Upload
hoang-le
View
254
Download
7
Embed Size (px)
Citation preview
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
1/28
Presented by ENG: Ahmed Mohammed Nabieh
Supervised by ENG : Amr Abd Elkreem
Alcatel Lucent BTS
Offline & Commissioning
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
2/28
Introduction
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
3/28
The BTS commissioning & SW files are stored on the station unit module
(SUMA)
The Station unit module is the core of the BTS ,it is responsible for
The O&M Functions such as Alarms reporting ,BTS Configuration,
internal Power Supply control & clock generation and distribution
Transmission functions by connecting the BTS to the BSC through theABIS cable.
The ABIS can carry up to 32 time slots
0 to 30 are assigned to the TRES for normal traffic(voice and Data
services)
31 : is assigned to the OMU in the SUMA card for signaling (Control
information) between BSC & BTS such as Alarm reporting ,BTS
Master file Download, configuration files etc..
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
4/28
LED Color Status Description
OML Yellow On BTS is supervised and connected to the BSC
Blinking BTS & BSC link is being established
Off Link disconnected.
ABIS Yellow On Abis 1 is connected and can serve TCH/Signaling
Blinking There are Alarms on the ABIS
Off Not configured or not used.
O&M Yellow On SUMA master file & configuration are present in theEPROM
Blinking In a transient state, SUMA is loading the BTS MSF &Configuration file from the BSC
Off Not used.
FAULT
RED On Fatal alarm on BTS Module (ANC,TRE etc ..)
Blinking Non-fatal alarm. Such as Faulty Fan unit
Off No alarm.
SUM card led status indication
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
5/28
Offline
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
6/28
Switch the BTS off by pushing down its DC C/BS
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
7/28
Unscrew the ABIS Cable
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
8/28
Open BTS SW and Type
User Name : commte
Password : bts2site
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
9/28
Go to Configuration Click On BTS Software Download
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
10/28
Press the folder icon to start choosing the BTS Files
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
11/28
Select Master File from the BTS SW folder
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
12/28
Select 0CPF File from the BTS SW folder
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
13/28
Wait for the BTS to download all the files ,During the SW
Download the Suma LED Status will be :
OML ,ABIS & O&M Flashing
last file to be downloaded is the OCPF 002 file after that the O&M
will be solid
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
14/28
Commissioning
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
15/28
From Configuration choose BTS Commissioning
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
16/28
Click on Start Commissioning
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
17/28
Notice that the status of the commissioning changed from not
running to running
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
18/28
Edit Q1 address by clicking its start button
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
19/28
Edit Remote Inventory by clicking its start button and pressYES : if the update is already done in the Remote Inventory
panels
NO : if the update is not done in the Remote Inventory panels
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
20/28
Edit Sector Mapping by clicking its start button
Assign sector-ID to each combiner and then press ok
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
21/28
Edit Twin-Settings by clicking its start buttonChoose the mode of each Twin-TRE , usually in our network
we leave at the default which is Dual TRE
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
22/28
Hardware check by clicking its start buttonthe Suma card will start to check the HW available inside
the BTS through the RI-Cable
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
23/28
INIT _ALL_SECT by clicking its start button
the SUMA card will power on all the combiners and TRES to
check their operation
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
24/28
Choose End commissioning ,Stop commissioning window will appear
choose ok after moving all the modules in the selected module window
Wait for the BTS to restart itself SW and then connect the Abis cable.
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
25/28
Finally restart the BTS HWthe SUMA led status should be as following :
Abis & OML are solid
O&M Flashing as the BTS loading its data and RSLs from the BSC
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
26/28
The loading process will take 15 to 20 Minutes ,after that theO&M Led will be solid and the SUMA will initialize the
BTS sectors (Combiners & TRES)
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
27/28
The BTS Terminal program will start to load the BTS Data
Take snapshots and check with OMC
8/11/2019 alcatel lucent bts offline commissioning-130506193728-phpapp02
28/28
Thank You