin, I., Krabill, W., Landis, C., LeCompte, M., Leuschen, C., Mosley-Thompson, E., Pollard, D., Prescott, G., Rignot, E., Thomas, R., Thompson, L., Webber, G., Wingham, D., and Zagorodnov, V., “Center for Remote Sensing of Ice Sheets (CReSIS),” EOS Transactions, AGU, 88(38), 371, 2007.

Anemaat, W., B. Kaushik, R.D. Hale and N. Ramabadran. “AAARaven: Knowledge-Based Aircraft Conceptual and Preliminary Design.” AIAA-2007-2291. 48th AIAA / ASME / ASCE / AHS / ASC Structures, Structural Dynamics and Materials Conference, Hawaii, 2007.

Donovan, W.R., R.D. Hale. M. Ewing and K Siegele. “The Design and Development of the Onboard Systems for the Meridian Unmanned Aircraft.” AIAA-2007-2745, Infotech at Aerospace, California, May, 2007

Peter C. Chen and Richard D. Hale. “Large Aperture Nanocomposite Deformable Mirror Technology.” 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes. Edited by Zhang, Yudong; Jiang, Wenhan; Cho, Myung K.. Proceedings of the SPIE, Volume 6721, pp. 67210R (2007).

Donovan, W.R., R.D. Hale. M. Ewing and K Siegele. “The Design and Development of the Onboard Systems for the Meridian Unmanned Aircraft.” Infotech at Aerospace, California, May, 2007.

Donovan, W.R. and R.D. Hale. “The Design of an Uninhabited Air Vehicle for Use in Polar Research.” SAE 06GATC-77, Proceedings of the SAE General Aviation Technology Conference, Wichita, KS. 30 August, 2006.

Anemaat, W., B. Kaushik, R.D. Hale and N. Ramabadran. “A Knowledge-Based Design Framework for Aircraft Conceptual and Preliminary Design.” SAE 06GATC-75, Proceedings of the SAE General Aviation Technology Conference, Wichita, KS. 30 August, 2006.

Hale, R.D., Landes, J.A. and Kaushik, P.B.R. “Structural Design and Simulation of Ultralightweight technology for Research in Astronomy,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Newport, Rhode Island, 1-4 May, 2006.

Landes, J., Hale, R.D. and Ewing, M. “Dynamic Structural Response of a Fiber Reinforced Plastic Telescope Mirror,” Society for Experimental Mechanics IMAC XXIV, St. Louis, Missouri USA, January 30 – February 2, 2006

Mathur, Guarov, R. Taghavi and R.D Hale. "A Computational and Experimental Analysis of the Flow Around a Tractor-Trailer." FEDSM2005-77324, 2005 American Society for Mechanical Engineers Fluids Engineering Summer Conference, June 19-23, 2005, Houston, TX.

Kaushik, B., R.D. Hale and R. Taghavi. "CFD Application for the Characterization of Surface Pressures on Telescopes." FEDSM2005-77345, 2005 American Society for Mechanical Engineers Fluids Engineering Summer Conference, June 19-23, 2005, Houston, TX.

Boone, Bradley G., Jonathan R. Bruzzi, Bernard E. Kluga, Eric W. Rogala, Peter Chen and R.D. Hale. Development and Testing of an Actively-Controlled Large Aperture Cassegrain Telescope for Spacecraft Deployment, Proceedings of SPIE -- Volume 5487, Optical, Infrared, and Millimeter Space Telescopes, John C. Mather, Editor, October 2004, pp. 1042-1053

Hale, R.D. and Villa, M. "Static and Dynamic Mechanical Influence of Fiber Waviness textile Composites," AIAA-2003-1464, 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Norfolk, VA, 7-10 April, 2003.

Moon, R.S., Johnson, C.C. and Hale, R.D. "Nondestructive Evaluation and Mechanical Testing of Steered Fiber Composites," SAMPE 2002, May 13-16, 2002, Long Beach CA.

Hale, R.D. and Schueler, K. "Object Oriented Design and Analysis Tools for Fiber Placed and Fiber Steered Structures," SAMPE 2002, May 13-16, 2002, Long Beach CA.

Wiehn, M. and Hale, R.D. "Low Cost Robotic Fabrication Methods for Tow Placement," SAMPE 2002, May 13-16, 2002, Long Beach CA.

Moon, R., Lim, K., Schueler, K., Wiehn, M. and Hale, R.D. "Current Progress on Integrated Design and Analysis Tools for Fiber Steered Composites," AIAA-2002-1763, 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Denver, CO, 22-25 April, 2002.

Hale, R.D. and Schueler, K. "Object-Oriented Implementation of an Integrated Design and Analysis Tool for Fiber Placed Structures," AIAA-2002-1223, 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Denver, CO, 22-25 April, 2002.

Hale, R.D. and Schueler, K. "Knowledge-Based Software Systems for Composite Design, Analysis and Manufacturing," SAE 2002-01-1536, SAE General Aviation Technology Conference and Exposition, April 16-18, 2002, Wichita KS.

Hale, R.D. and Vasey-Glandon, V.M. "PACKS: An Affordable Knowledge-Driven Composite Design for Manufacturing Process." SAMPE 2001, May 6-10, 2001, Long Beach CA.

Ewing, M.S., Yilmaz, Y. and Hale, R. "Using a Simple Concentric Cylinder Model to Interpret Failure Stresses in a Single Fiber Fragmentation Test", Seventh Annual International Conference on Composites Engineering, Denver, CO, 2-8 July, 2000.

Vasey-Glandon, V.M. and Hale, R.D. “PACKS (Parametric Composite Knowledge System): An Affordable Structural Definition Process for Composites”, 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Atlanta, GA, 3-6 April, 2000.

Hsu, D.K., Peters, J.J. and Hale, R.D. “Ultrasonic Imaging of Internal Structures of a Fiber Steered Composite Panel,” Review of Progress in Quantitative Nondestructive Evaluation, Volume 18, Kluwer Academic/Plenum Publishing, 1999. Pp. 1313-1319.

Hale, R.D., Hsu, D.K. and Adams, D.O. "Ultrasonic NDE Techniques and the Effects of Flaws on Mechanical Performance in Multi-Directionally Reinforced Textile Composites," Review of Progress in Quantitative Nondestructive Evaluation, Volume 15, Plenum Publishing, 1996. pp. 1247-1254.

Hale, R.D. and Hsu, D.K. “Ultrasonic NDE of 3D Textile Composites,” Review of Progress in Quantitative Nondestructive Evaluation, Volume 14, Plenum Publishing, 1995. pp. 1407-1414.

Hale, R.D. and Hsu, D.K. “Ultrasonic NDE of 3D Textile Composites — A Preliminary Study,” Review of Progress in Quantitative Nondestructive Evaluation, Volume 13, Plenum Publishing, 1994. pp. 1245-1252.

Dissertation

Hale, R.D. "Ultrasonic Nondestructive Evaluation Techniques and the Effects of Fiber Architecture on Mechanical Performance in Multi-Directionally Reinforced Textile Composites," Ph.D. Dissertation, Iowa State University, 1995.

MINOR SCHOLARSHIP

Patent Applications

Hale, R.D. and Schueler, K. "Geometric Methods for Analysis, Design and Optimization of Fiber Paths in Tow-Based Composites, and System Therefor." Disclosure Statement, University of Kansas, 20 November, 2002.

Hale, R.D. and Vasey-Glandon, V.M. "Fiber Placement and Fiber Steering Systems and Corresponding Software for Composite Structures." Attorney Docket 99-441, Submitted to U.S. Patent Office July, 2001.

Hale, R.D. and Vasey-Glandon, V.M. “Parametric Composite Knowledge System (PACKS): Fiber Placement and Fiber Steering Development for Composite Structures.” Disclosure statement, The Boeing Company, 20 December, 1999.

Vasey-Glandon, V.M., Hale, R.D. and Schmitz, J. "Knowledge Driven Composite Design Optimization Process and System Therefor," European patent application 99302710.1, 4 July, 1999.

Vasey-Glandon, V.M., Hale, R.D. and Schmitz, J. "Knowledge Driven Composite Design Optimization Process," submitted to the U.S. patent office, 14 November, 1996.

Hale, R.D. and Adams, D.O. “Cure-on-the-Loom Technology — a Statement of Disclosure,” Submitted to Iowa State University Research Foundation, Henderson & Sturm patent attorneys and the U.S. Patent Office, 10 October, 1993.

Conference Proceedings (Refereed Abstract)

Mathur, Guarov, R. Taghavi and R.D Hale. "A Computational and Experimental Analysis of the Flow Around a Tractor-Trailer." FEDSM2005-77324, Accepted for publication and presentation at 2005 American Society for Mechanical Engineers Fluids Engineering Summer Conference, June 19-23, 2005, Houston, TX.

Kaushik, B., R.D. Hale and R. Taghavi. "CFD Application for the Characterization of Surface Pressures on Telescopes." FEDSM2005-77345, Accepted for publication and presentation at 2005 American Society for Mechanical Engineers Fluids Engineering Summer Conference, June 19-23, 2005, Houston, TX.

Twarog, B.A., B. J. Anthony-Twarog, S. J. Shawl, R. Hale, R. Taghavi, R. Fesen, P. B. Etzel, R. Martin and R. Romeo. "The UltraLightweight Technology for Research in Astronomy (ULTRA) Project," Bulletin of the American Astronomical Society, 36, No. 5, 48.02, 2004.

Etzel, P.B., R. Martin, R. Romeo, R. Fesen, R. Hale, R. Taghavi, B. J. Anthony-Twarog, S. J.. Shawl and B. A. Twarog. "Structural and Aerodynamic Optimization of UltraLightweight Technology for Research in Astronomy (ULTRA)," Bulletin of the American Astronomical Society, 36, No. 5, 48.03, 2004.

Maletsky, L.P. and Hale, R.D. "The Practical Integration of Rapid Prototyping Technology into Engineering Curricula," Proceedings of the 2003 ASEE Midwest Section Meeting, 10 Sept. 2003.

Liu, Z., Fei, D., Dayal, V., Hsu, D.K. and Hale, R.D. "Ultrasonic NDE and Mechanical Testing of Fiber Placement Composites." 28th Annual Review of Progress in Quantitative Nondestructive Evaluation, Jul 29-Aug. 3, 2001, Brunswick, ME.

Verhulst, M.A., Hale, R.D., West, A.C. and Adams, D.O. "Model Materials for Experimental/Analytical Correlations of Textile Composites," Proceedings of the SEM Spring Conference on Experimental Mechanics, Bellevue, WA, 2-4 June, 1997, pp. 182-183.

Hale, R.D. and Adams, D.O. "Influence of Textile Composite Microstructure on Moire Interferometry Results," Proceedings of the SEM Spring Conference on Experimental Mechanics, Grand Rapids, MI, 12-14 June 1995, pp. 507-513.

SELECTED SCHOLARLY PRESENTATIONS

· F, Rodriguez-Morales, S. Gogineni, C. Leuschen, J. Paden, B. Panzer, C. Lewis, D. Gomez, R. Crowe, A. Patel, R. Hale, E. Arnold, J. Li, S. Yan, and D. Braaten. “Airborne Radar Sensor Package for Coincidental Multi-Frequency Measurements over the Cryosphere.” European Geosciences Union General Assembly 2013, Vienna, Austria, 7-12 April, 2013.

· W.A. Anemaat, W. Liu, B. Kaushik, M. Yang, M. Brown, R. Hale, “Design, Build and Fly: NASA Lockheed P3 Orion with External Antenna Fairings”, AIAA-2013-0019, 51st AIAA Aerospace Sciences Meeting, January 7-10, 2013, Grapevine, Texas.

· P. Gogineni, D. Braaten, F. Rodriguez-Morales, J. Li, C. Leuschen, J. Paden, R. Hale, E. Arnold, B. Panzer, D. Gomez-Garcia, R. Crowe, A. Patel, and J. B. Yan, "Multi-Frequency Airborne Radar Measurements of Outlet Glaciers and Ice Streams," American Geophysical Union, 2012. 3-7 December, 2012. San Francisco, CA.

· Gogineni. S., J Paden., R. Hale, C. Leuschen, D. Braaten, F. Rodriguez-Morales, S. Yan and J. Li. “Ultra Wideband Radars for Imaging of Ice-Bed Topography and Fine-Resolution Mapping of Internal Layers from the surface to Bed.” International Partnerships in Ice Core Sciences First open Science Conference, 1-5 October, 2012. Presquile de Giens, Cote d’Azur, France.

· Emily J. Arnold, Jie-Bang Yan, Jilu Li, Richard Hale, Fernando Rodriguez-Morales, and Prasad Gogineni. “Identification and Compensation of Aircraft Integration Effects in Wing-Mounted Phased Array for Ice Sheet Sounding.” Antenna Applications Symposium, 18-20 September, 2012. Amherst, MA.

· R. F. Rincon, T. Fatoyinbo, K. J. Ranson, G. Sun, M. Deshpande, M. Perrine, C. F. Du Toit, Q. Bonds, V. Marrero, R. D. Hale, A. Bhat, and P. James. “Development of the ECOSAR P-Band Synthetic Aperture Radar.” Proceedings of the IEEE International Geoscience and Remote Sensing Symposium, 22-27 July, 2012, Munich, Germany.

· P. Gogineni, D. Braaten, F. Rodriguez-Morales, J. Li, C. Leuschen, J. Paden, R. Hale, E. Arnold, B. Panzer, D. Gomez-Garcia, R. Crowe, A. Patel, and J. B. Yan, "Multi-Frequency Airborne Radar Measurements of Outlet Glaciers and Ice Streams," XXXII Scientific Committee on Antarctic Research Science Week, 17-19 July, 2012, Portland, OR.

· S. Gogineni, C. Leuschen, J. Paden, F. Rodriguez-Morales, J. Li, R. Hale, D. Braaten, E. Arnold, B. Panzer, D. Gomez, R. Crowe, A. Patel, and S. Yan “Radar Instrumentation for Polar Research.” Proceedings of the BGS/RAS/IGS/TGS New Advances in Geophysics Meeting, 9-10 February, 2012, London, England.

· J. Li, S. Gogineni, J. Paden, C. Leuschen, F. Rodriguez-Morales, R. Crowe, D. Gomez-Garcia, R. Hale. “Coherent and Incoherent Clutter Reduction Techniques to Sound Ice from High Altitudes.” EUSAR 2012 – 9th European Conference on Synthetic Aperture Radar. 23-26 April, 2012. Nuremberg, (invited)

· S. Gogineni, J. Li, J. Paden, L. Smith, R. Crowe, A. Hoch, C. Lewis, E. Arnold, F. Rodriguez-Morales, C. Leuschen, R. Hale, A. Harish and D. Braaten. “Sounding and Imaging of Fast Flowing Glaciers and Ice-Sheet Margins.” EUSAR 2012 – 9th European Conference on Synthetic Aperture Radar. 23-26 April, 2012. Nuremberg, Germany (invited).

· Hale, R.D., E. Arnold, M. Ewing and W. Liu. “Method for Design and Analysis of Externally Mounted Antenna Fairings in Support of Cryospheric Surveying” 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Denver, CO 4-7 April, 2011.

· Invited panelist and moderator, “Operating Unmanned Systems in the Arctic.” AUVSI’s Unmanned Systems North America 2010, August 24-27, 2010. Denver CO. (schedule conflict so Bill Donovan represented team)

· Invited panelist, Ewing, M.S. and Hale, R. D., “Applied Research Activities in the Design Education Curriculum at the University of Kansas”, presented at the Open Forum in Design Education:  The Role of Design Experience in Advancing Engineering Education (session 196), 49th AIAA Aerospace Sciences Meeting, Orlando, Florida, 6 Jan 2011.

· Hale. R.D., W.R. Donovan, and S. Keshmiri. “UAS Cryospheric Remote Sensing in the Center for Remote Sensing of Ice Sheets,” AUVSI’s Unmanned Systems North America 2009, August 10-13, 2009. Washington, DC.

· Hale, R.D. and K.P. Kim. “Surface Deformation in a Circular Quasi- Isotropic Laminate Due to Additional Resin Layers.” AIAA-2009-2420, 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 4-7 May, 2009, Palm Springs, CA.

· Shah Keshmiri§, Edmond Leong(, Rylan Jager(, and Richard Hale. “Modeling and Simulation of the Yak-54 Scaled Unmanned Aerial Vehicle Using Parameter and System Identification.” AIAA-2008-6900, AIAA Atmospheric Flight Mechanics Conference and Exhibit, 18 - 21 Aug 2008, Honolulu, Hawaii

· W.R. Donovan, R.D. Hale, and W. Liu “Design and Structural Analysis of the Meridian Unmanned Aircraft” AIAA-2008-2261, 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 7 - 10 Apr 2008, Schaumburg, IL.

· D.M. Mueller, W.R. Donovan, E. Runge, and W. Liu, “Structural Design, Analysis, and Testing of Vivaldi Ground Penetrating Radar Antennas for the Meridian UAS,” AIAA-2008-1832, 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 7 - 10 Apr 2008, Schaumburg, IL. (student paper competition, team mentored by R. Hale).

· K.P. Kim and R.D. Hale. “Design of Directionally Uniform Extensional and Flexural Stiffness in Quasi-Isotropic Laminates.” AIAA-2008-1749, 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 7 - 10 Apr 2008, Schaumburg, IL.

· K.P. Kim and R.D. Hale. “Analysis of Surface Deformation Due to Thermal Load on Circular Quasi-Isotropic Laminate Mirrors.” AIAA-2008-2185, 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 7 - 10 Apr 2008, Schaumburg, IL.

· Anemaat, W., B. Kaushik, R.D. Hale and N. Ramabadran. “AAARaven: Knowledge-Based Aircraft Conceptual and Preliminary Design.” AIAA-2007-2291. 48th AIAA / ASME / ASCE / AHS / ASC Structures, Structural Dynamics and Materials Conference, Hawaii, 2007.

· Donovan, W.R., R.D. Hale. M. Ewing and K Siegele. “The Design and Development of the Onboard Systems for the Meridian Unmanned Aircraft.” AIAA-2007-2745, Infotech at Aerospace, California, May, 2007

· Peter C. Chen and Richard D. Hale. “Large Aperture Nanocomposite Deformable Mirror Technology.” 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes. Edited by Zhang, Yudong; Jiang, Wenhan; Cho, Myung K.. Proceedings of the SPIE, Volume 6721, pp. 67210R (2007).

· R.D. Hale, “Development of an Uninhabited Aircraft for Cryospheric Remote Sensing,” National Oceanic and Atmospheric Administration Arctic Unmanned Aircraft Stakeholder Meeting, Oct. 16-17, 2007, Fairbanks, AK.

· R.D. Hale. “Strategic Alignment of Teaching and Research Enabled Through Virtual Product Development.” MSC Virtual Product Definition Conference, Oct 11-2, 2007

· CReSIS UAV Team Activities, presented at the 2007 Kansas UAV Symposium, Oct 3-5, 2007, Salinas, KS

· Donovan, W.R. and R.D. Hale. “The Development of an Uninhabited Aircraft System for Remote Sensing in the Cryosphere, C11A-1127.” AGU Conference, San Francisco, CA, 11 December, 2006

· Donovan, W.R. and R.D. Hale. “The Design of an Uninhabited Air Vehicle for Use in Polar Research.” SAE 06GATC-77, SAE General Aviation Technology Conference, Wichita, KS. 30 August, 2006.

· Anemaat, W., B. Kaushik, R.D. Hale and N. Ramabadran. “A Knowledge-Based Design Framework for Aircraft Conceptual and Preliminary Design.” SAE 06GATC-75, SAE General Aviation Technology Conference, Wichita, KS. 30 August, 2006.

· Hale, R.D. “NSF Science and Technology Center for Remote Sensing of Ice Sheets (CReSIS), An Introduction.” Unmanned Aerial Systems/Future Systems Symposium, Salinas, KS, 6 October, 2006.

· Anemaat, W., B. Kaushik, R.D. Hale and N. Ramabadran. “A Knowledge-Based Design Framework for Aircraft Conceptual and Preliminary Design.” AMRaven Users Group, Dayton, OH, 6 June, 2006.

· Hale, R.D., Landes, J.A. and Kaushik, P.B.R. “Structural Design and Simulation of Ultralightweight technology for Research in Astronomy,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Newport, Rhode Island, 1-4 May, 2006.

· Landes, J., Hale, R.D. and Ewing, M. “Dynamic Structural Response of a Fiber Reinforced Plastic Telescope Mirror,” Society for Experimental Mechanics IMAC XXIV, St. Louis, Missouri USA, January 30 – February 2, 2006

· Mathur, Guarov, R. Taghavi and R.D Hale. "A Computational and Experimental Analysis of the Flow Around a Tractor-Trailer." FEDSM2005-77324, 2005 American Society for Mechanical Engineers Fluids Engineering Summer Conference, June 19-23, 2005, Houston, TX.

· Kaushik, B., R.D. Hale and R. Taghavi. "CFD Application for the Characterization of Surface Pressures on Telescopes." FEDSM2005-77345, 2005 American Society for Mechanical Engineers Fluids Engineering Summer Conference, June 19-23, 2005, Houston, TX.

· Maletsky, L.P. and Hale, R.D. "The Practical Integration of Rapid Prototyping Technology into Engineering Curricula," 2003 ASEE Midwest Section Meeting, 10 Sept. 2003.

· Villa, M. and Hale, R.D. "Static and Dynamic Mechanical Influence of Fiber Waviness Textile Composites," AIAA-2002-1223, 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Norfolk, VA, 7-10 April, 2003.

· Hale, R.D. and Schueler, K. "Object Oriented Design and Analysis Tools for Fiber Placed and Fiber Steered Structures," SAMPE 2002, May 12-16, 2002, Long Beach CA.

· Hale, R.D. and Wiehn, M. "Low Cost Robotic Fabrication Methods for Tow Placement," SAMPE 2002, May 12-16, 2002, Long Beach CA.

· Hale, R.D. and Moon, R. "Nondestructive Evaluation and Mechanical Testing of Steered Fiber Composites," SAMPE 2002, May 13-16, 2002, Long Beach CA.

· Hale, R.D., Moon, R., Lim, K., Schueler, K., Wiehn, M. "Current Progress on Integrated Design and Analysis Tools for Fiber Steered Composites," AIAA-2002-1763, 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Denver, CO, 22-25 April, 2002.

· Hale, R.D. and Schueler, K. "Object-Oriented Implementation of an Integrated Design and Analysis Tool for Fiber Placed Structures," AIAA-2002-1223, 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Denver, CO, 22-25 April, 2002.

· Hale, R.D. and Schueler, K. "Knowledge-Based Software Systems for Composite Design, Analysis and Manufacturing," SAE 2002-01-1536, SAE General Aviation Technology Conference and Exposition, April 16-18, 2002, Wichita KS.

· Liu, Z., Fei, D., Dayal, V., Hsu, D.K. and Hale, R.D. "Ultrasonic NDE and Mechanical Testing of Fiber Placement Composites." 28th Annual Review of Progress in Quantitative Nondestructive Evaluation, Brunswick, ME, Jul 29-Aug. 3, 2001.

· Hale, R.D. and Vasey-Glandon, V.M. "PACKS: An Affordable Knowledge-Driven Composite Design for Manufacturing Process." SAMPE 2001, May 6-10, 2001, Long Beach CA.

· Hale, R.D. "Integrated Design and Analysis Tools for Reduced Weight, Affordable Fiber Steered Composites," Kansas State EPSCoR session, Kansas Statehouse, 6 February, 2001.

· Vasey-Glandon, V.M. and Hale, R.D. “PACKS (Parametric Composite Knowledge System): An Affordable Structural Definition Process for Composites”, 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Atlanta, GA, 3-6 April, 2000.

· Vasey-Glandon, V.M. and Hale, R.D. "Parametric Composite Knowledge System (PACKS) Application to Joint Strike Fighter at Boeing", 1998 Defense Manufacturing Conference, New Orleans, LA, 30 Nov.- 3 Dec., 1998.

· Hsu, D.K., Peters, J.J. and Hale, R.D. “Ultrasonic Imaging of Internal Structures of a Fiber Steered Composite Panel,” Review of Progress in Quantitative Nondestructive Evaluation Conference, Snowbird, VT, 19-24 July, 1998.

· Hale, R.D. "Structural Optimization of Fiber Placed Parts," Advanced Fiber Placement Technical Integration Conference, St. Louis, MO, 9-10 June, 1998.

· Verhulst, M.A., Hale, R.D., West, A.C. and Adams, D.O. "Model Materials for Experimental/Analytical Correlations of Textile Composites," SEM Spring Conference on Experimental Mechanics, Bellevue, WA, 2-4 June, 1997, pp. 182-183.

· Hale, R.D. and Hsu, D.K. "Ultrasonic NDE in Multi-Directionally Reinforced Textile Composites," NSF Industry/University Fall Review, Ames, IA, 23-25 October, 1995.

· Hale, R.D. and Adams, D.O. "Limitations of Moiré Interferometry Due to Free-Edge Strain Effects in Textile Composites," 24th Midwest Mechanics Conference, Ames, IA, 2-4 October, 1995.

· Hale, R.D., Hsu, D.K. and Adams, D.O. "Ultrasonic NDE Techniques and the Effects of Flaws on Mechanical Performance in Multi-Dimensionally Reinforced Textile Composites," Review of Progress in Quantitative Nondestructive Evaluation Conference, Seattle, WA, 31 July - 4 August, 1995.

· Hale, R.D. and Adams, D.O. "Influence of Textile Composite Microstructure on Moiré Interferometry Results," SEM Spring Conference on Experimental Mechanics, Grand Rapids, MI, 12-14 June, 1995.

· Hale, R.D. and Hsu, D.K. “Ultrasonic NDE of 3D Textile Composites,” Review of Progress in Quantitative Nondestructive Evaluation Conference, Snowmass, CO, 1-5 August, 1994.

· Hale, R.D. “Idealization of Fiber Architecture in Textile Composites,” 1994 International Student Paper Competition, SEM Spring Conference on Experimental Mechanics, Baltimore, MD, 6 June, 1994.

· Hale, R.D. and Hsu, D.K. "Ultrasonic NDE of 3D Composites -- A Preliminary Study," Review of Progress in Quantitative Nondestructive Evaluation Conference, Brunswick, ME, 31 July - 5 August, 1993.

SELECTED DEPARTMENT SERVICE ACTIVITIES

· Graduate advisor, Fall ’07, Summer ’08; 2010 – 2012

· Chair, AE Strategic Planning Committee, Fall 2012-present

· Member, AE Graduate Committee, Fall 2012-present

· Undergraduate Scholarship Officer, Fall 2004 – Fall 2007

· Facilitator/Mentor, Thematic Learning Community, Fall 2003 to 2010

· Chair, AE Department Chair Search Committee, Fall 2001 to Spring 2002

· AE Faculty search committee, Fall 2001 to Spring 2002, Fall 2006 to present

· Incoming Freshman Advising/Orientation, Summer 2000, 2001, 2002.

· Creation of new multidisciplinary composites lab, Fall 1998 to Fall 2000; Fall 2011-Spring 2013.

· Creation of new multidisciplinary Nondestructive Evaluation lab, Fall 1998 to Spring 2000.

· Department Scheduling Officer, Fall 1999 to Spring 2005

· Advised potential students and families, and provided facilities tours. Fall 1998 to present.

SELECTED SCHOOL SERVICE ACTIVITIES

· Member, LEEP2 Building Advisory Committee, Fall 2012 - present

· Member, M2SEC Building Advisory Committee, Fall 2011 - present

· Member, Numerous Search Committees, CReSIS faculty and staff

· Member, Self Engineering Leadership Development Program Advisory Committee

· Representative, Engineering Physics Advisory Board, Fall, 2004 – present.

· Representative, School of Engineering Graduate Scholarship Committee, Fall, 2004 – Fall 2008

· Representative, School of Engineering Undergraduate Scholarship Committee, Fall, 2004 – present.

· Chair, Transportation Research Institute director search committee, 2004, 2005.

· Chair, Transportation Research Institute faculty search committee, 2003.

· Representative, School of Engineering Library committee, 2003-2005.

· Representative, School of Engineering Computer committee, 2003-2010

· Representative, School of Engineering Computer committee, 2008-2010

· Faculty Advisor, Tau Beta Pi Engineering Honor Society, Summer 2003

· Guest lecturer, Duke TIP program, 2000-present

· Facilitator, SWE Summer Discovery Program (Aerospace), 2000-2010

·

· Guest lecturer, SWE Weekend of Engineering program, 2000-present

· Creation of new multidisciplinary rapid prototyping lab, Spring 2002 to Fall 2002.

· Member, College of Engineering Dean's Search Committee, Fall 2001 to Spring 2002

· Member, Information Technology Task Force, Fall 2001 to 2010

· Faculty Marshall, College of Engineering, 2000 Commencement, May 21,2000

SELECTED UNIVERSITY SERVICE ACTIVITIES

· Associate Director for Technology, NSF Center for Remote Sensing of Ice Sheets, Spring ’11 to present

· Member, Conflict of Interest Committee, Fall 2010 to present

· Chair, Faculty Senate, Faculty Handbook Task Force, Fall ’08 to present

· President, University Senate, Fall ’06 – Spring ‘07

· Member, Provost strategic planning steering committee, Fall 2010 to Spring 2012

· Chair, University Senate Executive Committee, Fall ’06 – Spring ‘07

· Member, Promotion and Tenure Task Force, Fall ’06 – Spring ‘07

· Member, Dean Bell 5 yr evaluation committee

· Chair, Faculty Senate Research Committee, Fall 2005 – Spring 2006

· Chair, Classified Research Task Force, Fall, 2005 – Spring 2006

· Member, Search Committee, Associate Vice Provost for Student Success, Fall 2005 – Spring 2006

· Member, Center for Teaching Excellence Advisory Board, 2005-present

· Representative, University Committee on Promotion and Tenure, 2004 – 2006

· Representative, Student Success Priority Initiatives, Fall, 2004.

· Facilitator, Thematic Learning Communities and the Residential Complex Director, 22 July, 2004

·

· Facilitator, KU Teaching Summit, “General Education Goals and the Professional Schools,” 17 August, 2004

·

· Facilitator, Writing in the Curriculum, A Visual Knowledge Project, CTE, 1 November, 2004

·

· Elected Representative, University Senate Executive Committee, May ’04 – Spring ‘07

· Guest Lecturer, GS804 (ethics in science and engineering), Fall ’07, Fall ‘08

· Member, Chancellors Advisory Committee on Athletics 2009-2011 (Compliance Chair, 2011)

·

· Member, University Senate Athletics Committee, 2009-2011

· Member, Creative Campus Steering Committee, 2008-2010

· Facilitator, Center for Teaching Excellence "Lunch and Conversation", Sept. 30, 2003.

· Facilitator, KU Teaching Summit III breakout session, August 19, 2003

· Representative, University Committee on Libraries, 2003 - 2006

· Representative, Faculty Senate Research Committee, 2003 - 2006

· Elected Representative, University/Faculty Councils, May 2003 – Spring ‘07

· Invited Lecturer, Kansas Center for Advanced Scientific Computing, April 19, 2002.

· Invited Lecturer, "About Teaching: A Conference for New GTA's," August 15, 2002.

· Invited Lecturer, "About Teaching: A Conference for New GTA's," August 16, 2001.

· Facilitator, Center for Teaching Excellence "Lunch and Conversation", March 14, 2001.

· Member, Best Practices in Teaching Institute 2000, CTE, May 23-24, 2000.

· Judge, Sigma Xi Student paper competition, Spring, 1999.

· Guest lecturer, Haskell Indian Nations University Bridge Program, October 24, 2000.

· Center for Teaching Excellence Ambassador, Spring 2001 to Spring 2007

SELECTED LOCAL/STATE/REGIONAL SERVICE ACTIVITIES

· Chair, Education Committee, Friends of Lied, Fall 2007 to Spring 2008

· Co-Chair, Advanced Materials and Medical Devices Hot Team, Kansas Bioscience Authority, 2005

· Member, Friends of the Lied Advisory Board, 2005-2008.

· Mentor, Olathe Northwest High School pre-Engineering Projects, 2004 – 2008.

· South Junior High School Career Fair, April 20, 2000.

· Invited Lecturer, "Flying in the New Millennium," Kansas Pilots Association, June 9-11, 2000.

SELECTED NATIONAL SERVICE ACTIVITIES

· Member, Council of Visitors, NSF office of Polar Programs, Spring 2013

· Session Chair, Design and Structures, SAE General Aviation Conference, 2006, 2008

· Proposal Review, NSF Office of Polar Programs

· Paper Review, AIAA Journal of Flight Mechanics.

· Associate Director, Kansas NASA Space Grant Consortium, 2004 - present

· Reviewer, Composites Part B.

· Reviewer, AIAA Journal of Aircraft.

· AFOSR Proposal Reviewer

· Member, Peer Review Board, Journal of Advanced Materials

· Reviewer, Sport Pilot

· Conference paper reviewer for American Society for Engineering Education

· Member, Aircraft Owners and Pilots Association

· NSF proposal reviewer, Advanced Sensors Technology

· Member, American Society for Engineering Education

· Associate Fellow, American Institute for Aeronautics and Astronautics

· Member, Tau Beta Pi

SELECTED INTERNATIONAL SERVICE ACTIVITIES

· Session Chair, one session in structural mechanics, AIAA SDM, 2007, 2008

· Session Chair, two sessions in structural mechanics, AIAA SDM, 2006

· Member, AIAA Structures Technical Committee, 2005-present

· Session Chair, two sessions in structural mechanics, AIAA SDM, 2005

· Member, Phi Beta Delta, Honor Society for International Scholars, Fall '03 - present

· Session Chair, Design and Analysis, SAMPE 2004, May 16-20, 2004.

· Member, SAMPE Design and Analysis Technical Committee, 2003 – 2005

· Journal Article Reviewer for Journal of Composite Materials

· Text Reviewer for Bertoline/Weibe Fundamentals of Graphics Communication, 3rd Edition, McGraw-Hill, 2001.

PAGE

xvii