Upload
theta
View
228
Download
7
Tags:
Embed Size (px)
DESCRIPTION
Analytical figures of merit, noise, and S/N ratio. Chemistry 243. Noise. A signal is only of analytical value if it can be definitively attributed to the species/system of interest in the presence of noise . Probably noise, or not very useful; a hint of a signal. Looks like a real signal. - PowerPoint PPT Presentation
Citation preview
Analytical figures of merit, noise, and S/N ratio
Chemistry 243
Noise A signal is only of analytical value if it can be
definitively attributed to the species/system of interest in the presence of noise.
0.5
1
1.5
2
2.5
0 20 40 60 80 100
data point
sign
al
0.5
1
1.5
2
2.5
0 20 40 60 80 100
data point
sign
al
Looks like a real signalProbably noise, or not very useful;
a hint of a signal
What is signal and noise?
Signal-to-Noise Ratio (S/N) Signal-to-noise ratio (S/N) is a measure of the
quality of an instrumental measurement Ratio of the mean of the analyte signal to the
standard deviation of the noise signal High value of S/N : easier to distinguish analyte
signal from the noise signal
1
xSN s
SN RSD
Rev. Sci. Inst., 1966, 37, 93-102.
MostlySignal
MostlyNoise
signal
Std. Dev.
Where does noise come from? Chemical noise
Temperature, pressure, humidity, fumes, etc. Instrumental noise
Detector and post-detector noise Thermal (Johnson) noise Shot noise Flicker (1/f) noise Environmental noise Popcorn (burst) noise Microphonic noise
Thermal (Johnson) noise Random motions of charge carriers
(electrons or holes) that accompany thermal motions of solid lattice of atoms.
Lead to thermal current fluctuations that create voltage fluctuations in the presence of a resistive element Resistor, capacitor, etc.
4rms kTR f
rms = root-mean-square noise voltagek = Boltzman’s constantT = temperature
R = resistance of element (W)f = bandwith (Hz) = 1/(3tr)tr = rise time
Thermal (Johnson) noise continued Dependent upon bandwidth (f) but not f itself
white noise Can be reduced by narrowing bandwidth
Slows instrument response time More time required for measurement
Reduced by lowering T Common to cool detectors
298K77K lowers thermal noise by factor of ~2
4rms kTR f
rms = root-mean-square noise voltagek = Boltzman’s constantT = temperature
R = resistance of element (W)f = bandwith (Hz) = 1/(3tr)tr = rise time
N2(l): bp=77K
Shot noise Arises from statistical fluctuations in
quantized behaviors Electrons crossing junctions or surfaces
Independent of frequency Example: current
10.5 e-/s
10 e-/s
11 e-/s
2rmsi Ie f irms = root-mean-square noise currentI = average direct currente = electron chargef = bandwidth (Hz)
Flicker (1/f) noise Magnitude is inversely proportional to the
frequency of the signal Significant at frequencies lower than 100 Hz
Long-term drift Origin is not well understood
Dependent upon materials and device shape Metallic resistors have 10-fold less flicker noise than
carbon-based resistors. Referred to as “pink” noise—more red (low
frequency) components
Environmental noise Comes from the surroundings Biggest source is “antenna” effect of
instrument cabling
J. Chem. Educ., 1968, 45, A533-542.
Noise contributions in different frequency regimes
Frequency independent
Supposedly 1/f—mostly at low frequencies
Occurs at discrete frequencies
Enhancing signal-to-noise Hardware methods
Grounding and shielding Difference and Instrumentation Amplifiers Analog Filtering Lock-In Amplifiers
Modulation and Synchronous Demodulation
Software methods Ensemble averaging Boxcar averaging Digital filtering Correlation methods
Grounding and shielding Surround circuits (most critical conductors)
with conducting material that is connected to ground Noise will be picked up by shield and not by
circuit Faraday cage
http://www.autom8.com/images_product/table_farady_benchtop.jpghttp://farm2.static.flickr.com/1227/578199978_17e8133c7c_o.jpg
Analog filtering Low pass filter removes
high frequency noise Thermal and shot noise
High pass filter removes low frequency noise Drift and flicker noise
Narrow-band electronic filters
Example of low-pass filter
High freq removed.Low freq preserved
(passed).
Lock-in amplifiers Modulation
Translate low frequency signal (prone to 1/f noise) to a high frequency signal which can amplified and then filtered to remove 1/f noise
Mechanical chopper
Lock-in amplifierscontinued Synchronous demodulation
Converts AC signal to DC signal synchronous with chopper—follows reference
Low-pass filtering Back converts high frequency DC signal to return filtered,
low frequency output.
Ensemble averaging to increase S/N Averaging multiple
data sets taken in succession Divide sum of data
sets by number of data sets
1
n
ii
x
SS
n
J. Chem. Educ., 1979, 56, 148-153.
Ensemble averagingcontinued Signal-to-noise improves with increasing
number of data sets
n i
S SnN N
N = rms noise n = number of replicate scansi = number of replicate scans in other data set
# Scans, n Relative S/N
1 1 4 216 464 8
Boxcar averaging Smoothing irregularities and increasing S/N Assumes signal varies slowly in time Multiple points are averaged to give a single
value Often performed in real time Detail is lost and utility limited for rapidly
changing samples Boxcar integrators commonly used in fast
(pico- to microsecond) measurements using pulsed lasers.
Moving average smooth Similar to a boxcar average, but changes in time
0 200 400 600 800 1000
data point
sig
nal
(arb
uni
ts)
Average Standard Deviation
S/N Relative S/N
Original 100.2 6.0 16.6 1
4 point 100.2 3.0 33.4 2.0
16 point 100.2 1.5 67.1 4.0
100 point
100.2 0.6 160 9.7
Downside of moving average smoothing
50
60
70
80
90
100
110
120
130
140
0 200 400 600 800 1000
sign
al(a
rb u
nits
)
data point
Digital filtering Fourier transform
Convert data from time- to frequency-domain, manipulate to remove higher frequency noise components, regenerate time-domain signal
Polynomial data smoothing Moving average smooth Least-squares polynomial smoothing