Upload
yadid
View
36
Download
3
Tags:
Embed Size (px)
DESCRIPTION
An SP76 Carrier Gas Manifold Design For a Process GC. ABB Process Analytics Tracy Dye Parker Hannifin Steve Doe. The Problem. Multiple stacked oven design restricts access from above Carrier gas manifold needed to be serviced from the front - PowerPoint PPT Presentation
Citation preview
Oil, Gas & Petrochemicals
CementChemicals Metals &Minerals
Life SciencesUtilityAutomotive
An SP76 Carrier Gas Manifold Design For a Process GC
ABB Process Analytics
Tracy Dye
Parker Hannifin
Steve Doe
The Problem
Multiple stacked oven design restricts access from above Carrier gas manifold needed to be serviced from the front
Bent tubing runs required for traditional manifold design Labor intensive
Non-standard design, higher engineering costs
The Solution
Carrier gas and purge air regulators of SP76 design
Modular manifold that scales from 1 to 5 zones
The Results
From this …Multiple bent tubing runs
Multiple make-and-break fittings
• Multiple potential leak points
• Service access to regulators and gauges from above
• High labor and material content
• Non-standard engineering design
The Results
To this …
• Fewer potential leak points
• Easy access to regulators and gauges from the front
• Low labor (no tube bends), less tubing
• Standard, modular engineering design
Straight, pre-fab tube runs
Fewer make-and-break fittings
SP76 Carrier Gas and Purge Manifold Design
SP76 Carrier Gas and Purge Manifold Design
Access to the regulators and gauges from the top is not required
Regulators and gauges are serviceable from the front