2
1. Spill Glaze the soap dispenser with clear glaze. Apply two coats of crackle glaze to the bottom 2. Apply a band of Heirloom silver just above the crackle glaze using 3 coats. Allow drying between coats. 3. Finally apply one coat of your chosen Duncan crystal glaze to the top section. Once the first coat is dry shake the pot of crystal glaze and apply a final coat. 4. Once dry stilt and fire to cone 06. www.andyskinner.org http://andyskinnerorg.blogspot.com

Andy Skinner Mixed Glaze Dispenser

Embed Size (px)

DESCRIPTION

Use mixed Duncan glazes to achieve stunning effects.

Citation preview

Page 1: Andy Skinner Mixed Glaze Dispenser

1. Spill Glaze the soap dispenserwith clear glaze.Apply two coats of crackle glazeto the bottom

2. Apply a band of Heirloom silverjust above the crackle glaze using3 coats. Allow drying betweencoats.

3. Finally apply one coat of yourchosen Duncan crystal glaze tothe top section. Once the first coatis dry shake the pot of crystalglaze and apply a final coat.

4. Once dry stilt and fire to cone06.

www.andyskinner.org http://andyskinnerorg.blogspot.com

Page 2: Andy Skinner Mixed Glaze Dispenser

Materials usedCR 823 Celadon Crackle GlazeSY 1025 Heirloom SilverCR 904 Fudge Crystal Glaze

BisqueDN BQ 21994 Soap Dispenser1/4” Mop Brush