Every drop counts. In times of rising
customer demands on taste and in-
creasing costs of feedstock, mem-
brane filtration has been established
as the best approach to achieve high-
quality clarified beverages. The new
ANDRITZ SEPARATION DCF retains every
single drop of the beverage, while reduc-
ing costs and environmental impact at the
same time:
Lowest mechanical stress on product due to minimized process
volume
Exceptional yield thanks to operation with substances that have
a uniform,
highly viscous rheology
Top performance thanks to unique prin-ciple of overlapping and
rotating mem-
branes
Best taste thanks to closed and self-venting design avoiding any
oxygen
pick-up
Hanging shaft arrangement eliminates the risk of gases at the
membranes and
in the permeate
Highest quality product due to oval housing design ensuring
minimum resi-
dence time
Long service life by using ceramic mem- branes
Minimized operation cost thanks to re-duced energy
consumption
Environmentally friendly and without any health hazards for the
operator be-
cause filtration aids are eliminated and
waste streams reduced
Very compact and easy to install
www.andritz.com
DCF (Dynamic Cross-flow Filtration) Dynamic membrane filtration
for high-efficiency clarification of beverages
All data, information, statements, photographs, and graphic
illustrations in this lea et are without any obligation and raise
no liabilities to or form part of any sales contracts of ANDRITZ AG
or any affi liates for equipment and/or systems referred to herein.
ANDRITZ AG 2013. All rights reserved. No part of this copyrighted
work may be reproduced, modifi ed or distributed in any form or by
any means, or stored in any database or retrieval system, without
the prior written permission of ANDRITZ AG or its affi liates. Any
such unauthorized use for any purpose is a violation of the
relevant copyright laws. ANDRITZ AG, Stattegger Strasse 18, 8045
Graz, Austria
www.andritz.com
AFRICAANDRITZ Delkor (Pty.) Ltd.Phone: +27 (11) 466 2361Fax: +27
(86) 636 [email protected]
ASIAANDRITZ Singapore Pte. Ltd.Phone: +65 (6512) 1800Fax: +65
(6863) [email protected]
AUSTRALIAANDRITZ Pty. Ltd.Phone: +61 (3) 8773 4888Fax: +61 (3)
8773 [email protected]
CHINAANDRITZ (China) Ltd.Phone: +86 (757) 6663 3419Fax: +86
(757) 6663 [email protected]
EUROPEANDRITZ AGPhone: +43 (316) 6902 2318Fax: +43 (316) 6902
92318 [email protected]
NORTH AMERICAANDRITZ SEPARATION Inc.Phone: +1 (817) 465 5611Fax:
+1 (817) 468 [email protected]
SOUTH AMERICAANDRITZ SEPARATION Ltda.Phone: +55 (47) 3387
9110Fax: +55 (47) 3387 [email protected]
DCF (Dynamic Cross-fl ow Filtration) Type DCF
312/2.0DCF
312/4.0DCF
312/6.0DCF
312/8.0DCF
312/10DCF
312/12DCF
312/14DCF
312/16
Filtration surface [m]
2 4 6 8 10 12 14 16
Retentate volume [dm]
40 60 80 100 120 140 160 180
Motor [kW] 7.5 7.5 7.5 11 11 11 15 15
Typical performance
[l/h]
50 to
150
10 to
300
200 to
500
250 to
600
300 to
800
400 to
1,000
450 to
1,100
500 to
1,300
Width [mm] 850 850 850 850 850 850 850 850
Length [mm] 1,100 1,100 1,100 1,250 1,280 1,280 1,280 1,280
Height [mm] 1,800 1,870 1,930 2,100 2,250 2,350 2,480 2,550
Operatingweight [kg]
1,200 1,800 1,400 1,500 1,600 1,700 1,800 1,900
Standard design Hanging arrangement of membrane
disc stack
Ceramic membranes in different pore sizes Mono V-belt drive with
standard gearbox Lifting support for easy mounting and
replacement of membrane stack
Oval housing for minimum dead volume and plug ow
characteristics
Double jacket for heating or cooling All parts wetted by the
product in
stainless steel rather than AISI304
Full CIP capability and hygienic design Feed bottom, discharge
top for easy
emptying
Product connections: DIN 11851 EPDM gaskets, single-acting
mechani-
cal seals
Options and accessories Skid-mounted, material of
construction
better than AISI 304
Sintered metal membranes MCC and PLC Feed pump and ow meter
Concentration and temperature moni-
toring
Flow control valves, manual or automatic CIP/SIP system
EUROPEANDRITZ AG
SOUTH AMERICAANDRITZ SEPARATION Ltda.
W L
H
DCF Beverages 1.0/03.2013 GB
