Upload
sshaffer9
View
225
Download
0
Embed Size (px)
Citation preview
8/7/2019 AMS - R&D - Reflow 2011
1/16
Vapor Phase Reflow Continues to Evolve .
Left to Right Product Flow
Lowest Delta Ts at PeakTemperature
Virtually O2 Free ReflowEnvironment
Superior Heat Transfer throughCondensation
Decreased Footprint WithoutDecreasing Output
Unsurpassed Uniformity
R&D Technical Services / Vapor Works12261 Nicollet Ave. S. Suite A Burnsville, MN 55337
Web: www.rdtechnicalservices.com ; Email: [email protected]
Phone: 952-707-1931
Inline Vapor PhaseModel RD52
Vapor Phase Reflow Systems fromR&D Technical Services offer:
AMS Materials LLC 866-7
72-5108
8/7/2019 AMS - R&D - Reflow 2011
2/16
Comparison of Heat Transfer MethodsPertains to both Reow and Rework
VAPOR PHASETECHNOLOGY
AMS Materials LLC 866-772-5108
8/7/2019 AMS - R&D - Reflow 2011
3/16
Typical InserFon of Board into Saturated Vapor Blanket
Benets Include: Be er Heat Transfer Through Condensa on; Unsurpassed Uniformity Acrossthe Product; Be er Solder WeJng; Lower Deltas at Peak Temp; Limit to MaximumTemperature; O2 Free Reow Environment ; Impervious to Density and Architecture.
AMS Materials LLC 866-772-5108
8/7/2019 AMS - R&D - Reflow 2011
4/16
Solder We ng
Proper weJng and ow of solder paste is also dependant on proper condi oning of the solderpaste before reow.
Vapor Phase from R&D Technical Services offer a superior solder reow process by combiningthe best characteris cs of both radiant/convec on prehea ng for op mum solder pastecondi oning prior to reow and vapor phase reow technology for excellent peak temperatureuniformity and repeatability. This improves weJng and reduces issues such as tombstoning,
head in pillow effect and voiding.
Typical Convected Zone
AMS Materials LLC 866-772-5108
8/7/2019 AMS - R&D - Reflow 2011
5/16
Component X-ray Comparison
Vapor Phase Reow Standard Reow
0201 0201
Solder voidingNo VoidingAMS Materials LLC 866-772-5108
8/7/2019 AMS - R&D - Reflow 2011
6/16
AMS Materials LLC 866-772-5108
8/7/2019 AMS - R&D - Reflow 2011
7/16
PRODUCT LINE
Reow
AMS Materials LLC 866-772-5108
8/7/2019 AMS - R&D - Reflow 2011
8/16
Batch Systems
RD1 RD2
RD3
AMS Materials LLC 866-772-5108
8/7/2019 AMS - R&D - Reflow 2011
9/16
8/7/2019 AMS - R&D - Reflow 2011
10/16
RD10: High quality Vapor Phaseperformance in a Belted Inlineapplica on with Le to right ow.
Fully Automa c Inline Opera on10 or 8 Belt Width
Recipe StorageFluid Filtra onPreheatCooldown
The RD10 is ideally suited formechanical a achment and high volume
heat transfer applica ons.
RD52: The RD52 is an inline vapor phasesystem featuring le to right product ow.
15 x 18 Working EnvelopeAdjustable Pin Chain Conveyors4 Zone PreheatHorizontal Reow Posi onSMEMA Interface250 Recipe StorageFluid Filtra on3 Level Password Protec onConvected Post Reow Cooldown
The RD52 vapor phase reow oven is Perfectfor higher volume produc on and inline
processing.
Inline Systems
AMS Materials LLC 866-772-5108
8/7/2019 AMS - R&D - Reflow 2011
11/16
250 Programmable Recipes
9 Character Alpha Numeric Recipe Names
3 Level Password Protec on
6- 10 Graphic Touch Screen OperatorInterface
Full Safety Controls
Maintenance Control Screen
Individual Preheat Zone Control
Control Head
Controls
AMS Materials LLC 866-772-5108
8/7/2019 AMS - R&D - Reflow 2011
12/16
New Product Offerings or Large Panel Sizesfrom
R&D Technical Services
AMS Materials LLC 866-772-5108
8/7/2019 AMS - R&D - Reflow 2011
13/16
RDB-25Batch/Inline Vapor Phase
Le to Right Product Flow
21 x 25 Working Envelope
2.5 - 4 of Top Side Clearance
250 Programmable Recipes
3 Level Password Protec on
Top and Bo om Convec on Cooling
Fluid Filtra on System
Convected Preheat
SMEMA Compa ble
AMS Materials LLC 866-772-5108
8/7/2019 AMS - R&D - Reflow 2011
14/16
RD53 Inline Vapor Phase
eatures: 21 x 24 x 2 working envelopeplus all the same features as the current model RD52
Approximate Cost: $185,000.00
AMS Materials LLC 866-772-5108
8/7/2019 AMS - R&D - Reflow 2011
15/16
Advantages
Uniform Heat Transfer Via Condensa on
Unaffected by Shadowing or Deec on
Absolute Limits to Maximum Reow Temperature
Closed Loop Vapor System
O2 Free at Reow
Impossible to Overheat IC
Perfect for Large BGA Rework and Challenging First A ach
AMS Materials LLC 866-772-5108
8/7/2019 AMS - R&D - Reflow 2011
16/16
R&D Technical Services / Vapor Works R&D Technical Services / Vapor Works is building the nest vapor phase reow and
rework machines in the world. We con nually lead in innova on as shown by therst true vapor phase inline system the RD52 and the ground breaking rst of itskind V-Works 24 vapor phase rework sta on.
We are not the biggest, just simply the best. Weve made our reputa on onhonesty, hard work, and innova ve solu ons to real life problems. Every change
we make to our systems evolves from direct conversa ons with our customer base.We design equipment with value and reliability and long equipment life. We areyour one stop vapor phase solu on.
12261 Nicollet Ave. S. Suite A Burnsville, MN 55337 www.rdtechnicalservices.com Ph: 952-707-1931; fax: 952-707-6739
AMS Materials LLC 866-772-5108