Terms & Conditions

All prices subject to VAT unless otherwise stated. All offers are subject to availability & while stocks last. All pictures shown are for illustration purposes

only. Whilst every possible care has been taken to ensure the information within this brochure was accurate at the time of going to print, Alba Diagnostics

cannot accept any liability for any possible errors. Offers last until Wednesday 28th February 2015.

Distributer Stamp

PAGE 3

NEW YEAR OFFERS January - February 2015

sales@albadiagnostics.com | www.albadiagnostics.com

INNOVATIVE WORKSHOP SOLUTIONS

FWD HUB BEARING KIT Part No. ALB70970

£79.95 List £135.00

• Universal kit to service most front wheel drive bearing kits • Removes & installs wheel bearing • Installs front hubs • 9x Bearing adaptors 55.5& 84mm, 2x Cups 86 and 91mm, 1x Spacer 38mm, 1x Centre Shaft, Nut, 3x Washers & 1x Cup/ Sleeve 76mm • Supplied in Blow Moulded Case

• For the safe and quick removal & installing of GEN2 type Hub Bearings • Reduces risk of damage to ABS sensor rings • Specially designed centre alignment adaptor to ensure perfect alignment when re-fitting bearings • Hydraulic upgrade option available

HUB & BEARING REMOVER / INSTALLER SET (GEN2; 72, 78 & 82MM) Part No. ALB40215

Applications: • VAG ( 72mm ) - Audi A1, Audi A2, Seat Cordoba, Seat Ibiza, Skoda Fabia, Skoda Roomster, VW Polo, VW Touran • Ford / Volvo ( 78mm ) - Ford Focus II, Ford C-Max, Mazda 3, Volvo C30, Volvo C70, S40, V50

• Ford / LR / Volvo ( 82mm ) - Mondeo 2007 on, Galaxy, S-Max 2006 on, Land Rover Freelander 2 2006 on, • Volvo

- S80, V70, XC60, XC70 2006 on

£795.00 List £1225.00

BEARING PRESS BUSH REMOVAL KIT Part No. ALB40224PK

£249.00 List £399.00

£210.00 List £325.00

SHOCK ABSORBER PULLER KIT Part No. ALB40216 • Makes life easy when working on shock absorbers with internal rebound stop springs • Universal protective clamp retains the piston rod in extended position • Clamp has short & long screws to cover wide range of piston diameters (12-28mm) • Telescopic handle makes it easy to assemble the new piston • Saves time when assembling new shock abosrbers

• Universal protective clamp retains the piston rod in extended position

• Clamp has short & long screws to cover wide range of piston diameters (12- 28mm)

SHOCK ABSORBER PISTON CLAMP Part. No. ALALB40217

Also Available

£59.95

In Use

A workshop kit of Bush Removal Sleeves & Press Support Block for use on Workshop Press

Bearing Press Support - ALB40097

• Press bearings easily on a variety of different suspension arms • The three point contact will guarantee a perfect, safe support

Bush Sleeve Kit - ALB40224 • Universal set of sleeves for removing & installing bushes, bearings etc

• For use in conjunction with Bearing Press Support block and Workshop Press • Standard universal applications: Car, HGV, LCV

• 20 Bush Sleeves – ID range: 34.5 - 72.5mm, OD Range: 43.5 - 82.5mm • Adaptor plate for use with Press Block

SCAN HERE TO WATCH THE VIDEO

SCAN HERE TO WATCH THE VIDEO

2

POWER PROBE HOOK Part No. PPH1

PRESSURE BRAKE BLEEDER Part No. ALB30570

sales@albadiagnostics.com | www.albadiagnostics.com

INNOVATIVE WORKSHOP SOLUTIONS

• Easy one-person operation • Simple hand-pump operation to create pressure • Supplied with ALB30644 European Cap Adapter with swivel elbow 42.8mm, for the majority of European applications • 3 litre capacity • Wide range of optional caps also available

£39.95 List £64.66

£29.95 List £58.35

£335.00 List £395.00

£49.95 List £59.95

£32.95 List £43.44

£149.95 List £267.80

VACUUM BRAKE BLEEDER SET Part No. ALB30558 • 1 litre capacity • Uses standard workshop air supply • Unique rubber joint for fluid extraction (avoids leaks) • Removes fluid via bleed nipples to allow bleeding or entire fluid replacement • Refill bottles have magnetic bases for stability

PRESSURE BRAKE BLEEDER Part No. ALB560TK • Full fluid change can be completed by a single operator in approx. 15 minutes • Portable: operates off 12v supply (vehicle battery) • Capacity 1.25Ltrs • Supplied with ALB30564B multi vehicle cap adaptor kit • Suitable for clutch bleed as well as brake bleed • FREE ALB30630 10PCS Pro Brake Service Kit

BRAKE BLEED WRENCH SET Part No. ALB40207

REFRACTOMETER Part No. ALB30551AB

HOSE CLAMP PLIERS Part No. ALB30883

COOLING SYSTEM TESTER Part No. ALB40046R

• Set of special socket wrenches for loosening & tightening bleed nipples • 8, 10 & 11mm to cover all popular applications • Silicon hose (1.2mtrs) with safety check valve • Ideal for brake bleeding without removing the wheels

• Locate Leaks from: head gaskets, radiator & heater cores, housings, water pumps & hoses • Universal fitment - 24 system & cap adapters • Fast, efficient system testing • Test cap relief pressure & seal condition • FREE ALB30608AB Refractometer

• Tests antifreeze, battery acid, screenwash & AdBLue • Automatic temperature control, no manual adjustment required • Adjustable eyepiece for easy focusing

• Double gear Lock Lever with wide deep gears for secure Locking • Cable adjuster & multiple gear-lock provide accurate & secure locking for any clamp position within range • Allows for removal of plastic & metal self-tightening hose clamps with diameters of 18mm to 54mm

£45.00 List £61.80

3 sales@albadiagnostics.com | www.albadiagnostics.com

£52.95 List £71.07

£19.99 List £29.99

£59.95 List £78.51

£249.00 List £289.00

£46.50 List £62.00

£198.00 List £307.97

WORKSHOP TROLLEY Part No. ALB30952

MULTI STORAGE CONTAINER Part No. ALB40098

OIL DRAINER MANUAL Part No. ALB30537

WASTE OIL DRAINER Part No. ALB30547

SUMP PLUG REPAIR SET Part No. ALB40066

BATTERY TESTER - UP TO 1700CCA Part No. ALB40034CT

• Quality cart for automotive maintenance applications • Push handle moulded into top shelf • 4" Brake Wheels x2 • 4" Moveable Wheels x2 • Will not scratch car finish • Upright aluminium alloy • Dimension 575x460x900mm • Self assembly

• 12 x Clear plastic internal boxes • Ideal for nuts, bolts, screws etc • 3 different sized compartments secure safely to the out carry case • External strap to carry case around easily • Clips on internal storage boxes for attaching to clothing • 300x340x145mm

• No AC/DC power required • Suitable for cars, motorcycles, marine, Industrial etc with 6.7mm dia. & 5.8mm dia. suction probes & 1.2m extension hose • 6 litre capacity • Simple and easy to operate • Portable

• Easy, no mess way to drain & remove vehicle oil • 80 Ltr reservoir • Oil level indicator tube • Telescopic tube adjusts from 1200mm to 1950mm • 4 industrial castors, 2 with brakes • Extra large diameter drain pan & removable filter grid • Safe air discharge of oil from tank, • No lifting, no pouring, no spills

• Repairs sump, gearbox & differential drain plug threads • Tap the damaged thread slightly oversize, then fit new drain plug & washer • Suitable for most popular threads used on most cars & light commercial vehicles • 144 piece kit

• Tests – Starter, Grounding Contact & Alternator • Tests a wide range of batteries including: AGM, VRLA, SMF, GEL etc • Print & save own branded results to PC via USB link, ideal for giving to customers • Reports easily customised • Extremely fast, accurate & consistent results • Illuminated LED display • FREE ALB30719 Maxi Current Tester

INNOVATIVE WORKSHOP SOLUTIONS

4 sales@albadiagnostics.com | www.albadiagnostics.com

INNOVATIVE WORKSHOP SOLUTIONS

£1495.00 List £1955.00

£1479.00 List £1725.00

£269.00 List £385.00

HEAVY DUTY SUSPENSION WORKSTATION KIT Part No. ALB40170KIT2

INDUCTION HEATING SYSTEM PROPLUS Part No. ALB40190

HYDRAULIC WORKSHOP JACK - 3 TONNES LONG REACH Part No. ALB40026

• Auto levelling upper arms allow the machine to work easily on both conical & misaligned springs • Cylinder made from light alloy & nylon resin with fiberglass to avoid corrosion & oxidation • Foot-pedal works only when the safety valve is closed • Supplied with small & large jaws & strut vice • Working pressure: min 6 bar - max 10 bar • Cylinder stroke: 330 mm • Compression force: 1960Kg@ 10 BAR • Ideal for working on conical, side-load & heavy duty springs

KIT INCLUDES SHOCK ABSORBER MASTER TOOL SET

ALB30956

MERCEDES SET ALB40175 • Jaws for C & E Class

TROLLEY NOT INCLUDED

AVAILABLE ON ALB40199

• Effortless: - Fast removal of seized & rusted components, windscreens, bonded body panels, badges, trim...& much more - Flameless heat reduces the need for torches, solvents & abrasives • Safe: - No mains voltage at the handset - 100% safe thermal control re-set & safety trip-out - Quick release coil connections will not come loose - 2500 watts induction power (3x the power of most induction heaters) - Compact hand control - for ease of access Foot pedal operating switch

ACCESSORIES AVAILABLE

• Contents: Induction heater unit- 2500 watts- with mains supply Lead, Hand control with 2.5m cable, Foot pedal, 1.5m Length extension cable, Coils: 1x 22mm vertical coil, 1x 22m horizontal coil, 1x 32mm vertical coil & 1x 1m flexible rope coil, Instruction manual

A High Quality Trolley Jack, with additional Safety Features: • Long reach - 1150cm chassis • Low entry height - 140cm • Max lifting height - 525cm • Low noise Polyamide Wheels • Foot pedal for fast approach lift • "Dead Man" safety lowering system • Safety overload & hydraulic stroke limitation • Made in the EU