Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
HEAD OFFICEStathe Road, Burrowbridge, Somerset, TA7 0RYTel: 01823 690 292 Fax: 01823 690 291Email: [email protected]
Air
+ PI
V P
osit
ive
Inpu
t Ve
ntila
tion
Air+ PIV Positive Input Ventilation4
Air+ PIV gently operates in the background, pushing out stale humid air and
replacing it with fresh filtered air from outside. Located in the loft, Air+ PIV draws
fresh air into the loft cavity where it is filtered and warmed before being gently
added into the habitable areas of the house. Positive Input Ventilation (PIV) is
proven to reduce both condensation and mould as well as dangerous levels of
radon in specific areas of the UK.
Continuous in operation and circulating air around the house from a central
diffuser, PIV is the perfect solution for retro fitting in older properties. In most
properties, the loft gains natural warmth from heat rising up from the property and
from solar heat transferring through the roof tiles. Air+ PIV aids in reducing fuel
bills by recycling heat that would normally be lost through the roof, instead adding
it back to the property through the filtered air.
Once installed, Air+ PIV will push contaminated air out of the property through
trickle vents installed in windows and also natural leakage points such as under
doors and key holes. In its place, clean filtered air will dry out the fabric of the
building, reducing the condensation that causes damaging mould.
When installed into the ceiling Air+ PIV works as a whole house solution. When
required, additional fans can be used in wet rooms specifically en-suites and utility
rooms that are not off the central hallway. These fans help create negative
pressure, which aids drawing the fresh filtered air into all sections of the home.
Air+ PIV has been designed with protection in mind. Protection for both resident
and property make it the best solution for mould and condensation control for
existing Social Housing properties. Airtech’s unrivaled solution based offering
gives you the confidence that we can solve any condensation and mould problem.
We even back all anti mould treatment with our 3 year no return guarantee.
Whisper quiet in operation, Air+ PIV is guaranteed to be installed easily and first
time without the need for costly return visits, keeping disruption to residents at a
minimum.
Air+ PIV is simple to install and comes with an anti-vibration base for joist
mounting a traditional hanging kit.
www.airtechenvironmental.co.uk
Air+ PIVPositive Input Ventilation
Air+ PIV is supplied with an energy efficient preheater to temper incoming air. Designed to stop heat loss in the duct, Air+ PIV increases input air temperature by up to four degrees vs other traditional PIVs available. Easy fix anti-vibration base and hanging kit supplied as standard.
Integral dynamic controls allow for bespoke installation set up as well as data recall showing running conditions and unit performance.
High grade G4 or F7 filters offer industry leading levels of filtration. Filter efficiency is also displayed via the front display.
The new low profile diffuser with sound cancelling technology can be cleaned easily and directs air away from fire alarms and walls. Models are available for condensation & mould or radon control.
Special Features
• Energy efficient – consumes as low as 2.2 Watts
• Electronic feedback to the motor ensures constant flow rate
• DC motor for quiet operation
• Diffusers designed to minimise draughts
• Preheat facility as standard
• 10 preset air speeds
• Adjustable heater operational point between 5-20°C
• Blocked filter indication
• Can be fitted to joist using the easy fix anti-vibration base or hung from rafters in the loft
General
• Robust construction
• Solid state electronics with high efficiency switching power supply
• Preheat can be manually selected
• Electronic controller automatically monitors temperature of introduced air and activates pre heat to maintain comfort levels.
• Long life large filtration (over 5m²)
• 5 year guarantee
• Displays filter efficiency via display
Benefits
• Very quiet
• Lower energy costs for tenant in keeping with Government Directive regarding energy efficient appliances in Social Housing
• Helps to alleviate condensation
• Reduces radon
• Low maintenance
• BRE Digest 390 compliant
www.airtechenvironmental.co.uk
HEAD OFFICEStathe Road, Burrowbridge, Somerset, TA7 0RYTel: 01823 690 292 Fax: 01823 690 291Email: [email protected]
Air+ PIVPositive Input Ventilation
ConstructionHousings are manufactured from injection moulded ABS with heater mount moulded with V-0 flame retardant ABS. Air+ PIV tested to BS-EN 60335-1 and comes with a lifetime warranty on product housing. Product compliant with EMC, ROHS & WEEE Regulations.
Filter
Rating performance 10 micron 5 micron 1 micron 0.5 micron 0.1 - 0.3 micron
G4 98% 92% 58% 35% 5%
F7 99.9% 99% 88% 72% 55%
Product Performance
Supply Volume:
Preset Bedrooms Air flow litres/sec Wattage
Trickle Boost
1 13 25 3.6
2 17 31 4.8
3 21 38 5.5
4 25 44 7.5
5 29 50 11.5
Manual selection 10-60
InstallationFitted in the roof void and ducted via a circular air diffuser mounted in the ceiling above a stairwell. All units are fitted with a preheat facility and the heater is activated automatically when the incoming air drops below the pre-selected set point. This can be manually changed to between 5 to 20°c to suit the residents' requirements.
FAN DIMENSIONSUnit casing (mm) 365 x 446 x 309 (HxDxW)
Unit diffuser ceiling hole diameter (mm) 200
ELECTRICAL VOLTAGE220/240v AC
ORDER CODE
DPPSL/H Loft unit
DPPSL/HR Loft unit for Radon control
475664 Fire damper diffuser - Fire rated to 1 hour
SPECIFICATION KEY FACTS
• Low wattage unit
• 5 year guarantee as standard
• Energy efficient preheater