Upload
others
View
20
Download
0
Embed Size (px)
Citation preview
Aluminum Casings
AcAccecentnt LLigighthtiningg (5(5-L-L9696)) Decorative LLLLLLigigigigigghththtinini gggg (5(5(5(5 LL-L-L-L1818R3RR ) HaHaHaHaHaHaHangngngngngngngn ininiinining g Lighting ((5-L7L75R)
5-L50 5-L75R5-L01 5-L04 5-L245-L07 5-L235-L215-L09
Aluminum Extrusion for Strip Lights
www.poliled.com
305.384.7550
EXTR
USIO
N
EXTRUSION APPLICATION
Aluminum Extrusions are guides that encase your LED strip and tape lights. The
channel increases the application of your regular strip lighting while adding long-term
durability and a clean, unobtrusive finish.
Application
1. Allow a beam of light to be hidden within walls, ceilings, cabinets, stairs, closets,
and floors
2. Allow light source at an otherwise unreachable angle or area
3. Completely replace all traditional sources of lighting and eliminate the need for
larger obtrusive light sources
www.poliled.com
305.384.7550
1574 NW 108th Ave
Miami, FL 33172
Poli LED & Signs Miami’s #1 Volume LED Lighting Wholesaler LS-1 Certified Lighting Experts 305.384.7550 1
5-L01/Cap
5-L01/Clip
Recessed Aluminum Extrusions
Application• 12.2mm inside width ideal for strip lights 8-12mm wide• 8.5mm shallow height easily fits within thin cabinets, furniture, and drywall• Recessed installation into cabinets, tables, walls, and more• Heat Dissipation Limit: <15W/m
L01 ExtrusionShallow Recessed Mount with Lip
Accessories
sku description sku description
5-L01-CV 2.5m PMMA Opal Matte Diffuser 5-L01-Cap 2 pc set - one end has hole
5-L01-CVC 2.5m PMMA Clear Diffuser 5-L01-Clip Clip mounts to surfaces
sku length lip width cut out width inside width height
5-L01 2.5m (8.2 ft) 23.1mm (0.9”) 17.1mm(0.67”) 12.2mm(0.48”) 8.5mm(0.33”)
5-L15.8x6A/Cap
5-L15.8x6A/Clip
Application• 11.2mm inside width ideal for strip lights 8-10mm wide• 6mm shallow height easily fits within thin cabinets, furniture, and drywall• Heat Dissipation Limit: <15W/m
L15.8x6A ExtrusionShallow Recessed Mount with Lip
Accessories
sku description sku description
5-L15.8x6A/CV 2.5m PMMA Opal Matte Diffuser 5-L15.8x6A/Clip wall mount clip
5-L15.8x6A/CVC 2.5m PMMA Clear Diffuser 5-L15.8x6A/Cap 2 pc set - one end has hole
sku length lip width cut out width inside width height
5-L15.8x6A 2.5m (8.2 ft) 22.5mm (0.88”) 15.8mm (0.62”) 11.2mm(0.44”) 6mm (0.236”)
Application• 12.4mm inside width ideal for strip lights 8-12mm wide• 7mm shallow height easily fits within thin cabinets, furniture, and drywall• Heat Dissipation Limit: <15W/m
L17.4x7A ExtrusionStandard Reccesed Mount With Lip
Accessories
sku description sku description
5-L17.4x7A/CV 2.5m PMMA Opal Matte Diffuser 5-L17.4x7A/Clip wall mount clip
5-L17.4x7A/CVC 2.5m PMMA Clear Diffuser 5-L17.4x7A/Cap 2 pc set - one end has hole
sku length lip width cut out width inside width height
5-L17.4x7A 2.5m (8.2 ft) 24.7mm (0.97”) 17.4mm (0.685”) 12.4mm(0.49”) 7mm (0.275”)
2 View Full Catalog at www.poliled.com Sales & Support 305.384.7550
Recessed Aluminum Extrusions
Application• 20mm inside width ideal for double row strip lights 12-18mm wide• 10.9mm shallow height easily fits within thin cabinets, furniture, and drywall• Wide and shallow track offers higher beam angle• Heat Dissipation Limit: <15W/m
L13 ExtrusionWide & Shallow Recessed Mount With Lip
Accessories
sku description sku description
5-L13-CV 2.5m Opal Matte Diffuser 5-L13-Cap 2/pc set - one end has hole
sku length lip width cut out width inside width height
5-L13 2.5m (8.2 ft) 25mm (0.98”) 23.5mm(0.93”) 20mm(0.79”) 10.9mm(0.4”)
5-L13/Cap
5-L15.8x6A/Cap
5-L15.8x6A/Clip
Application• 12.2mm inside width ideal for strip lights 8-12mm wide• 15.3mm height offers more space to diffuse the strip and maximum application space• Compatible with L01 covers• Heat Dissipation Limit: <15W/m
L17x15A ExtrusionStandard Reccesed Mount With Lip
Accessories
sku description sku description
5-L17x15A/CV 2.5m PMMA Opal Matte Diffuser 5-L17x15A/Clip wall mount clip
5-L17x15A/CVC 2.5m PMMA Clear Diffuser 5-L17x15A/Cap 2 pc set - one end has hole
sku length lip width cut out width inside width height
5-L17x15A 2.5m (8.2 ft) 24.5mm (0.96”) 17mm (0.67”) 12.4mm(0.49”) 15mm (0.59”)
5-L03/Cap
5-L01/Clip
Application• 12.2mm inside width ideal for strip lights 8-12mm wide• 15.3mm height offers more space to diffuse the strip and maximum application space• Compatible with L01 covers• Heat Dissipation Limit: <15W/m
L03 ExtrusionStandard Reccesed Mount With Lip
Accessories
sku description sku description
5-L01-CV 2.5m PMMA Opal Matte Diffuser 5-L03-Cap 2/pc set - one end has hole
5-L01-CVC 2.5m PMMA Clear Diffuser 5-L01-Clip wall mount clip
sku length lip width cut out width inside width height
5-L03 2.5m (8.2 ft) 23.2 mm 17.1mm(0.67”) 12.2mm(0.48”) 15.3mm(0.6”)
Poli LED & Signs Miami’s #1 Volume LED Lighting Wholesaler LS-1 Certified Lighting Experts 305.384.7550 3
5-L17/Cap
Recessed Aluminum Extrusions
Application• 32.2mm inside width ideal for multiple strips and rope light setups• 34.9mm height offers even diffusion and a tighter beam angle• Ideal for general purpose ceiling lighting with double row or high powered strips• Heat Dissipation Limit: <25W/m
L17 ExtrusionWide Ceiling Reccesed Mount With Lip
Accessories
sku description sku description
5-L17/CV 2.5m PMMA Opal Matte Diffuser 5-L17/Cap 2 pc set - one end has hole
sku length lip width cut out width inside width height
5-L17 2.5m (8.2 ft) 56.2mm( 2.21”) 35.2mm (1.38”) 32.2mm (1.27”) 34.9mm (1.37”)
Frankfurt Airport in Hesse, Germany utilizes the 5-L17 extrusion in order to illuminate areas that receive no light after sunset. The extrusions allowed them to place an unobstrusive form of light allowing full use of
their walkways while still maintaining efficient targeted lighting. A similar effect with an overhanging fixture installed on their high ceilings would have used five times more electricity.
Application• 12.2mm inside width ideal for strip lights 8-12mm wide• Indirect lighting bounces off the aluminum surface• Gives a soft glow aiding in stair steps, walkways, and night vision• Heat Dissipation Limit: <20W/m
L23 ExtrusionWide & Shallow Recessed Mount With Lip
Accessories
sku description sku description
5-L23-CV 2.5m Opal Matte Diffuser 5-L23-Cap 2/pc set - one end has hole
sku length cut out depth cut out width inside width height
5-L23 2.5m (8.2 ft) 26.2mm (1.03”) 60mm (2.362”) 12.2mm(0.48”) 76.2mm(3”)
5-L23/Cap
4 View Full Catalog at www.poliled.com Sales & Support 305.384.7550
Recessed Aluminum Extrusions
Application• 13mm (0.41”) diameter offers a sleek modern wall glowInstallation1. Open the cutout hole at 13mm (0.41”)2. Use gypsum/adhesive to secure the sides of the extrusion to
the cut-out hole, lightly coat the adhesive behind the wings of the extrusion laying flat against the wall as well
3. After drying. Paint the wings to reveal an embedded extrusion• Heat Dissipation Limit: <15W/m
L68 ExtrusionRecessed Mount for Drywall
sku length lip width cut out width inside width height
5-L68 2m (6.56 ft) 53 mm (2.08”) 13mm (0.51”) 10.5mm (0.41”) 14mm (0.55”)
Accessories
sku description sku description
5-L68/CV 2.5m PMMA Opal Matte Diffuser 5-L68/Cap end caps - one end has hole
Application• 4mm inside width fits SMD2216, SMD2016, or SMD3014 Ultra-Thin Strip Lights• 10mm height easily fits within thin cabinets, furniture, and drywall• Heat Dissipation Limit: <10W/m
L96 ExtrusionUltra Thin Recessed Mount
Accessories
sku description sku description
5-L96/CV 2.5m PMMA Opal Matte Diffuser 5-L96/Cap 2/pc set - one end has hole
Application• 4mm inside width fits SMD2216, SMD2016, or SMD3014 Ul-tra-Thin Strip Lights• 10mm height easily fits within thin cabinets, furniture, and drywall• Lip adds a aluminum finish to the end result• Heat Dissipation Limit: <10W/m
L97 ExtrusionUltra Thin Recessed Mount With Lip
Accessories
sku description sku description
5-L97/CV 2.5m Opal Matte Diffuser 5-L97/Cap 2/pc set - one end has hole
sku length cut out width inside width height
5-L96 2.5m (8.2 ft) 6mm (0.23”) 4mm (0.15”) 10mm (0.4”)
sku length lip width cut out width inside width height
5-L97 2.5m (8.2 ft) 11mm (0.43”) 6mm (0.236”) 4mm (0.157”) 10mm (0.39”)
Poli LED & Signs Miami’s #1 Volume LED Lighting Wholesaler LS-1 Certified Lighting Experts 305.384.7550 5
Recessed Aluminum Extrusions
Accent Lighting
Placing emphasis on furniture enhances your home appeal
Utility Lighting
Extrusions can produce indirect lighting at night without blinding you
Showcase Lighting
Show off your collection with style
General Purpose Lighting
Completely replace bulky traditional
fixtures with non-obtrusive lighting
The Talk Of The Party
Create memorable impressions with unique lighting design
6 View Full Catalog at www.poliled.com Sales & Support 305.384.7550
Surface Mounted Aluminum Extrusions
Application• 12.2mm inside width ideal for strip lights 8-12mm wide• Rotating clips allow up to 60° adjustability• Shallow and slim body can be used in thin cabinets and tables with ease• Compatible with L01 accessories• Heat Dissipation Limit: <15W/m
L02 ExtrusionShallow Surface Mounted
sku length width inside width height
5-L02 2.5m (8.2 ft) 17.1mm(0.67”) 12.2mm(0.48”) 8.5 mm(0.335”)
Accessories
sku description sku description
5-L01-CV 2.5 PMMA Opal Matte Diffuser 5-L02/Cap 2 pcs/set - 1 end has hole to allow feeding of live wire
5-L01-CVC 2.5m PMMA Clear Diffuser 5-L01/Clip extrusion attaches onto clip
5-L02/RC surface mount with swivel 60° rotating clip
5-L02/Corner attach two extrusions in a 90° con-figuration with seamlessly
5-L02/Cap 5-L02/Corner5-L02/RC 5-L01/Clip
Application• 11.2mm inside width ideal for strip lights 8-10mm wide• 6mm shallow height easily fits within thin cabinets, furniture, and drywall• Heat Dissipation Limit: <15W/m
L15.8x6 ExtrusionShallow Surface Mounted
Accessories
sku description sku description
5-L15.8x6/CV 2.5m PMMA Opal Matte 5-L15.8x6/Clip wall mount clip
5-L15.8x6/CVC 2.5m PMMA Clear Cover 5-L15.8x6/Cap 2 pc set - one end has hole
sku length cut out width inside width height
5-L15.8x6 2.5m (8.2 ft) 15.8mm (0.62”) 11.2mm(0.44”) 6mm (0.236”)
Application• 12.4mm inside width ideal for strip lights 8-2mm wide• 7mm shallow height easily fits within thin cabinets, furniture, and drywall• Heat Dissipation Limit: <15W/m
L17.4x7 ExtrusionShallow Surface Mounted
Accessories
sku description sku description
5-L17.4x7/CV 2.5m PMMA Opal Matte Cover 5-L17.4x7/Clip wall mount clip
5-L17.4x7/CVC 2.5m PMMA Clear Cover 5-L17.4x7/Cap 2 pc set - one end has hole
sku length cut out width inside width height
5-L17.4x7 2.5m (8.2 ft) 17.4mm (0.685”) 12.4mm(0.49”) 7mm (0.275”)
Poli LED & Signs Miami’s #1 Volume LED Lighting Wholesaler LS-1 Certified Lighting Experts 305.384.7550 7
Application• 12.2mm inside width ideal for strip lights 8-12mm wide• 15.3mm height offers more space to diffuse the strip and maximum application space• Heat Dissipation Limit: <15W/m
L04 ExtrusionStandard Surface Mounted
Accessories
sku description sku description
5-L01-CV 2.5m PMMA Opal Matte Diffuser 5-L04/Cap 2 pcs/set - 1 end has hole
5-L01-CVC 2.5m PMMA Clear Diffuser 5-L04/Clip surface mounting clip
5-L04/Corner attach two extrusions in a 90° config-uration seamlessly
5-L04/RC surface mount with swivel60° rotating clip
Application•16.9mm inside width ideal for 8-15mm strips• Rounded cover produces a 180° beam angle, wider than your usual extrusion• Wiring track underneath allows you to attach multiple pieces in sequence and keep organized• Heat Dissipation Limit: <15W/m
L10 ExtrusionRounded Cover With Wiring TrackSurface Mounted
Accessories
sku description sku description
5-L10-CV 2.5m Opal Matte Diffuser 5-L13-Cap 2/pc set - one end has hole
sku length width inside width height
5-L04 2.5m (8.2 ft) 17.1mm (0.67”) 12.2mm( 0.48”) 15.3mm (0.6”)
sku length width inside width height
5-L10 2m (6.56 ft) 19.7mm (0.78”) 16.9mm( 0.67”) 20.2mm (0.8”)
5-L04/Cap
5-L04/RC 5-L04/Clip 5-L04/Corner
5-L10/Cap
Application• 12.4mm inside width ideal for strip lights 8-12mm wide• 15mm height• Heat Dissipation Limit: <15W/m
L17x15 ExtrusionStandard Surface Mounted
Accessories
sku description sku description
5-L17x15/CV 2.5m PMMA Opal Matte 5-L17x15/Clip wall mount clip
5-L17x15/CVC 2.5m PMMA Clear Cover 5-L17x15/Cap 2 pc set - one end has hole
sku length cut out width inside width height
5-L17x15 2.5m (8.2 ft) 17mm (0.67”) 12.4mm(0.49”) 15mm (0.59”)
8 View Full Catalog at www.poliled.com Sales & Support 305.384.7550
Surface Mounted Aluminum Extrusions
Application• 32.2mm inside width ideal for multiple strip light setups and use as general pur-pose lighting • 34.9mm height creates a 60° beam angle for strip lights mounted inside the channel• Can be used as hanging fixture• Heat Dissipation Limit: <25W/m
L18 ExtrusionWide & Deep Surface Mounted
Accessories
sku description sku description
5-L18-CV 2.5m PMMA Opal Matte Diffuser 5-L18/Cap 2/pc set - one end has hole
Application• 12.2mm inside width ideal for strips 8-12mm wide• Ideal for lobbies, entrances, malls, hotels• Creates a seamless edge against the floor• Load bearing structure can support up to 4 tons (8,000 lbs)• Heat Dissipation Limit: <15W/m
L21 ExtrusionWide Shallow Recessed Mount With Lip
Accessories
sku description sku description
5-L01-CV 2.5m Opal Matte Diffuser 5-L21/Cap 2 pcs/set - 1 end has hole to allow feeding of live wire
5-L01-CVC 2.5m PMMA Clear Diffuser
sku length width inside width height
5-L18 2m (6.56 ft) 35.2mm (1.4”) 32.2mm (1.27”) 34.9mm (1.37”)
sku length width inside width height
5-L21 2m (6.56 ft) 56.7mm (2.23”) 12.2mm (0.48”) 9.8mm(0.39”)
5-L18/Cap
5-L21/Cap
Application• 35mm (1.38”) diameter is a versa-tile size • 24mm inside width has space for 2 high-power strips• Heat Dissipation Limit: <15W/m
L14 ExtrusionWide & Shallow Surface Mounted
sku length width inside width height
5-L14 2.5m (8.2 ft) 23.5mm (0.93”) 20mm (0.79”) 10.9mm (0.43”)
Accessories
sku description sku description
5-L14/CV 2.5m PMMA Opal Matte Diffuser 5-L14-Cap 2 pcs/set - 1 end has hole
5-L14-RC surface mount with swivel 60° rotating clip
5-L14/Cap5-L14/RC
Poli LED & Signs Miami’s #1 Volume LED Lighting Wholesaler LS-1 Certified Lighting Experts 305.384.7550 9
5-L35/Cap
5-L35/Clip
Surface Mounted Aluminum Extrusions
Application• 8.5mm inside width ideal for strip lights 5-8mm wide• To insert a strip, slide the 5-8mm strip into the channel• Plastic construction is ideal for humid areas• Comes fitted with non-removable cover in place• Heat Dissipation Limit: <10W/m
L25 ExtrusionSlim Plastic Surface Mounted
sku length width inside width height
5-L25 2.5m (8.2 ft) 11.7mm (0.46”) 8.5mm (0.33”) 12mm (0.47”)
Accessories
sku description
5-L25/Cap 2 pcs/set - 1 end has hole to allow feeding of live wire
Application• 8.4mm inside width ideal for strip lights 5-8mm wide• To insert a strip, slide the 5-8mm strip into the bottom channel• Ultra Slim extrusion ideal for tight spaces• Heat Dissipation Limit: <10W/m
L35 ExtrusionTall Aluminum Surface Mounted
Accessories
sku description sku description
5-L35/CV 2.5m PMMA Opal Matte Diffuser 5-L35/Cap 2 pcs/set - one end has hole
5-L35/Clip Clip attaches onto surface - Extrusion clips onto the clip and holds it firm
5-L25/Cap
sku length width inside width height
5-L35 2m (6.56 ft) 10mm (0.393”) 8.4mm (0.33”) 13mm (0.52”)
Application• 12mm inside width ideal for strip lights 8-12mm wide• 13mm height• Heat Dissipation Limit: <10W/m
L12x13 ExtrusionTall Aluminum Surface Mounted
Accessories
sku description sku description
5-L12x13/CV 2.5m PMMA Opal Matte Diffuser 5-L12x13/Clip wall mount clip
5-L12x13/CVC 2.5m PMMA Clear Diffuser 5-L12x13/Cap 2 pc set - one end has hole
sku length cut out width inside width height
5-L12x13 2.5m (8.2 ft) 12mm (0.473”) 9.5mm(0.375”) 13mm (0.52”)
10 View Full Catalog at www.poliled.com Sales & Support 305.384.7550
Surface Mounted Aluminum Extrusions
Application• Allows two light strips to illuminate up and down• 12mm width fits low, medium, and high brightness strips • Minimalist ambient lightingcompliments any space• Heat Dissipation Limit: <30W/m
L50 ExtrusionTwo Way Directional Surface Mounted
Application• 12.2mm inside width ideal for strip lights 8-12mm wide• Provides an elegant form of ambient lighting• Heat Dissipation Limit: <15W/m
L62 ExtrusionDirectional Surface Mounted
sku length width inside width height
5-L62 2.5m (8.2 ft) 17.7mm (0.7”) 12.2mm (0.48”) 43.5mm (1.71”)
Accessories
sku description sku description
5-L62/CV PMMA Opal Matte Diffuser 5-L62/Cap 2 pc/set - one side has hole
sku length width inside width visible height
5-L50 3m (9.85 ft) 17.7 (0.7”) 12mm (0.48”) 48.5mm (1.9”)
Accessories
sku description sku description
5-L50/CV PMMA Opal Matte Diffuser 5-L50/Cap end cap with hole
5-L50/Clip wall mount clip - 1) attach clip to wall 2) aluminum profile snaps onto clip 5-L50/Clip
5-L50/Cap
5-L62/Clip 5-L62/Cap
5-L44/Cap
5-L44/Clip
Application• 20.4mm inside width ideal for strip lights 5-8mm wide• Removable PMMA Acrylic Cover• Ultra Slim extrusion ideal for tight spaces• Heat Dissipation Limit: <25W/m
L44 ExtrusionWide Heat Dissipating Surface Mounted
Accessories
sku description sku description
5-L44-CV 2.5m PMMA Opal Matte 5-L44/Clip Clip attaches onto surface
sku length width inside width height
5-L44 2.5m (8.2 ft) 23.5mm (0.91”) 20.4mm(0.79”) 15mm(0.58”)
Poli LED & Signs Miami’s #1 Volume LED Lighting Wholesaler LS-1 Certified Lighting Experts 305.384.7550 11
Application• 12.8mm inside width ideal for strip lights 8-12mm wide• Bendable: ideal for wrapping around fixtures or used as decorative hanging lighting with different heights• 5.6mm height fits seamlessly underneath furniture• Ideal for hanging style ambient light• Heat Dissipation Limit: <10W/m
L114 ExtrusionUltra Slim Bendable
sku length width inside width height
5-L114 2.5m (8.2 ft) 18mm (0.7”) 12.8mm (0.5”) 5.6mm (0.22”)
sku description sku description
5-L114/CV PMMA Opal Matte Diffuser 5-L18R3-Clip clip used for wall mount
Application• Bendable: ideal for wrapping around fixtures or used as decorative hanging lighting with different heights• 10mm inside width ideal for strip lights 8-12mm wide• 6mm height• Heat Dissipation Limit: <10W/m
L15x16 ExtrusionUltra Slim Bendable
Accessories
sku description sku description
5-L15x16/CV 2.5m PMMA Opal Matte 5-L15x16/Clip wall mount clip
5-L15x16/CVC 2.5m PMMA Clear Cover 5-L15x16/Cap 2 pc set - one end has hole
sku length width inside width height
5-L15x16 2.5m (8.2 ft) 15mm (0.59”) 10mm(0.4”) 6mm (0.24”)
Bendable Extrusions
Creating beautiful light has never been easier, simply wrap the bendable alumi-num extrusion around the object or bend to conform into the correct shape.
Application:• Rounded installation areas• Curved walls or panels• Tiered hanging installation• Curving hanging installation
12 View Full Catalog at www.poliled.com Sales & Support 305.384.7550
Hanging / High Light Output Aluminum Extrusions
Application• 35mm (1.38”) diameter• 24mm inside width has space for 2 high-power strips• Completely remove traditional lighting fixtures in exchange for a modern-contemporary hanging fixture• Heat Dissipation Limit: <25W/m
L18R3 Extrusion1.38” High Light Output Extrusion
sku length width inside width height
5-L18R3 2.5m (8.2 ft) 35mm (1.378”) 24mm (0.945”) 35mm (1.378”)
Accessories
sku description sku description
5-L18R3/CV PMMA Opal Matte Diffuser 5-L18R3/Clip clip used for wall mount
5-L18R3/Cap 2 pcs/set 5-L18R3/J 4-way junction connector
5-L/Wire steel wire hanging kit 5-L18R3/L 2-way corner connector
Application• 39mm inside width fits up to 3 high-power strips• Completely remove traditional lighting fixtures in exchange for a modern-contemporary hanging fixture• Heat Dissipation Limit: <35W/m
L46R Extrusion2” High Light Output Extrusion
sku length width inside width height
5-L46R 2.5m (8.2 ft) 50mm (1.97”) 39mm (1.535”) 35mm (1.378”)
Accessories
sku description sku description
5-L46R/CV PMMA Opal Matte Diffuser 5-L46R/Cap 2 pc end caps with hole
5-L46R/Clip clip used for wall mount 5-L46R/J 4-way junction connector
5-L/Wire steel wire hanging kit 5-L46R/L 2-way corner connector
Application• 60mm (2.36”) hanging fixture• 47.4mm inside width fits up to 4 high-power strips• Dedicated cavity for power supplies, controllers, and wiring• Heat Dissipation Limit: <30W/m
L60R Extrusion2.36” High Light Output w/ Accessory Cavity
sku length width inside width height
5-L60R 2.5m (8.2 ft) 60mm (2.33”) 47.4mm (1.84”) 60mm (2.33”)
Dedicated Cavity for power supplies, controllers, and wiring 57mm (2.25”) 26.9mm (1.04”)
Accessories
sku description sku description
5-L60R-CV PMMA Opal Matte Diffuser 5-L60R/Cap aluminum endcap w/o hole
5-L/Wire steel wire hanging kit - 1x wall anchor 1x screw 1x steel wire 1x extrusion mount
Products Used: 5-L75, 5-L/Wire, M-28N-240W5-L60R/Cap5-L/Wire
5-L46R/J
5-L46R/CN
5-L/Wire
5-L46R/Cap
5-L46R/Clip
5-L18R/J
5-L18R/L
5-L/Wire
Poli LED & Signs Miami’s #1 Volume LED Lighting Wholesaler LS-1 Certified Lighting Experts 305.384.7550 13
Hanging / High Light Output Aluminum Extrusions
Application• 75mm (3”) hanging fixture• 62.4mm inside width fits up to 5 high-power strips• Dedicated cavity for power supplies, controllers, and wiring• Heat Dissipation Limit: <45W/m
L75R Extrusion3” High Light Output w/ Accessory Cavity
sku length width inside width height
5-L75R 2.5m (8.2 ft) 75mm (2.95”) 62.4mm (2.45”) 75mm (2.95”)
Dedicated Cavity for power supplies, controllers, and wiring 71.4mm (2.81”) 37.4mm (1.47”)
Accessories
sku description sku description
5-L75R-CV PMMA Opal Matte Diffuser 5-L75R/Cap aluminum endcap w/o hole
5-L/Wire steel wire hanging kit - 1x wall anchor 1x screw 1x steel wire 1x extrusion mount
Products Used: 5-L75, 5-L/Wire, M-28N-240W
Modular and Modern
5-L75R - 3” x 3” hanging fixtures create clean and timeless office lighting.
Add Utility To Any Home
There are thousands of ways to install high light output extrusions
Customize To Any Length
Cutting at angles allow you to create seamless beams of light
across multiple wall surfaces.
5-L75R/Cap5-L/Wire
HANGING HIGH LIGHT OUTPUT SHOWCASE
14 View Full Catalog at www.poliled.com Sales & Support 305.384.7550
45° Edge Aluminum Extrusions
Application• 12.2mm inside width allows for one high power strip• Rounded diffuser gives a 180° beam angle• Ideal for retail and jewelry stores• Heat Dissipation Limit: <15W/m
L06 ExtrusionRound 45° Edge Mount
sku length width inside width height
5-L06 2.5m (8.2 ft) 16mm (0.63”) 10mm (0.39”) 16mm (0.63”)
Accessories
sku description sku description
5-L06/CV PMMA Opal Matte Diffuser 5-L06/Cap clip used for wall mount
5-L06/CVC PMMA Clear Diffuser 5-L06/Clip 4-way junction connector
Application• 12.2mm inside width allows for one high power strip• Flat diffuser gives a 120° beam angle• Used for retail store cabinets and jewelry stores• Heat Dissipation Limit: <15W/m
L07 ExtrusionFlat 45° Edge Mount
Accessories
sku description sku description
5-L07/CV 2.5m PMMA Opal Matte 5-L07/Cap 2/pc set - one end has hole
5-L07/Clip wall mount clip - 1) attach clip to wall 2) aluminum profile snaps onto clip
sku length width inside width height
5-L07 2.5m (8.2 ft) 18.4mm (0.72”) 14.1mm (0.55”) 18.4mm (0.72”)
5-L07/Cap
5-L06/Cap
5-L06/Clip
5-L07/Clip
Application• 12.2mm inside width allows for one high power strip• Rounded diffuser gives a 180° beam angle• Ideal for retail and jewelry stores• Heat Dissipation Limit: <15W/m
LC16 ExtrusionRound 45° Edge Mount
sku length width inside width height
5-LC16 2.5m (8.2 ft) 16mm (0.63”) 10mm (0.39”) 16mm (0.63”)
Accessories
sku description sku description
5-LC16/CV PMMA Opal Matte Diffuser 5-LC16//Cap clip used for wall mount
5-LC16//CVC PMMA Clear Diffuser 5-LC16//Clip 4-way junction connector
Poli LED & Signs Miami’s #1 Volume LED Lighting Wholesaler LS-1 Certified Lighting Experts 305.384.7550 15
Application• 20mm inside width ideal for double row strip lights 12-18mm wide• Ideal for edge high lighting solutions and jewelry cabinets• Rounded diffuser gives a 180° beam angle• Heat Dissipation Limit: <20W/m
L16 ExtrusionWide 45° Round Edge Mount
Accessories
sku description sku description
5-L16/CV 2.5m Opal Matte Cover 5-L16/Cap 2/pc set - one end has hole
5-L16/Con straight connector allows you to place two pieces together with no seam
sku length width inside width height
5-L16 2.5m (8.2 ft) 30mm (1.18”) 20.2mm (0.8”) 30mm (1.18”)
5-L16/Cap5-L16/Con
16 View Full Catalog at www.poliled.com Sales & Support 305.384.7550
Driveway, Pavement, and Floor Aluminum Extrusions
Application• 10mm inside width ideal for strip lights 5-8mm wide• Flat diffuser will not crack under the weight of vehicles or pedestrians• Pavements, sidewalk surfaces, bike lanes, parking lots• Must be properly sealed with clear silicone if placed in a wet location. Silicone sealant must not conduct electricity.• Heat Dissipation Limit: <20W/m
L09 ExtrusionLoad Bearing Floor Reccesed Mount
sku length width inside width height
5-L09 2m (79”) 18mm (0.7”) 10mm (0.39”) 8.2mm (0.32”)
Accessories
sku description sku description
5-L09-CV 2m PMMA Opal Matte 5-L09-Cap 2 pcs/set - one end hole
Application• 12.2mm inside width ideal for strip lights 8-12mm wide• Lip add a clean aluminum edge to the presen-tation• Flat diffuser will not crack under the weight of vehicles or pedestrians as weight is distributed over the flooring beside it simultaneously • Heat Dissipation Limit: <20W/m
L33 ExtrusionLoad Bearing Floor Recessed Mount with Lip
Accessories
sku description sku description
5-L33/CV 2.5m PMMA Opal Matte 5-L33/Cap 2/pc set - one end has hole
sku length lip width cut out width inside width height
5-L33 2m (79”) 27.1mm (1”) 21.4mm (0.84”) 12.2mm (0.48”) 11mm (0.433”)
5-L09/Cap
Waterproof Installation Guide for floor extrusions
power supply
12 V or 24V120 AC
hole
fixture cable options1. Apply clear silicone across the bottom of the
floor cut-out2. Place strip and wire to the power supply3. Place extrusion into the siliconed cut-out 4. Apply non-conductive silicone across the
entire length above the strip5. Finish seal by applying the diffuser
NOTE: SLICONE MUST BE CLEAR AND ELECTRICALLY
NON-CONDUCTIVE. WE SUGGEST DOW CORNING 3145 CLEAR
SILICONE ADHESIVE FOR BEST RESULTS.
5-L33/Cap
Poli LED & Signs Miami’s #1 Volume LED Lighting Wholesaler LS-1 Certified Lighting Experts 305.384.7550 17
Edge Lit Glass and Acrylic Aluminum Extrusions
Application• Fits into cove lighting applications for an easy to install outward glow• 20.4mm inside width allows you to place up to 2 high power strips
L41 ExtrusionWide Shallow Recessed Mount With Lip
Accessories
sku description sku description
5-L41/CV 2.5m Opal Matte Cover 5-L41/Cap 2/pc set - one end has hole
sku length lip width cut out width inside width height
5-L41 2m (79”) 37.7mm(1.4”) 25mm(0.985”) 20.4mm(0.8”) 45mm(1.75”)
Product Specfications• 10mm inside width ideal for strip lights 5-8mm wide• Designed to fit 8-10mm acrylic, glass, and boards• Used to illuminate the edges of glass and acrylic
L36 ExtrusionDesigned for Edge Lit Glass and Acrylic
sku length width inside width height
5-L36 2m (79”) 12mm (0.47”) 10mm (0.39”) 12mm (0.47”)
Cove Lighting Aluminum Extrusions
5-L41/Cap
18 View Full Catalog at www.poliled.com Sales & Support 305.384.7550
Stair Edge Aluminum Extrusions
Application• The upward glow accents the stairs• IP67 level can be achieved with use of endcaps and clear, non-electrically conductive silicone applied over the strip before placing the diffuser in place
L22 ExtrusionUpward Glow Stair Step Mount
sku length width inside width height
5-L22 2.5m (8.2 ft) 48mm (1.9”) 12.3mm (0.48”) 26.7 (1.05”)
Accessories
sku description sku description
5-L22/CV PMMA Opal Matte Diffuser 5-L22/Cap 2 pcs/set - one end has hole
Application• The downward glow acts as ambient step lighting that doesn’t visibly show a bright glow• Ideal for dark areas or outdoor areas• Waterproof enclosure - seal with clear, non-electrically conductive silicone to ensure maximum waterproofing
L24 ExtrusionDownward Glow Stair Step Mount
Accessories
sku description sku description
5-L24/CV PMMA Opal Matte Diffuser 5-L24/Cap 2 pcs/set - one end has hole
sku length width inside width height
5-L24 2.5m (8.2 ft) 80mm (3.15”) 12.3mm (0.48”) 50mm (1.04”)
5-L22/Cap
5-L24/Cap
SAME-DAY SHIPPING AND PICK UP
We know your business can get quite busy at times, because of this we’ve implemented a good amount of time into
making sure you receive your products as soon as possible. For your convenience everything is accessible online at poli-
led.com
Same-Day Local Delivery
Must be within 2 hours of our locations. Cut Off Time 12:00 PM. Deliveries arrive same day before 5:30 PM. Orders over
$500 receive free Same-Day Local Delivery.
Less than 45 minutes travel time = $35 charge
Greater than 45 minutes travel times = $70 charge
Immediate Pick Up
Orders placed online immediately appears in our warehouse picking queue making even the largest of orders ready for
pick up within 10 minutes.
Delivery Orders
Deliveries made before 3:00 PM are shipped the same day. UPS Ground takes 1~5 days depending on location.
Florida, 1~2 days. Everywhere else, 3~5 days.
OPEN A WHOLESALER ACCOUNT WITH US TODAY.
CALL 305.384.7550
Partnering with a company that can support you in offering unbelievable pricing, after-sales support, real-time inventory
counts, product variety, product quality and quality control procedures can streamline your business, allowing you to
focus on what you’re good at. Our service will continuously allow you to surpass sales goal after sales goal.
Massive Product Variety and Inventory
Our newly expanded warehouse location allows us to stock products at massive quantities giving you ease of mind. We
stock over 10,000+ skus of led indoor to outdoor lighting and accessories. Our inventory is your inventory with real-time
quantity counts so you can make a sale on practically everything led lighting.
Unbeliavable Pricing and Price Beat Guarantee
Our dealers always receive the best pricing available because we like to keep healthy relationships and happy business
owners on our team. Dealers Only: We will beat any price given by our local competitors.
Quality Without Compromise
Our product lines consists of NEC approved, UL and ETL Listed, 5 year warranty, DLC Certified, RoHS, and more safety
and efficiency certifications ensuring that your customers see you as a value-adding professional.
Custom Product Packaging and Sales Tools
We allow our dealers to organize their own box designs with our template to give your brand a marketing edge over your
competition. We also offer our tools such as our LED ROI calculator, IES files, specification sheets, high resolution product
pictures, and more so you can sell knowing we have your back.
Apply online at www.poliled.com/led-wholesaler | Apply through phone 305.384.7550
D L
SAME-DAY LOCAL DELIVERY LOCAL PICK UP SAME-DAY SHIPPING
POLI LED & SIGNS MOVING FORWARD 2018
This year, Poli LED & Signs has taken great strides to ensure the ultimate customer, dealer, and employee experience. We
have hired more than the previous year and appropriately reward our top talent to further promote greatness within our
team. We have remodeled our showroom to fit all new incoming models, expanded our product lines, launched a new
website capable of full service ordering, shipping and delivering, showing customer price levels, added to our vehicle fleet
to ensure speedy same-day deliveries, and more. 2018 has been a very productive year for us and we hope our changes
can directly benefit your business.
Full Service Online Webstore Launched
Built from scratch, our customers are now able to directly see our full led lighting catalog online. This includes pricing,
specification sheets, IES files, product applications, and delivery and shipping options. Paid online orders go directly to
our warehouse picking queue allowing pick up orders to be ready within 10 minutes.
Investing In New Product Lines
On a monthly basis, we are releasing new product lines with full UL/ETL and DLC certifications along with 3-5 year
warranties. Come visit our showroom month to month and you’ll see different product variety. LED technology has new
innovations almost every day of the week and we like to keep updated to offer the newest all at wholesale pricing.
NEW PRODUCT LINES RELEASING SUMMER 2018
LED Streetlights: 1-ST-G Series, 1-ST-C Series, 1-ST-Y Series, 1-ST-K Series LED Floodlights: F-K Series, F-E Series
LED Canopy: 1-CP-S Series LED Highbay: 9-HB-U Series LED Ceiling Lights: A-T Series, A-F Series, A-E Series,
9-P2’x4’-UD Series LED Panel Lights, 9-P1’x4’-UL Series 9-T2’x4’-UL Series LED Troffer Lights Aluminum Extrusions:
Hanging High Light Output Extrusions (4) 5-L18R3, 5-L46R, 5-L60R, 5-L75R Recessed Mount Extrusions (2) 5-L96,
5-L97 Surface Mount Extrusions (4) 5-L44, 5-L50, 5-L62, 5-L114 Stair Edge Extrusions (1) 5-L24 LED Emergency
Lights: 1-SL-DMPS Series LED Wall & Garden Lights: 1-G-A/B Series, 1-W-A/B Series Power Supplies: UL Series
Power Supplies, Outdoor Dimmable Power Supply 110VAC->12VDC
New Delivery Services Launched
All shipping orders received before 3:00 PM ship the same day. Florida 1-2 day delivery. Everywhere else 3-5 day delivery.
ServicesSame-Day Local Delivery: Orders needed in a hurry can be shipped direct from our warehouse and arrive before 5:30
PM. We can deliver direct to your business or job-site.
Immediate Pick Up: Online orders are received and picked by our warehouse team immediately after payment. This
allows you to pick up your order right after the checkout.
Listening To Our Employees
We’ve added new HLVS fans and floor fans, floor scrubbers, state-of-the-art warehouse inventory software, improved
management and organization, multiplied our trash bins by 500%, and implemented a new return structure in conjunction
with our new management software resulting in zero delays when it comes to order picking times and fulfillment.
We’ve installed new coffee machines on the showroom floor, tracked and rewarded good sales performance, increased
communication between customer to sales to purchasing so our new product lines reflect exactly what our customers
need, expanded the previous showroom to now fit our new incoming models, and more.
So far, there has been many changes and we will be moving forward with the same mindset of continuing to improve our
brand and the organization within in order to be able to create a larger impact for our dealers.
Thank you for 17 years in business.
www.poliled.com | 305.384.7550 | [email protected] | 1574 NW 108th Ave. Miami, FL 33172
WE
DO
IT
DIF
FE
RE
NT
6063-T5 Aircraft Aluminumis a very lightweight but extremely tough material. As a reference, we ran our 2018
Mercedez Benz Sprinter Long Wheelbase 170” weighing 8 tons (8,000 lbs) over
our load-bearing aluminum extrusions with zero effect to the aluminum structure.
_______________________________________________________________________
PMMA Opal Matte Acrylic Coversare 3x more expensive than regular polycarbonate covers to manufacture but it is
what we use to complement our 6063-T5 aircraft aluminum channels.
Benefits of PMMA Acrylic over Polycarbonate
• PMMA captures incoming light and distributes the wavelengths throughout the
entire cover allowing all light to exit through the other side evenly dispersed
• Thicker and more rigid construction offers a precision fit over its’ polycarbonate
counterpart making it ideal for complete waterproofing and constant vibrations
• Extreme UV, weather, and heat protection allows it to stay pristine opal matte
white for its lifetime unlike polycarbonate which yellows after 24-36 months
_______________________________________________________________________
Anodized Aluminum ChannelsAnodization is a treatment done to increase resistance to corrosion and wear over
time as well as providing better adhesion for glues and tapes.
Benefits of anodization
• Scratch resistant - ideal for traffic areas that produce plenty of foot or hand con-
tact or in public areas where there may be tampering
• Rust proof - installing our channels in outdoor weather for its lifetime will not see
any dramatic differences versus if you had installed it indoors
• Increased adhesion - glues, tapes, plaster, and paint will have no issues sticking
to our aluminum meaning it will have a maintenence free lifetime
www.poliled.com | 305.384.7550 | [email protected] | 1574 NW 108th Ave. Miami, FL 33172
www.poliled.com | 305.468.8986 | [email protected] | 1574 NW 108th Ave. Miami, FL 33172
Place Your OrderOnline www.poliled.comPhone 305.384.7550
Apply for wholesaler
pricing on our website
Instantly see your
pricing and buy online
Same day local delivery
or immediate pickup
Miami’s #1 LED Lighting & Signs Wholesaler
Page Index
Recessed
Surface Mounted
Hanging and High Light Output
Driveway, Pavement, Floor
45° Edge
Edge Lit Glass/Acrylic and Cove Lighting
Stair Edge
1-4
5-8
9-10
11
12
13
14
Pg.9 - 5-L60R 2.36” High Light Output Extrusion
APPLY FOR WHOLESALER PRICING AND SERVICES
CALL 305.384.7550 OR WWW.POLILED.COM