Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
alfer®
alu
min
ium
Building-material catalogue
Tile edgings
9704
2 | T
ile e
dgi
ngs
| 01
2017
2
ALO
ALCR
AGP
ALU
ALK
AGK
ALP
ALG
EDL
ALC
ALX
ALM
STA
GUS
SGC
FER
ABS
CU
EHO
EPDM
GUM
PS
PC
MES
PVC
POM
EVA
PU
PE
PET
TPE
PA
PP
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Colour coding system application
Angle profiles
Quarter circle profiles
Square edging profiles
Step edging profiles
Joint cover profiles
Expansion joint profiles
Balcony bracket
Tile edgingsExplanations
Colour guide materials
Aluminium casting, tumbling polished
Aluminium casting, powder-coated
alferceram®, ceramic powder-coated aluminium
Aluminium chrome-plated
Aluminium, vibratory finish
Aluminium, tumble polished
Brass-plated aluminium
alferoxal®, multicolour aluminium, anodized
Powder-coated aluminium
Uncoated aluminium
Anodized aluminium
Stainless steel
Hard ferrite
Cast iron
Injection moulded, chrome-plated
Steel or steel, galvanized
Brass, solid or brass, shiny solid
Copper, solid
Plastic, acrylonitrile butadiene styrene
Plastic, ethylene propylene diene rubber
Plastic, ethylene vinyl acetate
Rubber
Plastic, polyamide
Plastic, polycarbonate
Plastic, polyethylene
Plastic, polyethylene terephthalate
Plastic, polyoxymethylene
Plastic, polypropylene
Plastic, polystyrene
Plastic, polyurethane
Plastic, polyvinylchloride
Plastic, thermoplastic elastomers
Real wood
Explanations Brand NamesPackaging
loose: The item is not packed.shrink-wrapped: The loose item is shrink-wrapped in transparent PE foil.shrink-wrapped SS: The shrink-wrapped item comes with a SS Euro-per-foration allowing it to be suspended.SS bag: The item is packed in a transparent LDPE bag (Euro-perforation).SS polybag: The article comes in a PE tube.SS box: the item is packed in a transparent box with Euro-perforation.SS cardboard box: The item comes in a SS cardboard box.on roll: The item comes on a roll and can be cut to measure.sealed: The item is sealed with a transparent PE foil.foil-wrapped, one-sided: The item is covered on one side with a protective foil.rolled in a box: The item is packed rolled up in a box.clap-pac: The item comes in impact-resistant, transparent, PVC snapshut packaging (multi-perforation) and can be re-closed.Min. OU: The minimum order unit specifies both the minimum order quantity of an item and the order unit.e. g.: Min. OU = 5 pcs.: means that orders must either be for a minimum of 5 pieces of this item, or multiples thereof.PU: Packaging unit.
Important Note!The following trademarks (®, M. R.) are registered for the alfer® aluminium Gesellschaft mbH, D-79793 Wutoeschingen, (as of: 01. 09. 2013)
alfer® � �
alferoxal® B D F I L � A P �
alferceram® B D F I L � A P �
clipstech® � �
combitech® � � �
cabelino® � �
logika® �
ferroplatan® �
coaxis® � � �
x-star® � �
easyrack® �
The use of these rights is permitted only upon expressed authorization by alfer® aluminium Gesellschaft mbH, D-79793 Wutoeschingen.
In the heart of Europe
Nestled between the Upper Rhine and the Southern Black Forest is the Wutachtal Valley. Close to both Switzerland
and France, this has been home to many world leading aluminium specialists for decades. Today, it is Europe’s largest
connected economic area for the production and processing of aluminium. It is therefore unsurprising that the region is
also known as the ‘Aluminium Valley’. This is also the place where the alfer® success story began in 1973 in Wutöschin-
gen, Baden-Württemberg. Since then, alfer® has used this site to develop a whole range of aluminium profiles, primarily
for DIY enthusiasts and tradespeople, which set even international standards.
Tile edgings
6
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
Tile edgingsRange overview
The edge protection classic
alfer®-fix universal hole pattern
The angle profiles, which are available in a variety of material op-
tions, all feature the alfer®-fix universal hole pattern. Combining var-
ious hole shapes makes it possible to use the profiles universally.
The largest possible perforation enables optimal penetration of the
glue or mortar. This results in a perfect contact surface between tile
and substrate that guarantees maximum hold. The different perfo-
rations are exceptionally well suited for prefastening the profile to
the wall or floor. Our alfer®-fix universal hole pattern – simply clever!
Angle profiles
Angle profiles are the classic among edge protection profiles for tile
floor coverings. The decorative angle profiles from alfer® provide
effective protection from damage to tile edges while improving the
overall appearance. The process of installing tiles is also made easi-
er by using angle profiles. They enable accurate alignment of the tile
floor covering and guarantee exact edges and clean connections to
other floor coverings, plaster or wallpaper.
Effective protection, decorative look: Quarter circle profiles
Ceramic tiles are not only extremely popular in wet zones. Tile floor
coverings also impress in other living areas and appeal to their au-
dience with one-of-a-kind properties. They are safe from a hygienic
point of view, resistant to dirt, easy to clean and certainly also take
home the winning ticket when it comes to aesthetics. alfer® offers
attractive quarter circle profiles to ensure an overall impressive look
as well as protection of the exposed tile edges of external wall cor-
ners.
7
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
Tile edgingsRange overview
Accessories for clean corners
Using quarter circle external and internal angles allows users to
install tile floor coverings in a clean and visually pleasing manner
down to every nook and cranny. The quarter circle external and in-
ternal angles made from aluminium, plastic or stainless steel are
available for two or three quarter circle profiles that meet at right
angles. Practical advantage: It is not necessary to mitre the profiles.
Clean squared: Square edgings
Our durable square profiles feature an alfer®-fix universal hole pat-
tern. They put the perfect finish on external wall corners and protect
tile edges in the most beautiful way. Our tip: alfer® square tiles are a
real eye-catcher when installed as a border. The robust profiles can
even be installed on the floor thanks to their closed square design.
Accessories for clean corners
Our square tile corners made from anodized aluminum or stainless
steel make clean installation down to the smallest detail possible.
The square tile corners guarantee a perfect look when it comes to
either two or three square profiles meeting at right angles and leave
the viewer with a professional impression.
Practical installation tools: Tile accessories
Clean tile floor coverings do not happen by chance. There are a
number of useful tools that help you with your installation work.
Every step of the way and tile by tile, they ensure that you reach
your professional and perfect installation goal. You definitely need
spacer wedges and cross or T-shaped tile spacers. Go and get
started!
8
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
Tile edgingsRange overview
One step further
Step edging profiles and tile edging system for steps
Due to the constant up and down, stairs are exposed to more ex-
treme loads than any other floor covering area. Particularly step
edges require special protection against mechanical influences.
Aluminum, stainless steel, plastic or real wood design: alfer® has
the perfect solution for any taste and any requirement.
Discover our step edging profiles and tile edging systems for steps
and make your stairs safer and more beautiful in the blink of an eye!
For lasting protection: Joint cover profiles, expansion joint pro-
files and wet sealing profiles
Tile floor coverings can take a hit and they are there for the long run
as a permanent fixture. Proper installation is the key to achieving
this. There are a number of points to keep in mind, if you want to
enjoy your new tile floor covering for years to come, such as ex-
pansion forces, for example. These can cause significant damage
and can lead to damaged joints or even broken tiles. If these effects
impede the surface quality, water can penetrate the floor and cause
additional damage.
It does not have to come to that. alfer® joint cover and expansion
joint profiles protect your tile floor coverings reliably and for the long
term. alfer®’s easy-to-install wet sealing profiles are a clever, attrac-
tive and reliable solution for the problematic corners in wet zones.
Protect your tile floor covering. It is worth it!
9
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
Tile edgingsRange overview
For clean transitions
clipstech® system profiles
The edges of floor coverings can fray or crack over time in places
where different floor coverings meet. The consequences: Dirt pene-
trates these areas, the visual appearance suffers and a risk of injury
may sometimes even ensue.
clipstech® cover strips and the corresponding plastic support
profiles with alfer®-fix universal hole pattern in five different profile
heights are a safe bet. They protect your floor covering against neg-
ative effects for the long term.
Look forward to perfect connections and transitions that you can
count on reliably and that add the finishing touches to a high-quality
appearance.
Better sealed than sorry: Mats and accessories
Moisture can penetrate into the substrate through joints, loose and
cracked tiles, leading to efflorescence and moisture damage to the
building fabric. Sealing mats and high-quality sealing accessories
from alfer® come to the rescue and protect your property from un-
necessary damage.
Weather effects, such as frost or heat, can cause cracks in the
substrate and spalling, particularly when it comes to balconies and
terraces. But tile floor coverings can also be damaged when the
substrate creeps or recedes or when the screed develops cracks.
Isolating the covering from the substrate can be a successful solu-
tion.
10
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
Tile edgingsRange overview
Interior finishing and conversion made easy
Dry construction profiles
Wood is good – metal is better! When the application involves attic
floor renovations or installing partition walls, metal framing offers
clear benefits over wooden frame construction. They are lightweight,
cost-effective and feature, in combination with suitable insulating
materials, exemplary soundproofing and fire safety characteristics.
In addition, metal framing – unlike wooden structures – does not
absorb moisture. The frames always stay in top form, do not warp
and thus do not emit any unwanted noise.
Our easy-to-install dry construction profiles for metal framing and
drywall are guaranteed to amaze.
The perfect finishing touch: Plastering profiles
Neatly plastered walls are the “calling card” of a home. This applies
to interior and exterior plaster alike. They not only give your home a
friendly and well-maintained appearance, but also provide an impor-
tant protective function. Plastering profiles from alfer® can provide
an effective means of preventing spalling of plaster, ensure neatly
worked outlines and contribute to overall easier plastering work. En-
joy visibly more accurate results – and many admiring glances.
11
ALU
ALU
ALP
ALP
ALP
ALX
ALX
ALX
ALX
ALX
MES
EDL
EDL
EDL
EDL
EDL
PVC
PVC
ABS
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
Tile edgingsRange overview
Angle profiles 16 – 20
Quarter circle profile 21 – 25
Accessories for quarter circle profiles 26 – 32
Square edgings 33 – 34
Accessories for square edgings 35 – 36
· Angle profile· Angle profile, pliable
· Quarter circle profile
· Quarter circle external corner· Quarter circle internal corner
· Square edging
· Square tile corner
12
PVC
PVC
ALU
EHO
ALX
ALU
ALP
ALX
PVC
ALU
ALP
ALX
MES
PVC
ABS
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
Tile edgingsRange overview
Accessories for tiles 37 – 38
Step edging profiles 39 – 41
Tile edgings system for steps 42 – 44
Joint cover profiles and expansion joint profiles 45 – 48
Wet sealing profiles 48 – 49
· Tile spacer· Tile T· Tile wedge
· Step edging profile “Florentine”· Step edging profile “Real wood”, type 1· Step edging profile “Real wood”, type 2· Step edging profile “Simple”
· Complete standard set· Complete system set· Standard profile for steps
· Accessory set for edge joint cover profiles· Edge joint cover profile· Expansion joint profile· Expansion joint profile for thick beds· Joint cover profile
· Adhesive tape for wet sealing profiles· Self-adhesive sealing rail set· Wall connection profile with alfer®-fix· Wet sealing profile
13
ALX
ALP
PVC
STA
PE
PP
EPDM
ALU
PVC
STA
STA
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
Tile edgingsRange overview
clipstech® system profiles | Floor covering height ranges 50 – 53
Mats and accessories 54 – 57
Dry construction profiles 58 – 59
Plastering profiles 60
· clipstech® cover strip· clipstech® support profile· Countersunk screw with plug· Plug system
· Balcony bracket· Drainage mat· External angle· Internal angle· Isolation and impact sound insulating mat· Isolation and sealing mat
· Perforated sealing strip· Professional sealing tape· Sealing film· Sealing strip, one side self-adhesive· Wall sleeve
· Corner bead· Dry construction profile· Maxi wall C-profile· U-profile for wall· Wall covering corner bar
· Corner bead· Depth gauge beads
14
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
Tile edgingsRange overview
Index | Product names A–Z IND-4
Explanations page 2
Index | Item number summary IND-4 – IND-9
Terms and Conditions of Supply and Payment IND-10
Available in a choice of colours IND-11
alfer® makes you mobile IND-1
alfer® ranges IND-2 – IND-3
15
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
Tile edgings
16
ALU
ALX
A
A B C D
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
· alfer®-fix universal punching
Min. OU: 5 pcs.
Uncoated aluminium
Colour Dim. a Dim. b Packaging
A uncoated 3.0 mm 21.0 mm loose
A uncoated 4.5 mm 21.0 mm loose
A uncoated 6.0 mm 21.0 mm loose
A uncoated 8.0 mm 21.0 mm loose
A uncoated 10.0 mm 21.0 mm loose
A uncoated 12.5 mm 21.0 mm loose
A uncoated 15.0 mm 21.0 mm loose
Tile edgingsAngle profiles
· alfer®-fix universal punching
Min. OU: 5 pcs.
Anodized aluminium
Colour Dim. a Dim. b Packaging
A silver 4.5 mm 21.0 mm loose
A silver 6.0 mm 21.0 mm loose
A silver 8.0 mm 21.0 mm loose
A silver 10.0 mm 21.0 mm loose
A silver 12.5 mm 21.0 mm loose
A silver 15.0 mm 21.0 mm loose
B brass 4.5 mm 21.0 mm loose
B brass 6.0 mm 21.0 mm loose
B brass 8.0 mm 21.0 mm loose
B brass 10.0 mm 21.0 mm loose
B brass 12.5 mm 21.0 mm loose
B brass 15.0 mm 21.0 mm loose
C bronze 6.0 mm 21.0 mm loose
C bronze 8.0 mm 21.0 mm loose
C bronze 10.0 mm 21.0 mm loose
C bronze 12.5 mm 21.0 mm loose
C bronze 15.0 mm 21.0 mm loose
D titanium 4.5 mm 21.0 mm loose
D titanium 6.0 mm 21.0 mm loose
D titanium 8.0 mm 21.0 mm loose
D titanium 10.0 mm 21.0 mm loose
length: 1.00m
EAN/Itemno.
4001116016080
4001116016004
4001116016011
4001116016028
4001116016035
4001116016042
4001116026089
4001116026003
4001116026010
4001116026027
4001116026034
4001116026041
4001116036002
4001116036019
4001116036026
4001116036033
4001116036040
4001116016189
4001116016103
4001116016110
4001116016127
length: 2.50m
EAN/Itemno.
4001116702136
4001116702082
4001116702099
4001116702105
4001116702112
4001116702129
4001116702204
4001116702150
4001116702167
4001116702174
4001116702181
4001116702198
4001116702228
4001116702235
4001116702242
4001116702259
4001116702266
4001116702709
4001116702716
4001116702723
4001116702730
length: 1.00m
EAN/Itemno.
4001116006098
4001116006081
4001116006005
4001116006012
4001116006029
4001116006036
4001116006043
length: 2.50m
EAN/Itemno.
4001116702075
4001116702068
4001116702013
4001116702020
4001116702037
4001116702044
4001116702051
Angle profile
Angle profile
17
ALP
MES
A
A B C
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
Anodized aluminium
Colour Dim. a Dim. b Packaging
Continued from the previous page
Tile edgingsAngle profiles
D titanium 12.5 mm 21.0 mm loose
D titanium 15.0 mm 21.0 mm loose
4001116702747
4001116702754
4001116016134
4001116016141
· alfer®-fix universal punching
Min. OU: 5 pcs.
Powder-coated aluminium
Colour Dim. a Dim. b Packaging
A brilliant-white 6.0 mm 21.0 mm loose
A brilliant-white 8.0 mm 21.0 mm loose
A brilliant-white 10.0 mm 21.0 mm loose
A brilliant-white 12.5 mm 21.0 mm loose
A brilliant-white 15.0 mm 21.0 mm loose
B bahama beige 6.0 mm 21.0 mm loose
B bahama beige 8.0 mm 21.0 mm loose
B bahama beige 10.0 mm 21.0 mm loose
B bahama beige 12.5 mm 21.0 mm loose
B bahama beige 15.0 mm 21.0 mm loose
C manhattan grey 6.0 mm 21.0 mm loose
C manhattan grey 8.0 mm 21.0 mm loose
C manhattan grey 10.0 mm 21.0 mm loose
C manhattan grey 12.5 mm 21.0 mm loose
C manhattan grey 15.0 mm 21.0 mm loose
· alfer®-fix universal punching
Min. OU: 5 pcs.
Solid brass
Colour Dim. a Dim. b Packaging
A brass 6.0 mm 21.0 mm loose
A brass 8.0 mm 21.0 mm loose
A brass 10.0 mm 21.0 mm loose
A brass 12.5 mm 21.0 mm loose
A brass 15.0 mm 21.0 mm loose
length: 1.00m
EAN/Itemno.
4001116700606
4001116700613
4001116700620
4001116700637
4001116700644
4001116036309
4001116036316
4001116036323
4001116036330
4001116036347
4001116036408
4001116036415
4001116036422
4001116036439
4001116036446
length: 2.50m
EAN/Itemno.
4001116702600
4001116702617
4001116702624
4001116702631
4001116702648
4001116702365
4001116702372
4001116702389
4001116702396
4001116702402
4001116702433
4001116702440
4001116702457
4001116702464
4001116702471
length: 2.50m
EAN/Itemno.
length: 1.00m
EAN/Itemno.
length: 1.00m
EAN/Itemno.
4001116206108
4001116206115
4001116206122
4001116206139
4001116206146
length: 2.50m
EAN/Itemno.
4001116702921
4001116702938
4001116702945
4001116702952
4001116702969
Angle profile
Angle profile
18
EDL
EDL
A
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
Tile edgingsAngle profiles
· alfer®-fix universal punching
Min. OU: 5 pcs.
Stainless steel V2A
Colour Dim. a Dim. b Packaging
A stainless steel 6.0 mm 21.0 mm loose
A stainless steel 8.0 mm 21.0 mm loose
A stainless steel 10.0 mm 21.0 mm loose
A stainless steel 12.5 mm 21.0 mm loose
A stainless steel 15.0 mm 21.0 mm loose
· alfer®-fix universal punching
Min. OU: 5 pcs.
Stainless steel V2A, brushed
Colour Dim. a Dim. b Packaging
A stainless steel 6.0 mm 21.0 mm loose
A stainless steel 8.0 mm 21.0 mm loose
A stainless steel 10.0 mm 21.0 mm loose
A stainless steel 12.5 mm 21.0 mm loose
A stainless steel 15.0 mm 21.0 mm loose
length: 1.00m
EAN/Itemno.
4001116700927
4001116700934
4001116700941
4001116700958
4001116700965
length: 2.50m
EAN/Itemno.
4001116703027
4001116703034
4001116703041
4001116703058
4001116703065
length: 1.00m
EAN/Itemno.
4001116700828
4001116700835
4001116700842
4001116700859
4001116700866
length: 2.50m
EAN/Itemno.
4001116702822
4001116702839
4001116702846
4001116702853
4001116702860
Angle profile
Angle profile
19
EDL
PVC
A
A B C D E
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
Tile edgingsAngle profiles
· alfer®-fix universal punching
Min. OU: 5 pcs.
Stainless steel V2A, polished
Colour Dim. a Dim. b Packaging
A stainless steel 6.0 mm 21.0 mm loose
A stainless steel 8.0 mm 21.0 mm loose
A stainless steel 10.0 mm 21.0 mm loose
A stainless steel 12.5 mm 21.0 mm loose
A stainless steel 15.0 mm 21.0 mm loose
· alfer®-fix universal punching
Min. OU: 5 pcs.
Plastic (hard PVC)
Colour Dim. a Dim. b Packaging
A white 6.0 mm 21.0 mm loose
A white 8.0 mm 21.0 mm loose
A white 10.0 mm 21.0 mm loose
A white 12.5 mm 21.0 mm loose
B brilliant-white 6.0 mm 21.0 mm loose
B brilliant-white 8.0 mm 21.0 mm loose
B brilliant-white 10.0 mm 21.0 mm loose
B brilliant-white 12.5 mm 21.0 mm loose
C bahama beige 6.0 mm 21.0 mm loose
C bahama beige 8.0 mm 21.0 mm loose
C bahama beige 10.0 mm 21.0 mm loose
C bahama beige 12.5 mm 21.0 mm loose
D manhattan grey 6.0 mm 21.0 mm loose
D manhattan grey 8.0 mm 21.0 mm loose
D manhattan grey 10.0 mm 21.0 mm loose
D manhattan grey 12.5 mm 21.0 mm loose
E jasmin-pergamon 6.0 mm 21.0 mm loose
E jasmin-pergamon 8.0 mm 21.0 mm loose
E jasmin-pergamon 10.0 mm 21.0 mm loose
E jasmin-pergamon 12.5 mm 21.0 mm loose
length: 1.00m
EAN/Itemno.
4001116704857
4001116704864
4001116704871
4001116704888
4001116704154
4001116704161
4001116704178
4001116704185
4001116704642
4001116704659
4001116704666
4001116704673
4001116704925
4001116704932
4001116704949
4001116704956
length: 2.50m
EAN/Itemno.
4001116706011
4001116706028
4001116706035
4001116706042
4001116706851
4001116706868
4001116706875
4001116706882
4001116706158
4001116706165
4001116706172
4001116706189
4001116706646
4001116706653
4001116706660
4001116706677
4001116706929
4001116706936
4001116706943
4001116706950
length: 1.00m
EAN/Itemno.
4001116701023
4001116701030
4001116701047
4001116701054
4001116701061
length: 2.50m
EAN/Itemno.
4001116703126
4001116703133
4001116703140
4001116703157
4001116703164
Angle profile
Angle profile
20
ALX
A B
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
Tile edgingsAngle profiles
· Ideal for curved sections
Min. OU: 5 pcs.
Anodized aluminium
Colour Dim. a Dim. b Packaging
A silver 8.0 mm 21.0 mm shrink-wrapped SS, with wood insert
A silver 10.0 mm 21.0 mm shrink-wrapped SS, with wood insert
A silver 12.5 mm 21.0 mm shrink-wrapped SS, with wood insert
B brass 8.0 mm 21.0 mm shrink-wrapped SS, with wood insert
B brass 10.0 mm 21.0 mm shrink-wrapped SS, with wood insert
length: 2.50m
EAN/Itemno.
4001116782022
4001116782039
4001116782046
4001116782121
4001116782138
Angle profile, pliable
21
ALU
ALX
A
A B C D E
F
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
· alfer®-fix universal punching
Min. OU: 5 pcs.
Uncoated aluminium
Colour Dim. a Dim. b Packaging
A uncoated 6.0 mm 19.5 mm loose
A uncoated 8.0 mm 19.5 mm loose
A uncoated 10.0 mm 19.5 mm loose
A uncoated 12.5 mm 19.5 mm loose
A uncoated 15.0 mm 19.5 mm loose
Tile edgingsQuarter circle profiles
· alfer®-fix universal punching
Min. OU: 5 pcs.
Anodized aluminium
Colour Dim. a Dim. b Packaging
A silver 6.0 mm 19.5 mm loose
A silver 8.0 mm 19.5 mm loose
A silver 10.0 mm 19.5 mm loose
A silver 12.5 mm 19.5 mm loose
A silver 15.0 mm 19.5 mm loose
A silver 6.0 mm 19.5 mm shrink-wrapped
A silver 8.0 mm 19.5 mm shrink-wrapped
A silver 10.0 mm 19.5 mm shrink-wrapped
A silver 12.5 mm 19.5 mm shrink-wrapped
B polished silver 6.0 mm 19.5 mm shrink-wrapped
B polished silver 8.0 mm 19.5 mm shrink-wrapped
B polished silver 10.0 mm 19.5 mm shrink-wrapped
B polished silver 12.5 mm 19.5 mm shrink-wrapped
B polished silver 15.0 mm 19.5 mm shrink-wrapped
C brass, glossy 6.0 mm 19.5 mm shrink-wrapped
C brass, glossy 8.0 mm 19.5 mm shrink-wrapped
C brass, glossy 10.0 mm 19.5 mm shrink-wrapped
C brass, glossy 12.5 mm 19.5 mm shrink-wrapped
C brass, glossy 15.0 mm 19.5 mm shrink-wrapped
D titanium 6.0 mm 19.5 mm loose
D titanium 8.0 mm 19.5 mm loose
D titanium 10.0 mm 19.5 mm loose
D titanium 12.5 mm 19.5 mm loose
length: 1.00m
EAN/Itemno.
4001116722127
4001116722134
4001116722141
4001116722158
4001116722165
4001116722226
4001116722233
4001116722240
4001116722257
4001116722264
4001116722424
4001116722431
4001116722448
4001116722455
4001116722462
4001116723223
4001116723230
4001116723247
4001116723254
length: 2.50m
EAN/Itemno.
4001116722172
4001116722189
4001116722196
4001116722202
4001116722219
4001116723070
4001116723087
4001116723094
4001116723100
4001116722271
4001116722288
4001116722295
4001116722301
4001116722318
4001116722479
4001116722486
4001116722493
4001116722509
4001116722516
4001116723278
4001116723285
4001116723292
4001116723308
length: 1.00m
EAN/Itemno.
4001116722028
4001116722035
4001116722042
4001116722059
4001116722066
length: 2.50m
EAN/Itemno.
4001116722073
4001116722080
4001116722097
4001116722103
4001116722110
Quarter circle profile
Quarter circle profile
22
ALP
A B C D
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
Anodized aluminium
Colour Dim. a Dim. b Packaging
Continued from the previous page
Tile edgingsQuarter circle profiles
D titanium 15.0 mm 19.5 mm loose
E brushed black 6.0 mm 19.5 mm shrink-wrapped
E brushed black 8.0 mm 19.5 mm shrink-wrapped
E brushed black 10.0 mm 19.5 mm shrink-wrapped
E brushed black 12.5 mm 19.5 mm shrink-wrapped
E brushed black 15.0 mm 19.5 mm shrink-wrapped
F chrome look 6.0 mm 19.5 mm shrink-wrapped
F chrome look 8.0 mm 19.5 mm shrink-wrapped
F chrome look 10.0 mm 19.5 mm shrink-wrapped
F chrome look 12.5 mm 19.5 mm shrink-wrapped
F chrome look 15.0 mm 19.5 mm shrink-wrapped
4001116723315
4001116723377
4001116723384
4001116723391
4001116723407
4001116723414
4001116723179
4001116723186
4001116723193
4001116723209
4001116723216
4001116723261
4001116723322
4001116723339
4001116723346
4001116723353
4001116723360
4001116723124
4001116723131
4001116723148
4001116723155
4001116723162
· alfer®-fix universal punching
Min. OU: 5 pcs.
Powder-coated aluminium
Colour Dim. a Dim. b Packaging
A brilliant-white 6.0 mm 19.5 mm loose
A brilliant-white 8.0 mm 19.5 mm loose
A brilliant-white 10.0 mm 19.5 mm loose
A brilliant-white 12.5 mm 19.5 mm loose
A brilliant-white 15.0 mm 19.5 mm loose
B bahama beige 6.0 mm 19.5 mm loose
B bahama beige 8.0 mm 19.5 mm loose
B bahama beige 10.0 mm 19.5 mm loose
B bahama beige 12.5 mm 19.5 mm loose
B bahama beige 15.0 mm 19.5 mm loose
C manhattan grey 6.0 mm 19.5 mm loose
C manhattan grey 8.0 mm 19.5 mm loose
C manhattan grey 10.0 mm 19.5 mm loose
C manhattan grey 12.5 mm 19.5 mm loose
C manhattan grey 15.0 mm 19.5 mm loose
D jasmin-pergamon 6.0 mm 19.5 mm loose
D jasmin-pergamon 8.0 mm 19.5 mm loose
D jasmin-pergamon 10.0 mm 19.5 mm loose
D jasmin-pergamon 12.5 mm 19.5 mm loose
D jasmin-pergamon 15.0 mm 19.5 mm loose
length: 1.00m
EAN/Itemno.
4001116722523
4001116722530
4001116722547
4001116722554
4001116722561
4001116722929
4001116722936
4001116722943
4001116722950
4001116722967
4001116722622
4001116722639
4001116722646
4001116722653
4001116722660
4001116722820
4001116722837
4001116722844
4001116722851
4001116722868
length: 2.50m
EAN/Itemno.
4001116722578
4001116722585
4001116722592
4001116722608
4001116722615
4001116722974
4001116722981
4001116722998
4001116723001
4001116723018
4001116722677
4001116722684
4001116722691
4001116722707
4001116722714
4001116722875
4001116722882
4001116722899
4001116722905
4001116722912
length: 2.50m
EAN/Itemno.
length: 1.00m
EAN/Itemno.
Quarter circle profile
23
EDL
EDL
EDL
A
A
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
Tile edgingsQuarter circle profiles
· alfer®-fix universal punching
Min. OU: 5 pcs.
Stainless steel V2A
Colour Dim. a Dim. b Packaging
A stainless steel 6.0 mm 20.0 mm loose
A stainless steel 8.0 mm 20.0 mm loose
A stainless steel 10.0 mm 20.0 mm loose
A stainless steel 12.5 mm 20.0 mm loose
· alfer®-fix universal punching
Min. OU: 5 pcs.
Stainless steel V2A, brushed
Colour Dim. a Dim. b Packaging
A stainless steel 6.0 mm 20.0 mm loose
A stainless steel 8.0 mm 20.0 mm loose
A stainless steel 10.0 mm 20.0 mm loose
A stainless steel 12.5 mm 20.0 mm loose
· alfer®-fix universal punching
Min. OU: 5 pcs.
Stainless steel V2A, polished
Colour Dim. a Dim. b Packaging
A stainless steel 6.0 mm 20.0 mm loose
A stainless steel 8.0 mm 20.0 mm loose
A stainless steel 10.0 mm 20.0 mm loose
A stainless steel 12.5 mm 20.0 mm loose
length: 1.00m
EAN/Itemno.
4001116701122
4001116701139
4001116701146
4001116701153
length: 2.50m
EAN/Itemno.
4001116703225
4001116703232
4001116703249
4001116703256
length: 1.00m
EAN/Itemno.
4001116708459
4001116708473
4001116708480
4001116715082
length: 2.50m
EAN/Itemno.
4001116710131
4001116710155
4001116710162
4001116715488
length: 1.00m
EAN/Itemno.
4001116701221
4001116701238
4001116701245
4001116701252
length: 2.50m
EAN/Itemno.
4001116703324
4001116703331
4001116703348
4001116703355
Quarter circle profile
Quarter circle profile
Quarter circle profile
24
PVC
A B C D E
F G
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
Tile edgingsQuarter circle profiles
· alfer®-fix universal punching
Min. OU: 5 pcs.
Plastic (hard PVC)
Colour Dim. a Dim. b Packaging
A brilliant-white 6.0 mm 19.5 mm loose
A brilliant-white 8.0 mm 19.5 mm loose
A brilliant-white 10.0 mm 19.5 mm loose
A brilliant-white 12.5 mm 19.5 mm loose
B bahama beige 6.0 mm 19.5 mm loose
B bahama beige 8.0 mm 19.5 mm loose
B bahama beige 10.0 mm 19.5 mm loose
B bahama beige 12.5 mm 19.5 mm loose
C manhattan grey 6.0 mm 19.5 mm loose
C manhattan grey 8.0 mm 19.5 mm loose
C manhattan grey 10.0 mm 19.5 mm loose
C manhattan grey 12.5 mm 19.5 mm loose
D jasmin-pergamon 6.0 mm 19.5 mm loose
D jasmin-pergamon 8.0 mm 19.5 mm loose
D jasmin-pergamon 10.0 mm 19.5 mm loose
D jasmin-pergamon 12.5 mm 19.5 mm loose
E dark grey 6.0 mm 19.5 mm loose
E dark grey 8.0 mm 19.5 mm loose
E dark grey 10.0 mm 19.5 mm loose
E dark grey 12.5 mm 19.5 mm loose
F taupe 6.0 mm 19.5 mm loose
F taupe 8.0 mm 19.5 mm loose
F taupe 10.0 mm 19.5 mm loose
F taupe 12.5 mm 19.5 mm loose
G black 6.0 mm 19.5 mm loose
G black 8.0 mm 19.5 mm loose
G black 10.0 mm 19.5 mm loose
G black 12.5 mm 19.5 mm loose
length: 1.00m
EAN/Itemno.
4001116720024
4001116720031
4001116720048
4001116720055
4001116720420
4001116720437
4001116720444
4001116720451
4001116720123
4001116720130
4001116720147
4001116720154
4001116720321
4001116720338
4001116720345
4001116720352
4001116720222
4001116720239
4001116720246
4001116720253
4001116720925
4001116720932
4001116720949
4001116720956
4001116721021
4001116721038
4001116721045
4001116721052
length: 2.50m
EAN/Itemno.
4001116720079
4001116720086
4001116720093
4001116720109
4001116720475
4001116720482
4001116720499
4001116720505
4001116720178
4001116720185
4001116720192
4001116720208
4001116720376
4001116720383
4001116720390
4001116720406
4001116720277
4001116720284
4001116720291
4001116720307
4001116720970
4001116720987
4001116720994
4001116721007
4001116721076
4001116721083
4001116721090
4001116721106
Quarter circle profile
25
PVC
A B C D
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
Tile edgingsQuarter circle profiles
· alfer®-fix universal punching
Min. OU: 5 pcs.
Plastic (hard PVC), hot-embossed
Colour Dim. a Dim. b Packaging
A polished white 6.0 mm 19.5 mm loose
A polished white 8.0 mm 19.5 mm loose
A polished white 10.0 mm 19.5 mm loose
A polished white 12.5 mm 19.5 mm loose
B polished jasmine-pergamon 6.0 mm 19.5 mm loose
B polished jasmine-pergamon 8.0 mm 19.5 mm loose
B polished jasmine-pergamon 10.0 mm 19.5 mm loose
B polished jasmine-pergamon 12.5 mm 19.5 mm loose
C polished manhattan grey 6.0 mm 19.5 mm loose
C polished manhattan grey 8.0 mm 19.5 mm loose
C polished manhattan grey 10.0 mm 19.5 mm loose
C polished manhattan grey 12.5 mm 19.5 mm loose
D marbled white 6.0 mm 19.5 mm loose
D marbled white 8.0 mm 19.5 mm loose
D marbled white 10.0 mm 19.5 mm loose
D marbled white 12.5 mm 19.5 mm loose
length: 1.00m
EAN/Itemno.
4001116720628
4001116720635
4001116720642
4001116720659
4001116720826
4001116720833
4001116720840
4001116720857
4001116720727
4001116720734
4001116720741
4001116720758
4001116720529
4001116720536
4001116720543
4001116720550
length: 2.50m
EAN/Itemno.
4001116720673
4001116720680
4001116720697
4001116720703
4001116720871
4001116720888
4001116720895
4001116720901
4001116720772
4001116720789
4001116720796
4001116720802
4001116720574
4001116720581
4001116720598
4001116720604
Quarter circle profile
26
ALX
A B C D E
F
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
Min. OU: 5 pcs.
Anodized aluminium
Colour Tile size Dim. a Packaging
A silver 6.0 mm 7.5 mm SS box
A silver 8.0 mm 9.5 mm SS box
A silver 10.0 mm 11.5 mm SS box
A silver 12.5 mm 14.0 mm SS box
A silver 15.0 mm 16.5 mm SS box
B polished silver 6.0 mm 7.5 mm SS box
B polished silver 8.0 mm 9.5 mm SS box
B polished silver 10.0 mm 11.5 mm SS box
B polished silver 12.5 mm 14.0 mm SS box
B polished silver 15.0 mm 16.5 mm SS box
C brass, glossy 6.0 mm 7.5 mm SS box
C brass, glossy 8.0 mm 9.5 mm SS box
C brass, glossy 10.0 mm 11.5 mm SS box
C brass, glossy 12.5 mm 14.0 mm SS box
C brass, glossy 15.0 mm 16.5 mm SS box
D titanium 6.0 mm 7.5 mm SS box
D titanium 8.0 mm 9.5 mm SS box
D titanium 10.0 mm 11.5 mm SS box
D titanium 12.5 mm 14.0 mm SS box
D titanium 15.0 mm 16.5 mm SS box
E brushed black 6.0 mm 7.5 mm SS box
E brushed black 8.0 mm 9.5 mm SS box
E brushed black 10.0 mm 11.5 mm SS box
E brushed black 12.5 mm 14.0 mm SS box
E brushed black 15.0 mm 16.5 mm SS box
F chrome look 6.0 mm 7.5 mm SS box
F chrome look 8.0 mm 9.5 mm SS box
F chrome look 10.0 mm 11.5 mm SS box
F chrome look 12.5 mm 14.0 mm SS box
F chrome look 15.0 mm 16.5 mm SS box
Tile edgingsAccessories for quarter circle profiles
EAN/ Itemno.
4001116781506
4001116781513
4001116781520
4001116781537
4001116781544
4001116781568
4001116781575
4001116781582
4001116781599
4001116781551
4001116782206
4001116782213
4001116782220
4001116782237
4001116782244
4001116781469
4001116781476
4001116781483
4001116781490
4001116781452
4001116782602
4001116782619
4001116782626
4001116782633
4001116782640
4001116781605
4001116781612
4001116781629
4001116781636
4001116781643
Quarter circle external corner
27
ALP
EDL
EDL
A
A
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
Min. OU: 5 pcs.
Powder-coated aluminium
Colour Tile size Dim. a Packaging
A brilliant-white 6.0 mm 7.5 mm SS box
A brilliant-white 8.0 mm 9.5 mm SS box
A brilliant-white 10.0 mm 11.5 mm SS box
A brilliant-white 12.5 mm 14.0 mm SS box
A brilliant-white 15.0 mm 16.5 mm SS box
Tile edgingsAccessories for quarter circle profiles
Min. OU: 5 pcs.
Stainless steel 1.4305
Colour Tile size Dim. a Packaging
A stainless steel 6.0 mm 7.5 mm SS box
A stainless steel 8.0 mm 9.5 mm SS box
A stainless steel 10.0 mm 11.5 mm SS box
A stainless steel 12.5 mm 14.0 mm SS box
Min. OU: 5 pcs.
Brushed stainless steel
Colour Tile size Dim. a Packaging
A stainless steel 6.0 mm 7.5 mm SS box
A stainless steel 8.0 mm 9.5 mm SS box
A stainless steel 10.0 mm 11.5 mm SS box
A stainless steel 12.5 mm 14.0 mm SS box
EAN/ Itemno.
4001116784057
4001116784064
4001116784071
4001116784088
EAN/ Itemno.
4001116782251
4001116782268
4001116782275
4001116782282
EAN/ Itemno.
4001116781407
4001116781414
4001116781421
4001116781438
4001116781445
Quarter circle external corner
Quarter circle external corner
Quarter circle external corner
28
EDL
ABS
A
A B C D E
F G H
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
Min. OU: 5 pcs.
Stainless steel, polished
Colour Tile size Dim. a Packaging
A stainless steel 6.0 mm 7.5 mm SS box
A stainless steel 8.0 mm 9.5 mm SS box
A stainless steel 10.0 mm 11.5 mm SS box
A stainless steel 12.5 mm 14.0 mm SS box
Tile edgingsAccessories for quarter circle profiles
Min. OU: 5 pcs.
Plastic (ABS)
Colour Tile size Dim. a PU Packaging
A silver 6.0 mm 7.5 mm 4 pieces SS box
A silver 8.0 mm 9.5 mm 4 pieces SS box
A silver 10.0 mm 11.5 mm 4 pieces SS box
A silver 12.5 mm 14.0 mm 4 pieces SS box
B brilliant-white 6.0 mm 7.5 mm 4 pieces SS box
B brilliant-white 8.0 mm 9.5 mm 4 pieces SS box
B brilliant-white 10.0 mm 11.5 mm 4 pieces SS box
B brilliant-white 12.5 mm 14.0 mm 4 pieces SS box
C bahama beige 6.0 mm 7.5 mm 4 pieces SS box
C bahama beige 8.0 mm 9.5 mm 4 pieces SS box
C bahama beige 10.0 mm 11.5 mm 4 pieces SS box
C bahama beige 12.5 mm 14.0 mm 4 pieces SS box
D manhattan grey 6.0 mm 7.5 mm 4 pieces SS box
D manhattan grey 8.0 mm 9.5 mm 4 pieces SS box
D manhattan grey 10.0 mm 11.5 mm 4 pieces SS box
D manhattan grey 12.5 mm 14.0 mm 4 pieces SS box
E jasmin-pergamon 6.0 mm 7.5 mm 4 pieces SS box
E jasmin-pergamon 8.0 mm 9.5 mm 4 pieces SS box
E jasmin-pergamon 10.0 mm 11.5 mm 4 pieces SS box
E jasmin-pergamon 12.5 mm 14.0 mm 4 pieces SS box
F dark grey 6.0 mm 7.5 mm 4 pieces SS box
F dark grey 8.0 mm 9.5 mm 4 pieces SS box
F dark grey 10.0 mm 11.5 mm 4 pieces SS box
F dark grey 12.5 mm 14.0 mm 4 pieces SS box
EAN/ Itemno.
4001116780608
4001116780615
4001116780622
4001116780639
4001116780707
4001116780714
4001116780721
4001116780738
4001116780905
4001116780912
4001116780929
4001116780936
4001116780752
4001116780769
4001116780776
4001116780783
4001116780851
4001116780868
4001116780875
4001116780882
4001116780806
4001116780813
4001116780820
4001116780783
EAN/ Itemno.
4001116784156
4001116784163
4001116784170
4001116784187
Quarter circle external corner
Quarter circle external corner
29
ALX
A B C D E
F
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
Plastic (ABS)
Colour Tile size Dim. a PU Packaging
Continued from the previous page
Tile edgingsAccessories for quarter circle profiles
G taupe 6.0 mm 7.5 mm 4 pieces SS box
G taupe 8.0 mm 9.5 mm 4 pieces SS box
G taupe 10.0 mm 11.5 mm 4 pieces SS box
G taupe 12.5 mm 14.0 mm 4 pieces SS box
H black 6.0 mm 7.5 mm 4 pieces SS box
H black 8.0 mm 9.5 mm 4 pieces SS box
H black 10.0 mm 11.5 mm 4 pieces SS box
H black 12.5 mm 14.0 mm 4 pieces SS box
4001116782305
4001116782312
4001116782329
4001116782336
4001116782350
4001116782367
4001116782374
4001116782381
Min. OU: 5 pcs.
Anodized aluminium
Colour Tile size Dim. a Packaging
A silver 6.0 mm 7.5 mm SS box
A silver 8.0 mm 9.5 mm SS box
A silver 10.0 mm 11.5 mm SS box
A silver 12.5 mm 14.0 mm SS box
A silver 15.0 mm 16.5 mm SS box
B polished silver 6.0 mm 7.5 mm SS box
B polished silver 8.0 mm 9.5 mm SS box
B polished silver 10.0 mm 11.5 mm SS box
B polished silver 12.5 mm 14.0 mm SS box
B polished silver 15.0 mm 16.5 mm SS box
C brass, glossy 6.0 mm 7.5 mm SS box
C brass, glossy 8.0 mm 9.5 mm SS box
C brass, glossy 10.0 mm 11.5 mm SS box
C brass, glossy 12.5 mm 14.0 mm SS box
C brass, glossy 15.0 mm 16.5 mm SS box
D titanium 6.0 mm 7.5 mm SS box
D titanium 8.0 mm 9.5 mm SS box
D titanium 10.0 mm 11.5 mm SS box
D titanium 12.5 mm 14.0 mm SS box
D titanium 15.0 mm 16.5 mm SS box
E brushed black 6.0 mm 7.5 mm SS box
E brushed black 8.0 mm 9.5 mm SS box
E brushed black 10.0 mm 11.5 mm SS box
E brushed black 12.5 mm 14.0 mm SS box
E brushed black 15.0 mm 16.5 mm SS box
F chrome look 6.0 mm 7.5 mm SS box
F chrome look 8.0 mm 9.5 mm SS box
F chrome look 10.0 mm 11.5 mm SS box
F chrome look 12.5 mm 14.0 mm SS box
F chrome look 15.0 mm 16.5 mm SS box
EAN/ Itemno.
4001116783500
4001116783517
4001116783524
4001116783531
4001116783548
4001116783562
4001116783579
4001116783586
4001116783593
4001116783555
4001116783708
4001116783715
4001116783722
4001116783739
4001116783746
4001116783463
4001116783470
4001116783487
4001116783494
4001116783456
4001116782701
4001116782718
4001116782725
4001116782732
4001116782749
4001116783609
4001116783616
4001116783623
4001116783630
4001116783647
EAN/ Itemno.
Quarter circle internal corner
30
ALP
EDL
EDL
A
A
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
Min. OU: 5 pcs.
Powder-coated aluminium
Colour Tile size Dim. a Packaging
A brilliant-white 6.0 mm 7.5 mm SS box
A brilliant-white 8.0 mm 9.5 mm SS box
A brilliant-white 10.0 mm 11.5 mm SS box
A brilliant-white 12.5 mm 14.0 mm SS box
A brilliant-white 15.0 mm 16.5 mm SS box
Tile edgingsAccessories for quarter circle profiles
Min. OU: 5 pcs.
Stainless steel 4305
Colour Tile size Dim. a Packaging
A stainless steel 6.0 mm 5.8 mm SS box
A stainless steel 8.0 mm 7.5 mm SS box
A stainless steel 10.0 mm 9.5 mm SS box
A stainless steel 12.5 mm 11.5 mm SS box
Min. OU: 5 pcs.
Stainless steel 4305, brushed
Colour Tile size Dim. a Packaging
A stainless steel 6.0 mm 5.8 mm SS box
A stainless steel 8.0 mm 7.5 mm SS box
A stainless steel 10.0 mm 9.5 mm SS box
A stainless steel 12.5 mm 11.5 mm SS box
EAN/ Itemno.
4001116784002
4001116784019
4001116784026
4001116784033
EAN/ Itemno.
4001116783753
4001116783760
4001116783777
4001116783784
EAN/ Itemno.
4001116783401
4001116783418
4001116783425
4001116783432
4001116783449
Quarter circle internal corner
Quarter circle internal corner
Quarter circle internal corner
31
EDL
ABS
A
A B C D E
F G H
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
Min. OU: 5 pcs.
Stainless steel 4305, polished
Colour Tile size Dim. a Packaging
A stainless steel 6.0 mm 5.8 mm SS box
A stainless steel 8.0 mm 7.5 mm SS box
A stainless steel 10.0 mm 9.5 mm SS box
A stainless steel 12.5 mm 11.5 mm SS box
Tile edgingsAccessories for quarter circle profiles
Min. OU: 5 pcs.
Plastic (ABS)
Colour Tile size Dim. a PU Packaging
A silver 6.0 mm 7.5 mm 4 pieces SS box
A silver 8.0 mm 9.5 mm 4 pieces SS box
A silver 10.0 mm 11.5 mm 4 pieces SS box
A silver 12.5 mm 14.0 mm 4 pieces SS box
B brilliant-white 6.0 mm 7.5 mm 4 pieces SS box
B brilliant-white 8.0 mm 9.5 mm 4 pieces SS box
B brilliant-white 10.0 mm 11.5 mm 4 pieces SS box
B brilliant-white 12.5 mm 14.0 mm 4 pieces SS box
C bahama beige 6.0 mm 7.5 mm 4 pieces SS box
C bahama beige 8.0 mm 9.5 mm 4 pieces SS box
C bahama beige 10.0 mm 11.5 mm 4 pieces SS box
C bahama beige 12.5 mm 14.0 mm 4 pieces SS box
D manhattan grey 6.0 mm 7.5 mm 4 pieces SS box
D manhattan grey 8.0 mm 9.5 mm 4 pieces SS box
D manhattan grey 10.0 mm 11.5 mm 4 pieces SS box
D manhattan grey 12.5 mm 14.0 mm 4 pieces SS box
E jasmin-pergamon 6.0 mm 7.5 mm 4 pieces SS box
E jasmin-pergamon 8.0 mm 9.5 mm 4 pieces SS box
E jasmin-pergamon 10.0 mm 11.5 mm 4 pieces SS box
E jasmin-pergamon 12.5 mm 14.0 mm 4 pieces SS box
F dark grey 6.0 mm 7.5 mm 4 pieces SS box
F dark grey 8.0 mm 9.5 mm 4 pieces SS box
F dark grey 10.0 mm 11.5 mm 4 pieces SS box
F dark grey 12.5 mm 14.0 mm 4 pieces SS box
EAN/ Itemno.
4001116781001
4001116781018
4001116781025
4001116781032
4001116781100
4001116781117
4001116781124
4001116781131
4001116781308
4001116781315
4001116781322
4001116781339
4001116781155
4001116781162
4001116781179
4001116781186
4001116781254
4001116781261
4001116781278
4001116781285
4001116781209
4001116781216
4001116781223
4001116781230
EAN/ Itemno.
4001116784101
4001116784118
4001116784125
4001116784132
Quarter circle internal corner
Quarter circle internal corner
32
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
Plastic (ABS)
Colour Tile size Dim. a PU Packaging
Continued from the previous page
Tile edgingsAccessories for quarter circle profiles
G taupe 6.0 mm 7.5 mm 4 pieces SS box
G taupe 8.0 mm 9.5 mm 4 pieces SS box
G taupe 10.0 mm 11.5 mm 4 pieces SS box
G taupe 12.5 mm 14.0 mm 4 pieces SS box
H black 6.0 mm 7.5 mm 4 pieces SS box
H black 8.0 mm 9.5 mm 4 pieces SS box
H black 10.0 mm 11.5 mm 4 pieces SS box
H black 12.5 mm 14.0 mm 4 pieces SS box
4001116782404
4001116782411
4001116782428
4001116782435
4001116782459
4001116782466
4001116782473
4001116782480
EAN/ Itemno.
33
ALX
A B C D E
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
· alfer®-fix universal punching · Modern appearance
Min. OU: 5 pcs.
Anodized aluminium
Colour Dim. a Dim. b Packaging
A silver 6.0 mm 19.5 mm loose
A silver 8.0 mm 19.5 mm loose
A silver 10.0 mm 19.5 mm loose
A silver 12.5 mm 19.5 mm loose
B champagne 6.0 mm 19.5 mm loose
B champagne 8.0 mm 19.5 mm loose
B champagne 10.0 mm 19.5 mm loose
B champagne 12.5 mm 19.5 mm loose
C titanium 6.0 mm 19.5 mm loose
C titanium 8.0 mm 19.5 mm loose
C titanium 10.0 mm 19.5 mm loose
C titanium 12.5 mm 19.5 mm loose
D brushed black 6.0 mm 19.5 mm shrink-wrapped
D brushed black 8.0 mm 19.5 mm shrink-wrapped
D brushed black 10.0 mm 19.5 mm shrink-wrapped
D brushed black 12.5 mm 19.5 mm shrink-wrapped
E chrome look 6.0 mm 19.5 mm shrink-wrapped
E chrome look 8.0 mm 19.5 mm shrink-wrapped
E chrome look 10.0 mm 19.5 mm shrink-wrapped
E chrome look 12.5 mm 19.5 mm shrink-wrapped
Tile edgingsSquare edgings
length: 1.00m
EAN/Itemno.
4001116730023
4001116730030
4001116730047
4001116730054
4001116730221
4001116730238
4001116730245
4001116730252
4001116730320
4001116730337
4001116730344
4001116730351
4001116730528
4001116730535
4001116730542
4001116730559
4001116730429
4001116730436
4001116730443
4001116730450
length: 2.50m
EAN/Itemno.
4001116730078
4001116730085
4001116730092
4001116730108
4001116730276
4001116730283
4001116730290
4001116730306
4001116730375
4001116730382
4001116730399
4001116730405
4001116730573
4001116730580
4001116730597
4001116730603
4001116730474
4001116730481
4001116730498
4001116730504
Square edging
34
EDL
EDL
EDL
A
A
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
· alfer®-fix universal punching · Modern appearance
Min. OU: 5 pcs.
Brushed stainless steel
Colour Dim. a Dim. b Packaging
A stainless steel 6.0 mm 20.0 mm loose
A stainless steel 8.0 mm 20.0 mm loose
A stainless steel 10.0 mm 20.0 mm loose
A stainless steel 12.5 mm 20.0 mm loose
Tile edgingsSquare edgings
· alfer®-fix universal punching · Modern appearance
Min. OU: 5 pcs.
Stainless steel, polished
Colour Dim. a Dim. b Packaging
A stainless steel 6.0 mm 20.0 mm loose
A stainless steel 8.0 mm 20.0 mm loose
A stainless steel 10.0 mm 20.0 mm loose
A stainless steel 12.5 mm 20.0 mm loose
· alfer®-fix universal punching · Modern appearance
Min. OU: 5 pcs.
Stainless steel
Colour Dim. a Dim. b Packaging
A stainless steel 6.0 mm 20.0 mm loose
A stainless steel 8.0 mm 20.0 mm loose
A stainless steel 10.0 mm 20.0 mm loose
A stainless steel 12.5 mm 20.0 mm loose
length: 1.00m
EAN/Itemno.
4001116701429
4001116701436
4001116701443
4001116701450
length: 2.50m
EAN/Itemno.
4001116703522
4001116703539
4001116703546
4001116703553
length: 1.00m
EAN/Itemno.
4001116701320
4001116701337
4001116701344
4001116701351
length: 2.50m
EAN/Itemno.
4001116703423
4001116703430
4001116703447
4001116703454
length: 1.00m
EAN/Itemno.
4001116731020
4001116731037
4001116731044
4001116731051
length: 2.50m
EAN/Itemno.
4001116731075
4001116731082
4001116731099
4001116731105
Square edging
Square edging
Square edging
35
ALX
EDL
A B C D E
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
· Modern appearance
Min. OU: 5 pcs.
Anodized aluminium
Colour Tile size Dim. a Packaging
A silver 6.0 mm 7.5 mm SS box
A silver 8.0 mm 9.5 mm SS box
A silver 10.0 mm 11.5 mm SS box
A silver 12.5 mm 14.0 mm SS box
B champagne 6.0 mm 7.5 mm SS box
B champagne 8.0 mm 9.5 mm SS box
B champagne 10.0 mm 11.5 mm SS box
B champagne 12.5 mm 14.0 mm SS box
C titanium 6.0 mm 7.5 mm SS box
C titanium 8.0 mm 9.5 mm SS box
C titanium 10.0 mm 11.5 mm SS box
C titanium 12.5 mm 14.0 mm SS box
D brushed black 6.0 mm 7.5 mm SS box
D brushed black 8.0 mm 9.5 mm SS box
D brushed black 10.0 mm 11.5 mm SS box
D brushed black 12.5 mm 14.0 mm SS box
E chrome look 6.0 mm 7.5 mm SS box
E chrome look 8.0 mm 9.5 mm SS box
E chrome look 10.0 mm 11.5 mm SS box
E chrome look 12.5 mm 14.0 mm SS box
Tile edgingsAccessories for square edgings
· Modern appearance
Min. OU: 5 pcs.
Stainless steel
Colour Tile size Dim. a Packaging
A stainless steel 5.8 mm 6.0 mm SS box
A stainless steel 7.8 mm 8.0 mm SS box
A stainless steel 9.8 mm 10.0 mm SS box
A stainless steel 12.3 mm 12.5 mm SS box
EAN/ Itemno.
4001116781957
4001116781964
4001116781971
4001116781988
EAN/ Itemno.
4001116781704
4001116781711
4001116781728
4001116781735
4001116781803
4001116781810
4001116781827
4001116781834
4001116781858
4001116781865
4001116781872
4001116781889
4001116782503
4001116782510
4001116782527
4001116782534
4001116781902
4001116781919
4001116781926
4001116781933
Square tile corner
Square tile corner
36
EDL
EDL
A
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
· Modern appearance
Min. OU: 5 pcs.
Brushed stainless steel
Colour Tile size Dim. a Packaging
A stainless steel 5.8 mm 6.0 mm SS box
A stainless steel 7.8 mm 8.0 mm SS box
A stainless steel 9.8 mm 10.0 mm SS box
A stainless steel 12.3 mm 12.5 mm SS box
Tile edgingsAccessories for square edgings
· Modern appearance
Min. OU: 5 pcs.
Stainless steel, polished
Colour Tile size Dim. a Packaging
A stainless steel 5.8 mm 6.0 mm SS box
A stainless steel 7.8 mm 8.0 mm SS box
A stainless steel 9.8 mm 10.0 mm SS box
A stainless steel 12.3 mm 12.5 mm SS box
EAN/ Itemno.
4001116784255
4001116784262
4001116784279
4001116784286
EAN/ Itemno.
4001116784200
4001116784217
4001116784224
4001116784231
Square tile corner
Square tile corner
37
PVC
PVC
PVC
A
A
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
· As a spacer in the tiling
Min. OU: 5 pcs.
Plastic (hard PVC)
Colour Dim. a Dim. b PU Packaging
A white 5.0 mm 4.0 mm 250 pieces SS bag
Tile edgingsAccessories for tiles
· As a spacer in the tiling
Min. OU: 5 pcs.
Plastic (hard PVC)
Colour Dim. a Dim. b PU Packaging
A white 1.0 mm 3.0 mm 250 pieces SS bag
A white 2.0 mm 3.0 mm 250 pieces SS bag
A white 3.0 mm 4.0 mm 250 pieces SS bag
· As a spacer in the tiling
Min. OU: 5 pcs.
Plastic (hard PVC)
Colour Dim. a Dim. b PU Packaging
A white 4.0 mm 4.5 mm 250 pieces SS bag
EAN/ Itemno.
4001116789847
EAN/ Itemno.
4001116789816
4001116789823
4001116789830
EAN/ Itemno.
4001116789809
Tile wedge
Tile spacer
Tile spacer
38
PVC
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
· As a spacer in the tiling
Min. OU: 5 pcs.
Plastic (hard PVC)
Colour Dim. a Dim. b PU Packaging
A white 2.0 mm 3.0 mm 250 pieces SS bag
A white 3.0 mm 4.0 mm 250 pieces SS bag
Tile edgingsAccessories for tiles
EAN/ Itemno.
4001116789878
4001116789885
Tile T
39
ALU
ALX
A
A B C
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
· alfer®-fix universal punching · Step edge protection
Min. OU: 5 pcs.
Uncoated aluminium
Colour Dim. a Dim. b Dim. c Packaging
A uncoated 8.0 mm 19.5 mm 7.5 mm loose
A uncoated 10.0 mm 19.5 mm 7.5 mm loose
A uncoated 12.5 mm 19.5 mm 7.5 mm loose
Tile edgingsStep edging profiles
· alfer®-fix universal punching · Step edge protection
Min. OU: 5 pcs.
Anodized aluminium
Colour Dim. a Dim. b Dim. c Packaging
A silver 8.0 mm 19.5 mm 7.5 mm loose
A silver 10.0 mm 19.5 mm 7.5 mm loose
A silver 12.5 mm 19.5 mm 7.5 mm loose
B brass 8.0 mm 19.5 mm 7.5 mm loose
B brass 10.0 mm 19.5 mm 7.5 mm loose
B brass 12.5 mm 19.5 mm 7.5 mm loose
C titanium 8.0 mm 19.5 mm 7.5 mm loose
C titanium 10.0 mm 19.5 mm 7.5 mm loose
C titanium 12.5 mm 19.5 mm 7.5 mm loose
length: 1.00m
EAN/Itemno.
4001116725531
4001116725548
4001116725555
4001116725630
4001116725647
4001116725654
4001116727139
4001116727146
4001116727153
length: 2.50m
EAN/Itemno.
4001116725586
4001116725593
4001116725609
4001116725685
4001116725692
4001116725708
4001116727184
4001116727191
4001116727207
length: 1.00m
EAN/Itemno.
4001116725432
4001116725449
4001116725456
length: 2.50m
EAN/Itemno.
4001116725487
4001116725494
4001116725500
Step edging profile “Simple”
Step edging profile “Simple”
40
ALX
ALU
A
A B C
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
Tile edgingsStep edging profiles
· alfer®-fix universal punching · Step edge protection
Min. OU: 5 pcs.
Anodized aluminium
Colour Dim. a Dim. b Dim. c Packaging
A silver 8.0 mm 24.5 mm 7.5 mm loose
A silver 10.0 mm 24.5 mm 7.5 mm loose
A silver 12.5 mm 24.5 mm 7.5 mm loose
B brass 8.0 mm 24.5 mm 7.5 mm loose
B brass 10.0 mm 24.5 mm 7.5 mm loose
B brass 12.5 mm 24.5 mm 7.5 mm loose
C titanium 8.0 mm 24.5 mm 7.5 mm loose
C titanium 10.0 mm 24.5 mm 7.5 mm loose
C titanium 12.5 mm 24.5 mm 7.5 mm loose
· alfer®-fix universal punching · Step edge protection
Min. OU: 5 pcs.
Uncoated aluminium
Colour Dim. a Dim. b Dim. c Packaging
A uncoated 8.0 mm 24.5 mm 7.5 mm loose
A uncoated 10.0 mm 24.5 mm 7.5 mm loose
A uncoated 12.5 mm 24.5 mm 7.5 mm loose
length: 1.00m
EAN/Itemno.
4001116725838
4001116725845
4001116725852
4001116725937
4001116725944
4001116725951
4001116727238
4001116727245
4001116727252
length: 2.50m
EAN/Itemno.
4001116725883
4001116725890
4001116725906
4001116725982
4001116725999
4001116726002
4001116727283
4001116727290
4001116727306
length: 1.00m
EAN/Itemno.
4001116725739
4001116725746
4001116725753
length: 2.50m
EAN/Itemno.
4001116725784
4001116725791
4001116725807
Step edging profile “Florentine”
Step edging profile “Florentine”
41
EHO
EHO
A
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
· alfer®-fix universal punching · Real wood
Min. OU: 5 pcs.
Solid oak, aluminium, untreated
Colour Dim. a Dim. b Dim. c Dim. d Packaging
A oak 27.0 mm 45.0 mm 10.0 mm 20.5 mm loose
· alfer®-fix universal punching · Real wood
Min. OU: 5 pcs.
Solid oak, aluminium, untreated
Colour Dim. a Dim. b Dim. c Dim. d Packaging
A oak 20.0 mm 34.0 mm 10.0 mm 20.5 mm loose
Tile edgingsStep edging profiles
length: 1.00m
EAN/Itemno.
4001116777905
length: 1.30m
EAN/Itemno.
4001116777950
length: 1.00m
EAN/Itemno.
4001116777912
length: 1.30m
EAN/Itemno.
4001116777967
Step edging profile “Real wood”, type 2
Step edging profile “Real wood”, type 1
42
ALX
ALU
ALX
A
A
A B
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
· alfer®-fix universal punching · Step edge protection · Anti-slip insert
Min. OU: 5 pcs.
Anodized aluminium, drilled
Colour Dim. a PVC colour Packaging
A silver 8.0 mm black shrink-wrapped
A silver 11.0 mm black shrink-wrapped
Tile edgingsTile edgings system for steps
· Step edge protection · With glue line
Min. OU: 5 pcs.
Uncoated aluminium, self-adhesive
Colour Dim. a Dim. b Packaging
A uncoated 41.0 mm 23.0 mm shrink-wrapped
· Step edge protection · With glue line
Min. OU: 5 pcs.
Anodized aluminium, self-adhesive
Colour Dim. a Dim. b Packaging
A silver 41.0 mm 23.0 mm shrink-wrapped
B brass 41.0 mm 23.0 mm shrink-wrapped
length: 1.00m
EAN/Itemno.
4001116771118
4001116771125
length: 2.50m
EAN/Itemno.
4001116775116
4001116775123
length: 1.00m
EAN/Itemno.
4001116771101
length: 1.00m
EAN/Itemno.
4001116777103
4001116777196
length: 2.50m
EAN/Itemno.
4001116777509
4001116777592
Complete system set
Standard profile for steps
Standard profile for steps
43
ALP
PVC
ALX
A
A B C
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
· Step edge protection · With glue line
Min. OU: 5 pcs.
Powder-coated aluminium, self-adhesive
Colour Dim. a Dim. b Packaging
A antique white 41.0 mm 23.0 mm shrink-wrapped
Tile edgingsTile edgings system for steps
· Step edge protection · With glue line
Min. OU: 5 pcs.
Plastic (hard PVC) self-adhesive
Colour Dim. a Dim. b Packaging
A grey 41.0 mm 23.0 mm shrink-wrapped
B black 41.0 mm 23.0 mm shrink-wrapped
C brown 41.0 mm 23.0 mm shrink-wrapped
· alfer®-fix universal punching · Step edge protection · With glue line
Min. OU: 5 pcs.
Anodized aluminium
Colour Dim. a Packaging
A silver 8.0 mm shrink-wrapped
length: 1.00m
EAN/Itemno.
4001116777004
length: 1.00m
EAN/Itemno.
4001116771323
4001116771309
4001116771316
length: 1.00m
EAN/Itemno.
4001116771200
Standard profile for steps
Complete standard set
Standard profile for steps
44
PVC
A B
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
· alfer®-fix universal punching · Step edge protection · With glue line
Min. OU: 5 pcs.
Plastic (hard PVC)
Colour Dim. a Packaging
A brown 8.0 mm shrink-wrapped
B grey 8.0 mm shrink-wrapped
Tile edgingsTile edgings system for steps
length: 1.00m
EAN/Itemno.
4001116777011
4001116777028
Complete standard set
45
ALU
ALX
A
A B C D E
F
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
· Press into the fresh silicone
Min. OU: 5 pcs.
Uncoated aluminium
Colour Dim. a Dim. b Packaging
A uncoated 6.0 mm 14.0 mm loose
A uncoated 6.0 mm 25.0 mm loose
Tile edgingsJoint cover profiles and expansion joint profiles
· Press into the fresh silicone
Min. OU: 5 pcs.
Anodized aluminium
Colour Dim. a Dim. b Packaging
A silver 6.0 mm 14.0 mm loose
A silver 6.0 mm 25.0 mm loose
B brass 6.0 mm 14.0 mm loose
B brass 6.0 mm 25.0 mm loose
C bronze 6.0 mm 14.0 mm loose
C bronze 6.0 mm 25.0 mm loose
D champagne 6.0 mm 14.0 mm loose
D champagne 6.0 mm 25.0 mm loose
E titanium 6.0 mm 14.0 mm loose
E titanium 6.0 mm 25.0 mm loose
F chrome look 6.0 mm 14.0 mm shrink-wrapped
F chrome look 6.0 mm 25.0 mm shrink-wrapped
length: 1.00m
EAN/Itemno.
4001116725128
4001116725135
4001116725227
4001116725234
4001116726125
4001116726132
4001116726323
4001116726330
4001116726224
4001116726231
4001116724824
4001116724831
length: 2.50m
EAN/Itemno.
4001116725173
4001116725180
4001116725272
4001116725289
4001116726170
4001116726187
4001116726378
4001116726385
4001116726279
4001116726286
4001116724879
4001116724886
length: 1.00m
EAN/Itemno.
4001116725029
4001116725036
length: 2.50m
EAN/Itemno.
4001116725074
4001116725081
Joint cover profile
Joint cover profile
46
MES
PVC
PVC
A
A B
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
· Press into the fresh silicone
Min. OU: 5 pcs.
Solid brass
Colour Dim. a Dim. b Packaging
A brass 6.0 mm 14.0 mm loose
A brass 6.0 mm 25.0 mm loose
Tile edgingsJoint cover profiles and expansion joint profiles
· alfer®-fix universal punching · With adhesive tape
Min. OU: 5 pcs.
Plastic (hard PVC) with expansion joint in soft PVC
Colour Dim. a Dim. b Dim. c Packaging
A manhattan grey 6.0 mm 8.0 mm 21.0 mm loose
A manhattan grey 8.0 mm 8.0 mm 21.0 mm loose
A manhattan grey 10.0 mm 8.0 mm 21.0 mm loose
A manhattan grey 12.5 mm 8.0 mm 21.0 mm loose
B dark grey 6.0 mm 8.0 mm 21.0 mm loose
B dark grey 8.0 mm 8.0 mm 21.0 mm loose
B dark grey 10.0 mm 8.0 mm 21.0 mm loose
B dark grey 12.5 mm 8.0 mm 21.0 mm loose
Min. OU: 5 pcs.
Plastic (hard PVC) with expansion joint in soft PVC
Colour Dim. a Dim. b Packaging
A dark grey 30.0 mm 8.0 mm loose
length: 2.50m
EAN/Itemno.
4001116766992
length: 1.00m
EAN/Itemno.
4001116767029
4001116767128
4001116767227
4001116767326
4001116767043
4001116767142
4001116767241
4001116767340
length: 2.50m
EAN/Itemno.
4001116769023
4001116769122
4001116769221
4001116769320
4001116769047
4001116769146
4001116769245
4001116769344
length: 1.00m
EAN/Itemno.
4001116725326
4001116725333
length: 2.50m
EAN/Itemno.
4001116725371
4001116725388
Joint cover profile
Expansion joint profile for thick beds
Expansion joint profile
47
ALP
ALX
A
A B C
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
· Press into the fresh silicone
Min. OU: 5 pcs.
Powder-coated aluminium
Colour Dim. a Dim. b Packaging
A brilliant-white 8.0 mm 13.0 mm loose
A brilliant-white 12.0 mm 17.0 mm loose
Tile edgingsJoint cover profiles and expansion joint profiles
· Press into the fresh silicone
Min. OU: 5 pcs.
Anodized aluminium
Colour Dim. a Dim. b Packaging
A silver 8.0 mm 13.0 mm loose
A silver 12.0 mm 17.0 mm loose
B titanium 8.0 mm 13.0 mm loose
B titanium 12.0 mm 17.0 mm loose
C chrome look 8.0 mm 13.0 mm shrink-wrapped
C chrome look 12.0 mm 17.0 mm shrink-wrapped
length: 1.00m
EAN/Itemno.
4001116728013
4001116728211
4001116728051
4001116728259
4001116728068
4001116728266
length: 2.50m
EAN/Itemno.
4001116728112
4001116728310
4001116728150
4001116728358
4001116728167
4001116728365
length: 1.00m
EAN/Itemno.
4001116728075
4001116728273
length: 2.50m
EAN/Itemno.
4001116728174
4001116728372
Edge joint cover profile
Edge joint cover profile
48
PVC
PVC
ABS
A B C D
A
A B
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
Tile edgingsJoint cover profiles and expansion joint profiles | Wet sealing profiles
· alfer®-fix universal punching
Min. OU: 5 pcs.
Plastic (hard PVC)
Colour Dim. a Dim. b Dim. c Packaging
A brilliant-white 8.0 mm 28.0 mm 8.0 mm loose
Min. OU: 5 pcs.
Plastic (hard PVC) with sealing lips (soft PVC)
Colour Dim. a Dim. b Packaging
A white 16.0 mm 4.0 mm loose
B manhattan grey 16.0 mm 4.0 mm loose
· Contents: 2 × external corners, 2 × internal corners, 2 × edgings
Min. OU: 5 pcs.
Plastic (ABS)
Colour Dim. a Packaging
A silver 8.0 mm SS box
A silver 12.0 mm SS box
B chrome look 8.0 mm SS box
B chrome look 12.0 mm SS box
C titanium 8.0 mm SS box
C titanium 12.0 mm SS box
D brilliant-white 8.0 mm SS box
D brilliant-white 12.0 mm SS box
length: 1.83m
EAN/Itemno.
4001116713002
4001116713019
length: 2.50m
EAN/Itemno.
4001116728501
EAN/ Itemno.
4001116729027
4001116729034
4001116729089
4001116729096
4001116729065
4001116729072
4001116729003
4001116729010
Wall connection profile with alfer®-fix
Accessory set for edge joint cover profiles
Wet sealing profile
49
PVC
A
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
Tile edgingsWet sealing profiles
:
· Contents: 2 × self-adhesive wet sealing profiles 2.50 m, 2 × internal corners, 3 × edgings
· With glue line
Min. OU: 5 pcs.
Plastic (hard PVC) with sealing lips (ABS)
Colour Dim. a Dim. b Packaging
A brilliant-white 16.0 mm 4.0 mm shrink-wrapped
length: 2.50m
EAN/Itemno.
4001116713309
Self-adhesive sealing rail set
Min. OU: 5 pcs.
Colour Packaging
A white clap-pac
Adhesive tape for wet sealing profiles
length: 3.66m
EAN/Itemno.
4001116713194
50
A B C
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
clipstech®
Tile edgingsFloor covering height ranges
Cover strip 33/46 mm and wall edging profile
For same height floor coverings
Support Cover
White 6.0 mm 8.0 mm
Ivory 8.5 mm 10.5 mm
Grey 11.0 mm 13.0 mm
Caramel 13.5 mm 15.5 mm
Brown 20.5 mm 22.5 mm
Support profile colour
Floor covering From To
The correct laying method | clipstech®
Cover strip 46 mm
Level compensation from 0.0 mm – 10.0 mm
Support Cover
White 4.0 mm 6.0 mm 6.0 mm 8.0 mm
Ivory 6.5 mm 8.5 mm 8.5 mm 10.5 mm
Grey 9.0 mm 11.0 mm 11.0 mm 13.0 mm
Caramel 11.5 mm 13.5 mm 13.5 mm 15.5 mm
Brown 18.5 mm 20.5 mm 20.5 mm 22.5 mm
Support profile colour
Left floor From To
Right floor From To
White 2.0 mm 4.0 mm 8.0 mm 10.0 mm
Ivory 4.5 mm 6.5 mm 10.5 mm 12.5 mm
Grey 7.0 mm 9.0 mm 13.0 mm 15.0 mm
Caramel 9.5 mm 11.5 mm 15.5 mm 17.5 mm
Brown 16.5 mm 18.5 mm 22.5 mm 24.5 mm
Support profile colour
Left floor From To
Right floor From To
White 0.0 mm 2.0 mm 10.0 mm
Ivory 2.5 mm 4.5 mm 12.5 mm
Grey 5.0 mm 7.0 mm 15.0 mm
Caramel 7.5 mm 9.5 mm 17.5 mm
Brown 14.5 mm 16.5 mm 24.5 mm
Support profile colour
Left floor From To
Right floor
Minimum pivot area
Level compensationfrom 0.0 – 4.0 mm
Maximum pivot area
Level compensationfrom 8.0 – 10.0 mm
Medium pivot area
Level compensationfrom 4.0 – 8.0 mm
51
A B
C D
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
Tile edgingsFloor covering height ranges
clipstech®-vario
Cover strip, level compensator profile and edging profile
Same height coverings and level comp. from 0.0 – 21.0 mm
Ball-head screw
Cover
Ball-head screw 6.0 mm 20.0 mm
SupportFloor covering From To
Cover strip 46 mmLevel compensationup to 10.0 mm
The correct laying method | clipstech®-vario
clipstech® clipstech®-vario
Watch videos of our product and processing tips on YouTube: www.youtube.com/alferaluminium
Useful application videos
52
ALX
PVC
STA
A B C D E
A B C D E
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
· Without interference from screws
Min. OU: 5 pcs.
Anodized aluminium
Colour Dim. a Packaging
A silver 46.0 mm shrink-wrapped
B brass 46.0 mm shrink-wrapped
C bronze 46.0 mm shrink-wrapped
D champagne 46.0 mm shrink-wrapped
E titanium 46.0 mm shrink-wrapped
Tile edgingsclipstech® system profiles
Page 50
· alfer®-fix universal punching
Min. OU: 5 pcs.
Plastic (hard PVC)
Colour Dim. a Dim. b Packaging
A white 8.5 mm 30.0 mm loose
B ivory 11.0 mm 30.0 mm loose
C grey 13.5 mm 30.0 mm loose
D caramel 16.0 mm 30.0 mm loose
E brown 23.0 mm 30.0 mm loose
Page 50
Min. OU: 5 pcs.
Galvanized steel
Colour Screw size Plug size PU Packaging
A galvanized 4,0 mm 6.0 mm Ø 5 pieces each, SS box
Page 51
length: 2.70m
EAN/Itemno.
4001116884108
4001116884115
4001116884122
4001116884191
4001116894107
length: 1.00m
EAN/Itemno.
4001116880100
4001116880117
4001116880124
4001116880193
4001116890109
length: 2.70m
EAN/Itemno.
4001116884009
4001116884016
4001116884047
4001116884023
4001116884030
length: 1.00m
EAN/Itemno.
4001116880001
4001116880018
4001116880049
4001116880025
4001116880032
length: 35.0mm
EAN/Itemno.
4001116882098
clipstech® cover strip
Plug system
clipstech® support profile
53
STA
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
Min. OU: 5 pcs.
Steel
Colour Screw size Plug size PU Packaging
A silver 3,0 mm × 30,0 mm 5.0 mm Ø 10 pieces each, SS box
Tile edgingsclipstech® system profiles
Page 50
EAN/ Itemno.
4001116511257
Countersunk screw with plug
54
ALP
PE
PP
A B C D E
F
A
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
Min. OU: 5 pcs.
Powder-coated aluminium
Colour Dim. a Dim. b Packaging
A brilliant-white 75.0 mm 90.0 mm loose
B manhattan grey 75.0 mm 90.0 mm loose
C dark grey 75.0 mm 90.0 mm loose
D grey-beige 75.0 mm 90.0 mm loose
E fawn brown 75.0 mm 90.0 mm loose
F black brown 75.0 mm 90.0 mm loose
Tile edgingsMats and accessories
· Suitable for drainage
Min. OU: 5 pcs.
Plastic (PE, high density, nonwoven PP)
Colour Dim. a Thickness Packaging
A blue 960.0 mm 10.6 mm loose
· Sealing
Min. OU: 5 pcs.
Plastic (PP, fleeced)
Colour Dim. a Thickness Packaging
A blue 1,000.0 mm 0.5 mm loose
length: 2.50m
EAN/Itemno.
4001116005947
4001116005930
4001116005954
4001116005909
4001116005916
4001116005923
length: 12.50m
EAN/Itemno.
4001116005503
length: 30.00m
EAN/Itemno.
4001116005671
Balcony bracket
Sealing film
Drainage mat
55
PE
PE
PP
A
A
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
· Crack-bridging · Noise insulating
Min. OU: 5 pcs.
Plastic (PE)
Colour Dim. a Thickness Packaging
A white 1,000.0 mm 1.0 mm loose
Tile edgingsMats and accessories
· Sealing · Crack-bridging
Min. OU: 5 pcs.
Plastic (PE, high density, nonwoven PP)
Colour Dim. a Thickness Packaging
A blue 120.0 mm 0.85 mm SS cardboard box
· Sealing
Min. OU: 5 pcs.
Plastic (PP, fleeced)
Colour Dim. a Thickness Packaging
A blue 120.0 mm 0.4 mm loose
length: 10.00m
EAN/Itemno.
4001116005558
length: 30.00m
EAN/Itemno.
4001116005565
length: 25.00m
EAN/Itemno.
4001116005602
Isolation and impact sound insulating mat
Perforated sealing strip
Isolation and sealing mat
56
PP
EPDM
EPDM
A
A
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
· Sealing
Min. OU: 5 pcs.
Plastic (PP, fleeced)
Colour Dim. a Thickness Packaging
A blue 120.0 mm 0.4 mm loose
Tile edgingsMats and accessories
· Sealing
Min. OU: 5 pcs.
Plastic (EPDM with PE fabric)
Colour Dim. a Thickness Packaging
A grey 120.0 mm 0.4 mm loose
· Sealing
Min. OU: 5 pcs.
Plastic (EPDM with PE fabric)
Colour Dim. a Dim. b Thickness PU Packaging
A grey 125.0 mm 162.5 mm 0.8 mm 2 pieces SS box
length: 10.00m
EAN/Itemno.
4001116005695
length: 25.00m
EAN/Itemno.
4001116005626
EAN/ Itemno.
4001116005664
Sealing strip, one side self-adhesive
External angle
Professional sealing tape
57
EPDM
EPDM
A
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
· Sealing
Min. OU: 5 pcs.
Plastic (EPDM with PE fabric)
Colour Dim. a Dim. b Thickness PU Packaging
A grey 60.0 mm 135.0 mm 0.8 mm 2 pieces SS box
Tile edgingsMats and accessories
· Sealing
Min. OU: 5 pcs.
Plastic (EPDM with PE fabric)
Colour Dim. a Dim. b Thickness PU Packaging
A grey 120.0 mm 16.0 mm 0.5 mm 2 pieces SS box
EAN/ Itemno.
4001116005657
EAN/ Itemno.
4001116005640
Internal angle
Wall sleeve
58
STA
STA
STA
A
A
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
Min. OU: 5 pcs.
Galvanized steel sheet
None Dim. a Dim. b Packaging
A type 50 40.0 mm 50.0 mm loose
A type 75 40.0 mm 75.0 mm loose
Tile edgingsDry construction profiles
Min. OU: 5 pcs.
Galvanized steel sheet
None Colour Dim. a Dim. b Dim. c Packaging
A type 50 galvanized 51.0 mm 48.8 mm 48.0 mm loose
A type 75 galvanized 51.0 mm 73.8 mm 48.0 mm loose
Min. OU: 5 pcs.
Galvanized steel sheet
Dim. a Dim. b Packaging
A 48.0 mm 15.5 mm loose
length: 2.60m
EAN/Itemno.
4001116799624
4001116799631
length: 2.60m
EAN/Itemno.
4001116799648
4001116799655
length: 2.30m
EAN/Itemno.
4001116799662
U-profile for wall
Dry construction profile
Maxi wall C-profile
59
ALU
PVC
A
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
Min. OU: 5 pcs.
Uncoated aluminium
Colour Dim. a Dim. b Dim. c Packaging
A uncoated 25.0 mm 1.0 mm 4.0 mm loose
Tile edgingsDry construction profiles
Min. OU: 5 pcs.
Plastic (hard PVC)
Colour Dim. a Dim. b Dim. c Packaging
A white 20.0 mm 1.0 mm 2.0 mm loose
length: 2.50m
EAN/Itemno.
4001116799600
length: 2.60m
EAN/Itemno.
4001116799815
Corner bead
Wall covering corner bar
60
STA
STA
STA
A
A
A
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
Min. OU: 5 pcs.
Galvanized steel sheet
Plaster thickness Colour PVC colour Dim. a Dim. b Dim. c Packaging
A 14.0 mm galvanized white 41.0 mm 14.0 mm 8.5 mm loose
Tile edgingsPlastering profiles
Min. OU: 5 pcs.
Galvanized steel sheet
Plaster thickness Colour Dim. a Dim. b Packaging
A 6.0 mm galvanized 21.0 mm 6.0 mm loose
A 10.0 mm galvanized 24.0 mm 10.0 mm loose
A 12.0 mm galvanized 21.0 mm 12.0 mm loose
Min. OU: 5 pcs.
Galvanized steel sheet
Plaster thickness Colour Dim. a Dim. b Dim. c Packaging
A 12.0 mm galvanized 34.0 mm 12.0 mm 7.5 mm loose
length: 2.50m
EAN/Itemno.
4001116799204
length: 2.50m
EAN/Itemno.
4001116799457
4001116799440
4001116799419
length: 2.50m
EAN/Itemno.
4001116799402
Corner bead
Corner bead
Depth gauge beads
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
IND-1
Tile edgingsIndex
alfer® makes you mobile
Start browsing and get enjoying! The complete product catalogue can also be downloaded in PDF format from our website www.alfer.com, where you will also find many other use-ful services and suggestions in relation to the fascinating alfer® product world. For example, look forward to plenty of practical tips and tricks for existing and budding DIY enthusiasts. Get inspiration from our refined building ide-as. Use our comprehensive download area to obtain catalogues, brochures and building instructions. And make sure you take a look at our helpful application and product videos. They are well worth watching!
We look forward to your visit to www.alfer.com
Information about alfer® and the full product range plus plenty of other useful information can be found online. Our website is also optimised for mobile devices and tablets. Wherever you are, you can find what you are you looking for – quickly and clearly.
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
IND-2
alfer® ranges
Tile edgingsIndex
combitech® system | BasisEverything fits together:The combitech® system: flexibly combinable. One product highlight is the typical drill alignment groove – just one of many practical ideas from alfer®. For example, this marks the opposite sides of a round-ed pipe making vertical drilling through the middle easy. The Basis range from combitech® comprises standard aluminium and plastic profiles such as pipes, brackets, square tubes and much, much more.
combitech® system | connect 23.5 mmThe combitech® connect connectors can be used to simply connect 23.5 mm square tubes. Whether frames, shelves or anything else you wish to build, the stable polyamide connectors hold everything to-gether. The connectors are available in two colours: black and white.
combitech® system | Sheets, plates and accessories A huge selection of sheets provides the right product for many applications. The alfer® sheets come in many different thicknesses and materials. Multiple different finish options are also available from functional to decorative.
Prismatech and Multitube: The profiles for framing and stabilising the sheets are particularly practical. alfer® offers clever options to this end through Prismatech and Multitube.
combitech® system | logika®
logika® is a new addition to the combitech® systems in the form of a logically perforated profile. logika® profiles enable you to build shelves, tables, steps, and much more. This will enable you to create order in rooms or vehicles. The holes in the profiles are made in such a way that they are as small as possible but as big as necessary to ensure high stability and so that, for example, at least three brackets will fit on top of each other and a further bracket can be screwed in place vertically to the others. The profiles are particularly suited for use in cold-storage rooms, cellars and wet areas.
Profiles for DIY and professional purposes Flat bars, brackets with even and uneven branches, U-profiles, round bars, rectangular tubes and a whole range of other profiles. These form the basis for you to turn your ideas into reality. The classic semi-finishedproducts for DIY enthusiasts and professionals are made from aluminium with anodised or untreated finishes, as well as many other materials.
Steel profilesSteel is the most commonly used metallic material and offers an array of impressive benefits: high tensile strength, good malleability and thermal conductivity. The noteworthy material strength and rigidity ensure optimum stability. Furthermore, steel is extremely easy to work and resource-conserving as it can be re-cycled without any loss of quality. alfer® steel profiles are available as flat, angle, U, T, round and square profiles and tubes as well as in the form of sectional steel and wide-flanged beams.
combitech® system | Model construction alfer® has a special place in its heart for model builders. Model builders can therefore also acquire combitech® connect connectors for 7.5 mm profiles. Numerous special shapes such as the 150° angle connector are also available. The popular benefits such as the drill alignment groove and the easy-to-combine dimensions also prove their worth in the model construction range.
Discover the full diversity of the model construction range in the online shop: www.alfer-shop.com
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
IND-3
alfer® ranges
Tile edgingsIndex
Tile edgingsClean edges and finishes with aluminium profiles.Whether you lay your tiles yourself or have them laid by a specialist, there is one important ‘side issue’ that you should never forget. The alfer® profiles can be used on corners and edges, transitions between floor coverings and stairways. Clean edges and transitions not only look good but are also hygienic as they prevent any fraying or scuffing and improve water-resistance.
Floor and room profiles Transitions between different floor coverings, a clean and protective edging or stair edges, all available in a whole range of colours, materials and décors. The stair profiles provide safety and particularly protect textile coverings against scuffing on the edges, ensuring they retain their visual appeal for many years. The profiles are extremely colour stable and completely crush-proof. For minor damage to aged stairs, alfer® offers stair repair brackets for simple restoration. alfer® door sealing brushes simply and effec-tively prevent drafts.
Profiles for parquet, laminate and designer floorsPerfectly laid parquet and laminate floorboards the easy wayThe ease of laying ready-to-install parquet, cork and laminate floorboards makes them extremely popular with DIY enthusiasts. And anyone who appre-ciates this feature will love the parquet and laminate profiles from alfer®. With clipstech®, clipstech®-var-io and clipstech®-plus, you have the perfect profiles for edges and transitions between floor coverings. The edges are therefore cleanly sealed and stumbling hazards are prevented. The clipstech® profiles are installed so that no screws are subsequently visible. The cover is simply clipped on.
cabelino® baseboards Baseboards are ideal for concealing retrospectively laid cables and lines. The cabelino® baseboards have been designed for precisely this purpose. The baseboards are TÜV-certified and comply with the latest safety regulations. The décors of the baseboards match those of the clipstech® range. cabelino® baseboards are also noteworthy from a technical perspective. Thanks to the lock or clamp gap, they can be infinitely adjusted by up to 10 mm so that the baseboard can simply be pressed down if the floor set-tles over the years.
combitech® system | coaxis®
A further addition to the combitech® system is the coaxis® profile. This consists of four hollow chambers coaxially located around the core. The special design of the aluminium profiles ensure excellent longitu-dinal and lateral stability with the lowest weight. Equipped with drill alignment holes, the profiles are ex-tremely simple to use and the angle bracket and hook can even be installed without drilling, using simply a square nut and screw. The profiles are ideal for use in damp areas and can even be used in the garden thanks to their weather-resistance.
Storage range The broad version of the coaxis® profile can be horizontally, vertically and diagonally attached to walls and ceilings, allowing you to make optimal use of the available space. With the right hook, everything finds a place, whether indoors or out. Whether in the garden, the garage, the cellar or the attic: everything can be securely stored. The rubber caps on the hooks ensure that nothing gets scratched. The coaxis® hooks are available in aluminium or galvanised steel. The alfer® bicycle stand is made of lightweight, weather-re-sistant aluminium. It is suitable for all bikes, from racing bikes and city bikes to mountain bikes. It comes either as a rigid or an infinitely adjustable version, individually or as a three-piece set.
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
IND-4
Tile edgingsIndex
Product names A–Z
Accessory set for edge joint cover profiles .......................................................................48Angle profile ................................................................................................. 16 | 17 | 18 | 19Angle profile, pliable..........................................................................................................20Balcony bracket ................................................................................................................54clipstech® cover strip ......................................................................................................52clipstech® support profile ................................................................................................52Complete standard set ..............................................................................................43 | 44Complete system set ........................................................................................................42Corner bead ...............................................................................................................59 | 60Countersunk screw with plug ...........................................................................................53Depth gauge beads...........................................................................................................60Drainage mat .....................................................................................................................54Dry construction profile .....................................................................................................58Edge joint cover profile .....................................................................................................47Expansion joint profile .......................................................................................................46Expansion joint profile for thick beds................................................................................46External angle ...................................................................................................................56Internal angle.....................................................................................................................57Isolation and impact sound insulating mat .......................................................................55Isolation and sealing mat ..................................................................................................55Joint cover profile ......................................................................................................45 | 46Maxi wall C-profile ............................................................................................................58Perforated sealing strip .....................................................................................................55Plug system ......................................................................................................................52Professional sealing tape ..................................................................................................56Quarter circle external corner ............................................................................. 26 | 27 | 28Quarter circle internal corner .............................................................................. 29 | 30 | 31Quarter circle profile ..............................................................................21 | 22 | 23 | 24 | 25Sealing film ........................................................................................................................54Sealing strip, one side self-adhesive ................................................................................56Self-adhesive sealing rail set ............................................................................................49Square edging ............................................................................................................33 | 34Square tile corner .......................................................................................................35 | 36Standard profile for steps ..........................................................................................42 | 43Step edging profile “Florentine” ........................................................................................40Step edging profile “Real wood”, type 1 ..........................................................................41Step edging profile “Real wood”, type 2 ..........................................................................41Step edging profile “Simple”.............................................................................................39Tile spacer .........................................................................................................................37Tile T..................................................................................................................................38Tile wedge .........................................................................................................................37U-profile for wall ................................................................................................................58Wall connection profile with alfer®-fix ..............................................................................48Wall covering corner bar ...................................................................................................59Wall sleeve ........................................................................................................................57Wet sealing profile ............................................................................................................48
Item number summary
00550 Drainage mat .........................................................................................................5400555 Isolation and impact sound insulating mat ...........................................................5500556 Isolation and sealing mat ......................................................................................5500560 Perforated sealing strip .........................................................................................5500562 Professional sealing tape ......................................................................................5600564 Wall sleeve ............................................................................................................5700565 Internal angle .........................................................................................................5700566 External angle .......................................................................................................5600567 Sealing film ............................................................................................................5400569 Sealing strip, one side self-adhesive ....................................................................5600590 Balcony bracket ....................................................................................................5400591 Balcony bracket ....................................................................................................5400592 Balcony bracket ....................................................................................................5400593 Balcony bracket ....................................................................................................5400594 Balcony bracket ....................................................................................................5400595 Balcony bracket ....................................................................................................5400600 Angle profile ..........................................................................................................1600601 Angle profile ..........................................................................................................1600602 Angle profile ..........................................................................................................1600603 Angle profile ..........................................................................................................1600604 Angle profile ..........................................................................................................1600608 Angle profile ..........................................................................................................1600609 Angle profile ..........................................................................................................1601600 Angle profile ..........................................................................................................1601601 Angle profile ..........................................................................................................1601602 Angle profile ..........................................................................................................1601603 Angle profile ..........................................................................................................1601604 Angle profile ..........................................................................................................1601608 Angle profile ..........................................................................................................1601610 Angle profile ..........................................................................................................1601611 Angle profile ..........................................................................................................1601612 Angle profile ..........................................................................................................1601613 Angle profile ..........................................................................................................1601614 Angle profile ..........................................................................................................1601618 Angle profile ..........................................................................................................1602600 Angle profile ..........................................................................................................1602601 Angle profile ..........................................................................................................1602602 Angle profile ..........................................................................................................1602603 Angle profile ..........................................................................................................1602604 Angle profile ..........................................................................................................1602608 Angle profile ..........................................................................................................1603600 Angle profile ..........................................................................................................1603601 Angle profile ..........................................................................................................1603602 Angle profile ..........................................................................................................1603603 Angle profile ..........................................................................................................1603604 Angle profile ..........................................................................................................1603630 Angle profile ..........................................................................................................1703631 Angle profile ..........................................................................................................1703632 Angle profile ..........................................................................................................1703633 Angle profile ..........................................................................................................1703634 Angle profile ..........................................................................................................1703640 Angle profile ..........................................................................................................1703641 Angle profile ..........................................................................................................1703642 Angle profile ..........................................................................................................1703643 Angle profile ..........................................................................................................1703644 Angle profile ..........................................................................................................1720610 Angle profile ..........................................................................................................1720611 Angle profile ..........................................................................................................1720612 Angle profile ..........................................................................................................1720613 Angle profile ..........................................................................................................1720614 Angle profile ..........................................................................................................1751125 Countersunk screw with plug ...............................................................................5370060 Angle profile ..........................................................................................................1770061 Angle profile ..........................................................................................................1770062 Angle profile ..........................................................................................................1770063 Angle profile ..........................................................................................................1770064 Angle profile ..........................................................................................................1770082 Angle profile ..........................................................................................................1870083 Angle profile ..........................................................................................................1870084 Angle profile ..........................................................................................................1870085 Angle profile ..........................................................................................................1870086 Angle profile ..........................................................................................................1870092 Angle profile ..........................................................................................................1870093 Angle profile ..........................................................................................................1870094 Angle profile ..........................................................................................................1870095 Angle profile ..........................................................................................................1870096 Angle profile ..........................................................................................................1870102 Angle profile ..........................................................................................................1970103 Angle profile ..........................................................................................................1970104 Angle profile ..........................................................................................................1970105 Angle profile ..........................................................................................................1970106 Angle profile ..........................................................................................................1970112 Quarter circle profile ..............................................................................................2370113 Quarter circle profile ..............................................................................................2370114 Quarter circle profile ..............................................................................................2370115 Quarter circle profile ..............................................................................................2370122 Quarter circle profile ..............................................................................................2370123 Quarter circle profile ..............................................................................................23
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
IND-5
Tile edgingsIndex
Item number summary
70124 Quarter circle profile ..............................................................................................2370125 Quarter circle profile ..............................................................................................2370132 Square edging .......................................................................................................3470133 Square edging .......................................................................................................3470134 Square edging .......................................................................................................3470135 Square edging .......................................................................................................3470142 Square edging .......................................................................................................3470143 Square edging .......................................................................................................3470144 Square edging .......................................................................................................3470145 Square edging .......................................................................................................3470201 Angle profile ..........................................................................................................1670202 Angle profile ..........................................................................................................1670203 Angle profile ..........................................................................................................1670204 Angle profile ..........................................................................................................1670205 Angle profile ..........................................................................................................1670206 Angle profile ..........................................................................................................1670207 Angle profile ..........................................................................................................1670208 Angle profile ..........................................................................................................1670209 Angle profile ..........................................................................................................1670210 Angle profile ..........................................................................................................1670211 Angle profile ..........................................................................................................1670212 Angle profile ..........................................................................................................1670213 Angle profile ..........................................................................................................1670215 Angle profile ..........................................................................................................1670216 Angle profile ..........................................................................................................1670217 Angle profile ..........................................................................................................1670218 Angle profile ..........................................................................................................1670219 Angle profile ..........................................................................................................1670220 Angle profile ..........................................................................................................1670222 Angle profile ..........................................................................................................1670223 Angle profile ..........................................................................................................1670224 Angle profile ..........................................................................................................1670225 Angle profile ..........................................................................................................1670226 Angle profile ..........................................................................................................1670236 Angle profile ..........................................................................................................1770237 Angle profile ..........................................................................................................1770238 Angle profile ..........................................................................................................1770239 Angle profile ..........................................................................................................1770240 Angle profile ..........................................................................................................1770243 Angle profile ..........................................................................................................1770244 Angle profile ..........................................................................................................1770245 Angle profile ..........................................................................................................1770246 Angle profile ..........................................................................................................1770247 Angle profile ..........................................................................................................1770260 Angle profile ..........................................................................................................1770261 Angle profile ..........................................................................................................1770262 Angle profile ..........................................................................................................1770263 Angle profile ..........................................................................................................1770264 Angle profile ..........................................................................................................1770270 Angle profile ..........................................................................................................1670271 Angle profile ..........................................................................................................1670272 Angle profile ..........................................................................................................1670273 Angle profile ..........................................................................................................1670274 Angle profile ..........................................................................................................1670275 Angle profile ..........................................................................................................1670282 Angle profile ..........................................................................................................1870283 Angle profile ..........................................................................................................1870284 Angle profile ..........................................................................................................1870285 Angle profile ..........................................................................................................1870286 Angle profile ..........................................................................................................1870292 Angle profile ..........................................................................................................1770293 Angle profile ..........................................................................................................1770294 Angle profile ..........................................................................................................1770295 Angle profile ..........................................................................................................1770296 Angle profile ..........................................................................................................1770302 Angle profile ..........................................................................................................1870303 Angle profile ..........................................................................................................1870304 Angle profile ..........................................................................................................1870305 Angle profile ..........................................................................................................1870306 Angle profile ..........................................................................................................1870312 Angle profile ..........................................................................................................1970313 Angle profile ..........................................................................................................1970314 Angle profile ..........................................................................................................1970315 Angle profile ..........................................................................................................1970316 Angle profile ..........................................................................................................1970322 Quarter circle profile ..............................................................................................2370323 Quarter circle profile ..............................................................................................2370324 Quarter circle profile ..............................................................................................2370325 Quarter circle profile ..............................................................................................2370332 Quarter circle profile ..............................................................................................2370333 Quarter circle profile ..............................................................................................2370334 Quarter circle profile ..............................................................................................2370335 Quarter circle profile ..............................................................................................2370342 Square edging .......................................................................................................3470343 Square edging .......................................................................................................3470344 Square edging .......................................................................................................3470345 Square edging .......................................................................................................3470352 Square edging .......................................................................................................34
70353 Square edging .......................................................................................................3470354 Square edging .......................................................................................................3470355 Square edging .......................................................................................................3470415 Angle profile ..........................................................................................................1970416 Angle profile ..........................................................................................................1970417 Angle profile ..........................................................................................................1970418 Angle profile ..........................................................................................................1970464 Angle profile ..........................................................................................................1970465 Angle profile ..........................................................................................................1970466 Angle profile ..........................................................................................................1970467 Angle profile ..........................................................................................................1970485 Angle profile ..........................................................................................................1970486 Angle profile ..........................................................................................................1970487 Angle profile ..........................................................................................................1970488 Angle profile ..........................................................................................................1970492 Angle profile ..........................................................................................................1970493 Angle profile ..........................................................................................................1970494 Angle profile ..........................................................................................................1970495 Angle profile ..........................................................................................................1970601 Angle profile ..........................................................................................................1970602 Angle profile ..........................................................................................................1970603 Angle profile ..........................................................................................................1970604 Angle profile ..........................................................................................................1970615 Angle profile ..........................................................................................................1970616 Angle profile ..........................................................................................................1970617 Angle profile ..........................................................................................................1970618 Angle profile ..........................................................................................................1970664 Angle profile ..........................................................................................................1970665 Angle profile ..........................................................................................................1970666 Angle profile ..........................................................................................................1970667 Angle profile ..........................................................................................................1970685 Angle profile ..........................................................................................................1970686 Angle profile ..........................................................................................................1970687 Angle profile ..........................................................................................................1970688 Angle profile ..........................................................................................................1970692 Angle profile ..........................................................................................................1970693 Angle profile ..........................................................................................................1970694 Angle profile ..........................................................................................................1970695 Angle profile ..........................................................................................................1970845 Quarter circle profile ..............................................................................................2370847 Quarter circle profile ..............................................................................................2370848 Quarter circle profile ..............................................................................................2371013 Quarter circle profile ..............................................................................................2371015 Quarter circle profile ..............................................................................................2371016 Quarter circle profile ..............................................................................................2371300 Wet sealing profile.................................................................................................4871301 Wet sealing profile.................................................................................................4871319 Adhesive tape for wet sealing profiles ..................................................................4971330 Self-adhesive sealing rail set.................................................................................4971508 Quarter circle profile ..............................................................................................2371548 Quarter circle profile ..............................................................................................2372002 Quarter circle profile ..............................................................................................2472003 Quarter circle profile ..............................................................................................2472004 Quarter circle profile ..............................................................................................2472005 Quarter circle profile ..............................................................................................2472007 Quarter circle profile ..............................................................................................2472008 Quarter circle profile ..............................................................................................2472009 Quarter circle profile ..............................................................................................2472010 Quarter circle profile ..............................................................................................2472012 Quarter circle profile ..............................................................................................2472013 Quarter circle profile ..............................................................................................2472014 Quarter circle profile ..............................................................................................2472015 Quarter circle profile ..............................................................................................2472017 Quarter circle profile ..............................................................................................2472018 Quarter circle profile ..............................................................................................2472019 Quarter circle profile ..............................................................................................2472020 Quarter circle profile ..............................................................................................2472022 Quarter circle profile ..............................................................................................2472023 Quarter circle profile ..............................................................................................2472024 Quarter circle profile ..............................................................................................2472025 Quarter circle profile ..............................................................................................2472027 Quarter circle profile ..............................................................................................2472028 Quarter circle profile ..............................................................................................2472029 Quarter circle profile ..............................................................................................2472030 Quarter circle profile ..............................................................................................2472032 Quarter circle profile ..............................................................................................2472033 Quarter circle profile ..............................................................................................2472034 Quarter circle profile ..............................................................................................2472035 Quarter circle profile ..............................................................................................2472037 Quarter circle profile ..............................................................................................2472038 Quarter circle profile ..............................................................................................2472039 Quarter circle profile ..............................................................................................2472040 Quarter circle profile ..............................................................................................2472042 Quarter circle profile ..............................................................................................2472043 Quarter circle profile ..............................................................................................2472044 Quarter circle profile ..............................................................................................2472045 Quarter circle profile ..............................................................................................2472047 Quarter circle profile ..............................................................................................24
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
IND-6
Tile edgingsIndex
72249 Quarter circle profile ..............................................................................................2172250 Quarter circle profile ..............................................................................................2172251 Quarter circle profile ..............................................................................................2172252 Quarter circle profile ..............................................................................................2272253 Quarter circle profile ..............................................................................................2272254 Quarter circle profile ..............................................................................................2272255 Quarter circle profile ..............................................................................................2272256 Quarter circle profile ..............................................................................................2272257 Quarter circle profile ..............................................................................................2272258 Quarter circle profile ..............................................................................................2272259 Quarter circle profile ..............................................................................................2272260 Quarter circle profile ..............................................................................................2272261 Quarter circle profile ..............................................................................................2272262 Quarter circle profile ..............................................................................................2272263 Quarter circle profile ..............................................................................................2272264 Quarter circle profile ..............................................................................................2272265 Quarter circle profile ..............................................................................................2272266 Quarter circle profile ..............................................................................................2272267 Quarter circle profile ..............................................................................................2272268 Quarter circle profile ..............................................................................................2272269 Quarter circle profile ..............................................................................................2272270 Quarter circle profile ..............................................................................................2272271 Quarter circle profile ..............................................................................................2272282 Quarter circle profile ..............................................................................................2272283 Quarter circle profile ..............................................................................................2272284 Quarter circle profile ..............................................................................................2272285 Quarter circle profile ..............................................................................................2272286 Quarter circle profile ..............................................................................................2272287 Quarter circle profile ..............................................................................................2272288 Quarter circle profile ..............................................................................................2272289 Quarter circle profile ..............................................................................................2272290 Quarter circle profile ..............................................................................................2272291 Quarter circle profile ..............................................................................................2272292 Quarter circle profile ..............................................................................................2272293 Quarter circle profile ..............................................................................................2272294 Quarter circle profile ..............................................................................................2272295 Quarter circle profile ..............................................................................................2272296 Quarter circle profile ..............................................................................................2272297 Quarter circle profile ..............................................................................................2272298 Quarter circle profile ..............................................................................................2272299 Quarter circle profile ..............................................................................................2272300 Quarter circle profile ..............................................................................................2272301 Quarter circle profile ..............................................................................................2272307 Quarter circle profile ..............................................................................................2172308 Quarter circle profile ..............................................................................................2172309 Quarter circle profile ..............................................................................................2172310 Quarter circle profile ..............................................................................................2172312 Quarter circle profile ..............................................................................................2172313 Quarter circle profile ..............................................................................................2172314 Quarter circle profile ..............................................................................................2172315 Quarter circle profile ..............................................................................................2172316 Quarter circle profile ..............................................................................................2172317 Quarter circle profile ..............................................................................................2172318 Quarter circle profile ..............................................................................................2172319 Quarter circle profile ..............................................................................................2172320 Quarter circle profile ..............................................................................................2172321 Quarter circle profile ..............................................................................................2172322 Quarter circle profile ..............................................................................................2172323 Quarter circle profile ..............................................................................................2172324 Quarter circle profile ..............................................................................................2172325 Quarter circle profile ..............................................................................................2172326 Quarter circle profile ..............................................................................................2172327 Quarter circle profile ..............................................................................................2172328 Quarter circle profile ..............................................................................................2172329 Quarter circle profile ..............................................................................................2172330 Quarter circle profile ..............................................................................................2172331 Quarter circle profile ..............................................................................................2172332 Quarter circle profile ..............................................................................................2172333 Quarter circle profile ..............................................................................................2172334 Quarter circle profile ..............................................................................................2172335 Quarter circle profile ..............................................................................................2172336 Quarter circle profile ..............................................................................................2172337 Quarter circle profile ..............................................................................................2172338 Quarter circle profile ..............................................................................................2172339 Quarter circle profile ..............................................................................................2172340 Quarter circle profile ..............................................................................................2172341 Quarter circle profile ..............................................................................................2172482 Joint cover profile .................................................................................................4572483 Joint cover profile .................................................................................................4572487 Joint cover profile .................................................................................................4572488 Joint cover profile .................................................................................................4572502 Joint cover profile .................................................................................................4572503 Joint cover profile .................................................................................................4572507 Joint cover profile .................................................................................................4572508 Joint cover profile .................................................................................................4572512 Joint cover profile .................................................................................................4572513 Joint cover profile .................................................................................................4572517 Joint cover profile .................................................................................................45
72048 Quarter circle profile ..............................................................................................2472049 Quarter circle profile ..............................................................................................2472050 Quarter circle profile ..............................................................................................2472052 Quarter circle profile ..............................................................................................2572053 Quarter circle profile ..............................................................................................2572054 Quarter circle profile ..............................................................................................2572055 Quarter circle profile ..............................................................................................2572057 Quarter circle profile ..............................................................................................2572058 Quarter circle profile ..............................................................................................2572059 Quarter circle profile ..............................................................................................2572060 Quarter circle profile ..............................................................................................2572062 Quarter circle profile ..............................................................................................2572063 Quarter circle profile ..............................................................................................2572064 Quarter circle profile ..............................................................................................2572065 Quarter circle profile ..............................................................................................2572067 Quarter circle profile ..............................................................................................2572068 Quarter circle profile ..............................................................................................2572069 Quarter circle profile ..............................................................................................2572070 Quarter circle profile ..............................................................................................2572072 Quarter circle profile ..............................................................................................2572073 Quarter circle profile ..............................................................................................2572074 Quarter circle profile ..............................................................................................2572075 Quarter circle profile ..............................................................................................2572077 Quarter circle profile ..............................................................................................2572078 Quarter circle profile ..............................................................................................2572079 Quarter circle profile ..............................................................................................2572080 Quarter circle profile ..............................................................................................2572082 Quarter circle profile ..............................................................................................2572083 Quarter circle profile ..............................................................................................2572084 Quarter circle profile ..............................................................................................2572085 Quarter circle profile ..............................................................................................2572087 Quarter circle profile ..............................................................................................2572088 Quarter circle profile ..............................................................................................2572089 Quarter circle profile ..............................................................................................2572090 Quarter circle profile ..............................................................................................2572092 Quarter circle profile ..............................................................................................2472093 Quarter circle profile ..............................................................................................2472094 Quarter circle profile ..............................................................................................2472095 Quarter circle profile ..............................................................................................2472097 Quarter circle profile ..............................................................................................2472098 Quarter circle profile ..............................................................................................2472099 Quarter circle profile ..............................................................................................2472100 Quarter circle profile ..............................................................................................2472102 Quarter circle profile ..............................................................................................2472103 Quarter circle profile ..............................................................................................2472104 Quarter circle profile ..............................................................................................2472105 Quarter circle profile ..............................................................................................2472107 Quarter circle profile ..............................................................................................2472108 Quarter circle profile ..............................................................................................2472109 Quarter circle profile ..............................................................................................2472110 Quarter circle profile ..............................................................................................2472202 Quarter circle profile ..............................................................................................2172203 Quarter circle profile ..............................................................................................2172204 Quarter circle profile ..............................................................................................2172205 Quarter circle profile ..............................................................................................2172206 Quarter circle profile ..............................................................................................2172207 Quarter circle profile ..............................................................................................2172208 Quarter circle profile ..............................................................................................2172209 Quarter circle profile ..............................................................................................2172210 Quarter circle profile ..............................................................................................2172211 Quarter circle profile ..............................................................................................2172212 Quarter circle profile ..............................................................................................2172213 Quarter circle profile ..............................................................................................2172214 Quarter circle profile ..............................................................................................2172215 Quarter circle profile ..............................................................................................2172216 Quarter circle profile ..............................................................................................2172217 Quarter circle profile ..............................................................................................2172218 Quarter circle profile ..............................................................................................2172219 Quarter circle profile ..............................................................................................2172220 Quarter circle profile ..............................................................................................2172221 Quarter circle profile ..............................................................................................2172222 Quarter circle profile ..............................................................................................2172223 Quarter circle profile ..............................................................................................2172224 Quarter circle profile ..............................................................................................2172225 Quarter circle profile ..............................................................................................2172226 Quarter circle profile ..............................................................................................2172227 Quarter circle profile ..............................................................................................2172228 Quarter circle profile ..............................................................................................2172229 Quarter circle profile ..............................................................................................2172230 Quarter circle profile ..............................................................................................2172231 Quarter circle profile ..............................................................................................2172242 Quarter circle profile ..............................................................................................2172243 Quarter circle profile ..............................................................................................2172244 Quarter circle profile ..............................................................................................2172245 Quarter circle profile ..............................................................................................2172246 Quarter circle profile ..............................................................................................2172247 Quarter circle profile ..............................................................................................2172248 Quarter circle profile ..............................................................................................21
Item number summary
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
IND-7
Tile edgingsIndex
72518 Joint cover profile .................................................................................................4572522 Joint cover profile .................................................................................................4572523 Joint cover profile .................................................................................................4572527 Joint cover profile .................................................................................................4572528 Joint cover profile .................................................................................................4572532 Joint cover profile .................................................................................................4672533 Joint cover profile .................................................................................................4672537 Joint cover profile .................................................................................................4672538 Joint cover profile .................................................................................................4672543 Step edging profile “Simple” .................................................................................3972544 Step edging profile “Simple” .................................................................................3972545 Step edging profile “Simple” .................................................................................3972548 Step edging profile “Simple” .................................................................................3972549 Step edging profile “Simple” .................................................................................3972550 Step edging profile “Simple” .................................................................................3972553 Step edging profile “Simple” .................................................................................3972554 Step edging profile “Simple” .................................................................................3972555 Step edging profile “Simple” .................................................................................3972558 Step edging profile “Simple” .................................................................................3972559 Step edging profile “Simple” .................................................................................3972560 Step edging profile “Simple” .................................................................................3972563 Step edging profile “Simple” .................................................................................3972564 Step edging profile “Simple” .................................................................................3972565 Step edging profile “Simple” .................................................................................3972568 Step edging profile “Simple” .................................................................................3972569 Step edging profile “Simple” .................................................................................3972570 Step edging profile “Simple” .................................................................................3972573 Step edging profile “Florentine” ............................................................................4072574 Step edging profile “Florentine” ............................................................................4072575 Step edging profile “Florentine” ............................................................................4072578 Step edging profile “Florentine” ............................................................................4072579 Step edging profile “Florentine” ............................................................................4072580 Step edging profile “Florentine” ............................................................................4072583 Step edging profile “Florentine” ............................................................................4072584 Step edging profile “Florentine” ............................................................................4072585 Step edging profile “Florentine” ............................................................................4072588 Step edging profile “Florentine” ............................................................................4072589 Step edging profile “Florentine” ............................................................................4072590 Step edging profile “Florentine” ............................................................................4072593 Step edging profile “Florentine” ............................................................................4072594 Step edging profile “Florentine” ............................................................................4072595 Step edging profile “Florentine” ............................................................................4072598 Step edging profile “Florentine” ............................................................................4072599 Step edging profile “Florentine” ............................................................................4072600 Step edging profile “Florentine” ............................................................................4072612 Joint cover profile .................................................................................................4572613 Joint cover profile .................................................................................................4572617 Joint cover profile .................................................................................................4572618 Joint cover profile .................................................................................................4572622 Joint cover profile .................................................................................................4572623 Joint cover profile .................................................................................................4572627 Joint cover profile .................................................................................................4572628 Joint cover profile .................................................................................................4572632 Joint cover profile .................................................................................................4572633 Joint cover profile .................................................................................................4572637 Joint cover profile .................................................................................................4572638 Joint cover profile .................................................................................................4572713 Step edging profile “Simple” .................................................................................3972714 Step edging profile “Simple” .................................................................................3972715 Step edging profile “Simple” .................................................................................3972718 Step edging profile “Simple” .................................................................................3972719 Step edging profile “Simple” .................................................................................3972720 Step edging profile “Simple” .................................................................................3972723 Step edging profile “Florentine” ............................................................................4072724 Step edging profile “Florentine” ............................................................................4072725 Step edging profile “Florentine” ............................................................................4072728 Step edging profile “Florentine” ............................................................................4072729 Step edging profile “Florentine” ............................................................................4072730 Step edging profile “Florentine” ............................................................................4072801 Edge joint cover profile .........................................................................................4772805 Edge joint cover profile .........................................................................................4772806 Edge joint cover profile .........................................................................................4772807 Edge joint cover profile .........................................................................................4772811 Edge joint cover profile .........................................................................................4772815 Edge joint cover profile .........................................................................................4772816 Edge joint cover profile .........................................................................................4772817 Edge joint cover profile .........................................................................................4772821 Edge joint cover profile .........................................................................................4772825 Edge joint cover profile .........................................................................................4772826 Edge joint cover profile .........................................................................................4772827 Edge joint cover profile .........................................................................................4772831 Edge joint cover profile .........................................................................................4772835 Edge joint cover profile .........................................................................................4772836 Edge joint cover profile .........................................................................................4772837 Edge joint cover profile .........................................................................................4772850 Wall connection profile with alfer®-fix ..................................................................4872900 Accessory set for edge joint cover profiles ...........................................................4872901 Accessory set for edge joint cover profiles ...........................................................48
72902 Accessory set for edge joint cover profiles ...........................................................4872903 Accessory set for edge joint cover profiles ...........................................................4872906 Accessory set for edge joint cover profiles ...........................................................4872907 Accessory set for edge joint cover profiles ...........................................................4872908 Accessory set for edge joint cover profiles ...........................................................4872909 Accessory set for edge joint cover profiles ...........................................................4873002 Square edging .......................................................................................................3373003 Square edging .......................................................................................................3373004 Square edging .......................................................................................................3373005 Square edging .......................................................................................................3373007 Square edging .......................................................................................................3373008 Square edging .......................................................................................................3373009 Square edging .......................................................................................................3373010 Square edging .......................................................................................................3373022 Square edging .......................................................................................................3373023 Square edging .......................................................................................................3373024 Square edging .......................................................................................................3373025 Square edging .......................................................................................................3373027 Square edging .......................................................................................................3373028 Square edging .......................................................................................................3373029 Square edging .......................................................................................................3373030 Square edging .......................................................................................................3373032 Square edging .......................................................................................................3373033 Square edging .......................................................................................................3373034 Square edging .......................................................................................................3373035 Square edging .......................................................................................................3373037 Square edging .......................................................................................................3373038 Square edging .......................................................................................................3373039 Square edging .......................................................................................................3373040 Square edging .......................................................................................................3373042 Square edging .......................................................................................................3373043 Square edging .......................................................................................................3373044 Square edging .......................................................................................................3373045 Square edging .......................................................................................................3373047 Square edging .......................................................................................................3373048 Square edging .......................................................................................................3373049 Square edging .......................................................................................................3373050 Square edging .......................................................................................................3373052 Square edging .......................................................................................................3373053 Square edging .......................................................................................................3373054 Square edging .......................................................................................................3373055 Square edging .......................................................................................................3373057 Square edging .......................................................................................................3373058 Square edging .......................................................................................................3373059 Square edging .......................................................................................................3373060 Square edging .......................................................................................................3373102 Square edging .......................................................................................................3473103 Square edging .......................................................................................................3473104 Square edging .......................................................................................................3473105 Square edging .......................................................................................................3473107 Square edging .......................................................................................................3473108 Square edging .......................................................................................................3473109 Square edging .......................................................................................................3473110 Square edging .......................................................................................................3476699 Expansion joint profile for thick beds ....................................................................4676702 Expansion joint profile ...........................................................................................4676704 Expansion joint profile ...........................................................................................4676712 Expansion joint profile ...........................................................................................4676714 Expansion joint profile ...........................................................................................4676722 Expansion joint profile ...........................................................................................4676724 Expansion joint profile ...........................................................................................4676732 Expansion joint profile ...........................................................................................4676734 Expansion joint profile ...........................................................................................4676902 Expansion joint profile ...........................................................................................4676904 Expansion joint profile ...........................................................................................4676912 Expansion joint profile ...........................................................................................4676914 Expansion joint profile ...........................................................................................4676922 Expansion joint profile ...........................................................................................4676924 Expansion joint profile ...........................................................................................4676932 Expansion joint profile ...........................................................................................4676934 Expansion joint profile ...........................................................................................4677110 Standard profile for steps .....................................................................................4277111 Standard profile for steps .....................................................................................4277112 Standard profile for steps .....................................................................................4277120 Standard profile for steps .....................................................................................4377130 Standard profile for steps .....................................................................................4377131 Standard profile for steps .....................................................................................4377132 Standard profile for steps .....................................................................................4377511 Standard profile for steps .....................................................................................4277512 Standard profile for steps .....................................................................................4277700 Complete standard set .........................................................................................4377701 Complete standard set .........................................................................................4477702 Complete standard set .........................................................................................4477710 Complete system set ............................................................................................4277719 Complete system set ............................................................................................4277750 Complete system set ............................................................................................4277759 Complete system set ............................................................................................4277790 Step edging profile “Real wood”, type 1 ...............................................................41
Item number summary
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
IND-8
Tile edgingsIndex
Item number summary
78190 Square tile corner ..................................................................................................3578191 Square tile corner ..................................................................................................3578192 Square tile corner ..................................................................................................3578193 Square tile corner ..................................................................................................3578195 Square tile corner ..................................................................................................3578196 Square tile corner ..................................................................................................3578197 Square tile corner ..................................................................................................3578198 Square tile corner ..................................................................................................3578202 Angle profile, pliable ..............................................................................................2078203 Angle profile, pliable ..............................................................................................2078204 Angle profile, pliable ..............................................................................................2078212 Angle profile, pliable ..............................................................................................2078213 Angle profile, pliable ..............................................................................................2078220 Quarter circle external corner ...............................................................................2678221 Quarter circle external corner ...............................................................................2678222 Quarter circle external corner ...............................................................................2678223 Quarter circle external corner ...............................................................................2678224 Quarter circle external corner ...............................................................................2678225 Quarter circle external corner ...............................................................................2778226 Quarter circle external corner ...............................................................................2778227 Quarter circle external corner ...............................................................................2778228 Quarter circle external corner ...............................................................................2778230 Quarter circle external corner ...............................................................................2878231 Quarter circle external corner ...............................................................................2878232 Quarter circle external corner ...............................................................................2878233 Quarter circle external corner ...............................................................................2878235 Quarter circle external corner ...............................................................................2878236 Quarter circle external corner ...............................................................................2878237 Quarter circle external corner ...............................................................................2878238 Quarter circle external corner ...............................................................................2878240 Quarter circle internal corner ................................................................................3178241 Quarter circle internal corner ................................................................................3178242 Quarter circle internal corner ................................................................................3178243 Quarter circle internal corner ................................................................................3178245 Quarter circle internal corner ................................................................................3178246 Quarter circle internal corner ................................................................................3178247 Quarter circle internal corner ................................................................................3178248 Quarter circle internal corner ................................................................................3178250 Square tile corner ..................................................................................................3578251 Square tile corner ..................................................................................................3578252 Square tile corner ..................................................................................................3578253 Square tile corner ..................................................................................................3578260 Quarter circle external corner ...............................................................................2678261 Quarter circle external corner ...............................................................................2678262 Quarter circle external corner ...............................................................................2678263 Quarter circle external corner ...............................................................................2678264 Quarter circle external corner ...............................................................................2678270 Quarter circle internal corner ................................................................................2978271 Quarter circle internal corner ................................................................................2978272 Quarter circle internal corner ................................................................................2978273 Quarter circle internal corner ................................................................................2978274 Quarter circle internal corner ................................................................................2978340 Quarter circle internal corner ................................................................................3078341 Quarter circle internal corner ................................................................................3078342 Quarter circle internal corner ................................................................................3078343 Quarter circle internal corner ................................................................................3078344 Quarter circle internal corner ................................................................................3078345 Quarter circle internal corner ................................................................................2978346 Quarter circle internal corner ................................................................................2978347 Quarter circle internal corner ................................................................................2978348 Quarter circle internal corner ................................................................................2978349 Quarter circle internal corner ................................................................................2978350 Quarter circle internal corner ................................................................................2978351 Quarter circle internal corner ................................................................................2978352 Quarter circle internal corner ................................................................................2978353 Quarter circle internal corner ................................................................................2978354 Quarter circle internal corner ................................................................................2978355 Quarter circle internal corner ................................................................................2978356 Quarter circle internal corner ................................................................................2978357 Quarter circle internal corner ................................................................................2978358 Quarter circle internal corner ................................................................................2978359 Quarter circle internal corner ................................................................................2978360 Quarter circle internal corner ................................................................................2978361 Quarter circle internal corner ................................................................................2978362 Quarter circle internal corner ................................................................................2978363 Quarter circle internal corner ................................................................................2978364 Quarter circle internal corner ................................................................................2978370 Quarter circle internal corner ................................................................................2978371 Quarter circle internal corner ................................................................................2978372 Quarter circle internal corner ................................................................................2978373 Quarter circle internal corner ................................................................................2978374 Quarter circle internal corner ................................................................................2978375 Quarter circle internal corner ................................................................................3078376 Quarter circle internal corner ................................................................................3078377 Quarter circle internal corner ................................................................................3078378 Quarter circle internal corner ................................................................................3078400 Quarter circle internal corner ................................................................................3078401 Quarter circle internal corner ................................................................................30
77791 Step edging profile “Real wood”, type 2 ...............................................................4177795 Step edging profile “Real wood”, type 1 ...............................................................4177796 Step edging profile “Real wood”, type 2 ...............................................................4178060 Quarter circle external corner ...............................................................................2878061 Quarter circle external corner ...............................................................................2878062 Quarter circle external corner ...............................................................................2878063 Quarter circle external corner ...............................................................................2878070 Quarter circle external corner ...............................................................................2878071 Quarter circle external corner ...............................................................................2878072 Quarter circle external corner ...............................................................................2878073 Quarter circle external corner ...............................................................................2878075 Quarter circle external corner ...............................................................................2878076 Quarter circle external corner ...............................................................................2878077 Quarter circle external corner ...............................................................................2878078 Quarter circle external corner ...............................................................................2878078 Quarter circle external corner ...............................................................................2878080 Quarter circle external corner ...............................................................................2878081 Quarter circle external corner ...............................................................................2878082 Quarter circle external corner ...............................................................................2878085 Quarter circle external corner ...............................................................................2878086 Quarter circle external corner ...............................................................................2878087 Quarter circle external corner ...............................................................................2878088 Quarter circle external corner ...............................................................................2878090 Quarter circle external corner ...............................................................................2878091 Quarter circle external corner ...............................................................................2878092 Quarter circle external corner ...............................................................................2878093 Quarter circle external corner ...............................................................................2878100 Quarter circle internal corner ................................................................................3178101 Quarter circle internal corner ................................................................................3178102 Quarter circle internal corner ................................................................................3178103 Quarter circle internal corner ................................................................................3178110 Quarter circle internal corner ................................................................................3178111 Quarter circle internal corner ................................................................................3178112 Quarter circle internal corner ................................................................................3178113 Quarter circle internal corner ................................................................................3178115 Quarter circle internal corner ................................................................................3178116 Quarter circle internal corner ................................................................................3178117 Quarter circle internal corner ................................................................................3178118 Quarter circle internal corner ................................................................................3178120 Quarter circle internal corner ................................................................................3178121 Quarter circle internal corner ................................................................................3178122 Quarter circle internal corner ................................................................................3178123 Quarter circle internal corner ................................................................................3178125 Quarter circle internal corner ................................................................................3178126 Quarter circle internal corner ................................................................................3178127 Quarter circle internal corner ................................................................................3178128 Quarter circle internal corner ................................................................................3178130 Quarter circle internal corner ................................................................................3178131 Quarter circle internal corner ................................................................................3178132 Quarter circle internal corner ................................................................................3178133 Quarter circle internal corner ................................................................................3178140 Quarter circle external corner ...............................................................................2778141 Quarter circle external corner ...............................................................................2778142 Quarter circle external corner ...............................................................................2778143 Quarter circle external corner ...............................................................................2778144 Quarter circle external corner ...............................................................................2778145 Quarter circle external corner ...............................................................................2678146 Quarter circle external corner ...............................................................................2678147 Quarter circle external corner ...............................................................................2678148 Quarter circle external corner ...............................................................................2678149 Quarter circle external corner ...............................................................................2678150 Quarter circle external corner ...............................................................................2678151 Quarter circle external corner ...............................................................................2678152 Quarter circle external corner ...............................................................................2678153 Quarter circle external corner ...............................................................................2678154 Quarter circle external corner ...............................................................................2678155 Quarter circle external corner ...............................................................................2678156 Quarter circle external corner ...............................................................................2678157 Quarter circle external corner ...............................................................................2678158 Quarter circle external corner ...............................................................................2678159 Quarter circle external corner ...............................................................................2678160 Quarter circle external corner ...............................................................................2678161 Quarter circle external corner ...............................................................................2678162 Quarter circle external corner ...............................................................................2678163 Quarter circle external corner ...............................................................................2678164 Quarter circle external corner ...............................................................................2678170 Square tile corner ..................................................................................................3578171 Square tile corner ..................................................................................................3578172 Square tile corner ..................................................................................................3578173 Square tile corner ..................................................................................................3578180 Square tile corner ..................................................................................................3578181 Square tile corner ..................................................................................................3578182 Square tile corner ..................................................................................................3578183 Square tile corner ..................................................................................................3578185 Square tile corner ..................................................................................................3578186 Square tile corner ..................................................................................................3578187 Square tile corner ..................................................................................................3578188 Square tile corner ..................................................................................................35
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile edgings | 97042 | 01 2017 | 71708
IND-9
Tile edgingsIndex
Item number summary
78402 Quarter circle internal corner ................................................................................3078403 Quarter circle internal corner ................................................................................3078405 Quarter circle external corner ...............................................................................2778406 Quarter circle external corner ...............................................................................2778407 Quarter circle external corner ...............................................................................2778408 Quarter circle external corner ...............................................................................2778410 Quarter circle internal corner ................................................................................3178411 Quarter circle internal corner ................................................................................3178412 Quarter circle internal corner ................................................................................3178413 Quarter circle internal corner ................................................................................3178415 Quarter circle external corner ...............................................................................2878416 Quarter circle external corner ...............................................................................2878417 Quarter circle external corner ...............................................................................2878418 Quarter circle external corner ...............................................................................2878420 Square tile corner ..................................................................................................3678421 Square tile corner ..................................................................................................3678422 Square tile corner ..................................................................................................3678423 Square tile corner ..................................................................................................3678425 Square tile corner ..................................................................................................3678426 Square tile corner ..................................................................................................3678427 Square tile corner ..................................................................................................3678428 Square tile corner ..................................................................................................3678980 Tile wedge .............................................................................................................3778981 Tile spacer .............................................................................................................3778982 Tile spacer .............................................................................................................3778983 Tile spacer .............................................................................................................3778984 Tile spacer .............................................................................................................3778987 Tile T ......................................................................................................................3878988 Tile T ......................................................................................................................3879920 Corner bead ..........................................................................................................6079940 Corner bead ..........................................................................................................60
79941 Depth gauge beads ...............................................................................................6079944 Depth gauge beads ...............................................................................................6079945 Depth gauge beads ...............................................................................................6079960 Corner bead ..........................................................................................................5979962 U-profile for wall ....................................................................................................5879963 U-profile for wall ....................................................................................................5879964 Maxi wall C-profile ................................................................................................5879965 Maxi wall C-profile ................................................................................................5879966 Dry construction profile .........................................................................................5879981 Wall covering corner bar .......................................................................................5988000 clipstech® support profile ....................................................................................5288001 clipstech® support profile ....................................................................................5288002 clipstech® support profile ....................................................................................5288003 clipstech® support profile ....................................................................................5288004 clipstech® support profile ....................................................................................5288010 clipstech® cover strip ..........................................................................................5288011 clipstech® cover strip ..........................................................................................5288012 clipstech® cover strip ..........................................................................................5288019 clipstech® cover strip ..........................................................................................5288209 Plug system...........................................................................................................5288400 clipstech® support profile ....................................................................................5288401 clipstech® support profile ....................................................................................5288402 clipstech® support profile ....................................................................................5288403 clipstech® support profile ....................................................................................5288404 clipstech® support profile ....................................................................................5288410 clipstech® cover strip ..........................................................................................5288411 clipstech® cover strip ..........................................................................................5288412 clipstech® cover strip ..........................................................................................5288419 clipstech® cover strip ..........................................................................................5289010 clipstech® cover strip ..........................................................................................5289410 clipstech® cover strip ..........................................................................................52
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
Tile
ed
ging
s | 9
7042
| 01
201
7 | 7
1708
IND-10
Tile edgingsIndex
Terms and Conditions of Supply and Payment
1. Scope
1.1. These Terms and Conditions of Supply and Payment for Exports apply to all
contractual agreements between ourselves and parties placing orders with us which
have their registered offices or the branch involved with the contractual agree-
ment outside the territory of the Federal Republic of Germany. That branch which
concludes the contractual agreement in its own name shall respectively apply.
1.2. These Terms and Conditions of Supply and Payment for Exports shall not
apply if the party placing the order acquires the goods for personal use or use in
a family or household and we knew or should have known such upon the con-
clusion of the agreement.
1.3. If the party placing the order’s terms and conditions of purchase differ from
these Terms and Conditions of Supply and Payment for Exports, such terms and
conditions of purchase shall only apply if such are expressly confirmed in writing by
ourselves. Counter-confirmations by a party placing an order citing its own terms
and conditions are herewith expressly contested and rejected.
1.4. Our Terms and Conditions of Supply and Payment shall also apply exclu-
sively and without restriction even if we effect supply to the party placing the or-
der without reservation in awareness of contrary or differing terms and conditions
of the party placing the order.
2. Conclusion and subject of the agreement
2.1. Any and all of our offers are non-binding.
2.2. Models, illustrations, drawings, colour tones, etc., that are contained in cat-
alogues, brochures and other printed matter may differ slightly from the features
of the products to be supplied as a result of printing technology; such differenc-
es shall not be deemed to constitute defects.
2.3. Illustrations and drawings relating to our goods in brochures, written advertis-
ing material and on price lists as well as the data contained therein, e.g. on materi-
al, dimensions or shape, shall only become a legally binding part of the agreement
if the agreement expressly makes reference to such. Information on product fea-
tures shall not be deemed to constitute an assumption of guarantee.
2.4. The party placing an order shall notify us prior to the conclusion of the agree-
ment if the goods to be supplied are supposed to be suited solely for regular use
or are to be used under unusual or special conditions or if the goods are to be
used in any conditions posing a health, safety or environmental risk or the goods
will be subject to increased demands or if use of the goods could be associated
with unusual possibilities for damage or unusual amounts of damage which the
party placing the order is aware of or should be aware of.
3. Custom-made products
3.1. Custom-made products shall be deemed to designate all models that devi-
ate from the models referenced in the respectively valid catalogue or brochure.
This especially applies with regard to colours.
3.2. Orders for custom-made products without exception require written confirma-
tion by both parties in the information on the design, dimensions, etc.
3.3. The party placing the order shall not acquire any rights to tools by virtue of
paying remuneration for costs or shares of costs for the creation or acquisition of
tools; we shall retain title to tools.
3.4. Requested samples shall only be supplied subject to charge.
3.5. We shall not be liable for defects that emanate from documents submit-
ted to us by the party placing the order with respect to custom-made products.
3.6. If the custom-made product is manufactured based on drawings, models or
other information provided by the party placing the order, we shall not be liable
for the violation of third-party protective rights. The party placing the order here-
with indemnifies us with respect to claims by third parties.
4. Minimum order value and prices
4.1. The minimum order value for initial orders is EUR 150.00 plus taxes and cus-
toms duties. The minimum order value for all subsequent orders is EUR 25.00
plus taxes and customs duties.
4.2. Prices do not include possible additional charges such as duties, taxes and
other levies and, if nothing to the contrary results from the confirmation of contract
and number 5.1 below, apply EXW (Incoterm 2010) from our plant in Wutöschin-
gen not including freight and packaging costs.
5. Freight and packaging costs
5.1. By way of deviation from EXW (Incoterms 2010), consignments having an
order value of at least EUR 250.00 not including taxes and customs duties shall
be shipped free domicile in Germany and franco frontier to foreign countries.
5.2. The weights and piece numbers determined upon shipment shall apply in the
calculation of freight costs.
5.3 Packaging costs shall be charged at the usual rates in this line of business.
6. Delivery and transfer of risk
6.1. EXW (Incoterms 2010) from our plant in Wutöschingen shall apply to delivery
and transfer of risk even if we assume the freight costs unless a special delivery
clause has been agreed upon.
6.2. If the goods are transported to the party placing the order, such shall be at
the risk of the party placing the order. In this case risk shall be transferred to the
party placing the order at that point in time at which the first carrier takes on the
goods. If the goods are ready for shipment and shipment is delayed for reasons
for which we are not responsible, risk shall be transferred to the party placing the
order upon receipt of the notice of readiness for shipment.
7. Delivery periods, non-availability of performance and delay
7.1. The delivery periods stated are generally non-binding.
7.2. A bindingly committed delivery period shall commence upon the date on which
our confirmation of order is sent, but at the earliest at the point in time at which all
documents and data to be provided by the party placing the order are received by us.
7.3. The delivery period shall be deemed to have been adhered to if the goods
leave the plant before the delivery period expires or notification has been provid-
ed that the goods are ready for shipment.
7.4. If we are unable to meet binding delivery periods in whole or regarding part
of the goods to be delivered, we shall notify the party placing the order with-
out undue delay and at the same time notify the party placing the order about
the probable new delivery period. If the good to be delivered is still not availa-
ble before the expiry of the new delivery period for reasons for which we are not
responsible, we shall be entitled to cancel the agreement in whole or in part; we
shall repay any counter-performance already rendered by the party placing the
order without undue delay.
7.5. In any case a claim to compensation for late delivery on the part of the par-
ty placing the order shall be subject to the requirement that the party placing
the order has set us a reasonable grace period and we have not effected deliv-
ery within this period.
7.5. The legal rights of the party placing the order shall otherwise remain unaffect-
ed. We shall only bear liability, however, if we are responsible for the delay and only
within the framework of no. 11 below. We shall in particular not be responsible for
delivery not being effected to us in due time by our suppliers.
8. Terms and conditions of payment
8.1. The party placing the order shall review all invoices without undue delay af-
ter receiving such to make sure that they are correct and complete. Any objec-
tions to invoices shall be issued in writing within a period of one month after their
receipt. Failure to state objections in due time shall be deemed to constitute ap-
proval of the invoice.
8.2. Our invoices shall be due for payment within 10 days with a 2% discount or
within 30 days of the respective invoice date net. The date when payment is cred-
ited to the account stated
for payment on the invoice shall apply in determining whether payment has been
effected in due time by the party placing the order. The party placing the or-
der shall bear all additional costs that arise in connection with the selection of
the means of payment.
8.3. If the party placing the order fails to pay the purchase price in due time, we
shall be entitled notwithstanding other legal recourse to charge interest on ar-
rears in the amount of 9 percentage points above the respective base interest
rate of the European Central Bank. We reserve the right to claim damage go-
ing above and beyond this.
8.4. We shall be entitled to transfer our claims emanating from the business rela-
tionship with the party placing the order for the purposes of factoring.
8.5. If payment is rendered with a bill of exchange, the party placing the order shall
bear the costs of such, in particular discounting and collection charges. No dis-
count shall be granted if payment is effected by bill of exchange.
8.6. Costs of a bill of exchange that has been invoiced shall be due for payment
immediately without any deductions.
8.7. Bills of acceptance and bills of exchange shall only be deemed to constitute
payment after their redemption.
8.8. Setting off or netting amounts shall only be possible in the case of counter-claims
that are based on the same legal relationship, that have been effectively estab-
lished by a court of law or government authority, or are uncontested or recognised.
8.9. The party placing the order shall only be entitled to exercise a right of reten-
tion if its counter-claim is based on the same legal relationship.
8.10. We shall be entitled to credit payments effected by the party placing the or-
der to older debt of said party.
9. Examination and notification of non-conformity obligation
9.1. The party placing the order shall properly examine the goods or have the
goods properly examined without undue dely.
9.2. Shipping papers may not be signed (including subject to reservation) be-
fore the number of boxes delivered has been compared with the information con-
tained in the shipping papers. Boxes that are missing or damaged must be noted
with precise information on such being provided on the shipping papers and be
confirmed by the freight carrier driver by means of a clearly identifiable signature.
9.3. Our liability for the goods violating the agreement shall cease to apply with-
out the party placing the order for this reason being able to exonerate itself if the
party placing the order fails to notify us about such violation of the agreement in
writing within a period of 7 working days (Saturdays shall not be deemed to consti-
tute working days) after it determines such or should have determined such while
precisely stating the type of violation of agreement. Written notification of lack of
conformity by the party placing the order must have been sent by the party placing
the order within the aforementioned period; above and beyond the notice of lack
of conformity being sent in due time, such must also actually be received by us.
9.4. If after a notice of lack of conformity is issued by the party placing the order
no violation of the agreement can be identified, the party placing the order shall
reimburse us for the costs incurred in connection with the inspection of the goods.
9.5. The party placing the order shall at any rate lose the right to claim lack of con-
formity of the goods if it does not provide notice of such within a period of no more
than 12 months after it has actually been handed over the goods unless we have
granted a longer period of guarantee to the party placing the order.
10. Goods lacking conformity or exhibiting legal defects
10.1. Goods for which a complaint has been issued shall be properly stored
and kept available
to us.
10.2. We shall be provided the opportunity to inspect the goods for which a com-
plaint has been issued.
10.3. If it is demonstrated that the goods lack conformity, we shall be entitled even
after the agreed-upon delivery period either to remedy the lack of conformity of
the goods by repair or supply a substitute contemporaneously with return of the
goods for which a complaint has been issued as we see fit. In the event of reme-
dy by repair or supply of substitute goods, we shall be obligated to bear all of the
expenses that are required for this purpose (including transport, road, labour and
material costs) if such expenses do not increase because the goods have been
sent to a place other than the place of fulfilment of the agreement.
10.4. If the party placing the order sets a reasonable grace period for remedy by
repair or supply of substitute goods and repair or supply of substitute goods does
not take place within this grace period or if such is refused by us, the party placing
the order shall be entitled to reduce the purchase price or declare the agreement
avoided in accordance with statutory arrangements. The reduction of the purchase
price shall be limited to the damage incurred by the customer.
10.5. Supply of substitute goods or remedy by repair shall not cause the period
laid down in no. 9.5 to recommence anew.
11. Liability
11.1. We shall bear unlimited liability for harm to life and limb or health impairment
that is due to the wilful or negligent violation of an obligation by ourselves or that
is due to a wilful or negligent violation of an obligation by our legal representative
or parties we hire to carry out the agreement.
11.2. We shall bear liability based on the principles of German law governing prod-
uct liability and on the assumption of a guarantee.
11.3. We shall moreover only bear liability in the case of wilful or negligent violation
of an essential contractual obligation and only for direct damage that was fore-
seeable and which typically occurs at the point in time when the agreement was
concluded. An essential contractual obligation shall be deemed to be an obliga-
tion that makes the proper fulfilment of the agreement concluded with the party
placing the order possible in the first place and which the party placing the order
trusted in and was able to trust in and the culpable failure to fulfil such jeopard-
ises achievement of the purpose of the agreement.
11.4. Our liability is excluded in all other cases, in particular for indi-
rect damage and
subsequent damage (including foregone profit, loss of goodwill, damage due to
loss of production and comparable expenses) unless the party placing the order
expressly drew our attention to such in accordance with no. 2.4. prior to the con-
clusion of the agreement.
11.5. If our liability is excluded or limited, this shall also apply to our employees,
representatives and parties we hire to carry out the agreement.
12. Reservation of title
12.1. We reserve title to the goods supplied by us if our claim to the purchase
price is not secured by some other means (e.g. a letter of credit) until payment of
all current and future claims emanating from the purchase agreement and the on-
going business relationship (the claims to be secured) is effected.
12.2. We shall be obligated to release collateral that we are entitled to as we see
fit to the extent that the realisable value of the collateral exceeds our claims to
be secured by more than 10% if so requested by the party placing the order.
12.2. The party placing the order shall notify us without undue delay in the event
of attachment, confiscation or similar and in the event of the goods supplied be-
ing damaged and/or lost; any violation of this obligation as well as any other con-
duct of the buyer in violation of the agreement, in particular failure to pay the pur-
chase price due for payment, shall provide us the right to declare this agreement
avoided. The party placing the order shall bear all the costs that have had to be in-
curred particularly within the framework of a third -party action successfully lifting
an attachment and that may have had to be incurred to successfully reacquire the
objects supplied if such cannot be collected from third parties.
12.3.
If we have effectively declared the agreement avoided, we shall be entitled to take
back the goods subject to reservation of title if we have threatened to take the
goods back a reasonable time in advance. The costs incurred as a result of ex-
ercise of the right to take back the goods, in particular transport costs, shall be
borne by the party placing the order. We shall be entitled to exploit the goods sub-
ject to reservation of title and satisfy our claims from the proceeds from such ex-
ploitation if we have threatened such exploitation a reasonable time in advance.
If the proceeds exceed the unsatisfied claims emanating from the contractual re-
lationship, this surplus amount shall be handed over to the party placing the order.
13. Place of fulfilment, applicable law and legal venue
13.1. The place of fulfilment for delivery and payment shall be our head office
(Wutöschingen).
13.2. The Convention of the United Nations on the International Sale of Goods from
11 April 1980 (UN purchasing law/CISG) in the English-language version shall ap-
ply to the legal relationship with the party placing the order. Legal issues that are
not set out in this Convention or which cannot be decided in accordance with its
principles shall be subject to German law.
13.3. The sole legal venue for all disputes arising in connection with the agreement
is the courts having jurisdiction over our head office of the company in Wutöschin-
gen. We shall, however, also be entitled to assert claims with courts having juris-
diction over the party placing the order.
alfer® aluminium Gesellschaft mbH
Commercial Register of Freiburg Local Court HRB 620 227 Status: 08/2014
alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com
IND-11
bahama beigepolished jasmine- pergamon
jasmin-pergamon
polished manhattan grey
manhattan grey
brilliant-white
brilliant-white
fawn brown
stainless steel, brushed
chrome look
black brown
oak (real wood)
taupe marbled white
dark grey
dark grey
bahama beigemanhattan grey
silver
caramel red
brushed black
ivory
grey-beige
antique white
black
uncoated
bronze
brown
champagne
stainless steel
silver silver, polished
galvanized
white
white
grey
stainless steel, polished
brass
brass brass, glossy
brass, glossy
titanium
Tile edgingsAvailable in a choice of colours
Uncoated and anodized aluminium
Steel, stainless steel, brass and real wood
Powder-coated aluminium
Plastic
The colours shown are for reference purposes only and may differ from the actual colours for display reasons.
71708 | 0117
alfer®
alu
min
ium
alfer® aluminium Gesellschaft mbH Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] 4<ALBBMR=jhaecj>
EN
9704
2 | T
ile e
dgi
ngs
| 01
2017