Agilent E5071C ENA Network Analyzer · Data Sheet. 2 Table of Contents ... This document provides technical specifications for the E5071C ENA network analyzer and the E5092A multiport

E5071C ENA Network Analyzer • 9kHzto4.5/6.5/8.5GHz • 100kHzto4.5/6.5/8.5GHz(withbiastees) • 300kHzto14/20GHz(withbiastees)

E5092A Configurable Multiport Test Set

Agilent

DataSheet

2

Table of ContentsOptions ....................................................................................................................... 3

Definitions................................................................................................................. 4Boundary Conditions............................................................................................. 4Corrected System Performance ...................................................................... 5 Systemdynamicrange........................................................................................... 5 Correctedsystemperformancewithcalibrationkit .............................................7

Uncorrected System Performance................................................................13Test Port Output (Source).................................................................................14 Testportoutputfrequency ..................................................................................14 Testportoutputpower ........................................................................................15 Testportoutputsignalpurity...............................................................................17

Test Port Input ......................................................................................................18 Testportinputlevels ...........................................................................................18 Testportinput(compression)..............................................................................20 Testportinput(tracenoise)................................................................................21 Testportinput(stability) .....................................................................................23 Testportinput(dynamicaccuracy).....................................................................24 Testportinput(groupdelay)...............................................................................26

General Information ...........................................................................................28 Systembandwidths .............................................................................................28 Frontpanelinformation .......................................................................................28 Rearpanelinformation ........................................................................................29 LXIcompliance ....................................................................................................31 EMC,safetyandenvironment .............................................................................32 Analyzerenvironmentalspecificationsanddimensions.....................................33

Measurement Throughput Summary ..........................................................37 Cycletimeformeasurementcompletion(ms)...................................................37 Cycletime(ms)vs.numberofpoints.................................................................42 Cycletime(ms)vs.IFbandwidth........................................................................43 CycleTime(ms)vsRFRangeFixedMode.........................................................44 Datatransfertime(ms).......................................................................................45

E5092A Configurable Multiport Test Set ....................................................46 Testsetinput/outputperformance .....................................................................46 OptionE5092A-020portperformance..................................................................46 Controlline...........................................................................................................48 DCsource.............................................................................................................48 Operatingstorageenvironment..........................................................................48 Non-operatingstorageenvironment...................................................................48 Frontpanelinformation.......................................................................................49 Rearpanelinformation........................................................................................49 Testsetdimensionsandblockdiagram..............................................................49

Corrected System Performance for 75 Ω Measurements with 11852B 50 to 75 Ω Minimum-Loss Pads .........................................53

3

OptionsThisdocumentprovidestechnicalspecificationsfortheE5071CENAnetworkanalyzerandtheE5092Amultiporttestset.

E5071C-230 2-porttestset,9kHzto3GHzwithoutbiastees(Discontinued)E5071C-235 2-porttestset,100kHzto3GHzwithbiastees(Discontinued)E5071C-240 2-porttestset,9kHzto4.5GHzwithoutbiasteesE5071C-245 2-porttestset,100kHzto4.5GHzwithbiasteesE5071C-260 2-porttestset,9kHzto6.5GHzwithoutbiasteesE5071C-265 2-porttestset,100kHzto6.5GHzwithbiasteesE5071C-280 2-porttestset,9kHzto8.5GHzwithoutbiasteesE5071C-285 2-porttestset,100kHzto8.5GHzwithbiasteesE5071C-430 4-porttestset,9kHzto3GHzwithoutbiastees(Discontinued)E5071C-435 4-porttestset,100kHzto3GHzwithbiastees(Discontinued)E5071C-440 4-porttestset,9kHzto4.5GHzwithoutbiasteesE5071C-445 4-porttestset,100kHzto4.5GHzwithbiasteesE5071C-460 4-porttestset,9kHzto6.5GHzwithoutbiasteesE5071C-465 4-porttestset,100kHzto6.5GHzwithbiasteesE5071C-480 4-porttestset,9kHzto8.5GHzwithoutbiasteesE5071C-485 4-porttestset,100kHzto8.5GHzwithbiasteesE5071C-2D5 2-porttestset,300kHzto14GHzwithbiasteesE5071C-4D5 4-porttestset,300kHzto14GHzwithbiasteesE5071C-2K5 2-porttestset,300kHzto20GHzwithbiasteesE5071C-4K5 4-porttestset,300kHzto20GHzwithbiasteesE5092A Configurablemultiporttestset

Calibration kits and ECal modulesThisE5071CdatasheetalsoprovidestechnicalspecificationsforthefollowingcalibrationkitsandECalmodules.Formodelsnotlistedinthisdatasheet,pleasedownloadthefreeUncertaintyCalculatorfromwww.agilent.com/find/na_calculatortogeneratethecurvesforyourcalibrationkit.

85032F Calibrationkit85033E Calibrationkit85052D Calibrationkit85092C Electroniccalibration(ECal)module85093C Electroniccalibration(ECal)moduleN4691B Electroniccalibration(ECal)module

4

DefinitionsSpecification (spec.): Warrantedperformance.Allspecificationsapplyat23ºC(±5ºC),unlessotherwisestated,and90minutesaftertheinstrumenthasbeenturnedon.Specificationsincludeguardbandstoaccountfortheexpectedstatisticalperformancedistribution,measurementuncertainties,andchangesinperformanceduetoenvironmentalconditions.

Supplementalinformationisintendedtoprovideinformationthatishelpfulforusingtheinstrumentbutthatisnotguaranteedbytheproductwarranty.

Typical (typ.): Describesperformancethatwillbemetbyaminimumof80%ofallproducts.Itisnotguaranteedbytheproductwarranty.

Supplemental performance data (SPD): Supplementalperformancedatarepresentsthevalueofaparameterthatis mostlikelytooccur;theexpectedmeanoraverage.Itisnotguaranteedbytheproductwarranty.

General characteristics: Ageneral,descriptivetermthatdoesnotimplyalevelofperformance.

Note:ThespecificationsinthisdatasheetalsoapplytotheE5071CEPENAnetworkanalyzerexpressconfiguration.FormoreinformationabouttheExpressENA,visitwww.agilent.com/find/express-e5071c

Boundary ConditionsInthisdatasheet,boundaryconditionsaregivenforthespecifications.Forexample,systemdynamicrangeis98dBwiththefollowingboundaryconditions.

Option: 485 Frequency: 10MHz IF bandwidth:3kHz

Ifthesameboundaryconditionsfallundermorethanonecategoryinatable,applythebestvalue.

5

Corrected System PerformanceThespecificationsinthissectionapplytomeasurementsmadewiththeAgilentE5071Cnetworkanalyzerunderthefollowingconditions:• Noaveragingappliedtodata• Environmentaltemperatureof23°C(±5°C)withlessthan1°Cdeviation fromthecalibrationtemperature• Responseandisolationcalibrationperformed• RFRangeFixedMode:OFF

System dynamic range

Table 1. Option230/235/240/245/260/265/280/285/430/435/440/445/460/465/480/485Description Specification SPDSystem dynamic range1, 2, 3

9kHzto300kHz 72dB300kHzto10MHz IFbandwidth=3kHz 82dB10MHzto6GHz 98dB6GHzto8.5GHz 92dB

9kHzto300kHz 97dB 115dB300kHzto10MHz 107dB 115dB10MHzto6GHz IFbandwidth=10Hz 123dB 130dB6GHzto7GHz 117dB 128dB7GHzto8GHz 117dB 126dB8GHzto8.5GHz 117dB 124dB

Figure 1. System dynamic range (specification and actual measurement data example, IF bandwidth 10 Hz)

80

90

100

110

120

130

140

150

160

1.E+05 1.E+09 2.E+09 3.E+09 4.E+09 5.E+09 6.E+09 7.E+09 8.E+09

Test frequency [Hz]

Syst

em d

ynam

ic ra

nge

[dB]

E5071C specification

1. Thetestportdynamicrangeiscalculatedasthedifferencebetweenthetestportrmsnoisefloor andthesourcemaximumoutputpower.Theeffectivedynamicrangemusttakemeasurement uncertaintyandinterferingsignalsintoaccount.2. Thespecificationmightnotbemetat5MHzor50MHz.3. SystemDynamicRangemaybedegradedby10dBwhenRFRangeFixedModeisON.

6

System dynamic range (continued)

Table 2.Option2D5/2K5/4D5/4K5

Description Specification SPDSystem dynamic range1, 2

300kHzto1MHz

IFbandwidth=3kHz

70dB

1MHzto10MHz 82dB10MHzto100MHz 95dB100MHzto6GHz 98dB6GHzto8.5GHz 92dB8.5GHzto10.5GHz 80dB10.5GHzto15GHz 75dB15GHzto20GHz 71dB300kHzto1MHz

IFbandwidth=10Hz

95dB 105dB1MHzto10MHz 107dB 115dB

10MHzto100MHz 120dB 129dB100MHzto6GHz 123dB 130dB6GHzto8GHz 117dB 129dB8GHzto8.5GHz 117dB 127dB8.5GHzto10.5GHz 105dB 115dB10.5GHzto15GHz 100dB 111dB15GHzto20GHz 96dB 105dB

Figure 2. System dynamic range (specification and actual measurement data example, IF bandwidth 10 Hz)

1. Thetestportdynamicrangeiscalculatedasthedifferencebetweenthetestport’srmsnoise floorandthesource’smaximumoutputpower.Effectivedynamicrangemusttakemeasurement uncertaintyandinterferingsignalsintoaccount.2. Thespecificationmightnotbemetat5MHzor50MHz.

Frequency [Hz]

Syst

em dy

nam

ic ra

nge[

dB]

E5071C-2D5/2K5/4D5/4K5 specification

0.0E+00 5.0E+09 1.0E+10 1.5E+10 2.0E+1080

90

100

110

120

130

140

150

160

7

Corrected system performance with calibration kit

Option 230/235/240/245/260/265/280/285/430/435/440/445/460/465/480/485

Table 3. Correctedsystemperformancewithtype-Ndeviceconnectors,85032FcalibrationkitNetwork analyzer: E5071C Calibration kit: 85032F (Type-N, 50 Ω)Calibration: full 2-port

IF bandwidth = 10 Hz, no averaging applied to data, environmental temperature = 23 °C (±5 °C ) with < 1 °C deviation from calibration temperature, isolation calibration performed

Description

Specification (dB)9 kHz to 300 kHz

300 kHz to 10 MHz

10 MHz to 3 GHz

3 GHz to 6 GHz

6 GHz to 8.5 GHz

Directivity 49 49 46 40 38Sourcematch 41 41 40 36 35Loadmatch 49 49 46 40 37Reflectiontracking ±0.011 ±0.011 ±0.021 ±0.032 ±0.054Transmissiontracking ±0.027 ±0.015 ±0.018 ±0.056 ±0.088

Transmission uncertainty (specification)

Reflection uncertainty (specification)

8

Table 4.Correctedsystemperformancewithtype-Ndeviceconnectors,85092Celectroniccalibration(ECal)module

Network analyzer: E5071CCalibration module: 85092C (Type-N, 50 Ω) Electronic calibration (ECal) moduleCalibration: full 2-port

IF bandwidth = 10 Hz, no averaging applied to data, environmental temperature = 23 °C (±5 °C ) with < 1 °C deviation from calibration temperature , isolation calibration is not performed

Description

Specification (dB)300 kHz to 10 MHz

10 MHz to 3 GHz

3 GHz to 6 GHz

6 GHz to 8.5 GHz

Directivity 45 54 52 47Sourcematch 36 44 41 36Loadmatch 41 47 44 39Reflectiontracking ±0.100 ±0.040 ±0.060 ±0.070Transmissiontracking ±0.055 ±0.039 ±0.068 ±0.136



9

Table 5.Correctedsystemperformancewith3.5mmdeviceconnectortype,85033Ecalibrationkit Network analyzer: E5071CCalibration kit: 85033E (3.5 mm, 50 Ω)Calibration: full 2-port


Description


300 kHz to 10 MHz

10 MHz to 3 GHz

3 GHz to 6 GHz

6 GHz to 8.5 GHz

Directivity 46 46 44 38 38Sourcematch 43 43 40 37 36Loadmatch 46 46 44 38 38Reflectiontracking ±0.006 ±0.006 ±0.007 ±0.009 ±0.010Transmissiontracking ±0.026 ±0.015 ±0.020 ±0.058 ±0.079



10

Table 6. Correctedsystemperformancewith3.5mmdeviceconnectortype,85093Celectroniccalibration(ECal)module

Network analyzer: E5071CCalibration module: 85093C (3.5 mm, 50 Ω) electronic calibration (ECal) moduleCalibration: full 2-port

IF bandwidth = 10 Hz, no averaging applied to data, environmental temperature = 23 °C (±5 °C ) with < 1 °C deviation from calibration temperature, isolation calibration is not performed

Description


10 MHz to 3 GHz

3 GHz to 6 GHz

6 GHz to 8.5 GHz




11

Option 2D5/2K5/4D5/4K5

Table 7. Correctedsystemperformancewith3.5mmdeviceconnectors,85052Dcalibrationkit

Network analyzer: E5071C Calibration kit: 85052D (3.5 mm, 50 Ω)Calibration: full 2-port


Description


500 MHz to 2 GHz

2 GHz to 6 GHz

6 GHz to 20 GHz




0 .01

0 .1

1

10

-90-80-70-60-50-40-30-20-10010

3 0 0 K Hz to 5 0 0 M Hz5 0 0 M Hz to 2 G Hz2 G Hz to 6 G Hz6 G Hz to 2 0 G Hz

S11 = S22 = 0; Cal power = -10 dBm; Meas power = -10 dBm

Unc

erta

inty

(dB

)

Transmission Coefficient (dB)

Magnitude

0 .1

1

10

100

-90-80-70-60-50-40-30-20-10010

3 0 0 K Hz to 5 0 0 M Hz

5 0 0 M Hz to 2 G Hz

2 G Hz to 6 G Hz

6 G Hz to 2 0 G Hz

S11 = S22 = 0; Cal power = -10 dBm; Meas power = -10 dBm

Phase

Unce

rtain

ty (D

egre

es)

T rans mis s ion C oeffic ient (dB )

0

0 .01

0 .02

0 .03

0 .04

0 .05

0 0 .2 0 .4 0 .6 0 .8 1

Unce

rtain

ty (li

near

)

Reflection coefficient (linear)

Magnitude

3 0 0 K Hz to 5 0 0 MHz, 5 0 0 MHz to 2 G Hz

2 G Hz to 6 G Hz

6 G Hz to 2 0 G Hz

S2 1 = S1 2 = 0 ; Cal power = -10 dBm; Meas power = -10 dBm0

2

4

6

8

10

0 0 .2 0 .4 0 .6 0 .8 1

Unce

rtain

ty (d

egre

es)


Phase

3 0 0 K Hz to 5 0 0 MHz, 5 0 0 MHz to 2 G Hz

2 G Hz to 6 G Hz

6 G Hz to 2 0 G Hz

S2 1 = S1 2 = 0 ; Cal power = -10 dBm; Meas power = -10 dBm

12

Table 8. Correctedsystemperformancewith3.5mmdeviceconnectors,N4691Belectroniccalibration(ECal)module Network analyzer: E5071CCalibration module: N4691B (3.5 mm, 50 Ω) electronic calibration (ECal) moduleCalibration: full 2-port

IF bandwidth = 10 Hz, no averaging applied to data, environmental temperature = 23 °C (±5 °C ) with < 1 °C deviation from calibration temperature, isolation calibration is not performed

Description

Specification (dB)10 MHz to 500 MHz

500 MHz to 2 GHz

2 GHz to6 GHz

6 GHz to 20 GHz




0

0 .01

0 .02

0 .03

0 .04

0 .05

0 0 .2 0 .4 0 .6 0 .8 1

Unce

rtain

ty (li

near

)


Magnitude

1 0 MHz to 5 0 0 MHz

5 0 0 MHz to 2 G Hz

2 G Hz to 6 G Hz

6 G Hz to 2 0 G Hz


0

2

4

6

8

10

0 0 .2 0 .4 0 .6 0 .8 1

Unce

rtain

ty (d

egre

es)


Phase

1 0 MHz to 5 0 0 MHz5 0 0 MHz to 2 G Hz2 G Hz to 6 G Hz6 G Hz to 2 0 G Hz


1 0 M Hz to 5 0 0 M Hz5 0 0 M Hz to 2 G Hz2 G Hz to 6 G Hz6 G Hz to 2 0 G Hz

S 11 = S 22 = 0 ; Cal power = -10 dBm; Meas power = -10dBm0 .01

0 .1

1

10

-90-80-70-60-50-40-30-20-10010

Unce

rtain

ty (d

B)

Transmission coefficient (dB)

Magnitude

1 0 M Hz to 5 0 0 M Hz5 0 0 M Hz to 2 G Hz2 G Hz to 6 G Hz6 G Hz to 2 0 G Hz

S 11 = S 22 = 0 ; Cal power = -10 dBm; Meas power = -10dBm0 .1

1

10

100

-90-80-70-60-50-40-30-20-10010

Unce

rtain

ty (D

egre

es)


Phase

13

Uncorrected System Performance1

Table 9. Option230/235/240/245/260/265/280/285/430/435/440/445/460/465/480/485

User correction: OFF, system correction: ON

Description


300 kHz to 3 GHz

3 GHz to 6 GHz

6 GHzto 8.5 GHz

Directivity 20dB 25dB 20dB 15dBSourcematch 20dB 25dB 20dB 15dBLoadmatch2 12dB 17dB 12dB 10dBTransmissiontracking3 ±1.5dB ±1.0dB ±1.0dB ±1.0dBReflectiontracking ±1.5dB ±1.0dB ±1.0dB ±1.0dB

Table 10. Option2D5/2K5/4D5/4K5

User correction: OFF, system correction: ON

Description


1 MHz to 1 GHz

1 GHz to 3 GHz

3 GHz to6 GHz

6 GHz to 8.5 GHz

8.5 GHz to 11 GHz

11 GHz to 20 GHz

Directivity 20dB 25dB 25dB 20dB 15dB 15dB 15dBSourcematch 20dB 25dB 25dB 20dB 15dB 15dB 15dBLoadmatch 9dB 17dB 15dB 11dB 9dB 8dB 7dBTransmissiontracking

±1.0dB ±1.0dB ±1.0dB ±1.0dB ±1.0dB ±1.0dB ±1.0dB

Reflectiontracking

±1.0dB ±1.0dB ±1.0dB ±1.0dB ±1.0dB ±1.0dB ±1.0dB

1. ThespecificationmightnotbemetwhenShiftLOModeisON.2. Loadmatchmaybedegradedby3dBwhenRFRangeFixedModeisON.3. Transmissiontrackingmaybedegradedby±4dBwhenRFRangeFixedModeisON.

14

Test Port Output (Source)Test port output frequency

Table 11. Option230/235/240/245/260/265/280/285/430/435/440/445/460/465/480/485/2D5/2K5/4D5/4K5

Description Specification TypicalFrequencyrangeOption230/430 Option240/440Option260/460 Option280/480 Option235/435 Option245/445Option265/465 Option285/485Option2D5/4D5 Option2K5/4K5

9kHzto3GHz 9kHzto4.5GHz9kHzto6.5GHz 9kHzto8.5GHz 100kHzto3GHz 100kHzto4.5GHz100kHzto6.5GHz 100kHzto8.5GHz300kHzto14GHz 300kHzto20GHz

Resolution 1Hz

SourcestabilitystandardOption1E5

±7ppm(5to40ºC) ±0.05ppm(5to40ºC),±0.5ppm/year

CWaccuracystandardOption1E5

±7ppm±0.45ppm(SerialNumberPrefixMY463/SG463andabove)±1ppm(SerialNumberPrefixMY462/SG462andbelow)

15

Test port output power1

Table 12.Option230/235/240/245/260/265/280/285/430/435/440/445/460/465/480/485

Description Specification TypicalNominalpower (presetpower) 0dBm

Levelaccuracy2,6 (steppedsweepmode)

±0.650dB(at0dBm,50MHzabsolute) ±1.0dB

Levelaccuracy2 (sweptsweepmode) ±2.5dB

Levellinearity3,5,6 (steppedsweepmode) 9kHzto5GHz 5GHzto6GHz 6GHzto7GHz 7GHzto8.5GHz

±0.75dB(–20to10dBm) ±0.75dB(–20to9dBm) ±0.75dB(–20to8dBm) ±0.75dB(–20to7dBm)

Levellinearity5(sweptsweepmode)4 9kHzto5GHz 5GHzto6GHz 6GHzto7GHz 7GHzto8.5GHz

±1.5dB(at–20to10dBm) ±1.5dB(at–20to9dBm) ±1.5dB(at–20to8dBm) ±1.5dB(at–20to7dBm)

Range5,6 9kHzto5GHz 5GHzto6GHz 6GHzto7GHz 7GHzto8.5GHz

–55to10dBm –55to9dBm –55to8dBm –55to7dBm

Sweeprange5,6 9kHzto5GHz 5GHzto6GHz6GHzto7GHz7GHzto8.5GHz

–55to10dBm –55to9dBm –55to8dBm –55to7dBm

Levelresolution 0.05dB

Description Specification SPDMaxleveledpower5,6 (Option230/235/240/245/260/ 265/280/285) 9kHzto8.5GHz

(Option430/435/440/445/460/ 465/480/485) 9kHzto6GHz 6GHzto7GHz 7GHzto8.5GHz

10dBm

10dBm 9dBm 8dBm

1. Sourceoutputperformanceonport1only.Otherportoutputperformanceistypical.2. Levelaccuracyistakenat0dBm,relativeto50MHzreferenceunlessotherwisestated.3. Levellinearitygivenisrelativeto0dBm.4. Thespecificationmightnotbemetat5MHzor50MHz.5. Thelevelaccuracyspecificationneedstobetakenintoaccountfortestportoutputpowerlevel.6. Powercalibrationusinganexternalpowermeterimproveslevelaccuracyofthetestportoutputpower. Properpowermeters/sensors,andthe82357BUSB-GPIBinterfacearerequiredtoconductpowercalibration.

16

Test port output power7 (continued)

Table 13. Option2D5/2K5/4D5/4K5Description Specification TypicalNominalpower(presetpower) –5dBmLevelaccuracy6 (steppedsweepmode)1 300kHzto1MHz1MHzto5MHz 5MHzto8.5GHz 8.5GHzto20GHz

±0.650dB(at–5dBm,50MHzabsolute) +2.0dB,–6.0dB±2.0dB ±1.0dB ±2.5dB

Levelaccuracy(sweptsweepmode)2300kHzto1GHz 1GHzto8.5GHz 8.5GHzto20GHz

±5.0dB ±2.5dB +5.0dB,–7.0dB

Levellinearity5,6 (steppedsweepmode)3 300kHzto1MHz 1MHzto6GHz 6GHzto8GHz 8GHzto10.5GHz10.5GHzto15GHz 15GHzto20GHz

±0.75dB(–25to8dBm) ±0.75dB(–25to10dBm) ±0.75dB(–25to9dBm) ±0.75dB(–25to7dBm) ±0.75dB(–25to3dBm)±0.75dB(–25to0dBm)

Levellinearity5 (sweptsweepmode)3 300kHzto1MHz 1MHzto6GHz 6GHzto8GHz 8GHzto10.5GHz 10.5GHzto15GHz 15GHzto20GHz

±1.5dB(–25to8dBm) ±1.5dB(–25to10dBm) ±1.5dB(–25to9dBm) ±1.5dB(–25to7dBm) ±1.5dB(–25to3dBm) ±1.5dB(–25to0dBm)

Range5,6 300kHzto1MHz 1MHzto6GHz 6GHzto8GHz 8GHzto10.5GHz 10.5GHzto15GHz 15GHzto20GHz

–85to8dBm –85to10dBm –85to9dBm –85to7dBm –85to3dBm –85to0dBm

Sweeprange4,5,6 300kHzto1MHz 1MHzto6GHz 6GHzto8GHz 8GHzto10.5GHz 10.5GHzto15GHz 15GHzto20GHz(Sourceattenuator=0dB)

–25to8dBm –25to10dBm –25to9dBm –25to7dBm –25to3dBm –25to0dBm

Levelresolution 0.05dB

1. Levelaccuracyistakenat–5dBm,relativeto50MHzreferenceunlessotherwisestated.2. Levelaccuracyistakenat–5dBm,relativeto50MHzreference.3. Levellinearitygivenisrelativeto–5dBm.4. Thesweeprangeshiftsbasedontheselectedsourceattenuatorvalue(0dBto60dB,10dBstep).5. Thelevelaccuracyspecificationneedstobetakenintoaccountfortestportoutputpowerlevel.6. Powercalibrationusinganexternalpowermeterimproveslevelaccuracyofthetestportoutputpower. Properpowermeters/sensors,andthe82357BUSB-GPIBinterfacearerequiredtoconductpowercalibration.7. Sourceoutputperformanceonport1only.Otherportoutputperformanceistypical.

17

Test port output power6 (continued)


Description Specification SPDMaxleveledpower3,4300kHzto1MHz 1MHzto10GHz 10GHzto13GHz 13GHzto15GHz 15GHzto18GHz 18GHzto20GHz

9dBm10dBm 9dBm 7dBm 5dBm 4dBm

Test port output signal purity

Table 14.Option230/235/240/245/260/265/280/285/430/435/440/445/460/465/480/485

Description Specification TypicalHarmonics(2ndor3rd) 9kHzto2GHz 2GHzto8.5GHz

<–25dBc(at5dBm) <–20dBc(at5dBm)

Non-harmonicspurious9kHzto8.5GHz

<–30dBc(at5dBm)


Description Specification TypicalHarmonics(2ndto5th)1 300kHzto1GHz 1GHzto20GHz

< –12dBc(atmaximumoutputpower)5 < –15dBc(atmaximumoutputpower)5

Non-harmonicspurious2 300kHzto20GHz

< –30dBc(at–5dBm)

1. Thisincludes6thand7thharmonicswhenthetestfrequencyisfrom1MHzto1GHz.2. Thecarrier±1/8thspuriousisexcludedfrom8.76GHzto17.52GHz.3. Thelevelaccuracyspecificationneedstobetakenintoaccountfortestportoutputpowerlevel.4. Powercalibrationusinganexternalpowermeterimproveslevelaccuracyofthetestportoutputpower. Properpowermeters/sensors,andthe82357BUSB-GPIBinterfacearerequiredtoconductpowercalibration.5. Maximumoutputpoweristhemaximumpowerof"Range"inTable13Testportoutputpower.6. Sourceoutputperformanceonport1only.Otherportoutputperformanceistypical.

18

Test Port Input

Test port input levels

Table 16. Option230/235/240/245/260/265/280/285/430/435/440/445/460/465/480/485

Description Specification TypicalMaximum test port input level

9kHzto8.5GHz +10dBmDamage level9kHzto8.5GHz +26dBm

±35VDCCrosstalk1, 2

9kHzto300kHz 300kHzto10MHz 10MHzto3GHz 3GHzto6GHz 6GHzto8.5GHz

–100dB –110dB –120dB –110dB –100dB

Description Specification SPDTest port noise floor3

9kHzto300kHz300kHzto10MHz10MHzto5GHz5GHzto6GHz6GHzto7GHz7GHzto8GHz8GHzto8.5GHz

–97dBm/Hz–107dBm/Hz–123dBm/Hz–124dBm/Hz–119dBm/Hz–120dBm/Hz–120dBm/Hz

–115dBm/Hz–115dBm/Hz–130dBm/Hz–131dBm/Hz–130dBm/Hz–129dBm/Hz–127dBm/Hz

1. Thespecificationmightnotbemetat5MHzor50MHz.2. Crosstalkmaybedegradedby10dBwhenRFRangeFixedModeisON.3. Testportnoisefloormaybedegradedby10dBwhenRFRangeFixedModeisON.

19

Test port input levels (continued)


Description Specification TypicalMaximum test port input level

300kHzto20GHz +10dBm

Damage level300kHzto20GHz +26dBm

or±35VDCCrosstalk1

300kHzto1MHz 1MHzto5MHz 5MHzto10MHz 10MHzto45MHz 45MHzto4GHz 4GHzto6GHz 6GHzto8.5GHz 8.5GHzto15GHz 15GHzto20GHz

–68dB –70dB –100dB –110dB –118dB –123dB –120dB –112dB –106dB

Description Specification SPDTest port noise floor300kHzto1MHz1MHzto10MHz10MHzto100MHz100MHzto6GHz6GHzto8GHz8GHzto8.5GHz8.5GHzto10.5GHz10.5GHzto15GHz15GHzto20GHz

–97dBm/Hz–107dBm/Hz–120dBm/Hz–123dBm/Hz–118dBm/Hz–120dBm/Hz–108dBm/Hz–107dBm/Hz–106dBm/Hz

–110dBm/Hz–115dBm/Hz–129dBm/Hz–130dBm/Hz–130dBm/Hz–130dBm/Hz–120dBm/Hz–120dBm/Hz–119dBm/Hz

1. Thespecificationmightnotbemetat5MHzor50MHz.

20

Test port input (compression level)

Table 18. Option230/235/240/245/260/265/280/285/430/435/440/ 445/460/465/480/485

Description Specification SPD

Compression levelMagnitude9kHzto5GHz 5GHzto8.5GHz(maximumtestportinputlevel=+10dBm)

0.08dB 0.1dB

Phase9kHzto3GHz3GHzto5GHz5GHzto8.5GHz(maximumtestportinputlevel=+10dBm)

0.3deg0.6deg1.0deg



Compression levelMagnitude300kHzto10MHz10MHzto10GHz10GHzto15GHz15GHzto20GHz(maximumtestportinputlevel=+10dBm)

0.3dB0.182dB0.712dB1.87dB

Phase300kHzto5GHz5GHzto10GHz10GHzto15GHz15GHzto20GHz(maximumtestportinputlevel=+10dBm)

2.3deg4.3deg17.3deg20.3deg

21

Test port input (trace noise)

Table 20. Option230/235/240/245/260/265/280/285/430/435/440/445/460/465/480/485

Description Specification3 SPD

Trace noise magnitude1

9kHzto30kHz(IFBW=3kHz) 0.004dBrms 0.001dBrms30kHzto100kHz(IFBW=3kHz) 0.003dBrms 0.001dBrms100kHzto10MHz(IFBW=3kHz) 0.003dBrms 0.0005dBrms10MHzto4.38GHz(IFBW=10kHz) 0.0005dBrms4.38GHzto8.5GHz(IFBW=10kHz) 0.0006dBrms10MHzto4.38GHz(IFBW=70kHz) 0.004dBrms

(Reflection)0.001dBrms

0.003dBrms(Transmission)

4.38GHzto5GHz(IFBW=70kHz) 0.006dBrms 0.0012dBrms5GHzto6GHz(IFBW=70kHz) 0.006dBrms 0.0012dBrms6GHzto7GHz(IFBW=70kHz) 0.006dBrms 0.0012dBrms7GHzto8.5GHz(IFBW=70kHz)(atmaximumoutputpowerlevelofsweeprange)

0.006dBrms 0.0012dBrms

Trace noise phase2

9kHzto30kHz(IFBW=3kHz) 0.035degrms30kHzto10MHz(IFBW=3kHz) 0.020degrms10MHzto4.38GHz(IFBW=70kHz) 0.035degrms4.38GHzto5GHz(IFBW=70kHz) 0.050degrms5GHzto6GHz(IFBW=70kHz) 0.050degrms6GHzto7GHz(IFBW=70kHz) 0.050degrms7GHzto8.5GHz(IFBW=70kHz) (atmaximumoutputpowerlevelofsweeprange)

0.050degrms

1. Thespecificationmightnotbemetatthefollowingfrequencies:333.333kHz,406.25kHz, 857.143kHz,928.571kHz,1.3MHz,2.4MHzand4.333333MHz.2. Thespecificationmightnotbemetat5MHzor50MHz.3. WhenRFRangeFixedModeisON,multiplyby2.3.

22

Test port input (trace noise) (continued)



Trace noise magnitude1, 3

300kHzto1MHz(IFBW=3kHz)1MHzto10MHz(IFBW=3kHz)10MHzto4.38GHz(IFBW=70kHz) 4.38GHzto8.5GHz(IFBW=70kHz) 8.5GHzto13.137GHz(IFBW=70kHz) 13.137GHzto17GHz(IFBW=70kHz) 17GHzto20GHz(IFBW=70kHz)(atmaximumoutputpowerlevelofsweeprange)

0.006dBrms0.003dBrms0.004dBrms 0.006dBrms 0.009dBrms 0.013dBrms 0.023dBrms

0.0009dBrms 0.0005dBrms 0.0010dBrms 0.0012dBrms 0.0024dBrms 0.0040dBrms 0.0065dBrms

Trace noise phase2, 3

300kHzto1MHz(IFBW=3kHz) 1MHzto10MHz(IFBW=3kHz) 10MHzto4.38GHz(IFBW=70kHz) 4.38GHzto8.5GHz(IFBW=70kHz) 8.5GHzto13.137GHz(IFBW=70kHz) 13.137GHzto17GHz(IFBW=70kHz) 17GHzto20GHz(IFBW=70kHz)(atmaximumoutputpowerlevelofsweeprange)

0.040degrms 0.020degrms 0.035degrms 0.050degrms 0.064degrms 0.095degrms 0.165degrms

0.0120degrms 0.0025degrms 0.0075degrms 0.0150degrms 0.0250degrms 0.0320degrms 0.0520degrms

1. Thespecificationmightnotbemetatthefollowingfrequencies:406.25kHz,666.667kHz, 722.222kHz,857.143kHz,928.571kHz,1.444444MHz,1.714286MHz,1.8MHz,1.857143MHz, 1.95MHz,2.4375MHz,2.571429MHz,3.714286MHz,4.8MHz,5MHz,5.416667MHz, 7.583333MHz,10MHz,10.833333MHz,12.5MHz.2. Thespecificationmightnotbemetat5MHzor50MHz.3. TracenoiseSPDisdefinedwithtransmissionmeasurementsonly.

23

Test port input (stability)1

Table 22.Option230/235/240/245/260/265/280/285/430/435/440/445/460/465/480/485

Description Specification SPDStability magnitude

9kHzto3GHz ±0.005dB/°C3GHzto6GHz ±0.01dB/°C6GHzto8.5GHz ±0.04dB/°C

Stability phase9kHzto3GHz ±0.1deg/°C3GHzto6GHz ±0.2deg/°C6GHzto8.5GHz ±0.8deg/°C


Description Specification SPDStability magnitude300kHzto3GHz 3GHzto6GHz 6GHzto20GHz

±0.005dB/°C ±0.01dB/°C ±0.04dB/°C

Stability phase300kHzto3GHz 3GHzto6GHz 6GHzto20GHz

±0.1deg/°C ±0.2deg/°C ±0.8deg/°C

1. Stabilityisdefinedasaratiomeasurementatthetestport.

24

Test port input (dynamic accuracy)1, 2

Table 24.Option230/235/240/245/260/265/280/285/430/435/440/445/460/465/480/485

Accuracy of the test port input power reading is relative to –10 dBm reference input power level.Description Specification TypicalDynamic accuracy magnitude10dBm ±0.207dB–30dBm ±0.045dB–100dBm ±2.00dB–110dBm ±3.0dBDynamic accuracy phase10dBm ±5.03deg–30dBm ±0.30deg–100dBm ±15.0deg

Specification

±3.0 dB (at –110 dBm, Ref.= –10 dBm, typical)

0.01

0.1

1

10

-100-90-80-70-60-50-40-30-20-10010

Accu

racy (

dB)

Test port power (dBm)

Magnitude

Accu

racy (

deg)


Phase

0.1

1

10

100

-100-90-80-70-60-50-40-30-20-10010

1. Dynamicaccuracyisverifiedwiththefollowingmeasurements: • compressionoverfrequency • IFlinearityattwofrequencies(1MHzand1.195GHz)usingareferencelevelof–10dBmfor aninputpowerrangeof0to–100dBm.Forvaluebelow–60dBm,referto"VNAReceiver DynamicAccuracySpecificationsandUncertaintiesN5247-90003" http://cp.literature.agilent.com/litweb/pdf/N5247-90003.pdf2. RFRangeFixedModeisOFF

25

Test port input (dynamic accuracy)1 (continued)

Table 25. Option2D5/2K5/4D5/4K5Accuracy of the test port input power reading is relative to –10 dBm reference input power level.

Description Specification TypicalDynamic accuracy magnitude10dBm ±2.49dB–30dBm ±0.046dB–100dBm ±2.00dB–110dBm ±3.0dBDynamic accuracy phase10dBm ±20.6deg–30dBm ±0.30deg–100dBm ±15.0deg

Specification

±3.0 dB (at –110 dBm, Ref.= –10 dBm, typical)


Accu

racy

(dB)

Magnitude

0.01

0.1

1

10

-100-90-80-70-60-50-40-30-20-10010


Accu

racy

(deg

)

Phase

0.1

1

10

100

-100-90-80-70-60-50-40-30-20-10010

1. Dynamicaccuracyisverifiedwiththefollowingmeasurements: • compressionoverfrequency • IFlinearityattwofrequencies(1MHzand1.195GHz)usingareferencelevelof-10dBmfor aninputpowerrangeof0to-60dBm.Forvaluebelow-60dBm,referto"VNAReceiver DynamicAccuracySpecificationsandUncertaintiesN5247-90003" http://cp.literature.agilent.com/litweb/pdf/N5247-90003.pdf.

26

Test port input (group delay)1

Table 26.Option230/235/240/245/260/265/280/285/430/435/440/445/460/465/480/485

Description Specification Supplemental informationAperture(selectable) (frequencyspan)/(number

ofpoints-1)Maximumaperture 25%offrequencyspanMinimumdelay Limitedtomeasuringnomore

than180°ofphasechangewithintheminimumaperture.

Accuracy Seegraphbelow,typical

Thefollowinggraphshowsgroupdelayaccuracywithtype-Nconnectors,full2-portcalibrationanda10HzIFbandwidth,RFRangeFixedMode:OFF

Calibrationkit(85032F).Insertionlossisassumedtobe<2dB.

Ingeneral,thefollowingformulacanbeusedtodeterminetheaccuracy,inseconds,ofaspecificgroupdelaymeasurement:±phaseaccuracy(degrees)/[360xaperture(Hz)]

Accu

racy

(nSe

c)

Aperture (MHz)

0.01 0.1 1 10 100

100

10

1

0.1

0.01

0.001

C al pow er = -10 dBm ; M eas pow er = -10 dBm ; E lectrica l Length = 10 m

Frequency = 1 G H z

1. Groupdelayiscomputedbymeasuringthephasechangewithinaspecifiedstep (determinedbythefrequencyspanandthenumberofpointspersweep).

27

Test port input (group delay)1 (continued)


Description Specification Supplemental informationAperture(selectable) (frequencyspan)/(number

ofpoints-1)Maximumaperture 25%offrequencyspanMinimumdelay Limitedtomeasuringnomore

than180°ofphasechangewithintheminimumaperture.

Accuracy Seegraphbelow,typical

Thefollowinggraphshowsgroupdelayaccuracywith3.5mm(male)connectors,full2-portcalibrationanda10HzIFbandwidth.

Calibrationkit(85052D).Insertionlossisassumedtobe<2dB.

Ingeneral,thefollowingformulacanbeusedtodeterminetheaccuracy,inseconds,ofaspecificgroupdelaymeasurement:±phaseaccuracy(degrees)/[360xaperture(Hz)]

C al pow er = -10 dBm ; M eas pow er = -10 dBm ; E lectrica l Length = 10 m

Frequency = 1 G H z

Accu

racy

(nSe

c)

Aperture (MHz)

0 .001

0 .01

0 .1

1

10

100

0.01 0 .1 1 10 100

1. Groupdelayiscomputedbymeasuringthephasechangewithinaspecifiedstep (determinedbythefrequencyspanandthenumberofpointspersweep).

28

General Information

Table 28. Systembandwidth

Description General characteristicsIFbandwidthsettingsRange 10Hzto1.5MHz

Nominalsettingsare: 10,15,20,30,40,50,70,100,150,200,300,400,500,700,1k,1.5k,2k,3k,4k,5k,7k,10k,15k,20k,30k,40k,50k,70k,100k,150k,200k,300k,400k,500kHz,700kHz,1MHz, 1.5MHz

Table 29. Frontpanelinformation

Description Typical General characteristicsRF connectorsOption230/235/240/245/260/265/280/285/430/435/440/445/460/465/480/485 Option2D5/2K5/4D5/4K5

Type-N,female,50Ω

3.5mm(male),50ΩnominalProbe powerConnector 3terminalconnectorx2Voltage&maximumcurrent

+15V±2%(400mA) –12.6V±5%(300mA) (Combinedloadforbothprobeconnections)

DisplayType 10.4inTFTcolorLCD

withtouchscreenResolution XGA(1024x768)1

1. Validpixelsare99.99%andmore.Below0.01%(approx.30points)offixedpointsofblack, blue,greenorredarenotregardedasfailure.

29

Table 30. Rearpanelinformation

Description Typical General characteristicsExternal trigger input connectorType BNC,female

Inputlevel Lowthresholdvoltage:0.5VHighthresholdvoltage:2.1VInputlevelrange:0to+5V

Pulsewidth ≥2μsecPolarity Positiveornegative

External trigger output connectorType BNC,femaleMaximumoutputcurrent 50mAOutputlevel Lowlevelvoltage:0V

Highlevelvoltage:5VPulsewidth 1μsecPolarity PositiveornegativeExternal reference signal input connector

Type BNC,femaleInputfrequency 10MHz±10ppmInputlevel –3to+10dBm

Internal reference signal output connectorType BNC,femaleOutputfrequency 10MHz±7ppmSignaltype SinewaveOutputlevel 0dBm±3dBinto50ΩOutputimpedance 50Ω

Internal reference signal oven connectorType BNC,femaleOutputfrequency 10MHz±1ppmOutputlevel 0dBmminimum

30

Table 31. Rearpanelinformation (continued)

Description Typical General characteristicsBias tee input connectorType BNC,female(foreachport)Maximumvoltage ±35VDCMaximumcurrent(nodegradationinRFspecifications) ±200mAMaximumcurrent(damagelevel) ±500mA

Fuse 500mA,bi-pinstyle

Video output 15-pinminiD-Sub;female;drivesXGAcompatiblemonitors

GPIB 24-pinD-Sub(TypeD-24),female;compatiblewithIEEE-488interfacespeci-ficationisdesignedtobeusedinenvironmentwhereelectricalnoiseisrelativelylow.LANorUSBTMCinter-faceisrecommendedtouseatthehigherelectricalnoiseenvironment.

USB-host portUniversalserialbusjack,TypeAconfiguration(4contactsinline,contact1onleft);female;providesconnectiontoprinter,ECalmodule,USB/GPIBinterfaceormultiporttestset

Contact1 Vcc:4.75to5.25VDC,500mA,maximum

Contact2 –DataContact3 +DataContact4 GroundUSB (USBTMC1) interface port

Universalserialbusjack,TypeBconfiguration(4contactsinline);female;providesconnectiontoanexternalPC;compatiblewithUSBTMC-USB488andUSB2.0.

LAN 10/100/1000BaseTEther-net,8-pinconfiguration;autoselectsbetweenthetwodatarates

Handler I/O port 36-pincentronics,female;providesconnectiontohandlersystem

31

Description Typical General characteristics

Line power2

Frequency 47Hzto63HzVoltage 90-264VAC(Vpeak>120V)

VAmax 350VAmax.

PowerConsumptionOption230/235/240/245/260/265/280/285Option430/435/440/445/460/465/480/485Option2D5/2K5Option4D5/4K5

130W(SPD)155W(SPD)160W(SPD)185W(SPD)

Description Specification General characteristicsAUX input connectorType BNC,femalex2Inputrange ±1Vor±10VselectableAccuracy 1%+1mVfor±1Vinput

1%+10mVfor±10Vinput

Table 33. LXIcompliance

Description General characteristics

ClassC(onlyappliestounitsthatareshippedwithfirmwarerevisionA.08.00orlater)

Table 32. Rearpanelinformation (continued)

1. USBTestandMeasurementClass(TMC)interfacethatcommunicatesoverUSB,complyingwith theIEEE488.1andIEEE488.2standards.2. Athird-wiregroundisrequired.

32

Table 34. EMC,safetyandenvironment

Description General characteristicsEMC

EuropeanCouncilDirective2004/108/EC IEC61326-1:2005 EN61326-1:2006CISPR11:2003+A1:2004 EN55011:2007 Group1,ClassA IEC61000-4-2:1995+A2:2000 EN61000-4-2:1995+A2:2001 4kVCD/8kVAD IEC61000-4-3:2006 EN61000-4-3:2006 1-3V/m,80-1000MHz/1.4GHz-2.7GHz,80%AM IEC61000-4-4:2004 EN61000-4-4:2004 1kVpowerlines/0.5kVsignallines IEC61000-4-5:2005 EN61000-4-5:2006 0.5kVline-line/1kVline-ground IEC61000-4-6:2003+A1:2004+A2:2006 EN61000-4-6:2007 3V,0.15-80MHz,80%AM IEC61000-4-11:2004 EN61000-4-11:2004 0.5-300cycle,0%/70%

ICES-001:2006Group1,ClassA

AS/NZSCISPR11:2004Group1,ClassA

SafetyEuropeanCouncilDirective2006/95/EC IEC61010-1:2001/EN61010-1:2001 MeasurementCategoryI PollutionDegree2 IndoorUseCAN/CSAC22.2No.61010-1-04 MeasurementCategoryI PollutionDegree2 IndoorUse

EnvironmentThisproductcomplieswiththeWEEEDirective(2002/96/EC)markingrequirements.Theaffixedlabelindicatesthatyoumustnotdiscardthiselectrical/electronicproductindomestichouseholdwaste.ProductCategory:WithreferencetotheequipmenttypesintheWEEEDirectiveAnnexI,thisproductisclassedasa“MonitoringandControlinstrumentation”product.Donotdisposeindomestichouseholdwaste.Toreturnunwantedproducts,contactyourlocalAgilentoffice,orseewww.agilent.com/environment/product/formoreinformation.

33

Table 35.Analyzerenvironmentalspecificationsanddimensions

Description General characteristicsOperating environmentTemperature +5°Cto+40°C

Error-correctedtemperaturerange 23°C(±5°C)with<1°CdeviationfromcalibrationtemperatureHumidity 20%to80%atwetbulbtemperature<+29°C(non-condensation)

Altitude 0to2,000m(0to6561feet)

Vibration 0.21Gmaximum,5Hzto500Hz

Non-Operating storage environmentTemperature –10°Cto+60°C

Humidity 20%to90%atwetbulbtemperature<+40°C(non-condensation)

Altitude 0to4572m(0to15,000feet)Vibration 0.5Gmaximum,5Hzto500HzDimensions Seenextpage.Weight (net)Option230/240/260/280(2-port) Option235/245/265/285(2-port) Option430/480/440/460(4-port) Option435/445/465/485(4-port) Option2D5/2K5(2-port) Option4D5/4K5(4-port)

18.2kg 18.3kg 19.9kg 20.0kg 19.8kg 21.8kg

34

Figure 3. Dimensions (front view, E5071C with Option 230/235/240/245/260/265/280/285, in millimeters)

Figure 4. Dimensions (front view, E5071C with Option 430/435/440/445/460/465/480/485, in millimeters)

426

58 20 51 122 3727

222

221922

426

58 20 51 41 41 41 3727

222

221922

35

426

58 20 51 122 3727

222

261922

Figure 5. Dimensions (front view, E5071C with Option 2D5/2K5, in millimeters)

Figure 6. Dimensions (front view, E5071C with Option 4D5/4K5, in millimeters)

36

Figure 7. Dimensions (rear view with Option 1E5, in millimeters)

Figure 8. Dimensions (side view, E5071C Option 230/235/240/245/260/265/280/285/430/435/440/445/460/465/480/485, in millimeters)

Figure 9. Dimensions (side view, E5071C with Option 2D5/2K5/4D5/4K5, in millimeters)

1821

5

15

235

1322

2

47241732 23.4

482196422426

128

16729225

252525

22

2558

144 159 17

9 190217

64109147

25 25

47232 417 23

14

215

18

222

1323

5

37

Measurement Throughput Summary1, 2

Cycle time for measurement completion (ms)

Table 36. Option240/245/260/265/280/285/440/445/460/465/480/485

Sweep mode: Swept, analyzer display turned off with: DISP:ENAB OFF, number of traces = 1, system error correction: OFF

Number of points51 201 401 1601

Start 1 GHz, stop 1.2 GHz, 500 kHz IF bandwidthUncorrected 4 5 7 172-portcal 6 9 12 334-portcal 12 17 24 66Start 1 GHz, stop 1.2 GHz, 100 kHz IF bandwidthUncorrected 4 5 7 192-portcal 7 9 13 374-portcal 12 18 26 73Start 1 GHz, stop 1.2 GHz, 1 kHz IF bandwidthUncorrected 53 200 395 15622-portcal 106 400 790 31234-portcal 211 799 1579 6245Start 100 kHz, stop 4.5 GHz, 500 kHz IF bandwidthUncorrected 11 13 14 232-portcal 20 25 27 454-portcal 40 49 53 95Start 100 kHz, stop 4.5 GHz, 100 kHz IF bandwidthUncorrected 11 13 14 252-portcal 21 25 27 494-portcal 40 50 54 102Start 100 kHz, stop 4.5 GHz, 1 kHz IF bandwidthUncorrected 56 205 402 15812-portcal 111 409 804 31624-portcal 222 818 1608 6323

1. Supplementalperformancedata. 2. MeasuredwithfirmwareversionA.11.0xwithserialnumberprefixMY463.

38

Start 100 kHz, stop 8.5 GHz, 500 kHz IF bandwidthUncorrected 14 18 19 232-portcal 28 35 37 454-portcal 55 69 74 90Start 100 kHz, stop 8.5 GHz, 100 kHz IF bandwidth

Uncorrected 14 18 19 252-portcal 28 35 37 494-portcal 55 69 74 98Start 100 kHz, stop 8.5 GHz, 1 kHz IF bandwidthUncorrected 56 205 403 15812-portcal 112 410 805 31624-portcal 224 820 1609 6322

Number of points

51 201 401 1601Start 1 GHz, stop 1.2 GHz, 500 kHz IF bandwidthUncorrected 4 8 11 282-portcal 8 14 22 554-portcal 16 28 42 109Start 1 GHz, stop 1.2 GHz, 100 kHz IF bandwidthUncorrected 5 9 14 402-portcal 9 18 28 804-portcal 17 34 55 159Start 1 GHz, stop 1.2 GHz, 1 kHz IF bandwidthUncorrected 53 200 395 15622-portcal 106 400 790 31234-portcal 211 799 1579 6245Start 100 kHz, stop 4.5 GHz, 500 kHz IF bandwidthUncorrected 7 12 18 472-portcal 14 24 36 944-portcal 27 48 71 187

Table 37.Option240/245/260/265/280/285/440/445/460/465/480/485

Sweep mode: Stepped, analyzer display turned off with: DISP:ENAB OFF, number of traces = 1, system error correction: ON

39

Start 100 kHz, stop 4.5 GHz, 100 kHz IF bandwidthUncorrected 8 14 21 602-portcal 14 27 42 1184-portcal 28 54 83 236Start 100 kHz, stop 4.5 GHz, 1 kHz IF bandwidthUncorrected 56 205 403 15812-portcal 111 409 804 31624-portcal 222 818 1608 6323Start 100 kHz, stop 8.5 GHz, 500 kHz IF bandwidthUncorrected 8 13 19 472-portcal 14 25 36 944-portcal 28 49 72 187Start 100 kHz, stop 8.5 GHz, 100 kHz IF bandwidthUncorrected 8 14 22 592-portcal 15 28 43 1184-portcal 30 56 85 236Start 100 kHz, stop 8.5 GHz, 1 kHz IF bandwidthUncorrected 56 205 403 15812-portcal 112 410 805 31624-portcal 224 820 1609 6322

40


Sweep mode: Swept, analyzer display turned off with: DISP:ENAB OFF, number of traces = 1, system error correction: OFF

Number of Points51 201 401 1601

Start 11 GHz, stop 12 GHz, 500 kHz IF bandwidthUncorrected 3 3 5 152-portcal 6 6 9 294-portcal 10 11 18 65Start 11 GHz, stop 12 GHz, 100 kHz IF bandwidthUncorrected 3 3 5 172-portcal 6 6 10 334-portcal 11 12 20 71Start 11 GHz, stop 12 GHz, 1 kHz IF bandwidthUncorrected 52 199 395 15652-portcal 103 397 789 31284-portcal 205 794 1577 6256Start 8 GHz, stop 18 GHz, 500 kHz IF bandwidthUncorrected 17 21 22 222-portcal 33 42 43 444-portcal 66 82 85 88Start 8 GHz, stop 18 GHz, 100 kHz IF bandwidthUncorrected 17 21 22 242-portcal 34 42 43 474-portcal 67 83 86 93Start 8 GHz, stop 18 GHz, 1 kHz IF bandwidthUncorrected 57 206 403 15812-portcal 114 411 805 31624-portcal 227 822 1610 6323Start 300 kHz, stop 20 GHz, 500 kHz IF bandwidthUncorrected 22 36 39 432-portcal 44 71 77 844-portcal 88 141 153 168Start 300 kHz, stop 20 GHz, 100 kHz IF bandwidthUncorrected 23 36 39 432-portcal 45 71 78 854-portcal 89 142 154 169Start 300 kHz, stop 20 GHz, 1 kHz IF bandwidthUncorrected 60 210 408 15902-portcal 118 420 816 31794-portcal 236 839 1630 6357

41


Sweep mode: Stepped, analyzer display turned off with: DISP:ENAB OFF, number of traces = 1, system error correction: ON

Number of Points51 201 401 1601

Start 11 GHz, stop 12 GHz, 500 kHz IF bandwidthUncorrected 3 6 11 312-portcal 5 12 20 614-portcal 10 24 40 120Start 11 GHz, stop 12 GHz, 100 kHz IF bandwidthUncorrected 3 8 14 432-portcal 6 15 26 854-portcal 11 30 52 170Start 11 GHz, stop 12 GHz, 1 kHz IF bandwidthUncorrected 52 199 395 15652-portcal 103 397 789 31284-portcal 205 794 1577 6256Start 8 GHz, stop 18 GHz, 500 kHz IF bandwidthUncorrected 9 13 19 472-portcal 16 26 37 944-portcal 32 51 73 187Start 8 GHz, stop 18 GHz, 100 kHz IF bandwidthUncorrected 9 15 22 602-portcal 17 29 43 1184-portcal 33 58 86 236Start 8 GHz, stop 18 GHz, 1 kHz IF bandwidthUncorrected 57 206 403 15812-portcal 114 411 805 31624-portcal 227 822 1610 6323Start 300 kHz, stop 20 GHz, 500 kHz IF bandwidthUncorrected 11 18 24 562-portcal 21 35 47 1114-portcal 41 68 94 221Start 300 kHz, stop 20 GHz, 100 kHz IF bandwidthUncorrected 11 19 27 682-portcal 21 38 53 1354-portcal 42 74 106 270Start 300 kHz, stop 20 GHz, 1 kHz IF bandwidthUncorrected 60 210 408 15902-portcal 118 420 816 31794-portcal 236 839 1630 6357

42

Cycle time (ms) vs. number of points

Table 40. Option240/245/260/265/280/285/440/445/460/465/480/485

Start 1 GHz, stop 1.2 GHz, 500 kHz IF bandwidth, error correction: OFF, display update: OFF, number of traces = 1

Number of points Sweep mode: Swept, System error correction: OFF

Sweep mode: Stepped, System error correction: ON

51 4 4201 5 8401 7 111601 17 28


Start 11 GHz, stop 12 GHz, 500 kHz IF bandwidth, error correction: OFF, display update: OFF, number of traces = 1

Number of points Sweep mode: Swept, System error correction: OFF

Sweep mode: Stepped, System error correction: ON

51 3 3201 3 6401 5 111601 15 31

43

Cycle time (ms) vs. IF bandwidth

Table 42.240/245/260/265/280/285/440/445/460/465/480/485

Sweep mode: Swept, analyzer display turned off with: DISP: ENAB OFF, number of traces = 1, system error correction: OFF, Frequency = 4 GHz, NOP = 201

IF BW [Hz]

Cycle time [ms]

IF BW [Hz]

Cycle time [ms]

IF BW [Hz]

Cycle time [ms]

IF BW [kHz]

Cycle time [ms]

IF BW [kHz]

Cycle time [ms]

IF BW [kHz]

Cycle time [ms]

10 19300 100 1933 1000 196 10 22 100 5 1000 515 12868 150 1290 1500 132 15 16 150 5 1500 520 9652 200 968 2000 100 20 13 200 530 6436 300 647 3000 68 30 9 300 540 4827 400 486 4000 52 40 8 400 550 3863 500 389 5000 42 50 7 500 570 2737 700 277 7000 30 70 6 700 5


Sweep mode: Swept, analyzer display turned off with: DISP: ENAB OFF, number of traces = 1, system error correction: OFF, Frequency = 10 GHz, NOP = 201

IF BW [Hz]

Cycle time [ms]

IF BW [Hz]

Cycle time [ms]

IF BW [Hz]

Cycle time [ms]

IF BW [kHz]

Cycle time [ms]

IF BW [kHz]

Cycle time [ms]

IF BW [kHz]

Cycle time [ms]

10 19328 100 1931 1000 194 10 20 100 3 1000 315 12890 150 1288 1500 130 15 14 150 3 1500 320 9670 200 966 2000 98 20 11 200 330 6448 300 645 3000 66 30 7 300 340 4836 400 484 4000 50 40 6 400 350 3868 500 387 5000 40 50 5 500 370 2737 700 275 7000 28 70 4 700 3

44

Cycle time (ms) vs. RF Range Fixed Mode

Table 44. Option230/235/240/245/260/265/280/285/430/435/440/445/460/465/480/485

Sweep mode: Swept, analyzer display turned off with: DISP:ENAB OFF,number of traces = 1, system error correction: OFF, Start 1 GHz, stop 1.2 GHz, 500 kHz IF bandwidth


RF Range Fixed Mode: ON Uncorrected 2 3 5 152-portcal 2 5 8 294-portcal 4 9 16 58RF Range Fixed Mode: OFFUncorrected 4 5 7 172-portcal 6 9 12 334-portcal 12 17 24 66

Sweep mode: Swept, analyzer display turned off with: DISP:ENAB OFF, number of traces = 1, system error correction: OFF, Start 1 GHz, stop 1.2 GHz, 100 kHz IF bandwidth


RF Range Fixed Mode: ONUncorrected 2 3 5 172-portcal 3 5 9 334-portcal 4 10 18 65RF Range Fixed Mode: OFFUncorrected 4 5 7 192-portcal 7 9 13 374-portcal 12 18 26 73

45

Data transfer time (ms)1, 2

Table 45. Alloptions


SCPI over GPIB3

64-bitfloatingpoint 4 12 22 8432-bitfloatingpoint 3 6 12 43ASCII 25 98 196 773SCPI over 1 Gbps LAN (Socket)3

REAL64 1 1 1 2REAL32 1 1 1 2ASCII 15 55 108 432SCPI over 1 Gbps LAN (SICL-LAN)3

REAL64 3 3 3 5REAL32 3 3 3 4ASCII 3 5 9 28SCPI over USB (SICL-USB)3

REAL64 2 2 2 3REAL32 2 2 2 3ASCII 2 6 12 43SCPI over GPIB/USB (82357B)REAL64 8 15 24 81REAL32 6 10 15 43ASCII 74 282 561 2240COM4

Varianttype 1 1 1 1

1. Supplementalperformancedata.2. MeasuredwithfirmwareversionA.11.00withserialnumberprefixMY463. 3. MeasuredusingaVEEPro7.0programrunningona3.2GHzPentium4DELLPrecision370, TransferredcomplexS11data,using:CALC1-36:DATA:FDAT?.4. MeasuredusinganE5071CVBAmacrorunninginsidetheanalyzer.TransferredcomplexS11data.

46

E5092A Configurable multiport test setThesectionprovidestestinput/outputperformancewithoutcalibrationbytheE5071C.

Table 46.Testsetinput/outputperformance

Description Specification TypicalFrequencyrange 50MHzto20GHz

Damagelevel 20dBm,±35VDC

Table 47. OptionE5092A-020portperformance

Description Specification TypicalLoad match (selected port)

SPDT switch1 50MHzto2GHz 2GHzto4GHz 4GHzto8GHz 8GHzto10GHz 10GHzto18GHz 18GHzto20GHz

17dB 11dB 8dB 7dB 4dB 4dB

SP4T switch2 50MHzto2GHz 2GHzto3GHz 3GHzto8GHz 8GHzto10GHz 10GHzto18GHz 18GHzto20GHz

17dB 11dB 8dB 7dB 4dB 4dB

Load match (unselected port)

SPDT switch1 50MHzto3GHz 3GHzto10GHz 10GHzto16GHz 16GHzto18GHz 18GHzto20GHz

17dB 11dB 8dB 6dB 4dB

SP4T switch2 50MHzto3GHz 3GHzto10GHz 10GHzto16GHz 16GHzto18GHz 18GHzto20GHz


1. SPDT:Single-pole-double-throwswitches.AppliestoSW5,SW6,SW7,SW8,SW9andSW10intheE5092A.(SeeFigure20.) 2. SP4T:Single-pole-four-throwswitches.AppliestoSW1,SW2,SW3andSW4intheE5092A.(SeeFigure20.)

47

Description Specification TypicalLoad match (common port)SPDT switch1 50MHzto2GHz 2GHzto4GHz 4GHzto8GHz 8GHzto10GHz 10GHzto20GHz


SP4T switch2 50MHzto1.3GHz 1.3GHzto4GHz 4GHzto8GHz 8GHzto10GHz 10GHzto20GHz


Insertion lossSPDT switch1 50MHzto100MHz 100MHzto2GHz 2GHzto3GHz 3GHzto4GHz 4GHzto6GHz 6GHzto8GHz 8GHzto10GHz 10GHzto14GHz 14GHzto18GHz 18GHzto20GHz

4dB 3.5dB 4.5dB 5dB 5.5dB 7dB 8dB 8.5dB 10dB 11.5dB

SP4T switch2 50to100MHz 100MHzto2GHz 2GHzto3GHz 3GHzto4GHz 4GHzto6GHz 6GHzto8GHz 8GHzto10GHz 10GHzto14GHz 14GHzto18GHz 18GHzto20GHz

4dB 3.5dB 4.5dB 5.5dB 6dB 7.5dB 8.5dB 9.5dB 10.5dB 12dB

Stability per switch Condition:EnviromentTemperature+23°C±3°CandInternalDCsource:≤100mA (Sumof4channels),noheatsourceandnowallclosetotheunit.50Mto4GHz4Gto12GHz12Gto20GHzCondition:besidestheabove50Mto4GHz4Gto12GHz12Gto20GHz

0.003dB/°C(SPD)0.005dB/°C(SPD)0.008dB/°C(SPD)

0.007dB/°C(SPD)0.012dB/°C(SPD)0.017dB/°C(SPD)

Isolation3 50MHzto500MHz 500MHzto1GHz 1GHzto2GHz 2GHzto6GHz 6GHzto10GHz 10GHzto18GHz 18GHzto20GHz

65dB 80dB 85dB 90dB 85dB 75dB 65dB(Overarbitrarilytestports)

Table 48.OptionE5092A-020portperformance(continued)

1. SPDT:Single-pole-double-throwswitches.AppliestoSW5,SW6,SW7,SW8,SW9andSW10intheE5092A.(SeeFigure20.) 2. SP4T:Single-pole-four-throwswitches.AppliestoSW1,SW2,SW3andSW4intheE5092A.(SeeFigure20.) 3. Thisspecificationisdefinedwhenallportsareterminatedwitha50ohmload.

48

Table 49. Controlline

Description Specification TypicalNumberofgroups 4

GroupA:8bitsGroupB,C,D:4bits

Inputvoltagerange1 0Vto+5V(positiveinput)–5Vto0V(negativeinput)

Maximumcurrent GroupA,B:50mAintotalofeachgroupGroupC,D:500uAintotalofeachgroup

Impedance GroupA,B:<10ohmGroupC,D:<200ohm

Table 50.DCsource

Description Specification Typical

Numberofsources 4

Outputvoltagerange 0Vto+5.2V(nominal)2

Outputvoltageaccuracy ±3%ofsetting(+1Vto+5V)at 1Mohmloadimpedance

Voltageresolution 10mV(nominal)3

Maximumcurrent 150mAforeachsource

Outputimpedance <5ohm

Table 51. Operatingstorageenvironment


Temperature +5°Cto+40°C

Humidity 20to80%atwetbulbtemperature<+29°C(non-condensing)

Altitude 0to2,000m(0to6,561feet)

Vibration 0.21Gmax.,5to500Hz

Table 52. Non-operatingstorageenvironment


Temperature –10°Cto+60°C

Humidity 20to90%atwetbulbtemperature<+40°C(non-condensing)

Altitude 0to4,572m(0to15,000feet)

Vibration 0.5Gmax.,5Hzto500Hz

1. Inputvoltagewillbeclippedatabout±5.2Vwhenoverthisrange. 2. Theoutputvoltagecanbesetinthisrange. 3. Theoutputvoltageresolutionbecomeseffectivebetween0Vto5.2V.

49

Table 53.Frontpanelinformation

Description General characteristicsRFconnectors SMA(Female)Testports 38portsControlline 15-pinD-sub,female

25-pinD-sub,female

Table 54.Rearpanelinformation

Description General characteristicsUSBport TypeB-receptacle,provide

connectiontotheE5071CLinepower1FrequencyVoltage

VAmax

47to63Hz90to132VAC,or198to264VAC(automaticallyswitched)300VAmax.

Table 55.Testsetdimensionsandblockdiagram

Description General characteristics Dimensions E5092AOption020 SeeFigures16,17,18and19 Weight E5092AOption020 9kg

Figure 10. Dimensions (front view, with Option E5092A-020, in millimeters, nominal)

426

129192

133

18

1. 1Athird-wiregroundisrequired.

50

Figure 11. Dimensions (pitch between switches, with Option E5092A-020, in millimeters, nominal)

Figure 12. Dimensions (rear view, with Option E5092A-020, in millimeters, nominal)

Figure 13. Dimensions (side view, with Option E5092A-020, in millimeters, nominal)

129 37

133

51

83

36.8

132.7

2

18.57

17

27

27

65.34

23.38

23.38

40.640.640.6

13.5 27 69.8

27

27

2727 27.8

146

1313

3

1812

614

4

47223 417 32 22

51

Figure 14. Switch configuration (E5092A-020)

Figure 15. DC control line (E5092A-020)

Control Line 1 (Group A)




Control Line 8 (Group A):

Control Line 2 (Group B)Control Line 3 (Group B)Control Line 4 (Group B)

Control Line 1 (Group B)

Control Line 1 (Group C)Control Line 2 (Group C)Control Line 3 (Group C)Control Line 4 (Group C)

Control Line 1 (Group D)Control Line 2 (Group D)Control Line 3 (Group D)Control Line 4 (Group D)

::

DC Source (Group A)Control Line 1 (Group A)

DC Source (Group B)

DC Source (Group C)

DC Source (Group D)

Control Line 2 (Group B)

Control Line 2 (Group C)

Control Line 2 (Group D)Positive Input (High)

Negative Input (Low)

Positive Input (High)


Positive Input (High)


DC Source Output

DC Source Output

DC Source Output

DC Source Output

ImpedanceNegative Input (Low)

Max Current Positive Input (High)

Output Impedance

Output Voltage

SW 6 6A 6B

6C O M

SW 7

7C O M

7A 7B SW 8 8A 8B

8C O M

SW 9

9C O M

9A 9B SW 1010A 10B

10C O M

SW 5 5A

5C O M

5B

SW 1

1A 1B 1C 1D

PO R T 1 SW 2

2A 2B 2C 2D

PO R T 2 SW 3

3A 3B 3C 3D

PO R T 3 SW 4

4A 4B 4C 4D

PO R T 4

52

D-SUB 25pin assignment

Line

4

Line

3

Line

2

Line

1

Line

4

Line

3

Line

2

Line

1

Posit

ive in

put

Posit

ive in

put

Nega

tive

inpu

t

GND

DC so

urce

GND

DC so

urce

23 22 21 20 19 18 1712

GND

Nega

tive

inpu

t

24

GND

2513 11 10 9 8 7 6 5

Line

4Ne

gativ

e in

put

164

Line

3Po

sitive

inpu

t

153

Line

2DC

sour

ce

142

Line

1

1

GROUP B GROUP C GROUP D

GROUP B GROUP C GROUP D

Line

8

Line

7

Line

6

Line

5

Line

4

Line

3

Line

2

Line1

GND

Rese

rved

DC so

urce

Posit

ive in

put

Nega

tive

inpu

t

Rese

rved

Rese

rved

15 14 13 12 11 10 98 7 6 5 4 3 2 1

GROUP A

GROUP A

D-SUB 15 pin assignment

Figure 16. Control line pin assignment (E5092A-020)

53

Option 230/235/240/245/260/265/280/285/430/435/440/445/ 460/465/480/485

Table 56. Correctedsystemperformancewithtype-N75Ωdeviceconnectors, 85036Ecalibrationkit

Network analyzer: E5071C calibration kit: 85036E (type-N 75 Ω) 50 to 75 Ω adapters: 11852B calibration: full 2-port

IF bandwidth = 10 Hz, no averaging applied to data, environmental temperature = 23 °C ±5 °C with < 1 °C deviation from calibration temperature, isolation calibration performed

Typical (dB)Description 10 MHz to 3 GHzDirectivity 37Sourcematch 33Loadmatch 39Reflectiontracking ±0.015Transmissiontracking ±0.019

10 MHz to 3 GHz

S11 = S22 = 0; Source power = –10 dBm

Transmission using 85036E and 11852B


10

1

0.1

0.01

Mag

(dB)

10 0 –10 –20 –30 –40 –50 –60 –70 –80 –90

10 MHz to 3 GHz


Transmission using 85036E and 11852B


100

10

1

0.1

Phas

e (d

eg)

10 0 –10 –20 –30 –40 –50 –60 –70 –80 –90

10 MHz to 3 GHz


Reflection using 85036E and 11852B


10

8

6

4

2

0

Phas

e (d

eg)

0 0.2 0.4 0.6 0.8 1

10 MHz to 3 GHz


Reflection using 85036E and 11852B


0.1

0.08

0.06

0.04

0.02

0

Mag

(lin

ear)

0 0.2 0.4 0.6 0.8 1

Transmissionuncertainty10MHzto3GHz(typical)

Reflectionuncertainty10MHzto3GHz(typical)

Magnitude Phase

Magnitude Phase

Corrected System Performance for 75 Ω Measurements with 11852B50 to 75 Ω Minimum-Loss Pads (Supplemental Information)

www.agilent.comwww.agilent.com/find/ena

www.lxistandard.orgLANeXtensionsforInstrumentsputsthepowerofEthernetandtheWebinsideyourtestsystems.AgilentisafoundingmemberoftheLXIconsortium.

Agilent Channel Partnerswww.agilent.com/find/channelpartnersGetthebestofbothworlds:Agilent’smeasurementexpertiseandproductbreadth,combinedwithchannel partnerconvenience.

www.agilent.com/find/myagilentApersonalizedviewintotheinformationmostrelevanttoyou.

myAgilentmyAgilent

www.agilent.com/quality

www.agilent.com/find/AdvantageServicesAccuratemeasurementsthroughoutthelifeofyourinstruments.

Agilent Advantage Services

Three-Year Warranty

www.agilent.com/find/ThreeYearWarrantyAgilent’scombinationofproductreliabilityandthree-yearwarrantycoverageisanotherwaywehelpyouachieveyourbusinessgoals:increasedconfidenceinuptime,reducedcostofownershipandgreaterconvenience.

FormoreinformationonAgilentTechnologies’products,applicationsorservices,pleasecontactyourlocalAgilentoffice.Thecompletelistisavailableat:www.agilent.com/find/contactus

Americas Canada (877)8944414Brazil (11)41973600Mexico 018005064800 UnitedStates (800)8294444

Asia Pacific Australia 1800629485China 8008100189HongKong 800938693India 1800112929Japan 0120(421)345Korea 0807690800Malaysia 1800888848Singapore 18003758100Taiwan 0800047866OtherAPCountries (65)3758100

Europe & Middle EastBelgium 32(0)24049340Denmark 4545801215Finland 358(0)108552100France 0825010700* *0.125€/minuteGermany 49(0)70314646333 Ireland 1890924204Israel 972-3-9288-504/544Italy 390292608484Netherlands 31(0)205472111Spain 34(91)6313300Sweden 0200-882255UnitedKingdom 44(0)1189276201Forotherunlistedcountries: www.agilent.com/find/contactus(BP-3-1-13)

Productspecificationsanddescriptionsinthisdocumentsubjecttochangewithoutnotice.

©AgilentTechnologies,Inc.2013PublishedinUSA,April5,20135989-5479EN

Documents

Agilent E5071C ENA Network Analyzer · Data Sheet. 2 Table of Contents ... This document provides technical specifications for the E5071C ENA network analyzer and the E5092A multiport