American Axle & Manufacturing (AA&M) - · PDF fileAmerican Axle & Manufacturing (AA&M) TIME : Nov 11, 2009 - Nov 12, 2009 10:00 AM LOCATION: 1840 Holbrook Ave ... 38.01 WHEEL BALANCER,

GM & Other SuppliersNov 19, 2009 10:00 AMOnline auction, Various locations throughout North AmericaLocation : MICHIGANContact : Mario Mazzuca

Columbus Components Group (CCG)Dec 03, 2009 10:00 AMStamping Presses.Location : Columbus, INDIANAContact : Taso Sofikitis 248-569-9781

Ronart IndustriesDec 15, 2009 10:00 AMTool & Die / Location : Detroit, MICHIGANContact : Taso Sofikitis 248-569-9781

Solartec IncDec 17, 2009 10:00 AMStamping Presses, Feed Lines, Mills, Drills, Grinders, Etc.Location : Salem, OHIOContact : Taso Sofikitis 248-569-9781

ABB Paint RobotsOngoing (8) ABB Paint RobotsWixom, MICHIGANContact : Mario Mazzuca

CNC Machining CenterOngoing No DescriptionVancouver, BRITISH COLUMBIAContact : Danny Mose 604-675-2234

Tennoner for saleOngoing No DescriptionVancouver, BRITISH COLUMBIAContact : Danny Mose 604-675-2234

Pittsburgh Glass WorksOngoing Liquidation of Surplus Assets of Pittsburgh Glass WorksHawkesbury, ONTARIOContact : Jim Hodder 416-242-3560

WalbridgeOngoing Centrifuges and Heat Exchangers surplus to ongoing operations.New Hudson, MICHIGANContact : Taso Sofikitis 248-569-9781

American Axle & Manufacturing (AA&M)

TIME : Nov 11, 2009 - Nov 12, 2009 10:00 AM

LOCATION: 1840 Holbrook AveDetroit, MICHIGAN

TERMS AND CONDITIONS

PAYMENT: MUST BE MADE IN FULL DAY OF SALE. PAYMENT IS CASH, CASHIER'S CHECK, CERTIFIED CHECK, WIRE TRANSFER, COMPANY CHECK ONLY IF ACCOMPANIED BY A LETTER FROM YOUR BANK GUARANTEEING AMOUNT OF CHECK FOR DEPOSIT AND/OR PAYMENT IN FULL. NO PERSONAL CHECKS. FULL PAYMENT MUST BE MADE BEFORE REMOVAL OF PURCHASE.

REMOVAL: LAST DAY OF REMOVAL IS FRIDAY, DECEMBER 4, 2009 BY 5:00 PM , AND AS FURTHER DEFINED IN THE SALE CATALOGUE. EVERYTHING IS SOLD "AS IS, WHERE IS". ALL SALES FINAL. COST AND RESPONSIBILITY FOR REMOVAL OF PURCHASE REMAINS WITH THE PURCHASER. EVERY EFFORT WILL BE MADE TO FACILITATE REMOVAL. WHILE QUANTITIES AND DESCRIPTIONS ARE BELIEVED TO BE ACCURATE, THE AUCTIONEER, OWNERS OR COUNSEL MAKE NO WARRANTIES OR GUARANTEES EITHER EXPRESSED OR IMPLIED AS TO AUTHENTICITY, GENUINENESS OF, OR DEFECTS IN ANY LOT AND WILL NOT BE HELD RESPONSIBLE FOR ANY ADVERTISING DISCREPANCIES OR INACCURACIES. NO WARRANTIES WHATSOEVER ARE MADE AS TO CONDITION, MERCHANTIBILITY OR FITNESS FOR USE OF ANY ITEM. MAY WE SUGGEST YOU TAKE FULL ADVANTAGE OF THE PREVIEW AND INSPECTION PERIOD. SALE SUBJECT TO ADDITIONS, DELETIONS AND PRIOR SALE.PLEASE REFER TO YOUR BIDDER CARD FOR A COMPLETE LISTING OF THE TERMS AND CONDITIONS.

Buyers Premium 13.5 % Live, 16 % On-Line

- Page 1 -

1 WILTON 6" SWIVEL BASE BENCH VISE, (C-27) [Located at PLANT 5]

2 INGERSOLL RAND 1" PNEUMATIC IMPACT WRENCH, (C-27) [Located at PLANT 5]





7 LOT: (2)1" PNEUMATIC IMPACT WRENCHES, (C-27) [Located at PLANT 5]

8 LOT: (2)1" PNEUMATIC IMPACT WRENCHES, (C-27) [Located at PLANT 5]

9 LOT: (2)1 1/2" PNEUMATIC IMPACT WRENCHES, (A-27) [Located at PLANT 5]

10 LOT: ASSTD 1 1/2" SOCKETS, (C-23) [Located at PLANT 5]

11 LOT: ASSTD 1" SOCKETS, (C-23) [Located at PLANT 5]

12 PNEUMATIC HAMMER, (A-27) [Located at PLANT 5]

13 PNEUMATIC GRINDER, (A-27) [Located at PLANT 5]

14 Qty (2) of PNEUMATIC GRINDERS, (C-27) [Located at PLANT 5]

15 HILTI TE 55 ELECTRIC HAMMER DRILL, (A-25) [Located at PLANT 5]

16 BOSCH 11227E ELECTRIC HAMMER DRILL, (A-25) [Located at PLANT 5]

17 MILWAUKEE ELECTRIC ROTARY HAMMER, (A-25) [Located at PLANT 5]

18 ELECTRIC DRILL, [Located at PLANT 5]

19 MILWAUKEE MAG DRILL, (B-27) [Located at PLANT 5]



21.01 WILTON TAPPING ARM W/TABLE AND VISE, (B-27) [Located at PLANT 5]

22 Qty (2) of PNEUMATIC PUMPS, (A-27) [Located at PLANT 5]

23 REEL CRAFT HOSE REEL, (A-27) [Located at PLANT 5]

24 LOT: ASSTD JACK STANDS, (A-27) [Located at PLANT 5]

25 PORTER SPRING WINDER, (A-26) [Located at PLANT 5]

26 SAFETY BOY Qty (2) of FLANGE SPREADERS, (A-26) [Located at PLANT 5]

27 LOT: ASSTD WRENCHES, (B-24) [Located at PLANT 5]

28 LOT: ASSTD WRENCHES, (B-23) [Located at PLANT 5]

29 LOT: (9) ASSTD H.D. C-CLAMPS, (A-26) [Located at PLANT 5]

- Page 2 -

30 LOT: ASSTD C-CLAMPS, (A-26) [Located at PLANT 5]

31 LOT: ASSTD C-CLAMPS, (A-26) [Located at PLANT 5]

31.01 LOT: ASSTD T.S. DRILLS, (1 BOX); (B-26) [Located at PLANT 5]



31.04 LOT: ASSTD T.S. DRILLS, (2 BOXES); (B-26) [Located at PLANT 5]


31.06 LOT: ASSTD T.S. DRILLS, (2 BOXES); (A-26) [Located at PLANT 5]

31.07 LOT: ASSTD DRILLS, (7 BOXES); (A-26) [Located at PLANT 5]

31.08 LOT: ASSTD DRILL SLEEVES, (2 BOXES); (A-26) [Located at PLANT 5]

31.09 LOT: ASSTD END MILLS, (1 BOX); (B-26) [Located at PLANT 5]



31.12 LOT: ASSTD END MILLS, (2 BOXES); (B-26) [Located at PLANT 5]

31.13 LOT: ASSTD END MILLS, (3 BOXES); (B-26) [Located at PLANT 5]

31.14 LOT: ASSTD SPADE DRILLS, (2 BOXES); (B-26) [Located at PLANT 5]

31.15 LOT: ASSTD TAPS, (2 BOXES); (B-26) [Located at PLANT 5]

31.16 LOT: ASSTD TAPS, (1 BOX); (B-26) [Located at PLANT 5]

31.17 LOT: ASSTD DIES, (3 BOXES); (AA-26) [Located at PLANT 5]

31.18 LOT: ASSTD CUTTING TOOLS, (3 BOXES); (B-27) [Located at PLANT 5]

31.19 LOT: ASSTD BORING BARS, (AA-26) [Located at PLANT 5]

31.2 LOT: ASSTD INSERT TOOL HOLDERS, (3 BOXES) (AA-26) [Located at PLANT 5]

31.21 LOT: ASSTD INSERT TOOL HOLDERS, (1 BOX) (B-25) [Located at PLANT 5]



32 LOT: ASSTD HAND STAMPS W/CART, (A-25) [Located at PLANT 5]

33 LOT: ASSTD HAND STAMPS, (E-25) [Located at PLANT 5]

34 8" MACHINE VISE, (A-25) [Located at PLANT 5]

35 DOALL 6" MACHINE VISE, (A-25) [Located at PLANT 5]

36 SIMCO 6" COMPOUND MACHINE VISE, (A-25) [Located at PLANT 5]

37 4" SINE VISE, (A-25) [Located at PLANT 5]

38 CMC CLIMAX KEY MILL, (A-25) [Located at PLANT 5]

38.01 WHEEL BALANCER, (B-25) [Located at PLANT 5]

39 WALKER CERAMAX 9" X 18" PERMANENT MAGNETIC CHUCK, (A-

- Page 3 -

24) [Located at PLANT 5]39.01 WALKER CERAMAX 9" X 18"

PERMANENT MAGNETIC CHUCK, (A-24) [Located at PLANT 5]

40 9" X 18" PERMANENT MAGNETIC CHUCK, (A-24) [Located at PLANT 5]

41 9" X 18" PERMANENT MAGNETIC CHUCK, (A-24) [Located at PLANT 5]

42 Qty (2) of 6" X 12" PERMANENT MAGNETIC CHUCK, (A-24) [Located at PLANT 5]

42.01 COMPOUND SINE PLATE, (A-24) [Located at PLANT 5]

43 SCREW JACKS, (A-24) [Located at PLANT 5]

43.01 LOT: BORING HEAD AND TAPPING HEAD, (A-24) [Located at PLANT 5]

44 LOT: ASSTD HAND TOOLS, (AA-17) [Located at PLANT 5]

45 LOT: (4) ASSTD PIPE WRENCHES, (A-26) [Located at PLANT 5]

46 RIDGID 700 ELECTRIC PIPE THREADER, HAND HELD; W/14 DIES (AA-24) [Located at PLANT 5]

47 RIDGID HAND PIPE THREADER W/24 DIES, (AA-24) [Located at PLANT 5]

48 RIDGID LOT: ASSTD RIDGID DIE HEADS, (AA-24) [Located at PLANT 5]

49 RIDGID MC-450 PIPE DRILL, (AA-24) [Located at PLANT 5]

50 RIDGID LOT: ASSTD RIDGID ACCESSORIES, W/BENCH; (A-24) [Located at PLANT 5]

51 RIDGID/KOLLMAN K-50 DRAIN OPENER, (AA-24) [Located at PLANT 5]

52 RIDGID Qty (4) of DRAIN SNAKES, (AA-24) [Located at PLANT 5]

53 LOT: ASSTD TUBE BENDING DIES, (AA-24) [Located at PLANT 5]

54 ATLAS Qty (2) of ADJUSTABLE ROLLER PIPE STANDS, (A-24) [Located at PLANT 5]

55 MITUTOYO 40" VERNIER CALIPER, (A-26) [Located at PLANT 5]

56 Qty (3) of 25" VERNIER CALIPERS, (A-26) [Located at PLANT 5]

57 Qty (2) of INSIDE MICROMETER SETS, (A-26) [Located at PLANT 5]

58 LOT: ASSTD INSPECTION PIECES, (A-26) [Located at PLANT 5]

59 ENERPAC ELECTRIC HYDRAULIC UNIT 1 1/2 H.P., 10,000 PSI (AA-27) [Located at PLANT 5]

60 ENERPAC ELECTRIC HYDRAULIC UNIT 1 1/2 H.P., 10,000 PSI (AA-26) [Located at PLANT 5]

61 ENERPAC ELECTRIC HYDRAULIC UNIT 1 H.P., 10,000 PSI (AA-26) [Located at PLANT 5]

62 ENERPAC ELECTRIC HYDRAULIC UNIT 1 H.P., 10,000 PSI (AA-26) [Located at PLANT 5]

63 ENERPAC ELECTRIC HYDRAULIC UNIT, (AA-26) [Located at PLANT 5]

64 ELECTRIC HYDRAULIC UNIT 1 H.P., 10,000 PSI (AA-26) [Located at PLANT 5]

65 ELECTRIC HYDRAULIC UNIT 1/2 H.P., 10,000 PSI (AA-25) [Located at PLANT 5]

- Page 4 -

65.01 ENERPAC HUSHH PUP 1 H.P. 10,000 PSI HYDRAULIC UNIT, (A-3) [Located at PLANT 5]

66 ENERPAC LOT: (3) HYDRAULIC PORTA-POWERS, (AA-26) [Located at PLANT 5]

67 ENERPAC Qty (3) of ENERPAC HYDRAULIC PORTA-POWERS, (AA-26) [Located at PLANT 5]

68 ENERPAC LOT: (3) HYDRAULIC PORTA-POWERS, (AA-25) [Located at PLANT 5]

69 EVERPAC HYDRAULIC JACK, (AA-26) [Located at PLANT 5]





74 EVERPAC Qty (2) of HYDRAULIC JACKS, (AA-26) [Located at PLANT 5]





79 EVERPAC Qty (2) of HYDRAULIC JACKS, (A-25) [Located at PLANT 5]



82 C-M Qty (2) of 1 1/2-TON COME ALONGS, (B-25) [Located at PLANT 5]

83 LOT: (2) ASSTD COME ALONGS, (B-25) [Located at PLANT 5]

84 JET 1/2-TON CHAIN HOIST 9B-25), [Located at PLANT 5]

85 LIFTING MAGNET, (A-24) [Located at PLANT 5]

86 LOT: EYE BOLTS AND SHACKLES, (A-24) [Located at PLANT 5]

87 LOT: ASSTD CHAINS, (A-22; A-23) [Located at PLANT 5]

88 LOT: ASSTD CHAINS, (IN TWO BARRELS); (A-22) [Located at PLANT 5]

89 LOT: ASSTD SLINGS, (A-22) [Located at PLANT 5]

90 LOT: ASSTD CABLE SLINGS, (A-22) [Located at PLANT 5]

91 LOT: (4) ASSTD BLOWERS, (A-22) [Located at PLANT 5]

92 WESCO DIE LIFT CART, 750 LBS CAPACITY [Located at PLANT 5]

93 Qty (2) of SAW HORSES 40,000 LBS CAPACITY, (C-20) [Located at PLANT 5]

94 BANDING CARTS, (C-20) [Located at PLANT 5]

95 Qty (4) of ROLLER STANDS, (C-21) [Located at PLANT 5]

96 LOT: (2) ASSTD GREASE UNITS, (C-21) [Located at PLANT 5]

96.01 PORTABLE HYDRAULIC PUMP, (A-2)

- Page 5 -

[Located at PLANT 5]96.02 LANDA 3.5 H.P. POWER WASHER, (A-

2) [Located at PLANT 5]

97 GREENERD NO 58 ARBOR PRESS, (C-20) [Located at PLANT 5]

98 KALAMAZOO SANDER 6" BELT, 12" DISC; (C-20) [Located at PLANT 5]

99 DOUBLE END PEDESTAL GRINDER, (C-19); STANDARD 12" [Located at PLANT 5]

100 BALDOR DOUBLE END PEDESTAL GRINDER, (C-19); 2 H.P. 12" [Located at PLANT 5]

101 BALDOR DOUBLE END PEDESTAL GRINDER, (C-20); 3/4 H.P.; 8" [Located at PLANT 5]

102 DAYTON 8" DOUBLE END PEDESTAL GRINDER, (C-19) [Located at PLANT 5]

103 BALDOR DOUBLE END PEDESTAL GRINDER, (C-17); 3/4 H.P.; 8" [Located at PLANT 5]

104 6" DOUBLE END PEDESTAL GRINDER, (A-23) [Located at PLANT 5]

105 CINCINNATI 6" DOUBLE END PEDESTAL GRINDER, (C-19) [Located at PLANT 5]

106 6" DOUBLE END PEDESTAL GRINDER, (G-20) [Located at PLANT 5]

107 12" DOUBLE END PEDESTAL GRINDER, (G-1) [Located at PLANT 5]

108 SETCO 10" DOUBLE END PEDESTAL GRINDER, (C-9) [Located at PLANT 5]


110 BALDOR TOOL POST GRINDER, (C-19) [Located at PLANT 5]

111 DAREX DRILL SHARPENER, (C-19) [Located at PLANT 5]

112 STERLING DRILL SHARPENER, (C-19) [Located at PLANT 5]

113 LOT: BALDOR GRINDER, WILTON VISE; AND BENCH (B-26) [Located at PLANT 5]

114 LOT: ROPER WHITNEY PUNCH, VISE; AND STEEL TABLE (B-26) [Located at PLANT 5]

115 K1 10" ABRASIVE CUTOFF SAW W/TABLE, (C-24) [Located at PLANT 5]

116 K1 10" ABRASIVE CUTOFF SAW, (C-22) [Located at PLANT 5]

117 WILTON HORIZONTAL BAND SAW W/CART, (C-19) [Located at PLANT 5]


119 BALDOR 12" DOUBLEEND PEDESTAL GRINDER, (A-8); 2 H.P. [Located at PLANT 5]

120 Qty (2) of ELECTRIC HEATERS, (A-9) [Located at PLANT 5]

121 LOT: 8' X 4' STEEL TABLE W/8" VISE, AND PIPE VISE (A-28) [Located at PLANT 5]

122 LOT: 70" X 48" STEEL TABLE, W/8" VISE AND PIPE VISE (A-28) [Located at PLANT 5]

123 LOT: 7' X 5' STEEL TABLE W/8" VISE, AND 6" VISE (D-29) [Located at PLANT 5]

124 LOT: 8' X 3' STEEL TABLE W/PARTS,

- Page 6 -

BINS; (2) VISES (B-25) [Located at PLANT 5]

125 TELEDYNE HYDRAULIC TUBE BENDER, 10,000 PSI CAPACITY (A-28) [Located at PLANT 5]

126 DAVIS AUTO-MATIC MECHANICAL KEYSEATER, BT# DF KC101; (Plt 5); Col# A-20 [Located at PLANT 5]

127 CINCINNATI NO. 2 TOOL & CUTTER GRINDER, S/N 102T5A-229; BT# 152TTF; (Plt 5); Col# A-2 [Located at PLANT 5]

127.01 CINCINNATI 220-8 CENTERLESS GRINDER, [Located at Warren, MI]

128 ZEKS HEAT SINK UNIT, (E-15) [Located at PLANT 5]

129 ZEKS HEAT SINK UNIT, (A-3) [Located at PLANT 5]

130 OHMA 36-TON AIR OVER OIL PRESS, (C-18) [Located at PLANT 5]








138 WILTON 4 1/2" SWIVEL BASE BENCH VISE, (E-11) [Located at PLANT 6]

139 B & D 3/4" H.D. MAGNETIC BASE DRILL, (E-11) [Located at PLANT 6]

140 Qty (3) of 1" PNEUMATIC IMPACT WRENCH, (E-11) [Located at PLANT 6]

141 Qty (2) of PNEUMATIC IMPACT WRENCH, (E-11) [Located at PLANT 6]

142 GARDNER DENVER PNEUMATIC GRINDER, (E-11) [Located at PLANT 6]

143 BIAX ELECTRIC SCRAPER, (E-11) [Located at PLANT 6]

144 CM CYCLONE 2-TON CHAIN HOIST, (E-1) [Located at PLANT 6]

145 PROTO 1" SOCKET SET, (F-11) [Located at PLANT 6]

146 LOT: ASSTD WRENCHES, (F-11) [Located at PLANT 6]

147 RIDGID 36" PIPEWRENCH, (F-11) [Located at PLANT 6]

148 LOT: FLARING TOOL & TUBE BENDER, (F-11) [Located at PLANT 6]

149 LOT: ASSTD WHEEL PULLERS, (F-11) [Located at PLANT 6]

150 LOT: ASSTD ALLEN WRENCHES, (F-11) [Located at PLANT 6]

151 LOT: ASSTD EYE BOLTS & CHAIN, (F-11) [Located at PLANT 6]

152 HARTFORD SUPPER SPACER, (F-11) [Located at PLANT 6]

153 LOT: (4) SETS OF FLEX COLLETS, (F-11) [Located at PLANT 6]

154 TABLE TOP CARBID TOOL GRINDER, (F-11) [Located at PLANT 6]

155 SKF TIH030 INDUCTION HEATHER, (

- Page 7 -

F-11) [Located at PLANT 6]156 LOT: ASSTD INSERT TOOL HOLDERS

, (F-11) [Located at PLANT 6]

157 LOT: ASSTD CUTTERS, (IN 6 BOXES); (F-11) [Located at PLANT 6]

158 LOT: ASSTD CARBIDE INSERTS, (IN 3 BOXES); (E-11) [Located at PLANT 6]

159 LOT: ASSTD CENTERS AND DRILL CHUCKS, (1 BOX); (E-11) [Located at PLANT 6]

160 LOT: ASSTD T.S. DRILLS, (IN 3 BOXES); (E-11) [Located at PLANT 6]

161 LOT: ASSTD DRILLS, (IN 6 BOXES); (E-11) [Located at PLANT 6]

162 LOT: ASSTD DRILL SLEEVES, (1 BOX); (E-11) [Located at PLANT 6]

163 LOT: ASSTD REAMERS, (1 BOX); (E-11) [Located at PLANT 6]

164 LOT: ASSTD TAPS AND REAMERS, (E-11) [Located at PLANT 6]

164.01 LOT: ASSTD BROACHES, [Located at PLANT 5]

165 LOT: ASSTD HAND TOOLS, (F-11) [Located at PLANT 5]

166 LOT: ASSTD SAFETY HARNESSES, (F-11) [Located at PLANT 5]

167 STARRETT 18" VERNIER HEIGHT GAGE, (E-11) [Located at PLANT 5]

168 LOT: (2) ASSTD 25" VERNIER CALIPERS, (E-11) [Located at PLANT 5]

169 SUBURBAN CYLINTRACAL SQUARE, (E-11) [Located at PLANT 5]

170 Qty (2) of PROMAT SQUARES, [Located at PLANT 5]

171 LOT: ASSTD INSPECTION PIECES, (E-11) [Located at PLANT 5]

172 GRANITE PARALLELS, (1) SET 30" X 4" X 1 1/2"; (E-11) [Located at PLANT 5]

173 LOT: ASSTD PARALLELS, [Located at PLANT 5]

174 ENERPAC 12-TON HOLL-O-RAM, (F-11) [Located at PLANT 5]

175 GREENLEE 1818 TUBE BENDER, (F-13) [Located at PLANT 5]

176 8' X 4' STEEL TABLE , W/ (2) VISES; HOLE PUNCH; AND SHEAR; (F-13) [Located at PLANT 5]

177 8' X 4' STEEL TABLE, (F-13) [Located at PLANT 5]

178 BALDOR 8" 3/4 H.P. DOUBLE END PEDESTAL GRINDER, (E-12) [Located at PLANT 5]

179 HAMMON 12" DOUBLE END PEDESTAL GRINDER 1800 RPM , (F-12) [Located at PLANT 5]

180 DAKE 3A1 ARBOR PRESS, (F-13) [Located at PLANT 5]

181 DORINGER D350 12" METAL CUTTING COLD SAW, S/N 18780; Miter Vise; (Plt 6-5); Col# F-12, [Located at PLANT 5]

182 EVERETT 12M 12" ABRASIVE CUT-OFF SAW, S/N 5-1541; Cabinet Base; Miter Head; (Plt 6-5); Col# F-12 [Located at PLANT 5]

183 WILTON 3020 20" VERTICAL BANDSAW, S/N 83E1028; Blade Welder/Grinder; BT# NA; (Plt 6-5); Col# E-12 [Located at PLANT 5]

- Page 8 -

184 24" DRILL PRESS, (E-12) [Located at PLANT 5]

185 HYDRAULIC H-FRAME SHOP RESS, (E-12) [Located at PLANT 5]

186 AMERICAN STYLE C 15" X 54" ENGINE LATHE, S/N 76539-61; Actual Swing 21" Over Ways; 60" Centers; (12) Spindle Speeds 30 - 2000 RPM; Threading; Taper Attachment; 2" Hole-Thru Spindle; AcuRite Turn Mate DRO; BT# 15327; (Plt 6-5); Col# E-12 [Located at Plant 6]

187 AMERICAN STYLE C 16" X 78" ENGINE LATHE, S/N 76537-61; 21" x 84" Actual; (27) Spindle Speeds 30 - 2000 RPM; Quick Change Threading; Taper Attachment; 2-1/8" Hole-Thru Spindle; AcuRite III DRO; BT# 15325; (Plt 2-6); Col# N-34, [Located at Plant 2]

188 10" DIE BENCH GRINDER, With Steel Base; (Plt 2-6); Col# N-32, [Located at Plant 2]

189 TORIT 19-FB 2-HP DUST COLLECTOR, S/N J-1471; With Cyclone & Cabinet; BT# 32641; (Plt 2-6); Col# N-32 [Located at Plant 2]

190 WILTON 4200 6" BELT/12" DISC COMBINATION GRINDER, S/N 09085; (Plt 2-6); Col# M-31; [Located at Plant 2]

191 KALAMAZOO 2" BELT VERTICAL ABRASIVE BELT GRINDER, With Stand; (Plt 2-6); Col# M-31, [Located at Plant 2]

192 GREENERD NO. 4 FLOOR TYPE ARBOR PRESS, S/N NA; (Plt 2-6); Col# N-33, [Located at Plant 2]

193 GREENERD NO 4 ARBOR PRESS, (N-33) [Located at Plant 2]

194 DAKE 50-TON H-FRAME HYDRAULIC SHOP PRESS, S/N NA; Manual Hydraulics; (Plt 2-6); Col# N-32 [Located at Plant 2]

195 TENNSMITH CB-30 30" HAND BRAKE, (N-30) [Located at Plant 2]

196 EXCELLO STYLE 74 CENTER LAP MACHINE, S/N 528; BT# 10733; (Plt 2-6); Col# M-36, [Located at Plant 2]

197 SUNNEN MBB-1660 PRECISION HORIZONTAL HONING MACHINE, S/N 91753; (Plt 2-6); Col# N-33, [Located at Plant 2]

198 EXCELLO STYLE L-26-P 6" DOUBLE-END CARBIDE TOOL GRINDER, S/N 1261; With Steel Base; BT# 8394; (Plt 2-6); Col# M-35, [Located at Plant 2]

199 THOMPSON 4B 12" X 48" HYDRAULIC SURFACE GRINDER, S/N 4B687681; 12" x 48" Electromagnetic Chuck; 12" x 63" Table; Overhead Dresser; External Coolant; BT# 601848; (Plt 2-6); Col# M-36, [Located at Plant 2]

200 OKAMOTO ACC-8-20DX 8" X 20" HYDRAULIC SURFACE GRINDER, S/N 62350; Electromagnetic Chuck; Coolant; With 5" Magnetic Separator; BT# NA; (Plt 2-6); Col# N-36, [Located at Plant 2]

201 PARKER MAJESTIC ZV 6" X 18" HAND FEED SURFACE GRINDER, S/N 4076-ZV-82; 6" x 12" Walker Electromagnetic Chuck; With Variable Microprocessor Control; Power Elevation;

- Page 9 -

BT# 33107; (Plt 2-6); Col# M-36, [Located at Plant 2]

202 BROWN & SHARPE 824 MICROMASTER 8" X 24" HYDRAULIC SURFACE GRINDER, S/N 523-824-875; (Not In Service - No Spindle); BT# 31537; (Plt 2-6); Col# N-35, [Located at Plant 2]

203 BLANCHARD NO. 18D 36" VERTICAL SPINDLE ROTARY SURFACE GRINDER, S/N 10373; 36" Diameter Electromagnetic Chuck; 18" Diameter Segmented Grinding Wheel; 30-HP Wheel Head; External Coolant; BT# 15045; (Plt 4-6); Col# M-36, [Located at Plant 2]

204 SUNDSTRAND-ARTER 16" HORIZONTAL SPINDLE ROTARY SURFACE GRINDER, S/N 8167; 16" Diameter Grinding Wheel; 17" Diameter Electromagnetic Chuck; 7-1/2-HP; Coolant; BT# 15286; (Plt 2-6); Col# M-36 [Located at Plant 2]

205 BROWN & SHARPE 1460U 14" X 60" UNIVERSAL OD/ID GRINDER, S/N 521-1460-114; Universal Wheelhead; Drop-Down Belt Driven ID Spindle; Motorized Workhead With 9" Diameter Permanent Magnetic Chuck; Coolant; Tailstock; Acu-Rite DRO; BT# 31323; (Plt 2-6); Col# M-36 [Located at Plant 2]

206 CINCINNATI NO. 650-20 DUAL POWER VERTICAL MILLING MACHINE, S/N 310555VSY-1AR-88; Spindle Speeds 14 - 1400 RPM; Table Size 20" x 104-1/2"; 50 Taper With Power Drawbar; Coolant; BT# 15320; (Plt 2-6); Col# M-35, [Located at Plant 2]

207 ROCKFORD VERTICAL SLOTTER, SN NA; 28" Diameter Table; BT# 15028; (Plt 2-6); Col# M-35 [Located at Plant 2]

208 PRATT & WHITNEY B 12" VERTICAL SLOTTER, S/N 547; 24" Diameter Table; BT# 864; (Plt 2-6); Col# M-36, [Located at Plant 2]

209 BARBER COLMAN TYPE A GEAR HOBBER, S/N 163; BT# 7020; (Plt 2-6); Col# N-35, [Located at Plant 2]

210 OIL GEAR HORIZONTAL HYDRAULIC BROACH, S/N 14926; (Disconnected); BT# 7088; (Plt 2-6); Col# N-35, [Located at Plant 2]

211 CINCINNATI BICKFORD SUPER SERVICE 24" BOX COLUMN SLIDING HEAD DRILL, S/N NA; Power Down Feed; (12) Speeds 60 - 1000 RPM; 14" x 21" T-Slotted Adjustable Table; BT# 13414; (Plt 2-6); Col# N-34, [Located at Plant 2]

212 CARLTON 6' ARM X 17" COLUMN RADIAL DRILL, S/N 4A4628; 15 - 1500 RPM; Half-Round Base; (2) Plain Box Tables; BT# 14814; (Plt 5); Col# F-20, [Located at Plant 5 ]

213 AMERICAN 4' ARM X 11" COLUMN RADIAL DRILL, S/N 272X-64; Spindle Speeds 45-2250 RPM; Universal Box Table; BT# 17251; (Plt 5); Col# A-20 [Located at Plant 5 ]

214 MATTISON 18" X 72" HYDRAULIC SURFACE GRINDER, S/N 22059; Dual

- Page 10 -

36" Electromagnetic Chucks; Overhead Dresser; (Plt 5); Col# E-13; [Located at Plant 5 ]

215 TOS HOLICE BPH 320A 12" X 39" HYDRAULIC SURFACE GRINDER, S/N 182-421; Electromagnetic Chuck; Dresser; Coolant; Newall 2-Axis DRO; (Plt 5); Col# D-27, [Located at Plant 5 ]

216 CINCINNATI HYDRO TEL VERTICAL MILLING MACHINE, S/N 31311V5V-22; 28" x 96" Table; Spindle Speeds 52 - 1300 RPM; Hydraulic Tracer; BT# 20328; (Plt 5); Col# C-22, [Located at Plant 5 ]

217 BRIDGEPORT SERIES II 4-HP VERTICAL MILLING MACHINE, S/N 7717; 11" x 58" Table; 50 - 3500 RPM; AcuRite 3-Axis DRO; BT# DF-DRM3; (Plt 5); Col# A-21; [Located at Plant 5 ]

218 CINCINNATI TOOLMASTER VERTICAL MILLING MACHINE, S/N NA; 10" x 42" Table; Power Feeds; 85 - 3800 RPM; BT# DF-DRM2; (Plt 5); Col# A-20, [Located at Plant 5 ]

219 AMERICAN STYLE 'J-9' SIZE 40" X 180" ENGINE LATHE, S/N 74809-56; Actual 56" Swing x 190"; 40" Swing Over Carriage; (18) Spindle Speeds 7 - 600 RPM; Threading; Taper Attachment; 2-7/8" Hole-Thru Spindle; 28" 4-Jaw Chuck; Tailstock; Steady Rest; Sargon 3-Axis DRO; BT# 14448; (Plt 5); Col# C-25, [Located at Plant 5 ]

220 AMERICAN STYLE E SIZE 20" X 168" ENGINE LATHE, S/N 76616-61; Actual 27" Swing x 178"; (27) Spindle Speeds 18 - 1200 RPM; Taper Attachment; Threading; 2-1/2" Hole-Thru Spindle; 18" 4-Jaw Chuck; Tailstock; Steady Rest; Newall 2-Axis DRO; BT# DFLA103; (Plt 5); Col# C-24, [Located at Plant 5 ]

220.01 LOT: (6) ASSTD CHUCKS W/RACK, [Located at Plant 5 ]

221 LEBLOND REGAL 24" X 72" GEARED HEAD HOLLOW SPINDLE ENGINE LATHE, S/N 2H745; 5" Hole-Thru Spindle; Front & Rear Chucks; (12) Spindle Speeds 16 - 1200 RPM; Quick Change Threading; Taper Attachment; Tailstock; (2) Steady Rests; BT# 003147; (Plt 5-1); Col# C-9; [Located at Plant 5 ]

222 MONARCH 2013X50 20" X 54" ENGINE LATHE, S/N 50040; Spindle Speeds 12 - 1500 RPM; Threading; Taper Attachment; 2" Hole-Thru Spindle; (No Chuck); BT# 003277; (Plt 5); Col# C-25 [Located at Plant 5 ]

223 AMERICAN STYLE E SIZE 20" X 48" HYDRAULIC TRACER LATHE, S/N 78094/67; (27) Spindle Speeds 18 - 1630 RPM; Threading; American Planet 360 Degree Hydraulic Tracer; 2-1/1" Hole-Thru Spindle; 18" 3-Jaw Chuck; BT# 23224; (Plt 5-1); Col# C-16, [Located at Plant 5 ]

224 DOALL JOB SELECTOR C-4100NC 16" CAPACITY AUTOMATIC HORIZONTAL METAL CUTTING BANDSAW, S/N 505-93121; (1993); Cincinnati Electrosystems NC Programmable Control; Power Shuttle

- Page 11 -

Infeed & Clamping; Chip Removal Auger; BT# 107531; (Plt 5-1); Col# C-10; [Located at Plant 5 ]

225 DOALL C-1220A 20" X 18" CAPACITY HORIZONTAL METAL CUTTING BANDSAW, S/N 402-83160; Hydraulic Power Shuttle Infeed & Clamping; Coolant; BT# 815TF; (Plt 5-1); Col# C-10, [Located at Plant 5 ]

226 TRINCO 60X48NSL/PC ABRASIVE DRY BLAST CABINET, S/N 58018-3; 60" x 48" Cabinet; Pressurized Vessel Tank; Dust Collector; BT# NA; (Plt 5); Col# C-15, [Located at Plant 5 ]

227 BELMONT MAXI-CUT ZNC S-26 HOLE BURNER EDM, S/N 000118; Programmable Controls; BT# 608319; (Plt 5); Col# A-19, [Located at Plant 5 ]

228 LUCAS 542B144 5" TABLE TYPE HORIZONTAL BORING MILL, S/N NA; 60" x 146" Table; Spindle Speeds 9 - 1200 RPM; 60" Vertical Travel; 50 Taper; AcuRite 3-Axis DRO; 4-Way Bed BT# 23761/DF-DRBM3; (Plt 5) Col# F-6; [Located at Plant 5 ]

228.01 LOT: (3) ASSTD ANGLE PLATES, (G-5) [Located at Plant 5 ]

229 DEVLIEG NO. 5K-96 NC SPIRAMATIC JIGMIL, S/N 10070; 50" x 96" Table; Spindle Speeds 10 - 1000 RPM; Allen Bradley 7320 Numerical Control; BT# 22843; (Plt 5-1); Col# C-18 [Located at Plant 5 ]

230 DEVLIEG 3B-48 SPIRAMATIC JIGMIL, S/N NA; Table Size 30" x 48"; Spindle Speeds 25 -1200 RPM; AcuRite 3-Axis DRO; BT# 22124; (Plt 5); Col# C-12, [Located at Plant 5 ]

231 TOS VARNSDORF W106A 3-7/8" TABLE TYPE BORING MILL, S/N 31-32; (1992); 49" x 49" Built-In Rotary Table; Spindle Speeds 7.5 - 1120 RPM; 23" Built-In Facing Head; No. 50 Taper; AcuRite DRO; 4-Way Bed; BT# 106195; (Plt 5); Col# C-22 [Located at Plant 5 ]

232 DEVLIEG 3K-48 SPIRAMATIC JIGMIL, S/N 9264; 35" x 48" Table; Spindle Speeds 20 - 2000 RPM; Autocon Dynapath Delta CNC Control; ISO 40 Taper With Power Drawbar; Frostrode Chiller Unit Coolant BT# 106195; (Plt 2-6); Col# M-34; Note: DeVlieg Bullard ID Plate on Electrical Panel Indicates; S/N 9246. Note: Table Fixturing & Workholding May Not Be Included With Machine, [Located at Plant 5 ]

233 DEVLIEG NO. 3B-48 SPIRAMATIC JIGMIL, S/N 7-259; Table Size 30" x 48"; Spindle Speeds 25 - 1200 RPM; 40 Taper; AcuRite III DRO; BT# 15455; (Plt 2-6); Col# M-35, [Located at Plant 5 ]

234 SOCIETE GENEVOISE SIP HYDROPTIC 7A DOUBLE COLUMN TYPE VERTICAL JIG BORE, S/N NA; Table Size 40" x 62"; 50" Max. Height Under Rail; Spindle Speeds 40 - 2000 RPM; Newall DP7 DRO; BT# 30020; (Plt 2-6); Col# L-35, [Located at Plant 5 ]

235 MITSUBISHI MV60C CNC VERTICAL

- Page 12 -

MACHINING CENTER, S/N V60C075; (1995); Table Size 23" x 55"; Travels: 39.3" X; 19.6" Y; 21.7" Z; Spindle Speeds 20 - 4000 RPM; 11/30 Min. KW Spindle Motor; Mitsubishi CNC Controls; CAT 50 Spindle Taper; 24 Pocket ATC; Coolant; Chip Conveyor; BT# 601808; (Plt 2-6) Col# M-34, [Located at Plant 5 ]

236 MITSUBISHI M-V65C CNC VERTICAL MACHINING CENTER, S/N CV6015; Table Size 23" x 47"; 40 Pocket ATC; 50 Taper; Mitsubishi CNC Controls; (Disconnected); (Plt -5) Col# A-13, [Located at Plant 5 ]

237 GLEASON TAG-400 CNC GEAR GRINDER, S/N 1016; (New 1998); Max. Outside Diameter of Gears 15.75"; Max. Wheel Travel; 7.87"; Max/Min. Modul: 0.5 to 8 Modul; Grinding Wheel Diameter: 10.6" to 13.8"; Grinding Wheel Width: 64/84/104mm; Grinding Wheel Speeds: 1000 - 2000 RPM; Dressing Speeds: 50 - 100 RPM; Axis Feeds: X - 118"/Min.; Z - 47"/Min.; V - 98"/Min.; S - 50 -200 pr; C 250 pr; U - 47"/Min.; A - 900 Deg./Min.; Dimensions: L-150" X W-118" X H-97"; Weight: 19,607---LB. [Located at Plant 5 ]

238 MONROE ENVIRONMENTAL OMC-021-2 CENTRALIZED OIL MIST COLLECTOR, S/N 9935323; 2100 CFM Capacity; BT# 605769; (Plt 2-6); Col# M-36, [Located at Plant 5 ]

239 MONROE ENVIRONMENTAL OMC-021-2 CENTRALIZED OIL MIST COLLECTOR, S/N 9935324; 2100 CFM Capacity; BT# 605768; (Plt 2-6); Col# M-36 [Located at Plant 5 ]

240 DAKE 918453 150-TON 4-POST HYDRAULIC PRESS, S/N 165228; Bed Size Between Posts 50"LR x 30"FB; Overall Bed Size 63"LR x 43"FB; Approx. 20" Stroke; Approx. 14" Shot Height; Floor Standing; Top Hydraulics; BT# 605756; (Plt 2-6); Col# N-32, [Located at Plant 5 ]

241 BEHRINGER 310/523G 16" X 12" CAPACITY HORIZONTAL METAL CUTTING BANDSAW, S/N 395110; (1995); Miter Head; 2-Post Frame; Coolant; Blade Speeds 55 - 400 RPM; BT# 601811; (Plt 2-6); Col# M-32, [Located at Plant 5 ]

242 EVERETT 26 26" ABRASIVE CUT-OFF SAW, S/N C-988; 30-HP Saw Duty TE Motor; Power Down Feed; Power Oscillation; BT# 602252; (Plt 2-6); Col# M-31, [Located at Plant 5 ]

243 SOUTH BEND LATHE B-32 24" GEARED HEAD DRILL, S/N 148-E; (9) Spindle Speeds 95 - 1500 RPM; Power Down Feed; 32" x 48" T-Slotted Production Type Table; (Plt 8-3); Col# D-9, [Located at Plant 8]

244 JET JMD-18 BENCH TOP MILL/DRILL, S/N 5028764; 9-1/2" x 32" Table; (Plt 8-3); Col# D-9; [Located at Plant 8]

245 HEALD 273A UNIVERSAL ID GRINDER, S/N 41467; BT# 3031; (Plt 8-2); Col# B-3, [Located at Plant 8]

246 24" VERTICAL BAND SAW, [Located at Plant 8]

- Page 13 -

247 KALAMAZOO 4" BELT SANDER, (D-9) [Located at Plant 8]

248 GREENERD NO 3 1/2 ARBOR PRESS, (D-9) [Located at Plant 8]

249 GREENERD ARBOR PRESS, (E-7) [Located at Plant 8]

250 EMCO MAXIMAT V-13 13" X 40" ENGINE LATHE, S/N D1P8103001; (8) Spindle Speeds 50 - 2000; Quick Change Threading; 1-3/8" Hole-Thru Spindle; BT# 32671; (Plt 8-3); Col# D-9, [Located at Plant 8]

251 GRAYMILLS PARTS WASHER, (E-7) [Located at Plant 8]

252 8' X 3' STEEL TABLE W/VISE, (D-9) [Located at Plant 8]

253 NEW BRITAIN 66 TWIN SPINDLE VERTICAL CHUCKING LATHE, S/N 36565; BT# 33015; (Plt 8-1); Col# D-5 [Located at Plant 8]

254 NEW BRITAIN 66 TWIN SPINDLE VERTICAL CHUCKING LATHE, S/N 36566; BT# 33015; (Plt 8-1); Col# D-5 [Located at Plant 8]

255 MAZAK M-4 2-AXIS FLATBED CNC LATHE, S/N 56514; 22" Swing x 60" Centers; 11" Swing Over Carriage; Front & Rear Toolposts; 8-Position Vertical OD Turning Front Turret; 6-Position Horizontal ID Turning Rear Turret; Programmable Tailstock; Mazatrol T-1 Controls; 12" 3-Jaw Power Chuck; Coolant; Chip Conveyor; (Disconnected; Stored); BT# 33567; (Plt 8-2); Col# C-2, [Located at Plant 8]

256 SAGINAW MACHINE SYSTEMS AC300-2 2-SPINDLE CNC VERTICAL TURNING LATHE, S/N 79406-10/03; (2003); GE Fanuc Controls; R&L 2-Axis Controls; 3-Station Tool Slide; Chip Conveyor; Coolant; (Disconnected); BT# 605164; (Plt B-2); Col# B-3, [Located at Plant 8]

257 DAEWOO PUMA 300GL MODEL 250B, 2-AXIS CNC TURNING CENTER; S/N PM 250782; (2000); BT# 607407; Fanuc Series 16i-T Controls; 12-Position Tool Turret; Programmable Tailstock; Approx. 20" Between Centers; Coolant; Chip Conveyor; Automated Servo Driven Gantry Unloaders; Enclosures; (Plt 8), [Located at Plant 8]



- Page 14 -


261 ANDERSON COOK 350-S MARAND SPLINE ROLLER, S/N 537; Allen Bradley PanelView 600 Control; 48" Underarm Tailstock Support; Auto Load/Unload Transfer Gripper; 60-HP Remote Hydraulic Power Unit; BT# 606776; (Plt 8-4); Col# B-10, [Located at Plant 8]

262 MICROMATIC TEXTRON ROTO-FLO 3251 SPLINE ROLLER, S/N 400-101; 20 & 25-HP Remote Hydraulic Power Unit; 36" Underarm Outboard Support; Auto Load/Unload Transfer With Grippers; Operators Push Button Control Panel; BT# 600170; (Plt 8-4); Col# B-10, [Located at Plant 8]

263 MONROE ENVIRONMENTAL OMC 030-3 CENTRALIZED OIL MIST COLLECTOR, S/N 00-3680-1; 4-Stage Filtration; (Screen; Ashrae; Hepa); With Photohelic Indicator Gauges; BT# 607743; (Plt B-4); Col# B-10, [Located at Plant 8]

264 TOCCO INDUCTION SHAFT HARDENING UNIT, Tocco Inductron Power Supply; DMJ Work Cell; Water Quench; Workstation; S/N 90-3976-22B; Quench Control S/N 90-3976-43; BT# NA; (Plt 8-4); Col# B-9; [Located at Plant 8]

265 TOCCO INDUCTION SHAFT HARDENING UNIT, Tocco Inductron Model 600-10T-03; 600 Kw/9.6 KHz Static Power Supply; S/N 90-3976-2; Control S/N 90-3976-34; Water Quench; DMJ Automation Work Cell; BT# 104574; (Plt 8-4); Col# B-9, [Located at Plant 8]

266 TOCCO INDUCTION SHAFT HARDENING UNIT, Tocco Inductron Model 600-3/10T-06H Power Supply; S/N 95-4691-12; 600Kw/3/10 KHz; Control; S/N 90-3976-34; (Missing PLC) DMJ Automation Work Cell; S/N 1817; Water Quench; BT# 104636; (Plt 8-4); Col# B-9 [Located at Plant 8]

267 AUTO-CON PARTS WASHER, (B-9) [Located at Plant 8]

268 EITEL AMS-40 AUTOMATIC STRAIGHTENER, S/N 25892; (2000); Servo Drives; 24" Centers; BT# 606840; (Plt B-4); Col# C-9, [Located at Plant 8]

269 EITEL RP-25 C-FRAME HYDRAULIC STRAIGHTENING PRESS, S/N 25712; (1994); 24" Work Fixture Centers; Indicator Fixtures; BT# 107480; (Plt 8-4); Col# C-9 [Located at Plant 8]

270 FANUC S-420IF ROBOT, (B-9) [Located at Plant 8]

271 FANUC R-2000IA 165F ROBOT, (B-9) [Located at Plant 8]

272 PROCECO CONVEYORIZED THRU-FEED PARTS WASHER, S/N NA; 12" Wide Opening; Link Chain Conveyor; 25'

- Page 15 -

Length; 2-Stage Wash & Rinse Tanks; With Pumps; Decant Tank System; Allen Bradley PanelView 600 Control; (Disconnected); BT# 620125; (Plt 8-2); Col# B-3, [Located at Plant 8]

273 RANSOHOFF 2-STAGE CONVEYORIZED THRU-FEED WASHER, S/N 4024; 36" Wide Link Chain Conveyor; (1) 7-1/2-HP Pump; (1) 20-HP Pump; Gas Fired Heat; (Disconnected); (Plt 8-2); Col# B-2, [Located at Plant 8]

274 INGERSOLL RAND/CINETIC 28-STATION AUTOMATED ASSEMBLY LINE, (1999); Closed Loop Automated Conveyor; Computer Control Consoles; (Partial; Some Missing); (Plt 8-6); Col# E-12, [Located at Plant 8]

274.01 FANUC R-2000 IA 165F ROBOT (E-12), [Located at PLANT 8]

274.02 FANUC M-16IB20 ROBOT (E-12), [Located at PLANT 8]

274.03 FANUC LR MATE 200 IB5P ROBOT (E-12), [Located at PLANT 8]

274.04 FANUC LR MATE 200I ROBOT (E-12), [Located at PLANT 8]

275 TOYODA FH60B PALLET TYPE CNC HORIZONTAL MACHINING CETNER, S/N NM7584; (1994); # 9 GE Fanuc Series 15-M Controls; 24-3/4" x 24-3/4" Pallets; No. 50 Taper; 48-Station ATC; (Connected into Central Coolant System); BT# 107459; (Plt 2.8); Col# E-22, [Located at Plant 2 ]

276 TOYODA FH60B PALLET TYPE CNC HORIZONTAL MACHINING CENTER, S/N NM7583; (1999) # 8; (Not In Service - Missing Spindle); BT# 107458; (Plt 2-8); Col# E-23, [Located at Plant 2 ]

277 HOLCROFT CARBURIZING HEAT TREAT FURNACE, S/N CJ-4682; (1996) # 6; Four Row Pusher Type; Controlled Atmosphere Gas Burners; 5-Zone Eurotherm Digital Controllers; Wash/Rinse; Temper; Carburize; Burn-Off; Oil Quench; Natural Gas Burn-Off; 3-Zone MMI Carb PC Programmable Carbon Controllers; Unitized Wash & Rinse; With Gas Fired Heat; Approx. 45' Furnace Length; Work Tray Size 18" x 24"; Electrical Control Panels; Automated Closed Loop Power Conveyor System; BT# 602015; (Plt 1-1); Col# A-24 [Located at Plant 1]

278 HOLCROFT CARBURIZING HEAT TREAT FURNACE, S/N NA # 5; Four Row Pusher Type; Controlled Atmosphere Gas Burners; 5-Zone Eurotherm Digital Controllers; Wash/Rinse; Temper; Carburize; Burn-Off; Oil Quench; Natural Gas Burn-Off; 3-Zone MMI Carb PC Programmable Carbon Controllers; Unitized Wash & Rinse; With Gas Fired Heat; Approx. 45' Furnace Length; Work Tray Size 18" x 24"; Electrical Control Panels; Automated Closed Loop Power Conveyor System; BT# 107432; (Plt 1-1); Col# B-24, [Located at Plant 1]

279 EXCELLO 29-STATION CNC TRANSFER MACHINING LINE, 9.5"/10.5" Differential Carrier Line; Master

- Page 16 -

Line Control Console With Allen Bradley PanelView 1400e Control Panel; Individual Station Allen Bradley 9/Series Controls; Corner Control Panels With Allen Bradley PanelView 900 Controls; Mill/Drill/Ream/Tap Machining Stations; Automated Closed Loop Transfer Line Conveying System With Pallet Return; BT# 601907; (Plt 2-5); Also Including: BT# 601908; 18-Station In-Line Transfer Machining; BT# 601909; 28-Station In-Line Transfer Machining; BT# 601910; 3-Way Finish Bore; BT# 601911; 3-Way Finish Bore; BT# 601912; 3-Way Finish Bore; BT# 601913; Centra Spray In-Line Washer [Located at Plant 2]

280 FANUC M-410i 6-AXIS CNC ROBOT, S/N R96746417; (1996); Type A05B-1037-B201; System R-J2 Control; Excello Line South Load/Unload; BT# 602302; (Plt 2-4); Col# I-3, [Located at Plant 2]

281 FANUC M-16iB/20 6-AXIS CNC ROBOT, S/N R05X76362; (2005); Type A05B-1216-B202; System R-J3iB Control; BT# 620180; Excello Line South Cap Load; (Plt 2-4); Col# I-3, [Located at Plant 2]

282 FANUC S-420iF 6-AXIS CNC ROBOT, SN NA; System R-J2 Control; Op 10 Cap & Bolt Load BT# 602304; (Plt 2-4); Col# I-8, [Located at Plant 2]

283 FANUC M-410i 6-AXIS CNC ROBOT, S/N R96746409; (1996); Type A05B-1037-B201; BT# 602303; (Plt 2-4); Col# I-8, [Located at Plant 2]

284 FANUC M-16iB/20 6-AXIS CNC ROBOT, S/N R05X76364; (2005); Type A05B-1216-B202 System R-J3iB Control; BT# 620181; (Plt 2-4); Col# I-3 [Located at Plant 2]

285 FANUC LR MATE 200iB/5P 6-AXIS CNC ROBOT, S/N R05813511; (2005); Type A05B813511; (2005); System R-J3iB Mate Control; BT# 620182; (Plt 2-4); Col# I-3 [Located at Plant 2]

286 EXCELLO 21-STATION CNC TRANSFER MACHINING LINE, 8.6" Differential Carrier Line; Master Line Control Console With Allen Bradley PanelView 1400e Control Panel; Individual Station Allen Bradley 9/Series Controls; Mill/Drill/Ream/Tap Machining Station; Auto Con Automated Transfer Line Conveying System; Closed Loop With Pallet Return Conveyor System; Wash Booth; Corner Control Panels With Allen Bradley PanelView 900 Control Panels; BT# 601920; (Plt 2.4) Col# G-17 to G-20); Also Including: BT# 601921; 23-Station In-Line Transfer Machining; BT# 601922; 3-Position Boring; BT# 601923; 3-Position Boring; BT# 601924; 3-Position Boring; BT# 601925; Centra Spray In-Line Washer [Located at Plant 2]

287 FANUC M-410i 6-AXIS CNC ROBOT, S/N R96846447; (1996); Type A058-1037-BU21; System R-J2 Control; BT# 601920 Excello Line North; Load/Unload; BT# 602318; (Plt 2-5); Col# G-17, [Located at

- Page 17 -

Plant 2]288 FANUC M-16iB/20 6-AXIS CNC

ROBOT, S/N R043766195; (2004); Type A05B-1216-B202; System R-J3iB Control; BT# 606990; Excello Line North; (BT 601920) Load/Unload; (Plt 2-5); Col# G-17 [Located at Plant 2]

289 FANUC R-2000iA/125L 6-AXIS CNC ROBOT, S/N R04806481; (2004); Type A05B-1324-B263; System R-J3iB Control; BT# 608464; North Line Automation; (Plt 2-5); Col# G-21, [Located at Plant 2]

290 FANUC S-420iF 6-AXIS CNC ROBOT, S/N R9681367; (1996); Type AO5B-1313-B501 System R-J2 Control; BT# 602319; Excello Line North Assembly Robot; (Plt 2-5); Col# H-20; [Located at Plant 2]

291 FANUC M-410i 6-AXIS CNC ROBOT, S/N R96846444; (1996); Type A05B-1037-B201; System R-J2 Control; Excello Line North Op10 Unload; BT# 602311; (Plt 2-5); Col# H-20, [Located at Plant 2]

292 FANUC M-16iB/20 6-AXIS CNC ROBOT, S/N R04376233; (2004); Type A05B-1216-B202; System R-J3iB Control; BT# 606991; Excello Line North Cap Unload Robot; (Plt 2-5); Col# H-20 [Located at Plant 2]

293 FANUC LR MATE 200iB/5P 6-AXIS CNC ROBOT, S/N R04313555; (2004); Type A05B-1138-B242; System R-J3iB Mate Control; BT# 606993; Excello Line North Orient Load Robot; (Plt 2-5); Col# H-20 [Located at Plant 2]

294 HELLER 7-STATION FST IN-LINE TRANSFER MACHINING CENTER, 8-1/4" Case; (9) Uni-Pro CNC 90 Control Panel Stations; BT# 603600; (Plt 6-1); Col# D-14, [Located at Plant 6]

295 BK STATION DIAL INDEX MACHINING CELL, S/N NA; US Equipment Reman; S/N W01283; Allen Bradley PanelView Plus 1000 Main Operator Terminal; Allen Bradley PanelView Plus 700 Station Panels; BT# 104520; (Plt 3-4); Col# E-6, [Located at PLANT 3]

296 FANUC R-2000iA/165F 6-AXIS CNC ROBOT, S/N NA; System R-J3iB Control; (BK Dial Load/Unload); (Plt 3-4); Col# F-6 [Located at PLANT 3]

297 GIDDINGS & LEWIS 7-E4-T 4" TABLE TYPE HORIZONTAL BORING MILL, S/N 400-86-66; (No Table); (Plt 3-3) Col# G-8, [Located at PLANT 3]

297.01 WERTH TWIN SPINDLE VERTICAL BORING MACHINE, [Located at Warren, MI]

298 RANSOHOFF CONVEYORIZED THRU-FEED PARTS WASHER, S/N 3025; 24" Wide Stainless Steel Wire Mesh Belt; 12' Length; Single Stage; Ambient Temperature; Blow-Off; PLC; BT# 602247; With BT# 602242; Harry Major Automation Dual Lane Automated Thru-Feed Conveyor System; (Plt 3-6); Col# AA-19, [Located at PLANT 3]

299 RANSOHOFF CONVEYORIZED THRU-FEED PARTS WASHER, S/N 3026; (

- Page 18 -

1997); 24" Wide x 9" High Opening; Link Chain Conveyor; 12' Length; Single Stage; Ambient Temperature Blow-Off; PLC; BT# 602248; With BT# 105258 Harry Major Automation 24" Wide Power Roller Conveyor System; Auto Pallet Thru-Feed & Return Conveyor; Feed & Return End Pallet Lifts; (Plt 3-6); Col# AA-18, [Located at PLANT 3]

300 RANSOHOFF CONVEYORIZED THRU-FEED PARTS WASHER, S/N 3030; 40" Wide Link Chain Slat Conveyor; Single Stage; Ambient Temperature; 8" High Opening; 15' Length; BT# 602298; (Plt 3-5); Col# BB-14, [Located at PLANT 3]

301 ANDERSON COOK 340-S MARAND SPLINE ROLLER, S/N 462; (1997); Allen Bradley Data Liner PLC Control; 25-HP Remote Hydraulic Power Unit; 72" Overarm Outboard Support; 36" Tool Rack Length; BT# 601978; (Plt 3-5); Col# AA-15, [Located at PLANT 3]

302 TOCCO/FECO INDUCTION SHAFT HARDENING UNIT, Induction Model 400-3T-064; 400 Kw; 3 KHz Static Power Supply; S/N 20-1786-12D; Inductron II Microprocessor Controls; Vertical Twin Spindle Scanner Work Station; With Water Quench; GE Fanuc Power Mate Control; S/N 20-1786-22D; (Disconnected - Stored); BT# 606226; (Plt 3-3); Col# D-11, [Located at PLANT 3]

303 TOCCO/FECO INDUCTION SHAFT HARDENING UNIT, Induction Model 400-3T-064; 400 Kw; 3 KHz Static Power Supply; S/N 20-1786-12E; Inductron II Microprocessor Controls; Vertical Twin Spindle Scanner Work Station; With Water Quench; GE Fanuc Power Mate Control; S/N 20-1786-34E; (Disconnected - Stored); BT# 606227; (Plt 3-3); Col# D-12, [Located at PLANT 3]

304 TOCCO/FECO INDUCTION SHAFT HARDENING UNIT, Induction Model 400-3T-064; 400 Kw; 3 KHz Static Power Supply; S/N NA; Inductron II Microprocessor Controls; Vertical Twin Spindle Scanner Work Station; With Water Quench; GE Fanuc Power Mate Control; S/N NA; (Disconnected - Stored); BT# 606223; (Plt 3-3); Col# G-13, [Located at PLANT 3]

305 TOCCO/FECO INDUCTION SHAFT HARDENING UNIT, Induction Model 400-3T-064; 400 Kw; 3 KHz Static Power Supply; S/N 20-1786-12G; Inductron II Microprocessor Controls; Vertical Twin Spindle Scanner Work Station; With Water Quench; GE Fanuc Power Mate Control; S/N NA; (Disconnected - Stored); BT# 606229; (Plt 3-3); Col# G-13, [Located at PLANT 3]

306 SAGINAW MACHINE SYSTEMS CHALLENGER 120 SINGLE SPINDLE CNC VERTICAL TURNING MACHINE, S/N 7933-5/01 - H/551100; GE Fanuc Series 180i-T Control; (Disconnected; Stored); BT# 605574; (Plt 3); Col# D-10, [Located at PLANT 3]

- Page 19 -

306.01 SAGINAW MACHINE SYSTEMS ACCU CELL 300 TWIN SPINDLE CNC VERTICAL TURNING MACHINE, S/N 79337-5/01; GE Fanuc Series 180i-T Control; (Disconnected; Stored); BT# 605570; (Plt 3) Col# D-10, [Located at PLANT 3]

307 TOCCO THRU-FEED INDUCTION AXLE SHAFT TEMPERING MACHINE, S/N 20-1786-32; 24" Wide Link Chain Conveyor 25' Length; BT# 606231; (Plt 3-3); Col# G-9, [Located at PLANT 3]

308 TOCCO/FECO THRU-FEED SHAFT WASHER, S/N NA; BT# 60625; (Plt 3-3); Col# G-12 [Located at PLANT 3]

309 TOCCO/FECO THRU-FEED SHAFT WASHER, S/N NA; BT# 60624; (Plt 3-3); Col# G-12 [Located at PLANT 3]

310 EITEL ASP-25 AUTOMATIC SHAFT STRAIGHTENER, S/N 25783; Thru-Feed Walking Beam Transfer Conveyor; Xycom Programmable Controller; (Stored); BT# 601300; (Plt 3-3); Col# E-11, [Located at PLANT 3]

311 EITEL ASP-25 AUTOMATIC SHAFT STRAIGHTENER, S/N 25785; Thru-Feed Walking Beam Transfer Conveyor; Xycom Programmable Controller; (Stored); BT# 600078; (Plt 3-3); Col# E-11, [Located at PLANT 3]

312 MONROE ENVIRONMENTAL CENTRALIZED OIL MIST COLLECTOR, S/N 01-3734-1; BT# 605571; (Plt 3-3); Col# D-10, [Located at PLANT 3]

313 LIEBHERR OVERHEAD CNC GANTRY LOAD ROBOT, S/N 2.0.80 7163; (1997); 3-Axis Servo; Allen Bradley 9 Series Control With PanelView 550 Panel; Approx. 15' Linear Runway; Services BT# 601978 Anderson Cook Spline Roller; BT# 602202; (Plt 3-5); Col# AA-14 [Located at PLANT 3]

314 LIEBHERR OVERHEAD CNC GANTRY LOAD/UNLOAD ROBOT, S/N 2.0.80-7177; (1997); 3-Axis Servo Drive; Allen Bradley 9 Series Control; Approx. 45' Linear Runway; Electrical/Control Panel; BT# 602332; (Plt 3-6); Col# BB-18, [Located at PLANT 3]

315 WESTECH AUTOMATION MULTIPRESS SYSTEM BT# 104501, (D-13) [Located at PLANT 3]

316 1/R KINETIC BALANCE TECH FLANGE RUN OUT STATION, (STATION 12); (D-11) [Located at PLANT 3]

317 1/R KINETIC BALANCE TECH FLANGE RUN OUT STATION, (STATION 16); (D-11) [Located at PLANT 3]

318 MAYFRAN CHIP CONVEYOR, (D-10) [Located at PLANT 3]

319 LOT: ASSTD NACHI ROBOT CABLES, (D-11) [Located at PLANT 3]

320 MARPOSS GAGING STAND, (Stored); (No Controls); BT# 500496; (Plt 3-3); Col# E-10 [Located at PLANT 3]

321 MARPOSS GAGING STAND, (Stored); (No Controls); BT# MB03272; (Plt 3-3);

- Page 20 -

Col# E-10 [Located at PLANT 3]322 EXCELLO 3237 SPLINE ROLLER, S/N

400-058; 36" Overarm Outboard Support; Push Button Operators Panel; BT# 33658; (Plt 7-1) North Entrance Door [Located at PLANT 7 ]

323 EXCELLO 3237 SPLINE ROLLER, S/N 400-039; 36" Overarm Outboard Support; Push Button Operators Panel; BT# NA; (Plt 7-1) North Entrance Door [Located at PLANT 7 ]

324 PMC 12" X 16" CAPACITY HORIZONTAL METAL CUTTING BANDSAW, MODEL & S/N NA; Shuttle Conveyor Infeed; (Plt 7-3); Col# A-33, [Located at PLANT 7 ]

325 LANDIS TYPE 2R UNIVERSAL 10" X 36" UNIVERSAL OD/ID CYLINDRICAL GRINDER, S/N 856-94; Drop-Down Motorized ID Spindle; Motorized Workhead; Tailstock; (Plt 7-2); [Located at PLANT 7 ]

326 G & E GEAR CUTTER, (7-1) [Located at PLANT 7 ]

327 BROWN & SHARPE 12" X 24" HAND FEED SURFACE GRINDER, (7-1) S/N 523-1224-389 [Located at PLANT 7 ]

328 Qty (2) of # VALUE!, [Located at PLANT 7 ]

329 BRIDGEPORT E2 TRAK DX 2 H.P. VERTICAL MILLING MACHINE S/N BR 2751586, (7-2) [Located at PLANT 7 ]

330 HAMMOND 12" HEAVY-DUTY DOUBLE-END PEDESTAL GRINDER, S/N NA; (Plt 7-1), [Located at PLANT 7 ]

331 MARATHON V-6030HD VERTICAL HYDRAULIC BALER, S/N 308378; 60" x 30" Chamber; Top Mounted Hydraulics; BT# MB0404; (Plt 7-1); [Located at PLANT 7 ]

332 NACHI SH100-01 ROBOT, (A-32) [Located at PLANT 7 ]

333 NACHI SH100F-01 ROBOT, (A-32) [Located at PLANT 7 ]




337 NACHI SH100-01 ROBOT, (A-32) [Located at PLANT 7 ]


339 GLOBAL Qty (7) of LAMINATE WORK TABLES, (7-2) [Located at PLANT 7 ]

340 HARRY MAJOR MACHINE AUTOMATED PALLET OUTFEED CONVEYOR, 28" Wide Link Chain Conveyor; 12' Length; BT# 105369; (Plt 3-5); Col# BB-15, [Located at PLANT3]

341 EITEL RP25 C-FRAME HYDRAULIC STRAIGHTENING PRESS, S/N 25751; (1996); 60" Rolling Centers; 138" Table; BT# 601938; (Plt 5-8); Col# A-10 [Located at PLANT5]

342 CINCINNATI MILACRON EV130 VERTICAL CLAMP PLASTIC INJECTION MOLDING MACHINE, S/N

- Page 21 -

V07A0100015; Vertical Hydraulic Clamp; Horizontal Shot Injection; 59" Diameter Rotary Indexing Table; 30-HP Hydraulic Power Unit; Cincinnati Milacron Xtreem ST Microprocessor Controls; BT# 620662; (Plt 5); Col# A-12 [Located at PLANT5]

343 MATSUI PLAS-AID MJ3-500 PLASTICS MATERIAL DEHUMIDIFYING DRYER, S/N MJ3-0394A; (2006); Microprocessor Controls; Heaters; 3.2 Kw Regeneration/4.0 Kw Process; (Plt 5); Col# A-12 [Located at PLANT5]

344 LINDBERG TYPE 13-FCF-304830-12 ROLLER HEARTH ELECTRIC HEAT TREAT FURNACE, S/N 24716; 95 Kw; 1250 Degrees Fahrenheit Max. Temp.; 6' x 7' O.D.; (Plt 5); Col# A-15, [Located at PLANT5]

345 HORIZONTAL HYDRAULIC WHEEL PRESS, MFG'R NA; 6" Outboard Support Travel; Hydraulic Power Unit; (Plt 5); Col# G-1A, [Located at PLANT5]

346 THRU-FEED ABRASIVE SHOT BLAST CLEANING MACHINES, (1) BCP MODEL 7 S/N AN; (2) MFG'R NA; Tunnel Type; Thru-Feed Screw Auger Workpiece Conveyor; (3) 40--HP Top Shot Blast Wheels; Approx. 22' Length; Shot Reclaim System; Control Panel; Floor Standing; (Plt 4/Shot Blast), [Located at PLANT 4]



349 HY-VAC 240 CENTRAL VACUUM SYSTEM, S/N HV3662; 10-HP AC Roots Blower; Allen Bradley SLC 5/05 CPU PLC Control; Stand Mounted With Foam Insulated Noise Enclosure Panels; Self-Dumping Hopper; (Plt 5/Shot Blast), [Located at PLANT 4]

350 RUST PREVENTATIVE SPRAY APPLICATOR, RP Holding Tank With Pneumatic Pump; Thru-Feed Monorail Spray Applicator Booth; Donaldson Mfg. Torit Model MHP-1 Dust/Mist Collector; S/N IG792271; (Plt 4/Shot Blast) [Located at PLANT 4]

351 ZEISS CONTURA HTG BRIDGE TYPE COORDINATE MEASURING MACHINE, S/N 200204521196; Granite Table Size 40" x 53"; Joystick Panel; (Incomplete); (Plt 5); Col# E-22, [Located at

- Page 22 -

PLANT 5]352 MITUTOYO GEO-CHEK OPTICAL

COMPARATOR, (IN LAB) [Located at PLANT 5]

353 ELBO CONTROLLI PANAVISION R 3767 OPTICAL ROUNDNESS CHECKER, S/N 41081; With Programmable Control; (Plt 5); Col# C-7, [Located at PLANT 5]

354 UNITED TRU-BLUE II DIGITAL ROCKWELL HARDNESS TESTER, (Plt 5); Col. C-7, [Located at PLANT 5]

355 NEWAGE DIGITAL ROCKWELL HARDNESS TESTER, (Plt 5); Col. C-7, [Located at PLANT 5]

356 VERSITRON DIGITAL ROCKWELL HARDNESS TESTER, (Plt 5); Col. C-7, [Located at PLANT 5]

357 VERSITRON DIGITAL ROCKWELL HARDNESS TESTER, (Plt 5); Col. C-7, [Located at PLANT 5]

358 LOUIS SMALL SERVICE PHYSICAL T-18-10 BRIINNEL HARDNESS TESTER, S/N 5021; (Plt 5); Col# C-7 [Located at PLANT 5]

359 ROMER ARTICULATING MEASURING ARM, Mounted on 48" x 84" x 14" Granite Surface Plate; (Plt 5); Col# A-10 [Located at PLANT 5]

360 STARRETT 24" X 24" X 6" PINK GRANITE SURFACE PLATE, (A-9) [Located at PLANT 5]

361 COLLINS MICRO-FLAT 24" X 24" X 4" BLACK GRANITE SURFACE PLATE, (A-10) [Located at PLANT 5]

362 STARRETT 36" X 24" X 6" PINK GRANITE SURFACE PLATE, (E-21) [Located at PLANT 5]

363 AIR CONDITIONER, (E-21) [Located at PLANT 5]

363.01 KOHLER 20 KW Backup Generator, Power System - Fast Response; Yr 2005; Natural Gas Type; Kohler Power System Transfer Switch [Located at South Haven, MI]

364 7 DRAWER TOOL CABINET, (E-26) [Located at PLANT 5]









373 10 DRAWER TOOL CABINET, (A-28) [Located at PLANT 5]



- Page 23 -


377 LISTA 7 DRAWER TOOL CABINET, (D-29) [Located at PLANT 5]

378 LISTA 14 DRAWER WORK BENCH, (D-27) [Located at PLANT 5]



381 LISTA 8 DRAWER WORK BENCH, (AA-24) [Located at PLANT 5]

382 LISTA 8 DRAWER WORK BENCH, (AA-24) [Located at PLANT 5]

383 STANLEY VIDMAR 8 DRAWER WORK BENCH, (A-22) [Located at PLANT 5]

384 6 DRAWER WORK BENCH, (E-26) [Located at PLANT 5]










394 BROWN & SHARPE 12" HITE-ICATOR W/10" RISER, (M-36) [Located at PLANT 2]

395 BROWN & SHARPE 10" HITE-ICATOR W/10" RISER, (M-36) [Located at PLANT 2]

396 MITUTOYO 12" HEIGHT MASTER, (M-36) [Located at PLANT 2]

397 LOT: (4) ASSTD VERNIER HEIGHT GAGES, (M-36) [Located at PLANT 2]

398 LOT: (4) ASSTD VERNIER CALIPERS, (M-36) [Located at PLANT 2]

399 STARRETT 12 PC MICROMETER SET, (M-36) [Located at PLANT 2]

400 MICROMETER SET 10 PC, (M-36) [Located at PLANT 2]

401 LOT: ASSTD MICROMETERS, (M-36) [Located at PLANT 2]

402 LOT: (4) ASSTD SQUARES, (M-36) [Located at PLANT 2]

403 Qty (2) of METRIC GAGE BLOCK SETS, (M-35) [Located at PLANT 2]

404 A.A. JANSSON Qty (3) of GAGE BLOCK SETS, (M-35) [Located at PLANT 2]

405 WEBBER Qty (2) of GAGE BLOCK SETS, (M-35) [Located at PLANT 2]

406 LOT: ASSTD GAGE BLOCK SETS, (N-34) [Located at PLANT 2]

407 LOT: ASSTD INTERNAL TRI POINT MICROMETERS, (N-34) [Located at PLANT 2]

- Page 24 -

408 LOT: ASSTD STANDARDS, (N-34) [Located at PLANT 2]

409 LOT: ASSTD MAGNETIC V-BLOCKS, (N-34) [Located at PLANT 2]

410 LOT: ASSTD MAGNETIC PARALLELS, (N-34) [Located at PLANT 2]

411 LOT: ASSTD V-BLOCKS, (N-34) [Located at PLANT 2]

412 Open 413 Open 414 BLANCHETTE TEST UNIT, (M-36) [

Located at PLANT 2]

415 SIGMATIC TEST UNIT, (M-36) [Located at PLANT 2]

416 ROCK OF AGES 6' X 3' SURFACE PLATE, (M-33) [Located at PLANT 2]

417 6' X 4' SURFACE PLATE, (M-36) [Located at PLANT 2]

418 CHALLENGE 36" X 24" SURFACE PLATE, (M-33) [Located at PLANT 2]

419 24" X 18" SURFACE PLATE, (N-36) [Located at PLANT 2]


421 STARRETT 24" X 18" SURFACE PLATE, (M-36) [Located at PLANT 2]


423 LOT: (5) ASSTD MICROMETERS, (M-36) [Located at PLANT 2]

424 SUBURBAN WHIRLIE-GIG, (N-36) [Located at PLANT 2]

425 SUBURBAN WHIRLIE-GIG, (N-36) [Located at PLANT 2]

426 HARIG GRIND-ALL NO 2 GRINDING FIXTURE, (N-36) [Located at PLANT 2]

427 HARIG GRIND-ALL NO 2 GRINDING FIXTURE, (N-36) [Located at PLANT 2]

428 ROBBINS 11" X 6" ,AGNA-SINE CHUCK, (N-36) [Located at PLANT 2]

429 EXCELLO 6 1/2" X 6 1/2" SINE CHUCK, (N-36) [Located at PLANT 2]

430 BROWN & SHARPE 6" X 6" PERMA SINE CHUCK, (N-36) [Located at PLANT 2]

431 6" X 6" SINE CHUCK, (N-36) [Located at PLANT 2]



434 Qty (2) of MAGNETIC BLOCKS, (N-36) [Located at PLANT 2]

435 VINCO DIAMOND WHEEL DRESSER, (N-36) [Located at PLANT 2]

436 ECON-O ACCRO DRISSER, (N-36) [Located at PLANT 2]

437 LAST WORD DIAMOND WHEEL DRESSER, (N-36) [Located at PLANT 2]



440 YUASA DIAMOND WHEEL DRESSER, (N-36) [Located at PLANT 2]

441 Qty (2) of DIAMOND WHEEL DRESSERS, (N-36) [Located at PLANT 2]

442 LOT: ASSTD DIAMOND WHEEL DRESSERS, (1 BOX); (N-36) [Located at

- Page 25 -

PLANT 2]443 NORTON Qty (2) of TRUING DEVICES,

(N-36) [Located at PLANT 2]

444 10" X 6" X 12" SINE ANGLE PLATE, (M-36) [Located at PLANT 2]

445 LOT: FLEX COLLET CHUCK W/COLLETS, (M-36) [Located at PLANT 2]

446 ALORIS C TOOL POST SET 13 PIECE, [Located at PLANT 2]

447 KURT II 8" MACHINE VISE, (M-34) [Located at PLANT 2]

448 KURT 8" MACHINE VISE, (M-34) [Located at PLANT 2]

449 8" MACHINE VISE, (M-34) [Located at PLANT 2]


451 KURT 6" MACHINE VISE, (M-34) [Located at PLANT 2]


453 12" X 6" SINE PLATE, (M-34) [Located at PLANT 2]

454 LOT: (3) ASSTD BORING HEADS, (M-34) [Located at PLANT 2]

455 Qty (2) of V-BLOCKS, (M-34) [Located at PLANT 2]

456 DEVLIEG Qty (2) of 30" H X 16" W X 16" D ANGLE PLATES, (M-33) [Located at PLANT 2]

457 LOT: ASSTD ANGLE PLATES 9M-34), [Located at PLANT 2]

458 CAT 50 Qty (39) of TOOL HOLDERS W/CART, (M-34) [Located at PLANT 2]

459 Qty (47) of 40 TAPER TOOL HOLDERS W/CART, (M-34) [Located at PLANT 2]

460 Qty (56) of 40 TAPER TOOL HOLDERS W/CART, (M-35) [Located at PLANT 2]

461 CAT 50 TAPER TOOL HOLDERS, (M-33) [Located at PLANT 2]

462 CAT 50 RENSHAW HEAD, (M-33) [Located at PLANT 2]

463 LOT: ASSTD INSERT TOOL HOLDERS, ( BOX0; (M-33) [Located at PLANT 2]

464 LOT: ASSTD INSERT MILLING CUTTERS, (1 BOX); (M-33) [Located at PLANT 2]

465 LOT: ASSTD CARBIDE END MILLS, (IN 2 BOXES); (M-33) [Located at PLANT 2]

466 LOT: ASSTD CUTTING TOOLS, (IN BOXES); (M-33) [Located at PLANT 2]

467 LOT: ASSTD END MILLS, (IN 3 BOXES); (M-33) [Located at PLANT 2]








475 LOT: ASSTD TAPS, (IN 2 BOXES); (M-

- Page 26 -

33) [Located at PLANT 2]476 LOT: ASSTD REAMERS, (IN 2 BOXES)

; (M-33) [Located at PLANT 2]

477 LOT: ASSTD CUTTING TOOLS, (IN 2 BOXES); (M-33) [Located at PLANT 2]

478 LOT: ASSTD MILLING CUTTERS, (IN 4 BOXES); (M-33) [Located at PLANT 2]

479 LOT: ASSTD BORING BARS, (M-33) [Located at PLANT 2]

480 LOT: SPRING COLLETS, (IN 2 BOXES); (M-33) [Located at PLANT 2]

481 LOT: ASSTD T.S. DRILLS, (IN 4 BOXES); (N-36) [Located at PLANT 2]

482 LOT: ASSTD T.S. DRILLS, (IN 5 BOXES); (N-36) [Located at PLANT 2]

483 LOT: ASSTD DRILLS, (IN 4 BOXES); (N-36) [Located at PLANT 2]

484 LOT: ASSTD DRILLS, (IN 6 BOXES); (N-36) [Located at PLANT 2]

485 LOT: ASSTD INSERT TOOL HOLDERS, (1 BOX); (M-33) [Located at PLANT 2]

486 LOT: ASSTD CARBIDE INSERTS, (1 BOX); (M-33) [Located at PLANT 2]



489 LOT: ASSTD CARBIDE INSERTS, (2 BOXES); (M-33) [Located at PLANT 2]

490 LOT: ASSTD CARBIDE INSERTS, (2 BOXES); (M-33) [Located at PLANT 2]



493 LOT: ASSTD CERAMIC INSERTS, (IN 1 BOX); (M-33) [Located at PLANT 2]

494 LOT: ASSTD CARBIDE INSERTS, (IN 2 BOXES); (N-32) [Located at PLANT 2]

495 LOT: ASSTD CARBIDE INSERTS, (IN 3 BOXES); (N-32) [Located at PLANT 2]

496 14 DRAWER TOOL CABINET, (M-35) [Located at PLANT 2]



499 NUU-ERR 8 DRAWER TOOL CABINET, (M-34) [Located at PLANT 2]



502 10 DRAWER TOOL CABINET, (N-35) [Located at PLANT 2]

503 7 DRAWER TOOL CABINET, (N-35) [Located at PLANT 2]

504 LISTA 7 DRAWER TOOL CABINET, (N-32) [Located at PLANT 2]

505 LISTA 7 DRAWER TOOL CABINET, (N-32) [Located at PLANT 2]

506 LISTA 12 DRAWER WORK BENCH, (N-32) [Located at PLANT 2]


508 LISTA 6 DRAWER WORK BENCH, (M-33) [Located at PLANT 2]

509 6 DRAWER WORK BENCH, (M-33) [Located at PLANT 2]

- Page 27 -











520 STRONG HOLD 2 DOOR CABINET, (N-35) [Located at PLANT 2]

521 STRONG HOLD 2 DOOR CABINET, (O-33) [Located at PLANT 2]

522 STRONG HOLD 2 DOOR CABINET, (O-33) [Located at PLANT 2]


524 2 DOOR CABINET, (N-32) [Located at PLANT 2]

525 STRONG HOLD 2 DOOR CABINET, (M-32) [Located at PLANT 2]













538 2 DOOR CABINET, (N-36) [Located at PLANT 2]

539 LOT: ASSTD STEEL W/RACK, (M-32) [Located at PLANT 2]



542 LOT: (2) CABINETS AND 1 RACK W/CONTENTS, (M-31) [Located at PLANT 2]

543 NU-ERA 9 DRAWER TOOL CABINET AND 2 DOOR CABINET, (H-25) [

- Page 28 -

Located at PLANT 4]544 NU-ERA 13 DRAWER TOOL CABINET

AND 2 DOOR CABINET, (H-25) [Located at PLANT 4]

545 NU-ERA 9 DRAWER TOOL CABINET AND 2 DOOR CABINET, (H-25) [Located at PLANT 4]





















566 NU-ERA 11 DRAWER TOOL CABINET AND 2 DOOR CABINET, (H-25) [

- Page 29 -

Located at PLANT 4]567 NU-ERA 11 DRAWER TOOL CABINET

AND 2 DOOR CABINET, (H-25) [Located at PLANT 4]

















584 NU-ERA Qty (4) of 2 DOOR SUPPLY CABINETS, (H-25) [Located at PLANT 4]



587 STRONG HOLD Qty (4) of 2 DOOR SUPPLY CABINETS, (H-28) [Located at PLANT 4]



590 STRONG HOLD Qty (4) of 2 DOOR SUPPLY CABINETS, (H-28) [Located at

- Page 30 -

PLANT 4]591 STRONG HOLD Qty (3) of 2 DOOR

SUPPLY CABINETS, (H-28) [Located at PLANT 4]

592 LOT: (4) ASSTD 2 DOOR CABINETS, [Located at PLANT 4]







599 STRONG HOLD FLAMMABLE STORAGE CABINET, [Located at PLANT 4]







606 STRONG HOLD CABINET, (F-4) [Located at PLANT 8]


608 LOT: (3) ASSTD STRONG HOLD CABINETS, (F-6) [Located at PLANT 8]

609 Qty (2) of STRONG HOLD CABINETS, (F-6) [Located at PLANT 8]

610 STRONG HOLD 6 DOOR CABINET, (F-7) [Located at PLANT 8]

611 LOT: LOCKERS, (F-5) [Located at PLANT 8]

612 LOT: ASSTD ABRASIVES, (1 SKID) (H-10) [Located at PLANT 4]

613 ENERPAC LOT: ENERPAC UNITS, ETC (1 SKID) (H-10), [Located at PLANT 4]

614 LOT: ASSTD HAMMERS (1 SKID), [Located at PLANT 4]

615 LOT: SOCKETS, WHEEL PULLERS, (1SKID) (H-10) [Located at PLANT 4]

616 LOT: C-CLAMPS, HOIST, BEARINGS, (1 SKID) (H-10) [Located at PLANT 4]

617 LOT: AIR TOOLS, TOOLS, (1 SKID) (H-10) [Located at PLANT 4]

618 LOT: MISCELLANEOUS (1 SKID) (H-10), [Located at PLANT 4]

619 LOT: ASSTD ENERPAC UNITS, (1 SKID) (H-10) [Located at PLANT 4]

620 LOT: ASSTD LIGHT BULBS, (1 SKID) ( H-10) [Located at PLANT 4]

621 LOT: ASSTD FILTERS (1 SKID) (H-9), [Located at PLANT 4]

622 LOT: ASSTD TOOLS (1 SKID) (H-9), [Located at PLANT 4]

623 LOT: ASSTD SOCKETS (1 SKID) (H-10)

- Page 31 -

, [Located at PLANT 4]624 LOT: ASSTD TOOLS (1 SKID) (H-10), [

Located at PLANT 4]

625 LOT: ASSTD SOCKETS, ETC (1 SKID) (H-10), [Located at PLANT 4]

626 LOT: ASSTD ENERPAC UNITS, ETC, (1 SKID) (H-10) [Located at PLANT 4]

627 LOT: ASSTD SOCKETS (1 SKID) (H-10), [Located at PLANT 4]


629 LOT: ASSTD ENERPAC UNITS, ETC, (1 SKID) (H-9) [Located at PLANT 4]

630 LOT: ASSTD ENERPAC JACKS, (1 SKID) (H-9) [Located at PLANT 4]


632 LOT: ASSTD ENERPAC JACKS, (1 SKID) (H-10) [Located at PLANT 4]



635 LOT: ASSTD REPAIR PARTS, (1 SKID) (F-7) [Located at PLANT 4]

636 LOT: BEARINGS, GEARS, (1 SKID) (F-7) [Located at PLANT 4]

637 LOT: ASSTD BEARINGS, (1 SKID) (F-7) [Located at PLANT 4]

638 LOT: ASSTD OIL SEALS, (1 SKID) (F-7) [Located at PLANT 4]



641 LOT: ASSTD HYDRAULIC VALVES, (1 SKID) (F-8) [Located at PLANT 4]

642 LOT: ASSTD HYDRAULIC VALVES, (1 SKID) (F-8) [Located at PLANT 4]

643 LOT: ASSTD HYDRAULIC VALVES, ETC, (1 SKID) (F-8) [Located at PLANT 4]

644 LOT: ASSTD ELECTRICAL (1 SKID) (F-8), [Located at PLANT 4]












656 LOT: ASSTD CIRCUIT BOARDS, (1 SKID) (F-8) [Located at PLANT 4]

657 LOT: ASSTD ELECTRICAL (1 SKID) (F

- Page 32 -

-8), [Located at PLANT 4]658 LOT: ASSTD PILLOW BLOCKS, (1

SKID) (F-8) [Located at PLANT 4]

659 LOT: ASSTD PILLOW BLOCKS, (1 SKID) (F-9) [Located at PLANT 4]

660 LOT: ASSTD REPAIR PARTS, (4 BOXES) (F-9) [Located at PLANT 4]


662 LOT: ASSTD ELECTRICAL (1 SKID) (D-10), [Located at PLANT 4]

663 LOT: ASSTD BEARINGS, (1 SKID) (D-10) [Located at PLANT 4]





668 LOT: ASSTD REPAIR PARTS, (1 SKID) (M-5) [Located at PLANT 2]

669 LOT: ASSTD TOOLS (1 SKID) (M-5), [Located at PLANT 2]

670 LOT: ASSTD TOOLS (1 SKID) (M-5), [Located at PLANT 2]

671 LOT: ASSTD REPAIR KITS, (1 SKID) (M-5) [Located at PLANT 2]

672 LOT: CHAINS, ETC (1 SKID) (L-5), [Located at PLANT 2]

673 LOT: MISCELLANEOUS (1 SKID) (L-5), [Located at PLANT 2]

674 LOT: MULTI SPINDLE DRILL HEADS, (L-5) [Located at PLANT 2]

675 LOT: ASSTD FITTINGS (1 SKID) (L-5), [Located at PLANT 2]

676 ENERPAC LOT: HYDRAULIC UNITS (1 SKID) (L-5), [Located at PLANT 2]

677 LOT: ASSTD BROACHES (1 SKID) (L-5), [Located at PLANT 2]

678 LOT: ASSTD TOOLS (1 SKID) (L-5), [Located at PLANT 2]

679 LOT: ASSTD TOOLING (1 SKID) (L-5), [Located at PLANT 2]

680 LOT: ASSTD REPAIR PARTS, (1 SKID) (L-5) [Located at PLANT 2]

681 LOT: ASSTD CYLINDERS (1 SKID) (L-5), [Located at PLANT 2]

682 LOT: ASSTD CYLINDERS (1 SKID) (L-5), [Located at PLANT 2]



685 LOT: CHAIN HOISTS (1 SKID) (L-5), [Located at PLANT 2]





690 LOT: ASSTD WHEEL PULLERS, (1 SKID) (L-6) [Located at PLANT 2]


- Page 33 -




695 LOT: ASSTD BEARINGS, GEARS, (1 SKID (L-6) [Located at PLANT 2]



698 LOT: ASSTD HILTI ANCHORS, GUNS, (1SKID) (L-6) [Located at PLANT 2]

699 LOT: ASSTD ELECTRICAL CORDS, ETC, (1 SKID) (L-6) [Located at PLANT 2]

700 LOT: ASSTD ELECTRICAL (1 SKID) (L-6), [Located at PLANT 2]



703 LOT: ASSTD SLINGS, C-CLAMPS, (1 SKID) (L-6) [Located at PLANT 2]

704 LOT: HOISTS (1 SKID) (L-6), [Located at PLANT 2]

705 LOT: ASSTD V-BELTS (1 SKID) (L-6), [Located at PLANT 2]

706 LOT: ASSTD BEARINGS (1 SKID) (L-6), [Located at PLANT 2]


708 LOT: ASSTD TOOLING (1 SKID) (L-6), [Located at PLANT 2]

709 LOT: ASSTD GEARS (1 BOX) (L-6), [Located at PLANT 2]

710 LOT: LIGHT COVERS (1 SKID) (L-6), [Located at PLANT 2]

711 LOT: ASSTD MOTORS, ETC (1 SKID) (L-6), [Located at PLANT 2]



714 LOT: ASSTD WELDING SUPPLIES, (1 SKID) (L-6) [Located at PLANT 2]

715 LOT: ELECTRIC DRILL UNIT, (L-6) [Located at PLANT 2]

716 LOT: ELECTRIC DRILL UNIT, (L-6) [Located at PLANT 2]

717 LOT: KNAACK GANG BOX (L-6), [Located at PLANT 2]

718 LOT: HOSE REELS (1 SKID) (L-6), [Located at PLANT 2]

719 LOT: HOSE REELS (1 SKID) (L-6), [Located at PLANT 2]

720 LOT: LIGHT COVERS (1 SKID) (L-6), [Located at PLANT 2]

721 LOT: ASSTD TOOLS (1 SKID) (C-10), [Located at PLANT 8]





- Page 34 -


727 VENTAMAT FAN (C-10), [Located at PLANT 8]

728 20 H.P. AC MOTOR (C-10), [Located at PLANT 8]

729 LOT: ASSTD CYLINDERS, (1 SKID) (C-10) [Located at PLANT 8]

730 LOT: ASSTD REPAIR PARTS, (1 SKID) (C-11) [Located at PLANT 8]

731 LOT: ASSTD HYDRAULIC PUMPS, (1 SKID) (C-11) [Located at PLANT 8]

732 LOT: HOSE REELS, ETC, (2 SKIDS) (C-10) [Located at PLANT 8]

733 LOT: ASSTD BEARINGS, (1 SKID) (C-11) [Located at PLANT 8]

734 LOT: ASSTD BROACHES, ETC, (1 SKID) (C-11) [Located at PLANT 8]


736 LOT: ASSTD GEARS (1 SKID) (C-11), [Located at PLANT 8]




740 LOT: ASSTD C-CLAMPS, (1 SKID) (C-11) [Located at PLANT 8]

741 LOT: ASSTD BEARINGS, ETC, (1 SKID) (C-11) [Located at PLANT 8]





746 LOT: WELDING ROD AND GAUGES (1 SKID) (C-10), [Located at PLANT 8]

747 FEDERAL PACIFIC 15 KVA TRANSFORMER (C-10), [Located at PLANT 8]

748 LOT: V-BELTS, GEARS, (1 SKID) (C-11) [Located at PLANT 8]

749 LOT: ASSTD SCREWS (1 SKID) (C-11), [Located at PLANT 8]

750 LOT: MISCELLANEOUS (1SKID) (C-12), [Located at PLANT 8]

751 LOT: ASSTD HYDRAULIC UNITS, (1 SKID) (C-12) [Located at PLANT 8]



754 LOT: ASSTD BEARINGS (1 SKID) (C-12), [Located at PLANT 8]





759 LOT: ASSTD SCREWS WITH RACK, (C-11) [Located at PLANT 8]

- Page 35 -

760 LOT: MISCELLANEOUS (1 SKID) (C-11), [Located at PLANT 8]

761 LOT: ASSTD CYLINDERS, (1 SKID) (C-12) [Located at PLANT 8]


763 LOT: ASSTD PUMPS, ETC, (1 SKID) (C-12) [Located at PLANT 8]

764 LOT: HEAT SAFETY SUITES, (1 SKID) (C-12) [Located at PLANT 8]


766 LOT: ASSTD ELECTRICAL CORDS, (1 SKID) (C-12) [Located at PLANT 8]

767 LOT: ASSTD TOOLS, (1 SKID) (C-12) [Located at PLANT 8]

768 LOT: ASSTD PRY BARS, (1 SKID) (C-13) [Located at PLANT 8]


770 STRONG HOLD Qty (5) of CABINETS (C-9), [Located at PLANT 8]

771 STRONG HOLD Qty (3) of CABINETS (E-8), [Located at PLANT 8]

772 LOT: (5) ASSTD CABINETS (D-9), [Located at PLANT 8]

773 EQUIPTO 6-DRAWER TOOL CABINET (D-9), [Located at PLANT 8]

774 MAPLE TOP WORK BENCH (D-9), [Located at PLANT 8]

775 DAYTON PEDESTAL GRINDER, 7" DOUBLE END (D-9) [Located at PLANT 8]

776 PALLET RACKING, 1 SECTION (E-8) [Located at PLANT 8]

777 STEEL WORK TABLE (E-8), [Located at PLANT 8]

778 OIL GEAR HYDRAULIC PRESS, (E-7) [Located at PLANT 8]

779 LOT: ASSTD REPAIR PARTS, (7 SKIDS) (C-11) [Located at PLANT 8]

780 LOT: ASSTD ALUMINUM PARTS, (3 SKIDS) (C-11) [Located at PLANT 8]

END OF DAY 1

START OF DAY 2

1001 TOLEDO PORTABLE PLATFORM SCALE, (E-27) [Located at PLANT 5]

1002 HOBART GAS POWERED 8500 WATT MULTI-PROCESS WELDING POWER SUPPLY, (A-2) [Located at PLANT 5]

1003 HOBART GAS POWERED 8500 WATT MULTI-PROCESS WELDING POWER SUPPLY, (A-2) [Located at PLANT 5]

1004 LINCOLN ARC WELDER, (A-2) [Located at PLANT 5]

1005 LINCOLN ARC WELDER, (A-2) [Located at PLANT 5]

1006 GAS POWERED STEAM CLEANER, (A-3) [Located at PLANT 5]

1007 LOT: (2) ASSTD PNEUMATIC PUMPS W/CART, (A-3) [Located at PLANT 5]

1008 Qty (4) of JACK STANDS, [Located at PLANT 5]

1009 LOT: (2) 2 ASSTD PNEUMATIC PUMPS W/CART, (A-3) [Located at PLANT 5]

1010 Qty (2) of SCISSOR LIFT CARTS, (E-8) [

- Page 36 -

Located at PLANT 5]1011 Qty (4) of 2 WHEEL HAND TRUCKS, (E

-8) [Located at PLANT 5]

1012 LOT: ASSTD SHOP CARTS, (C-8) [Located at PLANT 5]

1013 12 DRAWER TOOL CABINET, (G-9) [Located at PLANT 5]






1019 LISTA 7 DRAWER TOOL CABINET, (G-9) [Located at PLANT 5]


1021 12 DRAWER TOOL CABINET, (F-9) [Located at PLANT 5]

















1038 LISTA 7 DRAWER TOOL CABINET, (F-9) [Located at PLANT 5]



1041 LISTA TOOL CABINETS, (F-8) [Located at PLANT 5]




- Page 37 -














1058 LOT: (3) ASSTD CABINETS, (F-10) [Located at PLANT 5]

1059 STANLEY VIDMAR Qty (9) of TOOL CABINETS, (G-10) [Located at PLANT 5]

1060 LOT: (7) FILE CABINETS AND 2 DESKS, (G-8) [Located at PLANT 5]

1061 2 DOOR SUPPLY CABINET, (G-9) [Located at PLANT 5]

1062 2 DOOR H.D. CABINET, (G-9) [Located at PLANT 5]

1063 2 DOOR H.D. CABINET, (F-9) [Located at PLANT 5]

1064 LISTA CABINET, (F-9) [Located at PLANT 5]

1065 STEEL MESH CABINET, (F-8) [Located at PLANT 5]



1068 LISTA 8 DRAWER TOOL CABINET, (C-12) [Located at PLANT 5]

1069 10 DRAWER TOOL CABINET, (C-12) [Located at PLANT 5]


1071 LISTA Qty (2) of 6 DRAWER TOOL CABINETS, (E-23) [Located at PLANT 5]

1072 LISTA 5 DRAWER TOOL STORAGE CABINET, (E-20) [Located at PLANT 5]

1073 LISTA Qty (2) of 4 DRAWER TOOL CABINETS, (E-15) [Located at PLANT 5]

1074 5 DRAWER TOOL STORAGE CABINET, (E-14) [Located at PLANT 5]




1078 LISTA 8 DRAWER WORK BENCH, (E-15) [Located at PLANT 5]

1079 4 DRAWER WORK BENCH, (E-15) [

- Page 38 -

Located at PLANT 5]1080 MAPLE TOP WORK BENCH, (E15) [

Located at PLANT 5]

1081 LISTA 12 DRAWER WORK BENCH, (C-18) [Located at PLANT 5]


1083 8 DRAWER WORK BENCH, (AA-17) [Located at PLANT 5]


1085 Qty (2) of 6 DRAWER TOOL CABINETS, (E-12) [Located at PLANT 5]

1086 LYON 11 DRAWER TOOL CABINETS, (F-3) [Located at PLANT 5]





1091 STRONG HOLD CABINET, (H-21) [Located at PLANT 5]






1097 STRONG HOLD Qty (4) of CABINETS, (F-8) [Located at PLANT 5]

1098 STRONG HOLD Qty (4) of CABINETS, (F-9) [Located at PLANT 5]


1100 LOT: (4) ASSTD CABINETS, (C-11) [Located at PLANT 5]







1107 Qty (3) of KNACK CABINETS, (A-14) [Located at PLANT 5]

1108 STRONG HOLD CABINET, (AA-17) [Located at PLANT 5]

1109 LOT: (2) ASSTD CABINETS, (AA-18) [Located at PLANT 5]

1110 LOT: (5) ASSTD CABINETS, (AA-22) [Located at PLANT 5]

1111 LOT: (4) ASSTD CABINETS, (E-12) [Located at PLANT 5]

1112 LOT: (3) ASSTD CABINETS, (A-29) [Located at PLANT 5]

1113 STRONG HOLD Qty (3) of CABINETS, (A-29) [Located at PLANT 5]

- Page 39 -







1120 STRONG HOLD Qty (3) of CABINETS , (A-29) [Located at PLANT 5]

1121 LOT: ASSTD CABINETS, (A-28) [Located at PLANT 5]

1122 Qty (3) of 12 DOOR LOCKER CABINETS, (A-28) [Located at PLANT 5]

1123 11 DRAWER TOOL CABINETS, (A-29) [Located at PLANT 5]

1124 LYON 2 DOOR SUPPLY CABINET, (A-29) [Located at PLANT 5]


1126 LYON 2 DOOR SUPPLY CABINET, (A-29) [Located at PLANT 5]

1127 Qty (2) of LAB BENCH, (E-17) [Located at PLANT 5]

1128 LOT: CONTENTS OF ROOM, (E-24) [Located at PLANT 5]

1129 LOT: CONTENTS OF ROOM, (E-23) [Located at PLANT 5]

1130 LAB BENCH, (E-17) [Located at PLANT 5]

1131 STEEL WORK BENCH, (AA-18) [Located at PLANT 5]

1132 STEEL TABLE, (A-22) [Located at PLANT 5]

1133 DUAL SIDED AIR FLOW BENCH, (C-8) [Located at PLANT 5]

1134 AIR FLOW BENCH, [Located at PLANT 5]

1135 AIR FLOW BENCH, [Located at PLANT 5]

1136 LOT: (2) ASSTD CAST IRON SURFACE PLATES, (AA-25) [Located at PLANT 5]

1137 CLARAGE BLOWER, (A-14) [Located at PLANT 5]

1138 LOT: (3) ASSTD ASSEMBLY FIXTURES, (A-11) [Located at PLANT 5]

1139 LOT: (3) ASSTD FIXTURES, (A-9) [Located at PLANT 5]

1140 AIR FLOAT PNEUMATIC LIFT TABLE, (C-9) [Located at PLANT 5]

1141 LOT: PNEUMATIC PUMPS, (3 SKIDS); (A-5) [Located at PLANT 5]

1142 LOT: CIRCUIT BREAKERS, (2 SKIDS); (A-5) [Located at PLANT 5]

1143 LOT: STEEL CONVEYOR AND STEEL HOOKS, (4 SKIDS); (A-5) [Located at PLANT 5]

1144 LOT: ASSTD FILTERS, ETC; (1 BOX); (A-5) [Located at PLANT 5]

1145 LOT: ASSTD MAINTENANCE SUPPLIES, (1 BOX); (A-5) [Located at PLANT 5]

1146 LOT: ASSTD MAINTENANCE SUPPLIES, (1 BOX); (A-5) [Located at PLANT 5]

- Page 40 -

1147 LOT: HOIST, FAN GUARDS; ETC; (1 BOX); (A-5) [Located at PLANT 5]

1148 LOT: LIGHT FIXTURES, (1 BOX); (A-5) [Located at PLANT 5]

1149 LOT: ASSTD ELECTRICAL, (1 BOX); (A-5) [Located at PLANT 5]




1153 LOT: MONITORS, PRINTERS; ETC; (4 BOXES); (A-3) [Located at PLANT 5]

1154 LOT: BRICKS, (1 BASKET); (C-2) [Located at PLANT 5]




1158 LOT: BRICKS, (1 BOX) [Located at PLANT 5]

1159 LOT: FIBREX BLOCK INSULATION, (1 SKID); (C-4) [Located at PLANT 5]

1160 LOT: CERAMIC FIBER, (1 SKID); (C-4) [Located at PLANT 5]

1161 LOT: CERAMIC FIBER, (1 SKID); (C-4) [Located at PLANT 5]

1162 LOT: FIBREX BLOCK INSULATION, (1 SKID); (C-5) [Located at PLANT 5]

1163 LOT: FIREBRICK, (1 SKID); (C-5) [Located at PLANT 5]

1164 1-TON 360 DEGREE FLOOR MOUNTED JIB CRANE, CM Lodestor 1-Ton Electric Chain Hoist; (Plt 5); Col# A-19, [Located at PLANT 5]

1165 1-TON CAPACITY 360 DEGREE FLOOR MOUNTED JIB CRANE, Yale 1-Ton Pneumatic Chain Hoist; (Plt 5); Col# F-2, [Located at PLANT 5]

1166 DAVID ROUND & SON 1-TON COLUMN MOUNTED JIB CRANE, With Yale Challenger 1-Ton Cable Hoist; (Plt 5); Col# A-19, [Located at PLANT 5]

1167 FLOOR MOUNTED JIB CRANE W/ 1/4-TON HOIST, (A-19) [Located at PLANT 5]

1168 MOTREC 4-WHEEL ELECTRIC MAINTENANCE CART, With Lincoln Ranger 8 Gas Powered Welder/Generator; Torch Well & Hose Reel [Located at PLANT 5]

1169 TAYLOR DUNN 4-WHEEL ELECTRIC MAINTENANCE CART, With Lincoln Ranger 8 Gas Powered Welder/Generator; Torch Well & Hose Reel; BT# 17389, [Located at PLANT 5]

1170 TAYLOR DUNN 4-WHEEL ELECTRIC MAINTENANCE CART, With Miller Trailblazer 251 CC-CV AC/DC Gas Powered Welder/Generator; Torch Well & Hose Reel, [Located at PLANT 5]

1171 TAYLOR DUNN 4-WHEEL ELECTRIC MAINTENANCE CART, With Miller Trailblazer 251 CC-CV AC/DC Gas Powered Welder/Generator; Torch Well & Hose Reel, [Located at PLANT 5]

- Page 41 -

1172 MOTREC 4-WHEEL ELECTRIC MAINTENANCE CART, With Lincoln Ranger 8 Gas Powered Welder/Generator; Torch Well & Hose Reel [Located at PLANT 5]

1173 CUSHMAN ENCLOSED ELECTRIC PERSONNEL CART, (D-5) [Located at PLANT 5]

1174 TAYLOR DUNN ENCLOSED ELECTRIC PERSONNEL CART, (D-5) [Located at PLANT 5]

1175 TAYLOR DUNN ENCLOSED ELECTRIC PERSONNEL CART, (D-5) [Located at PLANT 5]

1176 TAYLOR DUNN ENCLOSED ELECTRIC PERSONNEL CART, (C-5) [Located at PLANT 5]

1177 TAYLOR DUNN ENCLOSED ELECTRIC PERSONNEL CART, (C-5) [Located at PLANT 5]

1178 TAYLOR DUNN ENCLOSED ELECTRIC PERSONNEL CART, (E-4) [Located at PLANT 5]








1186 EZGO ELECTRONIC PERSONNEL CART, (E-6) [Located at PLANT 5]

1187 TAYLOR DUNN ELECTRONIC PERSONNEL CART, (C-9) [Located at PLANT 5]






1193 E-Z-GO ELECTRONIC PERSONNEL CART, (C-9) [Located at PLANT 5]


- Page 42 -













1207 E-Z-GO ELECTRONIC PERSONNEL CART, (C-6) [Located at PLANT 5]





1212 TAYLOR DUNN ELECTRONIC PERSONNEL CART, (D-6) [Located at PLANT 5]



1215 TAYLOR DUNN ELECTRONIC PERSONNEL CART, (E-6) [Located at PLANT 5]



1218 E-Z-GO ELECTRONIC PERSONNEL

- Page 43 -

CART, (E-7) [Located at PLANT 5]1219 E-Z-GO ELECTRONIC PERSONNEL

CART, (E-7) [Located at PLANT 5]

1220 E-Z-GO ELECTRONIC PERSONNEL CART, (D-9) [Located at PLANT 5]

1221 CUSHMAN 3 WHEEL PERSONNEL CART, (C-9) [Located at PLANT 5]

1222 TAYLOR DUNN 3 WHEEL PERSONNEL CART, (C-6) [Located at PLANT 5]





1227 TAYLOR DUNN 3 WHEEL PERSONNEL CART, (D-9) [Located at PLANT 5]










1237 CUSHMAN 3 WHEEL PERSONNEL CART, (D-7) [Located at PLANT 5]


1239 MONTREC 3 WHEEL PERSONNEL CART, (D-7) [Located at PLANT 5]



1242 TENNANT 7400 LPG RIDER FLOOR SCRUBBER, S/N 5571; (A-6) [Located at PLANT 5]

1243 YALE GLP 120MJNGBE095 12,000--LB

- Page 44 -

. CAPACITY LPG FORKLIFT, S/N C813V02274Z; (# 162); 185" Lift; Cushion Tires; Cab Minus Doors; (Plt 5-8) [Located at PLANT 5]

1244 YALE GLP 120MJNGBE095 12,000--LB. CAPACITY LPG FORKLIFT, S/N C813V02271Z; (# 161); 185" Lift; Cushion Tires; Cab Minus Doors; (Plt 5-8) [Located at PLANT 5]

1245 YALE GLP110MGNGBE088 11,000--LB. CAPACITY CPG FORKLIFT, S/N B813D02729U; Cushion Tires; 179" Lift; Cab Minus Doors; With Heat; 360 Degrees Rotator Attachment; (Plt 5-8) [Located at PLANT 5]

1246 YALE 12,000--LB. CAPACITY ELECTRIC FORKLIFT, S/N A839V02681W; Note: No Batteries; (Plt 5-8); [Located at PLANT 5]

1247 YALE 12,000--LB. CAPACITY ELECTRIC FORKLIFT, S/N A839D01864T; Note: No Batteries; (Plt 5-8); [Located at PLANT 5]

1248 YALE 12,000--LB. CAPACITY ELECTRIC FORKLIFT, S/N A839N01531Y; Note: No Batteries; (Plt 5-8); [Located at PLANT 5]


1250 YALE ERC100HBN36SV075 10,000--LB. CAPACITY ELECTRIC FORKLIFT, S/N NU21191; (Plt 5-8) [Located at PLANT 5]

1251 YALE 12,000--LB. CAPACITY ELECTRIC FORKLIFT, S/N A839V02582W Note: No Batteries; (Plt 5-8); [Located at PLANT 5]



1254 YALE 12,000--LB. CAPACITY ELECTRIC FORKLIFT, S/N A839V02680W; Note: No Batteries; (Plt 5-8); [Located at PLANT 5]


1256 YALE 12,000-LB ELECTRIC FORKLIFT, No batteries; S/N A839V02573W [Located at PLANT 5]

1257 CLARK GT60E GASOLINE TOW TRACTOR, S/N GT360-0019-8191; 6000--LB. Drawbar Pull; (Plt 5-8), [Located at PLANT 5]

1258 GENERAL 18 CELL 36 VOLT BATTERY, [Located at PLANT 5]

1259 LOT: ASSTD TIRES W/RACK, [Located at PLANT 5]

1260 ECONO 8000 LB CAP. LIFT TABLE, (A-9) [Located at PLANT 5]

1261 ECONO 8000 LB CAP. LIFT TABLE, (A

- Page 45 -

-10) [Located at PLANT 5]1262 GORBEL 500--LB. CAPACITY

OVERHEAD RAIL HOIST SYSTEM, 10' Span; Approx. 60' Length; (Stored); (Plt 5-8); Col# A-10, [Located at PLANT 5]

1263 LOT: ASSTD SELF DUMPING HOPPERS, (C-20) [Located at PLANT 5]

1264 CROWN WALK BEHIND ELECTRIC PALLET TRUCK, (C-8) [Located at PLANT 5]



1267 YALE WALK BEHIND ELECTRIC PALLET TRUCK, (C-10) [Located at PLANT 5]

1268 YALE WALK BEHIND ELECTRIC PALLET TRUCK, (C-12) [Located at PLANT 5]

1269 WALK BEHIND ELECTRIC PALLET TRUCK, (C-11) [Located at PLANT 5]

1270 CLARK WALK BEHIND ELECTRIC PALLET TRUCK, (C-11) [Located at PLANT 5]

1271 WALK BEHIND ELECTRIC PALLET TRUCK, (A-9) [Located at PLANT 5]










1281 POWER BOSS 24 VOLT BATTERY CHARGER, (G-22) [Located at PLANT 5]

1282 POWER BOSS 36 VOLT BATTERY CHARGER, (F-3) [Located at PLANT 5]

1283 HERTNER 24 VOLT BATTERY CHARGER, (C-17) [Located at PLANT 5]

1284 HOBART 36 VOLT BATTERY CHARGER S/N 395CS13048, (D-10) [Located at PLANT 6]

1285 HOBART 36 VOLT BATTERY CHARGER S/N 295C506303, (D-10) [Located at PLANT 6]




1289 HOBART 36 VOLT BATTERY

- Page 46 -

CHARGER S/N 395CSW12110, (D-9) [Located at PLANT 6]





1294 HOBART 36 VOLT BATTERY CHARGER S/N 395CS0547B, (D-9) [Located at PLANT 6]

1295 HOBART 36 VOLT BATTERY CHARGER S/N 498C816505, (L-32) [Located at PLANT 2]

1296 HOBART 36 VOLT BATTERY CHARGER S/N 395CS11822, (L-32) [Located at PLANT 2]















1311 HOBART 36 VOLT BATTERY CHARGER S/N 196CS03507, (H-31) [Located at PLANT 2]

1312 HOBART 36 VOLT BATTERY

- Page 47 -

CHARGER S/N 196CS03504, (H-31) [Located at PLANT 2]











1323 TENNANT 5700XP BATTERY POWERED FLOOR SCRUBBER, WALK-BEHIND; S/N NA; (Plt 8-2); Col# C-4 [Located at PLANT 8]

1324 TENNANT 5400 BATTERY POWERED FLOOR SCRUBBER, WALK-BEHIND; S/N NA; (Plt 8-2); Col# C-4 [Located at PLANT 8]

1325 KINETIC TECHNOLOGIES (K-TEC) 2060 PALLET TRANSFER CART, 2000--LB. CAPACITY; 46"X55"; (Plt 8-4); Col# C-10 [Located at PLANT 8]







1332 KINETIC TECHNOLOGIES (K-TEC)

- Page 48 -

2060 PALLET TRANSFER CART, 2000--LB. CAPACITY; 46"X55"; (Plt 8-4); Col# C-10 [Located at PLANT 8]


1334 KINETIC TECHNOLOGIES (K-TEC) 2060 Qty (2) of PALLET TRANSFER CART, 2000--LB. CAPACITY; 46"X55"; (Plt 8-4); Col# C-10 [Located at PLANT 8]

1335 AIRFLOAT AIR LIFT/TILT TABLE 60" X 48", (C-10) [Located at PLANT 8]

1336 HURKULES AIR LIFT TABLE, (B-6); 3000--LB. CAPACITY; 25"X40" [Located at PLANT 8]

1337 LOT: (35) SELF DUMPING HOPPERS, (B-5) [Located at PLANT 8]

1338 ESAB PCM-875 PLASMA CUTTER, (B-5) [Located at PLANT 8]

1339 58" X 48" AIR LIFT TABLE, (C-3) [Located at PLANT 8]

1340 LOT: (5) SECTIONS PALLET RACKING, [Located at PLANT 8]

1341 LOT: (5) SECTIONS PALLET RACKING, [Located at PLANT 8]

1342 EQUIPTO 10 DRAWER TOOL CABINET, (C-9) [Located at PLANT 8]




1346 EQUIPTO 10 DRAWER TOOL CABINET, (D-9) [Located at PLANT 8]





1351 EQUIPTO Qty (2) of 7 DRAWER TOOL CABINET, (C-9) [Located at PLANT 8]

1352 EQUIPTO Qty (2) of 7 DRAWER TOOL CABINET, (C-9) [Located at PLANT 8]


1354 EQUIPTO 10 DRAWER TOOL CABINET, (B-4) [Located at PLANT 8]

1355 LISTA 6 DRAWER TOOL CABINET, (B-6) [Located at PLANT 8]

1356 STRONG HOLD 5 DOOR CABINET, (C-8) [Located at PLANT 8]







1363 STRONG HOLD 8 DOOR CABINET, (C

- Page 49 -

-9) [Located at PLANT 8]1364 STRONG HOLD 9 DOOR CABINET, (C

-9) [Located at PLANT 8]

1365 STRONG HOLD Qty (2) of 2 DOOR CABINET, (B-4) [Located at PLANT 8]

1366 EAGLE 2 DOOR FLAMMABLE STORAGE CABINET, (B-4) [Located at PLANT 8]

1367 LOT: (3) HAZARDOUS STORAGE CABINETS, (B-4) [Located at PLANT 8]

1368 GANG BOX, (B-4) [Located at PLANT 8] 1369 LOT: (9) CABINETS, LOCKERS;

SHELVES; (C-5) [Located at PLANT 8]

1370 LOT: (6) ASSTD CABINETS, (B-5) [Located at PLANT 8]

1371 STRONG HOLD LOT: (3) ASSTD CABINETS, (B-6) [Located at PLANT 8]

1372 LOT: ASSTD FILE CABINETS, (B-5) [Located at PLANT 8]

1373 LOT: (4) ASSTD CABINETS, (B-9) [Located at PLANT 8]

1374 BIRDSALL TOOL AND GAGE TABLE, (B-11) [Located at PLANT 8]

1375 STRONG HOLD CABINET, (B-11) [Located at PLANT 8]

1376 EQUIPTO WORKBENCH AND FOREMANS DESK, [Located at PLANT 8]

1377 LOT: (3) ASSTD CABINETS, (F-10; F-11) [Located at PLANT 8]

1378 LOT: LOKERS, (F-12) [Located at PLANT 8]



1381 ZIMMERMAN HOIST 15' X 30' 4-LEGS STEEL SUPPORT STAND, NO HOIST; (E-13) [Located at PLANT 8]

1382 10' X 12' 4-LEGS STEEL SUPPORT STAND, NO HOIST; (E-13) [Located at PLANT 8]

1383 AIR LIFT TABLE 4500 LB CAP., (F-13) [Located at PLANT 8]



1386 AIR LIFT AND TILT TABLE, (F-12) [Located at PLANT 8]

1387 AIR LIFT AND TILT TABLE, (F-12) [Located at PLANT 8]


1388.01 LIFT TABLE, (E-9) [Located at PLANT 8]

1388.02 PENTALIFT LIFT TABLE, (E-9) [Located at PLANT 8]

1388.03 LIFT TABLE, (E-9) [Located at PLANT 8]

1388.04 Qty (2) of 6000 CAP. LIFT TABLES, (C-11) [Located at PLANT 8]

1388.05 Qty (4) of 6000 CAP. LIFT TABLES, (C-11) [Located at PLANT 8]

1389 AIR LIFT TABLE 4500 LB CAP., (E-9) [Located at PLANT 8]

1390 ABB IRB6400 M98 ROBOT, S/N 64A-10665; (B-4) [Located at PLANT 8]

1391 ABB IRB6400 M98 ROBOT, S/N 64A-

- Page 50 -

10670; (B-4) [Located at PLANT 8]1392 GENESIS VERSA 4M-DOUBLE DUAL

STATION CNC ROBOTIC WELDING CELL, S/N 1459; (2001); Dual Station Power Trunnion Welding Fixtures; Fanuc Arc Mate 100i 6-Axis CNC Welding Robots With R-J3 Controls; Panasonic AAII500 DC Welding Power Supplies; Unitized Steel Frame Base; With Steel Side Enclosures; Allen Bradley 5/04-CPU Controls With Panel View 1000; Torit Dust Collector With Checker Board Programmable Controls; BT# 608252; (Plt 2-2/Col# F-27) [Located at PLANT 8]

1393 GENESIS VERSA 4M-DOUBLE DUAL STATION CNC ROBOTIC WELDING CELL, S/N 1330; (2000); Dual Station Power Trunnion Welding Fixtures; Fanuc Arc Mate 100i 6-Axis CNC Welding Robots With R-J3 Controls; Panasonic AAII500 DC Welding Power Supplies; Unitized Steel Frame Base; With Steel Side Enclosures; Allen Bradley 5/04-CPU Controls With Panel View 1000; Torit Dust Collector With Checker Board Programmable Controls; BT# 607503; (Plt 2-2/Col# G-24) [Located at PLANT 8]

1394 GENESIS VERSA 4-M-DOUBLE DUAL STATION CNC ROBOTIC WELDING CELL, S/N 1151; (1999); (2) Dual Station Power Trunnion Type Welding Fixtures; (2) Fanuc Arc Mate 100i 6-Axis CNC Welding Robots With R-J3 Controls; (2) Panasonic AAII500 DC Welding Power Supplies; Unitized Steel Frame Base With Steel Side Enclosures; Torit Donaldson Dust Collector; (8) Replaceable Cartridge Filters; Torit Checker Board Programmable Controls; BT# 603794; (Plt 2-2); Col# F-24 [Located at PLANT 8]

1395 GENESIS VERSA 4M CNC ROBOTIC WELDING CELL, S/N 1329; (2000); Dual Station Stationary Power Trunnion Fixture; Fanuc Arc Mate 100i 6-Axis CNC Welding Robot; With R-J3 Control; Panasonic PanaStar 500 AAII Welding Power Supply; Unitized Steel Frame Base With Steel Panel Enclosures; Allen Bradley PLC Controls; Torit Dust Collector With Checker Board Programmable Controls; BT# 607502; (Plt 2-2); Col# G-24, [Located at PLANT 8]

1396 GENESIS VERSA 4M CNC ROBOTIC WELDING CELL, S/N 1150; (1999); Dual Station Stationary Power Trunion Fixture; (2) Fanuc Arc Mate 100i 6-Axis CNC Welding Robots; S/Ns NA; (2) Panasonic PanaStar 500 AAII Welding Power Supplies; Unitized Steel Frame Base With Steel Panel Enclosures; Allen Bradley SLC-5/04 PLC Control; With Panel View 900; Torit Donaldson Model DF DownFlo Dust Collector; S/N IG543708-005; Pneumatic Pulse Jet Cleaning; Torit Checkerboard Programmable Controls; BT# 603793; (Plt 2-2); Col# F-23 [Located at PLANT 8]

1397 GENESIS VERSA 4M CNC ROBOTIC WELDING CELL, S/N S01149 (1999);

- Page 51 -

Dual Station Stationary Power Trunnion Fixture; (1) Fanuc Arc Mate 100i 6-Axis CNC Welding Robot; With System R-J3 Control; Panasonic PanaStar 500 AAII Welding Power Supply; Allen Bradley SLC-5/04 PLC Control With Panel View 900; Unitized Steel Frame Base; Steel Panel Enclosures; With Torit Donaldson Model DFD2-12 DownFlo Dust Collector; S/N IG543708-005; 15-HP; (6) Replaceable Cartridge Filters; Pneumatic Pulse Jet Cleaning; Torit Checker Board Programmable Control; Koolant Koolers Model KV3000 Process Water Chiller; S/N 21426; BT# 603792; (Plt 2-2); Col# F-22 [Located at PLANT 8]

1398 AUTO/CON TUBE WELDING FIXTURE, With Fanuc Arc Mate 100iB 6-Axis CNC Welding Robot; R05Z75288 (2005); With System R-J3iB Control; Panasonic AAII 500 Digital Interface Welding Power Supply; BT# 620268; (Plt 2-2/Col# F-23) [Located at PLANT 8]

1399 AUTO/CON TUBE WELDING FIXTURE, With Fanuc Arc Mate 100iB 6-Axis CNC Welding Robot; R05Z75288 (2005); With System R-J3iB Control; Panasonic AAII 500 Digital Interface Welding Power Supply; BT# 620292; (Plt 2-2/G-24) [Located at PLANT 8]

1400 ACRO TUBE WELDER, S/N 1819; Acro Projection Resistance Welder; Fanuc LR Mate 200iB-5P Robotic Load/Unload With British Federal WS4004 Programmable Weld Control; BT# 607933; (Plt 2-2/Col# G-24) [Located at PLANT 8]

1401 ACRO TUBE WELDER, S/N 1819; Acro Projection Resistance Welder; Fanuc LR Mate 200iB-5P Robotic Load/Unload With British Federal WS4004 Programmable Weld Control; BT# 607935; (Plt 2-2/Col# F-23) [Located at PLANT 8]

1402 LAMB REAR AXLE PRESS & SLUG WELD MACHINE, 8-Station; Walking Beam Thru-Feed; Gantry Robot Load/Unload; Spectrum Automation Model 0645GHD Slug Feeder; S/N 4441; Allen Bradley Panel View 1000 Control; BT# 104709; (Plt 2-3); Col# C-15; CUSTOM BUILT [Located at PLANT 8]

1403 DUSTEX CJU400 CENTRALIZED DUST COLLECTION SYSTEM, S/N 9223062; BT# 104709; (Plt 2-3); Col# C-15 [Located at PLANT 6]


1405 EQUIPTO 10 DRAWER TOOL CABINET, (F-10) [Located at PLANT 6]






1411 EQUIPTO 10 DRAWER TOOL

- Page 52 -

CABINET, (F-10) [Located at PLANT 6]1412 8 DRAWER TOOL CABINET, (F-10) [

Located at PLANT 6]












1424 EQUIPTO 12 DRAWER WORK BENCH, (F-11) [Located at PLANT 6]


















1442 EQUIPTO Qty (4) of 6 DRAWER TOOL CABINET, (F-11) [Located at PLANT 6]




- Page 53 -





1450 STRONG HOLD 2 DOOR CABINET, (F-11) [Located at PLANT 6]

1451 STRONG HOLD Qty (4) of 2 DOOR CABINETS, (F-11) [Located at PLANT 6]




1455 STRONG HOLD Qty (3) of 2 DOOR CABINETS, (E-11) [Located at PLANT 6]

1456 STRONG HOLD 2 DOOR CABINET, (E-11) [Located at PLANT 6]

1457 Qty (5) of 3 DOOR LOCKERS, (E-11) [Located at PLANT 6]

1458 LOT: LOCKERS, (D-13) [Located at PLANT 6]

1459 LOT: LOCKERS, (D-13) [Located at PLANT 6]

1460 STRONG HOLD 2 DOOR SUPPLY CABINET, (E-12) [Located at PLANT 6]

1461 LOT: (2) ASSTD CABINETS, [Located at PLANT 6]

1462 2 DOOR SUPPLY CABINET, (E-13) [Located at PLANT 6]

1463 JUST RITE 2-DOOR FLAMMABLES STORAGE CABINET, 45-Gal. Capacity; 65" Height x 42" Width; Adjustable Shelves; (Plt 6-5); Col# E-13, [Located at PLANT 6]







- Page 54 -



1472 LOT: (7) ASSTD PARTS, CABINETS; W/HARDWARE; (F-12) [Located at PLANT 6]

1473 Qty (3) of HOSERACKS W/HOSE 9E-120, [Located at PLANT 6]

1474 36" X 24" CAST IRON SURFACE, (E-12) [Located at PLANT 6]

1475 LOT: (14) SECTIONS RACKING W/ASSTD FILTERS, (E-12) [Located at PLANT 6]

1476 AIR GAGE TABLE, (C-15) [Located at PLANT 6]

1477 FANUC LOT: MOTORS, (1 SKID); (A-15) [Located at PLANT 6]

1478 FANUC LOT: MOTORS, (1 SKID); (A-15) [Located at PLANT 6]

1479 LOT: (2) MOTORS, (1 SKID); (A-15) [Located at PLANT 6]


1481 LOT: MOTORS, (1 SKID); (A-15) [Located at PLANT 6]




1485 LOT: ASSTD MOTORS, (1 SKID); (A-15) [Located at PLANT 6]




1489 LOT: ASSTD MOTORS, (1 SKID); (A-15) [Located at PLANT 6]

1490 LOT: MOTOR, (1 SKID); (A-15) [Located at PLANT 6]






1496 LOT: MOTOR, (1 SKID); (A-15) [Located at PLANT 6]

1497 LOT: (2) MOTORS, (1 SKID); (B-15) [Located at PLANT 6]

1498 LOT: ASSTD MOTORS, (1 SKID); (B-15) [Located at PLANT 6]


1500 LOT: (2) MOTORS, (1 SKID); (B-15) [

- Page 55 -

Located at PLANT 6]1501 LOT: MOTORS, (1 SKID); (B-15) [

Located at PLANT 6]




1505 LOT: MOTORS, (1 SKID); (B-15) [Located at PLANT 6]

1506 LOT: MOTORS, (1 SKID); (B-15) [Located at PLANT 6]

1507 MOTOR, (1 SKID); (B-15) [Located at PLANT 6]












1519 PANASONIC TRANSFORMER, (B-15) [Located at PLANT 6]

1520 LOT: ASSTD MOTORS, (2 SKIDS); (B-15) [Located at PLANT 6]

1521 LOT: (2) MOTORS, (2 SKIDS); (B-15) [Located at PLANT 6]














- Page 56 -








1542 LOT: ASSTD MOTORS, (1 SKID); (C-15) [Located at PLANT 6]



1545 LOT: (2) MOTORS, (1 SKID); (C-15) [Located at PLANT 6]
























1569 LOT: ASSTD MOTORS, (1 SKID); (C-15

- Page 57 -

) [Located at PLANT 6]1570 LOT: ASSTD MOTORS, (1 SKID); (C-15

) [Located at PLANT 6]









1579 MOTOR, (1 SKID); (C-15) [Located at PLANT 6]







1586 LOT: ASSTD MOTORS, (5 SKIDS); (B-14) [Located at PLANT 6]

1587 LOT: ASSTD ELECTRICAL, (1 SKID); (B-8) [Located at PLANT 6]




1591 LOT: ASSTD CIRCUIT BOARDS, (1 SKID); (B-8) [Located at PLANT 6]










1601 ATLAS COPCO Qty (2) of TENSOR CONTROL PANELS, (B-8) [Located at PLANT 6]

1602 LOT: ASSTD ELECTRICAL CABLE, (1 SKID); (B-8) [Located at PLANT 6]

1603 LOT: ASSTD ELECTRICAL, (1 SKID); (

- Page 58 -

B-8) [Located at PLANT 6]1604 LOT: ASSTD ELECTRICAL, (1 SKID); (

B-8) [Located at PLANT 6]


1606 LOT: ASSTD CIRCUIT BOARDS, (1 SKID); (C-8) [Located at PLANT 6]

1607 LOT: ASSTD ELECTRICAL, (1 SKID); (C-8) [Located at PLANT 6]





1612 FANUC 45 KVA TRANSFORMER, [Located at PLANT 6]

1613 LOT: (2) ASSTD COOLING UNITS, [Located at PLANT 6]


1615 SQUARE D Qty (2) of SAFETY SWITCHES, [Located at PLANT 6]




1619 CONTROL PANEL, [Located at PLANT 6]




1623 SERVO LOT: ASSTD MOTORS, (1 SKID); (B-8) [Located at PLANT 6]





1628 # VALUE!, [Located at PLANT 6] 1629 # VALUE!, [Located at PLANT 6] 1630 LOT: ASSTD ELECTRICAL, (1 SKID); (









1638 LOT: ASSTD ELECTRICAL CABLES, (2 SKIDS) (B-8) [Located at PLANT 6]

- Page 59 -
















1654 LOT: ASSTD ELECTRICAL CABLES, (1 SKID) (B-8) [Located at PLANT 6]


1656 ATLAS COPCO Qty (5) of DRILL UNITS 9B-80, [Located at PLANT 6]









1665 LOT: ASSTD CIRCUIT BOARDS, (1 SKID) (B-8) [Located at PLANT 6]






1671 SERVO LOT: ASSTD MOTORS, (1 SKID); (B-8) [Located at PLANT 6]


1673 LOT: ASSTD ELECTRICAL, (1 SKID); (

- Page 60 -

C-8) [Located at PLANT 6]1674 LOT: ASSTD ELECTRICAL, (1 SKID); (

C-8) [Located at PLANT 6]

1675 LOT: BALANCERS, (1 SKID); (C-8) [Located at PLANT 6]



1678 LOT: ASSTD ELECTRICAL CABLES, (1 SKID) (C-8) [Located at PLANT 6]





1683 LOT: (3) ASSTD MOTORS, (1 SKID); (B-8) [Located at PLANT 6]

1684 AC SPINDLE SERVO UNIT, [Located at PLANT 6]





1689 LOT: ASSTD ELECTRICAL TOOLS, (1 SKID); (B-8) [Located at PLANT 6]

1690 LOT: ASSTD ELECTRICAL TOOLS, (1 SKID) [Located at PLANT 6]


1692 LOT: ASSTD ELECTRICAL CABLES, (1 SKID) (B-8) [Located at PLANT 6]



1695 LOT:SAFETY FLOOR MATS, (1 SKID); (B-8) [Located at PLANT 6]

1696 LOT: ASSTD PNEUMATIC CYLINDERS, (1 SKID) (B-7) [Located at PLANT 6]

1697 LOT: ASSTD PNEUMATIC CYLINDERS, [Located at PLANT 6]

1698 LOT: PNEUMATIC CYLINDERS, VALVES; (1 SKID) (B-7) [Located at PLANT 6]

1699 LOT: ASSTD REPAIR PARTS, (1 SKID); (B-7) [Located at PLANT 6]






1705 LOT: ASSTD BALL SCREWS, (1 SKID); (B-7) [Located at PLANT 6]


- Page 61 -



1709 LOT: (3) PNEUMATIC CYLINDERS , (C-7) [Located at PLANT 6]

1710 LOT: ASSTD PNEUMATIC CYLINDERS, (1 SKID) (C-7) [Located at PLANT 6]

1711 LOT: ASSTD REPAIR PARTS, (1 SKID); (C-7) [Located at PLANT 6]






1717 LOT: ASSTD VALVES, (1 SKID); (C-7); (C-7) [Located at PLANT 6]

1718 LOT: ASSTD PNEUMATIC CYLINDERS, (B-7) [Located at PLANT 6]












1730 LOT: SCREWS, SLIDES; (1 SKID); (B-7) [Located at PLANT 6]


1732 LOT: ASSTD MACHINE SCREWS, (1 SKID) (B-7) [Located at PLANT 6]





- Page 62 -








1744 LOT: MOTORS, (1 SKID); (B-7); (B-7) [Located at PLANT 6]















1759 LOT: ASSTD V BELTS, (1 SKID); (B-7); (B-7) [Located at PLANT 6]





1764 LOT: ASSTD BROACHES, (1 SKID; (B-7) [Located at PLANT 6]


1766 LOT: ASSTD REPAIR PARTS, (2 SKIDS); (C-6) [Located at PLANT 6]




1770 LOT: ASSTD REPAIR PARTS, (2 SKIDS

- Page 63 -

); (C-6) [Located at PLANT 6]1771 LOT: ASSTD REPAIR PARTS, (2 SKIDS

); (C-6) [Located at PLANT 6]



1774 LOT: ASSTD REPAIR PARTS, (2 SKIDS); (B-6) [Located at PLANT 6]




1778 LOT: ASSTD FILTERS, (2 SKIDS); (B-6) [Located at PLANT 6]

1779 LOT: MISCELLANEOUS, (2 SKIDS); (B-6) [Located at PLANT 6]

1780 LOT: ASSTD PIPE MARKERS, (4 BOXES); (B-6) [Located at PLANT 6]

1781 LOT: MISCELLANEOUS, (2 SKIDS); (B-6) [Located at PLANT 6]

1782 LOT: ASSTD PHONES, FOLERS; (2 SKIDS); (B-6) [Located at PLANT 6]

1783 LOT: ASSTD FILTERS, (2 SKIDS); (B-6) [Located at PLANT 6]




1787 LOT: ASSTD FILTERS, (2 SKIDS); (C-6) [Located at PLANT 6]


1789 LOT: ASSTD WELDING SUPPLIES, (3 SKIDS) (B-6) [Located at PLANT 6]

1790 LOT: SPRAY GUN TIPS, (1 SKID); (B-6) [Located at PLANT 6]

1791 LOT: ASSTD FILTERS AND HOSE, (3 SKIDS) (B-6) [Located at PLANT 6]

1792 LOT: ASSTD FILTERS, (1 SKID); (B-6) [Located at PLANT 6]

1793 LOT: ASSTD FILTERS, ETC; (3 SKIDS); (B-6) [Located at PLANT 6]

1794 LOT: ASSTD V BELTS, (1 SKID); (B-6) [Located at PLANT 6]


1796 LOT: ASSTD REPAIR PARTS, (3 SKIDS) [Located at PLANT 6]

1797 LOT: ASSTD TOOLING, (2 BOXES); (C-6) [Located at PLANT 6]

1798 ATLAS COPCO LOT: ASSTD CONTROLLERS, (2 SKIDS); (B-6) [Located at PLANT 6]

1799 MOTOR, (B-6) [Located at PLANT 6] 1800 LOT:ELECTRICAL BOXES, (1 SKID); (


1801 Qty (5) of BALANCERS, [Located at PLANT 6]


1803 LOT: ASSTD LIGHTS, (1 SKID); (B-6) [Located at PLANT 6]

1804 LOT: ASSTD TOOLING, (1 SKID); (N-4) [Located at PLANT 2]

- Page 64 -




1808 LOT: ASSTD REPAIR PARTS, (1 SKID); (N-4) [Located at PLANT 2]


1810 LOT: ASSTD CARBIDE INSERTS, (1 SKID) [Located at PLANT 2]


1812 LOT: ASSTD TOOLING, (1 SKID); (N-3); (N-4) [Located at PLANT 2]

1813 LOT: ABRASIVES, (1 SKID); (N-4) [Located at PLANT 2]

1814 LOT: ASSTD CARBIDE INSERTS, ETC; (1 SKID) (N-4) [Located at PLANT 2]

1815 LOT: ASSTD REPAIR PARTS, (2 SKIDS); (N-4) [Located at PLANT 2]



1818 LOT: ASSTD REPAIR PARTS, (1 SKID); (N-4) [Located at PLANT 2]


1820 LOT: MISCELLANEOUS, (2 SKIDS); (N-4) [Located at PLANT 2]

1821 LOT: ASSTD REPAIR PARTS, TOOLING; (3 SKIDS) (N-3) [Located at PLANT 2]



1824 LOT: ASSTD REPAIR PARTS, (3 SKIDS); (M-4) [Located at PLANT 2]


1826 LOT: REPAIR PARTS, TOOLING; (4 SKIDS) (M-4) [Located at PLANT 2]

1827 LOT: ASSTD TOOLING, (1 SKID); (M-4) [Located at PLANT 2]

1828 LOT: MATS, REPAIR PARTS; (2 SKIDS); (M-4) [Located at PLANT 2]


1830 LOT: CONTROL PANELS, (2 SKIDS); (M-4) [Located at PLANT 2]

1831 LOT: ASSTD ELECTRICAL, (2 SKIDS); (M-3) [Located at PLANT 2]



1834 LOT: ASSTD SLIDES, ETC; (1 SKID); (M-4) [Located at PLANT 2]





- Page 65 -


1840 LOT: ASSTD REPAIR PARTS, (1 SKID); (M-4) [Located at PLANT 2]

1841 LOT: ASSTD REPAIR PARTS, (2 SKIDS); (L-5) [Located at PLANT 2]


1843 LOT: ASSTD FILTERS, (2 SKIDS); (L-5) [Located at PLANT 2]


1845 LOT: ASSTD REPAIR PARTS, ETC; (2 SKIDS) (L-5) [Located at PLANT 2]

1846 LOT: MISCELLANEOUS, (2 SKIDS) [Located at PLANT 2]

1847 LOT: ASSTD FILTERS, ETC; (2 SKIDS); (L-5) [Located at PLANT 2]

1848 LOT: ASSTD SPINDLES, (2 SKIDS); (L-5) [Located at PLANT 2]


1850 LOT: ASSTD REPAIR PARTS, (1 SKID); (L-5) [Located at PLANT 2]



1853 LOT: FILTERS, VALVES; (2 SKIDS); (L-4) [Located at PLANT 2]



1856 LOT: ASSTD HOSE, (1 SKID); (L-4) [Located at PLANT 2]

1857 LOT: OIL SEALS, CYLINDERS; (2 SKIDS); (L-4) [Located at PLANT 2]

1858 LOT: MISCELLANEOUS, (2 SKIDS); (L-4) [Located at PLANT 2]

1859 BOSCH HYDRAULIC UNIT, (L-4) [Located at PLANT 2]

1860 LOT: CYLINDERS, ETC; (3 SKIDS); (L-4) [Located at PLANT 2]


1862 LOT: ASSTD ELECTRICAL, (2 SKIDS); (L-4) [Located at PLANT 2]

1863 LOT: ASSTD REPAIR PARTS, (1 SKID); (L-4) [Located at PLANT 2]







1870 LOT: MISCELLANEOUS, (2 SKIDS); (L-3) [Located at PLANT 2]



1873 LOT: ASSTD REPAIR PARTS, (2 SKIDS

- Page 66 -

); (L-3) [Located at PLANT 2]1874 LOT: ASSTD REPAIR PARTS, (2 SKIDS

); (L-3) [Located at PLANT 2]



1877 LOT: ASSTD MOTORS, (3 SKIDS); (L-3) [Located at PLANT 2]

1878 LOT: ASSTD MOTORS, ELECTRICAL; (3 SKIDS) (L-3) [Located at PLANT 2]

1879 LOT: ASSTD WIRE, (1 SKID); (L-3) [Located at PLANT 2]



1882 LOT: ASSTD MOTORS, ETC; (3 SKIDS); (L-3) [Located at PLANT 2]




1886 LOT: TOOLING, ETC; (2 SKIDS); (K-3) [Located at PLANT 2]

1887 LOT: ASSTD TOOLING, (2 SKIDS); (K-3) [Located at PLANT 2]

1888 LOT: ASSTD TOOLING, (2 SKIDS); (K-3) [Located at PLANT 2]

1889 LOT: ASSTD REPAIR PARTS, (2 SKIDS); (K-3) [Located at PLANT 2]

1890 LOT: ASSTD BEARINGS, (1 SKID); (K-3) [Located at PLANT 2]

1891 LOT: (2)DRIVE UNITS, (2)LEAD SCREWS; (K-3) [Located at PLANT 2]




1895 LOT: GEARS AND CHAIN, (3 SKIDS); (K-3) [Located at PLANT 2]




1899 LOT: ASSTD SCREWS, (3 SKIDS); (K-3) [Located at PLANT 2]

1900 LOT: ASSTD CHAIN,ETC, (2 SKIDS); (K-3) [Located at PLANT 2]

1901 LOT: TAPE, ROLLER CONVEYOR; ETC; (3 SKIDS) (K-4) [Located at PLANT 2]

1902 LOT: SHOP SUPPLIES, (3 SKIDS); (K-4) [Located at PLANT 2]


1904 LOT: FILTER MATERIAL, TAGS; REPAIR PARTS (3 SKIDS) (K-4) [Located at PLANT 2]

1905 LOT: TAGS, FORMS; (2 SKIDS); (K-4) [Located at PLANT 2]

1906 LOT: SHOVELS, ETC; (3 SKIDS); (K-4) [Located at PLANT 2]

- Page 67 -

1907 LOT: SHOP SUPPLIES, (3 SKIDS); (K-4) [Located at PLANT 2]


1909 LOT: MISCELLANEOUS, (1 SKID); (C-14) [Located at PLANT 8]

1910 Open 1911 LOT: LIGHT CURTAINS, (1 SKID); (C-

14) [Located at PLANT 8]

1912 LOT: ASSTD ELECTRICAL, (2 SKIDS); (D-14) [Located at PLANT 8]


1914 LOT: ASSTD ELECTRICAL, (1 SKID); (E-14) [Located at PLANT 8]



1917 LOT: ALLEN WRENCHES, BOLTS; (1 SKID); (C-13) [Located at PLANT 8]

1918 RITTAL COOLING UNIT, (C-13) [Located at PLANT 8]


1920 LOT:ASSTD ELECTRICAL,ETC, (3 SKIDS); (E-14) [Located at PLANT 8]

1921 LOT: ASSTD ELECTRICAL, (2 SKIDS); (C-13) [Located at PLANT 8]




1925 LOT: ASSTD ELECTRICAL, (2 SKIDS); (E-13) [Located at PLANT 8]



1928 LOT: ASSTD ELECTRICAL, (1 SKID); (D-13) [Located at PLANT 8]










1938 LOT:ASSTD ELECTRICAL,ETC, (5 SKIDS); (D-13) [Located at PLANT 8]

1939 LOT:ASSTD ELECTRICAL,ETC, (2 SKIDS); (D-13) [Located at PLANT 8]

1940 LOT: ASSTD BEARINGS, (2 SKIDS); (D-13) [Located at PLANT 8]

1941 LOT: MACHINE PARTS, (3 SKIDS); (D-13) [Located at PLANT 8]

- Page 68 -

1942 LOT: ASSTD REPAIR PARTS, (4 SKIDS); (E-13) [Located at PLANT 8]

1943 LOT: MISCELLANEOUS, (2 SKIDS); (D-13) [Located at PLANT 8]

1944 LOT: ASSTD REPAIR PARTS, (3 SKIDS); (D-13) [Located at PLANT 8]

1945 TOYODA LOT: MACHINE PARTS, (5 SKIDS); (D-13) [Located at PLANT 8]

1946 LOT: MACHINE SCALES, (1 SKID); (E-13) [Located at PLANT 8]

1947 LOT: MACHINE PARTS,ETC, (3 SKIDS); (D-13) [Located at PLANT 8]



1950 LOT: MACHINE PARTS, (2 SKIDS); (E-13) [Located at PLANT 8]

1951 LOT: ASSTD GEARS, (1 SKID); (D-12) [Located at PLANT 8]




1955 LOT: ASSTD CUTTING TOOLS, (1 SKIDS); (D-12) [Located at PLANT 8]




1959 LOT: FILTERS, ETC; (4 SKIDS); (E-12) [Located at PLANT 8]

1960 REMCOR CH1563A LIQUID COOLING SYSTEM, (C-12) [Located at PLANT 8]



1963 TOYODA REFRIGERATION COMPRESSOR, (D-12) [Located at PLANT 8]


1965 LOT: ASSTD HOISTS, (2 BOXES); (D-12) [Located at PLANT 8]


1967 LOT: PAINT POTS, PUMP; ETC; (1 BASKET) (D-12) [Located at PLANT 8]

1968 LOT: HYDRAULIC PUMPS, (1 SKID); (D-12) [Located at PLANT 8]

1969 LOT: ASSTD TOOLS, (1 BOX); (D-12) [Located at PLANT 8]

1970 LOT: CYLINDERS, ETC; (3 SKIDS); (D-12) [Located at PLANT 8]

1971 10 H.P. PUMP, (D-12) [Located at PLANT 8]

1972 CYLINDER, (1 SKID); (D-12) [Located at PLANT 8]




- Page 69 -

1976 PARKER Qty (3) of CYLINDERS, (D-12) [Located at PLANT 8]

1977 LOT: ASSTD REPAIR PARTS, (1 SKID); (D-12) [Located at PLANT 8]

1978 LOT: PUMPS, ETC; (2 SKIDS); (D-12) [Located at PLANT 8]


1980 EMAG EXCHANGER, (E-12) [Located at PLANT 8]

1981 LOT: (3) ASSTD TRANSFORMERS, (2 SKIDS) (D-12) [Located at PLANT 8]

1982 VERTIFLO LOT: PUMP, MOTOR; PUMP; (2 SKIDS); (D-12) [Located at PLANT 8]

1983 SERVE LOT: MOTORS, (1 SKID); (D-12) [Located at PLANT 8]




1987 LOT: ASSTD CYLINDERS, (1 SKID); (D-12) [Located at PLANT 8]

1988 LOT: ASSTD CYLINDERS, (1 SKID); (D-12) [Located at PLANT 8]

1989 LOT: CYLINDERS, (2 SKID); (D-12) [Located at PLANT 8]

1990 CYLINDER, (1 SKID); (D-12) [Located at PLANT 8]

1991 LOT: CYLINDERS, PUMPS; ETC; (2 SKIDS) (C-10) [Located at PLANT 8]

1992 SANDEX INDEXING DRIVE, (D-12) [Located at PLANT 8]




1995.01 Qty (12) of INDUCTION COILS, (B-11) [Located at PLANT 8]

1996 LOT: ASSTD HOISTS, (1 BOX); (C-10) [Located at PLANT 8]


1998 LOT: MACHINE PARTS, TRANSFORMER; (2 SKIDS) (C-11) [Located at PLANT 8]






2004 LOT: ASSTD ELECTRICAL,ETC, (4 SKIDS); (C-12) [Located at PLANT 8]


2006 LOT: (3) ASSTD TRANSFORMERS, (C-12) [Located at PLANT 8]

2007 LOT: ASSTD REPAIR PARTS, (4 BOXES); (C-12) [Located at PLANT 8]

2008 LOT: ASSTD BEARINGS, SEALS; (1

- Page 70 -

SKID) (C-12) [Located at PLANT 8]2009 LOT: ASSTD REPAIR PARTS, (4

BOXES); (C-13) [Located at PLANT 8]




2013 LOT: ASSTD REPAIR PARTS, MOTORS; (5 SKIDS) (C-13) [Located at PLANT 8]

2014 LOT: ASSTD PUMPS, MOTOR; (2 SKIDS); (C-13) [Located at PLANT 8]

2015 LOT: SPLINE CUTTERS, (1 SKID); (C-13) [Located at PLANT 8]

2016 LOT: (10) ASSTD MOTORS, (4 SKIDS); (C-13) [Located at PLANT 8]

2017 LOT: VFLANGE 50 TAPER TAPPING HEADS, (C-13) [Located at PLANT 8]

2018 PANASONIC AAII 500 DIGITAL INTERFACE, (C-13) [Located at PLANT 8]

2019 LOT: ASSTD REPAIR PARTS, (3 SKIDS); (F-6) [Located at PLANT 8]










2029 SANDPIPER 3" PNEUMATIC TRASH PUMP, (Plt 8-1); Col# C-5, [Located at PLANT 8]

2030 SANDPIPER 3" PNEUMATIC TRASH PUMP, (Plt 8-1); Col# C-5, [Located at PLANT 8]

2031 GUSHER VERTICAL SHAFT COOLANT PUMP, 2" to 6"; (Plt 8-1); Col# C-5 [Located at PLANT 8]






2037 GUSHER VERTICAL SHAFT COOLANT PUMP, 2" to 6"; (Plt 8-1); Col

- Page 71 -

# C-5 [Located at PLANT 8]2038 KERR VERTICAL SHAFT PUMP, (Plt 8-

1); Col# C-5, [Located at PLANT 8]

2039 KERR VERTICAL SHAFT PUMP, (Plt 8-1); Col# C-5, [Located at PLANT 8]

2040 LOT: ASSTD CHAIN, BEARINGS; ETC.; (3 SKIDS); (H-6) [Located at PLANT 4]

2041 LOT: ASSTD REPAIR PARTS, (4 SKIDS); (H-6) [Located at PLANT 4]

2042 LOT: ASSTD ELECTRICAL, (2 SKIDS); (H-6) [Located at PLANT 4]


2044 LOT: ASSTD HAND TOOLS, (1 BOX); (H-6) [Located at PLANT 4]

2045 GUSHER 11022EX LONG PUMP, (H-7) [Located at PLANT 4]


2047 LOT: ASSTD REPAIR PARTS, ETC.; (4 SKIDS) (H-7) [Located at PLANT 4]

2048 LOT: ASSTD ELECTRICAL, ETC.; (3 SKIDS) (H-7) [Located at PLANT 4]

2049 LOT: CIRCUIT BOARDS, ETC; (1 SKID); (H-7) [Located at PLANT 4]

2050 LOT: CIRCUIT BOARDS, ETC; (2 SKIDS); (H-7) [Located at PLANT 4]


2052 LOT: ASSTD FILES,ETC, (1 SKIDS); (H-7) [Located at PLANT 4]


2054 LOT: DRILLS, ETC; (1 SKID); (H-7) [Located at PLANT 4]

2055 LOT: MIRRORS, (1 SKID); (H-7) [Located at PLANT 4]

2056 LOT: ASSTD ELECTRICAL, (1 SKID); (F-8) (H-8) [Located at PLANT 4]

2057 LOT: ASSTD SAFETY EQUIPMENT, ETC.; (2 SKIDS) (H-8) [Located at PLANT 4]

2058 WARNER Qty (3) of LINEAR ARMS, (H-8) [Located at PLANT 4]





2063 LOT: TEXAS INSTRUMENTS SEQUENCERS, (1 SKID) (H-8) [Located at PLANT 4]


2065 LOT: ASSTD ELECTRICAL, ETC.; (4 SKIDS) (H-8) [Located at PLANT 4]

2066 LOT: ASSTD HAND TOOLS, (1 SKID); (H-9) [Located at PLANT 4]


2068 LOT: ASSTD ELECTRONICS, (1 BOX); (H-9) [Located at PLANT 4]


2070 LOT: ASSTD ELECTRICAL, (1 SKID); (F-8) [Located at PLANT 4]

- Page 72 -

2071 LOT: ASSTD COPPER TUBING, (1 SKID); (F-8) [Located at PLANT 4]

2072 LOT: ASSTD REPAIR PARTS, (1 BOX); (F-8) [Located at PLANT 4]

2073 DELCO 7.5 ELECTRIC MOTOR, (E-8) [Located at PLANT 4]

2074 LOT: ASSTD REPAIR PARTS, ETC.; (2 SKIDS) (E-8) [Located at PLANT 4]


2076 LOT: ASSTD ELECTRICAL, (5 SKIDS); (F-7) [Located at PLANT 4]

2077 Qty (2) of BARREL CARTS, [Located at PLANT 4]

2078 LOT: ASSTD CYLINDERS, (1 SKID); (E-7) [Located at PLANT 4]



2081 LOT: WIRE PULLING LUBRICANT, (1 SKID) (F-7) [Located at PLANT 4]

2082 LOT: SAFETY KITS, (1 SKID); (F-7) [Located at PLANT 4]

2083 LOT: MISC., (2 SKIDS); (F-7) [Located at PLANT 4]

2084 LOT: BANDING UNIT & MIRRORS, (1 SKID) (E-7) [Located at PLANT 4]

2085 LOT: ASSTD HARDWARE, (1 SKID); (F-7) [Located at PLANT 4]

2086 LOT: ASSTD ABRASIVES, (1 SKID); (F-7) [Located at PLANT 4]

2087 LOT: ASSTD HAND TOOLS, (1 SKID); (F-7) [Located at PLANT 4]

2088 LOT: ASSTD ABRASIVES, (1 SKID); (F-7) [Located at PLANT 4]

2089 LOT: ASSTD REPAIR PARTS, (1 SKID); (F-7) [Located at PLANT 4]

2090 LOT: ASSTD ABRASIVES, (1 SKID); (E-7) [Located at PLANT 4]

2091 LOT: ASSTD HATS, VISORS; ETC.; (1 SKID) (F-6) [Located at PLANT 4]

2092 LOT: ASSTD ELECTRONICS, (1 SKID); (F-6) [Located at PLANT 4]

2093 LOT: RAKES, (1 BOX); (E-6) [Located at PLANT 4]


2095 LOT: ASSTD GRINDING WHEELS, (2 SKIDS) (F-6) [Located at PLANT 4]


2097 LOT: ASSTD BEARINGS, (1 BOX); (E-6) [Located at PLANT 4]

2098 UNITED OVER-UNDER SCALE, (G-5) [Located at PLANT 4]


2100 MOVIN COOL SPOT COOLING SYSTEM, (F-5) [Located at PLANT 4]





2105 LOT: ASSTD ELECTRICAL, (3 SKIDS);

- Page 73 -

(D-5) [Located at PLANT 4]2106 LOT: ASSTD ELECTRICAL, (3 SKIDS);

(D-5) [Located at PLANT 4]

2107 LOT: ASSTD SAFETY EQUIPMENT, ETC.; (4 SKIDS) (C-5) [Located at PLANT 4]

2108 ECONOLIFT 8,000 LB CAP LIFT & TILT TABLE, (E-20) [Located at PLANT 4]





2113 LOT: OFFICE CUBICLES & FURNITURE, (1ROOM) (E-5) [Located at PLANT 4]

2114 LOT: OFFICE FURNITURE, (1 ROOM); (E-5) [Located at PLANT 4]

2114.01 TOSHIBA 451C COPY MACHINE, S/N CF1511361 (IN UAW OFFICE) [Located at PLANT 4]



2117 TOSHIBA Qty (9) of MULTI-PURPOSE SYSTEMS, (E-16) [Located at PLANT 4]

2118 LOT: 12 ASSTD CONTROL CABINETS, (E-19) [Located at PLANT 4]

2119 LOT: ASSTD CHAIRS, (E-20) [Located at PLANT 4]

2120 Qty (2) of STEEL RACKS W/ STEEL, (C-22) [Located at PLANT 4]

2121 A.G. DAVIS CHECK GAUGE, With Check Mate Programmable Touch Screen Controllers; (Plt 3-5); Col# BB-13 [Located at PLANT 3]

2122 A.G. DAVIS CHECK GAUGE, With Check Mate Programmable Touch Screen Controllers; (Plt 3-5); Col# BB-13 [Located at PLANT 3]

2123 FANUC R-2000IA 165F ROBOT, (BB-13) [Located at PLANT 3]

2124 AIR FLOA B12-009 6,000 LB CAP PNEUMATIC LIFT & TILT TABLES, 54" X 60"; (BB-14) [Located at PLANT 3]

2125 AIR FLOA B12-009 6,000 LB CAP PNEUMATIC LIFT & TILT TABLES, 54" X 60"; (BB-14) [Located at PLANT 3]

2126 AIR GAGE, GAGE TABLE; (BB-13) [Located at PLANT 3]

2127 AIR GAGE, GAGE TABLE; (BB-14) [Located at PLANT 3]

2128 APPROX. 3000-GALLON ABOVE GROUND VERTICAL STAINLESS STEEL FLUID HOLDING TANK, Dimensions: 8' Diameter x 10' High; With; (2) Watlow 60,000 Watt 480 Volt 3-Phase Electric Heaters; Closed Top; 19" Ground Level Access Port; (Plt 3-5); Col# BB-14, [Located at PLANT 3]

- Page 74 -

2129 OMNI CONTROLS D16-30-3F-1-150-CBSB DUAL CANISTER COOLANT FILTERS, S/N NA; 150 PSI; (Plt 3-6); Col# BB-18 [Located at PLANT 3]

2130 MAYFRAN COOLANT FILTRATION TANK, S/N 08M3060; Tank Size 10' x 40" x 42"; 36" Wide Drag-Out Slat Conveyor; 7.4-HP Recirculation Pump; With Rosedale Products 4 Canister Filter Unit; (Plt 3-4); Col# E-6, [Located at PLANT 3]

2131 KJ LAW VERIMATION GAGE, BT 108335; (AA-13) [Located at PLANT 3]

2132 SHELLER Qty (5) of INDUCTION COILS, (AA-13) [Located at PLANT 3]

2133 GRACO LINE LAZER II WALK-BEHIND FLOOR STRIPPING MACHINE, S/N NA; Honda 5.5-HP Gas Powered Paint Pump; (Plt 3-3); Col# G-13, [Located at PLANT 3]

2134 HOBART ACCU-CHARGER 36 VOLT BATTERY CHARGER, (G-17) [Located at PLANT 3]
















2150 HOBART ACCU-CHARGER 36 VOLT BATTERY CHARGER, (G-17) [Located

- Page 75 -

at PLANT 3]2151 HOBART ACCU-CHARGER 36 VOLT

BATTERY CHARGER, (G-17) [Located at PLANT 3]



Documents

American Axle & Manufacturing (AA&M) - · PDF fileAmerican Axle & Manufacturing (AA&M) TIME : Nov 11, 2009 - Nov 12, 2009 10:00 AM LOCATION: 1840 Holbrook Ave ... 38.01 WHEEL BALANCER,