aleddra · LED Panel Light UFO Highbay Fixture UFO Emergency Battery Pack AC friendly (ballast must be bypassed) Compact design and half the weight of LED Corn Light Up to 80% energy

G6 SureFit® DBA LED Tube

▪ Glass tube with shatter-proof PET coating▪ Safest LED T8 LED retrofit tube in the market▪ Anti-Electric Shock – Dual Safety Switches – Aleddra Patent▪ Anti-Arcing – Aleddra Patent▪ Double-end wired (AC Friendly)▪ Ballast Compatible – Electronic Instant Start▪ Works with shunted and non-shunted sockets(no need to replace sockets)

G3 Emergency T8 Tube T5 LED Integrated Lamp

▪ Operates directly from line voltage▪ Usable as a stand alone fixture▪ Linkable up to 20 feet▪ Suitable for damp locations▪ Good heat dissipation▪ Rated lifetime of 50,000 hrs▪ DLC Listed for utility rebate▪ Dimmable models support only 120V TRIAC dimmer

PLL LED Lamp

LED Cooler Tube Omni A19 Screw-in LED Bulb

▪ 50% energy saving and 75% maintenance reduction▪ Cost-effective▪ Rated for enclosed fixture▪ GX23-2 & G24Q bases are dual-mode: ballast-compatible and line voltage friendly ▪ E26 & GU24 bases are line voltage friendly ▪ Can be installed horizontally or vertically with the same beam spread as traditional lamps

▪ Qualifies for Utility Rebates▪ IP65 rating for moisture proof ▪ LED alternative for refrigerator lighting▪ National grocers, supermarkets, and convenience stores are the perfect target audience for the CoolerTube

aleddra 1Product Catalog4 2 5 . 4 3 0 . 4 5 5 5 | s a l e s @ a l e d d r a . c o m | a l e d d r a . c o m

LED PL Replacement Lamp SureFit® PL Convertible (PLC) Lamp

▪ 2-in-1 tube: regular T8 tube with backup battery ▪ Built-in lithium batteries ▪ Anti-electric shock safety switches - patented ▪ Easy battery shutoff switch for a long stocking time

▪ Ballast bypass (Type B)▪ Target Replacement Lamps: FT40W/2G11▪ Efficacy: 125 lm/w▪ Energy efficient▪ Cost-effective

8-ft Linear Strip Conversion Kit/G13 Socket

▪ Low maintenance cost▪ Suitable for all G13 T8 bi-pin LED tube (double-end LED tube is strongly recommended for safety reasons)▪ Pre-wired conversion kit bracket for easy installation▪ Pre-drilled holes for 8-4I to 2-2I conversion and ballast cover installation▪ Universal driver (110V-277V)

▪ UL Rated▪ Made in Italy▪ Non-shunted sockets▪ Only available at Aleddra!

G2 Emergency T8 Tube

▪ 2-in-1 tube: regular T8 lighting and emergency lighting▪ Built-in lithium batteries▪ Controllable by wall switch▪ Easy shut off switch to prevent power drain ▪ Can be used as a regular LED T8▪ 90 minutes battery power per industry standard

▪ 50% energy saving and 75% maintenance reduction▪ Rated for enclosed fixture▪ Adjustable beam angle up to 90 degree▪ Extensible arm for adjusting lamp position in the fixture▪ Ballast-compatible and line voltage friendly▪ Can be installed horizontally or vertically with the same beam spread as traditional lamps▪ Cost-effective

▪ Dimmable, works with remotes and fan remotes▪ E26, 8W - 60W Equiv - 800 lm▪ 360° beam angle▪ 100% illumination ▪ Same look-and-feel of an incandescent bulb▪ Rated for enclosed fixtures

▪ Easy and quick to install▪ Suitable for retrofit and new construction▪ Suitable for use in damp locations▪ Suitable for standard T-Bar lay-in orsuspended mount applications▪ 0-10V Dimmable▪ Rated lifetime up to 50,000 hours

▪ IP65 rated▪ 100W to 500W▪ Dimmable▪ DLC 4.2▪ Sensors optional▪ Reflector optional

▪ Saves up to 70% energy as compared to existing highbay fixtures▪ Replaces HID metal halide and fluorescent highbay light fixtures▪ 1-10V dimming▪ Rated at 50,000 hours of continuous use▪ Designed for large commercial spaces

Semi-cutoff Wallpack

▪ IP65 Rating▪ No UV or IR in the beam▪ Easy to install and operate▪ Energy saving and long lifespan▪ Instant start, NO flickering, NO humming▪ Ideal for residential/commercial applications▪ Photocell / Surge protector (Optional)

Full-cutoff Wallpack

▪ IP65 waterproof rated, dust, corrosion and pressure-proof▪ High Impact PC Housing (Ik08)▪ No dark spots, uniform luminous surface▪ Excellent heat dissipation▪ Maximum efficacy and minimum glare▪ Can be ceiling or suspension mounted

LED DMD Flood Light

▪ Compact and light weight▪ Wide range of wattage▪ Higher wattage models can be used for sports field lighting▪ Samsung LED diodes▪ 5-year warranty

Gen 4 Shoebox Fixture

▪ Energy-efficient and cost-effective replacement for existing parking lot lighting luminaire▪ Stylish design yields less wind drag, protective cover on the back prevents bird from nesting▪ Light Distribution: Type III▪ Surge protection▪ Photocell and motion senor optional▪ 5-pin NEMA receptacle built-in▪ IP65 wet location

aleddra 2Product Catalog4 2 5 . 4 3 0 . 4 5 5 5 | s a l e s @ a l e d d r a . c o m | a l e d d r a . c o m

Linear Highbay Fixture

UFO Highbay FixtureLED Panel Light

UFO Emergency Battery Pack

▪ AC friendly (ballast must be bypassed)▪ Compact design and half the weight of LED Corn Light▪ Up to 80% energy savings!▪ Cost-effective HID/MH replacement▪ Mounting style: Base-up (BU), Horizontal or Base-Down (BD)▪ 22W & 30W may be used with enclosed fixture with sufficient housing space

HID/MH Replacement Lamp

Tri-proof Vapor Tight

▪ IP65 Rating▪ No UV or IR in the beam▪ Easy to install and operate▪ Energy saving and long lifespan▪ Instant start, NO flickering, NO humming▪ Ideal for residential/commercial applications▪ Photocell / Surge protector (Optional)

▪ Automatic Battery Testing: 30 seconds test monthly and 90 minutes test annually▪ Emergency Operation: 90 minutes▪ Optimized for internal UFO fixture▪ Constant power output on emergency mode▪ One Piece Design with Metal Housing▪ IP65 Rated▪ 2-in-1 waterproof LED test switch and indicator light included

Features

▪ Glass tube with shatter-proof PET coating▪ Anti-arcing technology - patented▪ Anti-electric shock safety switches - patented▪ UL certified for Type A operation with ballast (OOLV #E479597)▪ UL certified for Type B operation with line voltage (IFAR #325073)▪ Double-end wired on AC (reduces retrofit labor cost by 50%)▪ Works with shunted and non-shunted sockets (no need to replace sockets)▪ Flicker-free universal driver (110V-277V)

Description

Size 4-ft

Lens Type Diffused

Ballast Instant Start

Efficacy ≥ 135 lm/w

Color 3000K, 3500K 4000K, 5000K, 6000K

CRI > 80

Input Voltage 110V-277V (50-60Hz)

Operating Temp. -20ºF to 122ºF

Power Consumption

Beam Angle 330º

Warranty 5-year warranty/50,000 hours

Aleddra is pushing the technology envelope of LED retrofit tubes once again with its new G6 (Generation 6) dual-mode SureFit® LED T8 retrofit tube. The G6 full-glass T8 tube comes with dual safety switches on both end caps, which had been documented by a federal agency to be the most effective means of electric shock protection for an LED T8 tube. The G6 tube also incorporates a patented technology that prevents internal arcing, while minimizing the risk of external arcing when used with a ballast. The shatter-proof coating that has been applied to the G6 tube, adds an additional layer of protection against breakage for both the installer and the end user. Like the previous model, the G6 tube is both Type A / Type B with two UL certificates, one for ballast operation and the other for line voltage operation.

Ordering InformationModel #

LLT-4-G-T8-15W-DBA-30KLLT-4-G-T8-15W-DBA-35KLLT-4-G-T8-15W-DBA-40KLLT-4-G-T8-15W-DBA-50KLLT-4-G-T8-15W-DBA-60K

Size

4-ft4-ft4-ft4-ft4-ft

Wattage

15W15W15W15W15W

Lumen

2100lm2100lm2100lm2100lm2100lm

Color

3000K3500K4000K5000K6000Kaleddra

425.430.4555 | [email protected] | [email protected] | www.aleddra.com

Specifications

G6 SureFit® DBA LED Tube Ballast & AC Compatible | 4-ft

AC ~UL Type B (AC 120V-277V, 50/60Hz)

AC ~ BallastUL Type A

Wiring Diagram

Product Compliance & Certifications: ▪ UL Type A listed (OOLV/OOLV7 #E479597)▪ UL Type B classified (IFAR/IFAR7 #E325073)▪ NSF certified▪ DLC

* 4-ft G6 T8 consumes 15 W on AC; when using with high ballast-factor ballast, it consumes 18.5W due to ballast load.

(LED LAMP) E325073 E479597

4-ft @ 15W*

Rev: 6/10/2019

G2 Emergency T8 Tube

Features

Product Model # Wattage Color length LLT-4-EM-T8-G2-15W-30K 15W 3000K 4ftLLT-4-EM-T8-G2-15W-35K 15W 3500K 4ftLLT-4-EM-T8-G2-15W-40K 15W 4000K 4ftLLT-4-EM-T8-G2-15W-50K 15W 5000K 4ftLLT-4-EM-T8-G2-15W-60K 15W 6000K 4ft

aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com

Wiring Diagram

Ordering Information

DescriptionAleddra’s Generation 2 (G2) Emergency T8 sets the new industry standard as the first emergency T8 tube that is operable with the wall switch. With two single-end wired sockets, one endcap of the G2 emergency T8 is connected to the emergency power line and another to the wall switch, thus making it easy to turn on and off the T8 through the wall switch. During power outage, the emergency T8 automatically draws power from its built-in battery and lasts more than 90 minutes on battery at 420 lm. With its price point, the G2 emergency T8 is the most cost-effective emergency lighting option for replacing the expensive emergency ballast. Please follow the installation instruction to wire the G2 emergency T8.

▪ 2-in-1 tube: regular T8 lighting and emergency lighting▪ Built-in lithium batteries ▪ Controllable by wall switch▪ Easy battery shutoff switch for a long stocking time▪ Can be used as a regular LED T8▪ Easy to install and cost-effective▪ Patented▪ 5-year warranty

Product Compliance & Certifications: ▪ DLC Listed▪ 90 minutes battery time per industry standard▪ IES Progress Report 2019 Selection

Color 3000K-6000K

Wattage 15 W

Length 4ft

CRI >80

Input Voltage AC100-277V

Light Output 1800 lm

LED Type SMD2835

Power Factor >0.92

Luminous Efficiency >120 lm/W

Emergency Time 90 minutes

Light Output on Battery 420 lm at 3.5W

Battery OperatingTemperature 68°F ~ 104°F

4-ft

(other color made to order)

Specifications

Endcap witha red stripe Lamp

holder 2

Breaker 1

Green LED

Battery connection

switch

Milky Endcap

Wall switch

EM G2 T8Lamp

holder 1

Breaker2

Rev: 4/21/2020

Warranty 5-year

Rated Hours 50,000 hours

G3 Emergency LED T8 Tube

Features

Product Model # Wattage Color length LLT-4-EM-T8-G3-15W-30K 15W 3000K 4ftLLT-4-EM-T8-G3-15W-35K 15W 3500K 4ftLLT-4-EM-T8-G3-15W-40K 15W 4000K 4ftLLT-4-EM-T8-G3-15W-50K 15W 5000K 4ft


Wiring DiagramOrdering Information

Description

Aleddra’s G3 Emergency LED T8 Tube is a 2-in-1 tube that can be used as a regular T8 lamp and automatically draws power from its built-in batteryand lasts more than 90 minutes on battery at 420lm. It is double-end wired on line voltage (ballast bypass). It comes with dual safety switches on both end caps, which had been documented by a federal agency to be the most effective means of electric shock protection for an LED T8 tube. It is a cost-effective optionfor many facilities such as office buildings, schools, hotels, multifamily apartments, hallways, corridors, and stairs. It required to operate on an always-on circuit in order to keep the battery charged at all time.

Specifications

▪ 2-in-1 tube: regular T8 tube with backup battery▪ Built-in lithium batteries ▪ Easy battery shutoff switch for a long stocking time▪ Anti-electric shock safety switches - patented▪ Easy to install and cost-effective▪ 5-year warranty

Product Compliance & Certifications: ▪ ETL▪ DLC▪ 90 minutes battery time per industry standard

Wattage 15W

Length 4ft

CRI >80


Light Output 1890lm

LED Type SMD2835

Power Factor >0.92

Luminous Efficiency >120lm/W

Battery Backup Time 90 minutes

Light Output When on Battery 420 lm at 3.5W

Warranty 5-year

4-ft

Rev: 10/15/2019

4000K, 5000KColor Temperature 3000K, 3500K,

Rated Hours 50,000 hours

Integrated T8 Battery Backup

Features

Product Model # Wattage Color length YSH-T806-Y01-09(integrated)4000K 9W 4000K 2ftYSH-T806-Y01-09(integrated)5000K 9W 5000K 2ftYSH-T812-Y01-18(integrated)4000K 18W 4000K 4ftYSH-T812-Y01-18(integrated)5000K 18W 5000K 4ft



Description

The Integrated T8 Battery Backup fixture (BB T8N) comes with an integrated battery. It can be used as a regular T8 fixture. During power outage, the battery will provide backup power for the fixture for more than 90 minutes. It has a test button for checking the light output on battery, as well as another indicator showing the battery charging status. It has over-charging and over-discharging protection for ensuring 800 battery recharging cycles. This integrated T8 battery backup fixture is a cost-effective option for providing battery powered lighting during a power outage. It is suitable for many facilities such as office buildings, schools, hotels, multifamily apartments, hallways, corridors, and stairs. It required to operate on an always-on circuit in order to keep the battery charged at all time.

Specifications

▪ Integrated T8 fixture with backup battery▪ Built-in lithium batteries ▪ Test button and battery charging status indicator▪ Easy to install and cost-effective▪ 5-year warranty

Product Compliance & Certifications: ▪ ETL

Color 4000K, 5000K

Wattage 9W, 18W

Length 2ft, 4ft

CRI >80


Light Output 2ft: 1080lm, 4ft:2160lm

LED Type SMD2835

Power Factor >0.92

Luminous Efficiency >120lm/W

Battery Backup Time 90 minutes

Beam Angle 120°

Light Output When on Battery 3W, 427.9lm

Warranty 5-year

2-ft, 4-ft

Rev: 6/3/2019

Test button & indicators

8-ft LED T8 Tube

Features▪ Ballast bypass (Type B)

▪ Double-end wired on line voltage

▪ Plastic lens & aluminum heatsink (shatter-free)

▪ Universal driver 110V-277V

▪ Clear and frosted lens

▪ All popular 8-ft bases available (FA8, R17D, G13)

▪ Efficacy: 130 lm/w

▪ CRI: >80

Product Compliance & Certifications: ▪ ETL

Description

Specifications

Base FA8, R17D, G13

Color 30K, 35K, 40K, 50K, 60K

CRI >80

Input Voltage 110V-277V

Operating Temp. -20ºF-122ºF

Power Factor >0.95

Lumen Output 5200lm

Rated Life up to 50,000 hours

Warranty 5-year warranty

The 8-ft LED T8 Tube from Aleddra saves the end user the difficulty of converting 8-ft to 4-ft fixtures. It can use the existing fixture and socket directly on line-voltage without replacing the sockets.

The 8-ft LED Tube can save up to 60% energy consumption and minimize the installation costs. It is an ideal option for the 8-ft T8/T12 retrofit.

Ordering InformationProduct #

AL-T8-40P8FT-FA8-30KAL-T8-40P8FT-FA8-35KAL-T8-40P8FT-FA8-40KAL-T8-40P8FT-FA8-50KAL-T8-40P8FT-FA8-60KAL-T8-40P8FT-R17D-30KAL-T8-40P8FT-R17D-35KAL-T8-40P8FT-R17D-40KAL-T8-40P8FT-R17D-50KAL-T8-40P8FT-R17D-60KAL-T8-40P8FT-R17D (G13) 30KAL-T8-40P8FT-R17D (G13) 35KAL-T8-40P8FT-R17D (G13) 40KAL-T8-40P8FT-R17D (G13) 50KAL-T8-40P8FT-R17D (G13) 60K

Length

8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft


Base

FA8FA8FA8FA8FA8R17DR17DR17DR17DR17DG13G13G13G13G13

Wattage

40W40W40W40W40W40W40W40W40W40W40W40W40W40W40W

Color

3000K3500K4000K5000K6000K3000K3500K4000K5000K6000K3000K3500K4000K5000K6000K

Wiring without Ballast Diagram

FA8

R17D

G13

Rev: 4/19/2019

G5 SureFit® U-bend LED Tube 2’

Features▪ UL OOLV certified for plug and play, and UL IFAR certified for direct wire▪ Fits all standard 2'x2' U-bend troffers and sockets▪ Works with Instant Start and Rapid Start ballasts, as well as AC-in line voltage from 110V-277V▪ Double-end wired and does not require the change of the sockets within the fixture, as it supports both shunted and non-shunted tombstones (sockets)▪ Field-replaceable internal driver

Product Compliance & Certifications: ▪ DLC 4.2 qualified▪ UL Type A/Type B listed (OOLV #E479597)▪ UL Type B classified (IFAR #E325073)

Description

Specifications

Lens Type clear, diffused

Efficacy clear lens ≥ 120 LPW diffused lens ≥ 100 LPW

Color 27K, 30K, 35K, 40K, 50K

CRI > 80



Power 15W

Light Output clear @ 1800lm diffused @ 1500lm

Beam Angle 160º

Ballast Instant Start, Rapid Start



Aleddra’s SureFit® T8 U-bend tube is a smart choice for retrofitting existing fluorescent U-bend T8’s with an energy efficient replace-ment without taking the costly alternative of complete fixture upgrades.

Aleddra’s 2-ft U-bend T8 tube has a 6” separation between the two legs and will fit all standard 2’x2’ U-bend troffers and sockets.

The U-bend tube is double-end wired and does not require the change of the sockets within the fixture, as it supports both shunted and non-shunted tombstones (sockets). It works with Instant Start and Rapid Start ballasts, as well as AC-in line voltage from 110V-277V.

Using a BallastThe SureFit® U-bend tube can directly replace the existing fluorescent U-bend without rewiring.

Using Line VoltageThe installation process is simple and straightforward.

▪ Bypass the ballast

▪ Connect line voltage directly to the stockets (hot on one end and neutral on the other)

▪ Insert the U-bend tubeOrdering InformationProduct #

LLT-2U-T8-15W-BA-C-27KLLT-2U-T8-15W-BA-C-30KLLT-2U-T8-15W-BA-C-35KLLT-2U-T8-15W-BA-C-40KLLT-2U-T8-15W-BA-C-50KLLT-2U-T8-15W-BA-D-27KLLT-2U-T8-15W-BA-D-30KLLT-2U-T8-15W-BA-D-35KLLT-2U-T8-15W-BA-D-40KLLT-2U-T8-15W-BA-D-50K

Lens

ClearClearClearClearClearDiffusedDiffusedDiffusedDiffusedDiffused

Color Temp.

2700K3000K3500K4000K5000K2700K3000K3500K4000K5000K

Photos


T8/T12 Conversion Kit 8-ft Linear Strip Fixture Conversion

Features

▪ Low maintenance cost

▪ Suitable for all G13 T8 bi-pin LED tube (double-end

LED tube is strongly recommended for safety reasons)

▪ Pre-wired conversion kit bracket for easy installation

▪ Nice white-paint glossy finish for professional look

▪ Pre-drilled holes for 8-4I to 2-2I conversion and ballast

cover installation

Product Compliance & Certifications:

▪ UL Certified

Description

Aleddra’s T8/T12 conversion kit is designed for an

8-ft linear fluorescent tube retrofit. Aleddra is well

known for its EasiRetroFit® double-end LED tube

among lighting professionals. The LED tube and

the conversion kit will give you energy efficiency

and low costs for all your lighting retrofit projects.

Details


Each kit includes:

G13 T8 bi-pin sockets (tombstones)

Available Kits(8-4I) Conversion Kit8-ft lamps to four 4-ft lamps

(2-2I) Conversion Kit8-ft lamp to four 4-ft lamps

8-4I conversion kit can be reconfigured in the field to 2-2I kit, saving the end user the trouble of having exact counts on both fixtures.


Product #

Kit-T8-8-4IKit-T8-8-2I

Description

Two 8-ft to four 4-ft lamp conversion kitOne 8-ft to two 4-ft lamp conversion kit

T5 LED Integrated Lamp

Features

Product Model # Wattage Color Lumen Length Dimmable LLT-T5N-2-35K 9W 3500K 1035lm 2ft NoLLT-T5N-2-40K 9W 4000K 1035lm 2ft NoLLT-T5N-2-50K 9W 5000K 1035lm 2ft NoLLT-T5N-3-35K 12W 3500K 1380lm 3ft NoLLT-T5N-3-40K 12W 4000K 1380lm 3ft NoLLT-T5N-3-50K 12W 5000K 1380lm 3ft NoLLT-T5N-4-35K 16W 3500K 1840lm 4ft NoLLT-T5N-4-40K 16W 4000K 1840lm 4ft NoLLT-T5N-4-50K 16W 5000K 1840lm 4ft NoLLT-T5N-1-D-35K 5W 3500K 575lm 1ft YesLLT-T5N-1-D-40K 5W 4000K 575lm 1ft YesLLT-T5N-1-D-50K 5W 5000K 575lm 1ft YesLLT-T5N-2-D-35K 9W 3500K 1035lm 2ft YesLLT-T5N-2-D-40K 9W 4000K 1035lm 2ft YesLLT-T5N-2-D-50K 9W 5000K 1035lm 2ft YesLLT-T5N-3-D-35K 12W 3500K 1380lm 3ft YesLLT-T5N-3-D-40K 12W 4000K 1380lm 3ft YesLLT-T5N-3-D-50K 12W 5000K 1380lm 3ft YesLLT-T5N-4-D-35K 16W 3500K 1840lm 4ft YesLLT-T5N-4-D-40K 16W 4000K 1840lm 4ft YesLLT-T5N-4-D-50K 16W 5000K 1840lm 4ft Yes


Ordering InformationDescriptionAleddra’s new T5 LED Integrated (T5N) Lamps are designed to perform efficiently in conditions where fluorescent, halogen and low voltage luminaires have traditionally been used. Our lamps incorporate integral drivers, are self-supporting, and can be surface-mounted. Individual units can be chained together, making a desirable illumination space. Instant start within one second once power on. T5N Lamps connect directly to line voltage and can be used in any interior space. Ideal for under-cabinets in kitchens, offices, schools, hospitals, grocery stores and more.

▪ Operates directly from line voltage▪ Usable as a stand alone fixture▪ Individual units can be plugged together for continuous lengths up to 30ft▪ Suitable for damp locations▪ Good heat dissipation▪ Rated lifetime of 50,000 hrs▪ DLC Listed for utility rebate▪ Dimmable models support only 120V TRIAC dimmer▪ Installation Kit included:

Input Voltage

Base G5

CRI >80

LED Type LM80 2835

Lens Type Frosted

Power Factor >0.9

Color Temp. 3500K, 4000K, 5000K

Beam Angle 140°

Light Efficacy 120 LM/W

Operating Temp. -4°F ~ +104°F

Warranty 5-year

Dimmable/Non-dimmable

Specifications

Plastic Anchor 2pcs

Clip

Self-tapping Screw 2 pcs

T5-EC 12” T5 Power Connector

Product Compliance & Certifications: ▪ ETL▪ DLC

DimensionsL : 1ft - 11.8”, 2ft - 22.4”, 3ft - 34.2”, 4ft - 47.1”

W

H

Dimmable models: 120V only (TRIAC Dimmer)Non-dimmable models: 110-277V

Rev: 11/1/2019

INT-M2M INT-PC INT-PC-SWITCH

Available accessories to order separately:

Magnetic Holder

Type B T5 (Ballast Bypass)

Features

▪ T5 glass tube

▪ Same look and feel of fluorescent T5

▪ No ballast or external driver required

▪ Double-end wired to AC line voltage

▪ Suitable for existing fluorescent fixture retrofit

applications

▪ Uses half the energy as fluorescent T5 tubes with

up to 70% reduction of overall operating costs

▪ Shatter-proof PET coating included

Product Compliance & Certifications: ▪ UL▪ DLC

Description

Specifications

Socket Type G5 (standard T5 lamp socket)

Efficacy 128 LM/W

Color 4000K, 5000K

CRI > 80

Wattage 25W

Input Voltage 120-277V


Light Output 3000lm - 3200lm

Power Factor >0.9

Rated Life 50,000 hours

Warranty 5-years

Aleddra’s new Type B T5 is a bal last bypass

tube that is containing standard T5 lamp

socket. Compare to tradit ional l inear T5

f luorescent lamps, our tube lasts longer and

has great energy savings. It has a very wide

l ighting angle. It is an ideal energy saving

choice for existing l inear f luorescent fixtures.


Product #

T05B01-BD-40HT05B01-BD-50H

Lumen

3000lm3200lm

Color

4000K5000K


Dimensions

Rev: 12/3/2019

A

B

A: 45” B: 0.66”

PLL LED Lamp - Ballast Bypass

Features

▪ Ballast bypass (Type B)

▪ Target Replacement Lamps: FT40W/2G11

▪ Efficacy: 125 lm/w

▪ Energy efficient

▪ Cost-effective

▪ 5-year warranty


▪ UL certified

DescriptionSpecifications

Base 2G11

Color 30K, 35K, 40K, 50K

Wattage 17W

Efficacy 125lm/w

Length 22”



Power Factor 0.9

Dimmable Non-dimmable

Light Output 30K/35K: 2100lm 40K/50K: 2200lm



Aleddra’s PLL LED lamp is designed for replacing 2-ft 40W PLL lamp (2G11 base) that is used pre-dominantly with 2x2 troffer fixtures. This retrofit lamp avoids the costly fixture upgrade, saves 57.5% on lighting energy consumption from the start, and removes ballast maintenance costs once and for all for the end user. The PLL lamp is UL certified and comes with 5-year warranty.


APLL-23W-2800-BP-30KAPLL-23W-2800-BP-35K APLL-23W-2800-BP-40K APLL-23W-2800-BP-50K

Length

22”22”22”22”


Base

2G112G112G112G11

Color

3000K3500K4000K5000K

Lumen

2100210022002200

Wattage

17W17W17W17W

LED Cooler Tube External Driver | 4-ft 5-ft 6-ft

Features

▪ Qualifies for Utility Rebates

▪ IP65 rating for moisture proof

▪ LED alternative for refrigerator lighting

▪ External driver included

▪ National groceries, supermarkets, and

convenience stores are the perfect target audience

for the Cooler Tube

Product Compliance & Certifications: ▪ cULus▪ DLC

Specifications

Lens Type clear

Driver Type external driver

Input Voltage 100V-277VAC (50-60Hz)

Output Voltage 36V DC

Efficacy > 95 LPW (clear lens)

Color 30K, 35K, 40K, 45K, 50K

CRI > 80


Power Factor > .90

Beam Angle 170º

Warranty 5-year

Description

A l e d d r a , w i t h i t s s t ro n g i n d u s t r y re p u t a t i o n

w i t h t h e E a s i R e t ro fi t ® L E D t u b e f o r T 1 2 / T 8

re p l a c e m e n t s , i s n o w o f fe r i n g a n L E D

a l t e r n a t i v e f o r re f r i g e r a to r l i g h t i n g .

T h e C o o l e r Tu b e i s d e s i g n e d w i t h a 1 7 0

d e g re e b e a m a n g l e , m e e t i n g t h e n e e d s o f

m e rc h a n d i s e l i g h t i n g o n b o t h s i d e s o f t h e

L E D l i g h t , w h i l e m a i n t a i n i n g a h i g h e f fi c a c y

a t 9 5 l m / w a n d a p o w e r f a c to r 0 . 9 0 .

N a t i o n a l g ro c e r i e s , s u p e r m a r ke t s , a n d

c o n v e n i e n c e s to re s a re t h e p e r fe c t t a rg e t

c u s to m e r s f o r t h e C o o l e r Tu b e . I t i s u s e d i n

c o o l e r s a n d re f r i g e r a to r s .


LLT-4-FR-C-22W-35KLLT-4-FR-C-22W-40KLLT-4-FR-C-22W-50KLLT-5-FR-C-22W-35KLLT-5-FR-C-22W-40KLLT-5-FR-C-22W-50KLLT-6-FR-C-30W-35KLLT-6-FR-C-30W-40KLLT-6-FR-C-30W-50K

Length

4-ft4-ft4-ft4-ft5-ft5-ft6-ft6-ft6-ft

Lens

ClearClearClearClearClearClearClearClearClear

Color

3500K4000K5000K3500K4000K5000K3500K4000K5000K


LED E26 Screw-In Bulb E26 Base

Features

▪ Dimmable▪ Same look-and-feel of an incandescent bulb ▪ Driver-less technology▪ Rated for enclosed fixtures▪ Energy efficient▪ Cost-effective▪ 2-year warranty

Product Compliance & Certifications: ▪ UL

Specifications

DescriptionBulb Type LED A19

Base E26

Color 2700K, 3000K, 3500K, 4000K, 5000K

CRI >80

Beam Angle 360º

Input Voltage AC120V

Wattage 8W

Lumen 8W @ 800lm


Rated Life 15,000 hoursWarranty 2 year warranty

The first full-glass dimmable LED A19 bulb in the US market. The Omni A19 LED screw-in bulb looks exactly l ike an incandescent bulb, without the risk of theft! The Omni A19 radiates a 360 beam, leaving no shadow or dark zone near the base of the bulb. The Omni A19 8W LED screw-in bulb is the most cost-effective replacement to a 60W incandescent bulb. No coupons or rebates needed! Start your savings NOW!

Ordering InformationProduct Model Wattage Color Replacing

AAL-7.7WA19-E26-27K 8W 3000K 60WAAL-7.7WA19-E26-40K 8W 4000K 60W

*Other colors are available made-to-order

Dimensions

A19 2.36” in diameter, 4.25” in height

The traditional A19 LED lamp has a hard cutoff of light at the dark base zone. The Aleddra A19 bulb doesn’t have a dark zone at the base and puts out light beyond the base.


Rev: 3/21/2019

CF-LED® Lamp E26, GX23-2, G24Q, GU24, G24D-3 bases

Features▪ 50% energy saving and 75% maintenance reduction▪ Cost-effective▪ Rated for enclosed fixture▪ GX23-2 & G24Q bases are dual-mode: ballast-compatible and line voltage friendly ▪ E26 & GU24 bases are line voltage friendly ▪ Can be installed horizontally or vertically with the same beam spread as traditional lamps▪ 5-year warranty / Rated 50,000 hours lifetime

Product Compliance & Certifications: ▪ UL and cUL Type A/Type B listed (OOLV/OOLV7.E479597)▪ UL and cUL classified (IFAR/IFAR7.E325073)

Specifications

Efficacy 120 LPW

Socket Type E26, GU24, G24D-3 (diagonal 2-pin), GX23-2 (2-pin), G24Q (4-pin)

Color 2700K, 3000K, 3500K, 4000K, 5000K

CRI > 80



Wattage 6W, 11W

Beam Angle 360º

Description

Aleddra’s LED PL Replacement Lamp offers the first 360-degree LED

PL lamp with 100 lm/w efficacy. Unlike other LED PL lamps on the

market today, this revolutionary lamp can be installed either vertically

or horizontally with the same beam spread as traditional lamps.

Size: 6W: 1 3/8”W x 1 3/8”L x 4.5”H (top to socket edge, not including the in-socket length)

11W: 1 3/8”W x 1 3/8”L x 6.1”H (top to socket edge, not including the in-socket length)

Ordering Information (G24D-3/GX23-2/G24Q)

Model #

APL-6-D-GX23-2-27K (G24D-3) APL-6-D-GX23-2-30K (G24D-3) APL-6-D-GX23-2-35K (G24D-3) APL-6-D-GX23-2-40K (G24D-3) APL-6-D-GX23-2-50K (G24D-3) APL-6-D-GX23-2-27KAPL-6-D-GX23-2-30KAPL-6-D-GX23-2-35KAPL-6-D-GX23-2-40KAPL-6-D-GX23-2-50KAPL-11-D-GX23-2-27KAPL-11-D-GX23-2-30KAPL-11-D-GX23-2-35KAPL-11-D-GX23-2-40KAPL-11-D-GX23-2-50KAPL-6-D-G24Q-27KAPL-6-D-G24Q-30KAPL-6-D-G24Q-35KAPL-6-D-G24Q-40KAPL-6-D-G24Q-50KAPL-11-D-G24Q-27KAPL-11-D-G24Q-30KAPL-11-D-G24Q-35KAPL-11-D-G24Q-40KAPL-11-D-G24Q-50K

Socket

G24D-3G24D-3G24D-3G24D-3G24D-3GX23-2GX23-2GX23-2GX23-2GX23-2GX23-2GX23-2GX23-2GX23-2GX23-2G24QG24QG24QG24QG24QG24QG24QG24QG24QG24Q

Lumen

750lm750lm750lm750lm750lm790lm790lm790lm790lm790lm1240lm1240lm1240lm1240lm1240lm790lm790lm790lm790lm790lm1240lm1240lm1240lm1240lm1240lm

Replace CFL Wattage

13W13W13W13W13W13W13W13W13W13W26W26W26W26W26W13W13W13W13W13W26W26W26W26W26W

Wattage

6W6W6W6W6W6W6W6W6W6W11W11W11W11W11W6W6W6W6W6W11W11W11W11W11W

Color

2700K3000K3500K4000K5000K2700K3000K3500K4000K5000K2700K3000K3500K4000K5000K2700K3000K3500K4000K5000K2700K3000K3500K4000K5000K

Ordering Information (E26/GU24)

Model #

APL-6-A-E26-27KAPL-6-A-E26-30KAPL-6-A-E26-35KAPL-6-A-E26-40KAPL-6-A-E26-50KAPL-11-A-E26-27KAPL-11-A-E26-30KAPL-11-A-E26-35KAPL-11-A-E26-40KAPL-11-A-E26-50KAPL-6-A-GU24-27KAPL-6-A-GU24-30KAPL-6-A-GU24-35KAPL-6-A-GU24-40KAPL-6-A-GU24-50KAPL-11-A-GU24-27KAPL-11-A-GU24-30KAPL-11-A-GU24-35KAPL-11-A-GU24-40KAPL-11-A-GU24-50K

Socket

E26E26E26E26E26E26E26E26E26E26GU24GU24GU24GU24GU24GU24GU24GU24GU24GU24

Lumen

790lm790lm790lm790lm790lm1240lm1240lm1240lm1240lm1240lm790lm790lm790lm790lm790lm1240lm1240lm1240lm1240lm1240lm

Replace CFL Wattage

13W13W13W13W13W26W26W26W26W26W13W13W13W13W13W26W26W26W26W26W

Wattage

6W6W6W6W6W11W11W11W11W11W6W6W6W6W6W11W11W11W11W11W

Color

2700K3000K3500K4000K5000K2700K3000K3500K4000K5000K2700K3000K3500K4000K5000K2700K3000K3500K4000K5000K


SureFit® PL Convertible (PLC) Lamp

Features

▪ 50% energy saving and 75% maintenance reduction▪ Cost-effective▪ Rated for enclosed fixture▪ Adjustable beam angle up to 90 degree▪ Extensible arm for adjusting lamp position in the fixture▪ Ballast-compatible and line voltage friendly ▪ Can be installed horizontally or vertically with the same beam spread as traditional lamps▪ Rated 50,000 hours lifetime

Product Compliance & Certifications: ▪ UL and cUL Type A/Type B listed (OOLV/OOLV7.E479597)▪ UL and cUL classified (IFAR/IFAR7.E325073)▪ IES Progress Report 2019 Selection

Specifications

Wattage 6W, 9W

Socket Type G24Q (4-pin), GX23-2

Color 3000K, 4000K, 5000K

CRI > 80


Light Output 6W: 700lm, 9W: 1000lm


Size (D x H) 6W: 2.55”x5.5” 9W: 2.55”x5.5”

Warranty 5-year / 50,000 hours

Description

Aleddra’s new SureFit® PLC lamps are long-lasting and energy efficient replacements for PL lamps with 4-pin G24Q and GX23-2 bases without any fixture re-wiring. Unlike other LED PL lamps on the market today, this revolutionary lamp can be installed either vertically or horizontally. With the adjustable 90º angle and adjustable arm, it provides easy adjustment for different lighting direction and allows you to set the location of the top light. Great for general purpose and task lighting for residential or commercial applications.


APLC18-D-6-830-G24QAPLC18-D-6-840-G24Q APLC18-D-6-850-G24Q APLC18-D-6-830-GX23-2APLC18-D-6-840-GX23-2APLC18-D-6-850-GX23-2APLC26-D-9-830-G24Q APLC26-D-9-840-G24Q APLC26-D-9-850-G24QAPLC26-D-9-830-GX23-2APLC26-D-9-840-GX23-2 APLC26-D-9-850-GX23-2

Socket

G24QG24QG24Q

GX23-2GX23-2GX23-2G24QG24QG24Q

GX23-2GX23-2GX23-2

Lumen

700lm700lm700lm700lm700lm700lm

1000lm1000lm1000lm1000lm1000lm1000lm

Replace PL

Wattage

18W18W18W18W18W18W26W26W26W26W26W26W

Wattage

6W6W6W6W6W6W9W9W9W9W9W9W

Color

3000K4000K5000K3000K4000K5000K3000K4000K5000K3000K4000K5000K

aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.comRev: 8/14/2019

CF-LED® U-Lamp

Features

▪ AC friendly (ballast must be bypassed)▪ Compact design and half the weight of LED Corn Light▪ Up to 80% energy savings!▪ Cost-effective HID/MH replacement▪ Mounting style: Base-up (BU), Horizontal or Base-Down (BD)▪ 22W & 30W may be used with enclosed fixture with sufficient housing space▪ 50W & 80W not recommended for enclosed fixture▪ For indoor open fixtures only

Product Compliance & Certifications: ▪ cULus Listed▪ DLC 4.0 (E39 base)▪ LDL (E26 base)

Specifications

Description

Aleddra’s CF-LED® U-Lamp (Corn Light Replacement) is the most cost-effective retrofit option for HID lamp with up to 80% energy savings. Compared to LED Corn Light, it is superior in two aspects: half of the weight and smaller in size, which makes it a preferred option for enclosed HID fixtures.

This lamp operates with 110 to 277V AC line voltage without any ballast. Available in E26 and E39 (mogul base) base.

L70 > 50,000 hours.

Efficacy >95 LPW

Socket Type E26, E39, G24Q (22W only)

Color 3000K, 4000K, 5000K

CRI > 80 (>90 optional)

Input Voltage 110V-277V (bypassing ballast)


Wattage 22W, 30W, 50W, 80W

Beam Angle 360º




ALJ12-22U-830-G24QALJ12-22U-840-G24QALJ12-22U-850-G24QALJ16-22U-830-E26ALJ16-22U-840-E26ALJ16-22U-850-E26ALJ16-30U-830-E26ALJ16-30U-840-E26ALJ16-30U-850-E26

Color

3000K4000K5000K3000K4000K5000K3000K4000K5000K

Wattage

22W22W22W22W22W22W30W30W30W

Replace HID Wattage

65W65W65W65W65W65W100W100W100W

Lumen

2100lm2100lm2100lm2100lm2100lm2100lm3400lm3400lm3400lm


ALJ16-50U-830-E26ALJ16-50U-840-E26ALJ16-50U-850-E26ALJ16-50U-830-E39ALJ16-50U-840-E39ALJ16-50U-850-E39ALJ16-80U-830-E39ALJ16-80U-840-E39ALJ16-80U-850-E39

Color

3000K4000K5000K3000K4000K5000K3000K4000K5000K

Wattage

50W50W50W50W50W50W80W80W80W

Replace HID Wattage

175W175W175W175W175W175W250W250W250W

Lumen

5000lm5000lm5000lm5000lm5000lm5000lm7500lm7500lm7500lm

Wattage Diameter Length22W 2.28” 7.48”30W 3.28” 9.56”50W 3.58” 9.84”80W 5” 11.61”


Rev: 1/8/2020

SureFit® LED Downlight

Features

▪ Stylish lens-less design

▪ Patent-pending nano-reflector for indirect lighting

▪ Uniform light distribution

▪ Free of hot-spot

▪ Rated for commercial installation

▪ Installation with or without a recess can

▪ 3-year warranty / 30,000 hours


▪ UL



Specifications

Size 5” / 7.5”

Input Voltage 110-277V

Wattage 9W, 12W

Color 30K and 40K

(other color made to order)

Light Output 700 - 950 lm

CRI > 80

Beam Angle 120º

Operating Temp. -4 ºF to 122 ºF

Warranty 3-year / 30,000 hours

Description

Aleddra’s SureFit® LED Downlight is a high performance and cost-effective option for commercial and residential ceiling lighting applications. This downlight comes with an E26 straight wire connection and mounting hardware, installation is quick and easy and does not require the help of a professional. With its superior efficacy and a longer life than compact fluorescents, it provides soft white light to create a comfortable and relaxing environment.

The downlight comes with two sets of springs. Spring A set is for installation with existing recess can, whereas Spring B set is for installation without recess can, i.e., directly to the ceiling.

Spring A Spring B* Supporting 120V TRIAC dimmer only.

Color

30K40K30K40K30K40K

Product Model #

AL-SELD31US2-830-9-E26-DAL-SELD31US2-840-9-E26-DAL-SELD31US2-830-12-E26-DAL-SELD31US2-840-12-E26-DAL-SELD31US2-830-12-E26AL-SELD31US2-840-12-E26

Wattage

9W9W

12W12W12W12W

700 lm730 lm910 lm950 lm910 lm950 lm

Dimensions

5” x 2.5”5” x 2.5”

7.5” x 2.9”7.5” x 2.9”7.5” x 2.9”7.5” x 2.9”

Dimmable*

YesYesYesYesNoNo

LightOutput

Rev: 10/9/2019

Disc Light Round LED Light Engine

Features

▪ Easy integration to new fixture construction▪ Application: Ceiling Light, Flush Mount Fixtures▪ Integral driver-on-board▪ Line-voltage dimmable▪ Title 24 compliant▪ 5 year warranty

Product Compliance & Certifications: ▪ UL CertifiedSpecifications

DescriptionColor 3000K, 4000K

CRI 80

Input Voltage 110V AC


Wattage 17W, 28W

Lumen 17W @ 1200lm

28W @ 2200lm

Dimming Yes


Warranty 5 year warranty

The Disc Light is a cost-effective, high-performance

retrofit option for ceiling lights , drum fixtures, and flush

mounted fixtures, without the need of replacing the

complete fixture. Its line-voltage dimmable, making

ideal replacement for dimmable incandescent light

or CFL light (bypass ballast).


AL-4RLE-90-30KAL-4RLE-90-40KAL-7RLE-90-30KAL-7RLE-90-40K

Dimension

4”4”7”7”

Wattage

17W17W28W28W

Max Lumens-Dimmable @CRI80 @3000K

1200lm1200lm2200lm2200lm

Color

3000K4000K3000K4000K

Dimensions

0.78”

0.76”

4.40”

3.5”

3.33”4.40”

7.40”

7.40”

3.5”

5.42”


LED Panel Light

Features

▪ Easy and quick to install▪ Suitable for retrofit and new construction▪ Suitable for use in damp locations▪ Suitable for standard T-Bar lay-in orsuspended mount applications▪ 0-10V Dimmable▪ Rated lifetime of 50,000 hours

Product Compliance & Certifications: ▪ UL▪ DLC Premium Listed

Specifications

Input Wattage 30W, 48W

Efficacy 125 LM/W

CRI >80

Color 3500K, 4000K, 5000K

Power Factor >0.9



Size 2’x2’, 2’x4’

Warranty 5-year/50,000 hours


AL-PL40D2235HAL-PL40D2240HAL-PL40D2250HAL-PL54D2435HAL-PL54D2440HAL-PL54D2450H

Wattage

30W30W30W48W48W48W

Lumen

3750lm3750lm3750lm6000lm6000lm6000lm

Size

2'x2'2'x2'2'x2'2'x4'2'x4'2'x4'

Description

Aleddra’s LED Panel L ight is an energy-effic ient and cost -ef fect ive rep lacement for t rad i t ional l inear f luorescents . I t ut i l izes edge l ight ing technology to enable ul t ra - th in and u l t ra - l ight fixtures wi th uni form l ight ing ef fect . I t is des igned for v isual comfor t and prov ides a p leas ing env i ronment whi le qual i fy ing for the h ighest c lass ificat ion of ut i l i ty rebates . Clean and e legant des igns make them ideal ly su i ted for a l l types of inter ior space inc lud ing offices , schools , hospi ta ls , e lder care fac i l i t ies and reta i l locat ions.

2x2, 2x4


Color

3500K4000K5000K3500K4000K5000K

UFO Highbay Fixture 100W, 150W, 200W, 300W, 400W, 500W

Features

▪ Saves up to 70% energy as compared to existing highbay fixtures▪ Stylish and modern design and a lower profile▪ Designed for indoor lowbay or highbay application▪ IP65 rated for dry, damp, and wet locations▪ Microwave motion sensor optional▪ Daylight sensor optional▪ Yoke mount bracket optional▪ Aluminum reflector optional▪ Polycarbonate reflector optional

Product Compliance & Certifications: ▪ UL▪ DLC 4.2


AHB-10W11A1BUP-5000KAAHB-15W12A1BUP-5000KAAHB-20W19A1BUS-5000KAHB-30W26A1BUP-5000KAHB-40WA2B-5000KAHB-50WA2B-5000KA

Wattage

100W150W200W300W400W500W

Lumen

144002100025700402004950064800


Description

Aleddra’s UFO luminai re features a sty l ish des ign and a lower profile . I t is des igned for any indoor lowbay or highbay appl icat ions. I t saves up to 70% energy as compared to the ex ist ing h ighbay fixtures .

The defaul t co lor is 5000K and other co lors are opt ional . I t can a lso accommodate the customer ’s need for specia l beam angles : 30 , 60 , 90 , or 120 degrees.

Specifications

Driver Meanwell driver

Efficacy >130 LPW

Wattage 100/150/200/300/400W

Color 5000K

CRI > 80 (90CRI optional)



Dimming 1-10V dimmable

IP Rating IP65

Beam Angle 120º


* 30K, 35K, 40K models made to order* 30, 60, 90, 150 degree beam angle made to order

UFO Emergency Battery Pack

Features

▪ Automatic Battery Testing: 30 seconds test

monthly and 90 minutes test annually

▪ Emergency Operation: 90 minutes

▪ Optimized for internal UFO fixture

▪ Constant power output on emergency mode

▪ One Piece Design with Metal Housing

▪ IP65 Rated

▪ 2-in-1 waterproof LED test switch and

indicator light included

▪ Simple wiring

▪ Battery testing remote control (optional)


▪ UL 924 Damp Location

▪ NFPA 101 (Life Safety Code)

▪ NFPA 70 (National Electrical Code)

Specifications

Description

Emergency Power 25W, 40W

Emergency Time 90 mintues

Battery Type Lithium or Ni-MH


Operating Temp. 41°F to 122°F

Power Factor 0.5

Aleddra’s UFO Emergency Battery Pack provides 25W/40W lumen output during emergency illumination for a minimum of 90 minutes. It is a cost-effective and energy-efficient option for various emergency lighting applications such as warehouses, manufacturing facilities, school gymnasiums, community centers, recreation centers, and department stores.


EMUFO-25170-TTEMUFO-40170-TT

Emergency Power


Model #

25W40W

Recommended for

100W and 150W UFO200W, 240W, 300W UFO

Safe Wire (steel) 1pcsHook 2pcs

Chain Link Connector 1pcsWire Endcap

Installation Kit: (included)

Rev: 1/3/2020

Flexible Conduit 13''

LED Linear Highbay 2ft, 4ft

Features

▪ Saves up to 70% energy as compared to existing

highbay fixtures

▪ Replaces HID metal halide and fluorescent

highbay light fixtures

▪ 1-10V dimming

▪ Motion sensor optional

▪ Battery backup optional

▪ Last up to 50,000 hours of continuous use

▪ Designed for large commercial spaces


▪ UL

▪ DLC Premium

Specifications

Sizes 2-ft, 4-ft

Wattage 165W, 225W

Efficacy >130 LPW

CRI > 80

Color 5000K by default

Beam Angle 120º

Input Voltage 277V, 480V

Operating Temp. -4ºF~113ºF



AL-LHB2P165W-50K-HA-AAAL-LHB2P225W-50K-HA-AAAL-LHB4P165W-50K-HA-AAAL-LHB4P225W-50K-HA-AAAL-LHB4P225W-50K-HV-HA-AA

Wattage

165W225W165W225W225W

Lumen

21450 lm29250lm21450 lm29250 lm29250 lm

Size

2-ft2-ft4-ft4-ft4-ft


Description

Aleddra’s LED L inear Highbay prov ides a qu ick and easy so lut ion for warehouse and industr ia l appl icat ions. Th is is the high-per formance , energy-effic ient and maintenance- f ree rep lacement for ex ist ing HID meta l ha l ide and f luorescent h igh bay l ight fixtures . Th is LED fixture he lps save on energy costs and i t is idea l for warehouses , reta i l spaces , gymnasiums and many more commercia l appl icat ions.

* Other colors are made to order

Input Voltage

277V277V277V277V480V

Chain Kit (included)

Pendant HangerSurface Mount

Accessories

Rev: 4/30/2019

Option A Option B Option C

Tri-proof Vapor Tight

▪ IP65 waterproof rated, dust, corrosion and

pressure-proof

▪ High Impact PC Housing (Ik08)

▪ No dark spots, uniform luminous surface

▪ Excellent heat dissipation

▪ Maximum efficacy and minimum glare

▪ Can be ceiling or suspension mounted

▪ Motion sensor (P/N MOTION_SENSOR_1) and emergency backup (optional)

▪ 5-year warranty


▪ ETL

▪ DLC Premium

Specifications

Wattage 25W, 40W

Size 2ft, 4-ft

Light Efficacy > 120lm/w

Color 5000K

Lens Cover Frosted

CRI > 80

Input Voltage 120-347VAC

Power Factor >0.95




Aleddra’s new Tri-proof Vapor Tight is the best quality enclosure. It is a perfect solution for indoor and outdoor applications; protects lamps from dust, dirt, and humidity. Its built-in aluminum heat sink provides cooling and improves safety. This commercial fixture can be ceiling or suspension mounted. It is IP65 waterproof rated. Optional features include the Motion Sensor and the Emergency Backup. These are highly versatile fixtures that look good while saving you money.


AVT-VT25W-50K (2-ft 50K)AVT-VT40W-50K (4-ft 50K)

Size

2-ft4-ft

Wattage

25W40W

Color

5000K5000K


Applications

Features

Description

*Other colors made to order

LightOutput

3000 lm4800 lm

LED Flood Light 40W, 70W

Features▪ Compact and light weight, wide range of wattage

▪ Higher wattage models can be used for sports

field lighting

▪ Samsung LED diodes

▪ Yoke mount bracket with easy lighting direction

adjustment

▪ IP65 for wet location


▪ ETL

▪ DLC


AL-FL220-W030-60-30KAL-FL220-W030-60-40KAL-FL220-W030-60-50KAL-FL280-W050-60-30KAL-FL280-W050-60-40KAL-FL280-W050-60-50KAL-FL330-W100-60-30KAL-FL330-W100-60-40KAL-FL330-W100-60-50KAL-FL390-W140-60-30KAL-FL390-W140-60-40KAL-FL390-W140-60-50KAL-FL390-W210-60-30KAL-FL390-W210-60-40KAL-FL390-W210-60-50KAL-FL675-W400-60-30KAL-FL675-W400-60-40KAL-FL675-W400-60-50KAL-FL675-W600-60-30KAL-FL675-W600-60-40KAL-FL675-W600-60-50K

Wattage

30W30W30W50W50W50W

100W100W100W140W140W140W210W210W210W400W400W400W600W600W600W

Lumen

26502900300043004550470087009500

10000128001370014000180001940020000432004500046000570005960061000

Weight

3.43.43.47.07.07.0

10.110.110.118.018.018.024.924.924.948.048.048.062.862.862.8


Description

Aleddra’s LED F lood L ight is des igned with versat i l i ty in mind. I t ’s compact and l ight weight . I t comes in a wide range of wattage , f rom 30W to 600W, for a l l types of outdoor l ight ing appl icat ions. The h igher wattage models can be used for spor ts fie ld l ight ing. I ts yoke mount bracket prov ides easy adjustment for d i f ferent l ight ing d i rect ion. When mount ing on the bui ld ing , i t can be used as a good wal lpack fixture . I t can a lso be used on the ground or as a wal l wash l ight . The defaul t beam angle is 60 degrees. We a lso of fer many other beam angles on a made-to-order basis .

Specifications

Driver Meanwell driver

Efficacy 85-95 LM/W

Color 30K, 40K, 50K

Wattage 30W to 600W

CRI > 70



Power Factor >0.90


400W: 28”H x 21”W 600W: 28”H x 27”W

LED DMD Flood Light 100W, 150W, 200W

Features▪ Compact and light weight, wide range of wattage

▪ Higher wattage models can be used for sports

field lighting

▪ Samsung LED diodes

▪ Yoke mount bracket with easy lighting direction

adjustment

▪ IP65 for wet location


▪ ETL

▪ DLC


AFL-10S-100W-A-L-P-5000KAFL-15S-150W-A-L-P-5000KAFL-20S-200W-A-L-P-5000K

Wattage

100W150W200W

Lumen

120001800024000


Description

Aleddra’s DMD Flood L ight is des igned with versat i l i ty in mind. I t ’s compact and l ight weight . I t comes in a wide range of wattage , f rom 100W to 200W, for a l l types of outdoor l ight ing appl icat ions. The h igher wattage models can be used for spor ts fie ld l ight ing. I ts yoke mount bracket prov ides easy adjustment for d i f ferent l ight ing d i rect ion. When mount ing on the bui ld ing , i t can be used as a good wal lpack fixture . I t can a lso be used on the ground or as a wal l wash l ight . The defaul t beam angle is 110 degrees.

Specifications

Efficacy > 120 LM/W

CRI > 80

Color

5000K

Wattage 100W, 150W, 200W

Beam Angle 110º



Size 10.83" x 12.22" x2.26" 17.7" x 13.7" x 2.34" 17.7" x 13.7" x 2.34"


Gen 4 Shoebox Fixture 50W, 75W, 100W, 150W, 200W, 300W

Features▪ Energy-efficient and cost-effective replacement for existing parking lot lighting luminaire▪ Stylish design yields less wind drag, protective cover on the back prevents bird from nesting▪ Light Distribution: Type III ▪ Surge protection▪ Photocell and motion senor optional ▪ 5-pin NEMA receptacle built-in▪ IP65 wet location


ASB-PLQ507-W050-P-B2-L1-Y(5000K)ASB-PLQ507-W075-P-B2-L1-Y(5000K)ASB-PLQ565-W100-P-B2-L2-Y(5000K)ASB-PLQ565-W150-P-B2-L2-Y(5000K)ASB-PLQ785-W200-P-B2-L2-Y(5000K)ASB-PLQ785-W300-P-B2-L2-Y(5000K)

Wattage

50W75W

100W150W200W300W

Light Output

6500 lm9000 lm

14000 lm21000 lm28000 lm42000 lm


Description

Specifications

Lens Type Type III

LED Chip Philips

Efficacy 140 lm/w

Wattage 50W - 300W

Color 5000K

CRI >70

Input Voltage 100V-277V, 480V optional

Power Factor >0.95


Dimming 1-10V

Rated Life > 54,000 hours

Material Aluminum alloy & PC optics lens


* Y is the mounting arm: A, B2, C2, D2, E2, F2* Optional: Photo Cell, Motion Senor

Aleddra’s 4th Generat ion Shoebox is an energy-effic ient and cost -ef fect ive rep lacement for ex ist ing park ing lot l ight ing luminai res . I t is ETL cer t ified and comes with IP65 rat ing. A ,B ,C ,D,E ,F type mount ing accessor ies for choice , su i tab le for mount ing on d i f ferent s ize round pole , square pole and wal l .

Dimensions

Product Compliance & Certifications: ▪ ETL▪ DLC Premium

A B2 C2

D2 E2 F2

For slipfitter For small size square pole

For small size round pole

For large size square pole

For large size round pole

For wall mounts

Rev: 11/15/2019

Semi-cutoff Wallpack

Features

▪ IP65 Rating

▪ No UV or IR in the beam

▪ Easy to install and operate

▪ Energy saving and long lifespan

▪ Instant start, NO flickering, NO humming

▪ Ideal for residential/commercial applications

▪ Photocell / Surge protector (Optional)


▪ UL

▪ DLC Premium

Specifications



Efficacy >115 LPW

CRI > 80

Power Factor >0.9

Color Temp. 5000K

Viewing Angle 110º


Warranty 5-year


AWP-SWP01-40AA1-50KAWP-SWP01-60AA1-50KAWP-SWP01-100AA1-50K

Wattage

40W60W

100W

Lumen

5000 lm7700 lm

13750 lm

Color

5000K5000K5000K


Description

Aleddra’s LED Semi-cutoff Wal lpack is a high-per formance , energy-effic ient and maintenance- f ree so lut ion for res ident ia l and commercia l appl icat ions. Th is LED wal lpack he lps save on energy costs and i t is idea l for a var iety of indoor/outdoor appl icat ions , inc lud ing entrances , pat ios , walkways , park ing lots , swimming pools , landscapes , publ ic p laces , reta i l and apar tment complexes. Th is LED wal lpack fixture can be mounted on sur face/facade , whether you have a new construct ion or upgrade appl icat ion.

Dimensions

Rev: 4/25/2019

Full-cutoff Wallpack

Features

▪ IP65 Rating








▪ UL

▪ DLC Premium

Specifications



Efficacy >115 LPW

CRI > 70

Power Factor >0.9

Color Temp. 5000K

Viewing Angle 155*95º


Warranty 5-year


AWP-FWP01-40CT4A1-50KAWP-FWP01-60CT4A1-50KAWP-FWP01-100CT4A1-50K

Wattage

40W60W

100W

Lumen

5200 lm7800 lm

13500 lm

Color

5000K5000K5000K


Description

Aleddra’s LED Ful l -cutoff Wal lpack is a high-per formance , energy-effic ient and maintenance- f ree so lut ion for res ident ia l and commercia l appl icat ions. Th is LED wal lpack he lps save on energy costs and i t is idea l for a var iety of indoor/outdoor appl icat ions , inc lud ing entrances , pat ios , walkways , park ing lots , swimming pools , landscapes , publ ic p laces , reta i l and apar tment complexes. Th is LED wal lpack fixture can be mounted on sur face/facade , whether you have a new construct ion or upgrade appl icat ion.

Dimensions

Rev: 4/25/2019

40W / 60W

100W

R-style Wallpack

Features

▪ IP65 Rating








▪ UL

▪ DLC Premium

Specifications


Wattage 40W, 80W

Efficacy >120 LPW

CRI > 70

Power Factor >0.9

Color Temp. 5000K

Viewing Angle 60º


Warranty 5-year


AWP-RWP02-40WCT1NA1-50KAWP-RWP02-80WCT1NA1-50K

Wattage

40W80W

Lumen

5200 lm10800 lm

Color

5000K5000K


Description

Aleddra’s LED R-sty le Wal lpack is a high-per formance , energy-effic ient and maintenance- f ree so lut ion for res ident ia l and commercia l appl icat ions. Th is LED wal lpack he lps save on energy costs and i t is idea l for a var iety of indoor/outdoor appl icat ions , inc lud ing entrances , pat ios , walkways , park ing lots , swimming pools , landscapes , publ ic p laces , reta i l and apar tment complexes. I t can be mounted on sur face/facade , whether you have a new construct ion or upgrade appl icat ion.

Dimensions

40W

40W80W

80W

Rev: 4/25/2019

LED Garden Light

Features

▪ Application: Pedestrian street, factory, schools,

garden, courtyard, hotel, parking lot, public park

▪ Lighter in weight

▪ Cost-effective

▪ Dimmable

▪ Samsung LED chips producing brighter lighting

▪ IP65 for wet locations

▪ Photocell optional

▪ 5-year warranty


▪ ETL

Specifications

Description

Color 5000K

CRI ≥70




Beam Angle 100*140º

Power Factor >0.93


The Garden Light is a cost-effective and high performance option for various applications such as pedestrian streets, factories, schools, gardens, and more. It has an elegant appearance, excellent struc-ture, and is lighter in weight. It is IP65 rated for wet locations.


AGL-260-W020-Y1-Z1 (3000K)AGL-260-W020-Y1-Z1 (4000K)AGL-260-W020-Y1-Z1 (5000K)AGL-260-W035-Y1-Zn(3000K)AGL-260-W035-Y1-Zn(4000K)AGL-260-W035-Y1-Zn(5000K)AGL-325-W50-Y1-Z1 (3000K)AGL-325-W50-Y1-Z1 (4000K)AGL-325-W50-Y1-Z1 (5000K)AGL-325-W100-Y1-Z1 (3000K)AGL-325-W100-Y1-Z1 (4000K)AGL-325-W100-Y1-Z1 (5000K)

Wattage Lumen

1980203020803270337034604470447047009950

1020010400

Color

3000K4000K5000K3000K4000K5000K3000K4000K5000K3000K4000K5000K


Dimensions

Beam Angle: 100*140º

Model #

20W20W20W35W35W35W50W50W50W

100W100W100W

Cobra Head LED Lamp for Parking/Street Light Retrofit

Features

▪ Stylish design with slim body for retrofit

▪ Force air circulation with fan

▪ Ideal retrofit option for Parking Lot and

Street Light fixtures

▪ Philips LED

▪ Type III distribution by default

▪ Direct wire (ballast bypass)

▪ Rated for enclosed fixtures only

▪ 5-year warranty


▪ UL, DLC 4.3

Specifications

Description

Color 5000K

CRI >70




Beam Angle 90*150º

Efficacy 120-130lm/w

Lamp Base E39

Power Factor >0.9


The Street Light Retrofit Lamp is a cost-effective and high performance replacement lamp for outdoor pole/arm-mounted area and roadway luminaires (Type B). It is an ideal retrofit option for metal halide lamp. It fits on many different fixtures to replace traditional lamps. It is rated for enclosed Cobra Head street light fixture.


ALC-CLH-54W1A2E 5000KALC-CLH-75W1A1E 5000KALC-CLH-95W1A1E 5000KALC-CLH-115W1A1E 5000K

Wattage Lumen

5600-5900 lm8300-9000 lm

11400-12300lm12500-13500lm


Model #

54W75W95W

115W

Dimensions

9.6*4.4*3.2”11.7*5.4*3.4”11.7*5.4*3.4”11.7*5.4*3.4”

Replace HID/MH Wattage

175W250W300W400W

180° Retrofit Lamp Application

* Type V lens made to order* Other color temperatures made to order

- 54W - 75W- 95W- 115W

Documents

aleddra · LED Panel Light UFO Highbay Fixture UFO Emergency Battery Pack AC friendly (ballast must be bypassed) Compact design and half the weight of LED Corn Light Up to 80% energy