AHS +Associates

AHS+Associates

The New Atascocita High School Basketball Arena

Atascocita Basketball Arena

AHS+Associates Atascocita Basketball Arena

New England Colonial

Site Photo

Site: the piece of land on which something is located (or to be located)

AHS+Associates


Sample Site Plan

Site Plan: a view looking down at buildings from above, illustrates location, orientation, topography, landscape, etc.


AHS+Associates

New England Colonial1. Create site plan from site photo


AHS+Associates


2. Send your finished file “Your Name Site Plan.dwg” to your period #

[email protected]@[email protected]

[email protected] Atascocita Basketball Arena

AHS+Associates


Traffic Flow: Pedestrian & Vehicles



3. Copy your AutoCAD file “Your Name Site Plan.dwg” & rename it “Your Name Traffic Flow.dwg”

AHS+Associates

4. Add 400 Foot Diameter Basketball Arena Circle5. Add 160,000 sq. ft of new parking space (600 cars)6. Draw arrows indicating traffic flow to Arena



Sketching Ideas


Sketching Ideas


Sketching Ideas


Sketching Ideas

AHS+Associates

7. Sketch the above drawing (download photo from website) with pencil on a blank sheet of paper


AHS+Associates

8. Sketch the above drawing (download photo from website) with pencil on a blank sheet of paper


AHS+Associates

9. Make an AutoCAD drawing of a standard basketball court. Do not draw the dimensions, just the lines. - Call the file "Your Name Basketball Court.dwg"







10. Make Basketball Arena Floor Plan Open your file "Your Name Basketball Court.dwg" and add walls (thick lines) and labels for:

a. Seat Outline walls b. Four sets of External Doorsc. Ticket Booth Room d. Locker Roomse. Rest Rooms f. Concession Standsg. Office Room h. Maintenance Room (Note: make the rooms different colors)










11. Make Basketball Arena Section View - Save your file as: "Your Name Basketball Section.dwg"


12. Make Basketball Arena Elevation View - Add a gradient hatch over your section view. - Add doors. - Save your file as: "Your Name Basketball Elevation.dwg"


13. Make a ground sheet for the model. - Copy “Your Name ground sheet.dwg” from the Student Common >STILLEY folder to your student ID folder. - INSERT your files to the model tab. - Save your file as: " Your Name ground sheet.dwg"

Your Name Traffic Flow.dwg

Your Name Basketball Section .dwg

Your Name Basketball Floor Plan.dwg


14. Adjust the size of each drawing in the Viewports.

Your Name Traffic Flow.dwg

Your Name Basketball Section .dwg

Your Name Basketball Floor Plan.dwg


15. Make a folder to hold your model pieces during construction.


16. Trim the corners of your “Your Name ground sheet” printout & tape to the foam core board.


17. Choose 1 of 6 color schemes for your Geodesic Dome.

“A” – 30 Red Straws, 35 Blue Straws“B” – 30 Blue Straws, 35 Red Straws“C” – 30 Yellow Straws, 35 Orange Straws“D” – 30 Orange Straws, 35 Yellow Straws“E” – 30 Purple Straws, 35 Green Straws“F” – 30 Green Straws, 35 Purple Straws

Use Sharpie to put the Letter you choose on your clear bag.


18. Cut the lengths of:

26 Pieces of Red Wire

30 ShortStraws

35 LongStraws


19. Punch holes in both ends of all straws:

Make sure the holes are lined up together

Stop


20. Connect the straws together with the pieces of wire

a. Wrap the wire around a pencil



b. Start with connection #1 & count the number of colored straws that connect at point #1

c. Slide the straws over the wire ends



d. Bend the wires down

e. Slide the pencil out


21. IMPORTANT ! Assemble the dome by going in order from point 1, 2, 3, 4 … 26

Between point 1 & point 2 put a piece of tape on the straw. Write YOUR NAME& PERIOD # on it.


22. Cut out the SEAT shapes from the poster board

Only cut the solid lines.

DON’T cut the dashed lines!


23. Tape the edges of the seat pattern together

Fold on dashed lines


23. Tape the edges of the seat pattern together

Match up A to A

&B to B


24. Insert the seat tabs through the slots and tape on the backside. (Mr. Stilley will cut the slots)

(Back side)


25. Mount Geodesic dome to foam core board with tape

Tape at least 3 places


Finished Model

Documents

AHS +Associates