w w w . n a t i o n a l f o r m i n g . c o m

Handset modular systemConcrete Pressure of 60 kN/m2

ALPAN Aluminium Panel Wall Forms

2 w w w. n at i o n a l f o rm i n g . co m

ALPAN Wall FormsDesigned for concrete pressure of 60 kN/m2

LIGHTWEIGHT, HIGH STRENGTH AND EFFICIENT PANEL SYSTEMALPAN Wall Forms are light weight compared to the size of the panels, 22 kg per m2 and high strength, allowing easy and fast hand set installation on a job site. This new panel wall form system gives contractors more options when assembling panels in large gang form structures and allows easy dismantling upon completion.

The main structural support member is not the outside panel frame as it is with present similar systems. It is the middle box beam member that supports ties running through it. The middle box member on a 2.9 m high panel has three cone shaped holes for tie installations and with its con�guration does not allow cement seepage during concrete pour.

Upon dismantling of ALPAN Panels, due to the unique position of ties in the middle of the panel, a symmetrical imprint of the panels with its central tie holes outlined by the frame line is created on the concrete wall.

ALPAN Panel frame is made of high strength aluminum alloy with members welded together using robotic equipment in order to maintain standard quality of product.

31- 8 8 8 - 870 - 0 0 9 0

HIGHLIGHTS

Only three main elements:

ALPAN Panels•

Connecting Wedge Clamp•

Ties •

SIMPLICITY

Ingenuity of tie systemWith the central positioning of tie holes on the panel it is required that the ties are always placed in. As is often the case with other similar systems mistakes of forgetting to place plastic plugs on tie holes not in use are eliminated.

Fast and accurate assemblyUnique configuration and shape of the extrusion members of ALPAN Panels allow attachment of 190 Aluminum Beams for accomplishing a perfect strait wall form and ultimately superb strait concrete wall, eliminating the possibility for deviations between panels as it is the case with other similar systems.

SymmetryArranged imprint on the concrete surface upon dismantling of ALPAN Panels gives a nice and symmetrical raster appearance.

4 w w w. n at i o n a l f o rm i n g . co m

ALPAN Wall FormsDesigned for concrete pressure of 60 kN/m2

There are two ways of handling ALPAN Wall Forms:

CRANE SET OPTIONALPAN Panels are assembled by hand into a large wall form and as such it is lifted by a crane and �own into position for concrete placement. The sizes of ALPAN Wall Forms depend only on the capacity of the crane.

HAND SET OPTION ALPAN Panels can be assembled as a wall form with the hand set method; placing panel next to panel and installing connection wedge clamps in order to assemble a wall form ready for concrete placement. Also dismantling of ALPAN Wall Forms could be easily performed without the need of crane assistance and crane set option.

Efficient and easy tie installation: Installation and dismantling of ties is performed only from one side of the ALPAN Wall Forms, because tie plates with welded nuts on the other side are permanently attached to the middle box beam member of the ALPAN Panel (Fig.1). Working from only one side of the ALPAN Wall Form, tie rods are pushed through the ALPAN Panel and plastic spacer pipes, between panels, to the opposite ALPAN Panel that has �xed plates with welded nuts (Fig. 2 & 3) where the tie rods are secured. Then working from the installation side two ALPAN Panels are secured by tightening of the tie rods with wing nuts (Fig.4).

Fig. 1

Fig. 3 Fig. 4

Fig. 2

OR

51- 8 8 8 - 870 - 0 0 9 0

Panel Dimensions

System Elements

Panel High (mm) Panel Width (mm)

900 600 300

2700 56.15 kg 43.63 kg 22.01 kg

1800 37.53 kg 29.08 kg 14.67 kg

900 18.75 kg 14.54 kg 7.34 kg

Connecting Wedge Clamp Part No. 8245

Adjustable Clamp Part No. 8246

Bulkhead Clamp Part No. 8247

ALPAN Lifting Lug Part No. 8250

Tie Rod Assembly and Plastic Spacer Pipe Part No. 8262 and Part No. 8384

Fix Tie Plate Part No. 8253

600

Dimensions in millimeters

900

900

1800

2700

900

1800

2700

300

900

1800

2700

6 w w w. n at i o n a l f o rm i n g . co m

ALPAN Wall FormsDesigned for concrete pressure of 60 kN/m2

CORNER DETAILS

Inside Corner

Outside CornerINSIDE CORNER with Universal Tie Plate

Outside Hinged Corner

OUTSIDE CORNER Clamping Detail

Corner Details with di�erent wall thickness and same inside corner member

150 mm

250 mm

200 mm

300 mm

Min. 550

Inside Hinged CornerARTICULATED CORNER

71- 8 8 8 - 870 - 0 0 9 0

ALPAN Universal Panel metric dimensions (mm) Column Sides adjustable every 50 mm starting from 150 mm to maximum 800 mm.

Column Assembly

ALPAN COLUMN FORMS - Assembly with ALPAN Universal Panels

Combi Plate Part No. 8478

Connection T-Bolt Part No. 8374

900 900 900

2700

1800

900

International O�ces

23325 Cajalco RoadPerris, CA 92570, USA

Tel: +1 951 943 4838Fax: +1 951 943 4637

International Locations

Dubai, U.A.E.Hong Kong, ChinaLimasol, CyprusTaipei, Taiwan R.O.C.

Forming IncNCS

info@nationalforming.comwww.nationalforming.com

1-888-870-0090

Calgary Branch235075 Ryan Road S.E. Calgary, AB Canada T2P 2G6

Tel: + 1 403 723 0444Fax: + 1 403 723 0440

310 Carion Road Kelowna, B.C. Canada V4V 2K5

Kelowna Branch

Tel: + 1 250 766 9315Fax: + 1 250 766 9317

7411 Vantage Way Delta, B.C. Canada V4G 1C9

Tel: + 1 604 946 0090Fax: + 1 604 946 6830

HEAD OFFICE

Žirovnica 107/A4274 Žirovnica, SloveniaTel: +386 5 99 34 014Fax: +386 4 58 41 994

Opažni SistemiMilovana Marinkovića 3311040 Beograd, Republika SrbijaTel: + 381 11 31 92 322Fax: + 381 11 39 80 335

Oplatni Sistemi