Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
REVISION 04/2015
Anchor SocketInstallation Tips
Choosing the Correct Socket:
Aluminum Plastic BronzeResidential / Chlorinated X X XResidential / Salt System X XCommercial X
Choosing the correct socket is important for a safe longlasting pool.
Perma-Cast Co. Pueblo, CO www.permacastonline.com
Call 719-544-9544
Anchor Socket Drainage:It is critical that anchor socket drain holesare always open and free of debris. This shouldnot only be checked during installation but periodically through the season to allow properdrainage. Improper drainage can cause corrosionwhich could lead to injury or damage to pool deck and eguipment.
Getting the Right Fit:Determine the correct location and placement of anchor socket.
Anchor Socket Bonding:All Anchor Sockets should be bonded to the poolbonding grid. Be sure to follow all NEC and local building codes.
Aluminum Sockets
PS-4019-C PS-4019-A PS-3019-A
Bronze Sockets
PS-4019-BC PS-4019-B PS-3019-B
PS-6019-BC
Plastic
PS-4019-P
DrainHoles
Level
Anchor Distance
Anchor top flush with top
of conrete
Height
AnchorSetback
*Check with your Handrail and Ladder Manufacturer for proper measurments.*
CenterDistance
AnchorDistance
Width Dimension
AnchorSetback
It is important that the ladder and handrail have the proper anchor setback, anchor distance, be flush with the top of the deck, and be level. By not checking all these measurements could cause injury or damage to pool deck and poolequipment.
Concrete:When selecting concrete makesure the minimum compressionstrength is 3000 PSI. Also allow the cement to cure perthe manufacturer’s instructions.Along with following all local building codes.
Anchor top flush with top
of conrete
Level