®

PATENT

PENDING

© MIS Corporation. All Rights Reserved.

Angulated Multi-Unit System

The new MIS angulated multi-unit abutment provides an added array of simplicity, compatibility, versatility and flexibility to its already successful line of abutments. The angulated multi-unit abutments fit all our standard implants and are designed for all screw-retained full and partial prosthetic appliances. The new features include 17-degree and 30-degree angulations as well as an hexagonal connection. The low profile connections enable exceptional aesthetic and a myriad of insertion angles.

2.

All rights reserved. No part of this publication may be reproduced, transcribed, stored in an electronic retrieval system, translated into any language or computer language, or be transmitted in any form whatsoever, without the prior written consent of the publisher. Warning: Only a licensed dentists should use these products.

3.

SimplicitySimple impression and laboratory procedures.

Versatility

Flexibility

Used in all screw retained full and partial denture appliances.

Where different angulations are needed.

4.

Characteristics.

Patent Pending

Angulated standard platform.

Features 17- and 30-degree angulation.

2.6mm 1.3mm

MA-ANH17

17º

MA-ANH30

3.2mm

1mm

30º

Extensive insertion path

The 17° multi-unit abutment allows a maximum 64° insertion path.

Recommended tightening moment of 30 Ncm.*

The 30° multi-unit abutment allows a maximum 90° insertion path.

90°^

^

^ ^

64°

Low profile enables exceptional aesthetic.

15º conic provides easier paths of insertion, especially in areas of limited space.

MA-ANH30MA-ANH17

5.

1.2mm 1.2mm

15º15º

6.

Characteristics. (continued)

Features an anti–rotational hexagon.

The multi-unit abutments are made of

titanium alloy Ti 6Al-4V ELI. The multi-unit

gripping bar is made of ‘‘Delrine ‘‘. The

multi-unit abutment can be connected

in any one of six possible positions on

the fixture head.

7.

Restorative components.

Components:

Abutment AnalogMA-RSM10

Titanium Temporary CylinderMM-T0450

Direct Plastic CylinderMM-CP045

Impression Coping for Closed TrayMM-IT450

Healing CapMH-00450

Multi-Unit ScrewdriverMT-MUK02

Multi-Unit Direct Prosthetic Gold ScrewMM-G0330

Multi-Unit Direct Prosthetic Titanium ScrewMM-S0330

Direct GoldMM-MG450

Multi-Unit Bar Gold CopingMH-BGC45

Impression Coping for Opened TrayMM-IO450

Prosthetic Possibilities.

8

Low profile enables increased insertion possibilities.

Screw-retaind

Bar over denture

Standard impression method.

Standard restorative components.

Improved aesthetic.

Improved prosthetic support.

Increased inter-implant distance.

Better implant anchorage.

Screw-retained prosthetic

9.

All rights reserved. No part of this publication may be reproduced, transcribed, stored in an electronic retrieval system, translated into any language or computer language, or be transmitted in any form whatsoever, without the prior written consent of the publisher. Warning: Only a licensed dentist should use these products.

0297

®

MIS’s Quality System complies with international quality standards: ISO 13485:2003 - Quality Management System for Medical Devices, ISO 9001: 2008 – Quality Management System and CE Directive for Medical Devices 9342//EEC. MIS’s products are cleared for marketing in the USA and CE approved.

MC-MUA08 Rev.3

MIS Implants Technologies Ltd. www.mis-implants.com