5
AFROSS (PTY) LTD GAS PIPELINE INSTALLATIONS & SERVICES Medical, Laboratories & Inert Gasses REG: SAQCC GAS 24 HOURS – MAURICE 082 444 6374

AFROSS Profile - Nuwe

Embed Size (px)

Citation preview

Page 1: AFROSS Profile - Nuwe

AFROSS (PTY) LTD

GAS PIPELINE INSTALLATIONS

& SERVICES

Medical, Laboratories & Inert Gasses

REG: SAQCC GAS

24 HOURS – MAURICE 082 444 6374

Page 2: AFROSS Profile - Nuwe

AFROSS GAS INSTALLATIONS (Pty) LtdMedical, Laboratories & all Inert Gas lines

VAT: 4860263559

REG: 2013/102733/07

EMAIL: [email protected]

CELL: 082 444 6374

To Whom It May Concern:

I would hereby like to provide my services to you company in a good and respectful

way & I will serve your company in the BEST way of Service and Proudness as I

possibly can.

Please see below References:

The Owner of AFROSS has been fully trained by AFROX CES for more than 36

years as a Medical Gas Pipe Line Installer.

As attached is his service record of 21 years (Certificate).

A Copy of his SAQCC Gas License.

He is fully registered, has Workman’s Compensation & a Letter of Good

Standing.

Scope of work:

Installation of all copper medical gas line.

Installations of any medical gas equipment, valve housing, vacuum traps,

valve boxes, scavenger systems, gas manifolds, compressors & vacuum

pumps.

Above include services as well.

Mr. M.S. Patterson

Page 3: AFROSS Profile - Nuwe

AFROSS GAS PIPELINE INSTALLATIONS

Page 4: AFROSS Profile - Nuwe

AFROSS GAS INSTALLATIONS (Pty) LtdMedical, Laboratories & all Inert Gas lines

VAT: 4860263559

REG: 2013/102733/07

EMAIL: [email protected]

CELL: 082 444 6374

CUSTOMER MAINTENANCE PLAN & SCOPE:

1. Check all leaks in gas room, contact gauges and alarm systems.

2. Clean plant rooms & check switch covers of compressor and vacuum pumps

plus filters, auto drains, oil and also for leaks.

3. Leaks on valve housing, flow meters and pressure ratings.

4. Clean out vacuum traps and valve boxes.

5. Theaters – Check flow rate on scavenger system and all leaks on housings.

6. Test all valve boxes for installation.

7. All gas room and plant rooms connections.

If more requirements are needed or requested by the Customer / Client, completed

with a report.