Upload
doshi78
View
70
Download
13
Embed Size (px)
DESCRIPTION
spec
Citation preview
Aluminium EN AW 5754AW 5754 offers excellent corrosion resistance against seawater and industrial polluted atmospheres. As a result of itsimproved strength properties, it is widely used in flooring applications. When cold worked, it should preferably be used instabilised tempers (H3x).
Applications:• Ship and boat frames
• Food processing accessories
• Snowmobile and vehicle bodies
• Illuminated traffic signs
The information on our web site is accurate to the best of our knowledge and understanding. Although every effort has been made to ensureaccuracy, the company cannot accept any responsibility for any direct or indirect damages resulting from possible errors or incorrect
application of the information of this publication. We reserve the right to make changes.
Copyright © 2014 Rautaruukki Corporation. All rights reserved.
Document printed on 10.04.2014 www.ruukki.com
Dimensions
• EN AW 5754 (AlMg3)
• Material according to EN 5733
• Tolerances according to EN 4853, 4854
• Packing: sheets á 1000 kg/bundle
• Material certificate EN 10204 / 3.1
Dimensions mm Theor. weight TemperThickness Width Length Coils kg/m
Sheets kg/pcO/H 111 H22/H32 DNV
0.7 1250 2.4 • •
1 1000 2.7 • •
1 1000 2000 5.4 • •
1 1250 3.4 • •
1 1250 2500 8.4 • •
1 1500 4.1 • •
1 1500 3000 12.2 • •
1.25 1000 4.1 • •
1.25 1000 2000 6.8 • •
1.25 1250 4.2 • •
1.25 1250 2500 10.5 • •
1.5 1000 4.1 • •
1.5 1000 2000 8.1 • •
1.5 1250 5.1 • •
1.5 1250 2500 12.7 • •
1.5 1500 6.1 • •
1.5 1500 3000 18.2 • •
2 1000 5.4 • •
2 1000 2000 10.8 • •
2 1250 6.8 • •
2 1250 2500 16.9 • •
2 1500 8.1 • •
2 1500 3000 24.3 • •
2.5 1000 6.8 • •
2.5 1000 2000 13.5 • •
2.5 1250 8.4 • •
2.5 1250 2500 21.1 • •
2.5 1500 10.1 • •
2.5 1500 3000 30.4 • •
3 1000 8.1 • •
Aluminium EN AW 5754
2
Dimensions mm Theor. weight TemperThickness Width Length Coils kg/m
Sheets kg/pcO/H 111 H22/H32 DNV
3 1000 2000 16.2 • •
3 1250 10.1 • •
3 1250 2500 25.3 • •
3 1500 12.2 • •
3 1500 3000 36.5 • •
3 2000 6000 97.2 • •
4 1000 10.8 • •
4 1000 2000 21.6 • •
4 1250 13.5 • •
4 1250 2500 33.8 • •
4 1250 3000 40.5 • •
4 1500 16.2 • •
4 1500 3000 48.6 • •
4 2000 6000 129.6 • •
5 1000 2000 27 • •
5 1250 2500 42.2 • •
5 1500 3000 60.8 • •
5 2000 6000 162 • •
6 1000 2000 32.4 • •
6 1250 2500 50.6 • •
6 1500 3000 72.9 • •
6 2000 6000 194.4 • •
8 1250 2500 67.5 •
8 1500 3000 97.2 •
10 1020 2020 55.6 •
10 1270 2520 86.4 •
10 1520 3020 123.9 •
10 2000 6000 324 •
12 1020 2020 66.8 •
15 1520 3020 185.9 •
20 1520 3020 247.9 •
25 1020 2020 139.1 •
25 1270 2520 216 •
Aluminium EN AW 5754
3
Properties
Chemical Properties
Element Si Fe Cu Mn Mg Cr Ni Zn Ti Ga V Remarks Others/E
Others/T
Al
EN5733
Weight%
0.40 0.40 0.10 0.50 2.63.6 0.30 0.15 0.15 0.100.6 Mn+Cr
0.05 0.15 Remainder
Mechanical properties
Property/Temper O/H111 H112 H12 H14 H16 H18 H22/H32 H24/H34 H26/H36 H28/H38
EN 4852 Rp0.2 80 100 170 190 220 250 130 160 190 230
t=2mm Rm 190240 190 220270 240280 265305 290 220270 240280 265305 290
A50 mm 16 12 6 4 3 2 10 7 5 4
HBW 52 62 66 72 80 88 63 70 78 87
Bending R 180° 1.0 t 2.0 t 2.5 t
Bending R 90° 1.0 t 1.5 t 2.0 t 3.0 t
Physical properties
Density: 2.68 g/cm3 Thermal Expansion: 23.7 µm/(mK)
Melting Point: 645°C Resistivity: 53 nΩm
Modulus of Elasticity: 70500 MPA Thermal Conductivity: 132 W/(mK)
Modulus of Rigidity: 26500 MPA Electrical Conductivity: 32.5 %IACS
Poisson's ratio: 0.33
Specific heat capacity: 897 J/(kgK)
The content of this document has been created from web page last updated 12 Nov 2012Our sales and technical support are happy to give you more information. Visit www.ruukki.com/contactus.
Aluminium EN AW 5754
4