AERvent - HUM GmbH...For Millenium M5 (Respironics) For Kröber O2, Kröber 4.0 Intake filter Silencer Device filters for CPAP- and homecare devices AEROvent® - Fine and Foam High

AEROvent®Medical filters

Safety through medical filter systemsWide product range of medical filters

2

AEROvent® - Bacterial and viral filters with HME | Ventilation filters

Electrostatic bacterial and viral filters with heat and moisture exchanger (HME), equipped with Luer-Lock port for CO2

measu ring. Efficient ventilation filters for filtration as well as heating and humidification of the respiratory air.

Reliable contamination control combined with a gentle respiratory gas conditioning.

Complete product line available in 3 sizes: Adults | Children | Neonates

Advantages• Reliable protection of the patient, the staff and the device

• Translucent design - ideal control of humidity

• Avoidance of excessive breathing gas humidification

• No necessity of active humidification

• Lightweight housing made of PP (polypropylene)

• Hygienically single packed

Efficient• Hydrophobic / hygroscopic

• High filtration efficiency - BFE / VFE 99.999 % / 99.999 %

• Ideal humidification performance

• Low flow resistance

AEROvent® - HFLS Adults

• Tidal volume range (VT): 150 - 1500 ml

• Humidity output: 31 mg H2O/l at VT 500 ml

• Flow resistance: 1.1 mbar at 30 l/min

• Dead space: 55 ml

• ISO connection: 22M/15F - 22F/15M

• Weight: 27 g

AEROvent® - HFLN Neonates

• Tidal volume range (VT): >35 ml


• Flow resistance: 0.83 mbar at 7.5 l/min


• ISO connection: 15F - 15M/8.5M

• Weight: 9 g

AEROvent® - HFLP Children





• ISO connection: 22M/15F - 15M

• Weight: 18 g


3

Suction port

O2 Connection

for 6 mm tubes

AEROvent® - Heat and moisture exchanger (HME)

Heat and moisture exchanger („artifical noses“) for patients with tracheostomy. The artifical nose filters the

dust particles out of the air and saves the humidity of the exhaled air in order to return it to the inhaled air.

Advantages• Filtration of particles, as well as heating and humidification

of respiratory air

• Re-establishment of the breathing resistance

• Low tractive force onto the patient connection

• Efficient protection of the airways from negative influences

of cold, dry air

AEROvent® - Bacterial and viral filters | Ventilation filters

Electrostatic bacterial and viral filters for ventilation or rather the protection of the ventilation device. Available with or without Luer-Lock

port for CO2 measuring. These compact „slimline“ filters are outstanding because of their combination of low weight and high efficiency.

AEROvent® - KN-TS

• Humidity output: 27 mg at VT 500 ml

• Tidal volume range (VT): > 25 ml



• ISO connection: 15F

• Weight: 5 g

• Media: foam

AEROvent® - KN-TT• Humidity output: 23.4 mg at VT 500 ml

• Tidal volume range (VT): > 25 ml


• Deadspace: 11 ml

• ISO connection: 15F

• Weight: 5 g

• Media: folded paper

AEROvent® - BFS and BFLS• Filtration efficiency: BFE / VFE - 99.999 %




• ISO connection: 22M/15F - 22F/15M

• Weight: 25 g

• Housing: polypropylene

Advantages• Lightweight - low tractive force onto the patient

connection

• Very low deadspace - minimizes the threat of

rebreathing

• Transparent - easy visualization of potential

blockades

• Approven efficiency - independently tested, highly

efficient filtration performance

4

* integrated mouth piece

Device protection filters for suction devices• Media: hydrophobic PTFE-membrane

• Filtration efficiency: BFE / VFE - 99.9999 %

• Filtration ability: 0.027 µm

• Housing: styrolux (clear)

*


AEROvent® - Bacterial and viral filters | Device protection filters

Bacterial and viral filters for a reliable protection against infection and contamination of medical devices. Various device protection filters have

been designed for the different requirements within ventilation, aerosol- and oxygen therapy, spirometry and suction.

Device protection filter for spirometersAEROvent® - SGM• Type: electrostatic

• Filtration efficiency: BFE - 99.9999 % | VFE - 99.999 %

• Flow resistance: 0.25/0.51/0.78 mBar at 30/60/90 l/min


• Connection: 29.25 mm ID

34 mm OD

• Weight: 37 g


Device protection filter for ultrasonic nebulizers and ventilation devicesAEROvent® - BFMG• Type: electrostatic

• Filtration efficiency: BFE - 99.999 % | VFE - 99.99 %

• Filtration ability: 0.027 µm

• Flow resistance: 0.51 mBar at 30 l/min | 1.08 mBar at 60 l/min

• ISO connection: 22F - 22M

• Weight: 23.5 g

• Housing: styrene (clear)

AEROvent® - AF2-K-HFHousing: Ø 90 mm

Connection: 11 mm conical

Max. flow: 50 - 60 l/min

AEROvent® - AF2-KHousing: Ø 64 mm

Connection: 11 mm conical

Effective filtration area: 24.6 cm2

Max. flow: 40 l/min

AEROvent® - AF1-KHousing: Ø 64 mm

Connection: 5 - 9.5 mm stepped

Effective filtration area: 24.6 cm2

Max. flow: 30 l/min

5

Life expectancy

of up to 2 years

Device intake filters for oxygen concentrators | HEPA-filtersHEPA-filters (High Efficiency Particulate Air Filter) for nearly every established oxygen concentrator. The high flow, the

low resistance as well as the high efficiency against particles qualify the intake filters particularly for the use in oxygen

concentrators. The long life filters are as well made for a longer life expectancy compared to the „regular intake filters“.

AEROvent® - Intake A• Filtration efficiency: BFE / VFE - 99.9999 %

• Max. flow: 100 l/min

• Flow resistance: 0.32 mBar at 10 l/min

• ISO connection: 22M - 22F

• Housing: K-Resin

AEROvent® - Intake• Filtration efficiency: BFE / VFE - 99.9999 %



• ISO connection: 22M - 22F


AEROvent® - Intake LL Long-Life-Filter

• Filtration efficiency: BFE / VFE - 99.999+ %



• ISO connection: 22M

• Housing: Terlux

AEROvent® - Intake R-EFIntake Filter for EverFlo oxygen concentrator

• Filtration efficiency: BFE / VFE - 99.999+ %



• Connection: 12.72 mm

• Housing: styrene-butadiene copolymer

6Foam filter


Silencer for

AEROvent® - Intake

Bacterial outlet filter for oxygen concentratorsAEROvent® - BAF• Filtration efficiency: BFE / VFE - 99.999 %

• Connection: 3 mm - 6 mm, conical (both sides)


Device filters for oxygen concentratorsAEROvent® - Fine and Foam

The filters that are different for each device previously filter rough particles out of the air. The

partially used felt discs and silencers are used directly infront of the intake filter.

Fine filters / felt discs for oxygen concentrators

Manufacturer Device

Air Sep NewLife/Oxybox 6005

DeVilbiss / Pari Compact 5 and Oximobil

NPB and Euros - Linde Heimox Companion 590/590i

Orthopedia Oxy-Top 5

Rhönmed / Medicap RC 5 and Precise 6000

AIROX Legendair

Foam filters and silencers for oxygen concentrators

Manufacturer Device

Air Sep NewLife/Oxybox 6005

DeVilbiss / Pari MC 29 | MC 44 | Compact 5 | Compact 525

Dräger Silent Care

Invacare Perfect O2 | Mobilaire 5 | 5 SensO2

Platinum S | Platinum 9

Kröber AEROPLUS 6 | Kröber O2 | AEROPLUS 5

Respironics EverFlo | Millenium M5

Löwenstein Medical Technology (Weinmann)

Oxymat 3

7

Foam filter

Bacterial outlet filterIntake filter

Filter exchange sets for oxygen concentratorsIn addition to the separate filters we also offer you a wide range of filter exchange sets. These can include intake and outlet

filters, fine and foam filters, as well as adapters, depending on the device.

Examples of filter setsFor Millenium M5 (Respironics) For Kröber O2, Kröber 4.0

Intake filter

Silencer

Device filters for CPAP- and homecare devicesAEROvent® - Fine and Foam

High quality processed foam and fine filters made of high grade materials, such as ultrasonically welded fine filters or with carbon fibers

crossed surfaces, contribute to a safe respiratory therapy.

Manufacturer Device

Covidien Sandman Info

DeVilbiss Horizon, Sleep Cube

Fisher & Paykel HC230/HC600

Hoffrichter Trend | Calypso | Vector II

Resmed S7 | S8 | S9

Respironics REMstar Pro / Plus | Nova | Phoenix | Phoenix C-Flex | Synchrony II + Harmony II

REMstar M | C-Flex | Somnia 2 | Phönix 2

Löwenstein Medical

Technology

(Weinmann)

Prisma | SomnoComfort 2 | Somnosoft 2 | SomnoBalance

SomnoComfort | SomnoVent S / St and SomnoSmart 2

and many more

Further filter sets are available for the following manufacturer‘s devices:

• Resmed • Weinmann • Invacare • DeVilbiss and many more

AEROvent®

HUM Gesellschaft für Homecareund Medizintechnik mbH Zum Pier 79 | D-44536 LünenFON +49 (0)2 31/ 88 08 85-0 | FAX +49 (0)2 31/ 88 08 85-58Mail: [email protected] | http://www.hum-online.de

Delivery programme - Bacterial and Viral Filters

AEROvent® - Filters for ventilation | device protection

Bacterial- / Viral- / Device protection filters (electrostatic filters, single packed)

Item No. Description

HBF02-HFLS AEROvent® - HFLS, HME Bacterial and viral filter, with CO2-Port, ISO connection: 22M/15F- 22F/15M, filtration efficiency: BFE / VFE 99.999 % | Weight: 23 g

HBF01-HFLP AEROvent® - HFLP, HME Bacterial and viral filter, with CO2-Port, ISO connection: 22M/15F- 15M, filtration efficiency: BFE / VFE 99.999 % | Weight: 18 g

HBF01-HFLN AEROvent® - HFLN, HME Bacterial and viral filter, with CO2-Port, ISO connection: 15F - 15M/8.5M, filtration efficiency: BFE / VFE 99.999 % | Weight: 9 g

HBF01-BFS AEROvent® - BFS Bacterial and viral filter, without CO2-Port, ISO connection: 22M/15F - 22F/15M, filtration efficiency: BFE / VFE 99.999% | Weight 23 g

HBF01-BFLS AEROvent® - BFLS Bacterial and viral filter, with CO2-Port, ISO connection: 22M/15F - 22F/15M, filtration efficiency: BFE / VFE 99.999% | Weight 23 g

HBF01-BFMG AEROvent® - BFMG Bacterial and viral filter, without CO2-Port, ISO connection: 22F - 22M filtration efficiency: BFE 99.999% / VFE 99.99% | Weight 23.5 g

Artificial noses (Heat and moisture exchangers, single packed)

HBF01-KN-TS AEROvent® - ISO connection 15 F, with suction port and O2-connection

HBF01-KN-TT AEROvent® - ISO connection 15 F, folded paper membrane

Spirometry filter

HSF01-SGM AEROvent® - GM Bacterial and viral filter for spirometers, with integrated mouth piece, filtration efficiency: BFE - 99.9999 % | VFE - 99.999% , Weight: 37 g

AEROvent® - Device protection filters

Device protection filters for suction devices (hydrophobic PTFE-membrane)


HAF01-K AEROvent® - Suction filter, 6.4 cm Ø, connection: 5 - 9.5 mm stepped (both sides)

HAF02-K AEROvent® - Suction filter, 6.4 cm Ø, connection: 11 mm conical (both sides)

HAF02-K-HF AEROvent® - Suction filter, 9 cm Ø, connection: 11 mm conical (both sides)

Intake and outlet filters for oxygen concentrators


HBAF01-K AEROvent® - BAF Bacterial and viral outlet filter, 5.3 cm Ø, with 3 - 6 mm connections (for all types of oxygen concentrators)

HGF01-INTAKE AEROvent® - Intake, Bacterial and viral outlet filter, ISO-Connection 22F/22M (for all types of oxygen concentrators)

HGF11-INTAKE AEROvent® - Intake A, Bacterial and viral outlet filter, ISO-Connection 22F/22M (for all types of oxygen concentrators)

HGF02-INTAKE AEROvent® - Intake LL, Device protection/device intake filter, bacterial and viralfilter with big filter surface, ISO-Connection 22M, life expactancy up to 2 years

HGF01-R-EF AEROvent® - Foam R-EF, Air intake filter, foam filter for EverFlo Cabinet

HGF02-INTAKE-R-EF AEROvent® - Device protection filter, intake filter, mechanical bacterial and viral filter, filtration efficiency: 99.999+ %, single packed, for Respironics EverFlo oxygen concentrator

Felt discs and foam filters for oxygen concentrators as well as foam and fine filters for CPAP and homecare devices are available for the following manufacturer´s devices:

• Resmed • Respironics • Weinmann • Invacare • DeVilbiss • Kröber and many more

AEROvent® - Filter

ID 3664864 Rev. 7.0 | 09.11.2018

Changes and errors reserved. Illustrations are approximate.

© HUM Gesellschaft für Homecare und Medizintechnik mbH

Documents

AERvent - HUM GmbH...For Millenium M5 (Respironics) For Kröber O2, Kröber 4.0 Intake filter Silencer Device filters for CPAP- and homecare devices AEROvent® - Fine and Foam High