20
Models: FCA 201/301 EC/CH FCA 201/301 NC/NH FCA 201 ECA / FH Models: l M M M 301 EC/CH CH CH EC 201/30 30 FCA 2 A 201/30 FCA 2 F 01 NC/NH H H C 201/30 0 FCA 20 20 0 C 20 C FCA 201 EC 0 C 0 C Mo M M 1 NC/NH / 1 A / FH H 01 ECA CA FCA 20 01 ECA CA 20 C A 2 2 2 A 01 AIR COOLED MODULAR CHILLER Chiller Products FCH01-2009

AIR COOLED MODULAR CHILLER - Contekthe refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this,

  • Upload
    others

  • View
    6

  • Download
    0

Embed Size (px)

Citation preview

Page 1: AIR COOLED MODULAR CHILLER - Contekthe refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this,

Models: FCA 201/301 EC/CH FCA 201/301 NC/NH FCA 201 ECA / FH

Models: lMMM 301 EC/CHCHC/CHEC201/3030FCA 2A 201/30FCA 2F01 NC/NHHC/NHC/201/300FCA 2020 0C 20C

FCA 201 EC0C 0C

MoMM1 NC/NH//1A / FH H H 01 ECACAFCA 2001 ECACA 20C

A 222A

01

AIR COOLED MODULAR CHILLER

Chiller ProductsFCH01-2009

Page 2: AIR COOLED MODULAR CHILLER - Contekthe refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this,

Page 1

Product Nomenclature .............................................................................2

Features ................................................................................................3

Engineering Specifications .......................................................................4

General Data .................................................................................4

Operating Range .......................................................................... 20

System Schematic Diagram ........................................................... 21

Controller Features and Algorithm .................................................. 24

Sound Data .........................................................................................29

Sound Pressure Level ................................................................... 29

Equipment Selection ............................................................................ 30

Dimensions ..........................................................................................38

Wiring Diagrams ...................................................................................40

Installation ..........................................................................................49

Servicing and Maintenance .................................................................... 55

Troubleshooting ....................................................................................57

Exploded View and Parts List .................................................................. 58

Contents

© 2009 FRIMEC-INTERNATIONAL. All rights reserved.

Page 3: AIR COOLED MODULAR CHILLER - Contekthe refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this,

Page 2

Product Nomenclature

Air-Cooled Modular Chiller

FCA 2 01 E

C Cooling OnlyH Heat Pump

E R22N R410AF R22, Low Ambient Heating

2 Unit Size.

FCA Air-Cooled Modular Chiller

C

A Product Specification Variation

(ECA - R22, Low Ambient Cooling)

01 Quantity of module

A

Page 4: AIR COOLED MODULAR CHILLER - Contekthe refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this,

Page 3

Simple and easy installation method reduces the manpower and cost during installation and commissioning.

The largest combination up to 12 modules in modular chillers provides wide range of cooling capacity, from 66kW up to 1100kW. Multiple steps of capacity control deliver precise cooling or heating capacity based on user needs.

The low ambient package available in FCA system can serves various type of operating conditions. The economiser which reduce the refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this, the FCA-ECA series with build in fan speed controller optimize the heat transfer efficiency and leading the chiller operates cooling mode at low ambient temperature.

The seamless inner groove copper tube which provides large inner tube surface enhances the heat transfer rate. This will greatly improve chiller efficiency. By unrestricting the flow of condensate over the outdoor coils, the hydrophilic fins significantly improve the chiller performances especially operates heating mode at low ambient temperature. All aluminium microchannel condenser coils in FCA-NC series come with many small flow channels providing more heat transfer than traditional coils. This will greatly reduce the unit weight and dimension.

High discharge temperature protection, compressor overload protection, high/low pressure switch, filter drier, anti freeze protection and automatic/manual defrost functions distinguish chillers with its outstanding features.

Wired LCD controller equipped with various operating mode, timer setting, self diagnosis in error code and leaving and entering temperature display. This will greatly reduce the commissioning and troubleshooting time.

Simple Installation

Wide Capacity Ranges

Low Ambient Operation

High Performance Condenser

Safety Protection

Features

Easy Maintenance

Page 5: AIR COOLED MODULAR CHILLER - Contekthe refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this,

Page 4

Engineering SpecificationsGeneral Data - FCA - E Series (R22)

Note:1. Product are tested in accordance to GB/T18430.1-20012. Cooling capacity is based on 12°C entering and 7°C leaving water temperature, 35°C ambient temperature.3. Heating capacity is based on 40°C entering and 45°C leaving water temperature, 7°C ambient temperature. 4. The manufacturer reserves the rights to make changes to the above specifications without prior notice.

FCA 201EC/EH 301EC/EH 202EC/EH 201+301 EC/EH 203EC/EH

kW 60.8 94.6 121.6 155.4 182.4

kW 62.3 100.5 124.6 162.8 187.0

Cooling kW 21.2 35.6 42.4 56.8 63.6

Heating kW 21.2 35.1 42.4 56.3 63.6

V/Ph/Hz

2 4 4 6 6

Oil Amount L 6.5 13.0 13.0 19.5 19.5

2 2 4 4 6

2 2 4 4 6

Charging Mass kg 18 26 36 44 54

2 2 4 4 6

Input Power kW 1.5 2.2 3.0 3.7 4.5

Rotational Speed RPM 715 715 715 715 715

Diameter mm 710 800 710 710/800 710

1 1 2 2 3

Water Flow Rate m3/h 10.5 16.3 21.0 26.8 31.4

Water Pressure Drop kPa 96.0 96.0 103.0 103.0 109.0

Water Pipe DN

Length mm

Width mm 1030 1073 2060 2103 3090

Height mm

kg 740 1000 1480 1740 2220

kg 799 1080 1598 1879 2397Operation Weight

Evaporator

Type

Model

Condenser

Unit Weight

Refrigerant

Type

Dimension

Quantity

Seamless Inner Groove Copper and Hydrophilic Fin

Hermetic Scroll

2206

R22

2063

Propeller Fan

Shell and Tube Heat Exchanger

DN40, Male Union

Nominal Cooling Capacity

Nominal Heating Capacity

Quantity

Compressor

Type

CondenserFan

Type

Number of Refrigerant Circuit

Operation Control

380 / 3 / 50

LCD Wired Micro-Computer or Manual Control

Stage of Capacity Control

Nominal Input Power

Power Source

Quantity

Page 6: AIR COOLED MODULAR CHILLER - Contekthe refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this,

Page 5

Note: 1. Product are tested in accordance to GB/T18430.1-2001 2. Cooling capacity is based on 12°C entering and 7°C leaving water temperature, 35°C ambient temperature. 3. Heating capacity is based on 40°C entering and 45°C leaving water temperature, 7°C ambient temperature. 4. The manufacturer reserves the rights to make changes to the above specifications without prior notice.

FCA 202+301EC/EH 204EC/EH 203+301EC/EH 205EC/EH 206EC/EHkW 216.2 243.2 277.0 304.0 364.8kW 225.2 249.3 287.5 311.6 373.9

Cooling kW 78.0 84.8 99.2 106.0 127.2Heating kW 77.5 84.8 98.7 106.0 127.2

V/Ph/Hz

8 8 10 10 12Oil Amount L 26.0 26.0 32.5 32.5 39.0

6 8 8 10 12

6 8 8 10 12Charging Mass kg 62 72 80 90 108

6 8 8 10 12Input Power kW 5.2 6.0 6.7 7.5 9.0Rotational Speed RPM 715 715 715 715 715Diameter mm 710/800 710 710/800 710 710

3 4 4 5 6Water Flow Rate 37.3 41.9 47.8 52.4 62.9Water Pressure Drop kPa 109.0 115.0 115.0 120.0 125.0Water Pipe DNLength mmWidth mm 3133 4120 4163 5150 6180Height mm

kg 2480 2960 3220 3700 4440kg 2678 3197 3477 3996 4795

DN40, Male Union2206

2063

380 / 3 / 50LCD Wired Micro-Computer or Manual Control

Seamless Inner Groove Copper and Hydrophilic Fin

Shell and Tube Heat Exchanger

Hermetic Scroll

Propeller Fan

R22

Nominal Input Power

Power Source

Quantity

ModelNominal Cooling CapacityNominal Heating Capacity

Operation Control

Quantity

Compressor

Type

CondenserFan

Type

Number of Refrigerant Circuit

Stage of Capacity Control

Condenser

RefrigerantType

Operation Weight

Evaporator

TypeQuantity

Unit Weight

Dimension

m3/h

General Data - FCA - E Series (R22)

Page 7: AIR COOLED MODULAR CHILLER - Contekthe refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this,

Page 6

General Data - FCA - E Series (R22)

Note: 1. Product are tested in accordance to GB/T18430.1-2001 2. Cooling capacity is based on 12°C entering and 7°C leaving water temperature, 35°C ambient temperature. 3. Heating capacity is based on 40°C entering and 45°C leaving water temperature, 7°C ambient temperature. 4. The manufacturer reserves the rights to make changes to the above specifications without prior notice.

FCA 207EC/EH 208EC/EH 209EC/EH 210EC/EH 211EC/EH

kW 425.6 486.4 547.2 608.0 668.7

kW 436.2 498.5 560.9 623.2 685.5

Cooling kW 148.4 169.6 190.8 212.0 233.2

Heating kW 148.4 169.6 190.8 212.0 233.2

V/Ph/Hz

14 16 18 20 22

Oil Amount L 45.5 52.0 58.5 65.0 71.5

14 16 18 20 22

14 16 18 20 22

Charging Mass kg 126 144 162 180 198

14 16 18 20 22

Input Power kW 10.5 12.0 13.5 15.0 16.5

Rotational Speed RPM 715 715 715 715 715

Diameter mm 710 710 710 710 710

7 8 9 10 11

Water Flow Rate m3/h 73.4 83.9 94.3 104.8 115.3

Water Pressure Drop kPa 130.0 135.0 140.0 145.0 150.0

Water Pipe DN

Length mm

Width mm 7210 8240 9270 10300 11330

Height mm

kg 5180 5920 6660 7400 8140

kg 5594 6393 7193 7992 8791Operation Weight

Evaporator

Type

Model

Condenser

Unit Weight

Refrigerant

Type

Dimension

Quantity

Nominal Cooling Capacity

Nominal Heating Capacity

Quantity

Compressor

Type

CondenserFan

Type

Number of Refrigerant Circuit

Operation Control

Stage of Capacity Control

Nominal Input Power

Power Source

Quantity

2206

2063

DN40, Male Union

380 / 3 / 50

LCD Wired Micro-Computer or Manual Control

Seamless Inner Groove Copper and Hydrophilic Fin

Shell and Tube Heat Exchanger

Propeller Fan

Hermetic Scroll

R22

Page 8: AIR COOLED MODULAR CHILLER - Contekthe refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this,

Page 7

Note: 1. Product are tested in accordance to GB/T18430.1-2001 2. Cooling capacity is based on 12°C entering and 7°C leaving water temperature, 35°C ambient temperature. 3. Heating capacity is based on 40°C entering and 45°C leaving water temperature, 7°C ambient temperature. 4. The manufacturer reserves the rights to make changes to the above specifications without prior notice.

FCA 212EC/EH 209+303EC/EH 206+306EC/EH 203+309EC/EH 312EC/EH

kW 729.5 831.1 932.7 1034.2 1135.8

kW 747.8 862.4 977.1 1091.7 1206.3

Cooling kW 254.4 297.6 340.9 384.1 427.4

Heating kW 254.4 296.2 338.0 379.8 421.6

V/Ph/Hz

24 30 36 42 48

Oil Amount L 78.0 97.5 117.0 136.5 156.0

24 24 24 24 24

24 24 24 24 24

Charging Mass kg 216 240 264 288 312

24 24 24 24 24

Input Power kW 18.0 20.1 22.2 24.3 26.4

Rotational Speed RPM 715 715 715 715 715

Diameter mm 710 710/800 710/800 710/800 800

12 12 12 12 12

Water Flow Rate 125.8 143.3 160.8 178.3 195.8

Water Pressure Drop kPa

m3/h

155.0 155.0 155.0 155.0 155.0

Water Pipe DN

Length mm

Width mm 12360 12489 12618 12747 12876

Height mm

kg 8880 9660 10440 11220 12000

kg 9590 10433 11275 12117 12960

Model

2063

2206

DN40, Male Union

380 / 3 / 50

LCD Wired Micro-Computer or Manual Control

Seamless Inner Groove Copper and Hydrophilic Fin

Shell and Tube Heat Exchanger

Propeller Fan

R22

Hermetic Scroll

Stage of Capacity Control

Nominal Input Power

Power Source

Quantity

Nominal Cooling Capacity

Nominal Heating Capacity

Quantity

Compressor

Type

CondenserFan

Type

Number of Refrigerant Circuit

Operation Control

Condenser

Refrigerant

Type

Dimension

Operation Weight

Evaporator

Type

Quantity

Unit Weight

General Data - FCA - E Series (R22)

Page 9: AIR COOLED MODULAR CHILLER - Contekthe refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this,

Page 8

General Data - FCA - NC Series (R410A)

Note: 1. Product are tested in accordance to GB/T18430.1-2001 2. Cooling capacity is based on 12°C entering and 7°C leaving water temperature, 35°C ambient temperature. 3. The manufacturer reserves the rights to make changes to the above specifications without prior notice.

FCA 201NC 301NC 202NC 201+301NC 203NC

kW 62.0 102.7 124.0 164.7 186.0

Nominal Input Power kW 21.0 35.3 42.0 56.3 63.0

2 4 4 6 6

Oil Amount L 5.6 11.2 11.2 16.8 16.8

2 2 4 4 6

2 2 4 4 6

Charging Mass

FCA201NC

FCA301NC

kg 8 14 16 22 24

2 2 4 4 6

Input Power kW 1.5 2.2 3.0 3.7 4.5

Rotational Speed RPM 715 715 715 715 715

Diameter mm 710 800 710 710/800 710

1 1 2 2 3

Water Flow Rate 10.7 17.7 21.4 28.4 32.1

Water Pressure Drop kPa

m3/h

95.0 105.0 102.0 102.0 108.0

Water Pipe DNLength mm

Width mm

Height mm

kg 430 600 860 1030 1290

kg 470 650 940 1120 1410

Hermetic Scroll

Aluminium Microchannel Heat Exchanger

Seamless Inner Groove Copper and Hydrophilic Fin

Plate Heat Exchanger

Propeller Fan

R410A

Nominal Cooling Capacity

Operation Control

Power Source 380 / 3 / 50

LCD Wired Micro-Computer or Manual Control

Type

CondenserMotor

Type

Number of Refrigerant Circuit

Stage of Capacity Control

Model

Condenser

Unit Weight

Refrigerant

Type

Dimension(Single Module)

Quantity

Quantity

Quantity

Compressor

1120

Operation Weight

Evaporator

Type

1440

1940

DN40, Female Union

V/Ph/Hz

Page 10: AIR COOLED MODULAR CHILLER - Contekthe refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this,

Page 9

General Data - FCA - NC Series (R410A)

Note: 1. Product are tested in accordance to GB/T18430.1-2001 2. Cooling capacity is based on 12°C entering and 7°C leaving water temperature, 35°C ambient temperature. 3. The manufacturer reserves the rights to make changes to the above specifications without prior notice.

FCA 202+301NC 204NC 203+301NC 205NC 206NC

kW 226.7 248.0 288.7 310.0 372.0

Nominal Input Power kW 77.3 84.0 98.3 105.0 126.0

V/Ph/Hz

8 8 10 10 12

Oil Amount L 22.4 22.4 28.0 28.0 33.6

6 8 8 10 12

6 8 8 10 12

Charging Mass kg 30 32 38 40 48

6 8 8 10 12

Input Power kW 5.2 6.0 6.7 7.5 9.0

Rotational Speed RPM 715 715 715 715 715

Diameter mm 710/800 710 710/800 710 710

3 4 4 5 6

Water Flow Rate m3/h 39.1 42.8 49.8 53.4 64.1

Water Pressure Drop kPa 108.0 114.0 114.0 119.0 124.0

Water Pipe DN

Length mm

Width mm

Height mm

kg 1460 1720 1890 2150 2580

kg 1590 1880 2060 2350 2820

1120

Refrigerant

Type

Dimension(SingleModule)

Operation Weight

Evaporator

Type

Quantity

Unit Weight

Nominal Cooling Capacity

Quantity

Compressor

Type

CondenserMotor

Type

Number of Refrigerant Circuit

Operation Control

Condenser

Hermetic Scroll

Stage of Capacity Control

Power Source

Quantity

Model

1440

1940

DN40, Female Union

380 / 3 / 50

LCD Wired Micro-Computer or Manual Control

Aluminium Microchannel Heat Exchanger

Seamless Inner Groove Copper and Hydrophilic Fin

Plate Heat Exchanger

Propeller Fan

R410A

FCA201NC

FCA301NC

Page 11: AIR COOLED MODULAR CHILLER - Contekthe refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this,

Page 10

General Data - FCA - NC Series (R410A)

Note: 1. Product are tested in accordance to GB/T18430.1-2001 2. Cooling capacity is based on 12°C entering and 7°C leaving water temperature, 35°C ambient temperature. 3. The manufacturer reserves the rights to make changes to the above specifications without prior notice.

FCA 207NC 208NC 209NC 210NC 211NC

kW 434.0 496.0 558.0 620.0 682.0

Nominal Input Power kW 147.0 168.0 189.0 210.0 231.0

V/Ph/Hz

14 16 18 20 22

Oil Amount L 39.2 44.8 50.4 56.0 61.6

14 16 18 20 22

14 16 18 20 22

Charging Mass kg 129 134 139 144 149

14 16 18 20 22

Input Power kW 10.5 12.0 13.5 15.0 16.5

Rotational Speed RPM 715 715 715 715 715

Diameter mm 710 710 710 710 710

7 8 9 10 11

Water Flow Rate m3/h 74.8 85.5 96.2 106.9 117.6

Water Pressure Drop kPa 170.0 180.0 190.0 200.0 210.0

Water Pipe DN

Length mm

Width mm

Height mm

kg 3010 3440 3870 4300 4730

kg 3290 3760 4230 4700 5170

Hermetic Scroll

1120

1440

1940

DN40, Female Union

Aluminium Microchannel Heat Exchanger

Seamless Inner Groove Copper and Hydrophilic Fin

Plate Heat Exchanger

Propeller Fan

R410A

Nominal Cooling Capacity

Operation Control

Power Source 380 / 3 / 50

LCD Wired Micro-Computer or Manual Control

Quantity

Quantity

Compressor

Type

CondenserMotor

Type

Number of Refrigerant Circuit

Stage of Capacity Control

Operation Weight

Evaporator

Type

Model

Condenser

Unit Weight

Refrigerant

Type

Dimension(Single Module)

Quantity

FCA201NC

FCA301NC

Page 12: AIR COOLED MODULAR CHILLER - Contekthe refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this,

Page 11

General Data - FCA - NC Series (R410A)

Note: 1. Product are tested in accordance to GB/T18430.1-2001 2. Cooling capacity is based on 12°C entering and 7°C leaving water temperature, 35°C ambient temperature. 3. The manufacturer reserves the rights to make changes to the above specifications without prior notice.

FCA 212NC 209+303NC 206+306NC 203+309NC 312NC

kW 744.0 866.1 988.2 1110.3 1232.4

Nominal Input Power kW 252.0 294.9 337.8 380.8 423.7

V/Ph/Hz

24 30 36 42 48

Oil Amount L 67.2 84.0 100.8 117.6 134.4

24 24 24 24 24

24 24 24 24 24

Charging Mass kg 154 154 154 154 154

24 24 24 24 24

Input Power kW 18.0 20.1 22.2 24.3 26.4

Rotational Speed RPM 715 715 715 715 715

Diameter mm 710 710/800 710/800 710/800 800

12 12 12 12 12

Water Flow Rate m3/h 128.3 149.3 170.4 191.4 212.5

Water Pressure Drop kPa 220.0 220.0 220.0 220.0 220.0

Water Pipe DN

Length mm

Width mm

Height mm

kg 5160 5670 6180 6690 7200

kg 5640 6180 6720 7260 7800

1120

Refrigerant

Type

Dimension (Single Module)

Operation Weight

Evaporator

Type

Quantity

Unit Weight

Nominal Cooling Capacity

Quantity

Compressor

Type

CondenserMotor

Type

Number of Refrigerant Circuit

Operation Control

Condenser

Hermetic Scroll

Stage of Capacity Control

Power Source

Quantity

Model

1440

1940

DN40, Female Union

380 / 3 / 50

LCD Wired Micro-Computer or Manual Control

Aluminium Microchannel Heat Exchanger

Seamless Inner Groove Copper and Hydrophilic Fin

Plate Heat Exchanger

Propeller Fan

R410A

FCA201NC

FCA301NC

Page 13: AIR COOLED MODULAR CHILLER - Contekthe refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this,

Page 12

General Data - FCA - NH Series (R410A)

Note: 1. Product are tested in accordance to GB/T18430.1-2001 2. Cooling capacity is based on 12°C entering and 7°C leaving water temperature, 35°C ambient temperature. 3. Heating capacity is based on 40°C entering and 45°C leaving water temperature, 7°C ambient temperature. 4. The manufacturer reserves the rights to make changes to the above specifications without prior notice.

FCA 201NH 301NH 202NH 201+301NH 203NH

kW 62.0 102.7 123.9 164.7 185.9

kW 64.9 113.3 129.8 178.1 194.7

Cooling kW 21.0 35.3 42.0 56.3 63.0

Heating kW 21.9 38.7 43.7 60.5 65.6

V/Ph/Hz

2 4 4 6 6

Oil Amount L 5.6 11.2 11.2 16.8 16.8

2 2 4 4 6

2 2 4 4 6

Charging Mass kg 14 20 28 34 42

2 2 4 4 6

Input Power kW 1.5 2.2 3.0 3.7 4.5

Rotational Speed RPM 715 715 715 715 715

Diameter mm 710 800 710 710/800 710

1 1 2 2 3

Water Flow Rate m3/h 10.7 17.7 21.4 28.4 32.0

Water Pressure Drop kPa 95.0 105.0 102.0 102.0 108.0

Water Pipe DN

Length mm

Width mm

Height mm

kg 500 680 1000 1180 1500

kg 540 730 1080 1270 1620

1120

Operation Weight

Evaporator

Type

1440

1940

DN40, Female Union

Model

Condenser

Unit Weight

Refrigerant

Type

Dimension(Single Module)

Quantity

Quantity

Quantity

Compressor

Type

CondenserMotor

Type

Number of Refrigerant Circuit

Stage of Capacity Control

Nominal Cooling Capacity

Nominal Heating Capacity

Operation Control

Nominal Input Power

Power Source 380 / 3 / 50

LCD Wired Micro-Computer or Manual Control

Seamless Inner Groove Copper and Hydrophilic Fin

Plate Heat Exchanger

Propeller Fan

R410A

Hermetic Scroll

Page 14: AIR COOLED MODULAR CHILLER - Contekthe refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this,

Page 13

General Data - FCA - NH Series (R410A)

Note: 1. Product are tested in accordance to GB/T18430.1-2001 2. Cooling capacity is based on 12°C entering and 7°C leaving water temperature, 35°C ambient temperature. 3. Heating capacity is based on 40°C entering and 45°C leaving water temperature, 7°C ambient temperature. 4. The manufacturer reserves the rights to make changes to the above specifications without prior notice.

FCA 202+301NH 204NH 203+301NH 205NH 206NH

kW 226.6 247.8 288.6 309.8 371.7

kW 243.1 259.6 307.9 324.5 389.3

Cooling kW 77.3 84.0 98.3 105.0 126.0

Heating kW 82.4 87.4 104.2 109.3 131.1

V/Ph/Hz

8 8 10 10 12

Oil Amount L 22.4 22.4 28.0 28.0 33.6

6 8 8 10 12

6 8 8 10 12

Charging Mass kg 48 56 62 70 84

6 8 8 10 12

Input Power kW 5.2 6.0 6.7 7.5 9.0

Rotational Speed RPM 715 715 715 715 715

Diameter mm 710/800 710 710/800 710 710

3 4 4 5 6

Water Flow Rate m3/h 39.1 42.7 49.8 53.4 64.1

Water Pressure Drop kPa 108.0 114.0 114.0 119.0 124.0

Water Pipe DN

Length mm

Width mm

Height mm

kg 1680 2000 2180 2500 3000

kg 1810 2160 2350 2700 3240

Model

1440

1940

DN40, Female Union

380 / 3 / 50

LCD Wired Micro-Computer or Manual Control

Seamless Inner Groove Copper and Hydrophilic Fin

Plate Heat Exchanger

Propeller Fan

R410A

Hermetic Scroll

Stage of Capacity Control

Nominal Input Power

Power Source

Quantity

Nominal Cooling Capacity

Nominal Heating Capacity

Quantity

Compressor

Type

CondenserMotor

Type

Number of Refrigerant Circuit

Operation Control

Condenser

Operation Weight

Evaporator

Type

Quantity

Unit Weight

1120

Refrigerant

Type

Dimension (Single Module)

Page 15: AIR COOLED MODULAR CHILLER - Contekthe refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this,

Page 14

General Data - FCA - NH Series (R410A)

Note: 1. Product are tested in accordance to GB/T18430.1-2001 2. Cooling capacity is based on 12°C entering and 7°C leaving water temperature, 35°C ambient temperature. 3. Heating capacity is based on 40°C entering and 45°C leaving water temperature, 7°C ambient temperature. 4. The manufacturer reserves the rights to make changes to the above specifications without prior notice.

FCA 207NH 208NH 209NH 210NH 211NH

kW 433.7 495.6 557.6 619.5 681.5

kW 454.2 519.1 584.0 648.9 713.8

Cooling kW 147.0 168.0 189.0 210.0 231.0

Heating kW 153.0 174.8 196.7 218.5 240.4

V/Ph/Hz

14 16 18 20 22

Oil Amount L 39.2 44.8 50.4 56.0 61.6

14 16 18 20 22

14 16 18 20 22

Charging Mass kg 129 134 139 144 149

14 16 18 20 22

Input Power kW 10.5 12.0 13.5 15.0 16.5

Rotational Speed RPM 715 715 715 715 715

Diameter mm 710 710 710 710 710

7 8 9 10 11

Water Flow Rate m3/h 74.8 85.4 96.1 106.8 117.5

Water Pressure Drop kPa 170.0 180.0 190.0 200.0 210.0

Water Pipe DN

Length mm

Width mm

Height mm

kg 3500 4000 4500 5000 5500

kg 3780 4320 4860 5400 5940Operation Weight

Evaporator

Type

Model

Condenser

Unit Weight

Refrigerant

Type

Dimension(Single Module)

Quantity

Quantity

Quantity

Compressor

Type

CondenserMotor

Type

Number of Refrigerant Circuit

Stage of Capacity Control

Nominal Cooling Capacity

Nominal Heating Capacity

Operation Control

Nominal Input

Power

Power Source 380 / 3 / 50

LCD Wired Micro-Computer or Manual Control

Seamless Inner Groove Copper and Hydrophilic Fin

Plate Heat Exchanger

Propeller Fan

R410A

Hermetic Scroll

1120

1440

1940

DN40, Female Union

Page 16: AIR COOLED MODULAR CHILLER - Contekthe refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this,

Page 15

Note: 1. Product are tested in accordance to GB/T18430.1-2001 2. Cooling capacity is based on 12°C entering and 7°C leaving water temperature, 35°C ambient temperature. 3. Heating capacity is based on 40°C entering and 45°C leaving water temperature, 7°C ambient temperature. 4. The manufacturer reserves the rights to make changes to the above specifications without prior notice.

FCA 212NH 209+303NH 206+306NH 203+309NH 312NH

kW 743.4 865.7 987.9 1110.2 1232.4

kW 778.7 923.8 1068.9 1213.9 1359.0

Cooling kW 252.0 294.9 337.8 380.8 423.7

Heating kW 262.2 312.7 363.1 413.6 464.1

V/Ph/Hz

24 30 36 42 48

Oil Amount L 67.2 84.0 100.8 117.6 134.4

24 24 24 24 24

24 24 24 24 24

Charging Mass kg 154 154 154 154 154

24 24 24 24 24

Input Power kW 18.0 20.1 22.2 24.3 26.4

Rotational Speed RPM 715 715 715 715 715

Diameter mm 710 710/800 710/800 710/800 800

12 12 12 12 12

Water Flow Rate m3/h 128.2 149.3 170.3 191.4 212.5

Water Pressure Drop kPa 220.0 220.0 220.0 220.0 220.0

Water Pipe DN

Length mm

Width mm

Height mm

kg 6000 6540 7080 7620 8160

kg 6480 7050 7620 8190 8760

Model

1440

1940

DN40, Female Union

380 / 3 / 50

LCD Wired Micro-Computer or Manual Control

Seamless Inner Groove Copper and Hydrophilic Fin

Plate Heat Exchanger

Propeller Fan

R410A

Hermetic Scroll

Stage of Capacity Control

Nominal Input

Power

Power Source

Quantity

Nominal Cooling Capacity

Nominal Heating Capacity

Quantity

Compressor

Type

CondenserMotor

Type

Number of Refrigerant Circuit

Operation Control

Condenser

Operation Weight

Evaporator

Type

Quantity

Unit Weight

1120

Refrigerant

Type

Dimension (Single Module)

General Data - FCA - NH Series (R410A)

Page 17: AIR COOLED MODULAR CHILLER - Contekthe refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this,

Page 16

General Data - FCA - F Series (R22)

Note: 1. Product are tested in accordance to GB/T18430.1-2001 2. Cooling capacity is based on 12°C entering and 7°C leaving water temperature, 35°C ambient temperature. 3. Heating capacity is based on 40°C entering and 45°C leaving water temperature, 7°C ambient temperature. 4. The manufacturer reserves the rights to make changes to the above specifications without prior notice.

FCA 201FH 202FH 203FH 204FH 205FH 206FH

kW 61.4 122.9 184.3 245.7 307.1 368.6

kW 69.3 138.6 207.9 277.2 346.5 415.8

Cooling kW 20.5 41.2 61.7 82.3 102.9 123.5

Heating kW 21.6 43.1 64.7 86.3 107.8 129.4

V/Ph/Hz

2 4 6 8 10 12

Oil Amount L 6.5 13.0 19.5 26.0 32.5 39.0

2 4 6 8 10 12

2 4 6 8 10 12

Charging Mass kg 18 36 54 72 90 108

2 4 6 8 10 12

Input Power kW 1.5 3.0 4.5 6.0 7.5 9.0

Rotational Speed RPM

Diameter mm

2 4 6 8 10 12

Water Flow Rate m3/h 10.6 21.2 31.8 42.4 53.0 63.5

Water Pressure Drop kPa 96.0 103.0 109.0 115.0 120.0 125.0

Water Pipe DN

Length mm

Width mm 1030 2060 3090 4120 5150 6180

Height mm

kg 740 1480 2220 2960 3700 4440

kg 799 1598 2397 3197 3996 4795Operation Weight

Evaporator

Type

Model

Condenser

Unit Weight

Refrigerant

Type

Dimension

Quantity

Nominal Cooling Capacity

Nominal Heating Capacity

Quantity

Compressor

Type

CondenserMotor

Type

Number of Refrigerant Circuit

Operation Control

715

710

Stage of Capacity Control

Nominal Input

Power

Power Source

Quantity

2063

2206

DN40, Female Union

380 / 3 / 50

LCD Wired Micro-Computer or Manual Control

Seamless Inner Groove Copper and Hydrophilic Fin

Plate Heat Exchanger

Propeller Fan

R22

Hermetic Scroll

Page 18: AIR COOLED MODULAR CHILLER - Contekthe refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this,

Page 17

General Data - FCA - F Series (R22)

Note: 1. Product are tested in accordance to GB/T18430.1-2001 2. Cooling capacity is based on 12°C entering and 7°C leaving water temperature, 35°C ambient temperature. 3. Heating capacity is based on 40°C entering and 45°C leaving water temperature, 7°C ambient temperature. 4. The manufacturer reserves the rights to make changes to the above specifications without prior notice.

FCA 207FH 208FH 209FH 210FH 211FH 212FH

kW 430.0 491.2 552.8 614.3 675.7 737.1

kW 485.1 554.4 623.7 693.0 762.3 831.6

Cooling kW 144.1 164.6 185.2 205.8 226.4 247.0

Heating kW 151.0 172.5 194.1 215.7 237.2 258.8

V/Ph/Hz

14 16 18 20 22 24

Oil Amount L 45.5 52.0 58.5 65.0 71.5 78.0

14 16 18 20 22 24

14 16 18 20 22 24

Charging Mass kg 126 144 162 180 198 216

14 16 18 20 22 24

Input Power kW 10.5 12.0 13.5 15.0 16.5 18.0

Rotational Speed RPM

Diameter mm

14 16 18 20 22 24

Water Flow Rate m3/h 74.1 84.7 95.3 105.9 116.5 127.1

Water Pressure Drop kPa 130 135 140 145 150 155

Water Pipe DN

Length mm

Width mm 7210 8240 9270 10300 11330 12360

Height mm

kg 5180 5920 6660 7400 8140 8880

kg 5594 6393 7193 7992 8791 9590

2063

2206

DN40, Female Union

Model

380 / 3 / 50

LCD Wired Micro-Computer or Manual Control

Seamless Inner Groove Copper and Hydrophilic Fin

Plate Heat Exchanger

Propeller Fan

R22

Hermetic Scroll

715

710

Stage of Capacity Control

Quantity

CondenserMotor

Type

Number of Refrigerant Circuit

Condenser

Refrigerant

Nominal Input

Power

Power Source

Quantity

Nominal Cooling Capacity

Nominal Heating Capacity

Compressor

Type

Operation Control

Type

Dimension

Operation Weight

Evaporator

Type

Quantity

Unit Weight

Page 19: AIR COOLED MODULAR CHILLER - Contekthe refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this,

Page 18

General Data - FCA - ECA Series (R22)

Note: 1. Product are tested in accordance to GB/T18430.1-2001 2. Cooling capacity is based on 12°C entering and 7°C leaving water temperature, 35°C ambient temperature. 3. The manufacturer reserves the rights to make changes to the above specifications without prior notice.

FCA 201ECA 202ECA 203ECA 204ECA 205ECA 206ECA

kW 61.8 123.5 185.3 247.0 308.8 370.6

Nominal Input Power kW 20.6 41.2 61.7 82.3 102.9 123.5

V/Ph/Hz

2 4 6 8 10 12

Oil Amount L 6.5 13.0 19.5 26.0 32.5 39.0

2 4 6 8 10 12

2 4 6 8 10 12

Charging Mass kg 18 36 54 72 90 108

2 4 6 8 10 12

Input Power kW 1.5 3.0 4.5 6.0 7.5 9.0

Rotational Speed RPM

Diameter mm

1 2 3 4 5 6

Water Flow Rate m3/h 10.6 21.3 31.9 42.6 53.2 63.9

Water Pressure Drop kPa 96 103 109 115 120 125

Water Pipe DN

Length mm

Width mm 1030 2060 3090 4120 5150 6180

Height mm

kg 740 1480 2220 2960 3700 4440

kg 799 1598 2397 3197 3996 4795Operation Weight

Evaporator

Type

Quantity

Unit Weight

Dimension

Model

Refrigerant

Type

Nominal Cooling Capacity

Operation Control

Power Source

Compressor

Type

Quantity

710

Stage of Capacity Control

R22

CondenserMotor

Type

Number of Refrigerant Circuit

Condenser

Quantity

2063

2206

DN40, Male Union

380 / 3 / 50

LCD Wired Micro-Computer or Manual Control

Seamless Inner Groove Copper and Hydrophilic Fin

Shell and Tube Heat Exchanger

Propeller Fan

Hermetic Scroll

715

Page 20: AIR COOLED MODULAR CHILLER - Contekthe refrigerant temperature before entering the evaporator allow FCA-FH series operates heating mode at low ambient temperature. Other than this,

Page 19

General Data - FCA - ECA Series (R22)

Note: 1. Product are tested in accordance to GB/T18430.1-2001 2. Cooling capacity is based on 12°C entering and 7°C leaving water temperature, 35°C ambient temperature. 3. The manufacturer reserves the rights to make changes to the above specifications without prior notice.

FCA 207ECA 208ECA 209ECA 210ECA 211ECA 212ECA

kW 432.3 494.1 555.8 617.6 679.4 741.1

Nominal Input Power kW 144.1 164.6 185.2 205.8 226.4 246.9

V/Ph/Hz

14 16 18 20 22 24

Oil Amount L 45.5 52.0 58.5 65.0 71.5 78.0

14 16 18 20 22 24

14 16 18 20 22 24

Charging Mass kg 126 144 162 180 198 216

14 16 18 20 22 24

Input Power kW 10.5 12.0 13.5 15.0 16.5 18.0

Rotational Speed RPM

Diameter mm

7 8 9 10 11 12

Water Flow Rate m3/h 74.5 85.2 95.8 106.5 117.1 127.8

Water Pressure Drop kPa 130 135 140 145 150 155

Water Pipe DN

Length mm

Width mm 7210 8240 9270 10300 11330 12360

Height mm

kg 5180 5920 6660 7400 8140 8880

kg 5594 6393 7193 7992 8791 9590

Model

2063

2206

DN40, Male Union

380 / 3 / 50

LCD Wired Micro-Computer or Manual Control

Seamless Inner Groove Copper and Hydrophilic Fin

Shell and Tube Heat Exchanger

Propeller Fan

R22

Hermetic Scroll

710

Stage of Capacity Control

Power Source

Quantity

Number of Refrigerant Circuit

Operation Control

Condenser

715

Refrigerant

Type

Dimension

Nominal Cooling Capacity

Quantity

Compressor

Type

CondenserMotor

Type

Operation Weight

Evaporator

Type

Quantity

Unit Weight