Anchor B&S 2006 · PDF fileAnchor Bolt and Screw is one of the largest manufacturers and distributors of high quality fasteners. For over 50 years, Anchor Bolt and Screw has

ANCHOR HISTORY

Since the summer of 1952, Anchor Bolt & Screw

Company has been a leading supplier of customer

solutions. Through our continued research into new and

innovative technologies, Anchor has been able to develop

products designed for the specific applications of our

customers. In turn, this has helped our customers cut

costs through reduced installation time and increased

manufacturing efficiencies. Anchor has one of the

broadest product lines supplied by any manufacturer

or distributor.

Anchor Bolt & Screw Company prides itself on its

outstanding quality, delivery performance, innovative

inventory management, and specifically designed VMI or

other special inventory programs.

Anchor Bolt & Screw Company is a leader in the

custom manufacturing industry. Many products we have

developed have become industry standards. Anchor has

an extremely strong distributor following, and is an active

member of MWFA, IFI, NFDA, NTEA, STAFDA, TMA,

and TMC.

To augment our strong manufacturing capabilities, our

extensive Master Distributor system can supply a wide

range of products that require the use of multiple vendors.

With the long-term relationships we have developed with

our customers and key proprietary lines, we have been

able to secure such lines as Avdel/Cherry, Heyco, Indux,

ITW/Fastex, Magna, Marson, Richco, Tinnerman, Oetiker,

and Recoil just to mention a few.

Looking at our entire product offering, coupled with our

extensive product and application knowledge, we can

service any requirement you may have.

Toll Free (800) 227-4748

Fax (708) 343-7965

www.anchor-bolt.com

ANCHORB O LT & S C R E W C O M P A N Y

I S O 9 0 0 1 C E R T I F I E DSince December 3, 1999, Anchor Bolt &

Screw Company has been ISO 9001

Certified. This is a true testament to

Anchor’s ongoing devotion to bringing

quality product to its customers.

Anchor Bolt and Screw is one

of the largest manufacturers

and distributors of high quality

fasteners. For over 50 years,

Anchor Bolt and Screw has

been designing, manufacturing,

and supplying you with all

your fastener needs.

Welcome to Anchor Bolt & Screw

MISSION STATEMENT

To be the premier provider

of manufactured, imported

or distributed product lines

to the global market to be

accomplished through the

highest level of quality products

provided at the highest level

of customer service.

ORDERING INFORMATION

Order Placement Toll Free: 800-227-4748

Phone: 708-681-2100

Fax: 708-343-7965

E-mail: [email protected]

Mailing Address Anchor Bolt and Screw Co.

2001 N. Cornell Avenue

Melrose Park, Illinois 60160

As of the first quarter of 2007:

Anchor Bolt and Screw Co.

1560 Frontenac Road

Suite 164

Naperville, Illinois 60563

In order to make your ordering process smoother,

please provide:- Application information

- Quantity/Usage

- Dimensions and/or print

Terms - Net 30 Days

- All shipments F.O.B. our location

Your Quality Fastener Source!

1 ANCHOR ISO 9001 CERTIFIEDBOLT & SCREW COMPANY

CAN’T FIND WHAT YOU’RE LOOKING FOR? Call Toll Free 1.800.227.4748

Our international sourcing experts will find it for you.

ANCHORB O LT & S C R E W C O M P A N Y

ISO 9001 CERTIFIED ANCHORBOLT & SCREW COMPANY

VISIT US ATwww.anchor-bolt.com

2

TABLE OF CONTENTS

Domestic Manufacturing . . . . . . . . . . . . . . . . . .3

Direct Import . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Part Number Instruction Page . . . . . . . . . . . . . 5Drive Style Codes . . . . . . . . . . . . . . . . . . . . . 6Head Style Codes . . . . . . . . . . . . . . . . . . . . . 6Material Codes . . . . . . . . . . . . . . . . . . . . . . . 7Finish Codes . . . . . . . . . . . . . . . . . . . . . . . . . 7Colors (Polymers) . . . . . . . . . . . . . . . . . . . . . 7Locking Feature Code . . . . . . . . . . . . . . . . . 7

Sheet Metal Screws . . . . . . . . . . . . . . . . . . . . . . 8Type A Point . . . . . . . . . . . . . . . . . . . . . . . . . 8Type AB Point . . . . . . . . . . . . . . . . . . . . . . . . 8Type B Point . . . . . . . . . . . . . . . . . . . . . . . . . 9Type BP Point . . . . . . . . . . . . . . . . . . . . . . . . 9

Thread Cutting Screws . . . . . . . . . . . . . . . . . . 10Type BF Point . . . . . . . . . . . . . . . . . . . . . . . 10Type 25 (BT) Point . . . . . . . . . . . . . . . . . . . 10Type 23 Point . . . . . . . . . . . . . . . . . . . . . . . 11Type 1 Point . . . . . . . . . . . . . . . . . . . . . . . . 11Type 17 Point . . . . . . . . . . . . . . . . . . . . . . . 12Type F Point . . . . . . . . . . . . . . . . . . . . . . . . 12

Thread Forming Screws . . . . . . . . . . . . . . . . . 13Tapform . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Single Lead Tri-Point . . . . . . . . . . . . . . . . . . 13Double Lead Tri-Point . . . . . . . . . . . . . . . . . 14Tapform 3 . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Machine Screws . . . . . . . . . . . . . . . . . . . . . . . . 15Fine Thread . . . . . . . . . . . . . . . . . . . . . . . . . 15Coarse Thread . . . . . . . . . . . . . . . . . . . . . . 15

Plastic Application Screws . . . . . . . . . . . . . . 16Plaston™ . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Plaston II™ . . . . . . . . . . . . . . . . . . . . . . . . . 16

Self Drilling Screw Type BSD . . . . . . . . . . . . . 17#2 Point BSD . . . . . . . . . . . . . . . . . . . . . . . . 17#3 Point BSD . . . . . . . . . . . . . . . . . . . . . . . . 17

Self Drilling Screw Type CSD . . . . . . . . . . . . . 18#2 Point CSD . . . . . . . . . . . . . . . . . . . . . . . 18#3 Point CSD . . . . . . . . . . . . . . . . . . . . . . . 18

FRP Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Carriage Bolts . . . . . . . . . . . . . . . . . . . . . . . . . 20.250 Rib Neck . . . . . . . . . . . . . . . . . . . . . . . 20.407 Rib Neck . . . . . . . . . . . . . . . . . . . . . . . 20.594 Rib Neck . . . . . . . . . . . . . . . . . . . . . . . 21Regular Square Neck . . . . . . . . . . . . . . . . . 21Short Square Neck . . . . . . . . . . . . . . . . . . . 222 Fin Neck . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Fin Neck . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Bottom Rail Bolts . . . . . . . . . . . . . . . . . . . . . . 24

Structural Bolts . . . . . . . . . . . . . . . . . . . . . . . . 25

Floor Board Screws . . . . . . . . . . . . . . . . . . . . . 26Standard Floor Screw . . . . . . . . . . . . . . . . .26Premium Floor Screw . . . . . . . . . . . . . . . . .26

Anchor-Lok Fastening System . . . . . . . . . . . 27Identification Key . . . . . . . . . . . . . . . . . . . . .27Grip Data . . . . . . . . . . . . . . . . . . . . . . . . . . .28

ABM Panelok™ . . . . . . . . . . . . . . . . . . . . . . . . 29ABM Panelok™ Bolt . . . . . . . . . . . . . . . . . .29ABM Panelok™ T-Nut . . . . . . . . . . . . . . . . .29

Anchor Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Threaded Rod . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Concrete Screws . . . . . . . . . . . . . . . . . . . . . . . 31

Concrete Anchors . . . . . . . . . . . . . . . . . . . . . . 31

Pipes & Fittings . . . . . . . . . . . . . . . . . . . . . . . . 32

Struts & Accessories . . . . . . . . . . . . . . . . . . . 32

Distributor Lines . . . . . . . . . . . . . . . . . . . . . . . 33Avdel Cherry Textron . . . . . . . . . . . . . . . . . 34Heyco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35ITW Fastex . . . . . . . . . . . . . . . . . . . . . . . . . 36Indux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Magna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Marson . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Richco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Tinnerman Palnut . . . . . . . . . . . . . . . . . . . . 41Oetiker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Recoil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Value Added Services . . . . . . . . . . . . . . . . . . . 44




Domestic Manufacturing

Capabilities

- Multiple blow cold heading machines.

- Up to 6" in length.

- Multiple platings available.

- From #4 up to 1/2" diameter

- Multiple thread lengths and styles available.

Custom Specials

Save assembly time while lowering costs with

special parts and fasteners. Anchor offers reduced

lead times on specials. We virtually eliminate

secondaries while increasing your ability to specify

parts with extreme size differences; large heads,

small shanks, rimmed shapes and more.

Engineering Support

Anchor’s experienced and trained engineers are

available to help you with most fastener designs you

may need. Our engineers can either work with your

drawings, or can help to design them with you.

Quality Control

For almost 50 years, Anchor Bolt and Screw Company

has taken pride in its quality control. Anchor not only

offers quality parts, it provides excellent service as

well. Anchor continuously works to maintain its place

as an industry leader in quality.

Tooling

With a tooling department in-house, your tooling can

be done quickly and easily to IFI or your standards.

TORX®

TORX® Drive System

This innovative fastener drive system was developed

to overcome limitations of hex, Phillips, square, and

other drive systems.

- Enlarged window of engagement.

- Laboratory testing shows 100% engagement

at 700 rpm.

- For fastener sizes M3 to M16 (#3 to 1/ 2")

- Compound angle guide ramps at each lobe.

- Self-centering and engaging installation on the

production action during fastener reengagement.

- Quicker engagement of recess to reduce

assembly time.

- Ideal for automated or reassembly conditions.

TORX® plus Drive System

Stronger and more versatile, TorxPlus® drive system

further improves tool life and performance while

improving worker productivity and reducing fatigue.

- Larger cross section at the lobes.

- Fully compatible with existing TORX® drive

system tools.

- 50% reduction in drive tool tolerance.

- 25% average improvement in driver bit

torsional strength.

- Engineered elliptical geometric configuration.

- Can be used with fastener diameters from M0.6 to

M24 ( #000 to 1" )

- True 0° drive angle to eliminate radial forces.

- 100% average improvement driver bit life.

- Reduces assembly line downtime; improves reliability.

- Improved fit between tool & fastener recess

- Higher torque transfer capability

- Reduces camout and end load.

- Reduces worker fatigue.

TORX® Tamper-Resistant

This unique globe elliptical geometry TORX® drive

system variation incorporates a solid post formed in

the center of the recess during the heading process.

When combined with a countersunk or bottom head

design. It makes the fastener extremely difficult to

remove without a special Tamper-Resistant TORX®

drive system tool Unlike some other tamper-resistant

fasteners, installation on the production line is quick

and easy with the proper tool.

Anchor Bolt and Screw Company is a

Licensed Torx® Manufacturer

Torx®,TorxPlus®,Torx® Tamper-Resistant are registered

trademarks of Camcar-Textron

Direct Import

Anchor Bolt & Screw Co. has leveraged the

capabilities of the world to supply our customers

with the best possible product at a value level

they demand.

We have built strong relationships with various

vendors spanning 5 continents. To enable us the

ability to confidently supply you with the quality

you have come to expect from Anchor Bolt &

Screw Co. our trained staff have performed

on site audits of procedures and product

with our overseas partners.

The advantage to having Anchor

Bolt & Screw Co.manage your

import needs is the knowledge

that you are consistently

receiving quality product

in the manner you wish

to receive it. We are

continually working with

our partners to continue

this high level of quality

and service.

If you have a custom order which requires

import pricing, we will conduct the research

and development domestically with our

manufacturing capabilities and then send it

overseas. This allows us to answer, first hand,

any question which may arise as a result of

production. This will result in a much faster

turn around on custom import items.



4

Part Numbering Instruction Page

If you have any further questions or require a better

explanation, please feel free to contact one of our

thoroughly trained sales professionals.

The "base item" number can be found in the tables

which follow. The Drive Type, Head Style, Raw

Material and Finish coding can be found the next

2 pages.

XXXXX-X-X-XX-XX

BaseItem

DriveType

HeadStyle

RawMaterial

Finish




Product Code Abbreviations

DRIVE STYLES

0 NOT APPLICABLE

6 6 LOBE

E EXTERNAL TORX

5 ENCAPSULATED FRP BOLT HEAD

4 FRP BOLT HEAD

H HEX

K HEX SOCKET

I INDENTED HEX

D INDENTED HEX SLOTTED

P PHILLIPS

C PHILLIPS/SLOT COMBO

Z POZIDRIVE

L CLUTCH

S SLOTTED

N SPANNER

8 SPLINE

Q SQUARE

X TORX

1 TORX PLUS

Y TORX TAMPER RESISTANT

W TRI-WING

U UNINDENTED HEX

9 SPECIAL

HEAD STYLES

0 NOT APPLICABLE

U BUGLE HEAD

B BUTTON

5 ENCAPSULATED FRP BOLT HEAD

4 FRP BOLT HEAD

G FLANGE HEAD

F FLAT

L FILLISTER

K HEX SOCKET

W HEX WASHER

S HEX WASHER SLOTTED

I INDENTED HEX

D INDENTED HEX SLOTTED

P PAN

V OVAL

C OVAL UNDERCUT

R ROUND HEAD

E SERRATED HEX WASHER

T TRUSS

A WAFER HEAD

H WASHER HEAD

9 SPECIAL



6

Bugle Button EncapsulatedFRP Bolt

Fillister Flange Flat

FRP Hex Head Hex Socket Hex Washer Hex WasherIndented

Oval OvalUndercut

Pan Round

Under CutFlat

Under CutOval Wafer

WaferSerrated

Hex HeadSlotted

Hex WasherSerrated

Hex WasherSlotted

Truss TrussUndercut

Product Code Abbreviations

MATERIAL CODES

AL ALUMINUM

BT BORON STEEL

BR BRASS

CP COPPER

NY NYLON

PL PLASTIC

SB SILICONE BRONZE

SS STAINLESS STEEL

ST STEEL

TE TEFLON

FINISH CODES

00 PLAIN

D0 CADMIUM FINISH

DC CADMIUM CLEAR CHROMATE

DY CADMIUM YELLOW CHROMATE

ZC ZINC FINISH

Z2 .0002 ZINC FINISH



ZY ZINC YELLOW CHROMATE

ZB ZINC BLACK

ZA ZINC BLUE

RC ZINC FINISH TRIVALENT CLEARCHROMATE (RoHS COMPLIANT)

R2 .0002 ZINC FINISH (RoHS COMPLIANT)



RY ZINC FINISH TRIVALENT YELLOWCHROMATE (RoHS COMPLIANT)

FINISH CODES (CONTINUED)

K1 NICKEL FINISH

T1 DACROMET 320

TA DICRHOMAX 3000

PH PHOSPHATE FINISH

PO PHOSPHATE AND OIL 72

BD BRIGHT DIP

C1 CHROME BRIGHT

C2 CHROME SATIN

AN ANNEAL

PV PASSIVATE

ET ELECTRO TIN

IC IRIDITE CLEAR

IG IRIDITE GREEN

BO BLACK OXIDE

HG HOT DIP GALVANIZED

MG MECHANICALLY GALVANIZED

LO LIGHT OIL

COLOR (POLYMERS ONLY)

GR GREEN

BL BLUE

BK BLACK

NT NATURAL

WH WHITE

RD RED

YW YELLOW

LOCKING FEATURE

PLEASE ADD SUFFIX OF "L" FOR APPLIEDLOCKING FEATURE

**OTHER MATERIALS AND FINISHES MAY BE AVAILABLE




Sheet Metal ScrewsS

CR

EW

S

Type A Point – These items have coarse threads and a gimlet style point. Used for thin metal, resin impregnated plywood,and asbestos composites.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4 13002 13003 **

5 13005 13006 13007

6 13009 13010 13011 13012

8 13014 13015 13016 13017 13018 13019

10 13022 13023 13024 13025 13026 13027

12 13030 13031 13032 13033 13034 13035 13036

14 13039 13040 13041 13042 13043 13044 13045

16 13046 13047 13048 13049 13050 13051 13052 13053 **

18 13054 13055 13056 13057 13058 13059 13060 **

20 13061 13062 13063 13064 13065 13066 13067 **

1/2

Type AB Point – These items have spaced threads (same pitch as type B) and a gimlet point. Used for thin metal,resin impregnated plywood, and asbestos composites.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4 13068 13069 ** ** **

5 13071 13072 13073 ** **

6 13075 13076 13077 13078 13079 13080 ** **

8 13082 13083 13084 13085 13086 13087 13088 13089 **

10 13092 13093 13094 13095 13096 13097 13098 13099 13100 **

12 13103 13104 13105 13106 13107 13108 13109 13110 13111 **

14

1/4 13112 13113 13114 13115 13116 13117 13118 13119 13120 ** **

5/16 ** 13121 13122 13123 13124 13125 13126 13127 13128 ** **

3/8 13129 13130 13131 13132 13133 13134 13135 13136 ** **

1/2

** Denotes item available upon request Longer lengths and larger diameters may be available upon request


This product type falls under the

product family of a Self Tapping

Screw. This family of product has

traditionally been used to hold thin sheet metal together. They may

also be used in wood applications and in some cases in plastic

drywall anchors.



8

Numbers in tables are Base Items.Please refer to page 5

Type BP Point

This style of Sheet Metal Screw will have a thread style similar to a

Type B however the point will be conical extending beyond the

incomplete entrance threads. Used for piercing fabrics or in assem-

blies where there may be misaligned holes. Available upon Request

Sheet Metal ScrewsS

CR

EW

S

Type B Point – These items have spaced threads and a blunt point with incomplete entrance threads. Used for thin metal,nonferrous castings, plastics, resin impregnated plywood, and asbestos composites.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4 13137 13138 13139 ** ** **

5 13140 13141 13142 13143 ** **

6 13144 13145 13146 13147 13148 13149 13150 ** **

8 13151 13152 13153 13154 13155 13156 13157 13158 13159 **

10 13160 13161 13162 13163 13164 13165 13166 13167 13168 13169 13170 **

12 13171 13172 13173 13174 13175 13176 13177 13178 13179 13180 13181 **

14

1/4 13182 13183 13184 13185 13186 13187 13188 13189 13190 ** **

5/16 ** 13191 13192 13193 13194 13195 13196 13197 13198 ** **

3/8 13199 13200 13201 13202 13203 13204 13205 13206 ** **

1/2


This product type falls under the

product family of a Self Tapping

Screw. This family of product has

traditionally been used to hold thin sheet metal together. They may

also be used in wood applications and in some cases in plastic

drywall anchors.

notes





Thread Cutting ScrewsS

CR

EW

S

Type BF Point – This style of screw has spaced threads with a blunt point and tapered entering threads.It will also have one or more cutting edges and chip cavities. Used for plastics, asbestos or similar compositions.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4 ** **

5 11003 11004 ** **

6 11007 11008 11009 11010 11011 ** **

8 11014 11015 11016 11017 11018 11019 11020 **

10 11023 11024 11025 11026 11027 11028 11029 11030 ** **

12 11033 11034 11035 11036 11037 11038 11039 11040 ** **

14

1/4 11041 11042 11043 11044 11045 11046 11047 11048 11049 ** **

5/16 ** 11050 11051 11052 11053 11054 11055 11056 11057 ** **

3/8 11058 11059 11060 11061 11062 11063 11064 11065 ** **

1/2


Type 25 Point (Type BT) – The type 25 has spaced threads with a blunt point and tapered entering threads.It will also have a shank slot. Used for plastics, asbestos or similar compositions.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4 11067 11068

5 11070 11071

6 11073 11074 11075 11076 11077 11078 11079 11080 **

8 11082 11083 11084 11085 11086 11087 11088 11089 **

10 11092 11093 11094 11095 11096 11097 11098 11099 **

12 11102 11103 11104 11105 11106 11107 11108 11109 **

14

1/4 11110 11111 11112 11113 11114 11115 11116 11117 **

5/16 ** 11118 11119 11120 11121 11122 11123 11124 11125 11126 **

3/8 11127 11128 11129 11130 11131 11132 11133 11134 11135 **

1/2


This family of product is used

when a minimum amount of

disruptive stress inside the material

is required. This family may also be substituted when excessive

driving torque has been encountered with thread forming screws.



10


Thread Cutting ScrewsS

CR

EW

S

Type 23 – The Type 23 will have a thread style and pitch of a machine screw.They will also have a blunt point with tapering entrancethreads and a shank slot. Used in aluminum, zinc, lead die castings, steel sheets and shapes, cast iron, brass, and plastics.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4 11137 11138

5 11140 11141

6 11143 11144 11145 11146 11147 11148 11149 11150 **

8 11153 11154 11155 11156 11157 11158 11159 **

10 11162 11163 11164 11165 11166 11167 11168 11169 **

12 11172 11173 11174 11175 11176 11177 11178 11179 **

14

1/4 11180 11181 11182 11183 11184 11185 11186 11187 **

5/16 ** 11188 11189 11190 11191 11192 11193 11194 11195 11196 **

3/8 11197 11198 11199 11200 11201 11202 11203 11204 11205 **

1/2


Type 1 – The Type 1 will have a thread style and pitch of a machine screw.They will also have a blunt point with tapering entrancethreads and cutting flutes. Used in aluminum, zinc, lead die castings, steel sheets and shapes, cast iron, brass, and plastics.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4 11207 11208

5 11210 11211

6 11213 11214 11215 11216 11217 11218 11219 11220 **

8 11222 11223 11224 11225 11226 11227 11228 11229 **

10 11232 11233 11234 11235 11236 11237 11238 11239 **

12 11242 11243 11244 11245 11246 11247 11248 11249 **

14

1/4 11250 11251 11252 11253 11254 11255 11256 11257 11258

5/16 ** 11259 11260 11261 11262 11263 11264 11265 11266 11267 **

3/8 11268 11269 11270 11271 11272 11273 11274 11275 11276 **

1/2



when a minimum amount of

disruptive stress inside the material

is required. This family may also be substituted when excessive






Type 17 – This product is a thread forming screw for wood with a coarse thread tap and a gimlet point with a shank slot.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4 11278 11279

5 11281 11282

6 11284 11285 11286 11287 11288 11289 11290 11291 11292

8 11295 11296 11297 11298 11299 11300 11301 11302

10 11305 11306 11307 11308 11309 11310 11311 11312 11313

12 11316 11317 11318 11319 11320 11321 11322 11323 11324

14

1/4 11325 11326 11327 11328 11329 11330 11331 11332 11333

5/16 ** 11334 11335 11336 11337 11338 11339 11340 11341 11342 **

3/8 11343 11344 11345 11346 11347 11348 11349 11350 11351 **

1/2

SC

RE

WS

Thread Cutting Screws


Type F – The Type F will have a thread style and pitch of a machine screw.They will also have a blunt point with tapering entrancethreads and multiple cutting flutes. Used in aluminum, zinc, lead die castings, steel sheets and shapes, cast iron, brass, and plastics.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4 ** ** ** **

5 11353 11354 11355 ** **

6 11357 11358 11359 11360 11361 11362 ** **

8 11364 11365 11366 11367 11368 11369 11370 11371 **

10 11373 11374 11375 11376 11378 11379 11380 11381 11382 **

12 11384 11385 11386 11387 11388 11389 11390 11391 11392 **

14

1/4 11393 11394 11395 11396 11397 11398 11399 11400 11401 11402 11403

5/16 ** 11404 11405 11406 11407 11408 11409 11410 11411 11412 11413

3/8 11414 11415 11416 11417 11418 11419 11420 11421 11422 11423

1/2


This family of product is used when

a minimum amount of disruptive

stress inside the material is

required. This family may also be substituted when excessive




12


Thread Forming ScrewsS

CR

EW

S

Tapform – This thread forming screw has a quad point for maximum thread forming performance.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4 ** **

5 12003 12004 ** **

6 12007 12008 12009 12010 12011 ** **

8 12014 12015 12016 12017 12018 12019 12020 **

10 12023 12024 12025 12026 12027 12028 12029 12030 **

12 12033 12034 12035 12036 12037 12038 12039 12040 **

14

1/4 12042 12043 12044 12045 12046 12047 12048 12049 12050 12051

5/16 12052 12053 12054 12055 12056 12057 12058 12059 12060 12061

3/8 12062 12063 12064 12065 12066 12067 12068 12069 12070 12071

1/2


Single Lead Tri-Point – This style of thread forming screw has a tri lobular point and a single lead helical thread pattern.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4

5 12075 ** **

6 12078 12079 12080 12081 12082 ** **

8 12085 12086 12087 12088 12089 12090 12091 **

10 12094 12095 12096 12097 12098 12099 12100 12101 **

12 12104 12105 12106 12107 12108 12109 12110 12111 **

14

1/4 12112 12113 12114 12115 12116 12117 12118 12119 12120 12121 12122

5/16 12123 12124 12125 12126 12127 12128 12129 12130 12131 12132

3/8 ** ** ** ** ** ** ** ** ** **

1/2



when large internal stresses

are permissible to increase the

back-out torque needed and

increase the resistance

to loosening.





Thread Forming ScrewsS

CR

EW

S

Double Lead Tri-Point – This style of thread forming screw has a tri lobular point and a double lead helical thread pattern.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4

5 12136 ** **

6 12139 12140 12141 12142 12143 ** **

8 12146 12147 12148 12149 12150 12151 12152 **

10 12155 12156 12157 12158 12159 12160 12161 12162 **

12 12165 12166 12167 12168 12169 12170 12171 12172 **

14

1/4 12173 12174 12175 12176 12177 12178 12179 12180 12181 12182 12183

5/16 12184 12185 12186 12187 12188 12189 12190 12191 12192 12193

3/8 12194 12195 12196 12197 12198 12199 12200 12201 12202 12203

1/2


Tapform 3 – This thread forming screw has a full tri lobular body to ensure the proper formation of thread.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4 ** **

5 ** **

6 12204 12205 12206

8 12207 12208 12209

10 12210 12211 12212

12 12213 12214 12215

14

1/4 12218 12219 12220

5/16 12224 12225 **

3/8 12229 12230 12231

1/2


This family of

product is used

when large internal

stresses are permissible to increase

the back-out torque needed and

increase the resistance to loosening.



14


SC

RE

WS

Machine Screws

Fine Thread Machine Screw – The Fine Thread Machine Screw follows the thread a pitch designation of the Unified Form forfine threads.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4 14001 14002 14003 14004 14005 14006

5 14007 14008 14009 14010 14011 14012

6 14013 14014 14015 14016 14017 14018 **

8 14019 14020 14021 14022 14023 14024 14025 14026 **

10 14027 14028 14029 14030 14031 14032 14033 14034 14035 14036 14037 **

12 14038 14039 14040 14041 14042 14043 14044 14045 14046 14047 14048 **

14 14050 14051 14052 14053 14054 14055 14056 14057 14058 14059 **

1/4 ** 14060 14061 14062 14063 14064 14065 14066 14067 14068 14069 14070

5/16 14071 14072 14073 14074 14075 14076 14077 14078 14079 14080 14081

3/8 14082 14083 14084 14085 14086 14087 14088 14089 14090 14091

1/2 14092 14093 14094 14095 14096 14097 14098 14099 14100 14101


Course Thread Machine Screw – The Fine Thread Machine Screw follows the thread a pitch designation of the Unified Form forcoarse threads.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4 14102 14103 14104 14105 14106 14107

5 14108 14109 14110 14111 14112 14113

6 14114 14115 14116 14117 14118 14119 **

8 14120 14121 14122 14123 14124 14125 14126 14127 **

10 14128 14129 14130 14131 14132 14133 14134 14135 14136 14137 14138 **

12 14139 14140 14141 14142 14143 14144 14145 14146 14147 14148 14149 **

14 14151 14152 14153 14154 14155 14156 14157 14158 14159 14160 **

1/4 ** 14161 14162 14163 14164 14165 14166 14167 14168 14169 14170 14171

5/16 14172 14173 14174 14175 14176 14177 14178 14179 14180 14181 14182

3/8 14183 14184 14185 14186 14187 14188 14189 14190 14191 14192

1/2 14193 14194 14195 14196 14197 14198 14199 14200 14201 14202


This family of fasteners is

distinguished by having threads

along the entire body of the screw.

They will have a blunt point and

are to be used in pre tapped holes.





Plaston – Anchor’s original PLASTON™ full-bodied tapping screws give superior performance in plastic applications.Symmetrical 45 Degree threads widely spaced on the screw shank hold more material than standard tapping screws, offeringincreased strip-out resistance. Sharp thread profiles help reduce boss cracking and splitting. Boss and hole dimensions are compatiblewith standard screws… require no mold changes.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4 16001 16002 16003 **

5

6 ** 16004 16005

8 ** 16006 16007 **

10 16008 16009 16010 **

12 16011 16012 16013 **

Plastic Application Screws


Plaston II – Specially designed for plastics, Anchor’s high performance thin bodied fastener with distinctive alternating threads;high 30 Degree threads and low 60 Degree threads give improved performance in most brittle materials. Lower driving torque, higherresistance to pull-outs and stripping, reduced boss breakage, cracking and splitting make PLASTON II™ the fastener of choice for allrapid assembly applications.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4

5

6 ** 16014 16015

7 ** 16016 16017 **

8 16018 16019 16020 16021

9 16022 16023 16024 16025

10 16026 16027 16028 16029

11 16030 16031 16032 **

12 16033 16034 16035 16036

13 16037 16038 16039 16040

14

1/4 16041 16042 16043 16044 **





16

SC

RE

WS

This family of screw shall have

spaced threads with either of the

below drill points.

Self Drilling Screw Type BSD

#2 Point – The #2 Point is used for applications with panel thicknesses of .080" - .175".

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4

5

6

8 15001 15002 15003 15004 **

10 15005 15006 15007 15008 **

12 15009 15010 15011 15012 **

14

1/4 15013 15014 15015 15016 **

5/16

3/8

1/2



1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4

5

6

8 15017 15018 15019 **

10 15020 15021 15022 **

12 15023 15024 15025 **

14

1/4 15026 15027 15028 **

5/16

3/8

1/2






SC

RE

WS

Self Drilling Screw Type CSD


1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4

5

6

8 15029 15030 15031 15032 **

10 15033 15034 15035 15036 **

12 15037 15038 15039 15040 **

14

1/4 15041 15042 15043 15044 **

5/16

3/8

1/2



1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4

5

6

8 15045 15046 15047 **

10 15048 15049 15050 **

12 15051 15052 15053 **

14

1/4 15054 15055 15056 **

5/16

3/8

1/2


This family of screw will have

threads of machine screw

diameter-pitch approximating

Unified Form with either of the

below drill points.




18

SC

RE

WS

FRP Bolts

FRP Bolt – The FRP bolt has been designed to provide a low profile, large diameter head and radius fillet for an even pressureclamp load.The ribbed neck provides a lock into the hinge or FRP panel to prevent unwanted twisting.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4

5

6

8

10

12

14

1/4 22001 22002 22003 22004 22005 22006 22007 22008 22009 22010 22011

5/16 22012 22013 22014 22015 22016 22017 22018 22019 22020 22021

3/8 22022 22023 22024 22025 22026 22027 22028 22029 22030 22031

1/2


The FRP bolt has been designed to

provide a low profile, large diameter

head and radius fillet for an even

pressure clamp load. The ribbed neck

provides a lock into the hinge or FRP

panel to prevent unwanted twisting.

Fiberglass Reinforced Panel

notes





BO

LTS

Carriage Bolts

.250 Rib Neck – This carriage bolt provides a full 1/4 inch of engaged ribs to ensure that unwanted rotation during torque downwon’t occur.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4

5

6

8

10 ** 23001 23002 23003 23004 23005 23006 **

12 ** 23007 23008 23009 23010 23011 23012 **

14

1/4 ** 23013 23014 23015 23016 23017 23018 23019 23020 23021

5/16 ** 23022 23023 23024 23025 23026 23027 23028 23029 23030

3/8 ** 23031 23032 23033 23034 23035 23036 23037 23038 23039

1/2 ** 23040 23041 23042 23043 23044 23045 23046 23047


.407 Rib Neck – This carriage bolt provides a full 13/32 inch of engaged ribs to ensure that unwanted rotation during torque downwon’t occurs.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4

5

6

8

10 23048 23049 23050 23051 23052 ** **

12 23053 23054 23055 23056 23057 ** **

14

1/4 ** 23058 23059 23060 23061 23062 23063 23064 23065

5/16 ** 23066 23067 23068 23069 23070 23071 23072 23073

3/8 ** 23074 23075 23076 23077 23078 23079 23080 23081

1/2 ** 23082 23083 23084 23085 23086 23087 23088


This product is traditionally

a round headed bolt primarily

used in wood. It is threaded along

part of the shank. Inserted into

holes already drilled.




20

BO

LTS

Carriage Bolts

.594 Rib Neck – This carriage bolt provides a full 19/32 inch of engaged ribs to ensure that unwanted rotation during torque downwon’t occur.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4

5

6

8

10 23090 23091 23092 ** **

12 23094 23095 23096 ** **

14

1/4 ** 23097 23098 23099 23100 23101 23102 23103

5/16 ** 23104 23105 23106 23107 23108 23109 23110

3/8 ** 23111 23112 23113 23114 23115 23116 23117

1/2 ** 23118 23119 23120 23121 23122 23123


Regular Square Neck – These carriage bolts have a long square neck designed to be placed into applications where rotation isnot wanted.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4

5

6

8

10 ** 23124 23125 23126 23127 23128

12 ** 23129 23130 23131 23132 23133

14

1/4 ** 23134 23135 23136 23137 23138

5/16 ** 23139 23140 23141 23142 23143

3/8 ** 23144 23145 23146 23147 23148

1/2 ** 23149 23150 23151 23152 23153











BO

LTS

Carriage Bolts

Short Square Neck – These carriage bolts have a short square neck designed to be placed into applications where rotation isnot wanted.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4

5

6

8

10 ** 23154 23155 23156 23157 23158

12 ** 23159 23160 23161 23162 23163

14

1/4 ** 23164 23165 23166 23167 23168

5/16 ** 23169 23170 23171 23172 23173

3/8 ** 23174 23175 23176 23177 23178

1/2 ** 23179 23180 23181 23182 23183


2 Fin Neck – These carriage bolts have 2 fins protruding from the neck designed to be placed into applications where rotation isnot wanted.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4

5

6

8

10

12

14

1/4 ** 23184 23185 23186 23187 23188 23189

5/16 ** 23190 23191 23192 23193 23194 23195

3/8 ** 23196 23197 23198 23199 23200 23201

1/2 ** 23202 23203 23204 23205 23206 23207










22

BO

LTS

Carriage Bolts

4 Fin Neck – These carriage bolts have 2 fins protruding from the neck designed to be placed into applications where rotation isnot wanted.

1/4 5/16 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4

5

6

8

10

12

14

1/4 ** 23208 23209 23210 23211 23212 23213

5/16 ** 23214 23215 23216 23217 23218 23219

3/8 ** 23220 23221 23222 23223 23224 23225

1/2 ** 23226 23227 23228 23229 23230 23231


notes










BO

LTS

Bottom Rail Bolts

Bottom Rail Bolt

1/4 5/16 1/2 15/16 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3

4

5

6

8

10

12

14

1/4

5/16 21001 21002 21003 21004 21005 21006

3/8 21007 21008 21009 21010 21011 21012 ** ** ** **

1/2


A Bottom Rail Bolt, also known

as the cross member bolt, is a

structural bolt used in the assembly

of truck trailers. These bolts are used to fasten and hold the

bottom rail and the side wall to the cross member. These bolts are

designed to be strong, fasten tight, and remain tight.

notes




24

BO

LTS

Structural Bolts

Structural Bolt

1-1/2 1-3/4 2 2-1/4 2-1/2 2-3/4 3 3-1/2 4 4-1/2 5 5-1/2 6

1/2 24001 24002 24003 24004 24005 24006 24007 24008 24009 24010 24011 24012 24013

5/8 24014 24015 24016 24017 24018 24019 24020 24021 24022 24023 24024 24025 24026

3/4 24027 24028 24029 24030 24031 24032 24033 24034 24035 24036 24037 24038

7/8 24039 24040 24041 24042 24043 24044 24045 24046 24047 24048 24049 24050

1 24051 24052 24053 24054 24055 24056 24057 24058 24059 24060 24061

Import or Domestic Buy Only Longer lengths and larger diameters may be available upon request


primarily for holding together

high strength bolted joints.

notes





BO

LTS

Standard Floor Screws – The Standard Floor Screw uses a Type F design point to allow for maximum installation ease while providinga large back out torque.

3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 3 3-1/2 4 4-1/2 4-3/4 5 6

1/4-20 11394 11395 11396 11397 11398 11399 11400 11401 11402 11424 11425 11426 11427 11428 11429

5/16-18 11404 11405 11406 11407 11408 11409 11410 11411 11412 11430 11431 11432 11433 11434 11435

FLO

OR

BO

AR

D S

CR

EW

SFloor Board Screws


Premium Floor Screws – The Premium Floor Screw is our flagship item and was developed for specifically for the Truck Trailer industry.This item uses a double lead tri-point style to provide a premium installation with the best back out torque available.

3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2 3 3-1/2 4 4-1/2 4-3/4 5 6

1/4-20 12174 12175 12176 12177 12178 12179 12180 12181 12182 12232 12233 12234 12235 12236 12237

5/16-18 12184 12185 12186 12187 12188 12189 12190 12191 12192 12238 12239 12240 12241 12242 12243


These parts are Thread

Cutting Screws or Thread

Forming Screws specifically

designed to work best in the

manufacturing of flooring.

notes



26


Dimensions Brazier Head (B) Truss Head (T) Flush Head (90)

Dia. (No.) MaximumHole Size A B C B C B C

3/16 (6) .203 .195-.191 .394-.356 .125-.113 .469-.406 .088-.078 .354-.328 .085-.075

1/4 (8) .266 .259-.254 .525-.475 .152-.136 .594-.531 .115-.103 .473-.437 .113-.101

5/16 (10) .328 .322-.317 .656-.594 .201-.181 .797-.703 .141-.127 .589-.547 .141-.127

3/8 (12) .391 .385-.380 .787-.713 .248-.223 .922-.828 .168-.152 .709-.656 .168-.152

ANCHOR LOKLOCK BOLTFASTENING SYSTEMThe Anchor Lok exceeds the toughest performance

requirements for a variety of high-strength applications.*

Manufactured to the same high-quality standards you have

come to expect and appreciate from Anchor Bolt & Screw Co.

Features three head styles available in aluminum and steel.

Benefits include vibration-resistance, uniform strength and

easy installation.

Fastening System

* Performance and material data are available upon requestSee page 29 for Grip Data

Identification Key ABLB A12 4Prefix is head style and Anchor lock boltA = Anchor, B = Braiser head, LB = Lock bolt

Material, A = Aluminum, S = Steel, zinc-plated

Last digit denotes approximate grip range. (See specifications)

For more information about Anchor Lok please contact your friendly

Anchor Bolt & Screw Co. sales force representative.




AN

CH

OR

LO

K

Fastening System

ANCHOR LOKLOCK BOLTFASTENING SYSTEMGRIP DATA

6 (3/16) Diameter 8 (1/4) Diameter

Grip Grip GripNo. Min. Max. D±1/8,-0 E±1/8,-0 D±1/8,-0 E±1/8,-0

2 .063 .188 .394 1.404 .485 1.520(1.6) (4.77) (10.0) (35.66) (12.31) (38.60)

3 .125 .250 .457 1.466 .548 1.583(3.17) (6.35) (11.60) (37.23) (13.91) (40.20)

4 .188 .313 .519 1.529 .610 1.654(4.77) (7.95) (13.18) (38.83) (15.49) (42.01)

5 .250 .375 .582 1.591 .673 1.708(6.35) (9.52) (14.78) (40.41) (17.09) (43.38)

6 .313 .438 .644 1.654 .735 1.770(7.95) (11.1) (16.35) (42.01) (18.66) (44.95)

7 .375 .500 .707 1.716 .798 1.833(9.52) (12.7) (17.95) (43.58) (20.26) (46.55)

8 .438 .563 .769 1.779 .860 1.895(11.1) (14.30) (19.53) (45.18) (21.84) (48.13)

9 .500 .625 .832 1.841 .923 1.958(12.7) (15.87) (21.13) (46.76) (23.44) (49.73)

10 .563 .688 .894 1.904 .985 2.020(14.30) (17.47) (22.70) (48.36) (25.01) (51.30)

11 .625 .750 .957 1.966 1.048 2.083(15.87) (19.05) (24.30) (49.93) (26.61) (52.90)

12 .688 .813 1.019 2.029 1.110 2.145(17.47) (20.65) (25.88) (51.53) (28.19) (54.48)

13 .750 .875 1.082 2.091 1.173 2.208(19.05) (22.22) (27.48) (53.11) (29.79) (56.08)

14 .813 .938 1.144 2.154 1.235 2.270(20.65) (23.82) (29.05) (54.71) (31.36) (57.65)

15 .875 1.000 1.207 2.216 1.298 2.333(22.22) (25.40) (30.65) (56.28) (32.96) (59.25)

16 .938 1.063 1.269 2.279 1.360 2.395(23.82) (27.00) (32.23) (57.88) (34.54) (60.83)

17 1.000 1.125 1.332 2.341 1.423 2.458(25.40) (28.57) (33.83) (59.46) (36.14) (62.43)

18 1.063 1.188 1.394 2.404 1.485 2.520(27.00) (30.17) (35.40) (61.06) (37.71) (64.00)

19 1.125 1.250 1.457 2.466 1.548 2.583(28.57) (31.75) (37.00) (62.63) (39.31) (65.60)

20 1.188 1.313 1.519 2.529 1.610 2.645(30.17) (33.35) (38.58) (64.23) (40.89) (67.18)

* Performance and material data are available upon request

Grip Data

10 (5/16) Diameter 12 (3/8) Diameter

Grip Grip GripNo. Min. Max. D±1/8,-0 E±1/8,-0 D±1/8,-0 E±1/8,-0

4 .125 .375 .749 1.910 .809 2.121(3.17) (9.52) (19.02) (48.51) (20.54) (53.87)

6 .250 .500 .874 2.035 .934 2.246(6.35) (12.7) (22.19) (51.68) (23.72) (57.04)

8 .375 .625 .999 2.160 1.059 2.371(9.52) (15.87) (25.37) (54.86) (26.89) (60.22)

10 .500 .750 1.124 2.285 1.184 2.496(12.7) (19.05) (28.54) (58.03) (30.07) (63.39)

12 .625 .875 1.249 2.410 1.309 2.621(15.87) (22.22) (31.72) (61.21) (33.24) (66.57)

14 .750 1.000 1.374 2.535 1.434 2.746(19.05) (25.40) (34.89) (64.38) (36.42) (69.74)

16 .875 1.125 1.499 2.660 1.559 2.871(22.22) (28.57) (38.07) (67.56) (39.59) (72.92)

18 1.000 1.250 1.624 2.785 1.684 2.996(25.40) (31.75) (41.24) (70.73) (42.77) (76.09)

20 1.125 1.375 1.749 2.910 1.809 3.121(28.57) (34.92) (44.42) (73.91) (45.94) (79.27)

Grip Data

For more information about Anchor Lok please

contact your friendly Anchor Bolt & Screw Co.

sales force representative.



28

AN

CH

OR

LO

K

ABM Panelok™ Bolt – This modified FRP bolt has been designed to provide a low profile, large diameter head and radius fillet for aneven pressure clamp load. It has been designed with an undercut radius. The locking feature on this part provides a chemical bond withthe accompanying T-Nut. The ribbed neck provides a lock into the hinge or FRP panel to prevent unwanted twisting.

ABM Panelok™

7/8 1 1-1/4

5/16-18 22032 22033 22034

ABM Panelok™ T-Nut – This special T-Nut has been designed with a low profile head and a T-55 Torx® (or equivalent 6 lobe) drive tomake this a tamper resistant fastening system.

3/8 1/2 5/8

5/16-18 41001 41002 41003

Anchor Bolt & Screw Co. has taken the worry out of FRP

and door hardware fasteners with the uniquely designed,

built-to-last ABM Panelok™ System.

Our years of experience have allowed us to engineer this

part for extra strength and durability. The ABM Panelok™

has been proven to outlast all other door and FRP

hardware currently available in the market.

Often imitated, never duplicated.





AB

M P

AN

ELO

K™

Anchor BoltsA

NC

HO

R B

OLT

S A

ND

TH

RE

AD

ED

RO

D

Threaded Rod

Threaded Rod is a type of connecting rod that

has threads facing the same direction. It is

used for anything you can’t use a standard

length bolt for.Threaded rod is a multi-purposed

product used in construction,

plumbing, electrical, industrialized

work, and residential settings.

These rods are available in Unified

National Coarse Threads and

Unified National Fine Threads.

These bolts are used to secure structural

members of construction to the foundation

of the constructions, whether wood, steel, or

a composite.

• Swaged Anchors

• Hook Anchors

• Crane Hook Anchors

• Sleeve Anchors

• Wedge Type Anchors



30

Concrete Screws

These products are specifically designed to retain

engagement in concrete or other similar materials.

Concrete Anchors

This product line is used to fasten structural elements

of steel, wood or other composite to concrete or other

similar substance.




CO

NC

RE

TE

SC

RE

WS

AN

D A

NC

HO

RS

Pipes and FittingsP

IPE

S, F

ITT

ING

S, S

TR

UT

S

We supply a full range of pipes, fittings, and

valves made of either steel or stainless steel.

In an effort to provide you with the best solution

for you, please call or email us so we can

determine which of our products will work best

for your need.

Strut and Accessories

We offer quality support systems and enclosures

for the mechanical, electrical and telecom-

munications industries. The metal framing

support system provides an economical

solution for electrical, mechanical and industrial

supports. They are fully adjustable and

reusable, with a complete line of channels,

fittings and accessories for multi-purpose

applications.



32

Distributor Lines

Page 34 – Avdel Cherry / TEXTRONAvdel Cherry Textron is a 60 year leader in the designand manufacture of quality engineered assemblysystems, including structural and nonstructural blindrivets, threaded inserts,lockbolts, speed fastening,self-piercing rivets, and installation tools.

Page 35 – Heyco Heyco Products, Inc. is an injectionmolding, precision, non-ferrous stamping, and dry-rollmill manufacturing facility. Their molding productsinclude: non-metallic wiring systems and components,which consist of liquid tight fittings and conduits, IECconnectors, fasteners, bushings, and plugs. Productsfrom the stamped line include: connectors, bladesand pins.

Page 36 – ITW/Fastex® Fastex is a division ofIllinois Tool Works (ITW), a Fortune 200 company knownworldwide for its state-of-the-art engineering andtechnology. In business for more than 40 years, Fastexis the recognized leader in the development andmanufacturing of plastic and metal fasteners andcomponents.

Page 37 – INDUX® INDUX, for over 40 years, has beenthe most prestigious and experienced manufacturer ofcold headed parts. Widely known by distributorsand OEM’s for producing standard and special fastenersfor precise and safe assemblies. INDUX parts aremanufactured under very strict quality specifications,using today’s technologies.

Page 38 – MAGNA® A leading manufacturer ofscrewdriver bits for all industrial and professionalassembly applications. Plus a full line of industrial powersockets and industrial hand drivers.

Page 39 – MARSON CORPMarson/Creative began making rivets and riveting toolsin 1961 to supply the automotive repair industry. Today,the Massachusetts based company offers a wide rangeof rivets in steel aluminum, stainless steel, copper andplastic for use in applications from aircraft andappliances to toys and construction equipment. TheISO-9000 certified company also offers customengineering and services for needs outside the norm.

Page 40 – Richco®

For more than 40 years, Richco Inc., has specializedin designing plastic parts to meet the specific needsof engineers in the electronics Industry. As a result,the Chicago company’s product includes manyinnovative and up-to-date components available for suchapplications As circuit boards, wore routing, cable.

Page 41 – Tinnerman®

The pioneer in spring tension fastening, Tinnerman hasgrowth to be the leader in the industry. Since the adventof the first speed nut fasteners over 60 years ago,development and production facilities have beensteadily improved, expanded and modernized. Today,there are over 15,000 Tinnerman brand fasteners tochoose from. When you see the “Tinnerman T”, youknow the fastener will do the job better and faster.

Page 42 – Oetiker®

The premier manufacturer of hose clamps and rings aswell as the unique, patented Swing Coupling. For over40 years Oetiker® has become the name to request anddepend on for all clamp, ring and coupling needs.

Page 43 – Recoil®

The Simple, Cost Effective System for Repairing orCreating Stronger Threads.

To augment its manufacturing and direct import capabilities, Anchor Bolt and Screw is a masterdistributor for many worldwide fastener companies. This Allows Anchor Bolt and Screw to fill allyour Fastener needs.




DIS

TR

IBU

TO

R L

INE

S

Distributor LinesD

IST

RIB

UT

OR

LIN

ES

For a complete listing of all

available parts please

contact your friendly

Anchor Bolt & Screw Co.


A 60 year leader in the design and manufacture of quality engineered assembly systems.



34

DIS

TR

IBU

TO

R L

INE

SDistributor Lines














Developer and manufacturer of plastic and metal fasteners and components.

Distributor LinesD

IST

RIB

UT

OR

LIN

ES



36

DIS

TR

IBU

TO

R L

INE

SDistributor Lines

For a complete listing of all available parts

please contact your friendly Anchor Bolt &

Screw Co. sales force representative.

For over 40 years, Indux has

been the most prestigious and

experienced manufacturer of cold

headed rivets. Indux rivets are

manufactured under very strict

quality specifications, using

today’s latest technologies.









Distributor Lines

A leading manufacturer of screwdriver bits

for all industrial and professional assembly

appl icat ions.

Plus a full line

of industrial

power sockets

and industrial

hand drivers.

DIS

TR

IBU

TO

R L

INE

S



38

DIS

TR

IBU

TO

R L

INE

SDistributor Lines






Marson is one of the largest manufacturers

and suppliers of blind rivets, threaded

inserts, and rivet setting tools in the

United States.




Distributor LinesD

IST

RIB

UT

OR

LIN

ES

Richco, Inc. Is a global manufacturer of plastic

and metal fasteners, wire management

devices, circuit board hardware and custom

components.








40

DIS

TR

IBU

TO

R L

INE

SDistributor Lines






For more than 60 years, Tinnerman has

excelled at meeting the individuals need

for uniquely designed fasteners and

retaining rings.









Distributor LinesD

IST

RIB

UT

OR

LIN

ES

For over 50 years, Oetiker has revolutionized

clamping of hoses, pipes and other objects

with a great variety of clamps and rings for a

wide range of materials.



42

DIS

TR

IBU

TO

R L

INE

SDistributor Lines






Complete Thread Fastener Systems




Value Added Services


In our continued efforts to provide the solutions you, our customer, demand,

we have developed and continue to develop services which we feel add

value to your experience with us. Some of these services are structured to

help control your inventory levels so that your costs are reduced. Other

services we offer are designed to assist your or your customers engineering

department so that a cost savings can be attained through re-engineering.

All of the services we have created and currently offer have been requested

by you, our customer, and we offer them to all of our customers should you

find the need to utilize them.

If you would like to learn more about any of the services we offer or if

you have a need for a new service please contact any of our friendly,

trained staff.

Currently offered services:

VMI (Vendor Managed Inventory)We offer multiple levels of Vendor Managed Inventory ranging from a simple exchange of information to a full blown point of use scan system. Use of this program will require additional validation.

EDI (Electronic Data Interchange)We currently have the ability to participate in any EDI relationships.

Consignment InventoryWe allow qualified customers the ability to hold inventory they may need and only pay as they use it. Use of this program will require additional validation.

Express DeliveryFor items we have in stock we can have it delivered as quickly as the next day.

Hold for Release ProgramWe will hold inventory for a qualified customer as long as 12 months at no additional charge. Use of this program will require additional validation.

Custom EngineeringWith domestic manufacturing capabilities and over 50 years of manufacturing experience we can assist with engineering a product to fit specific customer needs.

Worldwide SourcingWith the relationships we have developed and the knowledge of sources we have attained, we will find the product you are looking for.

2001 N. Cornell Avenue

Melrose Park, Illinois 60160

As of the first quarter of 2007:

Anchor Bolt and Screw Co.

1560 Frontenac Road

Suite 164

Naperville, Illinois 60563

Toll Free: 800-227-4748

Phone: 708-681-2100

Fax: 708-343-7965

E-mail: [email protected]

ABSCO406

Documents

Anchor B&S 2006 · PDF fileAnchor Bolt and Screw is one of the largest manufacturers and distributors of high quality fasteners. For over 50 years, Anchor Bolt and Screw has