AIT ARINC664 Shortform Download

  • Upload
    caport

  • View
    219

  • Download
    0

Embed Size (px)

Citation preview

  • 7/26/2019 AIT ARINC664 Shortform Download

    1/4

    Avionics Interface Technologies

    3703 N. 200th Street

    Omaha, NE 68022

    Tel: +1 402.769.9644

    Fax: +1 402.763.9645

    DATABUS SOLUTIONSfor tomorrow's demands

    ARINC 664 PART 7

    Product Overview

    Avionics Interface Technologies

    3703 N. 200th Street

    Omaha, NE 68022

    Tel: +1 402.763.9644

    Fax: +1 402.763.9645

    KEY FEATURES Supports IEEE 802.3 10/100/1000 Mbit/s Full-Duplex

    Ethernet links Utilizes SFPs to support both copper and optical

    interfaces Multiple form factors: PXI/cPCI, PCI, PCI Express,

    PMC, and XMC Simulates multiple ARINC 664 End Systems,

    including VL traffic shaping and input VLredundancy management

    Standard Ethernet operations simultaneous to ARINC664 operations

    Supports up to 128 Output VLs and 512 Input VLs Supports up to 1024 Sampling & Queuing output

    message ports and up to 4096 input Sampling &Queuing message ports

    Upper layer protocol handling (A653, UDP, IP)managed onboard

    Provides DMA for high data rate applications Time-stamping of all received messages with 8 nSresolution

    Optional promiscuous mode allows capture of allnetwork traffic for protocol analysis and datalogging applications

    Windows XP/7, Linux, VxWorks and LabVIEW RealTime Drivers & APIs provided (other OS support onrequest)

    Easy setup and configuration using AITs XML basedARINC 664 End System configuration tools

    The AIT family of ARINC 664 Test & Simulation products provide solutions supporting both the

    conventional 10/100 Mbit/s ARINC 664 Ethernet interfaces as well as the next generation 1

    Gbit/s Ethernet interface supporting the widest range of existing and emerging ARINC 664 and

    Ethernet Test & Simulation application requirements.

    ARINC 664 TEST INSTRUMENTSThe AIT ARINC 664 Test & Simulation instruments arecapable of supporting the simulation of multiple ARINC664 End Systems on a single hardware module. Severalform factors are available including:

    PCI/PCI-X PCI Express PXI & Compact PCI PMC XMC

    All of the ARINC 664 Test & Simulation modules utilize anFPGA based architecture, with multiple embeddedprocessors, in order to support protocol error injectionand to off load all upper layer protocol processing (ARINC653, UDP, IP) from the host system. All ARINC 664protocol operations, including VL traffic shaping,

    redundancy management, and IP fragmentation andreassembly, are handled onboard. Additionally, allmodules use DMA to provide optimal data throughput.

    COMPLETE & ROBUST SOFTWARE SUPPORTSoftware support for Windows, Linux, VxWorks, andLabVIEW Real-Time is provided with the ARINC 664Software Development Kit (SDK). Configuration ofsimulated End Systems is made easy with AITs simpleand intuitive XML based configuration data and FlightSimulyzer GUI application.

  • 7/26/2019 AIT ARINC664 Shortform Download

    2/4

    ARINC 664 OUTPUT OPERATIONSThe AIT ARINC 664 modules allow the simulation ofmultiple ARINC 664 End Systems. The modules can beconfigured to handle ARINC 664 VL traffic shaping for upto 128 output VLs. For each VL the source (MAC) addressis individually configurable allowing output traffic toemulate multiple source End Systems.

    The IP, UDP, and ARINC 653 upper protocol layers arefully managed on-board. IP fragmentation is managed by

    the module, as well as VL sequence numbers andredundant data transmission, with no additional hostloading.

    The configuration and use of up to 1024 output messageports is supported. The message ports can be configuredas ARINC 653 Sampling & Queuing ports, UDP ServiceAccess Ports (SAP), IP Ports, or MAC ports providingaccess to all protocol layers in support error injectionand flexible output operations.

    Optionally, the modules may be used in a replay mode tore-transmit previously captured network traffic fromstandard industry capture files (PCAP).

    In addition to ARINC 664 output operations, the ARINC664 modules also support the simultaneous output ofstandard Ethernet frames.

    ARINC 664 INPUT OPERATIONSThe AIT ARINC 664 modules provide full onboard supportfor ARINC 664 integrity checking and redundancymanagement operations. These operations can beindividually configured for each input VL, providing aflexible approach that supports a wide variety of dataacquisition and analysis applications. In addition tosupporting up to 512 input VLs the modules can also beconfigured to operate in promiscuous mode to capture allnetwork traffic. All captured data is time tagged with 8

    nS resolution.

    The IP, UDP, and ARINC 653 upper protocol layers arefully managed onboard. IP reassembly is fully managedby the module and requires no host loading or memoryresources. The module supports up to 4096 inputmessage ports. Each message port can be configured asARINC 653 Sampling & Queuing ports, UDP Service AccessPorts (SAP), IP Ports, or MAC ports providing the testapplication a flexible approach, allowing error detectionand access to all protocol layers . The incoming messagesto each port are buffered on-board and require no hostresources.

    aviftech.com/664 [email protected]

    ARINC 664 ONBOARD PROTOCOL STACKAll of the AIT ARINC 664 modules provide full onboard support for the Ethernet MAC, IP, UDP, and ARINC 653 Sampling& Queuing protocol layers. No host resources are used for protocol overhead such as IP fragmentation and reassembly.All data can be buffered onboard requiring host interaction only when the application program wishes to read thelatest data or write updated output. Additionally, the user application has access to all protocol layers providing aflexible approach to support a wide variety of test application requirements.

  • 7/26/2019 AIT ARINC664 Shortform Download

    3/4

  • 7/26/2019 AIT ARINC664 Shortform Download

    4/4

    AITs ARINC 664 SOFTWARE DEVELOPMENT KIT

    AIT's ARINC 664 ES SDK provides a complete suite of ARINC 664 software API's and ARINC 664

    and Ethernet ES configuration tools to support intuitive and efficient development and

    integration of ARINC 664 applications.

    MULTIPLE OPERATING SYSTEMSThe ARINC 664 SDK provides Drivers and APIs for a varietyof Operating System platforms:

    Microsoft Windows XP and Windows 7 Linux VxWorks LabVIEW Real-Time Other RTOSs on request (LynxOS, Integrity, ...)

    ARINC 664 END SYSTEM APIAt the core of the ARINC 664 ES SDK is the A664 ES API.The ES API is a standard C API which provides read/writeaccess to the messaging port interfaces of the ARINC 664

    ES hardware modules. Applications utilize this API tosend and receive data from Sampling & Queuing ports.Additionally, the ES API provides access to standard UDPports and also allows access directly to the IP and MAClayers.

    LabVIEW Real-Time INSTRUMENT DRIVERThe ARINC 664 SDK includes AITs ARINC 664 LabVIEWInstrument Driver which is an easy to use LabVIEW VIinterface to the features and functions of the ARINC 664modules. The LabVIEW instrument driver is capable ofimporting and utilizing the complex ARINC 664 networkconfigurations created using the End SystemConfiguration Tools.

    END SYSTEM CONFIGURATION TOOLSIn all ARINC 664 networks, to achieve optimalperformance and deterministic operations, all networkcomponents (End Systems & Switches) must be staticallyconfigured prior to the beginning of operations. TheARINC 664 configurations are complex and composed oflarge amounts of data parameters needed to configurethe multiple associated protocol layers, including A664VLs, IP, UDP, and A653 message ports.

    The AIT ARINC 664 ES Configuration Tools provide asimple, yet flexible, approach to configuring the ARINC664 End Systems. Based on a core ARINC 664 ES XMLschema, the ES Configuration Tools provide the

    application developer several options for creating ARINC664 ES device configurations.

    The A664 Configuration Compiler is a command lineapplication which compiles ARINC 664 ES XMLconfigurations into loanable device configurations

    The A664 ES Configuration Library provides anobject oriented (C++) API which can be used toprogramatically create the ARINC 664 ESconfigurations

    Flight Simulyzer (A664) provides a Windows GUIapplication that allows users to create ARINC 664 ESconfigurations using a common Windows userinterface application

    Avionics Interface Technologies3703 N. 200th StreetOmaha, NE 68022Tel: +1 402.763.9644Fax: +1 402.763.9645

    aviftech.com/664

    [email protected]

    3 N o v 2 0 1 4 D o c N o . 4 0 3 0 8 0 0 1 v 0 1 . 0 1 . 0 1 2 0 1 4 A v i o n i c s I n t e r f a c e T e c h n o l o g i e s