Albertslund Ceiling - 100mileny.com100mileny.com/uploads/product/albertslund-ceiling.pdf · The fixture provides characteristic symmetrical and functional lighting. The horizontal

Product descriptionProduct description

Albertslund CeilingAlbertslund Ceiling

ALB-C-1-26W-CF-W-O-RING PRODUCT SPECIFICATION

Weblink: 131 Design: Jens Møller-Jensen

Light Concept: The fixture provides characteristic symmetrical and functional lighting. The horizontal ring reflects the light downwards, but its position also allows some light to slip past and illuminate the ceiling. The anti-glare ring prevents from horizontal glare, and the diffuser is available either as clear or white opal glass, depending on the desired light source.

Finish: Galvanized. Stainless steel, brushed and lacquered. White, powder coated.

Material: Diffuser: Clear glass or white opal glass. Saturn ring: Die cut aluminum, die cut stainless steel or galvanized, die cut steel. Anti-glare ring: Spun aluminum, spun stainless steel or galvanized, extruded steel. Housing: Die cast aluminum.

Mounting: Surface: Mounted directly over a recessed 4” octagonal junction box.

Weight: Max. 6 lbs.

Label: cULus, Wet location. IBEW.

Product code ALB-C

Light source 1/26W/CF GX24q-3 1/100W/A-19/CL medium

Voltage 120-277V 120V

Finish BR ST STEEL GALV WHT

Shade WITH SATURN RING WITHOUT SATURN RING

a. CF variant provided with one 120-277V integral electronic ballast. b. CF variant provided with an opal glass lamp diffuser. c. Incandescent variant provided with clear glass lamp diffuser. d. Incandescent variant only available in 120V.

I. Stainless steel versions are only for indoor use. II. The comparable EU version has the following classification: Ingress Protection Code: IP44.

1/3 Louis Poulsen Lighting | 3260 Meridian Parkway | Fort Lauderdale | FL 33331 | PH:954-349-2525 | Fax: 954-349-2550 | louispoulsen.com

Material descriptionMaterial description




Light measurementsLight measurements




Louis Poulsen Lighting · 3260 Meridian Parkway · Fort Lauderdale, Florida · 33331 954-349-2525 · www.louispoulsen.com

4420

7-I1

10.6”

5.4”

9.5”

9.5”

Light source Voltage Weight Electric shock protection Ingress protection

1/26W/CF GX24q-3 120-277V 6.0 Lbs Cl. II, Wet location IP 44, Grounded1/100W/A-19/CL Medium 120V

Albertslund Ceiling

Design Jens Møller-Jensen

Recommended cleaning substances: Wipe off dust wiht a dry, soft cloth. Remove greasy spots etc. with a soft cloth dampe-ned in lukewarm water (<122° F/ 50° C) with a mild detergent.

Warning: Scouring powder and similar substances will scratch surfaces.

All installation is subject to local code and jurisdiction. Consult a qualified electrician to ensure correct branch circuit conductor. The installer must ensure that the ceiling can support the luminiare’s weight. The installer must if necessary reinforce the ceiling structure by adequate means.

4.3"

4.3"

2.45"

44207-I1

NOTE: FOR WET LOCATION, THE INSTALLERMUST PROVIDE A BEAD OD SILICONEAROUND THE JUNCTION BOX

1

2

3

The installer must ensure to use proper means(rawplugs/screws/expansion bolts) to secure the

The installer must if necessary reinforce the ceilingstructure by adequate means

1 CONNECT WIRES TO JUNCTION BOX IN CEILING

x 3

- Green to Green (ground)- White to White- Black to Black

2

3

4

Use only light sourcein accordance to thelamp replacementlabel on the luminaire

Mount the luminire junction box tothe ceiling, over a 4” junction box ordirectly to the junctionbox(remove knockouts)

4” Octagonaljunction box

RawplugsScrewsExpansion bolts(Not provided)

Albertslund Ceiling

Jens Møller-JensenDesign

The fixture provides characteristic symmetrical and functional lighting. The horizontal ring reflects the light downwards, but its position also allows some light to slippast and illuminate the ceiling. The anti-glare ring prevents horizontal glare. The diffuser is clear or white opal glass, depending on the desired light source.

Concept

Galvanized. Stainless steel, brushed and lacquered. White, powder coated.Finish

Diffuser: Clear glass or white opal glass. Saturn ring: Die cut aluminum, die cut stainless steel or die cut galvanized steel. Anti-glare ring: Spun aluminum, spunstainless steel or extruded galvanized steel. Housing: Die cast aluminum.

Material

Surface: Mounted directly over a recessed 4” octagonal junction box.Mounting

Max. 6 lbs.Weight

cULus, Wet location. IBEW.Label

Product Code

ALB-C

Light source

1/100W/A-19/CL medium

1/26W/CF GX24q-3

Voltage

120-277V

120V

Finish

BR ST STEEL

GALV

WHT

Diff./Encl./Glass

CLEAR

OPAL PAINTED

Shade

WITH SATURN RING

WITHOUT SATURN RING

Info notesSpecification notes

I. Stainless steel versions are only for indoor use.II. The comparable EU version has the following classification: Ingress Protection Code: IP44.

a. CF variant provided with one 120-277V integral electronic ballast.b. CF variant provided with an opal glass lamp diffuser.c. Incandescent variant provided with clear glass lamp diffuser.d. Incandescent variant only available in 120V.



ALB-C-1-100W-INC-W-RING PRODUCT SPECIFICATION






Weight: Max. 6 lbs.


Product code ALB-C


















ALB-C-1-100W-INC-W-O-RING PRODUCT SPECIFICATION






Weight: Max. 6 lbs.


Product code ALB-C


















ALB-C-1-26W-CF-W-RING PRODUCT SPECIFICATION






Weight: Max. 6 lbs.


Product code ALB-C
















Documents

Albertslund Ceiling - 100mileny.com100mileny.com/uploads/product/albertslund-ceiling.pdf · The fixture provides characteristic symmetrical and functional lighting. The horizontal