LATERAL ANALYSISP vs yt and MmaxP 2.5 7.5 12.5 17.5 20 22.5 25 yt 0.63 2.7 5.68 9.62 12 14.8 17.8 Mmax 20.92 73.42 140 217.5 260.83 306.67 355.83

VERTICAL ANALYSISL vs Qdw and QupL 5 11.11 17.22 23.33 29.44 35.56 41.67 47.78 53.89 60 Qdw 0.03 31.86 71.35 72.42 73.21 100 126.86 153.71 180.6 207.26 Qup 0.7 3.03 8.91 18.27 30.84 52.09 73.35 94.65 115.95 137.11

U pdate Lateral Data

U pdate Vertical D ata

INSTRUCTIONS: 1. Run Lateral Analysis in Allpile , then click [To MS-Excel] button to begin the data transfer. 2. Check [Enable Macros] if you are asked while Excel is being opened. 3. After opening this Excel file, press [Update Lateral Data] button to upload the transferred data onto the spreadsheet. 4. Turn to [Lateral-y] sheet or [Lateral-M] sheet for graphical output.

INSTRUCTIONS: 1. Run Lateral Analysis in Allpile , then click [To MS-Excel] button to begin the data transfer. 2. Check [Enable Macros] if you are asked while Excel is being opened. 3. After opening this Excel file, press [Update Vertical Data] button to upload the transferred data onto the spreadsheet. 4. Turn to [Vertical-Qd], [Vertical-Qu], or [Vertical-2Q] sheet for graphical output.

Notes: 1. You can save the file under different file name. But do NOT delete this file: allpile.xls 2. You can customize the format of the graphs if you are familiar with Excel. Make sure each graph is linked to appropriate source on the [Data] sheet. 3. Do not change the contents on the [Data] sheet. 4 If you want to run a new analysis in Allpile again, you MUST close the Excel program first. Only one Excel program can be opened at any time. Units: 0