Aluminum Sliding Glass Corner Meet Door · 2014. 9. 9. · 6-22 June 2011Aluminum Sliding Glass Corner Meet Door Series SGD780 Specifications: • Door members are extruded from a

June 2011226-

Aluminum Sliding Glass Corner Meet DoorSeries SGD780

Specifications:

• Door members are extruded from a minimum of 6063-T6 aluminum alloy(except where noted)

• Finish is white or bronze• Glazing is exterior• Mortise locks standard on all doors• Maximum panel size 5' x 8' or 4' x 10'• Available in standard and custom sizes• Primary door always has the locking jamb at the corner• All doors are viewed from outside looking in• Track quantity will be the same on both doors based on the unit with the

most panels• Frame members may vary in depth according to configuration• Maximum of 4 tracks overall per side• Screens not available• Panels at corner always meet on the outer most track (see drawing) on

both inside and outside corner• Stainless steel assembly screws and stainless steel tandem rollers• 2 3/4" exterior sill standard• 7/16" laminated glas• Sill is clear anodize

WinGuard brand windows refer only to those products that are glazed with PGT laminated glass. Monolithic glazing does not provide hurricane protection.

EXTERIOR

OUTSIDE CORNERPRIMARY LEFT

Note: PGT reserves the right to change material design and/or construction withoutnotice or liability

Options:

• 1 1/16" Laminated insulating glass• Double applied ogee colonial muntins• Laminated colonial insulating glass (muntins between monolithic tempered cap and laminated glass)

• Simulated divided lite (double applied ogee muntins with muntins between the monolithic tempered cap and laminated glass)

• Multi-panel by-pass and pocket styles• Popular glass tints• Tandem nylon roller assembly (no up charge), limited by panel weight• 1 5/8" sill• 2 3/4" sill • 4 1/2" sill• 5 1/4" sill• Optional 9" bottom rail (no up charge)• Satin nickel or polished brass PVD hardware• Argon gas (laminated insulating glass only)• Low-E• Premium frame colors are Arizona Beige, Pebble Khaki, Venetian Bronze, Clear Anodize and ETERNA® Finish

• ETERNA® Finish: Acacia, Cherry, Dark Oak, Dark Walnut

Notes:

• Doors are tested in accordance with PA/TAS 201, 202, and 203 specifications

• Tested impact resistance to ASTM E1886 and E1996• Tested forced entry resistance to AAMA 1303.5-1976 and

ASTM F842-04• Tested air infiltration to ASTM E283• Tested water resistance to E547/E331• Florida Product Approval available• Test reports available upon requests• Miami Dade County N.O.A.

EXTERIOR

OUTSIDE CORNERPRIMARY RIGHT

EXTERIOR

INSIDE CORNERPRIMARY LEFT

EXTERIOR

INSIDE CORNERPRIMARY RIGHT

June 2011 236-


OUTSIDE CORNER

Calculations for determining overall door size andpocket track dimensions:

By-Pass Door

Straight by-pass door dimension (from catalog)+ 2.476 = finished corner door dimension

Pocket Door

Straight pocket door finished opening (from catalog)+ 2.476 = finished corner door dimension

Straight pocket door track length (from catalog)+ 2.476 = corner pocket door track length

Shown as Primary Left 4 panel XXXX Pocket with aRight 4 panel XXXO By-Pass viewed from outside looking in

Shown with a Primary Right 4 panel XXXX By-Pass with aLeft 4 panel XXXX By-Pass viewed from outside looking in

INSIDE CORNER

Calculations for determining overall door size andpocket track dimensions:

By-Pass Door

Straight by-pass door dimension (from catalog)+ 2.476 + (((# of tracks-1) * 2.529) + 0.708)= finished corner door dimension

Pocket Door

Straight pocket door finished opening (from catalog)+ 2.476 + (((# of tracks-1) * 2.529) + 0.708)= finished corner door dimension

Straight pocket door track length (from catalog)+ 2.476 + (((# of tracks-1) * 2.529) + 0.708)= corner pocket door track length

Note: All dimensions are taken from the outer most point of the track (see drawings above).

OUTSIDE CORNER

LEFTDOOR

RIGHT DOOR

EXTERIOR

RIGHTDOOR

LEFT DOOR

EXTERIOR

INTERIOR

INSIDE CORNER

TRA

CK

LE

NG

TH =

(STR

AIG

HT

BY-

PAS

S D

OO

R +

2.4

76)

+(((

# O

F TR

AC

KS

- 1)

* 2

.529

+ .7

08)

TRACK LENGTH = (STRAIGHT BY-PASS DOOR + 2.476+ ((( # OF TRACKS - 1) * 2.529) + .708)

FIN

ISH

ED

OP

EN

ING

= (S

TRA

IGH

T P

OC

KE

T D

OO

R +

2.4

76)

TRA

CK

LE

NG

TH=

(STR

AIG

HT

PO

CK

ET

DO

OR

TR

AC

K +

2.4

76)

1. Specify Inside or Outside corner (viewed from outside looking in)

2. Specify Primary Left or Primary Right

3. Select any combination of the left and right door configurations below• By-Pass to By-Pass • Pocket to Pocket• By-Pass to Pocket • Pocket to By-Pass

4. Left door size or custom size

5. Right door code size or custom size

6. Pricing: Determine the price of the primary door and all the options then price the secondarydoor and all options. Add the two straight door prices together and add $600 to the combined list price for the corner assembly.

June 201124

PLACING AN ORDER

6-


�

�

n/a

�

n/a

�

n/a

n/a

�

�

�

�

�

�

X

XX

OX

XXX

OXX

XXXX

OXXX

n/a

�

�

�

�

�

�

�

�

n/a

�

n/a

�

n/a

RIGHT DOOR

Configurations Pocket By-Pass Configurations Pocket By-Pass

LEFT DOOR

X

XX

XO

XXX

XXO

XXXX

XXXO

June 2011 256-


CORNER - PANEL TYPESPANEL LETTER

CS

QS

ASSA

CF

ASTRAGAL RECEIVER

CORNERLOCKSTILE

SC

SQ

FC

ASTRAGALRECEIVER

SINGLEINTERLOCK

SINGLEINTERLOCK

SINGLEINTERLOCK

SINGLEINTERLOCK

CORNER LOCKSTILE

ASTRAGALRECEIVER

SINGLEINTERLOCK

SINGLEINTERLOCK

ASTRAGALRECEIVER

ASTRAGAL RECEIVER

ASTRAGAL RECEIVER

FIXEDLOCKSTILE

FIXEDLOCKSTILE

CIIC

CORNERLOCKSTILE

SINGLEINTERLOCK

SINGLEINTERLOCK

CORNER LOCKSTILE

KADM

LOCKSTILE

SINGLEINTERLOCK

SINGLEINTERLOCK LOCKSTILE

SINGLEINTERLOCK LOCKSTILE

SINGLEINTERLOCK

LOCKSTILE

BF

SINGLE INTERLOCK

SINGLE INTERLOCK

SINGLEINTERLOCK

SINGLEINTERLOCK

PFIXED

LOCKSTILER

SINGLEINTERLOCK

FIXEDLOCKSTILE

SINGLE INTERLOCK

Left Hand Pockets(pictured below)

A

A

B

AB

B

AB

B

B

Finishedopening

Panel type for Right Hand - M, F, F

Panel type for Right Hand - M, F

Panel type for Right Hand - M

Panel type for Right Hand - M, F, F, F

June 2011266-

Aluminum Sliding Glass Corner Meet DoorSeries SGD780 Pocket Panel Configurations and Size Chart

4P4T

1 POCKET

3P3T

1 POCKET

2P2T

1 POCKET

3 347/16 357/8 745/16

4 467/16 517/8 985/16

1P2T

1 POCKET

TrackLength

FinishedOpening

PocketDepth

SizeWidth

TYPE

All doors viewed from the outside.* Sizes do not include corner formula add-on.

10 1111/2 337/8 1451/4

12 1351/2 397/8 1751/4

16 1831/2 517/8 2351/4

7'6" 8313/16 337/8 11711/16

9 10113/16 397/8 14111/16

12 13713/16 517/8 18911/16

5 561/8 337/8 90

6 681/8 397/8 108

8 921/8 517/8 144

Series SGD780

June 2011 276-


NOTES AND ADDITIONAL PRICING

Panels and Frame1. Pricing corner doors - select two doors, total the base price and options for each and add $600 to get the total combined list price2. Minimum panel size is 28" x 32 5/8"3. Maximum panel size for laminated is 5' x 8' or 4' x 10'4. Maximum size for laminated insulating is 5' x 8' or 4' x 10'5. PVD finish hardware handle set (gold, satin nickel) - add $300 per locking stile

• 2P2T add: $300 for XO or OX configurations or $600 for XX configurations• 2P2T 1P add: $300• 3P3T add: $300 for XXO or OXX configurations or $600 for XXX configurations• 3P3T 1P add: $300• 4P4T add: $300 for XXXO or OXXX configurations or $600 for XXXX configurations• 4P4T 1P add: $300

6. Keylock• Standard handle sets add $25 per keyed lockset• PVD handle sets add $35 per keyed lockset

7. 1 5/8" sill add-on no up charge (does not provide a water design pressure)8. 3 1/2" sill add-on no up charge9. 4 1/2" add-on sill available at $14 list per foot10. 5 1/4" add-on sill available at $16 list per foot11. Custom sizes and counter top units use next largest size plus 25%12. 4" bottom rail standard, 9" bottom rail optional with no up charge13. Premium frame colors are Arizona Beige, Pebble Khaki, Venetian Bronze, Clear Anodize, and Eterna® Finish

Glass14. Laminated insulating glass make-up:

3/16" tempered monolithic - air – 3/16" heat strength - .090 interlayer – 3/16" heat strength15. Options specific to insulating glass:

• Low-E options:• LWE (hard coat) - add Low-E up charge to LIG option price• LEH (soft coat) - add Low-E up charge to base price• L7 (soft coat) - add Low-E up charge plus 10% to base price• Argon gas – add $7 list per glass lite (XX unit = 2 lites)• Double tints are not available on LIG

16. White interlayer is not available with SGP interlayer17. SGP interlayer is standard above a nominal 4' x 8' panel

Colonial Muntins18. Custom colonial configurations – add 20% colonial up charge19. Double ogee colonial: raised ogee muntin outside and raised ogee muntin inside20. Simulated divided lite: colonial insulated internal grids between glass with double ogee colonial

• add double ogee colonial price and colonial insulated21. Premium frame color with CIG, use colonial insulating glass column22. Brittany style colonial priced same as standard colonial

Miscellaneous23. Nylon tandem rollers optional at no extra charge (not available on lami IG over a 4' x 8' panel)24. Standard hardware (white or black) included in base price

ETERNA® Finish

25. Finishes available: Acacia, Cherry, Dark Oak, Dark Walnut26. Muntin options are double applied ogee: ogee inside and outside and colonial insulating

• grids between glass on colonial insulating will be bronze finish27. Color restoration system is available. Two paint shade pens per stain color

June 2011286-

6'8" Pocket

Available in White & Bronze

6'8" By-Pass

Always check with your local building officials for compliance requirements.

Sizes do not include corner formula add-on, see page 6-23.

List Price SERIES SGD780


June 2011 296-



8'0" By-Pass

8'0" Pocket




June 2011306-


9'0" By-Pass

9'0" Pocket





June 2011 316-


10'0" Pocket



List Price SERIES SGD78010'0" By-Pass


Documents

Aluminum Sliding Glass Corner Meet Door · 2014. 9. 9. · 6-22 June 2011Aluminum Sliding Glass Corner Meet Door Series SGD780 Specifications: • Door members are extruded from a