Upload
others
View
21
Download
0
Embed Size (px)
Citation preview
Front coverBACK cover FO LD
FO L
D
FO LD
Wireless Made Simple.
RECORDING FROM SMART DEVICE + MONITOR
MOTION RECORDINGFROM MONITOR
1 From Pop-Up menu, tap the following icons
2 Tap the camera’s Sensitivity to OFF, LOW or HIGH (default is LOW).
3 To set up EMAIL ALERT, tap the following icons from the pop-up menu,
fill in the information fields and tap OK to save,
then < to return to the previous screen.
FROM SMART DEVICE
1 SNAPSHOTS: From LIVE VIEW , tap CAMERA Icon to capture screen images from camera selected. Snapshots will be saved to camera roll of your mobile device.
2 RECORDING: Tap RECORD icon to save video to the system’s SD Card.
LIVE VIEW
System 1 (Live Video)
Connected640x480P2P, No1, 12.67FPS
AC power cableCamera In-line Pairing Button
Phillips head screwdriver or drill may be required for installation
4.3” Touch screen Monitor
Docking station with Internet cable
(1) Outdoor cameras with multi-position brackets
(2) AC power adapters
(1) power extension cables
(1) 8 GB SD card
(1) Screw/Anchor Kit
x2
4.3”
x1
IN THE BOX
Internet(Ethernet) Cable
Connection
AC Power Input(AC power cable included)
Let’s Get Started
Model AWS225
4.3” Touch Screen MonitorDocking StationIndoor/Outdoor Camera
Tip: Plan the location of your cameras for optimal viewing and proximity to AC Power outlets, (2) power extension cables are included
NOTE: Avoid installing in a location which requires the wireless signal to pass through cement, concrete and metal structures. This will reduce the transmission range.
Pull out Stand
Reset button
Power (On/Off)
SD Card Slot
AC Power Connection
8 GB
For detailed installation and setup, please refer to the Model AWS225 complete User’s Guide available on our website: www.ALCWireless.com/support
SCAN TO VIEW
COMPLETEUSER’S GUIDE
ALCWireless.com
WirelessMade Simple.
QuickSimpleSet Up Tools
NOTE: Do not submerge in water or use monitor near water. STRANGULATION HAZARD: Infants have STRANGLED in power cords. Keep power cords more than 3 feet away from cribs. When using your equipment, always follow basic safety precautions to reduce the risk of fire, electric shock and injury to persons. Illustrations are for reference only. Actual product specifications may vary. For additional precautions and product information, please see owner’s manual at www.ALCWireless.com/support
Wireless Video Surveillance System with
4.3” Touch Screen Monitor
Rem
ote
Mon
itori
ng A
nytim
e fr
om A
nyw
here
QUICK START GUIDE
Model AWS225
1
2
3
PAIRING ADDITIONAL CAMERAS TO MONITORThe AWS225 Wireless Surveillance System supports up to four (4) wireless surveillance cameras. Use the following steps to pair each additional camera.
From the Main Menu on the Monitor, select theCAMERA SET UP icon
Select camera station to be paired
Tap the CAMERA STATION you want to pair; a 60-second timer will start.
Within 60 seconds, press the PAIRING KEY once on the camera’s power cord. The timer will stop when the camera is paired.
Go to Home Screen to view live cameras on the Monitor.
DOCKING STATION
AC power cable Included Ethernet Cable
Internet Router (not included)
MONITOR SETUP
1
2
4
3Connect the AC/DC adapter to the power input on the back of the Docking Station and plug into an electrical outlet.
Place Monitor onto the Docking Station and extend the antenna. Press and hold the POWER button on the top of the monitor for 3-4 seconds until screen illuminates.
The CAMERA(s) installed and plugged in will AUTOMATICALLY APPEAR on the Monitor, with or without Internet cable connected to a wireless network router.
For remote viewing on smart devices, the Monitor must be connected to Internet. Plug one end of the provided Internet cable into back of Docking Station and the other end into an Ethernet port on router.
To prepare for RECORDING, insert the SD card provided into the SD card slot on right side of the Monitor. Most SD card brands are supported up to 32 GB. The SD Card status icon on Monitor will indicate proper installation.
SD CardStatus
BatteryStatus
Internet Connectionstatus
RecordingStatus
Camera NumberSignal Status
On-screen Display
NOTE: Cameras are IP66 rated for indoor/outdoor use. For outdoor use it is recommended to install camera under shelter to protect from direct exposure to sunlight and other environmental elements. Avoid pointing a camera directly at any bushes or tree branches or objects that may naturally move due to winds.
x3x2 x4EXPANDABLE up to 4 cameras
Ask your retailer for accessory cameras (Model AWSC35) compatible with this system.
1 2Secure the multi-position camera bracket to a stable surface, ceiling or wall.
Loosen the T-Bolt on the camera bracket and adjust viewing angle using the Thumb Screw to rotate position.
43 Align hole on bottom of camera with T-Bolt to install camera. Screw antenna into rear of camera.
Attach power cable to power extension cord AC Adapter. Plug into electrical outlet.
ANDROID REMOTE VIEWING APPLE REMOTE VIEWING
1
2
FREE APP DOWNLOAD
From your Android device, DOWNLOAD and INSTALL the free ALC Observer App.
Turn on the Wi-Fi setting on your Android device and set it to your home network.
The App will start the connection process. Tap Live View.
Connect as shown in the Docking Station section, above.
Tap Set Up Wizard on screen for direct wireless connection of camera to App.
3
4
5
ANDROID DEVICE SETUP
NOTE: Screen shots and icons may vary due to continuous updates to App and software development.
1
2
From your Apple device, DOWNLOAD and INSTALL the free ALC Observer App.
The App will start the connection process.
Once the screen indicates the camera is connected, tap Live View.
Connect as shown in the Docking Station section, above.
Tap Set Up Wizard on screen for direct wireless connection of camera to App.
3
4
5
APPLE DEVICE SETUP
FREE APP DOWNLOAD
NOTE: When the Monitor is placed in the Docking Station and “CHARGE ONLY” is selected, you can still access your live video from smartphone(s) or tablet(s) as long as those devices are also connected to the same network as the Monitor.
NOTE: If you are having a difficult time connecting your smart device for remote viewing, please visit www.ALCWireless.com/support to view the latest guides.
x1
(1) Antenna
Quick Start Guide
Antenna
Multi-positionCamera Bracket
Thumb screw
Camera Bracket T-Bolt
AC Power cord
In-line PairingButton
InfraredLED sensors
x1
AC power cableCamera In-line Pairing Button