Agricultural Catalogue 2013 - Telehandler Centre · Agricultural Catalogue 2013 . Materials Handling Attachments ... Bucket Sweeper Unit PART number A0003 Bucket sweepers (fully galvanized,

Design & Manufacture of High Quality Attachments for Tractors, Telescopic Handlers, Skid Steer Loaders & Articulated Loaders

Agricultural Catalogue

2013

Materials Handling Attachments

Telescopic handlers,Forklifts,Tractor Loaders,Articulated loaders & Skid steer loaders

All attachments are purpose designed using the latest CAD technology. They are manufactured to the highest standards, resulting in robust attachments

that will see years of even the toughest use We manufacture attachments for:

Staffordshire Warehouse, Canal Road,Neath, West Glamorgan, UK. SA11 1LJTel: 01639 630587 Fax: 01639 633315

International Tel: +44 1639 630587 Fax +44 1639 633315

website: www.miniexcavatorcentre.come-mail: [email protected]

Evans & Reid Ltd

Page Number

Buckets for Materials Handler 1 to 3

Bucket Sweepers 4Sugar Beet Baskets for Materials Handlers 4

Rehandling Buckets With Curved Grapple 5Heavy Duty Waste Paper Rehandling Bucket With Claw 5

Toe Tip Buckets For Materials Handlers 6Replacement Cutting Edges Materials Handlers 6

Manure Forks C/w Kverneland Tines & Bolt On Grapple For Materials Handlers 7Manure Forks C/w Kaverneland Tines for Materials Handlers 7

Power Manure Fork C/w Kverneland Base & Grab Tines 8Power Silage/Manure Fork C/w Kverneland Base & Gab Tines 8

Heavy DutyManure Forks C/w High Tensile Steel Tines 9Heavy Duty Forks C/w High Tensile Steel Tines For Handlers and Loaders With Bolt On Grab 9

Short Tine Heavy Duty Manure Forks C/w High Tensile Tines & Bolt On Grapple 10Short Tine Heavy Duty Manure Forks C/w High Tensile Steel Tines & Bolt On Grapple 10

High Capacity Grass Forks C/w Kverneland Tines 11High Capacity Grass Forks Fitted with Parallel Push Off C/w Kverneland Tines 11

Manure Forks For the Smaller Handlers C/w Kverneland Tines 12Extended Robust Stockmans Grab C/w Kverneland Tines 12

Heavy Duty Grass Fork Fitted With Parallel Push Off C/w High Tensile Tines 13

Heavy Duty Bale Spikes 14Round Bale Handlers 14

Bolt On/Weld On Brackets for Evans & Reid Bale Handlers 15

Tipping Skips 16 Fly Jibs 16

Man Platform 17

Pallet Fork Carriage With Forks 17Pallet Fork Carriage Without Forks 18Heavy Duty Drive In Fork Extensions 18

Rear Mounted Bale Spikes For 1 No Round Bale 19Rear Mounted Twin Bale Spike For 2 No Round Bales or 1 No Rectangular Bales 19

Continued

Index

Index

Bale Spikes For Tractor Fore End Loaders 20

Buckets For Fore End Loaders

Buckets For David Brown L.Q.9/G.G.90

Buckets For John Deere Loaders

Buckets For Massey Ferguson 80/875/880/885/810/815/820/825/

Sugar Beet Baskets for Tractor Loaders, Materials Handler Type

Buckets & Extra Duty Digging Buckets For Tractor Fore End Loaders

Replacement Cutting Edges For Buckets

Forks For Tractor Fore End Loaders

Robust Stockmans Grabs

Round Big Bale Unwinder

Pallet Fork Carriage Forks For Tractor Loaders

Replacement Tine Rails

Shear Grab Replacement Tine Rails

Quick Hitch Frames

Quickie E Tractor Loader Mounting Brackets

Weight Box Assembly 3 Point Linkage

Skid Steer Attachments

Skid Steer Buckets

Skid Steer Industrial Grapples

Skid Steer Bale Spikes

Page Number

21

22

22

23

23

23

23

24 to 27

28 to 29

30

30

30

31

31

32

33

34to 36

37

37

37

Insert across bucket for added strength

Continuously Welded Digging strap for extra strength

Bracket straps all the way around the bucket

Evans And Reid Heavy Duty Re-Handling Buckets

Formed box section all across the top of the bucket for added strength

Added Corner gussets for extra strength

11

All buckets have 2 side wear straps and a centre wear strap when required

Heat treated Boron steel cutting edge 500 Brinell hardness

Level top section

1

1

2

2

3

3

4

5

5

6

6

7

7

47

WIDTH DEPTH HEIGHT CAPACITY CAPACITY PART number LEVEL FILL HEAPED6’6” 43” 29.5” 33 CU/FT 41 CU/FT GP 016’6” 47” 33” 41 50 CU/FT GP 026’6” 51.5” 36” 49 60 CU/FT GP 037’0” 43” 29.5” 35 GP 047’0” 47” 33” 44 54 CU/FT GP 057’0” 51.5” 36” 53 65 CU/FT GP 067’6” 43” 29.5” 38 48 CU/FT GP 077’6” 47” 33” 47 58 CU/FT GP 087’6” 51.5” 36” 56 69 CU/FT GP 098’0” 43” 29.5” 40 50 CU/FT GP 108’0” 51.5” 36” 60 71 CU/FT GP 117’6” 57.5” 40.5” 70 CU/FT 84 CU/FT GP 12A

CU/FTCU/FTCU/FT 44 CU/FTCU/FTCU/FTCU/FTCU/FTCU/FTCU/FTCU/FT

Heavy Duty Re Handling Buckets

Depth

Height

WIDTH DEPTH HEIGHT CAPACITY CAPACITY PART number LEVEL FILL HEAPED6’6” 47” 33” 41 CU/FT 50 CU/FT G 017’0” 47” 33” 44 54 CU/FT G 027’6” 47” 33” 47 58 CU/FT G 037’6” 51.5” 36” 56 69 CU/FT G 047’6” 57.5” 40.5” 70 84 CU/FT G 058’0” 51.5” 36” 60 71 CU/FT G 068’0” 57.5” 40.5” 75 91 CU/FT G 078’0” 59.5” 41.5” 80 96 CU/FT G 088’0” 63” 44” 90 108 CU/FT G 098’0” 66.5” 46.5” 100 121 CU/FT G 10

* Round bars for potatoes can be fitted P.O.A

CU/FTCU/FTCU/FTCU/FTCU/FTCU/FTCU/FTCU/FTCU/FT

Grain Buckets

2

WIDTH DEPTH HEIGHT CAPACITY CAPACITY PART number LEVEL FILL HEAPED 6’6” 39.5” 26.5” 25 CU/FT 32 CU/FT C 017’0” 39.5” 26.5” 27 35 CU/FT C 027’6” 39.5” 26.5” 29 C 37 CU/FT C 038’0” 39.5” 26.5” 31 40 CU/FT C 04

CU/FTU/FT

CU/FT

Construction Re Handling Buckets

WIDTH DEPTH HEIGHT CAPACITY CAPACITY PART number LEVEL FILL HEAPED6’6” 43” 29.5” 33 CU/FT 41 CU/FT GP 127’0” 47” 33” 44 54 CU/FT GP 137’6” 43” 29.5” 38 C 48 CU/FT GP 147’6” 47” 33” 47 58 CU/FT GP 157’6” 51.5” 36” 56 69 CU/FT GP 168’0” 43” 29.5” 40 50 CU/FT GP 178’0” 47” 33” 50 60 CU/FT GP 188’0” 51.5” 36” 60 71 CU/FT GP 19

CU/FTU/FT

CU/FTCU/FTCU/FTCU/FTCU/FT

General Purpose Handling Buckets

WIDTH DEPTH HEIGHT CAPACITY CAPACITY PART number LEVEL FILL HEAPED6’6” 39.5” 26.5” 25 CU/FT 32 CU/FT HD 01

43” 29.5” 33 40 CU/FT HD 027’0” 39.5” 26.5” 27 35 CU/FT HD 037’0” 43” 29.5” 35 44 CU/FT HD 047’0” 47” 33” 44 54 CU/FT HD 05

39.5” 26.5” 29 37 CU/FT HD 0643” 29.5” 38 48 CU/FT HD 0747” 33” 47 58 CU/FT HD 08

51.5” 36” 56 69 CU/FT HD 0951.5” 40.5” 70 84 CU/FT HD 10

6’6” CU/FTCU/FTCU/FTCU/FT

7’6” CU/FT7’6” CU/FT7’6” CU/FT7’6” CU/FT7’6” CU/FT

Extra Heavy Duty Digging Buckets

BOLT ON REVERSIBLE HEAT TREATED BLADES PART number A 0001BOLT ON DIGGING TEETH Each fitted PART number A 0002

Depth

Height

3

Polypropylene, Bristles.

These can be added to the buckets manufactured by EVANS & REID Ltd.

Manufactured to suit buckets from 6’0” to 8’0” wide

Bucket Sweeper Unit PART number A0003

Bucket sweepers (fully galvanized, easy to hitch and free standing when not in use)

Sugar Beet Baskets

WIDTH DEPTH HEIGHT CAPACITY CAPACITY PART number LEVEL FILL HEAPED7’6” 51.5” 36” 56 CU/FT 69 CU/FT SB 018’0” 57.5” 40.5” 75 91 CU/FT SB 02CU/FT8’0” 63” 44” 90 CU/FT 108 CU/FT SB 03

4

Re Handling Bucket With Curved Grapple

WIDTH DEPTH HEIGHT CAPACITY CAPACITY PART number LEVEL FILL HEAPED6’6” 39.5” 26.5” 25 CU/FT 32 CU/FT C01 BG6’6” 43” 29.5” 33 41 CU/FT GP01 BG7’0” 35 CU/FT C02 BG7’0” 43” 29.5” 35 44 CU/FT GP04 BG7’0”H.D. 51.5” 36” 53 65 CU/FT HD11 BG7’6” 39.5” 26.5” 29 37 CU/FT C03 BG7’6” 43” 29.5” 38 48 CU/FT GP07 BG7’6” 51.5” 36” 56 69 CU/FT HD09 BG

CU/FT39.5” 26.5” 27 CU/FT

CU/FTCU/FTCU/FTCU/FT

H.D. CU/FT * BOLT ON REVERSIBLE HEAT TREATED BLADES PART number A0001

WIDTH DEPTH HEIGHT CAPACITY CAPACITY PART number LEVEL FILL HEAPED7’6” 51.5” 36” 56 CU/FT 69 CU/FT HD09 WC7’6” 57.5” 40.5” 70 84 CU/FT HD10 WCCU/FT

Heavy Duty Paper Waste Re-Handling Bucket With Claw

* BOLT ON REVERSIBLE HEAT TREATED BLADES PART number A0001

Height

Depth

* OPEN GRAB MEASUREMENT: 2311.1MM

HD 10 WC

Height

Depth

5

WIDTH DEPTH HEIGHT CAPACITY PART number LEVEL FILL6’0” 29” 31” 23 CU/FT TT 16’6” 29” 31” 25 TT 27’0” 29” 31” 27 CU/FT TT 37’6” 29” 31” 29 TT 46’6” 37” 34” 35 TT 57’0” 37” 34” 38 TT 67’6” 37” 34” 40 TT 7

CU/FT

CU/FTCU/FTCU/FTCU/FT

Replacement Cutting Edges For Telescopic Handler Buckets

Boron Steel Heat TreatedBoron Steel

2.44M x 150mm x20mm Part no A000 A00052.44M x 200mm x20mm Part no A0006 A0007

Toe Tip Buckets

6

MANURE FORKS C/W KVERNELAND TINES & BOLT ON GRAPPLE

WIDTH No OF TINES PART No

7’6” 10 F 006 7’0” 10 F 007 7’0” 9 F 008 6’6” 9 F 009

* OPEN GRAB MEASUREMENT: 1850mm * BOLT ON KVERNELAND PART number A0008

MANURE FORKS C/W KVERNELAND TINES

WIDTH No OF TINES PART No 7’6” 10 F 002 7’0” 9 F 003 6’6” 9 F 004 9” Side Extensions For Forks F 005

* Bolt on Kverneland side tines PART number A0008

7

POWER FORK C/W KVERNELAND BASE AND GRAB TINES

SILAGE/MANURE

WIDTH BASE TINE GRAB TINES PART No

7’6” 10 8 F 005B7’0” 10 8 F 006B6’6” 9 7 F 007B6’0” 9 7 F 008B* Bolt On Kverneland Side Tines PART number A0008* OPEN GRAB MEASUREMENT: 1200mm* Also available with High Tensile Steel Tines,Bottom Tines and or curved

POWER FORK C/W KVERNELAND BASE AND GRAB TINES

MANURE

WIDTH No OF TINES GRAB TINES PART No

7’6” 10 5 F 005A 7’0” 10 5 F 006A 6’6” 9 5 F 008A* Bolt on Kverneland side tines PART number A0008* OPEN GRAB MEASUREMENT: 1354mm* Also available with High Tensile Steel Tines, Bottom Tines and or curved

980mm

980mm

1000mm

854mm

8

HEAVY DUTY MANURE FORKS C/W HIGH TENSILE STEEL TINES


6’6” 8 F 020 7’0” 8 F 019 7’6” 9 F 018 8’0” 10 F 017 9’0” 11 F 016


6’6” 8 F 025 7’0” 8 F 024 7’6” 9 F 023 8’0” 10 F 022 9’0” 11 F 021

HEAVY DUTY FORKS C/W HIGH TENSILE STEEL TINES FOR HANDLERS & WHEELED LOADERS WITH BOLT ON

GRAB

1087mm

1240mm

1240mm

1087mm

9

SHORT TINE HEAVY DUTY MANURE FORKS C/W HIGH TENSILE STEEL TINES


7’6” 9 F 0107’0” 8 F 0116’6” 8 F 012

SHORT TINE HEAVY DUTY MANURE FORKS C/W HIGH TENSILE STEEL TINES & BOLT ON GRAPPLE


7’6” 9 F 0137’0” 8 F 0146’6” 8 F 015

1087mm(39”)

980mm

980mm

1087mm(39”)

* OPEN GRAB MEASUREMENT: 1850MM

10

HIGH CAPACITY GRASS FORKS C/W KVERNELAND TINES


7’6” 14 F 026 8’0” 15 F 027 9’0” 16 F 028Bolt on 12” high spill guard F 029* Bolt on Kverneland side tines PART number A0008


7’6” 14 F 030 8’0” 15 F 031 9’0” 16 F 032* Can be fitted with a three point linkage

HIGH CAPACITY GRASS FORKS FITTED WITH PARALLEL PUSH OFF C/W KVERNELAND TINES

1372mm

1372mm

1087mm

11

MANURE FORKS FOR THE SMALLER HANDLERS C/W KVERNELAND TINES


6’6” 9 F 035 7’0” 9 F 034 7’6” 10 F 033

* Bolt on Kverneland side tines PART number A0008

EXTENDED ROBUST STOCKMANS GRAB C/W KVERNELAND TINES

WIDTH BASE GRAB CAPACITY PARTTINES TINES No

6’0” 9 7 31 CU/FT F 0366’6” 9 7 33 F 0377’0” 10 8 36 F 0387’6” 10 8 39 F 039*

CU/FTCU/FTCU/FT

OPEN GRAB MEASUREMENT: 1118mm * ALL MODELS FITTED WITH 1 PAIR OF SIDE TINES

813mm

980mm

980mm

630mm

12

WIDTH No TINE PART No7’6” 9 F 0408’0” 10 F 0419’0” 11 F 042

10’0” 12 F 043

Can be fitted with THREE POINT LINKAGE

1240m

1372mm

HEAVY DUTY GRASS FORK FITTED WITH PARALLELPUSH OFF C/W HIGH TENSILE STEEL TINES

13

HEAVY DUTY BALE SPIKES FOR MATERIALS HANDLERS

PART No

Single Bale Spike Twin Tine M 1010Double Bale Spike 4 Tines M 1011

INCLUDES WELD ON BRACKETS

PLEASE NOTE:- REF. MERLO & CAT MATERIAL HANDLERS

The prices do not include for the installation and complete hosing up of a double pilot operated check valve for the above handlers.

This can be carried out at an additional price of P.O.A

Double pilot operated check valves can be supplied at P.O.A

ROUND BALE HANDLERS

* Simple and strong

* Rollers can be removed to give a twin tine bale carrier

* Lift capacity 1100kg

* Available with WELD-ON or BOLT-ON brackets

* Available from stock

PART number 00011 (Brackets extra, see over for prices)

14

Tractor Loaders Telescopic Handlers

Bomford BobcatChillton CatDavid Brown F.D.I.1 Ram JCB 3C/3CXDavid Brown JCB 406/407/408/409/520-502 Ram JCB 520-4/525/527/530/David Brown 535/412Q.A. JCB 520-55/526-55Farmhand JCB Volvo TypeFaucheux John DeereGrays KramerHorndraulic ManitouJohn Deere M/F 50/B/D/EX175 Massey FergusonJohn Deere 8937/8926/8925245/265 MatbroJohn Deere Marbro TeleshiftEuro Merlo P26/P27/P28/P30M/F 80 MFTMIL Power New HollandQuickie No.3 SambronQuickie Euro SandersonRikoStollSuireTancoTanco Pin TypeTrimaZetor

Bolt-On/Weld-On Brackets for the EVANS & REID Bale Handler

15

Tipping Skip

HIGH QUALITY PALLET FORK MOUNTED SKIP WITH FULL FOUR WAY FORK ENTRY.

Overall Length 1.76 m

Overall Width 1.27 m

Overall Height 1.22 m

CAPACITY WEIGHT PART No

1.1 Cu M 280kg T001

Fly Jibs

C / W SWIVEL HOOK AND SHACKLE

C / W TEST CERTIFICATE

EXTENSION LIFT CAPACITY PART No

3M 375Kg J 001

4M 275Kg J 002

16

Man Platforms

Pallet Fork Carriage With Forks

LIFT CAPACITY CLASS ITA PART No

2.0 Tonne 2 P 0043.0 Tonne 2 P 0053.0 Tonne 3 P 006

A FULL RANGE OF REPLACEMENT PALLET FORKS AT COMPETITIVE PRICES

PART No

Double Man [2x1x1.1] Gated Direct Mounted M 001Double Man [2x1x1.1] Not Gated Direct Mounted M 002

Single Man [1.2x1x1.1] Gated Fork Mounted M 003Single Man [1.2x1x1.1] Not Gated Fork Mounted M 004

17

Pallet Fork Carriage Without Forks

LIFT CAPACITY CLASS ITA PART No

2.0 Tonne 2 P 0013.0 Tonne 2 P 0023.0 Tonne 3 P 003

* WE CAN SUPPLY PALLET FORKS FOR MOST TELEHANDLERS*WE ALSO STRAIGHTEN BENT PALLET FORKS AND RETEST THEM

Heavy Duty Drive In Fork Extensions To Suit Fork Width

LENGTH 100mm WIDE FORK WIDE FORK WIDE FORK

1524 A0011 A0012 A00131829 A0014 A0015 A00162000 A0017 A0018 A0019

125mm 150mm

IMPORTANT SAFETY NOTICE:Fork extension sleeves should never be more than 1.5x fork blade length

18

Rear Mounted Bale Spikes For 1 No Round Bale

Rear Mounted Twin Bale Spike For 2No Round Bales or 1 No Rectangular Bales

Part

2 No x 610mm Conus II Tines CAT II 10042 x 980mm Conus II Tines

Inverted “T”

Triangular Bale Spike

Rectangular Frame

19

With Conus II 980mm Tine Only

With Conus II -9800mm Tine& Conus 1-600mmAnti Rotation Tine

Inverted “T” Cat1 or CatII

Part No 1001 Part No 1001A

Triangular Big Bale Spike

Cat 1 or II


Rectagular FrameCat 1 or CatII


1No Round Bale 1No Round Bale D 1000/1010 For 2No Round980mm Tine 980mm Tine ConusII 2 x 1000mm Bales and Large

Only ConusII and 1 x 600mm Tine Tines ConusI RectangularConus I Bales 2 x 980

and 2 x 600Part Part Part PartNo No No No

No BracketsFitted, Bale 1005 1012 1019 1026Spike OnlyWith Quicke 1006 1013 1020 1027No3 BracketsWith Trima, 1007 1014 1021 1028Grays,Tanco QAWith Zetor,EuroFeaucheux, RikoStoll, J.Deere 1008 1015 1022 1029Euro, Bomford,QuickePin FittingWith Suire, Milpower, Horndraulic, 1009 1016 1023 1030Chilton,M/F 80, etcWith Tanco Pin Type, J.D. 245,J.D. 175, David 1010 1017 1024 1031Brown 1 Ram,David Brown 2 RamFarmhandDavid BrownQ.A 1011 1018 1025 1032

Bale Spikes For Tractor Fore End Loaders

20

Buckets For Tractor Fore-end Loaders

* General purpose buckets for grain and general farm duties made from 4mm plate.* Heavy duty buckets for slurry and dirt made from 5mm plate. All fitted with digging straps.* Digging buckets made from 6mm plate* Prices are inclusive of brackets.

WIDTH VOLUME 4mm 5mm 6mm(feet) (Cubic ft.) Part Number

4’ Standard 12 2001 2011 2027Intermediate 18.5 2002 2012 2028

5’ Standard 15 2003 2013 2029Intermediate 23 2004 2014 2030

Part Number Part Number


Large 38 N/A 2017 2033 6’6” Standard 19.5 2007 2018 2034

Intermediate 30.5 2008 2019 2035Large 41 N/A 2020 2036

7’ Standard 21 2009 2021 2037Intermediate 32.5 2010 2022 2038

Large 44 N/A 2023 2039 7’6” Standard 22.5 N/A 2024 2040

Intermediate 35 N/A 2025 2041Large 47 N/A 2026 2042

Buckets For Quicke/Trima/Tanco/Grays/Bomford/ Farmhand/Chillton*For Chilton and Farmhand buckets add surcharge

*For Tanco pin loaders/quickie no.2 system add surcharge

Small Large

700mm

6 8 0 mm

885mm

865mm

Intermediate

1029mm

1016mm

21

Buckets For David Brown L.Q.9/G.D.90

WIDTH VOLUME 4mm 5mm 6mm(feet) (Cubic ft.) Part Number Part Number Part Number



7’ Standard 21 2047 2052 2058Intermediate 32.5 N/A 2053 2059

* For buckets for David Brown quick release loaders add surcharge* For buckets for David Brown G.D 90 loaders add surcharge

Buckets For John Deere Loaders

WIDTH VOLUME John Deere(Cubic ft.) 245/265

Part Number 5’ Standard 18 2060

Large 31 2061 6’ Standard 21 2062

Large 38 2063 7’ Standard 25 2064

Large 44 2065 8’ Standard 29 2066

Large 50 2067

Loader

22

Replacement Cutting Edges For Buckets

Cut to customers requirements. Available at very competitive prices. Sample sizes:

Buckets For Massey Ferguson 80/875/880/885/810/815/820/825/905/910/915

WIDTH VOLUME 4mm 5mm 6mm(Cubic ft.) Part Number Part Number Part Number

4’6” Standard 19 2068 2072 2076Large 30 2069 2073 2077

6’6” Standard 28 2070 N/A N/A(with 2 runners)

Standard 28 2071 2074 2078(with 5 runners)

Large 44 N/A 2075 2079

Sugar Beet Baskets For Tractor Loaders. Materials Handler Type Buckets & Extra Heavy Duty Digging Buckets Available For Tractor

Loaders.

Other Fore-End Bucket Loaders

Standard Trip Bucket for M/F 35-7/40/80 - Part Number 2080Standard Mil Trip/Power Bucket - 20815’Wide Mil Trip/Power Bucket - 20826’Wide Mil Trip/Power Bucket - 2083Standard Horn Drolic Trip/Power Bucket - 2084

Any other tractor loader bucket can be manufactured. For Example:-Tanco 968 Pin Loader Buckets, Quickie 2000 Trip/Power Buckets,Parmiter Rear Loader Buckets.Potato BucketsSkid Steer Loader Buckets

SIZE Boron Steel Heat TreatedPart Number Boron Steel

2.00M x 100mm x 12mm A0020 Call for details.2.00M x 150mm x 15mm A0021 Call for details2.44M x 150mm x 20mm A0004 A0052.44M x 200mm x 20mm A0006 A007

*Bolt on cutting edges available

23

Forks For FarmhandPrices as for Quickie/Trima with added surcharge

Forks For Chilton Loaders Prices as for Quickie/Trima with added surcharge

Forks For Quickie/Trima/Tanco/Grays/Bomford/Zetor

WIDTH STANDARD Part No HEAVY DUTY Part No 6 Tine Fork 43” 3001 3005

(Ins.)

7 Tine Fork 54” 3002 3006 8 Tine Fork 60” 3003 3007 9 Tine Fork 70” 3004 3008 10 Tine Fork 78” N/A 3009

Forks For David Brown L.Q.9/G.D.90 with Limit Blocks

WIDTH (Ins.) STANDARD Part No HEAVY DUTY Part No 6 Tine Fork 43” 3010 3013 7 Tine Fork 54” 3011 3014 8 Tine Fork 60” 3012 3015

All David Brown Trip Forks, QD90, QR .

Forks For Tractor Fore-End Loaders

24

Forks For Horndraulic

Standard 6 Tine Trip or Power Part Number 3021(between the jaws) Dual Type Part Number 30237 Tine Power Part Number 3024

Mil Forks

Standard 6 Tine Trip or Power Dual Type

Part Number 3026Part Number 3027

Massey Ferguson Forks

Standard 6 Tine 35/7 Trip48 & 80 Trip or Power

Dual Type Wider Heavy Duty Forks Call for details.

Part Number 3028Standard 6 Tine Part Number 3029

Part Number 3030

International 241 Fork Trip Part Number 3025

Parmiter Rear Loader Forks

Standard 6 Tine Trip or Power Part Number 3031

Forks For John Deere 245/265

WIDTH (Ins.) STANDARD Part No 6 Tine Fork 48” 3016 7 Tine Fork 60” 3017 8 Tine Fork 72” 3018 9 Tine Fork 72” 3019 10 Tine Fork 80” 3020

John Deere 175 P.AOJohn Deere Euro Hook as for Quicke

25

Quickie 2000 & Quickie Multi-H Forks

Standard 6 Tine Trip or A Frame 3032Dual Type 3033

Strong Short Tine Silage/Manure Forks With Grapples

Especially suitable for the smaller fore-end loaders.

WIDTH VOLUME STRAIGHT CURVED HYDRAULIC PART 3 (meters) (m ) TINES TINES RAMS No

1.09 (43”) 0.34 6 4 1 S.T.1 1.22 (48”) 0.38 7 4 1 S.T.2 1.22 (48”) 0.38 7 4 2 S.T.3 1.36 (54”) 0.42 7 4 2 S.T.4 1.36 (54”) 0.42 8 5 1 S.T.5 1.36 (54”) 0.42 8 5 2 S.T.6 1.52 (60”) 0.46 8 5 2 S.T.7 1.52 (60”) 0.46 9 5 2 S.T.8 1.68 (66”) 0.51 9 5 2 S.T.9 1.68 (66”) 0.51 10 6 2 S.T.10 1.83 (72”) 0.55 10 6 2 S.T.11


700mm

680mm

All Other Customer Specification Forks Manufactured - P.O.A.

For Example: SILAGE FORKS for FRONT-END LOADERS

26

Strong Manure Forks With Grapples


WIDTH VOLUME STRAIGHT CURVED HYDRAULIC PART3 (meters) (M ) TINES TINES RAMS No

1.09 (43”) 0.42 6 4 1 S.F.1 1.22 (48”) 0.47 7 4 1 S.F.2 1.36 (54”) 0.53 8 5 1 S.F.3 1.36 (54”) 0.53 8 5 2 S.F.4 1.52 (60”) 0.58 9 5 2 S.F.5 1.68 (66”) 0.64 10 6 2 S.F.6 1.83 (72”) 0.70 11 6 2 S.F.7

820mm

810mm

* All models use KVERNELAND tines and sleeve on top and bottom tine rails

27

* 6 Models from 1.22M - 2.13M wide* Supplied with weld-on brackets to fit all makes of Fore-End Loaders* All models use Kverneland tines and sleeves on the top and bottom tine rail.* Curved tines and 300mm Rams used for easy penetration of the silage* Prices include side tines and brackets

Bolt on brackets Call for details.


WIDTH VOLUME STRAIGHT CURVED SIDE HYDRAULIC PART3(metres) (M ) TINES TINES TINES RAMS No

1.22 (48”) 0.47 6 4 2 1 S.G.10.47 7 4 2 1

1.22 (48”) 0.47 7 4 2 2 S.G.31.22 (48”) S.G.2

630mm

810mm

1.36 (54”) 0.53 8 5 2 2 1.52 (60”) 0.58 9 5 2 2 1.68 (66”) 0.64 10 6 2 2 1.83 (72”) 0.70 11 6 2 2 1.98 (78”) 0.76 12 7 2 2 2.13 (84”) 0.82 13 8 2 2 2.28 (90”) 0.88 14 8 2 2 S.G.11

1.36 (54”) 0.53 8 5 1 1 S.G.4S.G.5S.G.6S.G.7S.G.8S.G.9

S.G.10

Robust Stockman’s Grabs For Tractor Fore-End Loaders

28

Extra Wide Throat Stockman’s Twin Ram Grabs

FOR HANDLING ROUND BALES* OPEN GRAB MEASUREMENT: 1118MM

810mm

860mm

WIDTH VOLUME STRAIGHT CURVED SIDE HYDRAULIC PART3 (meters) (M ) TINES TINES TINES RAMS No

1.09 (48”) 0.47 7 4 2 2 EW .1 1.36 (54”) 0.52 8 5 2 2 EW .2 1.52 (60”) 0.58 9 5 2 2 EW .3 1.68 (66”) 0.64 10 6 2 2 EW .4 1.83 (72”) 0.70 11 6 2 2 EW .5 1.98 (78”) 0.76 12 7 2 2 EW .6 2.13 (84”) 0.82 13 8 2 2 EW .7

29

Made to the highest standards. Featuring:-* Part Number RBB* Brackets to suit all fore-end loaders and materials handlers* Bi-directional operation* Fitted with cros over relief valve to suit all hydraulic systems up to 3500 PSI.

Pallet Fork Carriage With Forks For Tractor Loaders

Round Big Bale Unwinder

Lift Capacity Class ITA Part Number

1.5 tonnes 2 4001 2.0 tonnes 2 4002 2.5 tonnes 2 4003*Also available with 3 point Linkage Brackets

Replacement Tine Rails With Kverneland Sleeves Welded In

80mm x 80mm Box Section 6 Conus I Sleeves A0022 80mm x 80mm Box Section 7 Conus I Sleeves A0023 80mm x 80mm Box Section 8 Conus I Sleeves A0024 80mm x 80mm Box Section 9 Conus I Sleeves A0025 80mm x 80mm Box Section 10 Conus I Sleeves A0026 80mm x 80mm Box Section 9 Conus II Sleeves A0027 80mm x 80mm Box Section 10 Conus II Sleeves A0028

100mm x 50mm Tine Rails Available100mm x 60mm Tine Rails Available

3 Point Linkage Bracket

30

With Lever Locking Mechanism. Hydraulic Locking/Manual Pole

Quicke No.2 System Quicke No.3 Hooks

Manitou Quicke No.3 Hooks

Cat Telescopic Sanderson

Also, Quick Hitch Frames For M/F Diggers, JCB 3CX etc.

Parmiter SG 100 Grab Part No A 0029 SG 200 SG 250 SG 300

Parmiter Grab Part No A 0030 Parmiter Grab Part No A 0031 Parmiter Grab Part No A 0032 Parmiter SG 350 Grab Part No A 0033

Shear Grab Replacement Tine Rails With KVERNELAND Sleeves

Quick Hitch Frames For Tractor Loaders/Diggers/Material Handlers

31

Quicke E Tractor Loader Mounting Brackets

BRACKET TYPE TRACTOR Part Number

Quicke E Loader Case International 1290/1294/1390 A0034/1394 - 4.W.D

Quicke E Loader Case International 1490/1494 - 4.W.D. A0035Kit Form Only

Quicke E Loader Fiat L65, L75, L85, L95 - 4.W.D. A0036

Quicke E Loader Ford 4835, 5635, 6635, 7635, - 4.W.D. A0037TL80, Tl90, Tl100 - 4WD

Quickie E Loader Ford 5600, 5610, 6600, 6610, 7600, 7610, 6410, A00386810 - 4W.D

Quicke E Loader Ford 5030 - 4.W.D. A0039

Quicke E Loader Ford 4630 - 4.W.D. A0040

Quicke E Loader Ford 5640, 6640, 7740 - 4.W.D. A0041Ts90, Ts100, TS110

Quicke E Loader * International 585/685/785/885/985/595/695/ A0042795/895/995 - LP/XL 4.W.D.

Quicke E Loader * International 3200/3220/4210/4220/4230/ A00434240 - LP/XL 4.W.D.

Rear Axle Extensions to fit International 85/95 LXL Series - 4.W.D. A0044and International 3220, 3200, 4210, 4230, 4240 - 4.W.D.

Quicke E Loader M/F 375, 398, 390, 390T - 4.W.D. A0045

Quicke E Loader Zetor 5945, 6045, 6945, 7045 - 4.W.D. A0046

**Continued over the page**

32

WEIGHT BOX ASSEMBLY WITH 3 POINT LINKAGE AND ADJUSTABLE PARKING LEGS A0051

Quicke E Loader Zetor 4320, 4340, 5320, 5340, 6320, 6340, A00487320, 7340 - 4.W.D.

Quicke E Loader Zetor 3 Cyl Models A00494.W.D. / 2.W.D. (Kit Form Only)

Rear Axle Extensions to fit 4 Cyl Zetor Models A0050

* Please note that spacers can be supplied for fitting Tractor Loader Mounting Brackets to International Tractors

33

Skid Steer Attachment

Skid Steer Industrial Pallet Fork Carriages Fitted With I.T.A Forks

Lift Capacity - 1.9 tonnes I.T.A. Class 2A Part Number SBPF

Skid Steer Muck Forks (Fitted With KVERNELAND (KV) Tines)

TYPE WIDTH TINE No PART No

Small Forks 36” 6 SSSF/3640” 6 SSSF/4042” 6 SSSF/4244” 6 SSSF/44

Medium Forks 48” 7 SSMF/4854” 7 SSMF/5460” 8 SSMF/6066” 9 SSMF/66

Large Forks 60” 8 SSLF/6066” 9 SSLF/6673” 10 SSLF/73

34

Strong Short Tine Silage/Manure Forks With Grapples

All models use Kverneland tines and sleeves on top and bottom tine rails.

Skid Steer Attachment

Width

1.09m/43

Volume(Cubic Metre)

0.34

Number ofStraight Tines

Number of Curved Tines

Number of Hydraulic

Rams

Part Number

6 4 1

1.22m/48 0.38 7 4 11.22m/48 0.38 7 4 21.36m/54 0.42 7 4 21.36m/54 0.42 8 5 21.52m/60 0.46 8 5 21.52m/60 0.46 9 5 2

1.68m/66 0.51 9 5 21.68m/66 0.51 10 6 21083m/72 0.55 10 6 2

SSMFG01

SSMFG02

SSMFG03

SSMFG04

SSMFG05

SSMFG06

SSMFG07

SSMFG08

SSMFG09

SSMFG10

35

TYPE WIDTH TINE No PART No

Small Forks 36” 6 SSSFG/36(single ram) 40” 6 SSSFG/40

42” 7 SSSFG/4244” 7 SSSFG/44

Medium Forks 48” 7 SSMFG/48(single ram) 54” 7 SSMFG/54

60” 8 SSMFG/6066” 9 SSMFG/66

Large Forks 60” 8 SSLFG/60(twin ram) 66” 9 SSLFG/66

73” 10 SSLFG/73

Skid Steer Loader Forks C/W Grapples (Fitted With KV BASE Tines)

610mm

680mm 775mm

810mm

LargeSmall Intermediate

36

WIDTH CAPACITY TEETH PART No(CU/FT)

36” 5 0 SSDB/3642” 5.8 0 SSDB/4248” 6.6 0 SSDB/4854” 8.8 0 SSDB/5460” 10.6 0 SSDB/6066” 14.4 0 SSDB/6673” 19.7 0 SSDB/7336” 5 4 SSDBT/3642” 5.8 4 SSDBT/4248” 6.6 5 SSDBT/4854” 8.8 6 SSDBT/5460” 10.6 7 SSDBT/6066” 14.4 8 SSDBT/6673” 19.7 9 SSDBT/73

Skid Steer Dirt Buckets

Skid Steer Utility Buckets

WIDTH CAPACITY TEETH PART No(CU/FT)

36” 6.5 0 SSUB/3642” 7.6 0 SSUB/4248” 9.2 0 SSUB/4854” 13.0 0 SSUB/5460” 14.8 0 SSUB/6066” 16.5 0 SSUB/6673” 27.5 0 SSUB/73

Skid Steer Industrial Grapples

WIDTH TEETH PART No

Single Ram 48” 0 SSIG/4854” 0

Twin Ram 60” 066” 0

SSIG/54SSIG/60SSIG/66

Skid Steer Bale Spikes

Bale spike complete with one 38” Kv TineBale spike complete with one 38” Kv Tineand one 24” Kv anti rotation tine

PART No

SSBS/1

SSBS/2

37

Documents

Agricultural Catalogue 2013 - Telehandler Centre · Agricultural Catalogue 2013 . Materials Handling Attachments ... Bucket Sweeper Unit PART number A0003 Bucket sweepers (fully galvanized,