23 Pranab Jyoti Ghosh Ghosh Energy from Atmospheric Heat5 Robert R. Green Green Steam Engine8 Et3m Hortong Electron Orbit Energy Generator

11 Ken Rauen Rauen Environmental Heat Engine16 REVETEC Holdings Limited Revetec Cam-Drive Engine20 Barnabus Energy, Inc. SunCone24 ICYTI Walter Torbay's Magnetic Transgenerator28 Tim Harwood CD Motor32 Jim Ross Ross Motor35 Bill Williams Bill Williams' Joe Cell44 vlad Advanced Resonant Fields46 Joseph Newman Gyroscopic Magnetic Particle Motor 95 Eugenio Odorifero Progetto Valery - parte 5

104 James T.Yen Recent Developments of the Tornado-Type Wind Energy System119 AA.VV. Motori Stirling126 John Marshall Dudley Maxwell's Pressure Demon and the Second Law of Thermodynamics134 Un Eliodomestico Solidale135 Introduzione al magnetismo165 Tecnid Spa Torcia Dinamo TRI-LED

166 Tecnovelgy.com Artificial Gravity Generator Now Possible?168 Haiko Lietz Take a leap into hyperspace172 Jeff Cook Designs for generating Jeff Cook effect178 Joseph Misiolek La Manipolazione dello Spazio-Tempo

190 Franco Montefuscoli: intervista ed elaborati196 Kosol Ouch Ricapitolazione delle sue ricerche

232 Tecnovelgy.com Animaris Percipiere: Walking Robotic Sculpture Stores Wind Energy234 Spectra Watermachines Aquifer 150238 Robert A. Nelson Advances In Desalination: The Aul EGD Process 263 Bioarchitettura a cura di Luisa Motta e Paolo Vaccaro306 R.F.Norgan Einstein was Wrong - The Aether Exists 307 Gaia Giuliani Un piccolo robot vegetale che metter radici su Marte309 Andrea Rampado Disintegratore Magnetico Rotante

La sede dell'A.S.S.E. e della redazione di Altra Scienza sono presso il seguente indirizzo: Franco Malgarini via di Boccea 302 00167 Roma Email: fmalgarini@libero.it Sito Web: http://asse.altervista.org

La redazione non vuole impedire la distribuzione della rivista al di fuori dell'associazione. Tuttavia, ci pu essere un potenziale danno per l'associazione stessa, a meno che non ci sia reale necessit. Per il resto, vi preghiamo di usare il buon senso e di passarla solo a chi vi fidate. Ricordiamo che le iscrizioni sostengono non solo questa pubblicazione ma possono dare spazio ad ulteriori e pi utili iniziative.

La Redazione

3Directory:Ghosh Energy from Atmospheric HeatFrom PESWiki

Pranab Jyoti Ghohs seeks assistance for building a working prototype of a technology that would produce electricity from atmospheric heat, based on combining a number of well-proven concepts.

Table of contents 1 About1.1 Technology Description1.2 Advantages1.3 Contact2 See also[edit]

About [edit]

Technology Description Originally posted (http://peswiki.com/index.php?title=User_talk:Pranabjyoti&oldid=18176) March 26, 2006

Hello, My name is Pranab Jyoti Ghosh. I am an Indian physics graduate and I have developed a technology on producing energy without any kind of fuel. This technology produces energy by extracting energy from atmospheric heat. This technology is a combination of processes that are now in use in different industries and research projects worldwide successfully. In short, the scientific and technical feasibility of this technology cant be challenged. This isnt another perpetual motion machine type device. If anyone thinks so, I can answer him or her with scientific proof. But due to lack of technical and financial backing, I havent been able to make a working prototype yet. Can anybody suggest any company or organization that can help me to materialize my project? I am giving below a short summary of my project. Any positive suggestion is welcome. This project is aimed at producing electricity by using the vast heat content of atmosphere. In this project, this is done by using a mechanical arrangement similar to a heat pump. This system is used to squeeze energy from huge volumes of air and to produce temperature difference by which energy can be produced. It is to be noted that fresh water and salt are added bonus to this project, as salty brackish water can be used in this project. This is done by vaporizing water inside an enclosed container named Evaporator with the help of a vacuum pump. As the vacuum pump sucks air from the container, the water inside began to evaporate and in this process collects its latent heat of vaporization from water. For that reason, the water inside becomes colder and heat began to flow in from outside. Thus in effect, the latent heat of vaporization of water is collected from outside atmosphere. In the open-cycle OTEC, vapor is produced in the same manner and on experiment it was found that to have vapor flow rate of 1 kg/sec, power needed at the vacuum pump is 3 KW. Whereas, the latent heat embedded in 1 kg of vapor is 2.31 MW. After the vapor is produced, it is heated further with adiabatically compressed, hot air. After heating the vapor in the Boiler, the hot, compressed air is passed through the Evaporator to give up its residue heat to the water inside. The process is the same as that of common heat pumps sold in the market. And finally, the temperature difference between the Boiler and the Condenser is created by suddenly releasing the compressed air at the Condenser. And thus a system of real efficiency of >50% is created.

4[edit]Advantages I am giving below the merits that I think can be credited to my technology.

As no fuel is needed, the electricity produced by this technology will be cheaper than that produced by other conventional technologies.

As no fuel is used, therefore no question of any kind of emission can arise and it is cleaner than most of the existing technology.

It can be made with present state of technology. No engineering or scientific breakthrough is needed. The cost making a plant of this technology is less than that of a thermal power plant of same magnitude. It is

by nature much automated, so less manpower will be needed to run and maintain it. This technology uses the embedded heat that is stored in the lower part of the atmosphere. In effect it is a

part of solar energy falling on earth. Thats why basic source of energy is unlimited and there is no question of depleting reserve like coal, oil, gas etc.

This technology doesnt have the limitations and weakness of other present non-conventional energy technology. What is needed to construct a plant of this technology is just warm weather.

Salt and fresh water are added bonus to this technology, if seawater is used. It can be source of low cost air conditioning for buildings of close proximity.

[edit]Contact Name: Pranab Jyoti Ghosh (User:Pranabjyoti)Address: 153/10/C, S.N.Roy Rd., Kol 38, West Bengal, India Telephone: 91-33-24037734 E-Mail: mailto:pranabjyoti_calcutta@rediffmail.com?subject=Energy_from_atmospheric_heat_mentioned_at_PESWiki.com (mailto:pranabjyoti_calcutta@rediffmail.com?subject=Energy_from_atmospheric_heat_mentioned_at_PESWiki.com) [edit]

See also Thermal Electric Systems (http://www.freeenergynews.com/Directory/ThermoElectric/) - index at

FreeEnergyNews.com

- Other Directory listings- PESWiki home page Retrieved from "http://peswiki.com/index.php/Directory:Ghosh_Energy_from_Atmospheric_Heat"

5Directory:Green Steam EngineFrom PESWiki

A new piston steam engine design by Robert R. Green.

Designed for practical applications; is said to be extremely efficient, economical and easy to build. Provides an efficient means of converting reciprocating movement into rotary movement, simplifying the piston engine. Plans available.

Table of contents 1 About1.1 Official Website1.1.1 Plans1.1.2 Applications1.2 Patent1.3 Key Features1.4 Advantages1.4.1 General Steam Engine Advantages1.4.2 Green Steam Engine Advangates1.5 Comments1.6 Contact2 See also[edit]

About [edit]

Official Website http://www.greensteamengine.com/

[edit]Plans http://www.greensteamengine.com/products.htm Complete plans for constructing an engine. Includes:

drawings and dimensions of all the parts Diagrams for assembly Complete parts list Help-line for questions and trouble shooting

A person familiar with the operation of a drill press, band saw and threading tools can make this engine. A small metal lathe is optional. Most of the parts are modified, off the shelf, items. [edit]

Applications http://www.greensteamengine.com/flex%20rod%20applications.htm "Many new ideas for products will emerge from the "Flexible Rod Transmission" . Inquiries for manufacturing license agreements are welcome."

Air and Water Pumps - Multiple cylinders with overlapping phases supply a smooth flow of air with reduced load.

Traffic Barrier Strip - Rotary output activated by a pull cable in same axis as output shaft. POP Displays - Multiple activation of separate parts with individual timing and amplitude. Bicycle Derailleur - Horizontal movement without rotation by a pull cable. Water Propulsion Device - Rotary output from reciprocal activation at a distance.

6 Model Airplane, Boat or Train Engine - [edit]

Patent (US patent # 6647813 (http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO2&Sect2=HITOFF&p=1&u=/netahtml/search-bool.html&r=1&f=G&l=50&co1=AND&d=ptxt&s1=6647813&OS=6647813&RS=6647813)) 2003, Green [edit]

Key Features Quoting from http://www.greensteamengine.com/

The properties of the patented crank mechanism (called a "flexible rod transmission") invented by Robert Green, provides this engine with the advantage of eliminating the typical crankshaft and cam that requires lubrication and precision machining. It also provides the unique configuration whereby the cylinders are aligned in the same direction as the main shaft. The result is a compact, lightweight and slim engine that is extremely simple to construct and assemble.

The pistons and valves operate off a short piece of flexible shaft. Because the flexible shaft is fixed and cannot rotate, the piston rods and valve push rod are held in position while being reciprocated. The cylinders float, attached to a swivel ball fitting at their base. Much of the structure and weight of a typical steam engine has been eliminated. The unique feature of the "Flex Rod Transmission" is that it produces an intermittent movement whereby the valve movement is stopped in its open and closed position during the power and exhaust strokes. This gives prolonged, fully opened valve timing. In compliment, the pistons are held stationary while the valve moves between phases. The output shaft continues rotation while the pistons stand still. The result is that the efficiency is increased dramatically. The overall friction of the engine is reduced due to the small number of light weight moving parts, and the use of ball bearings throughout. The flex rod is nearly frictionless as the flexing is like a spring in which the energy required to flex it is returned in equal amounts.

[edit]Advantages [edit]

General Steam Engine Advantages Steam engines provide advantages such as: less pollution, quiet running, high torque at low speeds, no transmission requirements, runs on a choice of fuels, long life with low maintenance. [edit]

Green Steam Engine Advangates Quoting from http://www.greensteamengine.com/ Adding to this list of special advantages, the "Green Steam Engine" offers these unique features:

Runs on very low steam pressure and low volume (freewheels at 2 psi), Costs little to build, Nearly zero lubrication requirements, Can be assembled or disassembled in minutes, Extremely lightweight, Few moving parts, Boiler requirements are minimal, Can run in any position like an electric motor.

7 Very small profile for economy of space. May be variably configured for desired power vs speed requirements. Utilizes modern materials and methods previously not applied to steam power. Highly versatile and elegantly simple.

[edit]Comments Your comments here. [edit]

Contact Robert Green 2337 B Avenida Sevilla Laguna Woods, CA 92637 Email: mailto:rgreen999@Lworld.net?subject=Green_Steam_Engine_mentioned_at_PESWiki.com (mailto:rgreen999@Lworld.net?subject=Green_Steam_Engine_mentioned_at_PESWiki.com) PH. 949 581 2529 [edit]

See also Directory:Steam Engines Directory:Engines

- Other Directory listings- PESWiki home page Retrieved from "http://peswiki.com/index.php/Directory:Green_Steam_Engine"

8Directory:Hortong Electron Orbit Energy GeneratorFrom PESWiki

HORTONG is an electronic circuit that when connected to an electrical system is said to increase its efficiency considerably. Works for AC or DC. HORTONG (E=mc2) is a new process of transformation of energy with no need to use radioactive material to obtain the loosening of energy of the orbit of the electron. Apparently based on the work of Myron L. Evans, who may be working with the company. It is an energy from mass concept.

About

This is a new page. You are welcome and invited to help us expand its contents. Once the page has become more mature and adequately populated, this notice can be removed.[edit]

Official Website http://www.et3m.com/ - In Spanish

[edit]Spanish-to-English Translation of Site Translation by AltaVista

Home page (http://world.altavista.com/babelfish/trurl_pagecontent?lp=es_en&trurl=http%3a%2f%2fwww.et3m.com)

HORTONG, generator of the orbit of the electron (http://world.altavista.com/babelfish/trurl_pagecontent?lp=es_en&trurl=http%3a%2f%2fwww.et3m.com%2fserv01.htm) - Explanatory page.

Photos (http://world.altavista.com/babelfish/trurl_pagecontent?lp=es_en&trurl=http%3a%2f%2fwww.et3m.com%2fserv02.htm)

Magg Power(R) (http://world.altavista.com/babelfish/trurl_pagecontent?lp=es_en&trurl=http%3a%2f%2fwww.et3m.com%2fprod01.htm) - Basically a power factor correction technology.

Quantum Power (http://world.altavista.com/babelfish/trurl_pagecontent?lp=es_en&trurl=http%3a%2f%2fwww.et3m.com%2fprod02.htm) - Quantum Power Fuel and Diesel engine is electronic systems of magnetic orientation with the following qualities: It increases the engine power; The fuel mixture improves the combustion when {ordering}; It increases the yield of the electrical system.

Quantum Medic (http://world.altavista.com/babelfish/trurl_pagecontent?lp=es_en&trurl=http%3a%2f%2fwww.et3m.com%2fprod03.htm) - fortifies the field of surrounding energy to the human with but recent body and the outpost power technology by means of electromagnetic frequency.

Solar Energy (http://world.altavista.com/babelfish/trurl_pagecontent?lp=es_en&trurl=http%3a%2f%2fwww.et3m.com%2fprod04.htm) - regular panel installation service.

Demo Hortong (http://world.altavista.com/babelfish/trurl_pagecontent?lp=es_en&trurl=http%3a%2f%2fwww.et3m.com%2fprod05.htm) - a device optimizer of direct current, used for demonstration of the operation of the Hortong circuit, taking advantage of to the maximum the generated energy.

Quantum Light (http://world.altavista.com/babelfish/trurl_pagecontent?lp=es_en&trurl=http%3a%2f%2fwww.et3m.com%2fprod06.htm) - is used to replace ballasts in lamps of public lighting system, with sodium steam centers to high pressure, with powers from 150 to 400 Watts. Besides to diminish the consumption of electrical energy considerably.

9[edit]HORTONG, electron orbit energy generator HORTONG, generator of the orbit of the electron (http://world.altavista.com/babelfish/trurl_pagecontent?lp=es_en&trurl=http%3a%2f%2fwww.et3m.com%2fserv01.htm) - translated by AltaVisa from http://www.et3m.com/serv01.htm; with editorial clean-up by Sterling D. Allan

[This technology] presents an important alternative to the generation problems and transformation of electrical energy that faces humanity at this time. HORTONG is an electronic circuit that when connected to an electrical system is said to increase its efficiency considerably. The design of this electronic circuit is special for each application and power, not mattering that are systems of direct current (CD) or alternating current (CA). Father of the contemporary Physics, the Dr Albert Einstein, in one of his theories says to us that it is possible to obtain great amounts of energy being started off of small amounts of mass (E=mc2), but never said or assured that the fission or nuclear fusion was the only means to obtain it. HORTONG (E??=mc2) is a new process of transformation of energy with no need to use radioactive material to obtain the loosening of energy of the orbit of the electron. The atomic theory demonstrates that a kilogram of mass contains ninety thousand trillions of Joules, to 1 kg = 9.0x1015 J, and if we transformed that kilogram of mass into Watts-hour we have by each kilogram of mass twenty-five billion KiloWatts-hour, 1 kg = 2.5x1010 KWH. In our circuits of low power we used 10 mg of mass gallium-cuarzo silicio-germanium-arcenuruio; those 10 mg of mass give to two hundred fifty million KiloWatts-Hora (250000,000 to us KWH) and if we used this circuit to feed a motor on a KW of consumption, it will be in continuous operation during 28.530 years, (E=mc2), (E??=m c2). This one investigation is well situated to count as an economically profitable, viable power alternative. There ist still much to research and development remaning, but already we have seen some circuits that have had good results, obtaining substantial savings of energy. [amount not given]

[edit]KeelyNet Comments The following statements were posted at Jerry Decker's http://keelynet.com/ [edit]

03/28/06 Stefan Hartmann writes "Adolf Schneider (from Net-Journal Magazine) in Switzerland is holding a conference with these guys from et3m soon. They want to be distributor for Switzerland (Europe) for this technology. Until the conference they keep all other things quiet," he wrote. / Myron W. Evans work, focuses on atomic level physics, including "development of energy ex vacuo, theory and patented devices, and the theory of general unified field theory of sub atomic particles, with applications to nuclear waste stabilization." (Looking at the Free Energy Chip image which shows 4 disconnected meters, then 4 connected meters attached to a 'black box' which is apparently intended to operate the two AC fans. I doubt the 'black box' is extracting AC from the vacuum unless it is rectified and stored as DC to be fed into an internal INVERTER circuit which would provide 60hz for the fan motors. Unfortunately, the site provides no details as to power produced or components used. - JWD)

[edit]03/27/06 - Free Energy Chip I received this information from Duncan at Nexus Magazine. {...} The theoretical concepts behind the invention seem to be originating from research by a man named Myron Evans. He is said to have finally come up with a unified field theory, basing his own research on Einstein and Elie Cartan. Here's a website, that discusses him: http://www.atomicprecision.com/ It seems that the invention has come a long way, definitely not out of nowhere. There's a company, that is currently drumming up people worldwide to throw in venture capital into this, named EAVCF/Euro-American Venture Capital Federation, based in Oregon, USA. The colleagues from Net Journal (http://www.borderlands.de/inet.jrnl.php3), a magazine around all things with free energy, seem to be heavily involved in the European marketing. They could probably tell you more. They might also be knowledgeable about where you could find a contact in the Southern Hemisphere. [edit]

10

Skeptics Free Energy Chip - Refutation of Evans claims &

comments/notes (http://72.14.203.104/search?q=cache:KNH92Pm_ewwJ:www.mathematik.tu-darmstadt.de/~bruhn/Refutation_of_EVANS_REFUTATION.pdf+evans+refutation+pdf&hl=en&ct=clnk&cd=1)

[edit]Contact Tecnolo'gica Company of the Third Mexico Millenium. (et3m) Balearic Islands # 110-A, Col. Lindavista, C.P. 37300, LEON, Gto. MEXICO International calls Telephone and Fax:+52(477)-773-78-05 Calls within the Mexican Republic: (477)-773-78-05 [edit]

See also Directory:Nuclear

- Other Directory listings- PESWiki home page Retrieved from "http://peswiki.com/index.php/Directory:Hortong_Electron_Orbit_Energy_Generator"

11

Directory:Rauen Environmental Heat EngineFrom PESWiki

A Top 100 Technology

Environmental Heat Engine The Superclassical heat engine of Ken Rauen is designed to be able to tap the heat of the environment as its heat source. It is based upon the experimental evidence of the Proell effect, a macroscopic Maxwells Demon.

About [edit]

Official Website None yet. This present index page is the most thorough coverage available so far as we know.

[edit]Overview The Second Law of Thermodynamics (2LT) has never been proven to be universal, that heat transformations must always go "downhill" or create entropy. The presumed universality of the 2LT is based upon a statistical truth, a description of particle collisions based upon the kinetic theory of heat (KTH). Not all particle collisions need be random. When a series of particle collisions has a net motion in any direction, it is called work, such as when a gas moves a piston. Piston motion need not be present for work to occur. Heat is transferred from a low temperature via particle collisions to a higher temperature without energy input, relying just upon elastic collisions according to the KTH, with work as the transfer medium, when a gas is displaced through a regenerator under constant volume conditions; this is the Proell effect. The patented engine cycles apply this phenomenon. In constant volume displacement cooling, part of the engine is refrigerated without work input, and this internal heat sink is used to advantage. The waste heat flows of the engine fall into this sink and are recycled to the high temperature of the engine in the next cycle. Depending on how the displacement and regeneration are done, either partial or complete recycling is accomplished. Carnot's Theorem, the mathematical equation of theoretical maximum engine efficiency determined by a ratio of the highest and lowest absolute temperatures of an engine, and based upon the statistical mechanics of the 2LT, is sidestepped, allowing higher engine efficiencies, and even the use of ambient heat as the heat input. The patent shows practical application in definitive cycles with some mechanical embodiment, and the mathematical proofs show the full thermodynamic analysis with state variables, enough to satisfy the most rigorous academic scrutiny. -- Ken Rauen, June 28, 2004

12

[edit]NERL Prototype Engine

An engine was built in 2001 at New Energy Research Laboratory, in Bow, New Hampshire. It resembles a Stirling engine. Funding was small, the engine was designed by Ken who is just a chemist, and mechanical problems prevented its full operation. Promising data was obtained, as seen in the pressure plot of the engine. The cycle is a 3-step cycle, and the pressure fluctuations

[edit]The Science Behind the Invention The non-random thermal energy transfer of the Proell effect circumvents the thermal randomness basis of the Second Law. The constant volume process with displacement and regeneration has heretofore unrecognized energy flows. The Stirling engine doesnt have a net Proell effect because there are two constant volume steps that cancel each other. The Superclassical has only one constant volume step. The cycle is constant volume cooling, adiabatic compression, and constant pressure expansion. More heat is recycled in the constant cooling stroke than classical thermo recognizes. Carnot is exceeded. Math proofs with state variables are available.

Carnot Excedence -- Patent and Mathematical Proofs (http://pureenergysystems.com/academy/CarnotExcedence/) (by Kenneth Rauen) - Super-efficient thermodynamic exchange possible.

15-page Primer by Ken Rauen (http://pureenergysystems.com/academy/CarnotExcedence/CarnotExcedence_PrimerJuly04.doc) - Above and Beyond Carnot: How and why Carnot's Theorem can be circumvented. Low temperature heat sources may be efficiently converted to work, and environmental heat can run heat engines.

A Mathematical Proof of Carnot Excedence: Number 3 (http://pureenergysystems.com/academy/CarnotExcedence/MathProof3/Math_Proof_3_postpatent.doc) (doc) - "This proves Carnot can be exceeded."

A Mathematical Proof of Carnot Excedence: Number 5 (http://pureenergysystems.com/academy/CarnotExcedence/MathProof5/Math_Proof_5_postpatent.doc) (doc) - "This proves 100% efficiency is possible"

13

[edit]US Patent Ken was awarded US patent number 6,698,200 B1: Efficiency thermodynamic engine (http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO2&Sect2=HITOFF&p=1&u=/netahtml/search-bool.html&r=1&f=G&l=50&co1=AND&d=ptxt&s1=6,698,200&OS=6,698,200&RS=6,698,200) for the Superclassical engine (SCE). (Download PDF (http://pureenergysystems.com/academy/CarnotExcedence/CoolEng_Patent.PDF))

FIELD OF THE INVENTION

The present invention relates to thermodynamic heat engines, in particular to improve efficiency thermodynamic heat engines of at least three cycle steps.

ABSTRACT A novel thermodynamic engines including a piston operating on a compressible fluid in a thermally insulated volume, which also includes a movable displacer which selectively divides the internal volume between a warm and a cold side, and a regenerator through which the fluid from the selectively divided volume passes and transfer its heat to or receives heat from, wherein the piston and displacer are each periodically moved in various complex motions according to the present invention to provide efficiency higher than Carnot efficiency. The resulting novel structures and methods, generally referred to as "Superclassical Cycle" engines, incorporate constant volume cooling and aspects of the "Proell Effect" (relative to cooling) to achieve improved efficiencies wherein the gas temperature on the cold side of a fluid displacer is below the lowest regenerator temperature due to "self-refrigeration." Thus according to the apparatus and methods according to the present invention, the traditional principals of the Second Law is further refined and higher operating efficiencies achieved.

[edit]Proell Effect Infinite Energy Article The best description of the Proell effect is found in the publication of the research in Infinite Energy magazines Issue 52 (http://www.infinite-energy.com/iemagazine/issue52/index.html).

[edit]Present Disposition Ironically, September 11th, 2001 ended the funding for the SCE. Since then, all hands-on work has stopped. Ken continues independent theoretical work and designs new mechanical configurations. Better mechanisms are ready for prototyping, but funding and facilities are not currently available. Commercialization is possible, despite the invention still being deep in R&D. The science is done and the basic technologies have been identified and are low tech. Other patents can be filed for the technology. Good mechanical engineering and business administration are the biggest needs.

14

[edit]Related Inventions by Rauen Ken Rauen has other inventions that are Second Law-breakers, some of them experimentally verified. The details are too lengthy to be enumerated here. One worth a short mention is another version of the SCE that does not run on ambient heat, but instead can be used with a passive solar collector at an estimated 50% efficiency. [edit]

Related Inventions/Concepts by Others

Ghosh Energy from Atmospheric Heat - Pranab Jyoti Ghosh seeks assistance for building a working prototype of a technology that would produce electricity from atmospheric heat, based on combining a number of well-proven concepts.

Maxwell's Pressure Demon and the Second Law of Thermodynamics (http://www.execonn.com/maxwell/maxwells_demon.html) - John Marshall Dudley describes his solid-state experiments in extracting electricity from temperature differentials -- from the molecular motion of molecules of air. "Maxwell's demon - An imaginary creature who is able to sort hot molecules from cold molecules without expending energy..." (Infinite Energy; Mar/Apr, 2006)

US 7019412 -- Power generation methods and systems (http://www.freepatentsonline.com/7019412.html?highlight=7019412) - A closed loop system for generating mechanical energy at high efficiencies. The system can have a heating source, a superheater, an expander, a receiver, an absorber, a desorber, and regenerator with pumps and controls. The superheater heats a working fluid (a refrigerant or steam). A positive liquid/vapor expander expands a low temperature refrigerant, or steam vapor to the saturated state (having both liquid and vapor parts) utilizing a low-pressure sub-atmospheric exhaust sink. An absorber, generates a low-pressure sub-atmospheric sink using chemosorption which involves the exothermic reaction/absorption of ammonia refrigerant in water. The desorber is used to reconstitute inlet vapor (for reuse) and the regenerator recovers heat generated by chemosorption. The system can meet electrical power needs for residences, businesses or office buildings. The system can supply electrical energy to power grids, and can be an alternative power generation plants. (Issued Mar. 28, 2006)

[edit]Bio of Ken Rauen

Ken Rauen - bio page (http://pureenergysystems.com/about/personnel/KennethMRauen/) [edit]

Contact Ken Rauen can be reached at ken.rauen@pesn.com. He will be attending the American Association for the Advancement of Science Pacific Division annual meeting in San Diego in June, where there will be a symposium on the Second Law of Thermodynamics. If opportunity arises from lecture cancellations, he will present a paper or two. [link to http://www.sou.edu/aaaspd/SanDiego2006/Index.html] [edit]

See also Directory:Thermal Electric

- Other Directory listings

15

- PESWiki home page Retrieved from "http://peswiki.com/index.php/Directory:Rauen_Environmental_Heat_Engine"

16

Directory:Revetec Cam-Drive EngineFrom PESWiki

A Top 100 Technology

The Revetec cam-drive engine uses a pair of counter-rotating scissor cams instead of a crankshaft. The result is three times more torque than a conventional engine, and an overall engine efficiency up to 50% more. REVETEC Limited is a design engine company and developer of the "Controlled Combustion Engine" (CCE). The CCE is an internal combustion engine that is lighter, cleaner and more powerful than equivalent conventional engines, and cheaper to manufacture, due to fewer components.

Table of contents 1 About1.1 Official Website1.1.1 Images1.1.2 Revetecs Worldwide clients/partners1.2 Engine Description1.3 Advantages1.4 Patents1.5 Validations1.6 Applications1.7 Manufacturing1.8 Licensing1.9 In the News1.10 Comments1.11 Contact2 See also[edit]

About

This is a new page. You are welcome and invited to help us expand its contents. Once the page has become more mature and adequately populated, this notice can be removed.[edit]

Official Website http://www.revetec.com/

Description (http://www.revetec.com/?q=node/23) Revetec Engine Design (http://www.revetec.com/?q=taxonomy/term/19)

History of Revetec (http://www.revetec.com/?q=node/24) Company Overview (http://www.revetec.com/?q=the-company) Investor Info (http://www.revetec.com/?q=investor-info) News (http://www.revetec.com/?q=latest-news) Contact (http://www.revetec.com/?q=contact)]

[edit]Images

Gallery (http://www.revetec.com/?q=gallery) Videos (http://www.revetec.com/?q=videos) 3D rendering (http://www.revetec.com/?q=node/52) in crank case (http://www.revetec.com/?q=node/59) finished engine (http://www.revetec.com/?q=node/64) dropping engine into car (http://www.revetec.com/?q=node/54)

17

[edit]Revetecs Worldwide clients/partners

Orbital (http://www.orbitalcorp.com.au) Hudson (http://www.rewaco.com.au) Pushkaraj Enterprises (http://www.pushkaraj.com)

[edit]Engine Description from http://www.revetec.com/?q=node/23

The REVETEC Engine design consists of two counter-rotating trilobate (three lobed) cams geared together, so both cams contribute to forward motion. Two bearings run along the profile of both cams (four bearings in all) and stay in contact with the cams at all times. The bearings are mounted on the underside of the two inter-connected pistons, which maintain the desired clearance throughout the stroke. The two cams rotate and raise the piston with a scissor-like action to the bearings. Once at the top of the stroke the air/fuel mixture is fired. The expanded gas then forces the bearings down the ramps of the cams spreading them apart ending the stroke. The point of maximum mechanical advantage or transfer is around 10deg ATDC (the piston moving approximately 5% of its travel) making the most of the high cylinder pressure. This compares to a conventional engine that reaches maximum mechanical advantage around 40deg ATDC. (after the piston has moved through 40% of its travel, losing valuable cylinder pressure). The effective cranking distance is determined by the length from the point of bearing contact to the centre of the output shaft (NOT the stroke). The dual bearings contact the two cams in the opposite side which cancels the side forces out. The piston assembly does not experience any side force which will reduce wear and lubrication requirements at the cylinder contact. This also reduces piston shock to a negligible amount making ceramic technology suitable. One module which comprises of a minimum of five moving components, produces six power strokes per revolution. Increasing the number of lobes on each cam to five produces ten power strokes without increasing the number of components.

See also Revetec Engine Design (http://www.revetec.com/?q=taxonomy/term/19) Theory (http://www.revetec.com/?q=taxonomy/term/42)

[edit]Advantages from http://www.revetec.com/?q=taxonomy/term/19 Summaries of CCE advantages are as follows:

approximately one quarter the size and weight of a conventional engine (for similar applications) combined with improved output substantially increases power/weight and torque/weight ratio.

fewer moving and total components. As a result of fewer components, more easily manufactured than conventional engines.

identical cylinder head assembly (top end) to conventional engines. Most existing head technology can be either adapted or utilised.

Flexible design - can be four-stroke, two-stroke, petrol, diesel or gas, natural of forced aspiration. Eliminated irregularly reciprocating components such as connecting rods. Output shaft can be run in either direction if multilobed cams with symmetrical lobes are employed. All rotational forces are counteracted via the counter rotating cam eliminates the need for a heavy

flywheel. Torque and power output can be varied using a fixed capacity and piston stroke. The CCE can be designed to operate at greatly reduced operating speeds while delivering high torque

output. Substantial reduction in stroke reduces heat loss through cylinder wall. Extended piston dwell is possible because engine design allows a lower than normal compression ratio to be

used reducing power loss from compression cycle. Maximum mechanical advantage can be applied to output shaft at only 10 degrees ATDC utilising high

cylinder pressure early in the stroke, compared to around 60 degrees ATDC for conventional engines. Lower emissions can be achieved due to increased control over combustion.

18

Extremely low idle speed due to increase in mechanical efficiency at the top of the stroke. Little or no bore contact/piston side thrust, which reduces wear on cylinder bore. Can have different port timing on compression stroke than power stroke allowing better control two-stroke). Lower centre of gravity. Due to controlled piston acceleration rates the CCE reduces engine vibration. A hollow output shaft can be utilised for specialty applications, such as peristaltic pumps.

[edit]Patents Revolution Engine Technologies Pty Limited (a wholly owned subsidiary of Revetec Limited) holds patents or has made patent applications for the CCE design in 21 countries, including the United States of America, Europe, Australia, China, the United Kingdom and Japan. The beneficial ownership of the patents and patent applications was assigned to Revetec on 14 September 2005. (Ref. (http://www.revetec.com/?q=taxonomy/term/12)) [edit]

Validations Engine Testing Progress Report Dec. 2005 (http://www.revetec.com/files/Testing-Next-Phase.pdf)

"Leap had conducted an independent analysis which shows that the REVETC CCE engine can produce about three times the torque compared to a conventional engine with crankshaft for a given piston pressure profile." [edit]

Applications from revetec website The advantages of Revetecs engine technology can be applied to most internal and external combustion engines for use in motor vehicles, trucks, buses, motorcycles, pumps and generators, light aircraft engines, diesel and marine engines. The CCE integrates well with existing power plants and can utilise almost all existing engine technology with increased efficiency. The CCE engine is extremely well suited for high torque applications such as generators, machinery and light aircraft. [edit]

Manufacturing Revetec has completed its design on its prototype, which could now be adapted by our customers to meet their specific requirements. (Ref (http://www.revetec.com/?q=the-company)) "The Company now (2003) has a Joint Venture Agreement with Osman to produce engines in China in the near future." (Ref (http://www.revetec.com/?q=node/24)) [edit]

Licensing http://www.revetec.com/?q=taxonomy/term/17 "Revetecs business model is simple it proposes to licence its technologies to combustion engine producers worldwide." [edit]

In the News http://www.revetec.com/?q=latest-news

Big Shot (http://www.revetec.com/?q=node/108) - One of India's largest industrial conglomerates and car manufacturers, the Mahindra Group, will test a new-generation, which may lead to its commercialisation.(The Australian; Mar. 29, 2006)

Motorists to Benefit From Revetecs new Engine Design (http://www.australianinvestor.com.au/Magazine.asp?id=1900) (Australian Investor subscription required) [copy on company site (http://www.revetec.com/?q=latest-news&from=10)]

Fuel-saving breakthrough (http://www.revetec.com/?q=node/81) - (Sydney Sunday Telegraph October, 2 2005)

[edit]Comments Enter your comments here. [edit]

Contact http://www.revetec.com/?q=contact REVETEC Holdings Limited ACN: 115 621 317 PO Box 8203

19

Gold Coast Mail Centre Gold Coast QLD Australia 9726 Phone International: +61 7 5531 6059 Fax International: +61 7 5531 6997 Email mailto:admin@revetec.com?subjec=Revetec_featured_at_PESWiki.com (mailto:admin@revetec.com?subjec=Revetec_featured_at_PESWiki.com) [edit]

See also Directory:Engines

- Other Directory listings- PESWiki home page Retrieved from "http://peswiki.com/index.php/Directory:Revetec_Cam-Drive_Engine"

20

Directory:SunConeFrom PESWiki

SunCone Solar Energy Thermal Concentration System

Made of an aluminized film (e.g. nylon or Mylar) with a transparent film over the end facing the sun, the SunCone, by Barnabus Energy, maintains its shape through air pressure. The system is expected to be less expensive and labor-intensive than standard parabolic dish or trough design and require less precise placement.

Table of contents 1 About1.1 Official Website1.2 Overview1.3 Disadvantage1.4 Patent1.5 Advantages1.6 Prototype1.7 Product Details1.7.1 Alternative Designs1.8 Cost1.9 In the News1.10 Contact2 See also[edit]

About [edit]

Official Website http://www.barnabusenergy.com/en/projects/suncone.asp

[edit]Overviewfrom http://www.barnabusenergy.com/en/projects/suncone.asp

Focusing solar energy to high intensity can provide high temperatures at the target (focal point) in order to drive high-efficiency heat engines. Parabolic trough reflectors have been used effectively in this role. Parabolic dish mirrors can achieve even higher temperatures.

The problem with parabolic dish mirrors is that considerable precision is required in their construction and maintenance. The mirror facets are fairly expensive to manufacture. Each facet (approximately one square meter) must be mounted on a very rigid structure and must be precisely aligned to keep the sun's image on the target. About once a week, each mirror must be re-aligned. For a 100 square meter dish (1 m 2 per facet), 100 mirrors must be realigned. Realignment can be done by electronically-controlled actuators, but that requires two motors per mirror facet in addition to sophisticated electronics, thus adding to the expense of the solar collector.

Another problem with parabolic dish reflectors is that they have been known to start fires in grass when accidentally pointed in the wrong direction. They can also cause damage to human eyes if the mirror points in a direction that causes sunlight reflection toward a person or if the person looks at the target (focal point). A new system called Suncone provides an inexpensive method of producing high-temperature solar energy collection using plastic films. Figure 1 (http://www.barnabusenergy.com/en/projects/images/suncone_large_edited.jpg) shows an artist's conception of the Suncone solar collector. Like the parabolic dish, it must be pointed toward the sun but

21

requires less precision than a parabolic dish or parabolic trough. Air pressure within the enclosure maintains rigid configuration.

[edit]Disadvantage from http://www.barnabusenergy.com/en/projects/suncone.asp The problem with this design is that the entire cone is supported by its narrow end. Thus, wind could easily blow the cone to the side. If guy wires are used, they tend to crumple the narrow part of the cone. [edit]

Patent U.S. Patent 4,267,824 (http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO2&Sect2=HITOFF&p=1&u=/netahtml/search-bool.html&r=5&f=G&l=50&co1=AND&d=ptxt&s1=4,267,824&OS=4,267,824&RS=4,267,824) describes an inflatable solar concentrator that consists of a flexible material inflated to the shape of a cone with a transparent end covering. Internal air pressure maintains the shape. [edit]

Advantages from http://www.barnabusenergy.com/en/projects/suncone.asp

Less expensive than other solar concentrators. Lighter weight. Produces high temperatures, similar to parabolic dish collectors. Does not require a boom to support a target at the focal point. Requires less precision in sun orientation than solar dishes or troughs. Less likely to be damaged by large hailstones. Higher efficiency than parabolic trough collectors. Inexpensive to replace plastic films if damaged. Unlikely to start fires on the ground, in contrast to parabolic dish mirrors. Brightly-lit target areas are shielded from human eyes.

Suncone, with regular cones and conical metal reflectors, can achieve about 2,000 C. But operating at 600 C, its solar collection efficiency is about 90%, depending on the geometry. The cones in Suncone do not have to be precisely constructed. Minor flaws are insignificant. Computer simulations were run with SUNCONE in which numerous perturbations of up to a half-centimeter were applied to the cone surface randomly. The energy reaching the target rod was still above 90% of what a perfect cone would provide. The mirror facets on a parabolic mirror must be precise.

[edit]Prototype The prototype is approximately 2 meters long with a 1.5-meter radius at the wide end.

Barnabus Energy Announces SunCone Achieves Critical Milestone (http://www.marketwire.com/mw/release_html_b1?release_id=111163) - Barnabus Energy, Inc. is pleased to announce that its principal contractor on the Suncone project, HYTEC, Inc. of Los Alamos, NM, has achieved a significant milestone in its first phase of work: The construction of the first full-scale prototype, and commencement of engineering analysis. (MarketWire; Feb. 27, 2006)

[edit]Product Details from http://www.barnabusenergy.com/en/projects/suncone.asp

In Suncone, the cones consist of thin aluminized Mylar, Nylon or other film. Instead of having air pressure inside the cone to maintain its shape, air pressure is applied inside a cylindrical enclosure. The conical shape of the interior cones is maintained by tension on the film, since air pressure is pushing upward on the end of the unit. The pressure inside and outside each cone is the same. Air pressure maintains the cylindrical shape of the enclosure, which also consists of a strong plastic. The transparent films that cover the ends of the cones are made of clear plastic, such as Tefzel, which has a transparency of 96%, a tensile strength of over 30,000 psi, is UV resistant, and can tolerate weather for decades. Since Tefzel is rather expensive, other suitable films may be used. Figure 2 (http://www.barnabusenergy.com/en/projects/images/suncone_figure2_large.jpg) shows a cross-sectional schematic of one embodiment of Suncone. The insides of the cones are aluminized for high reflectivity. The outsides of the cones are coated by flat black, which radiates heat well. Computer simulations show that the cone material remains cool, since the inside reflective layer allows little solar energy to enter the plastic, but the outside black layer radiates the heat away. The enclosure should be clear so that it allows the radiant energy to pass through or should be black plastic or coated with flat black so that it

22

absorbs the radiant heat from the cones and radiates the heat away on the outside. Since the surface of the enclosure is parallel to the sun's rays, it does not get hot from direct sunshine. The sun's rays are concentrated on the target rod, which may have channels inside for the flow of water or other working fluid. The target rod should have a cylindrical glass tube around it to reduce convective heat loss, and the glass tube should be evacuated. Since the rod will get quite hot, it is surrounded by a metal reflector. The plastic cone is attached to the metal reflector with an insulating connector. The metal reflector and the target rod are attached to the base, which is shown as a solid circular cylinder, but it may be any suitable assembly of metal beams. The structure does not have to be as robust at that of a parabolic dish, since it does not have to be as rigid and since it does not have to support a long metal boom that holds a heavy target at the end. In Suncone, the heat absorption is located adjacent to the base. (Some important details of the construction are not shown in these figures). Figure 3 (http://www.barnabusenergy.com/en/projects/images/suncone_figure3_large.jpg) shows a top-view schematic of Suncone with seven cones. Note the spaces between the cones that appears to be wasted area for solar energy collection. The cones could be extended so that the total area is used, but the upper end would not be circular, which would not hurt the performance but would make construction more expensive. The evacuated glass tubes that surround the target rod not only improve efficiency by reducing heat loss, but they also prevent hot convective air currents from flowing from the target rods to the plastic films. Figures 2 and 3 show schematics of assemblies that have only a few cones. If the cones are 2 meters (6.56 feet) long with a radius of 1.5 meters at the upper end, it would require 7 cones to provide a total of 50m2 of solar collection. This would be similar to the arrangement of Figure 3 with a central cone surrounded by 6 other cones. Of course, more cones can be added. For photovoltaic applications, the rods could be larger in diameter and coated with photovoltaic films. The metal reflector might also be covered with photovoltaic films and would be conical in shape. The concentration of light would provide higher energy collection per unit area of photovoltaic material. It should be noted that the target rods are completely shielded from ground observers, so that eye damage to passersby is impossible. If Suncone is accidentally pointed toward the ground, it will not be pointed toward the sun, so that it cannot start a grass fire. A parabolic reflector, on the other hand, can intercept sunlight even when it is not pointed directly toward the sun, and the reflected light can ignite fires on the ground. Suncone units could be mounted in parking lots above cars to generate electricity for nearby buildings without concern for the safety of people or property below them. They could also be mounted on tops of buildings. Engineers would be reluctant to place parabolic reflectors in these locations. For high wind conditions, cables or cords extending from the base to the top can be reeled in to draw the top downward while the air pressure is reduced. The plastic film portion of the unit would be withdrawn into a sturdy cylinder surrounding the lower part of the enclosure to shield against the wind. Even if the plastic materials are destroyed, they are inexpensive to replace.

[edit]Alternative Designs from http://www.barnabusenergy.com/en/projects/suncone.asp

The design illustrated in Figure 5 (http://www.barnabusenergy.com/en/projects/images/suncone_figure5_large.jpg) would encase each cone with a cylindrical plastic film enclosure. Air pressure would be supplied to each enclosure, which would ensure that the cone is tight and circular. The enclosure would sustain the force produced by the air pressure on the clear window, thus eliminating large stress on the narrow end of the cone. Each of these units, incorporating the enclosure, cone, transparent window, and base sheet could be manufactured in a factory and assembled onto the base in the field. After each unit is installed, it would be attached to adjacent units by adhesive or Velcro. An additional enclosure film could be wrapped around the entire assembly. External and internal tether cords or cables (guy wires) will maintain structural stability. Figure 6 (http://www.barnabusenergy.com/en/projects/images/suncone_figure6_large.jpg) is an embodiment of the Suncone in which the sunrays are reflected into a hohlraum cavity, in which the target rod is placed. The interior walls of the hohlraum chamber are coated with a light-absorbing layer. It absorbs solar energy and becomes hot. The cooling fluid that flows through the target rod can also flow through channels in the hohlraum chamber wall to be heated. Alternatively, the fluid can flow through pipes (not shown) that are welded to the outside of the hohlraum chamber. A hohlraum chamber tends to trap radiant heat. Some of the radiation from the wall on one side is radiated to the opposite wall or to the target rod. Likewise, much radiation from the target rod flows to the chamber walls. Insulation (not shown) on the outside of the chamber prevents loss of heat. The advantage of this embodiment is that it is quite insensitive to the accuracy of a tracking mechanism that points the device toward the sun. In this design, the cone is divided into two reflective film cone frustums in

23

order to more closely match an exponential generatrix for the collector shape. A circumferential rigid ring holds the reflective cone frustums in place. The top of the upper cone frustum is held in place by air pressure on the transparent cover (not shown, but like that in Figure 2). The bottom of the lower cone frustum is connected to the metal reflector, whose shape is defined by an exponential generatrix. Reflected sunlight passes through a glass window, which has the purpose of reducing convective heat losses. The cavity can be evacuated for further reduction in heat losses.

[edit]Cost from http://www.barnabusenergy.com/en/projects/suncone.asp

Hydro-Tech quoted the price for their aluminized Mylar, with a reflectivity of 0.95, at 20 cents per square foot. The material cost for the cones in the above example of a 50-m2collector would be under $100. Transparent windows would cost $500. The enclosure and other plastic materials would cost $800. Total cost for plastic materials is $1,400. The metal reflectors can be thin polished aluminum. In mass production, they can be pressed into shape, so that the cost for seven of them would be $400. The table below provides an estimate to the cost of a completed Suncone unit with 50 square meter solar collecting area.

Table 1 - COST FOR A 50-SQUARE METER SUNCONE UNIT Plastic materials $1,400 Stainless steel target rods and piping 700 Base structural materials 600 Metal reflectors 400 Hohlraum chambers 400 Pivot and foundation support 1,500 Miscellaneous hardware 800 Assembly (mass production) 1,100 - - - - Total $6,900

This would provide an efficient solar collecting system with a cost of $139 per square meter of collection area. This does not include the cost of a sun-tracking system. Presently, trough collectors (which are not as efficient as Suncone collectors) are running at about $250 per square meter, and dish collectors are about $400 per square meter.

[edit]In the News

Inflatable SunCone boosts efficiency and lowers price (http://renewableenergyaccess.com/rea/news/productstory;jsessionid=F6EF23ECE5BF2C562168392B6538368A?id=44308) - Made of an aluminized film (e.g. nylon or Mylar) with a transparent film over the end facing the sun, the SunCone, by Barnabus Energy, maintains its shape through air pressure. (Renewable Energy Access; Mar. 9, 2006)

Barnabus Energy Announces SunCone Achieves Critical Milestone (http://www.marketwire.com/mw/release_html_b1?release_id=111163) - Barnabus Energy, Inc. is pleased to announce that its principal contractor on the Suncone project, HYTEC, Inc. of Los Alamos, NM, has achieved a significant milestone in its first phase of work: The construction of the first full-scale prototype, and commencement of engineering analysis. (MarketWire; Feb. 27, 2006)

[edit]Contact Barnabus Energy, Inc. 514 Via de la Valle, Suite 200 Solana Beach, California 92075 Investor Relations 1-800-250-2610 info@barnabusenergy.com [edit]

See also Directory:Solar

- Other Directory listings- PESWiki home page Retrieved from "http://peswiki.com/index.php/Directory:SunCone"

24

Directory:Walter Torbay's Magnetic TransgeneratorFrom PESWiki

Magnetic Transgenerator prototype shown powering a light.Inventor from Argentina presents a free energy device via the repelling (ricochet) power of magnets, the deviation of the lines of magnetic force, and a complex mechanical system for controlling the acceleration, speed and power.

"It generates energy stable, free, does not contaminate the [environment], does not need maintenance, lasts [a long] time, the power source is not degraded and works as much in mainland, the air, under the air or in the deep space". (Ref.)

The device is alleged to be quiet, with very low friction, hence low maintenance, so that it could run for 50 years without inturruption. Present disposition unknown, and not stated on company website.

Table of contents 1 About1.1 Official Website1.1.1 English Translation1.2 Applications1.3 Patent1.4 Mechanism1.5 Prototypes1.6 In the News1.6.1 2006 =1.6.2 Pre 20061.7 Inventor1.8 Contact2 See also[edit]

About

This is a new page. You are welcome and invited to help us expand its contents. Once the page has become more mature and adequately populated, this notice can be removed.[edit]

Official Website http://club.telepolis.com/LICYTA/index.htm (is in Spanish)

[edit]English Translation Translation of web pages by Google

Home Page of ICYTI -- Independent Scientific Investigations and Technologies (http://www.google.com/translate?u=http%3A%2F%2Fclub.telepolis.com%2FLICYTA%2FGALERIADEFOTOS.htm&langpair=es%7Cen&hl=en&ie=UTF8)

Photos of Prototypes (http://www.google.com/translate?u=http%3A%2F%2Fclub.telepolis.com%2FLICYTA%2FGALERIADEFOTOS.htm&langpair=es%7Cen&hl=en&ie=UTF8)

Media coverage of the technology from 2004 - 2006 (http://www.google.com/translate?u=http%3A%2F%2Fclub.telepolis.com%2FLICYTA%2FGALERI

25

ADEFOTOS.htm&langpair=es%7Cen&hl=en&ie=UTF8) Intentions (http://www.google.com/translate?u=http%3A%2F%2Fclub.telepolis.com%2FLICYTA%2FGAL

ERIADEFOTOS.htm&langpair=es%7Cen&hl=en&ie=UTF8) - Objective is to improve the quality of human life by collaborating with local scientists, and to dissemanating the knowledge to any nation, municipal organization, university, scientific organization, or non governmental organization.

[edit]Applications

motive power for automobiles, airplanes, boats, submarines illuminate cities heating

[edit]Patent Patented in Argentina in August of 2004 and with international patent "in proceeding". Called "magnetic transgenerador" and works by ricochet "taking advantage of the magnetic property equal poles and the deviation of lines of magnetic force", said the investigator. (Ref. (http://club.telepolis.com%2FLICYTA%2FGALERIADEFOTOS.htm&langpair=es%7Cen&hl=en&ie=UTF8)) [edit]

Mechanism The system uses Neodymium magnets of 24,000 Gauss, and allegedly can generate 2,500 watts. The generator uses a principle similar to the one of the magnetic trains, although in these the magnetism is generated in electrical form, whereas the one of Torbay uses the force of attraction of the magnet in rest, which is why the cost of energy generation is null.

26

[edit]Prototypes The first prototype was constructed in aluminum and was taken in 2004 to the Commission of Scientific (CIC) of the Buenosairean government, where studies began on the invention. Conrado Gonzlez, member of the directory, confirmed that the invention is consideration of this organism. A new prototype, made with rudimentary materials but that have been serving to show the operation principle, were constructed for three months by Torbay and remain in their factory-laboratory of Sea of the Silver. (Ref. (http://club.telepolis.com%2FLICYTA%2FGALERIADEFOTOS.htm&langpair=es%7Cen&hl=en&ie=UTF8)) [edit]

In the News Media coverage of the technology from 2004 -

2006 (http://www.google.com/translate?u=http%3A%2F%2Fclub.telepolis.com%2FLICYTA%2FGALERIADEFOTOS.htm&langpair=es%7Cen&hl=en&ie=UTF8) - ICYTI compilation. Many of the links are dead.

[edit]2006 =NEWSPAPER REASON (BUENOS AIRES) 8/3/06

http://old.larazon.com/diario_lr/2006/03/08/2-1154904.htm http://old.larazon.com/diario_lr/2006/03/08/2-1154903.htm http://www.larazon.com.ar/diario_lr/hoy/2-1154903.htm

NEWSPAPER CRONICA (BUENOS AIRES) 9/3/06 http://www.cronica.com.ar/article/articleview/1141767030/1/6/

NEWSPAPER OF WHOSE (PROV. OF SAN JUAN) 9/3/06 http://www.diariodecuyo.com.ar/home/new_noticia.php?noticia_id=60746

NEWSPAPER HOY(LA SILVER) 11/3/06 http://www.diariohoy.net/notas/verNoticia.phtml/html/219495/ NEWSPAPER THE ELEVEN DIGITAL(PROV. BETWEEN RIOS) http://www.eloncedigital.com.ar/especiales/nota.asp?id=32852 DERF (AGENCY OF THE NEWS OF THE PROVINCE OF SANTA FE)

http://www.derf.com.ar/despachos.asp?cod_des=66196 TELAM (NATIONAL AGENCY OF THE NEWS) 7/3/06 18:20HS

http://www.telam.com.ar/index_informaciongeneral.asp http://www.telam.com.ar/contenidos_cartelera.htm

[edit]Pre 2006

They invent a magnetic system to generate energy with cost zero (http://club.telepolis.com%2FLICYTA%2FGALERIADEFOTOS.htm&langpair=es%7Cen&hl=en&ie=UTF8) - A scientist of Sea of the Silver invented a magnetic system that produces energy without cost, since it does not use fuel some. He would have a cost of 150 dollars and "he would allow that a house is supplied of electricity indefinitely". (Elonce; date not given [not current date, as shown])

Free and nonpolluting energy (http://club.telepolis.com%2FLICYTA%2FGALERIADEFOTOS.htm&langpair=es%7Cen&hl=en&ie=UTF8) - A group of scientists and Argentine investigators developed and patented a discovery that consists of a complex device that would manage to transform magnetic energy into stable mechanical

27

energy. (Rio Negro; September 20, 2004) (Title

obscured) (http://club.telepolis.com%2FLICYTA%2FGALERIADEFOTOS.htm&langpair=es%7Cen&hl=en&ie=UTF8) - The generator with cost zero invented by Walter Torbay is being reviewed for possible referral to a scientific committee to certify or to analyze porqu of the operation (Laraz...; date not shown)

A system that produces energy without costs (http://club.telepolis.com%2FLICYTA%2FGALERIADEFOTOS.htm&langpair=es%7Cen&hl=en&ie=UTF8)' - It uses a type of artificial magnet, that could generate a force electrical of 2,500 watts. It was designed in a humble factory. (Diariohoy; date not given)

[edit]Inventor Walter Daro Torbay, studied in the Industrial School of Sea of the Silver and he perfected himself in Industrial Chemistry in the Silver, works with four collaborators in a humble factory of the marplatense periphery. (Ref (http://club.telepolis.com%2FLICYTA%2FGALERIADEFOTOS.htm&langpair=es%7Cen&hl=en&ie=UTF8)) [edit]

Contact ICYTI INDEPENDENT INVESTIGATIONS CIENTIFICAS And TECNOLOGICAS Argentina International Tel.: +54 0223 155-051220 email: mailto:ICYTICONTACTO@YAHOO.COM.AR?subject=Torbay_magnetico_transgenerator_featured_at_PESWiki.com (mailto:ICYTICONTACTO@YAHOO.COM.AR?subject=Torbay_magnetico_transgenerator_featured_at_PESWiki.com) Site says to expect responses to take some time, as the number of inquiries is great. [edit]

See also Directory:Magnet Motors

- Other Directory listings- PESWiki home page Retrieved from "http://peswiki.com/index.php/Directory:Walter_Torbay's_Magnetic_Transgenerator"

28

OS:CD MotorFrom PESWiki

You are here: PESWiki > Open Source > CD Motor

CD Motor Open Source Project

This page concerns an experiment that was developed between Sept 2001-2004 under the direction of Tim Harwood in an Egroup. Inspired by the claims of Robert Adams and his exotic pulsed motor technology, it was widely replicated. Adams, living, is careful not to let others speak on his behalf, so it should be made clear that the CD motor was developed wholly independently of Mr. Adams. The motor instructions posted herein are compiled by Tim Harwood from that project. He says that when followed they will result in a motor that has been demonstrated to manifest unexplained thermal properties (i.e. drops in temperature below ambient) and back-emf surges in excess of 80% of input. However, none have yet been able to advance to the point of having a self-running system with power left over to use. It it hoped with improved circuitry, core materials, and a 240v apparatus input, the 100%-plus level can be achieved. The adequacy of these plans now posted at PESWiki to provide sufficient information to build a replica as described has not yet been verified by a successful replication. A version of the plans presented elsewhere, did result in successful replications.

Table of contents 1 About

1.1 Overview

1.1.1 What to expect1.1.2 Caution1.1.3 Disclaimer1.1.4 FAQ

1.2 Assembly

1.2.1 Layout1.2.2 Construction1.2.3 Alternative layouts1.2.4 Circuitry

1.3 Replications1.4 Discussion

CD Motor

Project home What to Expect FAQ Construction Layouts Circuitry Replications Discussion List (http://groups.yahoo.com/group/pes_CD_Motor/)- Directory:CD Motor- Category:CD Motor- Adams Motor

29

1.5 Contacts

2 See also[edit]

About[edit]

Overview What is unique about the CD Motor is that it was based upon a highly specific theory of operation, based upon the in-register geometry Directory:CD Motor. While previous claims about exotic performance had either been vague, or talked about the battery, the CD motor has always been highly specific. Based upon this tight theory, the goal was to design actual apparatus than conformed to it, while being as cheap and low cost as possible.

[edit]

What to expect

OS:CD Motor What to expect What should you be looking for after you have built the device? [edit]

Caution

ANY experimentation undertaken is performed ENTIRELY AT YOUR OWN RISK. [edit]

Disclaimer

The CD Motor was developed wholly independently of Mr. Robert Adams. [edit]

FAQ

OS:CD Motor FAQ Answers to the most frequently asked questions [edit]

30

Assembly[edit]

Layout

The motor could be said to be roughly based upon a rule-of-5. That is to say the stator head should be about 20% of the cross sectional area of the rotor pm face, and the magnet duty should be kept to about 20%, through the physical spacing of the pms on the rotor. [edit]

Construction

OS:CD Motor Construction Assembly can be done cheaply and simply largely with household items. [edit]

Alternative layouts

OS:CD Motor Layouts Three layouts proved especially popular with old Egroup members. [edit]

Circuitry

OS:CD Motor Circuitry Various strategies can be used to pulse the motor each with different advantages. [edit]

ReplicationsOS:CD Motor old egroup replications

31

List a link to your replication from this PESWiki project. [edit]

Discussion Discussion List (http://groups.yahoo.com/group/pes_CD_Motor/) - created for this project at

PESWiki Talk page for this project at PESWiki

[edit]

ContactsTim Harwood posted these instructions and designed the original experiment and ran the original egroup. Emailed questions will be replied to by additions to the FAQ. email:

See also PESWiki:Contact [edit]

See also Directory:Electromagnetic Directory:Robert Adams

- Other Open Source Projects- PESWiki main index- PES Network Inc. (http://pureenergysystems.com) Retrieved from "http://peswiki.com/index.php/OS:CD_Motor"Categories: CD Motor

32

OS:Ross MotorFrom PESWiki

Theoretical overunity motor design presented by Jim Ross, based on theories put forth by Tom Bearden. Energy Shuttling and dq/dt blocking are the primary methods used.

Table of contents

1 About

1.1 Official Website

1.1.1 Introduction and Description

1.2 Comments

1.2.1 Not Likely to be Feasible1.2.2 Fascinating

1.3 Contact

2 See also[edit]

About This is a new page. You are welcome and invited to help us expand its contents. Once the page has become more mature and adequately populated, this notice can be removed.[edit]

33

Official Website http://www.mns-pc.com/

An Exercise in Overunity Thinking (http://www.mns-pc.com/Page2.htm) - Objective: To design a practical working overunity system primarily based on the theories put forth by Tom Bearden. The main methods of achieving overunity are dm/dt (mass displacement current) blocking and energy shuttling. Means used to perform these methods result in other effects that enhance the systems performance.

Component Detail (http://www.mns-pc.com/component_detail.htm) - materials required Additional Thoughts (http://www.mns-pc.com/additional_thoughts.htm) - This design is

scalable and many configurations are possible. Originally a two motor shaft design was conceived. This may be a good place to start.

Figures (http://www.mns-pc.com/figures.htm) [edit]

Introduction and Description

Quoting from http://www.mns-pc.com/index.htm First and foremost I must say that this system is only theoretical and the closest that it has come to being built is the virtual model shown above. This design is a compilation of other people's ideas placed in, what is hopefully, an original package. The purpose of this site is to present this design to the public so that it inspires thought and constructive criticism. If feedback proves the concepts wrong, then I will scrap it and start over.

This is an examination of the two shaft version of my virtual free energy device. It uses many principles, but relies heavily on dm dt mass charge blocking and energy shuttling to achieve over unity.

The system has two shafts, with two motors on each shaft. A third shaft has rotary air gap switches that are used for timing. All of the shafts are coupled together by way of belts and pulleys. Two of the belts, in conjunction with their respective pulleys, are charge separators and act as the systems source dipole. A large voltage is developed by the charge separator with a small but constant current. The third belt insures that the motor shafts are timed properly with the rotary gap switches.

... This configuration has been described as an electrostatic motor and has been demonstrated to work while requiring very little current.

... There are two types of current.. mass and massless. Mass current flow destroys the source dipole and massless does not. Therefore it is permissible to have massless current flow through the source circuit and it is undesirable to have mass current flow. It is not meaningless to have massless current flow as it is converted to mass current upon reaching the load. Mass charge blocking and massless current bridging is necessary for this system to achieve over unity. In this system, the capacitor plates and lower rotors block the mass current from destroying the source dipole. When charged, the capacitor plates would like nothing more than to have their charges come together and be neutralized. Therefore they seek a path to one another in order to destroy the charge separation. Of course this is contrary to what we are trying to accomplish. We wish to keep our source dipole so that we may continue using it. However we will take advantage of this situation and satisfy the capacitors desire to neutralize their charges by momentarily shorting the plates together by placing the coil between their plates. The coil then develops a magnetic field not because of mass current

34

flow but because of the large E field across it. There will be some loss of energy due to mass current flow but the source dipole will be mostly intact. The key is to develop as large of a magnetic field in the shortest amount of time so that the energy can be bridged or shuttled from the capacitor plates to the upper motor with minimal loss to the source dipole. Because of conservation of energy, the shuttling process converts the capacitor E field into a magnetic field, which performs work on the lower rotor, and then the conserved magnetic field is converted back to an E field to perform work on the upper motor.

Comments [edit]

Not Likely to be Feasible

I have examined the disclosure on the Ross Motor. In terms of the interplay between the magnetics and the electromotive forces generated: The conversion of power to/from the rotational motion by the electromagnetic interplay would tend to be reasonably efficient, but there is no evidence that one would derive more electrical energy coming out than going in. Further, as in any piece of rotating machinery, there are unavoidable frictional losses, wherein the mechanical energy is converted to heat. This contributes as well to a loss of efficiency of the motor. Thus, I would not expect that one would derive any benefit from this type design.

Rotating and switching designs are common, but there is no evidence of an actual reduction of magnetic field strength in the permanent magnets which would provide additional usable output energy and hence produce an over-unity device. (Robert Indech, PhD PE, New Energy Congress member; April 7, 2006)

[edit]

Fascinating

Fascinating! It is complex enough that I don't understand it yet and likely will take awhile to get through it. (Ken Rauen; April 7, 2006)

[edit]

Contact Jim Ross email: jimross {at} bex.net

See also Directory:Electromagnetic

- Other Open Source Projects- PESWiki main index- PES Network Inc. (http://pureenergysystems.com) Retrieved from "http://peswiki.com/index.php/OS:Ross_Motor"

35

OS:Bill Williams' Joe CellFrom PESWiki

Replication Project

In the first part of April, 2006, Bill Williams told a discussion list that he successfully tested a device known as the Joe Cell. It allegedly feeds off Orgone energy and uses electrically charged water as the "gate" or medium through which the aetheral energy is drawn from the surroundings and transferred to the automobile engine. He was in process of disclosing how he accomplished this when confronted on April 11 by two unidentified individuals who told him to cease all of his alternative energy work or there would be dire consequences. Williams complied, but others involved are doing all they can to make sure the information is republished and replicated widely. See story at PESN.com (http://pesn.com/2006/04/13/9600257_Bill_Williams_threatened/) (Apr. 13, 2006). The following index page is to link to the various pertinent resources. If you have information relevant to this project, please feel free to help build this index page so that it is as streamlined as possible: simple, clear, complete. This is a publicly editable site. .

Table of contents

1 Project

1.1 Materials1.2 Blueprints1.3 Instructions1.4 Replications

1.4.1 Functional

1.4.1.1 Bill Williams1.4.1.2 Peter Stephens

36

1.4.1.3 James Wildman1.4.1.4 Joe

1.4.2 Building

1.5 Images1.6 Videos1.7 FAQ

1.7.1 Q. What size of tubes do you use?1.7.2 Q. What kind of water do you use?1.7.3 Q. How long do you charge the water?1.7.4 Q. Must there be bubbles in the water?1.7.5 Q. How will you know if the cell is charged?

1.8 Supression Response1.9 Theory1.10 Discussion Lists1.11 Assistance

2 See also[edit]

Project [edit]

Materials Replication Instructions (http://www.silent-running.com/cell/INDEX.HTM) - Group of pages is for

the purpose of documenting my experiences in building the experimental orgone accumulator known as the "Joe Cell".

Joe Cell Material Requirements (http://www.silent-running.com/cell/fuel.htm) Charging Joe Cell Material Requirements (http://www.silent-running.com/cell/cones.htm) JoeCell Methods and Materials (http://www.silent-running.com/cell/mandm.HTM) Joe Cell Conversions Information (http://www.silent-running.com/cell/convert.HTM)

Experimenter's Guide to the Joe Cell (http://www.nutech2000.com/prod36.htm) - booklet for sale; also available in German translation. (NuTech2000)

PCV not recommended; try using aluminum tubing [1] (http://groups.yahoo.com/group/JoesCell2/message/7)

[edit]

Blueprints

Blueprints for Joe Cell; Revision 5 (http://www.pureenergysystems.com/news/2006/04/13/9600257_Bill_Williams_threatened/Joe_Cell_rev5_Apr14_2006.pdf) (pdf) - Current as of April 14, 2006.

Joe Cell blueprints; rev. 5 (http://groups.yahoo.com/group/JoesCell2/message/54) - alt copy (Apr

37

14, 2006) - - - -

38

39

[edit]

Instructions In process of posting; not yet complete. Silver Solder is okay. Would be better than running leads in the cell as they produce a feild and only allow the top of the cell to produce Joe energy bubbles. Alternatively, put a hole in the centre bottom of the container cell. Machine or weld a plate and bolt on to the centre cathode. Seal with sikaflex 291 Marine grade and seating washers (knife cutting board teflon type material). Connect the negative onto the bolt and tighten to earth on the vehicle. Put the lid on and start. [2] (http://groups.yahoo.com/group/JoesCell2/message/15)

Download (http://www.megaupload.com/?d=9IMJQK7M) (link not functioning?) - Description: Joe Cell design by Bill Williams, runs a car without any fossil fuel; Filename: BILL.pdf; Filesize: 62.44 KB

[edit]

40

Replications post here [edit]

Functional

[edit]

Bill Williams Had operational truck running on Joe Cell with tremendous power. Was visited by two men who told him to stop all alt energy activities. He complied, destroying his lab notes, etc. See story at PESN.com (http://pesn.com/2006/04/13/9600257_Bill_Williams_threatened/) (Apr. 13, 2006).

Ford Test Drive (http://groups.yahoo.com/group/JoesCell2/message/16) - Bill describes how his Ford performed with the Joe Cell. "It the throttle response was very crisp or touchy. With about a 1/8" of movement the next thing I new I was booking at close to 80 mph. If I lifted of ever so slightly on the throttle and it felt like I was putting the brakes on and the speed would drop down to 30 mph or so." (Apr 6, 2006)

"Yes" (http://groups.yahoo.com/group/JoesCell2/message/33) - Bill's answer to question: "have you been threatened by men touting guns". (Apr 11, 2006)

[edit]

Peter Stephens John Carter said he took a ride the other day in a Ford Econovan that Peter Stephens converted to run on a Joe Cell. He said the car "rocketed up the hill" it had so much power. (Ref (http://pesn.com/2006/04/13/9600257_Bill_Williams_threatened/).) [edit]

James Wildman my joe cell (http://groups.yahoo.com/group/JoesCell2/message/38) - "the truck has twice its

normal power, ...but will not yet run on the cell alone" (Apr 12, 2006) Re: my joe cell (http://groups.yahoo.com/group/JoesCell2/message/40) - "Posted pics of my test

cell in jim's cells folder" (Apr 12, 2006) I suggest that we could use the phenomenom of the cell's overexpansion of water as a method of measuring acclamation of the engine.. IE, if you advance too far the cell will overexpand the water and empty itself.. A few degrees back toward normal and its fine.. As the engine acclimates this threshold should migrate toward advance until you can run on cell energy alone... [edit]

Joe Interesting day with Joe (http://groups.yahoo.com/group/JoesCell2/message/45) - Peter describes

some unusual phenomena that Joe showed them. "You could even put your finger close to the point of entry yet not be booted." (Apr 13, 2006)

RE: Interesting day with Joe (http://groups.yahoo.com/group/JoesCell2/message/47) - Damien Holyoak describes more from the visit. (Apr 13, 2006)

[edit]

41

Building

Nick (http://groups.yahoo.com/group/JoesCell2/message/6) - mostly built (Apr 5, 2006) [3] (http://groups.yahoo.com/group/JoesCell2/message/12) [4] (http://groups.yahoo.com/group/JoesCell2/message/14)

Bernie Heere (http://groups.yahoo.com/group/JoesCell2/message/13) (Apr 6, 2006) Brendon (http://groups.yahoo.com/group/JoesCell2/message/9) - intends to build (Apr 5, 2006) JB Bob (http://groups.yahoo.com/group/JoesCell2/message/17) - Awaiting tubes. (Apr 6, 2006) Brad (http://groups.yahoo.com/group/JoesCell2/message/21) - considering buying tubes from

NuTech (Apr 6, 2006) [5] (http://groups.yahoo.com/group/JoesCell2/message/22) Rob (http://groups.yahoo.com/group/JoesCell2/message/27) - getting the parts (Apr 7, 2006)

[6] (http://groups.yahoo.com/group/JoesCell2/message/35) Pat (http://groups.yahoo.com/group/JoesCell2/message/55) - intention (Apr 14, 2006)

[edit]

Images post here

Photo Album at JoesCells2 Yahoo!Group (http://ph.groups.yahoo.com/group/JoesCell2/photos/browse/6ee6) - need to join (http://groups.yahoo.com/group/JoesCell2/) the list to access this feature. Joining is automatic, not approval required.

[edit]

Videos post here [edit]

FAQ [edit]

Q. What size of tubes do you use?

I have found using the 7"Tube lengths of 2"Cathode 2.5, 3, 3.5 works well and 10 to 12"length x 4" Vessell Container works. I find all Joe Cells are working but not enough energy seems to come away in the smaller cells. -- Peter [7] (http://groups.yahoo.com/group/JoesCell2/message/42) [edit]

Q. What kind of water do you use?

Just use any water that you find handy. I precharge mine but have used spring water dam ater [??] bore water and find that ground water works just fine. -- Peter [8] (http://groups.yahoo.com/group/JoesCell2/message/36) [edit]

42

Q. How long do you charge the water?

You have to only charge for three to ten minutes then take the positive lead off and allow vacuumn to do her thing. -- Peter [9] (http://groups.yahoo.com/group/JoesCell2/message/36) [edit]

Q. Must there be bubbles in the water?

Joe says we don't need the Bubbles. -- Peter [10] (http://groups.yahoo.com/group/JoesCell2/message/36) [edit]

Q. How will you know if the cell is charged?

Possibly you'll know the cell is charged when hairs on the back of your kneck tell you. Try as you put the back of your hand near the Cell and see if the hair lifts. Bill could you check that on your Cell and others just to confirm but a voltage readout shows anywhere from at rest pulsing 132-300milli Volts dc-13.5 V DC with Power on but generally you'll be earthed out to the motor and chassis as your working around the Cell and wont notice it as your grounded not quiet the same as a TV screen discharge just energy from the cathode. A meter will discharge the cell. -- Peter [11] (http://groups.yahoo.com/group/JoesCell2/message/36) [edit]

Supression Response Comments in reply to the threats (http://pesn.com/2006/04/13/9600257_Bill_Williams_threatened/) issued to Bill Williams.

Momentum on side of positive change (http://groups.yahoo.com/group/JoesCell2/message/41) - Hamish Robertson encourages the Joe Cell revolution. "The status quo will change very quickly when [Mr.] Average realises that the guy down the road is paying nothing for gas while he's getting sucker punched for $400 bucks every moth." (Apr 12, 2006)

Re: Spooks and Horse$h1t (http://groups.yahoo.com/group/JoesCell2/message/49) - Daniel Moeck joins discussion list out of rebellion to the supression of Bill Williams. (Apr 13, 2006)

I don't get it (http://groups.yahoo.com/group/JoesCell2/message/57) - why would they do that? (Apr 14, 2006)

Re: We all hang together... (http://groups.yahoo.com/group/JoesCell2/message/67) - Bill Lang says "The Hydrogen Economy begins at Home" and encourages the revolution for energy independence from the big boy bullies. (Apr 14, 2006)

i heard what happen to bill william this is terrible (http://groups.yahoo.com/group/JoesCell2/message/69) - "i hope i am not on the mib hit list as well. i just published the 3rd book (http://www.e-booktime.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=SG-PB&Affiliate=pesnetwork&Category_Code=MP) which contain ideal reality of the joe cell in machnical form ." (Apr 14, 2006)

Probably just mob (http://groups.yahoo.com/group/JoesCell2/message/72) - Kel says "It seems if it was a government group they would flash some badges and claim "national security" reasons, but they wouldn't threaten personal harm, only thugs do that." (Apr 14, 2006)

More back-up (http://groups.yahoo.com/group/JoesCell2/message/75) - "just renewing my web site for the new cad drawings posted from bill and photos so soon have more locations" (Apr 14, 2006)

43

[edit]

Theory Works on Implosion (http://groups.yahoo.com/group/JoesCell2/message/52) - conjecture by Kyle

Talajic (Apr 14, 2006) [edit]

Discussion Lists E-gas, was the original list where Bill Williams was posting his information, which was

discontinued by Yahoo. Joe Cell Free Energy Device

Yahoogroups (http://groups.yahoo.com/groups/joecellfreeenergydevice) Joe's Cell 2 Yahoogroups (http://groups.yahoo.com/group/JoesCell2/) - was started by Bill after

E-gas was shut down. View Messages (http://groups.yahoo.com/group/JoesCell2/messages/1) - commenced

April 4, 2006. Last message (21) before Bill turned list posting

off (http://groups.yahoo.com/group/JoesCell2/message/29) "You might have NASA knocking on your door" (Apr 8, 2006)

Peter restores list (http://groups.yahoo.com/group/JoesCell2/message/30) - "I have been able to restore the site to fully operational lets get this moving" (Apr 11, 2006)

This PESWiki project page is announced (http://groups.yahoo.com/group/JoesCell2/message/51) (Apr 14, 2006)

Assistance Peter, who is runnig a Ford Econovan using the Joe Cell, is glad to answer questions about how to build one, and has agreed to help post a very clear set of plans for any who wish to do so. He may be reached at ingnventor {at} yahoo.com.au His skype username is ingventor

Helping Hand (http://groups.yahoo.com/group/JoesCell2/message/5) Peter says, "would anybody need any help getting their Cell working I'm happy to look and make recomendations to improve it"

See also Directory:Joe Cell

- Other Directory listings- PESWiki home page Retrieved from "http://peswiki.com/index.php/OS:Bill_Williams'_Joe_Cell"Categories: Joe Cells

44

Advanced Resonant FieldsPosted on Saturday, March 25, 2006 @ 23:47:37 PST by vlad

HiI have added a link to your website. Thank you for your assistance. In addition to the announcement below, I have attached a very interesting article containing some of the easy proof of the Resonant Field Theory.ThanksDr. Hait

[see "Corrected Quantum Mechanics and Relativity" doc in our Downloads section - Vlad]

If you understood how everything in universe worked, what fields could you revolutionize?Announcing:The first Russian/American International Seminar on Advanced Resonant Fields.Title:

Introduction to Resonant Field Theory with special application to Photonic Computing.April 25-27, 2006. On beautiful and tropical Saipan in the Northern Mariana Islands, USA. Three hours South of Tokyo.The Resonant Field Theory is the first truly unified and easy-to-understand theory of everything.

This detailed set of seminars will cover the most recent and advanced science, combining Relativity with corrected Quantum Mechanics. It will explain the fundamental mechanism of physics, and will answer many long-pending questions including quantum gravity, antigravity, and quantized photonic computing.

Because of its fundamental nature, it is expected that it will have a direct effect on your particular field, because it provides substantially better methods for more accurate subatomic measurements, and understanding of molecular assemblage.

Because of its fundamental nature, Resonant Fields will have a great and global impact on science. Every school, every business, and every high-paying position has competition. It exists, and you will have to deal with it. It's the real world. So consider:

Could you wind up obsolete, even before your graduate? It's worth thinking about. It's worth checking it out.... just in case. You've got a lot on the line. Logically, you will want to be first in line. More information is provided, including a preview of some Resonant Field Theory evidence. www.rmrc.org/rfi/broch.htm.Complete details of the seminar itself, including pre-registration are available at http://www.resonant/. Thanks for reading

Dr. John N. Hait

jhait@resonantfieldsinc.com RFI Chief Scientist and Professor of Resonant Fields, http://www.r/.=======================

Resonant Fields Seminar, April 25-27, 2006Exciting Science Beyond Einstein. Einstein died trying to complete his Unified Field Theory, a comprehensive, intuitive explanation of the way everything in the universe operates... a Theory of Everything. Feynman longed for a basic mechanism that would enable us to know not just "How the Earth moves around the Sun, but what makes

45

it go." Discovery of that basic mechanism, Resonant Fields, has finally united all of physics into a comprehensive, intuitive explanation of the way everything works... just like Einstein and Feynman dreamed of. Thus, the Resonant Field Theory is expected to have a significant and immediate impact on science, technology, education, commerce, and even society.This breakthrough-discovery has already laboratory-proven that the resonant fields, of