20
www.heatit.com !!! NEWS AND UPCOMING PRODUCTS 20 18 HEATIT

AND UPCOMING PRODUCTS HEATIT 18System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: AND UPCOMING PRODUCTS HEATIT 18System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat

www.heatit.com

!!! NEWSAND UPCOMING

PRODUCTS

2018HEATIT

Page 2: AND UPCOMING PRODUCTS HEATIT 18System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat
Page 3: AND UPCOMING PRODUCTS HEATIT 18System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat

ROADMAP2018

Page 4: AND UPCOMING PRODUCTS HEATIT 18System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat

4

WARRANTY - YOUR SAFETYVer.

2018

-A

2 yr

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

www.heatit.com

NEW

S N

EWS

NEW

S N

EWS Heatit Z-TRM2 is an electronic thermostat for electrical floor heating.

It has a built-in Z-Wave chip that may be integrated in a variety of smart home systems. Heatit Z-TRM2 is an updated version of the product Heatit Z-Wave. We have included the following new features:

HEATIT Z-TRM2

• Firmware updates (OTA)• Power metering• Multilevel sensor command class

• S2 security• Relay status

Heatit Z-Scene Controller is a Z-Wave module which has been developed to fit the GIRA KNX push sensors. It is equipped with wireless Z-Wave communication that may be used to control other Z-Wave applications such as dimmers, relays e.a. The Heatit Z-Scene Controller can be used as a central scene controller. It has built in a 5A relay.

The Heatit Z-Temp is an electronic temperature sensor for measuring room temperature. You can also connect an external sensor (floor sensor or external room sensor).The built-in temperature sensor measures the ambient temperature. It allows you to control your heating/cooling, based on the room temperature in the room where it is installed.

HEATIT Z-TEMP

HEATIT Z-WATERHeatit Z-Water is a DIN-rail regulator for controlling hydronic heating. It can manage up to 10 heating circuits and it has 4 analog/digital inputs. The 10 x relay outputs are freely controlled through the Z-Wave network, and may be used for various purposes.The regulator can be connected to different temperature sensors (linked devices) through your Z-Wave gateway. Can be used together with Heatit Z-Temp sensor in each zone.

HEATIT Z-SCENE CONTROLLER

!!! NYHETEROG KOMMENDE

PRODUKTER

AND COMING PRODUCTSNEWS

Page 5: AND UPCOMING PRODUCTS HEATIT 18System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat

WARRANTY - YOUR SAFETY WARRANTY - YOUR SAFETYVer.

2018

-A

2 yr

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

www.heatit.com

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

5

2 yrwww.heatit.com

NEW

SCO

MIN

G

2018

COM

ING

20

18

Heatit Z-Stove Guard consists of an intelligent temperature sensor and a 25A relay. It can be used with all electrical stoves. The Stove Guard monitors the temperature on the stove and if a dangerous situation accurs, the stove guard will cut off the power. Mandatory product in all new installations in Norway. Certified according to EN 50615.

HEATIT Z-STOVE GUARD

COM

ING

201

8

• Temperature control• Outdoor applications

HEATIT Z-RELAYHeatit Z-Relay multipurpose relay module can be used for many different applications. The IP 55 rated casing makes it useful for any outdoor application. We offer the relay in 25A and we will also release a 16A version later. The relay has 3 inputs, you can use both analog and digital inputs, or a combination. Heatit Z-Relay is a multipurpose product and can be used for:

• Boiler control• Leakage control

COM

ING

20

18

+

The Z-Din 616 is a 6 x 16A potential free relays for Din rail mounting.The 6 independent relay switches of the Heatit Z-DIN 616 can freelybe controlled from the Z-Wave network and be used for many different purposes. All 6 relay switches are galvanically isolated from each other and may be used for controlling AC and/or DC loads. Each relay switch is rated for loads of up to a maximum of 16A.

HEATIT Z-DIN 616

Dimmer for many different types of light sources. The Heatit Z-Dimmer works on low loads without causing the lights to flicker. The dimmer works fine from low loads as 1W and upwards. It dims 230V halogen- and incadescent bulbs, LED from 1-200VA, dimable LED-drivers og electronic transformers.

HEATIT Z-DIM

Snow melting automation keeps your outdoor areas dry and free from ice and snow throughout the winter. It helps prevents accidents in slippery conditions, as well as saving work shoveling, sanding, salting etc. Ground sensors should be mounted in places where snow and ice problems normally occur, it provides functional and energy-saving control of heating cables. Heatit Z-IceControl may be connected to different types of sensors: ground sensors, air sensors, precipitation sensors and roof/gutter sensors.

HEATIT Z-ICECONTROL

!!! NYHETERAND COMING PRODUCTS

Page 6: AND UPCOMING PRODUCTS HEATIT 18System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat

6

WARRANTY - YOUR SAFETYVer.

2018

-A

2 yr

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

www.heatit.com

PRODUKTINFO Heatit Z-TRM2

FEATURES• Floor sensor• Built-in room sensor• External room sensor• Temperature limiter• Weekly program/setback via

gateway or pilot wire• Multilevel sensor command class• Firmware updates (OTA)

• Power metering• LED-diode• May be used in connection

with different NTC-sensors• Lock mode/child lock• Calibration• 8 associations

• Supports encryption mode: S0, S2 Authenticated Class,

S2 Unauthenticated Class

TECHNICAL DATAProtocol Z-Wave

SDK 6.71.00

Rated voltage 230V 50/60Hz

Max load 2900W (resistive load)

750W self-limiting heating cable

Max current 13A

Power consumption <2,0W

Min/max installation temp -20°C - 40°C

Min/max operating temp 5°C - 40°C

Temperature intervals Floor sensor 5°C - 40°C

External room sensor 5°C - 40°C

Hysteresis 0,3°C - 3,0°C (default 0,5°C)

Switch Single-pole switch

Included in package Floor sensor, Art. no. 54 301 07

Compatible with NTC

sensors with values 10, 12, 15, 22, 33 and 47 kΩ @ 25°C

IP Class IP 21

Approvals Z-Wave Plus

CE

EN 60730-1, EN 60730-2-9

EMC 2014/30/EU, RoHS 2011/65/EU

LVD 2014/35/EU

TERMINALUse 1,5mm² or 2,5mm² according to load.

WARRANTY2 years

HEATITZ-TRM2

Heatit Z-TRM2 is an electronic thermostat for electrical floor

heating. The thermostat has a built-in Z-Wave chip that may

be connected with Home Automation systems like Fibaro,

Futurehome, Smarthings, Homeseer, Vera, Zipato etc.

Heatit Z-TRM2 is equipped with a single pole switch and fits most

System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.).

The thermostat can withstand a load of max 13A /2900W at 230V.

At higher loads the thermostat must control a contactor. The

thermostat may be connected to two wired external sensors.

The thermostat has the capacity of up to 8 associations (relays,

wall plugs etc.).

The thermostat is designed for electrical heating.

ART. NO.WHITE

ART. NO.BLACK

PRODUCT Z-WAVE FREQUENCY

54 305 55 54 305 56 Heatit Z-TRM2 thermostat 2900W 13A EU 868,4 MHz

99 305 98 99 305 88 Heatit Z-TRM2 thermostat 2900W 13A BR 921,4 MHz

99 305 97 99 305 87 Heatit Z-TRM2 thermostat 2900W 13A US 908,4 MHz

99 305 96 99 305 86 Heatit Z-TRM2 thermostat 2900W 13A RU 869 MHz

99 305 95 99 305 85 Heatit Z-TRM2 thermostat 2900W 13A US2 916 MHz

99 305 94 99 305 84 Heatit Z-TRM2 thermostat 2900W 13A IND 865,2 MHz

!!! OTA AND POWER METERING

51,1mm

15,6mm21,3mm

Z-TRM2

Made in EUTF 033

HEATING L L N

HEATING N

PILOT WIRE

FLOORSENSOR

EXTERNAL

SENSOR

49,5mm

49,5

mm

HEATIT Z-TRM2 Black RAL 9011

HEATIT Z-TRM2 White RAL 9003

Ver.

2018

-B

Page 7: AND UPCOMING PRODUCTS HEATIT 18System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat

WARRANTY - YOUR SAFETY WARRANTY - YOUR SAFETYVer.

2018

-A

2 yr

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

www.heatit.com

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

7

2 yrwww.heatit.com

HEATIT Z-SCENE CONTROLLER - Z-Wave switch

The Heatit Z-Wave Scene Controller is a Z-Wave module

specifically adapted to Gira KNX touch sensors. The Heatit

Z-Wave Scene Controller is a device with built-in wireless

Z-Wave communication that may be used to control other

Z-Wave devices such as dimmers, relay modules, etc. The scene

controller has a built-in relay that may be used to turn on and off

a local load, e.g. a lamp; thus replacing a standard 1-pole switch.

The Heatit Z-Wave Scene Controller consists of six switches;

two switches behind each of the three buttons. Each switch can

be used individually or configured to work in pairs. For instance:

One side of the button switches the light on, while the other

side switches it off. The module also functions as a scene

controller by transferring various scene commands when the

push buttons are pressed in different ways. All of the 6 buttons

can be programmed to have different functionalities.

In addition to this, the Heatit Z-Wave Scene Controller acts as a

repeater and is able to extend the range of your Z-Wave network.

The switch fits into standard Elko, Schneider Exxact and Gira

System 55 frame systems.

PRODUCT INFO Heatit Z-Scene Controller

FUNCTIONS• Z-Wave Scene Controller is a central scene controller• 230V unit, acts as a repeater increasing network stability• Up to 6 different channels• All six LED-diodes are controlled individually and their

functionality is configurered in the gateway• May be associated to other Z-Wave units • Uses standard Gira push button modules with different

designs and colors• Low power usage, less than 0,3W in standby mode • The firmware contains Multi-Channel Command Class for a

better visualisation and more logical control in the Z-Wave

gateway • Firmware updates (OTA)

TECHNICAL DATAProtocol Z-Wave

SDK 6.61

Rated voltage 230V 50Hz

Max load 1000W 5A (resistive load)

or up to 150W inductive load

Power consumption 0,8W / 0,3W standby

Push buttons Up to 6

Range Up to 40 meters

(depending on surroundings)

IP Class IP 20

Size (LxWxD) 70 x 70 x 27mm (without frame)

Approvals Z-Wave Plus

CE

EN 50491-3:2009, EN 60669-2:2004

EMC 2014/30/EU, RoHS 2011/65/EU

LVD 2014/35/EU

WARRANTY2 years

ART. NO. PRODUCT Z-WAVE FREQUENCY

45 125 55 Heatit Z-Scene Controller - switch EU 868,4 MHz

99 124 71 Heatit Z-Scene Controller - switch BR 921,4 MHz

99 124 72 Heatit Z-Scene Controller - switch US 908,4 MHz

99 124 73 Heatit Z-Scene Controller - switch RU 869 MHz

99 124 74 Heatit Z-Scene Controller - switch US2 916 MHz

99 124 75 Heatit Z-Scene Controller - switch IND 865,2 MHz

GIRA® is a trademark of GIRA Giersiepen GmbH & Co.

70mm

70m

m

80mm

55mm

Ver.

2018

-B

Page 8: AND UPCOMING PRODUCTS HEATIT 18System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat

8

WARRANTY - YOUR SAFETYVer.

2018

-A

2 yr

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

www.heatit.com

PRODUKTINFO Heatit Z-Temp

FEATURES• Built-in room sensor • External sensor• Weekly program/setback via gateway• May be used in connection with different NTC-sensors• Lock mode/child lock• Negative LCD-display• Calibration• Associations• Firmware updates (OTA)• Multilevel sensor command class• Supports encryption mode: S0, S2 Access Control Class,

S2 Authenticated Class, S2 Unauthenticated Class

TECHNICAL DATAProtocol Z-Wave

SDK 6.71.00

Rated voltage 3 x AAA batteries

Min/max installation temp 0°C - 40°C

Min/max operating temp 5°C - 40°C

External sensor -20°C - 100°C

Hysteresis 0,3°C - 3,0°C (default 0,5°C)

Compatible with NTC

sensors with values 10, 12, 15, 22, 33 and 47 kΩ @ 25°C

IP Class IP 21

Color White RAL 9003

Black RAL 9011(Made to order)

Approvals Z-Wave Plus

CE

EN 60730-1, EN 60730-2-9

EMC 2014/30/EU, RoHS 2011/65/EU

LVD 2014/35/EU

WARRANTY2 years

HEATIT Z-TEMP

The Heatit Z-Temp is an electronic temperature sensor for

measuring room temperature. You may also connect an

external sensor (floor sensor or external room sensor).

The built-in temperature sensor measures the ambient

temperature. It allows you to control your heating/cooling,

based on the room temperature in the room where it is

installed.

The Heatit Z-Temp has an LCD-display that shows you the

ambient temperature. You may adjust the settings with the 3

buttons on the unit.

The Heatit Z-Temp is the perfect partner to our

Heatit Z-Water regulator for hydronic heating systems.

ART. NO.WHITE

ART. NO.BLACK

PRODUCT Z-WAVE FREQUENCY

45 125 57 45 125 58 Heatit Z-Temp temperature sensor EU 868,4 MHz

99 125 21 99 125 31 Heatit Z-Temp temperature sensor BR 921,4 MHz

99 125 22 99 125 32 Heatit Z-Temp temperature sensor US 908,4 MHz

99 125 23 99 125 33 Heatit Z-Temp temperature sensor RU 869 MHz

99 125 24 99 125 34 Heatit Z-Temp temperature sensor US2 916 MHz

99 125 25 99 125 35 Heatit Z-Temp temperature sensor IND 865,2 MHz

99 mm

99 mm

20 mm

Page 9: AND UPCOMING PRODUCTS HEATIT 18System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat

WARRANTY - YOUR SAFETY WARRANTY - YOUR SAFETYVer.

2018

-A

2 yr

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

www.heatit.com

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

9

2 yrwww.heatit.com

HEATIT Z-WATER - Regulator for hydronic heating systems

Heatit Z-Water is a DIN-rail regulator for controlling hydronic

heating. Heatit Z-Water is a module that clips right onto a DIN rail

to add a variety of functions to your wireless Z-Wave network.

Heatit Z-Water is equipped with 10 relay outputs and it has 4 analog/

digital inputs. The module can be power supplied from a 230V

AC mains connection, and is able to deliver an output supply of

24V DC or 230V. Heatit Z-Water relay outputs are able to be freely

controlled from the Z-Wave network, and can be used for several

purposes, e.g. on/off control of light, control of valve actuators for

an underfloor heating system, or control of other home automation

systems.

Heatit Z-Water analog/digital inputs (different firmware versions)

can be configured to work with different functionality and can be

connected to potential free contacts, open-collector outputs, and

will be able to control other Z-Wave devices; switches, dimmers, etc.

Furthermore, the inputs can be used as a Scene Controller and

send Central Scene notifications to the Z-Wave gateway.

It is possible to configure the level and the indication of the

status indicator LED in the front of the Heatit Z-Water module.

PRODUCT INFO Heatit Z-Water

FEATURES• The relay outputs may be used for controlling actuators/valves

in a hydronic heating system• May be used to control both 24V actuators and 230V actuators • Can be used together with a Heatit Z-Temp sensor in each zone• DIN rail mounting• Works as a Z-Wave repeater• Firmware updates (OTA) • Available firmware versions (analog/digital inputs) • Supports encryption mode: S0, S2 Access Control Class,

S2 Authenticated Class, S2 Unauthenticated Class

TECHNICAL DATAProtocol Z-Wave

SDK 6.71.00

Rated voltage 100V - 240V 50/60Hz

Power consumption 0.6W standby

Fuse 3.15A Quick-Acting, UMF 250

Schurter Inc., part no.: 3405.0171.11

24V DC output Maximum 1.17A, 28W

Relay outputs Rated carry current: 5A

Max. switching voltage: 250V AC, 30V DC

Max. switching current: 5A

Max. switching power: 1,250 VA, 150W

Inputs Max. input voltage: 10V DC

Input impedance: 10 KΩ

Loop output voltage: 5V DC

Explorer frame supp. Yes

Device type Slave with routing capabilities

Generic device class Binary Switch

Specific device class Valve Open Close

Routing Yes

FLiRS No

Z-Wave Plus Yes

Approvals CE

EN 50491-3: 2009, EN 60669-2: 2004

EMC 2014/30/EU, RoHS 2011/65/EU

LVD 2014/35/EU

WARRANTY2 years

160mm

58m

m

86mm

ART. NO. PRODUCT Z-WAVE FREQUENCY

45 124 75 Heatit Z-Water - regulator for hydronic heating systems EU 868,4 MHz

99 124 21 Heatit Z-Water - regulator for hydronic heating systems BR 921,4 MHz

99 124 22 Heatit Z-Water - regulator for hydronic heating systems US 908,4 MHz

99 124 23 Heatit Z-Water - regulator for hydronic heating systems RU 869 MHz

99 124 24 Heatit Z-Water - regulator for hydronic heating systems US2 916 MHz

99 124 25 Heatit Z-Water - regulator for hydronic heating systems IND 865,2 MHz

Page 10: AND UPCOMING PRODUCTS HEATIT 18System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat

10

WARRANTY - YOUR SAFETYVer.

2018

-A

2 yr

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

www.heatit.com

HEATITZ-RELAY

Heatit Z-Relay multipurpose relay module can be used for many

different applications. The IP 55 rated casing makes it useful for any

outdoor application. Can pull loads up to 16A and 25A.

The relay has three inputs: analog or digital. You can use both

analog and digital inputs, or a combination.

Heatit Z-Relay is a multipurpose product and can be used for the

following applications: • Boiler control• Leakage control• Temperature control• Outdoor applications

The relay has 3 analog/digital inputs and can be used with a lot of

different sensors and meters, from water meter pulse sensors to

NTC temperature sensors.

The relay comes in two different versions, 16A and 25A. They both

have firmware updates (OTA), power metering and S2 security.

We are able to make special firmware if a customer has a special

requirement.

ART. NO. PRODUCT Z-WAVE FREQUENCY

45 125 53 Heatit Z-Relay 16A EU 868,4 MHz

99 124 11 Heatit Z-Relay 16A BR 921,4 MHz

99 124 12 Heatit Z-Relay 16A US 908,4 MHz

99 124 13 Heatit Z-Relay 16A RU 869 MHz

99 124 14 Heatit Z-Relay 16A US2 916 MHz

99 124 15 Heatit Z-Relay 16A IND 865,2 MHz

ART. NO. PRODUCT Z-WAVE FREQUENCY

45 125 54 Heatit Z-Relay 25A EU 868,4 MHz

99 124 31 Heatit Z-Relay 25A BR 921,4 MHz

99 124 32 Heatit Z-Relay 25A US 908,4 MHz

99 124 33 Heatit Z-Relay 25A RU 869 MHz

99 124 34 Heatit Z-Relay 25A US2 916 MHz

99 124 35 Heatit Z-Relay 25A IND 865,2 MHz

45 124 78 Probe for leakage sensor

88 114 85 Bürkert solenoid valve 1/2”

88 114 86 Bürkert solenoid valve 3/4”

PRODUKTINFO Heatit Z-Relay

FEATURES• Multipurpose product for many different applications• Relay 16A or 25A• 3 inputs. Combinations of analog/digital inputs of your choice• External antenna option• Can be used in connection with different NTC-sensors• Calibration• Associations• Firmware updates (OTA)• Power metering• Multilevel sensor command class• Supports encryption mode: S0, S2 Access Control Class,

S2 Authenticated Class, S2 Unauthenticated Class

TECHNICAL DATAProtocol Z-Wave

SDK 6.71.00

Rated voltage 230V 50/60Hz

Max load 3600W/5750W (resistive load)

750W self-limiting heating cable

Max current 16A or 25A

Power consumption 0,8W standby

Min/max installation temp -20°C - 40°C

Min/max operating temp -20°C - 40°C

Hysteresis 0,3°C - 3,0°C (default 0,5°C)

Compatible with NTC

sensors with values 10, 12, 15, 22, 33 and 47 kΩ @ 25°C

Range Up to 50 meters

(depending on surroundings)

IP Class IP 55

Size (LxWxD) 100 x 100 x 46 mm

Approvals Z-Wave Plus

EN 50491-3: 2009

EN 60669-2: 2004

CE

EMC 2014/30/EU

RoHS 2011/65/EU

LVD 2014/35/EU

WARRANTY2 years

Page 11: AND UPCOMING PRODUCTS HEATIT 18System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat

WARRANTY - YOUR SAFETY WARRANTY - YOUR SAFETYVer.

2018

-A

2 yr

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

www.heatit.com

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

11

2 yrwww.heatit.com

LEAKAGE CONTROL

LEAKAGE CONTROL WITH SOLENOID

We have developed the relay module to work with our leakage sensor.

You can control the solenoid valve so you turn off the water supply

when you are away. Automatically close the valve when there is a leak.

The relay can be associated with several leakage sensors.

TEMPERATURE CONTROL

HEATING/COOLING

We are able to control any electrical heating and cooling with the

temperature sensors. Either comfort temperature or max or min

limitations. Can be used in connection with Heatit Z-Temp sensor

for optimal control.

+

BOILER CONTROL

We offer two different relay modules 16A or 25A for boiler

control. You can control your boiler and we have included

power metering so you are able to keep control over

the costs.

OUTDOOR APPLICATIONS

The relay has a IP 55 casing and can be used for any thinkable

application outdoors. Anything from watering in your garden,

frost protection or control of any heating device.

• BOILER CONTROL• LEAKAGE CONTROL• TEMPERATURE CONTROL• OUTDOOR APPLICATIONS

APPLICATIONS

Page 12: AND UPCOMING PRODUCTS HEATIT 18System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat

12

WARRANTY - YOUR SAFETYVer.

2018

-A

2 yr

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

www.heatit.com 5 år2 yr

PRODUCT INFO Heatit Z-DIN

FEATURES• DIN rail module with 6 relay outputs and 6 digital inputs• Z-Wave interface for other systems in order to control them

through the Z-Wave network• Mounted on DIN-rail in switch board• 6 x 16A potential free relays• 2-poled switch solution when using 2 x relays in combination• Works as slave Z-Wave repeater• Firmware Update (OTA)• Supports encryption mode: S0, S2 Access Control Class,

S2 Authenticated Class, S2 Unauthenticated Class

TECHNICAL DATA

Protocol Z-Wave, 868,4 MHz

SDK 6.71.00

Rated voltage 10 - 24V DC 8 - 24V AC

Power consumption 0,6W + 0,5W pr. active relay

(max 4W)

Screw terminals 0,2 - 2,5 mm²

Outputs 6 x 1-pole potential free

(10mm clearance)

Relay switches AC1: 16A 250V AC

AC3: 750W (engine)

AC15: 360VA

Max. inrush current 80A/20ms

Contacts Common and Normally Closed

Inputs 6 x 1-pole potential free

(5 mm clearance), max 10V DC

Input impedance 10 kOhm

Network range Up to 40 meters

(depending on surroundings)

IP Class IP 20

Size (HxWxD) 85 x 105 x 60 mm

M36 6-modules DIN rail

Certifications Z-Wave Plus

CE

EN 50491-3: 2009 EN 60669-2: 2004

EMC 2014/30/EU, RoHS 2011/65/EU

LVD 2014/35/EU

WARRANTY2 years

HEATIT Z-DIN 616

ART. NO. PRODUCT Z-WAVE FREQUENCY

45 125 61 Heatit Z-DIN 6x16A EU 868,4 MHz

99 125 62 Heatit Z-DIN 6x16A BR 921,4 MHz

99 125 63 Heatit Z-DIN 6x16A US 908,4 MHz

99 125 64 Heatit Z-DIN 6x16A RU 869 MHz

99 125 65 Heatit Z-DIN 6x16A US2 916 MHz

99 125 66 Heatit Z-DIN 6x16A IND 865,2 MHz

24V AC/DC

230V AC

230V AC

Vin Vin IN1 IN2 IN3 0V 01NO

01C

02NO

02C

03NO

03C

IN4 0V IN5

INCLUSION

STATUS

0V IN6 0V 04NO

04C

05NO

05C

06NO

06C

Heatit Z-DIN 616 is a 6 x 16A potensial free relays for DIN rail

miounting. The module is equipped with 6 relay switches and 6

digital inputs for mounting on a standard M36 DIN rail (EN50022).

The 6 independent relay switches of the Heatit Z-DIN 616 can freely

be controlled from the Z-Wave network and be used for many

different purposes. All 6 relay switches are galvanically isolated from

each other. and may be used for controlling AC and/or DC loads.

Each relay switch is rated for loads of up to a maximum of 16A.

The 6 digital inputs can be connected to dry contacts, e.g. limit

switches, door/window contacts, or push-buttons. Another option

is to connect them to open-collector outputs from discrete sensors,

e.g. PIR sensors. The 6 inputs of the Heatit Z-DIN 616 may also

function as a scene controllers and activate predefined scenes

in other Z-Wave devices or controllers (by transmitting Central

Scene notifications).

The Heatit Z-DIN 616 is

supplied from a 10 – 24Vdc

power supply. Initiation

of Z-Wave inclusion and

exclusion is executed by

activating a push-button

through a little hole in

the front of the module.

The Heatit Z-DIN 616 is

equipped with a LED in the

front of the module for

different kinds of status

indications.

Page 13: AND UPCOMING PRODUCTS HEATIT 18System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat

WARRANTY - YOUR SAFETY WARRANTY - YOUR SAFETYVer.

2018

-A

2 yr

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

www.heatit.com

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

13

2 yrwww.heatit.com

PRODUCT INFO Heatit Z-IceControl

FEATURES• Snow melting regulator• Controls both electrial and hydronic heating systems• Two outputs controlling two independent zones• Ground sensor• Roof/gutter sensor• External air sensor• Precipitation sensor• Graphic display with help function• MODBUS 485 • Firmware updates (OTA)• Power metering• Supports encryption mode: S0, S2 Access Control Class,

S2 Authenticated Class, S2 Unauthenticated Class

TECHNICAL DATAProtocol Z-Wave

SDK 6.71.00

Rated voltage 230V

Power consumption Max 10VA

Contacts 2 x 16A - potential free

Relay 1 x 10A - for direct load

IP Class IP 20

Size (LxWxD) 213 x 93 x 100mm

Building height: 100mm

Check the height in switch board,

if necessary, adjust DIN rail

13 modules DIN rail

Approvals Z-Wave Plus

CE

EN 60730-1, EN 60730-2-9

EMC 2014/30/EU, RoHS 2011/65/EU

LVD 2014/35/EU

WARRANTY2 years

Heatit Z- IceControl is a snow melting controller for up to two heating

zones. It is developed to melt snow and ice on walkways, steps and

other outdoor areas, as well as on roofs and in roof gutters. Heatit Z-

IceControl is compatible with several kinds of ground- and air sensors.

The controller may be used both for electrical and hydronic heating

systems.

Ground sensors should be mounted in places where snow and ice

problems normally occur, it provides functional and energy-saving

control of heating cables. The sensors can be installed in concrete or

asphalt, or laid under paving stones and tiles. Your problem may be ice

and snow on the stairs in front of your entrance or perhaps a slippery

driveway. In either case, a thermostat is used to regulate your snow

melting system.

The Heatit Z-IceControl receives information about the temperature

and humidity from a sensor. The regulator can distinguish between

rain and snow and predict if there is a chance for ice forming. The

Heatit Z-IceControl regulator will keep the access to your mailbox or

garage free from snow and ice, based on your desired system settings.

The Multireg IceControl Pro must always be installed with

an outdoor air sensor in addition to

a ground sensor or a roof/

gutter sensor.

HEATITZ-ICECONTROL

ART. NO. PRODUCT Z-WAVE FREQUENCY

54 301 79 Heatit Z-IceControl - snow melting regulator EU 868,4 MHz

99 301 80 Heatit Z-IceControl - snow melting regulator BR 921,4 MHz

99 301 81 Heatit Z-IceControl - snow melting regulator US 908,4 MHz

99 301 82 Heatit Z-IceControl - snow melting regulator RU 869 MHz

99 301 83 Heatit Z-IceControl - snow melting regulator US2 916 MHz

99 301 86 Heatit Z-IceControl - snow melting regulator IND 865,2 MHz

99 301 74 Heatit roof/gutter sensor

99 301 75 Heatit ground sensor

99 301 76 Heatit air sensor

99 301 78 Heatit precipitation sensor

213mm

50mm

93mm

100mm

Page 14: AND UPCOMING PRODUCTS HEATIT 18System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat

14

WARRANTY - YOUR SAFETYVer.

2018

-A

2 yr

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

www.heatit.com

PRODUCT INFO Heatit Z-Dim

FEATURES• Multidimmer• Dims:

• LED• 230V halogen• Incandescent lightbulbs• Dimable LED-drivers • Electronic transformators

• Starts at 1VA and dims up to 200VA LED • Trailing edge• Multiway switching option• Electronic thermal cutoff• Electronic current cutoff with automatic reset• Firmware updates (OTA)• Power metering• Supports encryption mode: S0, S2 Access Control Class,

S2 Authenticated Class, S2 Unauthenticated Class

TECHNICAL DATAProtocol Z-Wave

SDK 6.71.00

Rated voltage 230V

Power 1 - 200VA

Input current 0,9A

Controls Push and rotate dimmer

Operating temperature -20°C - 40°C

Connection Max. 2,5mm²

Flush mounting depth 15mm

Approvals Z-Wave Plus

CE

EN 55015/A2: 2009, EN 61547:2009

EN 61000-3-2/A2:2009

EN 61000-3-3:2008

EN 60669-2-1/A12:2010

EN 60669-1:A2:2008

EMC 2014/30/EU, RoHS 2011/65/EU

LVD 2014/35/EU

IP Class IP 20

Color White RAL 9003

Size (LxWxH) 84 x 84 x 35mm

WARRANTY2 years

Dimmer for many different types of light sources.

The Heatit Z-Dimmer works on low loads without causing the

lights to flicker. It dims 230V halogen- and incadescent bulbs,

LED from 1-200VA, dimable LED-drivers og electronic transformers. The dimmer is not affected by startup inrush currents.

3-wire connection.

The Heatit Z-Dimmer fits most frames. It is equipped with a

multiway switching option. This allows you to light and dim a

light source from one dimmer, and later turn it off with another

one. Very practical for stairwells, long hallways etc.

The Heatit Z-Dimmer switches off if the load exceeds the maximum

level. In order for the dimmer to work correctly again, the error must

be corrected and the dimmer turned off and on one time.

The dimmer fits into standard Elko, Schneider Exxact and

Gira System 55 frame systems.

HEATIT Z-DIM - For various light sources

84 mm

84 mm

35 mm

ART. NO. PRODUCT Z-WAVE FREQUENCY

14 444 44 Heatit Z-Dim 200VA - LED dimmer EU 868,4 MHz

99 444 11 Heatit Z-Dim 200VA - LED dimmer BR 921,4 MHz

99 444 12 Heatit Z-Dim 200VA - LED dimmer US 908,4 MHz

99 444 13 Heatit Z-Dim 200VA - LED dimmer RU 869 MHz

99 444 14 Heatit Z-Dim 200VA - LED dimmer US2 916 MHz

99 444 15 Heatit Z-Dim 200VA - LED dimmer IND 865,2 MHz

Ver.

2018

-B

Page 15: AND UPCOMING PRODUCTS HEATIT 18System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat

WARRANTY - YOUR SAFETY WARRANTY - YOUR SAFETYVer.

2018

-A

2 yr

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

www.heatit.com

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

15

2 yrwww.heatit.com

PRODUCT INFO Heatit Z-Stove Guard

FEATURES• Fixed stove guard• Turns stove off automatically if the sensor detects overheating• Memory placement function• Timer function• Child lock• Bluetooth low energy• 25A relay• Calibration• Firmware updates (OTA)• Power metering• Supports encryption mode: S0, S2 Access Control Class,

S2 Authenticated Class, S2 Unauthenticated Class

TECHNICAL DATA STOVE SENSOR Battery 2 x AA

Size (LxWxH) 83 x 21 x 39mm

TECHNICAL DATA STOVE SOCKETProtocol Z-Wave

Bluetooth

NFC

SDK 6.71.00

Rated voltage 230V 50/60Hz

Max current 25A

Size (LxWxH) 234 x 110 x 58mm

Approvals Z-Wave Plus

CE

EN 50615

EMC 2014/30/EU, RoHS 2011/65/EU

LVD 2014/35/EU

WARRANTY2 years

Fits with the most common frames on the market.

Stoves are the main source of house fires. By installing a stove

guard, you can ensure that the stove switches off automatically

if a dangerous situation should arise. Heatit Z-Stove Guard

consists of an intelligent temperature sensor and a 25A relay. It

can be used with all electrical stoves. The Stove Guard monitors

the temperature on the stove and if a dangerous situation accurs,

the stove guard will cut the power. Mandatory product in all new

installations in Norway.

The stove guard consists of a sensor and a relay. It is either

placed behind the stove or in the fuse box. The sensor monitors

the heating elements. If the sensor detects a fire hazard, it

triggers an alarm. If no measures are taken within a short

time, the sensor sends a power cut command to the relay,

turning the stove off.

Certified according to EN 50615.

HEATIT Z-STOVE GUARD

ART. NO. PRODUCT Z-WAVE FREQUENCY

45 125 59 Heatit Z-Stove Guard EU 868,4 MHz

99 126 11 Heatit Z-Stove Guard BR 921,4 MHz

99 126 12 Heatit Z-Stove Guard US 908,4 MHz

99 126 13 Heatit Z-Stove Guard RU 869 MHz

99 126 14 Heatit Z-Stove Guard US2 916 MHz

99 126 15 Heatit Z-Stove Guard IND 865,2 MHz

Heatit Z-Stove Guard may be placed on the wall or in the cooker

hood with wireless communication to the stove socket.

The stove socket replaces a traditional socket. The stove top is

connected directly to the stove socket.

Page 16: AND UPCOMING PRODUCTS HEATIT 18System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat

16

WARRANTY - YOUR SAFETYVer.

2018

-A

2 yr

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

www.heatit.com

GTIN NUMBERS - overview

ART. NO PRODUCT REGION COLOUR GTIN NO

54 305 55Heatit Z-TRM2 Z-Wave thermostat 2900W 13A 868,4 MHz EU

White 7071236013488

54 305 56 Black 7071236013495

99 305 98Heatit Z-TRM2 Z-Wave thermostat 2900W 13A 921,4 MHz BR

White 7071236013501

99 305 88 Black 7071236013518

99 305 97Heatit Z-TRM2 Z-Wave thermostat 2900W 13A 908,4 MHz US

White 7071236013525

99 305 87 Black 7071236013532

99 305 96Heatit Z-TRM2 Z-Wave thermostat 2900W 13A 869 MHz RU

White 7071236013549

99 305 86 Black 7071236013556

99 305 95Heatit Z-TRM2 Z-Wave thermostat 2900W 13A 916 MHz US2

White 7071236013563

99 305 85 Black 7071236013570

99 305 94Heatit Z-TRM2 Z-Wave thermostat 2900W 13A 865,2 MHz IND

White 7071236013587

99 305 84 Black 7071236013594

45 124 54 Heatit Z-Scene Controller 5A Z-Wave switch 868,4 MHz EU White 7071236013884

99 124 71 Heatit Z-Scene Controller 5A Z-Wave switch 921,4 MHz BR White 7071236013891

99 124 72 Heatit Z-Scene Controller 5A Z-Wave switch 908,4 MHz US White 7071236013907

99 124 73 Heatit Z-Scene Controller 5A Z-Wave switch 869 MHz RU White 7071236013914

99 124 74 Heatit Z-Scene Controller 5A Z-Wave switch 916 MHz US2 White 7071236013921

99 124 75 Heatit Z-Scene Controller 5A Z-Wave switch 865,2 MHz IND White 7071236013938

45 124 75 Heatit Z-Water Z-Wave regulator 868,4 MHz EU White 7071236014065

99 124 21 Heatit Z-Water Z-Wave regulator 868,4 MHz BR White 7071236014072

99 124 22 Heatit Z-Water Z-Wave regulator 868,4 MHz US White 7071236014089

99 124 23 Heatit Z-Water Z-Wave regulator 868,4 MHz RU White 7071236014096

99 124 24 Heatit Z-Water Z-Wave regulator 868,4 MHz US2 White 7071236014102

99 124 25 Heatit Z-Water Z-Wave regulator 868,4 MHz IND White 7071236014119

45 125 57Heatit Z-Temp Z-Wave temperature sensor 868,4 MHz EU

White 7071236013600

45 125 58 Black 7071236013617

99 125 21Heatit Z-Temp Z-Wave temperature sensor 921,4 MHz BR

White 7071236013624

99 125 31 Black 7071236013631

99 125 22Heatit Z-Temp Z-Wave temperature sensor 908,4 MHz US

White 7071236013648

99 125 32 Black 7071236013655

99 125 23Heatit Z-Temp Z-Wave temperature sensor 869 MHz RU

White 7071236013662

99 125 33 Black 7071236013679

99 125 24Heatit Z-Temp Z-Wave temperature sensor 916 MHz US2

White 7071236013686

99 125 34 Black 7071236013693

99 125 25Heatit Z-Temp Z-Wave temperature sensor 865,2 MHz IND

White 7071236013709

99 125 35 Black 7071236013716

Page 17: AND UPCOMING PRODUCTS HEATIT 18System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat

WARRANTY - YOUR SAFETY WARRANTY - YOUR SAFETYVer.

2018

-A

2 yr

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

www.heatit.com

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

17

2 yrwww.heatit.com

4512553 Heatit Z-Relay 16A Z-Wave relay module 16A 868,4 MHz EU White 7071236013723

99 124 11 Heatit Z-Relay 16A Z-Wave relay module 16A 921,4 MHz BR White 7071236013730

99 124 12 Heatit Z-Relay 16A Z-Wave relay module 16A 908,4 MHz US White 7071236013747

99 124 13 Heatit Z-Relay 16A Z-Wave relay module 16A 869 MHz RU White 7071236013754

99 124 14 Heatit Z-Relay 16A Z-Wave relay module 16A 916 MHz US2 White 7071236013761

99 124 15 Heatit Z-Relay 16A Z-Wave relay module 16A 865,2 MHz IND White 7071236013778

99 124 31 Heatit Z-Relay 25A Z-Wave relay module 25A 921,4 MHz BR White 7071236014133

99 124 32 Heatit Z-Relay 25A Z-Wave relay module 25A 908,4 MHz US White 7071236014140

99 124 33 Heatit Z-Relay 25A Z-Wave relay module 25A 869 MHz RU White 7071236014157

99 124 34 Heatit Z-Relay 25A Z-Wave relay module 25A 916 MHz US2 White 7071236014164

99 124 35 Heatit Z-Relay 25A Z-Wave relay module 25A 865,2 MHz IND White 7071236014171

5430179 Heatit Z-IceControl Z-Wave snow melting regulator 868,4 MHz EU White 7071236013785

99 301 80 Heatit Z-IceControl Z-Wave snow melting regulator 921,4 MHz BR White 7071236013792

99 301 81 Heatit Z-IceControl Z-Wave snow melting regulator 908,4 MHz US White 7071236013808

99 301 82 Heatit Z-IceControl Z-Wave snow melting regulator 869 MHz RU White 7071236013815

99 301 83 Heatit Z-IceControl Z-Wave snow melting regulator 916 MHz US2 White 7071236013822

99 301 86 Heatit Z-IceControl Z-Wave snow melting regulator 865,2 MHz IND White 7071236013839

14 444 44 Heatit Z-Dim 200V Z-Wave dimmer 868,4 MHz EU White 7071236014003

99 444 45 Heatit Z-Dim 200V Z-Wave dimmer 921,4 MHz BR White 7071236014010

99 444 46 Heatit Z-Dim 200V Z-Wave dimmer 908,4 MHz US White 7071236014027

99 444 47 Heatit Z-Dim 200V Z-Wave dimmer 869 MHz RU White 7071236014034

99 444 48 Heatit Z-Dim 200V Z-Wave dimmer 916 MHz US2 White 7071236014041

99 444 49 Heatit Z-Dim 200V Z-Wave dimmer 865,2 MHz IND White 7071236014058

45 125 32 Heatit Z-Radon meter Z-Wave radon sensor 868,4 MHz EU White 7071236013945

99 125 11 Heatit Z-Radon meter Z-Wave radon sensor 921,4 MHz BR White 7071236013952

99 125 12 Heatit Z-Radon meter Z-Wave radon sensor 908,4 MHz US White 7071236013969

99 125 13 Heatit Z-Radon meter Z-Wave radon sensor 869 MHz RU White 7071236013976

99 125 14 Heatit Z-Radon meter Z-Wave radon sensor 916 MHz US2 White 7071236013983

99 125 15 Heatit Z-Radon meter Z-Wave radon sensor 865,2 MHz IND White 7071236013990

45 125 59 Heatit Z-Stove Guard Z-Wave radon sensor 868,4 MHz EU White 7071236014188

99 126 11 Heatit Z-Stove Guard Z-Wave radon sensor 921,4 MHz BR White 7071236014195

99 126 12 Heatit Z-Stove Guard Z-Wave radon sensor 908,4 MHz US White 7071236014201

99 126 13 Heatit Z-Stove Guard Z-Wave radon sensor 869 MHz RU White 7071236014218

99 126 14 Heatit Z-Stove Guard Z-Wave radon sensor 916 MHz US2 White 7071236014225

99 126 15 Heatit Z-Stove Guard Z-Wave radon sensor 865,2 MHz IND White 7071236014232

Page 18: AND UPCOMING PRODUCTS HEATIT 18System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat

18

WARRANTY - YOUR SAFETYVer.

2018

-A

2 yr

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

www.heatit.com

Page 19: AND UPCOMING PRODUCTS HEATIT 18System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat

WARRANTY - YOUR SAFETY WARRANTY - YOUR SAFETYVer.

2018

-A

2 yr

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

www.heatit.com

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

19

2 yrwww.heatit.com

Photo: Photographer: Per Erik Bjørnback

InHouse Thermo-Floor AS

Istockphoto.comColourbox.com

Page 20: AND UPCOMING PRODUCTS HEATIT 18System 55 frames (Elko RS16, Schneider Exxact, Gira, Jung etc.). The thermostat can withstand a load of max 13A /2900W at 230V. At higher loads the thermostat

20

WARRANTY - YOUR SAFETYVer.

2018

-A

2 yr

The product must be installed and documented in accordance with the current version of the installation guide. Installation is to be performed by an authorized electrician only.

www.heatit.comThermo-Floor AS can not be held liable for typographical errors, other errors or omittances in our information. Product specifications may change without further notice. All electrical installations must be carried out by a licensed electrician. The product must be installed in accordance with national building codes and our installers manual.

Heatit Controls AB l SE-Läkarvägen 4, 454 31 BRASTAD, SWEDEN l Phone: +47 61 18 77 77 l [email protected] – www.heatit.com

Ver. 2018-A