AlaskaMeasures of Progress

Technology DirectorsJanuary 8th, 2015

James Herynk and Nick Studt

Webinar Logistics:

• Audio will be streamed through Adobe Connect.

• Audio is also available by calling 877-278-8686 Pin: 961449— If using the phone as the audio source, MUTE the Adobe connect sound to

prevent feedback. On the phone, press *7 to mute yourself.

• Please hold questions until the end.

• All questions must be asked through the chat box in the bottom right corner.

Overview

• Review of past topics• Resources• KITE Client• Updates to Educator Portal and KITE• AMP It Up Day• Local Caching Server (LCS)

—Release—Modes—Setup

• Whitelisting• Help Desk

Review of Past Topics

• KITE Educator Portal vs. KITE Client• Upload: Users, Enrollment, Rosters,

TEC• Add Manually: Users, Enrollment,

Rosters• Edit: Users, Enrollment, Rosters

Resourcesakassessments.org

A. KITE Client• Windows • Macintosh• iPad• Chromebook

B. Educator Portal (Updated Dec. 19)• Educator Portal Manual• Educator’s Guide to KITE Client• .CSV Templates for Users, Enrollment, Rosters, TEC

C. Local Caching Server (Will Update Feb. 6)

• Manuals for Mac, Windows, and Linux• Request the Local Caching Server (LCS) Software

KITE Client: Install

• Now available for all supported platforms• Go to AMP website akassessments.org

—Select the KITE tab• Windows (AMP)• Macintosh (AMP)• iPad (AMP - iTunes)• Chromebook (Device - Chrome Web Store)

– Unmanaged - Kiosk (chrome://extensions)– Managed – Kiosk (Pre-Installed Apps and Extensions)

Note: installing the new version will replace the old version.

KITE Client: Important to Notes on Installation

• Macintosh—There is a difference in adjusting

security preferences between OS 10.9+ and 10.8- as noted in the KITE Client Installation Guide.

• Chromebook—KITE Client on Chromebook, both

unmanaged and managed, requires Kiosk Mode be set to prevent students from exiting KITE Client during testing. Be sure and follow the KITE Client Installation Guide to set Kiosk Mode.

Dec 19th: EP Release, KITE Updates, Documentation

• Test Record/TEC Report Data Extract• PNP settings adjustments “Spoken Audio”

—Non Visual (no longer an option)—Text Only (no longer an option)—Subject selection for Read Aloud

• Math only• Math and ELA

—All students will have Read Aloud for directions

• New upload limit of 5k entries• Chrome is now supported for Educator

Portal• OS 10.10 is now supported

Educator Portal: Dec 19th release.

• Updated Educator Portal Manual—Change log at the end of each chapter—Table of contents now links—Report data extracts

• Updated Educator’s Guide to KITE Client —Change log at beginning of Educator Guide

• KITE Client—TTS player is now integrated—Enhanced Notes saves across sections of a

test

AMP it Up Day

• AMP It Up Day is scheduled for Jan. 29th.• EED webinar for Amp It Up Day

planned for Jan. 14th at 3:30.• How to Prepare?

—Have KITE Client installed on machines where students will test.

—If using an LCS, have the LCS running and KITE Client testing machines pointed toward the LCS.

Local Caching Server (LCS)

• A local computer or server that is set up to store data from students testing in KITE Client and then send that data all at once.• We suggest this is set up on a

dedicated computer with a fixed IP address.

LCS: 2015

• Release planned for February 6th, 2015• Expansion of the LCS Admin features

—Two Modes• Semi-Offline• Fully Offline

• Ability to begin testing with no internet if tests have been downloaded to the LCS• LCS-2014 will no longer work once the

LCS- 2015 is available.

LCS: What if you already have the 2014 installed?

• Delete the LCS-2014 file from the directory. This should be done before downloading the new LCS-2015.• After installing the new LCS, there is

nothing you need to do for the KITE Client machines as long as the LCS IP address is the same. • LCS-2015 cannot be installed while

students are testing on LCS-2015.

LCS: Semi-Offline Mode

• This is how the current LCS functions

LCS: Fully Offline Mode

LCS: Reasons to Use Fully Offline Mode

• No internet will be available the day of testing.

• Internet is expected to be unreliable do to weather, maintenance by your service provider, or limited bandwidth due to other local event.

• Remote location with no internet where testing machines and LCS machine will be delivered.

• Limited bandwidth

LCS: Semi-Offline vs. Fully Offline Modes

• We suggest you set up the LCS in one mode and stick with it throughout testing.• In most cases, Semi-Offline is sufficient.

—Protection against temporary loss of Internet

—Variable Internet—Low bandwidth

LCS: Bandwidth Usage Estimates

LCS: Getting Startedakassessments.org

1. System Requirements• Processor• Ram• Disk space

2. Request LCS Software Download• Submit form

3. Check email for download link• Also write down your Username and Password

for the Admin page

LCS: Email with Download

• The LCS Download File—Windows LCS is a ZIP file, extract to C: drive—Macintosh LCS is a DMG file, copy to Applications

LCS: Setup

1. Configuring the Properties File• Identify the IP address and port

2. Configure the Settings.js File• Semi-Offline-Do nothing• Full Offline-Change “exports.offline” to True

3. Allowing Access through your Firewall• Identify the port or application, allowing the

testing machines access to the LCS

4. Starting the LCS• Open folder or application to run or start• Note: may require administrator password

• Test the LCS Settings—Enter the LCS Server IP Address and the

Port Number into a Firefox browser

LCS: Test the Setup

• Test the LCS Settings—Enter the LCS Server IP Address and the

Port Number into a Firefox browser

LCS: Test the Setup

LCS: Point the Testing Machines toward the LCS

• Configure each testing machine with the IP Address and Port of the LCS

—Refer to the KITE Client Installation Guides:• Windows (p. 5)• Macintosh (p. 5)• Chromebook

– Unmanaged – Kiosk Mode (p. 4)– Managed – Kiosk Mode (p. 8)

• iPad (p. 5)

—akassessments.org

LCS: Admin Logging In

• Open the LCS Admin Page—In a browser address bar enter:

• IP address:port number/TDE/admin/index.htm

—Enter username and password from email

LCS: Admin Dashboard

LCS: Admin in Fully Offline, Fetch Student Tests

LCS: Shutdown

• You may want to shutdown the LCS computer during breaks or for routine computer maintenance.

1. When testing has finished2. Open folder/application and “stop” the

LCS3. System administrator password may be

needed

Note: testing machines do not need to be reconfigured upon proximate setup, (unless you have rotating IP address).

LCS: Restarting After a Power Outage

1. Turn on computer2. Follow instructions for starting the

LCS

Whitelisting

• To ensure your firewall will allow data to pass through to our servers (AAI/CETE/KITE), please whitelist the following at your location:

—*.cete.us & @ku.edu

• It may also help to allow the following files access through the firewall: 

—kiteclientae.exe & kiteclient.exe & tde.exe

• For continued error messages, under Network Address Translation (NAT),

—send the Helpdesk your IP address/range: amp-support@ku.edu

—whitelist our IP addresses (CDN, Content Delivery Network)

Upcoming Webinars

District Test Coordinators January 12th, 2015Technology Directors February 12th, 2015District Test Coordinators February 17th, 2015

Help Desk

• Hours—M-F—5:00 am to 4:00 pm Alaska—8:00 am to 7:00 pm Central

• Email amp_support@ku.edu

• Phone—785-864-3537—855-277-9752 (toll-free)

THANK YOU!