Embed Size (px)
Citation preview
A.Levin, IHEP, Protvino, Russia April 27, 2010
2nd PANDA Russia Workshop2nd PANDA Russia Workshop
Status-report on the barrel mechanical design work.
A.LevinInstitute for High Energy Physics
Protvino, Russia
A.Levin, IHEP, Protvino, Russia April 27, 2010
Mechanical structureMechanical structure design status. design status.
1. Preliminary design for types 1, 6, 10 and 11 of the crystal module mechanical structure is done for the normal slice .
2. Preliminary design for individual mechanical parts of crystal modules (carbon fibre alveole, aluminium inserts and intermediate plates etc.) is done.
3. Drawings for the tooling (mould) to produce alveole prototype are done. Mould was made at the beginning of 2010.
A.Levin, IHEP, Protvino, Russia April 27, 2010
Crystal module designCrystal module design..
Individual slice with worked out modules.
Support module plate
Module type 1 Module type 6
Module type 11
Module type 10
A.Levin, IHEP, Protvino, Russia April 27, 2010
Crystal module designCrystal module design..
Module type 6. Assembled view.
Intermediate plate
Alveole insertCrystal with APD
Carbon alveole pack
Module type 6. Exploded view.
A.Levin, IHEP, Protvino, Russia April 27, 2010
Design for individual mechanical parts.Design for individual mechanical parts.
Module type 6.Module type 6. Intermediate plates.
A.Levin, IHEP, Protvino, Russia April 27, 2010
Design for individual mechanical parts.Design for individual mechanical parts.
Module type 6. Alveole insert.
A.Levin, IHEP, Protvino, Russia April 27, 2010
Design for individual mechanical parts.Design for individual mechanical parts.
Module type 6. Individual carbon alveole. Alveles pack.
A.Levin, IHEP, Protvino, Russia April 27, 2010
Crystal module designCrystal module design..
Module type 1. Assembled view. Module type 1. Exploded view.
Intermediate plate
Alveole insert
Crystal with APD
Carbon alveole pack
Finger with screw
A.Levin, IHEP, Protvino, Russia April 27, 2010
UrgentUrgent necessity.necessity.
Finger with screw
Support module plate
Intermediate plate
Alveole insert
Capsule frame
Area of APD and Asic chip ???
Scintillator crystal PWO
Carbon fiber alveoleModule type 1. Local cross section.
A.Levin, IHEP, Protvino, Russia April 27, 2010
Design for individual mechanical parts.Design for individual mechanical parts.
Module type 1.Module type 1. Intermediate plates.
A.Levin, IHEP, Protvino, Russia April 27, 2010
Design for individual mechanical parts.Design for individual mechanical parts.
Module type 1. Alveole inserts.
A.Levin, IHEP, Protvino, Russia April 27, 2010
Design for individual mechanical parts.Design for individual mechanical parts.
Module type 1. Individual carbon alveole. Alveles pack.
A.Levin, IHEP, Protvino, Russia April 27, 2010
Crystal module designCrystal module design..
Super module type 10/11. Assembled view.
Module type 10
Module type 11
A.Levin, IHEP, Protvino, Russia April 27, 2010
Crystal module designCrystal module design..
Super module type 10/11. Exploded view.
Intermediate plate
Alveole insert
Finger with screw
Crystal with APD
Carbon alveole pack. Type 11.
Carbon alveole pack. Type 10.
Crystal with APD
Alveole insert
A.Levin, IHEP, Protvino, Russia April 27, 2010
Design for individual mechanical parts.Design for individual mechanical parts.
Super module type 10/11.Super module type 10/11. Intermediate plates.
A.Levin, IHEP, Protvino, Russia April 27, 2010
Design for individual mechanical parts.Design for individual mechanical parts.
Super module type 10/11. Alveole inserts.
A.Levin, IHEP, Protvino, Russia April 27, 2010
Design for individual mechanical parts.Design for individual mechanical parts.
Module type 10. Individual carbon alveole. Alveles pack.
A.Levin, IHEP, Protvino, Russia April 27, 2010
Design for individual mechanical parts.Design for individual mechanical parts.
Module type 11. Individual carbon alveole. Alveles pack.
A.Levin, IHEP, Protvino, Russia April 27, 2010
Tool design.Tool design.
Mould for alveole prototype production.
Assembled view.
Side plate
Mandrel
Tightening screw
End plate
A.Levin, IHEP, Protvino, Russia April 27, 2010
NNearest plansearest plans
1. Final design for types 1, 6, 10 and 11 of crystal modules.2. Preliminary design for remaining types of crystal modules for the
normal slice .3. Production drawings for moulds to make types 1 and 11 of
alveoles.
